summaryrefslogtreecommitdiff
path: root/drivers/target/iscsi
AgeCommit message (Collapse)AuthorFilesLines
2013-09-11target: Update copyright ownership/year information to 2013Nicholas Bellinger18-56/+20
Update copyright ownership/year information for target-core, loopback, iscsi-target, tcm_qla2xx, vhost and iser-target. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-11iscsi-target: Bump default TCP listen backlog to 256Nicholas Bellinger2-1/+2
This patch bumps the default TCP listen backlog within iscsit_setup_np() from 5 to 256, in order to reduce the overall latency caused by a small backlog with 100's of simultaneous login attempts directed to the same single network portal. Also add a ISCSIT_TCP_BACKLOG macro in iscsi_target_core.h. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-11iscsi-target; Bump default CmdSN Depth to 64Nicholas Bellinger1-1/+1
This patch bumps the default TA_DEFAULT_CMDSN_DEPTH from 16 -> 64, which is closer to a sane default for larger pipes @ 10 Gb/sec with traditional iSCSI, or @ 40/56 Gb/sec Ethernet/Infiniband with iSCSI Extentions for RDMA. There is really no downside to increasing this default value for 1 Gb/sec. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-11iscsi-target: Remove unnecessary wait_for_completion in iscsi_get_thread_setNicholas Bellinger1-16/+3
This patch removes an unnecessary wait_for_completion within iscsi_get_thread_set(), that would wait for 1 second before trying to obtain an inactive struct iscsi_thread_set from iscsi_get_ts_from_inactive_list(). Since iscsi_allocate_thread_sets() will already be adding the newly allocated iscsi_thread_set to the inactive list directly, there is no need to wait here. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-11iscsi-target: Add thread_set->ts_activate_sem + use common deallocateNicholas Bellinger2-85/+59
This patch removes the iscsi_thread_set->[rx,tx]_post_start_comp that was originally used synchronize startup between rx and tx threads within a single thread_set. Instead, use a single ->ts_activate_sem in iscsi_activate_thread_set() to wait for both processes to awake in the RX/TX pre handlers. Also, go ahead and refactor thread_set deallocate code into a common iscsi_deallocate_thread_one(), and update iscsi_deallocate_thread_sets() and iscsi_deallocate_extra_thread_sets() use this code v3 changes: - Make iscsi_deallocate_thread_one defined as static (Fengguang) v2 changes: - Set ISCSI_THREAD_SET_ACTIVE before calling complete in iscsi_activate_thread_set - Protect ts->conn sanity checks with ->ts_state_lock in RX/TX pre handlers - Add ->ts_activate_sem to save extra context switches per iscsi_activate_thread_set() call. - Refactor thread_set shutdown into iscsi_deallocate_thread_one() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-11iscsi-target: Fix race with thread_pre_handler flush_signals + ↵Nicholas Bellinger1-6/+13
ISCSI_THREAD_SET_DIE This patch addresses an long standing race in iscsi_[rx,tx]_thread_pre_handler() use of flush_signals(), and between iscsi_deallocate_extra_thread_sets() setting ISCSI_THREAD_SET_DIE before calling kthread_stop(). It addresses the issue by both holding ts_state_lock before calling send_sig() in iscsi_deallocate_extra_thread_sets(), as well as only calling flush_signals() when ts->status != ISCSI_THREAD_SET_DIE within iscsi_[rx,tx]_thread_pre_handler() code. v2 changes: - Add explicit complete(&ts->[rx,tx]_start_comp); before kthread_stop() in iscsi_deallocate_extra_thread_sets() - Drop left-over send_sig() calls in iscsi_deallocate_extra_thread_sets() - Add kthread_should_stop() check in iscsi_signal_thread_pre_handler() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10iscsi-target: Convert to per-cpu ida_alloc + ida_free command mapNicholas Bellinger3-11/+46
This patch changes iscsi-target to use transport_alloc_session_tags() pre-allocation logic for per-cpu session tag pooling with internal ida_alloc() + ida_free() calls based upon the saved se_cmd->map_tag id. This includes tag pool setup based upon per NodeACL queue_depth after locating se_node_acl in iscsi_target_locate_portal(). Also update iscsit_allocate_cmd() and iscsit_release_cmd() to use percpu_ida_alloc() and percpu_ida_free() respectively. v5 changes; - Convert to percpu_ida.h include v2 changes: - Fix bug with SessionType=Discovery in iscsi_target_locate_portal() Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-10iscsi/iser-target: Convert to command priv_size usageNicholas Bellinger5-33/+7
