summaryrefslogtreecommitdiff
path: root/drivers/soc
AgeCommit message (Collapse)AuthorFilesLines
12 dayssoc: qcom: aoss: compare against normalized cooling stateAlok Tiwari1-1/+1
[ Upstream commit cd3c4670db3ffe997be9548c7a9db3952563cf14 ] qmp_cdev_set_cur_state() normalizes the requested state to a boolean (cdev_state = !!state). The existing early-return check compares qmp_cdev->state == state, which can be wrong if state is non-boolean (any non-zero value). Compare qmp_cdev->state against cdev_state instead, so the check matches the effective state and avoids redundant updates. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Fixes: 05589b30b21a ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.") Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260329195333.1478090-1-alok.a.tiwari@oracle.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 dayssoc: qcom: llcc: fix v1 SB syndrome register offsetAlok Tiwari1-1/+1
[ Upstream commit 24e7625df5ce065393249b78930781be593bc381 ] The llcc_v1_edac_reg_offset table uses 0x2304c for trp_ecc_sb_err_syn0, which is inconsistent with the surrounding TRP ECC registers (0x2034x) and with llcc_v2_1_edac_reg_offset, where trp_ecc_sb_err_syn0 is 0x2034c adjacent to trp_ecc_error_status0/1 at 0x20344/0x20348. Use 0x2034c for llcc v1 so the SB syndrome register follows the expected +0x4 progression from trp_ecc_error_status1. This fixes EDAC reading the wrong register for SB syndrome reporting. Fixes: c13d7d261e36 ("soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260330095118.2657362-1-alok.a.tiwari@oracle.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 dayssoc/tegra: pmc: Add kerneldoc for wake-up variablesJon Hunter1-0/+2
[ Upstream commit e6ad1988e56834d641ba4aa0d58970723c1c9c9b ] Commit e6d96073af68 ("soc/tegra: pmc: Fix unsafe generic_handle_irq() call") added the variables 'wake_work' and 'wake_status' to the 'tegra_pmc' structure but did not add the associated kerneldoc for these new variables. Add the kerneldoc for these variables. Fixes: e6d96073af68 ("soc/tegra: pmc: Fix unsafe generic_handle_irq() call") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 dayssoc/tegra: pmc: Correct function names in kerneldocJon Hunter1-2/+2
[ Upstream commit ec0e4da5d679f9da1cc198927951f70fdf28f001 ] Commit 70f752ebb08c ("soc/tegra: pmc: Add PMC contextual functions") added the functions devm_tegra_pmc_get() and tegra_pmc_io_pad_power_enable(), but the names of the functions in the associated kerneldoc is incorrect. Update the kerneldoc for these functions to correct their names. Fixes: 70f752ebb08c ("soc/tegra: pmc: Add PMC contextual functions") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 dayssoc/tegra: pmc: Add kerneldoc for reboot notifierJon Hunter1-0/+1
[ Upstream commit 21669619e4c17a5f097e0415bc64b1d400c54fcb ] Commit 48b7f802fb78 ("soc/tegra: pmc: Embed reboot notifier in PMC context") added the reboot_notifier structure to the PMC SoC structure but did not update the kerneldoc accordingly. Add this missing kerneldoc description to fix this. Fixes: 48b7f802fb78 ("soc/tegra: pmc: Embed reboot notifier in PMC context") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 dayssoc/tegra: cbb: Fix cross-fabric target timeout lookupSumit Gupta1-1/+26
[ Upstream commit a5f51b04cbb3ae0f9cb2c4488952b775ebb0ccbf ] When a fabric receives an error interrupt, the error may have occurred on a different fabric. The target timeout lookup was using the wrong base address (cbb->regs) with offsets from a different fabric's target map, causing a kernel page fault. Unable to handle kernel paging request at virtual address ffff80000954cc00 pc : tegra234_cbb_get_tmo_slv+0xc/0x28 Call trace: tegra234_cbb_get_tmo_slv+0xc/0x28 print_err_notifier+0x6c0/0x7d0 tegra234_cbb_isr+0xe4/0x1b4 Add tegra234_cbb_get_fabric() to look up the correct fabric device using fab_id, and use its base address for accessing target timeout registers. Fixes: 25de5c8fe0801 ("soc/tegra: cbb: Improve handling for per SoC fabric data") Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 dayssoc/tegra: cbb: Fix incorrect ARRAY_SIZE in fabric lookup tablesSumit Gupta1-2/+2
[ Upstream commit 499f7e5ebbdd9ff0c4d532b1c432f8a61ff585b3 ] Fix incorrect ARRAY_SIZE usage in fabric lookup tables which could cause out-of-bounds access during target timeout lookup. Fixes: 25de5c8fe0801 ("soc/tegra: cbb: Improve handling for per SoC fabric data") Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 dayssoc/tegra: cbb: Set ERD on resume for err interruptSumit Gupta1-0/+4
[ Upstream commit b6ff71c5d1d4ad858ddf6f39394d169c96689596 ] Set the Error Response Disable (ERD) bit to mask SError responses and use interrupt-based error reporting. When the ERD bit is set, inband error responses to the initiator via SError are suppressed, and fabric errors are reported via an interrupt instead. The register is set during boot but the info is lost during system suspend and needs to be set again on resume. Fixes: fc2f151d2314 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0") Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 dayssoc: qcom: ocmem: return -EPROBE_DEFER is ocmem is not availableDmitry Baryshkov1-4/+3
