| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit f8c35d61ba01afa76846905c67862cdace7f66b0 ]
The SoundWire peripheral enumeration is entirely based on interrupts,
more specifically sticky bits tracking state changes.
This patch adds a defensive programming check on the actual status
reported in PING frames. If for some reason an interrupt was lost or
delayed, the delayed work would detect a peripheral change of status
after the bus starts.
The 100ms defined for the delay is not completely arbitrary, if a
Peripheral didn't join the bus within that delay then probably the
hardware link is broken, and conversely if the detection didn't happen
because of software issues the 100ms is still acceptable in terms of
user experience.
The overhead of the one-shot workqueue is minimal, and the mutual
exclusion ensures that the interrupt and delayed work cannot update
the status concurrently.
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240805114921.88007-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6543ac13c623f906200dfd3f1c407d8d333b6995 ]
The existing SoundWire support misses a clear Controller/Manager
hiearchical definition to deal with all variants across SOC vendors.
a) Intel platforms have one controller with 4 or more Managers.
b) AMD platforms have two controllers with one Manager each, but due
to BIOS issues use two different link_id values within the scope of a
single controller.
c) QCOM platforms have one or more controller with one Manager each.
This patch adds a 'controller_id' which can be set by higher
levels. If assigned to -1, the controller_id will be set to the
system-unique IDA-assigned bus->id.
The main change is that the bus->id is no longer used for any device
name, which makes the definition completely predictable and not
dependent on any enumeration order. The bus->id is only used to insert
the Managers in the stream rt context.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/stable/20231017160933.12624-2-pierre-louis.bossart%40linux.intel.com
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231017160933.12624-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 8a8a9ac8a497 ("soundwire: fix initializing sysfs for same devices on different buses")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
The IDA-based allocation is useful to simplify debug, but it was also
introduced as a prerequisite to deal with the Intel Lunar Lake
hardware programming sequences: the wake-ups have to be handled with a
system-unique SDI address at the HDaudio controller level.
At the time, the restriction introduced by the IDA to 8 devices total
seemed perfectly fine, but recently hardware vendors created
configurations with more than 8 devices.
Add a new allocation strategy to allow for more than 8 devices using
information on the type of devices, and only use the IDA-based
allocation for devices capable of generating a wake.
In theory the information on wake capabilities should come from
firmware, but none of the existing ACPI tables provide it. The drivers
set the 'wake_capable' property, but this cannot be used reliably: if
the driver probe happens *after* the enumeration, then that property
is not initialized yet. Trying to modify the device_number on-the-fly
proved to be an impossible task generating race conditions left and
right.
The only reliable work-around to control the enumeration is to add a
quirk table. It's ugly but until platform firmware improves, hopefully as a
result of MIPI/SDCA stardization, we can expect that quirk table to
grow for each new headset or microphone codec.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731091333.3593132-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Rather than add logic in the core for vendor-specific usages, add
callbacks for vendor-specific device_number allocation and release.
This patch only moves the existing IDA-based allocator used only by
Intel to the intel_auxdevice.c file and does not change the
functionality. Follow-up patches will extend the behavior by modifying
the Intel callbacks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731091333.3593132-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The parameters are only the bus and the device number, manager ops may
need additional details on the type of peripheral connected, such as
whether it is wake-capable or not.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731091333.3593132-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The SoundWire bus is handled with a dedicated device, which is placed
between the Intel auxiliary device and peripheral devices, e.g.
soundwire_intel.link.0/sdw-master-0/sdw:0:025d:0711:01
The functionality of this 'sdw-master' device is limited, specifically
for pm_runtime the ASoC framework will not rely on
pm_runtime_get_sync() since it does not register any components. It
will only change status thanks to the parent-child relationship which
guarantees that the 'sdw-master' device will be pm_runtime resumed
before any peripheral device.
However on startup and system resume it's possible that only the
auxiliary device is pm_runtime active, and the peripheral will only
become active during its io_init routine, leading to another
occurrence of the error reported by the pm_runtime framework:
rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active
This patch suggests aligning the sdw-master device status to that of
the auxiliary device. The difference between the two is completely
notional and their pm_status shouldn't be different during the startup
and system resume steps.
This problem was exposed by recent changes in the timing of the bus
reset, but was present in this driver since we introduced pm_runtime
support.
Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803065220.3823269-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
As soon as the bus starts, physical peripheral devices may report as
ATTACHED and set their status with pm_runtime_set_active() in their
update_status()/io_init().
This is problematic with the existing code, since the parent
pm_runtime status is changed to "active" after starting the bus. This
creates a time window where the pm_runtime framework can report an
issue, e.g.
"rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"
This patch enables runtime_pm earlier to make sure the auxiliary
device is pm_runtime active after powering-up, but before starting the
bus.
This problem was exposed by recent changes in the timing of the bus
reset, but was present in this driver since we introduced pm_runtime
support.
Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803065220.3823269-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add the abstraction needed to only program the LSDIID registers for
the HDaudio extended links. It's perfectly fine to program this
register multiple times in case devices lose sync and reattach.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-21-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Select relevant ip-offset depending on hardware version. This offset
is used to access MCP_ or IP_MCP_ registers with a fixed offset.
For existing platforms, the offset is exactly zero. Starting with
LunarLake, the offset is 0x4000.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In the case where multiple peripherals are attached on the same link,
it's possible that they are in different pm_runtime states.
The device_for_each_child() loop to resume all devices before a system
suspend would not work if one peripheral was active and others
suspended. pm_runtime_resume() returns 1 in the former case, which is
taken as a error. As a result, a pm_runtime suspended device might be
skipped if the first device was active.
This patch changes the behavior of the helper function to only return
zero or a negative error. A Fixes tag is not provided since there are
no existing configurations on Intel platforms with different types of
devices on the same link. Amplifiers may be used on the same link, but
they are used by the same dailink so their pm_runtime state is always
matching. This assumption may not be true in the future, so we should
improve the behavior and align with AMD.
Reported-by: Mukunda,Vijendar <vijendar.mukunda@amd.com>
Link: https://lore.kernel.org/lkml/4cbbff8a-c596-e9cc-a6cf-6f8b66607505@amd.com/
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230323025228.1537107-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
A previous patch removed unnecessary zeroing of the page registers
after a paged transaction, so now the reset_page_addr callback is
unused and can be removed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230123164949.245898-3-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The auxdevice layer is completely generic, it should be split from
intel.c which is only geared to the 'cnl' hw_ops now.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111013135.38289-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