This command converts iscsi/isert-target to use allocations based on iscsit_transport->priv_size within iscsit_allocate_cmd(), instead of using an embedded isert_cmd->iscsi_cmd. This includes removing iscsit_transport->alloc_cmd() usage, along with updating isert-target code to use iscsit_priv_cmd(). Also, remove left-over iscsit_transport->release_cmd() usage for direct calls to iscsit_release_cmd(), and drop the now unused lio_cmd_cache and isert_cmd_cache. Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-10iscsi-target: Remove left-over iscsi_target_do_login_ioNicholas Bellinger1-9/+1
There is no need for iscsi_target_do_login_io() anymore in modern code, so go ahead and call iscsi_target_do_tx_login_io() directly within iscsi_target_do_login(). Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10iscsi-target: Add sk->sk_state_change to cleanup after TCP failureNicholas Bellinger2-0/+103
This patch adds a sock->sk_state_change() -> iscsi_target_sk_state_change() callback in order to handle transient TCP failures during the login process, where sock->sk_data_ready() -> iscsi_target_sk_data_ready() may not be called to release connection resources, and relinquish tpg->np_login_lock via iscsit_deaccess_np() It performs the sk->sk_state check using iscsi_target_sk_state_check() to look for TCP_CLOSE_WAIT + TCP_CLOSE, and invokes schedule_delayed_work() -> iscsi_target_do_cleanup() to perform the remaining cleanup from process context. It adds an explicit sk_state_check to iscsi_target_do_login() in order to determine a state failure when iscsi_target_sk_state_change() may not be able to proceed before LOGIN_FLAGS_READY=1 is set. Also use sk->sk_sndtimeo -> sk->sk_rcvtimeo settings during login to iscsi_target_set_sock_callbacks(), and revert back post login to use MAX_SCHEDULE_TIMEOUT in iscsi_target_restore_sock_callbacks(). Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10iscsi-target: Add login negotiation multi-plexing supportNicholas Bellinger4-10/+234
This patch adds support for login negotiation multi-plexing in iscsi-target code. This involves handling the first login request PDU + payload and login response PDU + payload within __iscsi_target_login_thread() process context, and then changing struct sock->sk_data_ready() so that all subsequent exchanges are handled by workqueue process context, to allow other incoming login requests to be received in parallel by __iscsi_target_login_thread(). Upon login negotiation completion (or failure), ->sk_data_ready() is replaced with the original kernel sockets handler saved in iscsi_conn->orig_data_ready. v3 changes: - Convert iscsi_target_sk_data_ready() lock access to write[lock,unlock]_bh() - Only clear LOGIN_FLAGS_READ_ACTIVE when iscsi_target_do_login() returns zero - Add LOGIN_FLAGS_READY + LOGIN_FLAGS_CLOSED bit checks to iscsi_target_sk_data_ready() - Make INIT_DELAYED_WORK() + iscsi_target_set_sock_callbacks() setup happen earlier by moving from iscsi_target_start_negotiation() into iscsi_target_locate_portal() - Set LOGIN_FLAGS_READY bit in iscsi_target_start_negotiation() after iscsi_target_do_login() returns zero. v2 changes: - Add login_timer in iscsi_target_do_login_rx() to avoid possible endless sleep with MSG_WAITALL for traditional iscsi-target in certain network configurations. - Convert lprintk() -> pr_debug() - Remove forward declarations of iscsi_target_set_sock_callbacks(), iscsi_target_restore_sock_callbacks() and iscsi_target_sk_data_ready() - Make iscsi_target_set_sock_callbacks + iscsi_target_restore_sock_callbacks() static (Fengguang) - Make iscsi_target_do_login_rx() safe for iser-target w/o conn->sock Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10iscsi-target: Prepare login code for multi-plexing supportNicholas Bellinger7-107/+154
This patch prepares the iscsi-target login code for multi-plexing support. This includes: - Adding iscsi_tpg_np->tpg_np_kref + iscsit_login_kref_put() for handling callback of iscsi_tpg_np->tpg_np_comp - Adding kref_put() in iscsit_deaccess_np() - Adding kref_put() and wait_for_completion() in iscsit_reset_np_thread() - Refactor login failure path release logic into iscsi_target_login_sess_out() - Update __iscsi_target_login_thread() to handle iscsi_post_login_handler() asynchronous completion - Add shutdown parameter for iscsit_clear_tpg_np_login_thread*() v3 changes: - Convert iscsi_portal_group->np_login_lock to ->np_login_sem - Add LOGIN_FLAGS definitions v2 changes: - Remove duplicate call to iscsi_post_login_handler() in __iscsi_target_login_thread() - Drop unused iscsi_np->np_login_tpg Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-08-13iscsi-target: ST response on IN6ADDR_ANY socketChris Leech3-16/+16