[ Upstream commit 91b59009c7d48b58dbc50fecb27f2ad20749a05a ] If OCMEM is declared in DT, it is expected that it is present and handled by the driver. The GPU driver will ignore -ENODEV error, which typically means that OCMEM isn't defined in DT. Let ocmem return -EPROBE_DEFER if it supposed to be used, but it is not probed (yet). Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260323-ocmem-v1-3-ad9bcae44763@oss.qualcomm.com [bjorn: s/ERR_PTR(dev_err_probe)/dev_err_ptr_probe/ Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 dayssoc: qcom: ocmem: register reasons for probe deferralsDmitry Baryshkov1-4/+4
[ Upstream commit 9dfd69cd89cd6afa4723be9098979abeef3bb8c6 ] Instead of printing messages to the dmesg, let the message be recorded as a reason for the OCMEM client deferral. Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260323-ocmem-v1-2-ad9bcae44763@oss.qualcomm.com [bjorn: s/ERR_PTR(dev_err_probe)/dev_err_ptr_probe/ Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 dayssoc: qcom: ocmem: make the core clock optionalDmitry Baryshkov1-1/+1
[ Upstream commit e8a61c51417c679d1a599fb36695e9d3b8d95514 ] OCMEM's core clock (aka RPM bus 2 clock) is being handled internally by the interconnect driver. Corresponding clock has been dropped from the SMD RPM clock driver. The users of the ocmem will vote on the ocmemnoc interconnect paths, making sure that ocmem is on. Make the clock optional, keeping it for compatibility with older DT. Fixes: d6edc31f3a68 ("clk: qcom: smd-rpm: Separate out interconnect bus clocks") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260323-ocmem-v1-1-ad9bcae44763@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 dayssoc: qcom: ubwc: disable bank swizzling for Glymur platformDmitry Baryshkov1-2/+1
[ Upstream commit e031e7ceac4ee04973bd77362c363734e79dd08c ] Due to the way the DDR controller is organized on Glymur, hardware engineers strongly recommended disabling UBWC bank swizzling on Glymur. Follow that recommendation. Fixes: 9b21c3bd2480 ("soc: qcom: ubwc: Add configuration Glymur platform") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Acked-by: Rob Clark <rob.clark@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Link: https://lore.kernel.org/r/20260228-fix-glymur-ubwc-v2-1-70819bd6a6b4@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-04-01Merge tag 'qcom-drivers-fixes-for-7.0' of ↵Krzysztof Kozlowski3-13/+30
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm driver fixes for v7.0 Fix the length of the PD restart reason string in pd-mapper to avoid QMI decoding errors, resulting in the notification being dropped. Fix the newly introduce handling of TBT/USB4 notifications in pmic_glink altmode driver, as it broke the handling of non-TBT/USB4 DisplayPort unplug events. * tag 'qcom-drivers-fixes-for-7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: pmic_glink_altmode: Fix TBT->SAFE->!TBT transition soc: qcom: pmic_glink_altmode: Fix SVID=DP && unconnected edge case soc: qcom: pd-mapper: Fix element length in servreg_loc_pfr_req_ei Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-04-01Merge tag 'riscv-soc-fixes-for-v7.0-rc6' of ↵Krzysztof Kozlowski2-4/+8
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes RISC-V soc fixes for v7.0-rc6 Microchip: More resource leak fixes for unlikely scenarios, and a change to the auto-update "firmware" driver to prevent it probing on systems with engineering silicon where it cannot be used. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-soc-fixes-for-v7.0-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/conor/linux: firmware: microchip: fail auto-update probe if no flash found soc: microchip: mpfs-mss-top-sysreg: Fix resource leak on driver unbind soc: microchip: mpfs-control-scb: Fix resource leak on driver unbind Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-04-01Merge tag 'aspeed-7.0-fixes-0' of ↵Krzysztof Kozlowski1-1/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux into arm/fixes aspeed: first batch of fixes for v7.0 * tag 'aspeed-7.0-fixes-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux: soc: aspeed: socinfo: Mask table entries for accurate SoC ID matching Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-03-19soc: microchip: mpfs-mss-top-sysreg: Fix resource leak on driver unbindFelix Gu1-2/+4
Use devm_mfd_add_devices() instead of mfd_add_devices() to ensure child devices are properly removed when the driver unbinds. Fixes: 4aac11c9a6e7 ("soc: microchip: add mfd drivers for two syscon regions on PolarFire SoC") Signed-off-by: Felix Gu <ustc.gu@gmail.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2026-03-19soc: microchip: mpfs-control-scb: Fix resource leak on driver unbindFelix Gu1-2/+4