Odd little issue, found that if you create an IPv6 portal bound to the IN6ADDR_ANY wildcard address it will accept IPv4 connections (as long as bindv6only isn't set globally) but respond to SendTargets requests with an IPv4-mapped IPv6 address. Example over loopback: In targetcli create a wildcard IPv6 portal /iscsi/iqn.../portals/> create :: Which should create a portal [::]:3260 Initiate SendTargets discovery to the portal using an IPv4 address # iscsiadm -m discovery -t st -p 127.0.0.1 The response formats TargetAddress as [::ffff:127.0.0.1]:3260,1 This still works and uses v4 on the network between two v6 sockets, but only if the initiator supports IPv6 with v4-mapped addresses. This change detects v4-mapped address on v6 sockets for the wildcard case, and instead formats the TargetAddress response as an IPv4 address. In order to not further complicate iscsit_build_sendtargets_response, I've actually simplified it by moving the bracket wrapping of IPv6 address into iscsit_accept_np where local_ip and login_ip strings are set. That also simplifies iscsi_stat_tgt_attr_show_attr_fail_intr_addr. Side effect of the string format change is that lio_target_nacl_show_info will now print login_ip bracket wrapped for IPv6 connections, as will a few debug prints. Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-08-13target: replace strict_strto*() with kstrto*()Jingoo Han3-6/+6
The usage of strict_strtoul() and strict_strtoull() is not preferred, because strict_strtoul() and strict_strtoull() are obsolete. Thus, kstrtoul() and kstrtoull() should be used. v2: Fix incorrect return in ft_add_tpg (Fengguang) Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-11Merge branch 'for-next' of ↵Linus Torvalds10-427/+619
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Lots of activity this round on performance improvements in target-core while benchmarking the prototype scsi-mq initiator code with vhost-scsi fabric ports, along with a number of iscsi/iser-target improvements and hardening fixes for exception path cases post v3.10 merge. The highlights include: - Make persistent reservations APTPL buffer allocated on-demand, and drop per t10_reservation buffer. (grover) - Make virtual LUN=0 a NULLIO device, and skip allocation of NULLIO device pages (grover) - Add transport_cmd_check_stop write_pending bit to avoid extra access of ->t_state_lock is WRITE I/O submission fast-path. (nab) - Drop unnecessary CMD_T_DEV_ACTIVE check from transport_lun_remove_cmd to avoid extra access of ->t_state_lock in release fast-path. (nab) - Avoid extra t_state_lock access in __target_execute_cmd fast-path (nab) - Drop unnecessary vhost-scsi wait_for_tasks=true usage + ->t_state_lock access in release fast-path. (nab) - Convert vhost-scsi to use modern se_cmd->cmd_kref TARGET_SCF_ACK_KREF usage (nab) - Add tracepoints for SCSI commands being processed (roland) - Refactoring of iscsi-target handling of ISCSI_OP_NOOP + ISCSI_OP_TEXT to be transport independent (nab) - Add iscsi-target SendTargets=$IQN support for in-band discovery (nab) - Add iser-target support for in-band discovery (nab + Or) - Add iscsi-target demo-mode TPG authentication context support (nab) - Fix isert_put_reject payload buffer post (nab) - Fix iscsit_add_reject* usage for iser (nab) - Fix iscsit_sequence_cmd reject handling for iser (nab) - Fix ISCSI_OP_SCSI_TMFUNC handling for iser (nab) - Fix session reset bug with RDMA_CM_EVENT_DISCONNECTED (nab) The last five iscsi/iser-target items are CC'ed to stable, as they do address issues present in v3.10 code. They are certainly larger than I'd like for stable patch set, but are important to ensure proper REJECT exception handling in iser-target for 3.10.y" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits) iser-target: Ignore non TEXT + LOGOUT opcodes for discovery target: make queue_tm_rsp() return void target: remove unused codes from enum tcm_tmrsp_table iscsi-target: kstrtou* configfs attribute parameter cleanups iscsi-target: Fix tfc_tpg_auth_cit configfs length overflow iscsi-target: Fix tfc_tpg_nacl_auth_cit configfs length overflow iser-target: Add support for ISCSI_OP_TEXT opcode + payload handling iser-target: Rename sense_buf_[dma,len] to pdu_[dma,len] iser-target: Add vendor_err debug output target: Add (obsolete) checking for PMI/LBA fields in READ CAPACITY(10) target: Return correct sense data for IO past the end of a device target: Add tracepoints for SCSI commands being processed iser-target: Fix session reset bug with RDMA_CM_EVENT_DISCONNECTED iscsi-target: Fix ISCSI_OP_SCSI_TMFUNC handling for iser iscsi-target: Fix iscsit_sequence_cmd reject handling for iser iscsi-target: Fix iscsit_add_reject* usage for iser iser-target: Fix isert_put_reject payload buffer post iscsi-target: missing kfree() on error path iscsi-target: Drop left-over iscsi_conn->bad_hdr target: Make core_scsi3_update_and_write_aptpl return sense_reason_t ...
2013-07-08target: make queue_tm_rsp() return voidJoern Engel1-2/+1
The return value wasn't checked by any of the callers. Assuming this is correct behaviour, we can simplify some code by not bothering to generate it. nab: Add srpt_queue_data_in() + srpt_queue_tm_rsp() nops around srpt_queue_response() void return Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-08target: remove unused codes from enum tcm_tmrsp_tableJoern Engel1-2/+0
Three have been checked for but were never set. Remove the dead code. Also renumbers the remaining ones to a) get rid of the holes after the removal and b) avoid a collision between TMR_FUNCTION_COMPLETE==0 and the uninitialized case. If we failed to set a code, we should rather fall into the default case then return success. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-08iscsi-target: kstrtou* configfs attribute parameter cleanupsJörn Engel1-21/+32
This patch includes the conversion of iscsi-target configfs attributes for NetworkPortal, NodeACL, TPG, IQN and Discovery groups to use kstrtou*() instead of simple_strtou*(). It also cleans up new-line usage during iscsi_tpg_param_store_##name to use isspace(). Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-08iscsi-target: Fix tfc_tpg_auth_cit configfs length overflowNicholas Bellinger1-1/+1
This patch fixes another potential buffer overflow while processing iscsi_node_auth input for configfs attributes in v3.11 for-next TPG tfc_tpg_auth_cit context. Reported-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-08iscsi-target: Fix tfc_tpg_nacl_auth_cit configfs length overflowJörn Engel1-1/+1
This patch fixes a potential buffer overflow while processing iscsi_node_auth input for configfs attributes within NodeACL tfc_tpg_nacl_auth_cit context. Signed-off-by: Joern Engel <joern@logfs.org> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-08iser-target: Fix session reset bug with RDMA_CM_EVENT_DISCONNECTEDNicholas Bellinger1-0/+1
This patch addresses a bug where RDMA_CM_EVENT_DISCONNECTED may occur before the connection shutdown has been completed by rx/tx threads, that causes isert_free_conn() to wait indefinately on ->conn_wait. This patch allows isert_disconnect_work code to invoke rdma_disconnect when isert_disconnect_work() process context is started by client session reset before isert_free_conn() code has been reached. It also adds isert_conn->conn_mutex protection for ->state within isert_disconnect_work(), isert_cq_comp_err() and isert_free_conn() code, along with isert_check_state() for wait_event usage. (v2: Add explicit iscsit_cause_connection_reinstatement call during isert_disconnect_work() to force conn reset) Cc: stable@vger.kernel.org # 3.10+ Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-07iscsi-target: Fix ISCSI_OP_SCSI_TMFUNC handling for iserNicholas Bellinger1-2/+10
This patch adds target_get_sess_cmd reference counting for iscsit_handle_task_mgt_cmd(), and adds a target_put_sess_cmd() for the failure case. It also fixes a bug where ISCSI_OP_SCSI_TMFUNC type commands where leaking iscsi_cmd->i_conn_node and eventually triggering an OOPs during struct isert_conn shutdown. Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-07iscsi-target: Fix iscsit_sequence_cmd reject handling for iserNicholas Bellinger4-31/+59
This patch moves ISCSI_OP_REJECT failures into iscsit_sequence_cmd() in order to avoid external iscsit_reject_cmd() reject usage for all PDU types. It also updates PDU specific handlers for traditional iscsi-target code to not reset the session after posting a ISCSI_OP_REJECT during setup. (v2: Fix CMDSN_LOWER_THAN_EXP for ISCSI_OP_SCSI to call target_put_sess_cmd() after iscsit_sequence_cmd() failure) Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-07iscsi-target: Fix iscsit_add_reject* usage for iserNicholas Bellinger6-173/+120
This patch changes iscsit_add_reject() + iscsit_add_reject_from_cmd() usage to not sleep on iscsi_cmd->reject_comp to address a free-after-use usage bug in v3.10 with iser-target code. It saves ->reject_reason for use within iscsit_build_reject() so the correct value for both transport cases. It also drops the legacy fail_conn parameter usage throughput iscsi-target code and adds two iscsit_add_reject_cmd() and iscsit_reject_cmd helper functions, along with various small cleanups. (v2: Re-enable target_put_sess_cmd() to be called from iscsit_add_reject_from_cmd() for rejects invoked after target_get_sess_cmd() has been called) Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-04iscsi-target: missing kfree() on error pathDan Carpenter1-0/+1