Use devm_mfd_add_devices() instead of mfd_add_devices() to ensure child devices are properly removed when the driver unbinds. Fixes: 4aac11c9a6e7 ("soc: microchip: add mfd drivers for two syscon regions on PolarFire SoC") Signed-off-by: Felix Gu <ustc.gu@gmail.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2026-03-19soc: qcom: pmic_glink_altmode: Fix TBT->SAFE->!TBT transitionKonrad Dybcio1-5/+18
Similar to the case of commit d48708500610 ("soc: qcom: pmic_glink_altmode: Fix SVID=DP && unconnected edge case"), leaving the TBT altmode makes pmic_glink_altmode report a SVID=TBT && mux_ctrl=0 message. Said commit reordered the check such that the SVID is processed before checking for NO_CONN. Rework this to take into account valid values of mux_ctrl first and hopefully solve this for good.. Fixes: d48708500610 ("soc: qcom: pmic_glink_altmode: Fix SVID=DP && unconnected edge case") Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260317-topic-tbt_pg_fixup-v1-1-325b8647bc82@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-17Merge tag 'v7.0-rockchip-drvfixes1' of ↵Krzysztof Kozlowski1-0/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Fixing a missing of_node_put() call. * tag 'v7.0-rockchip-drvfixes1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: soc: rockchip: grf: Add missing of_node_put() when returning Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-03-16soc: qcom: pmic_glink_altmode: Fix SVID=DP && unconnected edge caseKonrad Dybcio1-7/+11
The commit referenced in Fixes started evaluating the value of alt_port->mux_ctrl before checking the active SVID. This led to drm_aux_hpd_bridge_notify() no longer being called for the 'DP unplug' case. Perhaps somewhat interestingly, the firmware sends a notification with SVID=DP, mux_ctrl=MUX_CTRL_STATE_NO_CONN and pin_assignment=0 on unplug. 'pin_assignment' was previously interpreted as a bitfield excerpt from the second byte of the DP pg_altmode payload (and stored as an u8). That value is used in pmic_glink_altmode_sc8280xp_notify(), decremented by 1 (DPAM_HPD_A). Previously, this would result in an u8 underflow that would rollover to 0xff (which prior to the Fixes patch would have caused a pmic_glink_altmode_safe() and 'disconnected' bridge notification). That check was removed, without a replacement. Resolve this issue by making sure the SID=DP && mux_ctrl=NO_CONN combo once again results in a HPD bridge notification. Fixes: 0539c5a6fdef ("soc: qcom: pmic_glink_altmode: Consume TBT3/USB4 mode notifications") Reported-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Tested-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260306-topic-pgaltmode_fixup-v1-1-ec154b2d8e89@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-16soc: qcom: pd-mapper: Fix element length in servreg_loc_pfr_req_eiMukesh Ojha2-2/+2
It looks element length declared in servreg_loc_pfr_req_ei for reason not matching servreg_loc_pfr_req's reason field due which we could observe decoding error on PD crash. qmi_decode_string_elem: String len 81 >= Max Len 65 Fix this by matching with servreg_loc_pfr_req's reason field. Fixes: 1ebcde047c54 ("soc: qcom: add pd-mapper implementation") Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Tested-by: Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20260129152320.3658053-2-mukesh.ojha@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-04Merge tag 'soc_fsl-7.0-2' of ↵Arnd Bergmann2-4/+24
https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux into arm/fixes FSL SOC Fixes for 7.0 - Fix a race condition in Freescale Queue and Buffer Manager. - Fix a trivial error verification in CPM1 * tag 'soc_fsl-7.0-2' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux: soc: fsl: cpm1: qmc: Fix error check for devm_ioremap_resource() in qmc_qe_init_resources() soc: fsl: qbman: fix race condition in qman_destroy_fq Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-03-04Merge tag 'riscv-soc-fixes-for-v7.0-rc1' of ↵Arnd Bergmann1-4/+9
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes RISC-V soc fixes for v7.0-rc1 drivers: Fix leaks in probe/init function teardown code in three drivers. microchip: Fix a warning introduced by a recent binding change, that made resets required on Polarfire SoC's CAN IP. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-soc-fixes-for-v7.0-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: cache: ax45mp: Fix device node reference leak in ax45mp_cache_init() cache: starfive: fix device node leak in starlink_cache_init() riscv: dts: microchip: add can resets to mpfs soc: microchip: mpfs: Fix memory leak in mpfs_sys_controller_probe() Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-02-23soc: fsl: cpm1: qmc: Fix error check for devm_ioremap_resource() in ↵Chen Ni1-2/+2
qmc_qe_init_resources() Fix wrong variable used for error checking after devm_ioremap_resource() call. The function checks qmc->scc_pram instead of qmc->dpram, which could lead to incorrect error handling. Fixes: eb680d563089 ("soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Acked-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20260209015904.871269-1-nichen@iscas.ac.cn Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