Fix-up breakage in iscsit_build_sendtargets_response() from v3.11 changes, and free "payload" before returning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-04iscsi-target: Drop left-over iscsi_conn->bad_hdrNicholas Bellinger2-7/+0
All REJECT response setup of the rejected payload is now done using on-demand cmd->buf_ptr allocations. Go ahead and remove dead iscsi_conn->bad_hdr usage rx_opcode path Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-04iscsi-target: Add demo-mode TPG authentication context supportNicholas Bellinger3-1/+139
This patch adds a auth configfs group context following existing explict NodeACL and discovery auth within: /sys/kernel/config/target/iscsi/$TARGETNAME/$TPGT/auth/ This patch allows these attributes to be used for CHAP authentication an TPG is configured in demo-mode (generate_node_acl=1). Note this authentication information takes precedence over NodeACL authentication when struct se_node_acl->dynamic_node_acl is present. Cc: Dax Kelson <dkelson@gurulabs.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-04iscsi-target: Add IFC_SENDTARGETS_SINGLE supportNicholas Bellinger2-0/+29
This patch changes ISCSI_OP_TEXT handling of SendTargets=[iqn.,eui.] payloads to return explicit discovery information. It adds checks to iscsit_process_text_cmd() and adds the special single $TARGETNAME discovery case in iscsit_build_sendtargets_response() code. Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-04iscsi-target: Move sendtargets parsing into iscsit_process_text_cmdNicholas Bellinger3-20/+35
This patch moves ISCSI_OP_TEXT PDU buffer sanity checks to iscsit_process_text_cmd() code, so that it can be shared with iser-target code. It adds IFC_SENDTARGETS_ALL + iscsi_cmd->text_in_ptr in order to save text payload for ISCSI_OP_TEXT_RSP, and updates iscsit_release_cmd() to assigned memory. Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-04iscsi-target: Allow ->MaxXmitDataSegmentLength assignment for iser discoveryNicholas Bellinger1-3/+0
This patch changes iscsi_set_connection_parameters() to allow conn_ops->MaxXmitDataSegmentLength assignement to occur during in-band iser send-targets discovery, as this value is required by TEXT response processing code. Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-26iscsi-target: Refactor ISCSI_OP_TEXT_RSP TX handlingNicholas Bellinger1-35/+42
This patch refactoring existing iscsit_send_text_rsp() in order to handle iscsi_text_rsp payloads in a transport specific manner. This includes the addition of iscsit_build_text_rsp() to build the response payload and initialize ISCSI_OP_TEXT_RSP. v2: Make iscsit_build_text_rsp() determine extra padding bytes, and drop legacy padding calculation for traditional iSCSI text responses within iscsit_send_text_rsp() Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-25iscsi-target: Refactor ISCSI_OP_TEXT RX handlingNicholas Bellinger1-68/+90
This patch refactors ISCSI_OP_TEXT handling within iscsi-target in order to handle iscsi_text payloads in a transport specific manner. This includes splitting current iscsit_handle_text_cmd() into iscsit_setup_text_cmd() and iscsit_process_text_cmd() calls, and makes iscsit_handle_text_cmd be only used internally by traditional iscsi socket calls. Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-25iscsi/isert-target: Refactor ISCSI_OP_NOOP RX handlingNicholas Bellinger1-85/+89
This patch refactors ISCSI_OP_NOOP handling within iscsi-target in order to handle iscsi_nopout payloads in a transport specific manner. This includes splitting existing iscsit_handle_nop_out() into iscsit_setup_nop_out() and iscsit_process_nop_out() calls, and makes iscsit_handle_nop_out() be only used internally by traditional iscsi socket calls. Next update iser-target code to use new callers and add FIXME for the handling iscsi_nopout payloads. Also fix reject response handling in iscsit_setup_nop_out() to use proper iscsit_add_reject_from_cmd(). v2: Fix uninitialized iscsit_handle_nop_out() payload_length usage (Fengguang) v3: Remove left-over dead code in iscsit_setup_nop_out() (DanC) Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-21iscsi-target: Remove left over v3.10-rc debug printksNicholas Bellinger3-8/+0
Reported-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-21target/iscsi: Fix op=disable + error handling cases in np_store_iserAndy Grover1-11/+14
Writing 0 when iser was not previously enabled, so succeed but do nothing so that user-space code doesn't need a try: catch block when ib_isert logic is not available. Also, return actual error from add_network_portal using PTR_ERR during op=enable failure. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-21iscsi-target: Avoid unnecessary t_state_lock during unsolicited data-out checkNicholas Bellinger1-6/+0
In modern iscsi-target code, the setup and I/O submission is done within a single process context, so there is no need to acquire se_cmd->t_state_lock while checking SCF_SUPPORTED_SAM_OPCODE for determining when unsolicited data-out should be dumped. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@kernel.org> Cc: Kent Overstreet <koverstreet@google.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Moussa Ba <moussaba@micron.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target/iscsi: don't corrupt bh_count in iscsit_stop_time2retain_timer()Jörn Engel1-2/+2
Here is a fun one. Bug seems to have been introduced by commit 140854cb, almost two years ago. I have no idea why we only started seeing it now, but we did. Rough callgraph: core_tpg_set_initiator_node_queue_depth() `-> spin_lock_irqsave(&tpg->session_lock, flags); `-> lio_tpg_shutdown_session() `-> iscsit_stop_time2retain_timer() `-> spin_unlock_bh(&se_tpg->session_lock); `-> spin_lock_bh(&se_tpg->session_lock); `-> spin_unlock_irqrestore(&tpg->session_lock, flags); core_tpg_set_initiator_node_queue_depth() used to call spin_lock_bh(), but 140854cb changed that to spin_lock_irqsave(). However, lio_tpg_shutdown_session() still claims to be called with spin_lock_bh() held, as does iscsit_stop_time2retain_timer(): * Called with spin_lock_bh(&struct se_portal_group->session_lock) held Stale documentation is mostly annoying, but in this case the dropping the lock with the _bh variant is plain wrong. It is also wrong to drop locks two functions below the lock-holder, but I will ignore that bit for now. After some more locking and unlocking we eventually hit this backtrace: ------------[ cut here ]------------ WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0xe8/0x100() Pid: 24645, comm: lio_helper.py Tainted: G O 3.6.11+ Call Trace: [<ffffffff8103e5ff>] warn_slowpath_common+0x7f/0xc0 [<ffffffffa040ae37>] ? iscsit_inc_conn_usage_count+0x37/0x50 [iscsi_target_mod] [<ffffffff8103e65a>] warn_slowpath_null+0x1a/0x20 [<ffffffff810472f8>] local_bh_enable_ip+0xe8/0x100 [<ffffffff815b8365>] _raw_spin_unlock_bh+0x15/0x20 [<ffffffffa040ae37>] iscsit_inc_conn_usage_count+0x37/0x50 [iscsi_target_mod] [<ffffffffa041149a>] iscsit_stop_session+0xfa/0x1c0 [iscsi_target_mod] [<ffffffffa0417fab>] lio_tpg_shutdown_session+0x7b/0x90 [iscsi_target_mod] [<ffffffffa033ede4>] core_tpg_set_initiator_node_queue_depth+0xe4/0x290 [target_core_mod] [<ffffffffa0409032>] iscsit_tpg_set_initiator_node_queue_depth+0x12/0x20 [iscsi_target_mod] [<ffffffffa0415c29>] lio_target_nacl_store_cmdsn_depth+0xa9/0x180 [iscsi_target_mod] [<ffffffffa0331b49>] target_fabric_nacl_base_attr_store+0x39/0x40 [target_core_mod] [<ffffffff811b857d>] configfs_write_file+0xbd/0x120 [<ffffffff81148f36>] vfs_write+0xc6/0x180 [<ffffffff81149251>] sys_write+0x51/0x90 [<ffffffff815c0969>] system_call_fastpath+0x16/0x1b ---[ end trace 3747632b9b164652 ]--- As a pure band-aid, this patch drops the _bh. Signed-off-by: Joern Engel <joern@logfs.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handlingNicholas Bellinger4-26/+50
With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31iscsi-target: fix heap buffer overflow on errorKees Cook2-6/+6
If a key was larger than 64 bytes, as checked by iscsi_check_key(), the error response packet, generated by iscsi_add_notunderstood_response(), would still attempt to copy the entire key into the packet, overflowing the structure on the heap. Remote preauthentication kernel memory corruption was possible if a target was configured and listening on the network. CVE-2013-2850 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-12iscsi-target: Fix typos in RDMAEXTENSIONS macro usageNicholas Bellinger2-6/+6
This patch fixes a handful of typos in 'RDMAEXTENTIONS' -> 'RDMAEXTENSIONS' macro usage. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-08iscsi-target: Fix processing of OOO commandsShlomo Pongratz1-3/+4