2026-02-23soc: fsl: qbman: fix race condition in qman_destroy_fqRichard Genoud1-2/+22
When QMAN_FQ_FLAG_DYNAMIC_FQID is set, there's a race condition between fq_table[fq->idx] state and freeing/allocating from the pool and WARN_ON(fq_table[fq->idx]) in qman_create_fq() gets triggered. Indeed, we can have: Thread A Thread B qman_destroy_fq() qman_create_fq() qman_release_fqid() qman_shutdown_fq() gen_pool_free() -- At this point, the fqid is available again -- qman_alloc_fqid() -- so, we can get the just-freed fqid in thread B -- fq->fqid = fqid; fq->idx = fqid * 2; WARN_ON(fq_table[fq->idx]); fq_table[fq->idx] = fq; fq_table[fq->idx] = NULL; And adding some logs between qman_release_fqid() and fq_table[fq->idx] = NULL makes the WARN_ON() trigger a lot more. To prevent that, ensure that fq_table[fq->idx] is set to NULL before gen_pool_free() is called by using smp_wmb(). Fixes: c535e923bb97 ("soc/fsl: Introduce DPAA 1.x QMan device driver") Signed-off-by: Richard Genoud <richard.genoud@bootlin.com> Tested-by: CHAMPSEIX Thomas <thomas.champseix@alstomgroup.com> Link: https://lore.kernel.org/r/20251223072549.397625-1-richard.genoud@bootlin.com Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
2026-02-23soc: aspeed: socinfo: Mask table entries for accurate SoC ID matchingPotin Lai1-1/+1
The siliconid_to_name() function currently masks the input silicon ID with 0xff00ffff, but compares it against unmasked table entries. This causes matching to fail if the table entries contain non-zero values in the bits covered by the mask (bits 16-23). Update the logic to apply the 0xff00ffff mask to the table entries during comparison. This ensures that only the relevant model and revision bits are considered, providing a consistent match across different manufacturing batches. [arj: Add Fixes: tag, fix 'soninfo' typo, clarify function reference] Fixes: e0218dca5787 ("soc: aspeed: Add soc info driver") Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20260122-soc_aspeed_name_fix-v1-1-33a847f2581c@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2026-02-23soc: rockchip: grf: Add missing of_node_put() when returningShawn Lin1-0/+1
Fix the smatch checking: drivers/soc/rockchip/grf.c:249 rockchip_grf_init() warn: inconsistent refcounting 'np->kobj.kref.refcount.refs.counter': Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: 75fb63ae0312 ("soc: rockchip: grf: Support multiple grf to be handled") Closes: https://lore.kernel.org/all/aYXvgTcUJWQL2can@stanley.mountain/ Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Link: https://patch.msgid.link/1770814957-17762-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2026-02-22Convert more 'alloc_obj' cases to default GFP_KERNEL argumentsLinus Torvalds2-4/+2
This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-22Convert 'alloc_obj' family to use the new default GFP_KERNEL argumentLinus Torvalds38-58/+58
This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21treewide: Replace kmalloc with kmalloc_obj for non-scalar typesKees Cook41-67/+67
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-17Merge tag 'phy-for-7.0' of ↵Linus Torvalds3-0/+87
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "Core: - Add suuport for "rx-polarity" and "tx-polarity" device tree properties and phy common properties to manage this New Support: - Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy, USB UNI PHY and SMB2370 eUSB2 repeater. SC8280xp QMP UFS PHY, Kaanapali PCIe phy and QMP PHY, QCS615 QMP USB3+DP PHY and driver support for that. - SpacemiT PCIe/combo PHY and K1 USB2 PHY driver. - HDMI 2.1 FRL configuration support and driver enabling for rockchip samsung-hdptx driver - TI TCAN1046 phy - Renesas RZ/V2H(P) and RZ/V2N usb3 - Mediatek MT8188 hdmi-phy - Google Tensor SoC USB PHY driver - Apple Type-C PHY Updates: - Subsystem conversion for clock round_rate() to determine_rate() - TI USB3 DT schema conversion - Samsung ExynosAutov920 usb3, combo hsphy and ssphy support" * tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (143 commits) phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate() dt-bindings: phy: ti,control-phy-otghs: convert to DT schema dt-bindings: phy: ti,phy-usb3: convert to DT schema phy: tegra: xusb: Remove unused powered_on variable phy: renesas: rcar-gen3-usb2: add regulator dependency phy: GOOGLE_USB: add TYPEC dependency phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY phy: renesas: rcar-gen3-usb2: Use mux-state for phyrst management phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable() phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC dt-bindings: phy: renesas,usb2-phy: Document mux-states property dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config phy: rockchip: samsung-hdptx: Drop hw_rate driver data phy: rockchip: samsung-hdptx: Compute clk rate from PLL config phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists ...