Fix two issues in OOO commands processing done at iscsit_attach_ooo_cmdsn. Handle command serial numbers wrap around by using iscsi_sna_lt and not regular comparisson. The routine iterates until it finds an entry whose serial number is greater than the serial number of the new one, thus the new entry should be inserted before that entry and not after. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-04iscsi-target: Make buf param of iscsit_do_crypto_hash_buf() const void *Geert Uytterhoeven1-34/+23
Make the "buf" input param of iscsit_do_crypto_hash_buf() "const void *". This allows to remove lots of casts in its callers. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-04iscsi-target: Fix NULL pointer dereference in iscsit_send_rejectNicholas Bellinger1-3/+3
Fix up a NULL pointer dereference regression in iscsit_send_reject() introduced by from commit 2ec5a8c11. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Add iser network portal attributeNicholas Bellinger1-0/+79
This patch adds a new network portal attribute for iser, that lives under existing iscsi-target configfs layout at: /sys/kernel/config/target/iscsi/$TARGETNAME/$TPGT/np/$PORTAL/iser When lio_target_np_store_iser() is enabled, iscsit_tpg_add_network_portal() will attempt to start an rdma_cma network portal for iser-target, only if the external ib_isert module transport has been loaded. When disabled, iscsit_tpg_del_network_portal() will cease iser login service on the network portal, and release any external ib_isert module reference. v4 changes: - Add request_module for ib_isert to lio_target_np_store_iser() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Refactor TX queue logic + export response PDU creationNicholas Bellinger4-304/+370
This patch refactors TX immediate + response queue handling to use the new iscsit_transport API callers, and exports the necessary traditional iscsi PDU response creation functions for iser-target to utilize. This includes: - Add iscsit_build_datain_pdu() for DATAIN PDU init + convert iscsit_build_datain_pdu() - Add iscsit_build_logout_rsp() for LOGOUT_RSP PDU init + convert iscsit_send_logout() - Add iscsit_build_nopin_rsp() for NOPIN_RSP PDU init + convert iscsit_send_nopin() - Add iscsit_build_rsp_pdu() for SCSI_RSP PDU init + convert iscsit_send_response() - Add iscsit_build_task_mgt_rsp for TM_RSP PDU init + convert iscsit_send_task_mgt_rsp() - Refactor immediate queue state switch into iscsit_immediate_queue() - Convert handle_immediate_queue() to use iscsit_transport caller - Refactor response queue state switch into iscsit_response_queue() - Convert handle_response_queue to use iscsit_transport caller - Export iscsit_logout_post_handler(), iscsit_increment_maxcmdsn() and iscsit_tmr_post_handler() for external transport module usage v5 changes: - Fix solicited NopIN handling with RDMAExtensions=No (nab) v3 changes: - Add iscsit_build_reject for REJECT PDU init + convert iscsit_send_reject() v2 changes: - Add iscsit_queue_rsp() for iscsit_transport->iscsit_queue_data_in() and iscsit_transport->iscsit_queue_status() - Update lio_queue_data_in() to use ->iscsit_queue_data_in() - Update lio_queue_status() to use ->iscsit_queue_status() - Use mutex_trylock() in iscsit_increment_maxcmdsn() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Refactor RX PDU logic + export request PDU handlingNicholas Bellinger8-204/+346
This patch refactors existing traditional iscsi RX side PDU handling to use iscsit_transport, and exports the necessary logic for external transport modules. This includes: - Refactor iscsit_handle_scsi_cmd() into PDU setup / processing - Add updated iscsit_handle_scsi_cmd() for tradtional iscsi code - Add iscsit_set_unsoliticed_dataout() wrapper - Refactor iscsit_handle_data_out() into PDU check / processing - Add updated iscsit_handle_data_out() for tradtional iscsi code - Add iscsit_handle_nop_out() + iscsit_handle_task_mgt_cmd() to accept pre-allocated struct iscsi_cmd - Add iscsit_build_r2ts_for_cmd() caller for iscsi_target_transport to handle ISTATE_SEND_R2T for TX immediate queue - Refactor main traditional iscsi iscsi_target_rx_thread() PDU switch into iscsi_target_rx_opcode() using iscsit_allocate_cmd() - Turn iscsi_target_rx_thread() process context into NOP for ib_isert side work-queue. v5 changes: - Make iscsit_handle_scsi_cmd() static (Fengguang) - Fix iscsit_handle_scsi_cmd() exception se_cmd leak (nab) v3 changes: - Add extra target_put_sess_cmd call in