2026-02-11Merge tag 'soc-drivers-7.0' of ↵Linus Torvalds30-361/+1724
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "There are are a number of to firmware drivers, in particular the TEE subsystem: - a bus callback for TEE firmware that device drivers can register to - sysfs support for tee firmware information - minor updates to platform specific TEE drivers for AMD, NXP, Qualcomm and the generic optee driver - ARM SCMI firmware refactoring to improve the protocol discover among other fixes and cleanups - ARM FF-A firmware interoperability improvements The reset controller and memory controller subsystems gain support for additional hardware platforms from Mediatek, Renesas, NXP, Canaan and SpacemiT. Most of the other changes are for random drivers/soc code. Among a number of cleanups and newly added hardware support, including: - Mediatek MT8196 DVFS power management and mailbox support - Qualcomm SCM firmware and MDT loader refactoring, as part of the new Glymur platform support. - NXP i.MX9 System Manager firmware support for accessing the syslog - Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD SoCs" * tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits) bus: fsl-mc: fix an error handling in fsl_mc_device_add() reset: spacemit: Add SpacemiT K3 reset driver reset: spacemit: Extract common K1 reset code reset: Create subdirectory for SpacemiT drivers dt-bindings: soc: spacemit: Add K3 reset support and IDs reset: canaan: k230: drop OF dependency and enable by default reset: rzg2l-usbphy-ctrl: Add suspend/resume support reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits() reset: gpio: check the return value of gpiod_set_value_cansleep() reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV reset: imx8mp-audiomix: Extend the driver usage reset: imx8mp-audiomix: Switch to using regmap API reset: imx8mp-audiomix: Drop unneeded macros soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create() mailbox: mtk-cmdq: Add driver data to support for MT8196 mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction ...
2026-02-11Merge tag 'irq-drivers-2026-02-09' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq chip driver updates from Thomas Gleixner: - Add support for the Renesas RZ/V2N SoC - Add a new driver for the Renesas RZ/[TN]2H SoCs - Preserve the register state of the RISCV APLIC interrupt controller accross suspend/resume - Reinitialize the RISCV IMSIC registers after suspend/resume - Make the various Loongson interrupt chip drivers 32/64-bit aware - Handle the number of hardware interrupts in the SIFIVE PLIC driver correctly The hardware interrupt 0 is reserved which resulted in inconsistent accounting. That went unnoticed as the off by one is only noticable when the number of device interrupts is a multiple of 32 - The usual device tree updates, cleanups and improvements all over the place * tag 'irq-drivers-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) irqchip/gic-v5: Fix spelling mistake "ouside" -> "outside" dt-bindings: interrupt-controller: sifive,plic: Clarify the riscv,ndev meaning in PLIC irqchip/sifive-plic: Handle number of hardware interrupts correctly irqchip/aspeed-scu-ic: Remove unused variable mask irqchip/ti-sci-intr: Allow parsing interrupt-types per-line dt-bindings: interrupt-controller: ti,sci-intr: Per-line interrupt-types irqchip/renesas-rzv2h: Add suspend/resume support irqchip/aslint-sswi: Fix error check of of_io_request_and_map() result irqchip: Allow LoongArch irqchip drivers on both 32BIT/64BIT irqchip/loongson-pch-pic: Adjust irqchip driver for 32BIT/64BIT irqchip/loongson-pch-msi: Adjust irqchip driver for 32BIT/64BIT irqchip/loongson-htvec: Adjust irqchip driver for 32BIT/64BIT irqchip/loongson-eiointc: Adjust irqchip driver for 32BIT/64BIT irqchip/loongson-liointc: Adjust irqchip driver for 32BIT/64BIT irqchip/loongarch-avec: Adjust irqchip driver for 32BIT/64BIT irqchip/riscv-aplic: Preserve APLIC states across suspend/resume irqchip/riscv-imsic: Add a CPU pm notifier to restore the IMSIC on exit arm64: dts: renesas: r9a09g087: Add ICU support arm64: dts: renesas: r9a09g077: Add ICU support irqchip: Add RZ/{T2H,N2H} Interrupt Controller (ICU) driver ...
2026-02-04Merge tag 'soc_fsl-6.20-1' of ↵Arnd Bergmann3-12/+144
https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux into soc/drivers FSL SOC Changes for 6.20 Freescale Management Complex: - Convert fsl-mc bus to bus callbacks - Fix a use-after-free - Drop redundant error messages - Fix ressources release on some error path Freescale QUICC Engine: - Add an interrupt controller for IO Ports - Use scoped for-each OF child loop * tag 'soc_fsl-6.20-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux: bus: fsl-mc: fix an error handling in fsl_mc_device_add() soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove dt-bindings: soc: fsl: qe: Add an interrupt controller for QUICC Engine Ports soc: fsl: qe: Add an interrupt controller for QUICC Engine Ports soc: fsl: qe: Simplify with scoped for each OF child loop bus: fsl-mc: fix use-after-free in driver_override_show() bus: fsl-mc: Convert to bus callbacks bus: fsl-mc: Drop error message in probe function Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-01-29Merge tag 'v6.20-rockchip-drivers1' of ↵Arnd Bergmann1-29/+28
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/drivers Two fixes for the default-settings code for the General-Register-Files, which sets system defaults for some settings like disabling the automatic jtag/sdmmc switching. One is a corrected register-offset and the other makes the code actually look for all matched GRF instances, which it didn't do before. * tag 'v6.20-rockchip-drivers1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: soc: rockchip: grf: Support multiple grf to be handled soc: rockchip: grf: Fix wrong RK3576_IOCGRF_MISC_CON definition Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-01-29Merge tag 'mvebu-arm-6.20-1' of ↵Arnd Bergmann1-6/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/drivers mvebu arm for 6.20 (part 1) Simplify Dove PMU OF child node iteration with scoped loops * tag 'mvebu-arm-6.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: soc: dove: pmu: Simplify with scoped for each OF child loop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-01-29Merge tag 'amlogic-drivers-for-v6.20' of ↵Arnd Bergmann1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers Amlogic Drivers for v6.20: - add new SoC id for S905Y4 * tag 'amlogic-drivers-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: soc: amlogic: meson-gx-socinfo: add new SoC id for S905Y4 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-01-29Merge tag 'mtk-soc-for-v6.20' of ↵Arnd Bergmann4-39/+408
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers MediaTek soc driver updates This adds: - A socinfo entry for the MT8371 Genio 520 SoC - Support for the Dynamic Voltage and Frequency Scaling Resource Controller (DVFSRC) version 4, found in the new MediaTek Kompanio Ultra (MT8196) SoC - Initial support for the CMDQ mailbox found in the MT8196. - A memory leak fix in the MediaTek SVS driver's debug ops. * tag 'mtk-soc-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create() mailbox: mtk-cmdq: Add driver data to support for MT8196 mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction mailbox: mtk-cmdq: Add GCE hardware virtualization configuration mailbox: mtk-cmdq: Add cmdq private data to cmdq_pkt for generating instruction soc: mediatek: mtk-dvfsrc: Rework bandwidth calculations soc: mediatek: mtk-dvfsrc: Get and Enable DVFSRC clock soc: mediatek: mtk-dvfsrc: Add support for DVFSRCv4 and MT8196 soc: mediatek: mtk-dvfsrc: Write bandwidth to EMI DDR if present soc: mediatek: mtk-dvfsrc: Add a new callback for calc_dram_bw soc: mediatek: mtk-dvfsrc: Add and propagate DVFSRC bandwidth type soc: mediatek: mtk-dvfsrc: Change error check for DVFSRCv4 START cmd dt-bindings: soc: mediatek: dvfsrc: Document clock soc: mediatek: mtk-socinfo: Add entry for MT8371AV/AZA Genio 520 soc: mediatek: svs: Fix memory leak in svs_enable_debug_write() Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-01-29Merge tag 'apple-soc-drivers-6.20' of ↵Arnd Bergmann1-0/+16
https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/drivers Apple SoC driver updates for 6.20 - Add a poweroff function to the RTKit library which will be required for the first USB4/Thunderbolt series I hope to submit next cycle. * tag 'apple-soc-drivers-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux: soc: apple: rtkit: Add function to poweroff Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-01-29Merge tag 'qcom-drivers-fixes-for-6.19' of ↵Arnd Bergmann1-2/+3
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm driver fix for v6.19 The changes to the logic in the Qualcomm SMEM driver for separating "failed to probe" from "not yet probed", did not change the qcom_smem_is_available() function, with the result that clients sees SMEM as always available. Clients might then proceed to interact with SMEM in codepaths that aren't suited to cope with -EPROBE_DEFER. * tag 'qcom-drivers-fixes-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: smem: fix qcom_smem_is_available and check if __smem is valid Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-01-28soc: qcom: smem: fix qcom_smem_is_available and check if __smem is validChristian Marangi1-2/+3