iscsit_add_reject_from_cmd after completion v2 changes: - Disable iscsit_ack_from_expstatsn() usage for RDMAExtentions=Yes - Disable iscsit_allocate_datain_req() usage for RDMAExtentions=Yes - Add target_get_sess_cmd() reference counting to iscsit_setup_scsi_cmd() - Add TFO->lio_check_stop_free() fabric API caller - Add export of iscsit_stop_dataout_timer() symbol - Add iscsit_build_r2ts_for_cmd() for iscsit_transport->iscsit_get_dataout() - Convert existing usage of iscsit_build_r2ts_for_cmd() to ->iscsit_get_dataout() - Drop RDMAExtentions=Yes specific check in iscsit_build_r2ts_for_cmd() - Fix RDMAExtentions -> RDMAExtensions typo (andy) - Pass correct dump_payload value into iscsit_get_immediate_data() for iscsit_handle_scsi_cmd() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Add per transport iscsi_cmd alloc/freeNicholas Bellinger5-5/+26
This patch converts struct iscsi_cmd memory allocation + free to use ->iscsit_alloc_cmd() iscsit_transport API caller, and export iscsit_allocate_cmd() symbols Also add iscsi_cmd->release_cmd() to be used seperately from iscsit_transport for connection/session shutdown. v2 changes: - Remove unnecessary checks in iscsit_alloc_cmd (asias) - Drop iscsit_transport->iscsit_free_cmd() usage - Drop iscsit_transport->iscsit_unmap_cmd() usage - Add iscsi_cmd->release_cmd() - Convert lio_release_cmd() to use iscsi_cmd->release_cmd() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Add iser-target parameter keys + setup during loginNicholas Bellinger4-17/+161
This patch adds RDMAExtensions, InitiatorRecvDataSegmentLength and TargetRecvDataSegmentLength parameters keys necessary for iser-target login to occur. This includes setting the necessary parameters during login path code within iscsi_login_zero_tsih_s2(), and currently PAGE_SIZE aligning the target's advertised MRDSL for immediate data and unsolicited data-out incoming payloads. v3 changes: - Add iscsi_post_login_start_timers FIXME for ISER v2 changes: - Fix RDMAExtentions -> RDMAExtensions typo (andy) - Drop unnecessary '== true' conditional checks for type bool Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Initial traditional TCP conversion to iscsit_transportNicholas Bellinger9-315/+380
This patch performs the initial conversion of existing traditional iscsi to use iscsit_transport API callers. This includes: - iscsi-np cleanups for iscsit_transport_type - Add iscsi-np transport calls w/ ->iscsit_setup_up() and ->iscsit_free_np() - Convert login thread process context to use ->iscsit_accept_np() for connections with pre-allocated struct iscsi_conn - Convert existing socket accept code to iscsit_accept_np() - Convert login RX/TX callers to use ->iscsit_get_login_rx() and ->iscsit_put_login_tx() to exchange request/response PDUs - Convert existing socket login RX/TX calls into iscsit_get_login_rx() and iscsit_put_login_tx() - Change iscsit_close_connection() to invoke ->iscsit_free_conn() + iscsit_put_transport() calls. - Add iscsit_register_transport() + iscsit_unregister_transport() calls to module init/exit v4 changes: - Add missing iscsit_put_transport() call in iscsi_target_setup_login_socket() failure case v2 changes: - Update module init/exit to use register_transport() + unregister_transport() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Add iscsit_transport API templateNicholas Bellinger2-1/+57
Add basic struct iscsit_transport API template to allow iscsi-target for running with external transport modules using existing iscsi_target_core.h code. For all external modules, this calls try_module_get() and module_put() to obtain + release an external iscsit_transport module reference count. Also include the iscsi-target symbols necessary in iscsi_transport.h to allow external transport modules to function. v3 changes: - Add iscsit_build_reject export for ISTATE_SEND_REJECT usage v2 changes: - Drop unnecessary export of iscsit_get_transport + iscsit_put_transport (roland) - Add ->iscsit_queue_data_in() to remove extra context switch on RDMA_WRITE - Add ->iscsit_queue_status() to remove extra context switch on IB_SEND status - Add ->iscsit_get_dataout() to remove extra context switch on RDMA_READ - Drop ->iscsit_free_cmd() - Drop ->iscsit_unmap_cmd() - Rename iscsit_create_transport() -> iscsit_register_transport() (andy) - Rename iscsit_destroy_transport() -> iscsit_unregister_transport() (andy) Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-22 18:23:23 +0300