Commit 7a94d5f31b54 ("soc: qcom: smem: better track SMEM uninitialized state") changed the usage of __smem and init now as an error pointer instead of NULL. qcom_smem_is_available() wasn't updated to reflect this change and also .qcom_smem_remove doesn't reset it on module exit. Update both entry to reflect new handling of __smem. Fixes: 7a94d5f31b54 ("soc: qcom: smem: better track SMEM uninitialized state") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/aSAnR3ECa04CoPqp@stanley.mountain/ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251122185002.26524-1-ansuelsmth@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-01-21Merge tag 'qcom-drivers-for-6.20' of ↵Arnd Bergmann6-62/+532
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers Qualcomm driver updates for v6.20 Support multiple wait queues in the SCM firmware interface and provide discovery of the wait queue interrupt to deal with the cases where bootloader didn't patch the DeviceTree with the IRQ information. Refactor the MDT loader and the SCM driver's peripheral authentication service interface and introduce support for passing a remoteproc resource table to the firmware. The remoteproc patches that uses this and uses this to configure the IOMMU are included here due to bidirectional dependencies. The end result is remoteproc support on the Glymur platform. Enable QSEECOM and thereby UEFI variable access, on the Surface Pro 11. Make the QMI interface endianness aware, to support ath1Xk on big endian machines. Add the Glymur support in LLCC driver. * tag 'qcom-drivers-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits) soc: qcom: preserve CPU endianness for QMI_DATA_LEN soc: qcom: fix QMI encoding/decoding for basic elements soc: qcom: check QMI basic element error codes soc: qcom: ubwc: add missing include remoteproc: qcom: pas: Enable Secure PAS support with IOMMU managed by Linux remoteproc: pas: Extend parse_fw callback to fetch resources via SMC call firmware: qcom_scm: Add qcom_scm_pas_get_rsc_table() to get resource table firmware: qcom_scm: Add SHM bridge handling for PAS when running without QHEE firmware: qcom_scm: Refactor qcom_scm_pas_init_image() firmware: qcom_scm: Add a prep version of auth_and_reset function soc: qcom: mdtloader: Remove qcom_mdt_pas_init() from exported symbols soc: qcom: mdtloader: Add PAS context aware qcom_mdt_pas_load() function remoteproc: pas: Replace metadata context with PAS context structure firmware: qcom_scm: Introduce PAS context allocator helper function firmware: qcom_scm: Rename peripheral as pas_id firmware: qcom_scm: Remove redundant piece of code dt-bindings: remoteproc: qcom,pas: Add iommus property soc: qcom: cmd-db: Use devm_memremap() to fix memory leak in cmd_db_dev_probe soc: qcom: pmic_glink_altmode: Consume TBT3/USB4 mode notifications dt-bindings: qcom,pdc: document the Milos Power Domain Controller ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-01-21Merge tag 'ti-driver-soc-for-v6.20' of ↵Arnd Bergmann5-38/+18
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers TI SoC driver updates for v6.20 Bug Fixes: - pruss: Fix double free in pruss_clk_mux_setup() - k3-socinfo: Fix regmap leak on probe failure - k3-socinfo: Fix compile testing dependency issue Cleanups: - knav_dma/knav_qmss: Remove redundant ENOMEM printks and simplify error messages - knav_dma/knav: Simplify code with scoped for each OF child loops - ti_sci.h: Fix all kernel-doc warnings * tag 'ti-driver-soc-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: soc: ti: pruss: Fix double free in pruss_clk_mux_setup() soc: ti: k3-socinfo: Fix regmap leak on probe failure soc: ti: k3-socinfo: Fix compile testing soc: ti: knav_dma: Simplify with scoped for each OF child loop soc: ti: knav: Simplify with scoped for each OF child loop soc: ti: knav_dma: Simplify error messages in probe soc: ti: knav_dma: Remove ENOMEM printks soc: ti: knav_qmss: Remove ENOMEM printks firmware: ti_sci.h: fix all kernel-doc warnings Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-01-21Merge tag 'imx-drivers-6.20' of ↵Arnd Bergmann2-31/+21
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers i.MX drivers changes for 6.20: - A few changes from Peng Fan adding dump syslog support for i.MX System Manager firmware driver, cleaning up soc-imx9 driver, fixing error handling for soc-imx8m driver * tag 'imx-drivers-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx8m: Fix error handling for clk_prepare_enable() soc: imx: Spport i.MX9[4,52] soc: imx: Use dev_err_probe() for i.MX9 soc: imx: Use device-managed APIs for i.MX9 firmware: imx: sm-misc: Dump syslog info firmware: arm_scmi: imx: Support getting syslog of MISC protocol Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-01-21Merge tag 'zynqmp-soc-for-6.20' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann1-3/+3
soc/drivers arm64: Xilinx SOC changes for 6.20 - Fix Michal's email in cpuidle driver - s/system_unbound_wq/system_dfl_wq/g in zynqmp_power * tag 'zynqmp-soc-for-6.20' of https://github.com/Xilinx/linux-xlnx: cpuidle: zynq: Switch Michal Simek's email to new one soc/xilinx: replace use of system_unbound_wq with system_dfl_wq Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-01-21Merge tag 'tegra-for-6.20-soc' of ↵Arnd Bergmann1-100/+325
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers soc/tegra: Changes for v6.20-rc1 This series primarily refactors the Tegra PMC driver to eliminate reliance on a global variable, transitioning to passing the tegra_pmc context explicitly across clocks, powergates, sysfs/debugfs interfaces, and power management callbacks. Additionally, it resolves a warning during system resume by deferring an unsafe generic_handle_irq() call to a hard IRQ context using irq_work. * tag 'tegra-for-6.20-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: pmc: Add PMC contextual functions soc/tegra: pmc: Do not rely on global variable soc/tegra: pmc: Use driver-private data soc/tegra: pmc: Use PMC context embedded in powergates soc/tegra: pmc: Pass PMC context as debugfs data soc/tegra: pmc: Pass PMC context via sys-off callback data soc/tegra: pmc: Embed reboot notifier in PMC context soc/tegra: pmc: Store PMC context in clocks soc/tegra: pmc: Pass struct tegra_pmc to tegra_powergate_state() soc/tegra: pmc: Use contextual data instead of global variable soc/tegra: pmc: Fix unsafe generic_handle_irq() call Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-01-21Merge tag 'samsung-drivers-6.20' of ↵Arnd Bergmann1-41/+92
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers Samsung SoC drivers for v6.20 1. Several improvements in Exynos ChipID Socinfo driver and finally adding Google GS101 SoC support. 2. Few cleanups from old code. 3. Documenting Axis Artpec-9 SoC PMU (Power Management Unit). * tag 'samsung-drivers-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: s3c: remove a leftover hwmon-s3c.h header file dt-bindings: soc: samsung: exynos-pmu: Drop unnecessary select schema soc: samsung: exynos-chipid: add google,gs101-otp support soc: samsung: exynos-chipid: downgrade dev_info to dev_dbg for soc info soc: samsung: exynos-chipid: rename method dt-bindings: nvmem: add google,gs101-otp soc: samsung: exynos-chipid: use dev_err_probe where appropiate soc: samsung: exynos-chipid: use devm action to unregister soc device dt-bindings: samsung: exynos-pmu: Add compatible for ARTPEC-9 SoC Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-01-21soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/removeChen Ni1-2/+1
The driver currently sets the handler data and the chained handler in two separate steps. This creates a theoretical race window where an interrupt could fire after the handler is set but before the data is assigned, leading to a NULL pointer dereference. Replace the two calls with irq_set_chained_handler_and_data() to set both the handler and its data atomically under the irq_desc->lock. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Link: https://lore.kernel.org/r/20260119055715.889001-1-nichen@iscas.ac.cn Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
2026-01-19soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addressesJason-JH Lin1-2/+4
Since GCE has been moved to MMINFRA in MT8196, all transactions from MMINFRA to DRAM will have their addresses adjusted by subtracting a mminfra_offset. Therefore, the CMDQ helper driver needs to get the mminfra_offset value of the SoC from cmdq_mbox_priv of cmdq_pkt and then add it to the DRAM address when generating instructions to ensure GCE accesses the correct DRAM address. CMDQ users can then call CMDQ helper APIs as usual. Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2026-01-19soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys IDJason-JH Lin1-0/+54
This patch extends the cmdq_pkt_write API to support SoCs that do not have subsys ID mapping by introducing new register write APIs: - cmdq_pkt_write_pa() and cmdq_pkt_write_subsys() replace cmdq_pkt_write() - cmdq_pkt_write_mask_pa() and cmdq_pkt_write_mask_subsys() replace cmdq_pkt_write_mask() To ensure consistent function pointer interfaces, both cmdq_pkt_write_pa() and cmdq_pkt_write_subsys() provide subsys and pa_base parameters. This unifies how register writes are invoked, regardless of whether subsys ID is supported by the device. All GCEs support writing registers by PA (with mask) without subsys, but this requires extra GCE instructions to convert the PA into a GCE readable format, reducing performance compared to using subsys directly. Therefore, subsys is preferred for register writes when available. API documentation and function pointer declarations in cmdq_client_reg have been updated. The original write APIs will be removed after all CMDQ users transition to the new interfaces. Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-06-04 16:51:48 +0300