summaryrefslogtreecommitdiff
path: root/drivers/soc/fsl
AgeCommit message (Collapse)AuthorFilesLines
2020-01-09soc: fsl: qe: remove set but not used variable 'mm_gc'YueHaibing1-2/+0
drivers/soc/fsl/qe/gpio.c: In function qe_pin_request: drivers/soc/fsl/qe/gpio.c:163:26: warning: variable mm_gc set but not used [-Wunused-but-set-variable] commit 1e714e54b5ca ("powerpc: qe_lib-gpio: use gpiochip data pointer") left behind this unused variable. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: remove PPC32 dependency from CONFIG_QUICC_ENGINERasmus Villemoes1-1/+2
There are also PPC64, ARM and ARM64 based SOCs with a QUICC Engine, and the core QE code as well as net/wan/fsl_ucc_hdlc and tty/serial/ucc_uart has now been modified to not rely on ppcisms. So extend the architectures that can select QUICC_ENGINE, and add the rather modest requirements of OF && HAS_IOMEM. The core code as well as the ucc_uart driver has been tested on an LS1021A (arm), and it has also been tested that the QE code still works on an mpc8309 (ppc). Qiang Zhao has tested that the QE-HDLC code that gets enabled with this works on ARM64. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: remove unused #include of asm/irq.h from ucc.cRasmus Villemoes1-1/+0
When allowing this driver to be built for ARM, the build fails (for CONFIG_SMP=y) since ARM's asm/irq.h header is not self-contained: In file included from drivers/soc/fsl/qe/ucc.c:18:0: >> arch/arm/include/asm/irq.h:34:50: error: unknown type name 'cpumask_t' extern void arch_trigger_cpumask_backtrace(const cpumask_t *mask, But nothing in this file actually uses anything from asm/irq.h - removing this #include generates identical object code, both on PPC32 and on ARM (the latter with a patch added to asm/irq.h to make the build work in the first place). Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: avoid IS_ERR_VALUE in ucc_fast.cRasmus Villemoes1-9/+6
When building this on a 64-bit platform gcc rightly warns that the error checking is broken (-ENOMEM stored in an u32 does not compare greater than (unsigned long)-MAX_ERRNO). Instead, change the ucc_fast_[tr]x_virtual_fifo_base_offset members to s32 and use an ordinary check-for-negative. Also, this avoids treating 0 as "this cannot have been returned from qe_muram_alloc() so don't free it". Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: drop pointless check in qe_sdma_init()Rasmus Villemoes1-3/+0
The sdma member of struct qe_immap is not at offset zero, so even if qe_immr wasn't initialized yet (i.e. NULL), &qe_immr->sdma would not be NULL. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: drop use of IS_ERR_VALUE in qe_sdma_init()Rasmus Villemoes1-3/+3
Now that qe_muram_alloc() returns s32, adapt qe_sdma_init() and avoid another few IS_ERR_VALUE() uses. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: avoid IS_ERR_VALUE in ucc_slow.cRasmus Villemoes1-13/+9
When trying to build this for a 64-bit platform, one gets warnings from using IS_ERR_VALUE on something which is not sizeof(long). Instead, change the various *_offset fields to store a signed integer, and simply check for a negative return from qe_muram_alloc(). Since qe_muram_free() now accepts and ignores a negative argument, we only need to make sure these fields are initialized with -1, and we can just unconditionally call qe_muram_free() in ucc_slow_free(). Note that the error case for us_pram_offset failed to set that field to 0 (which, as noted earlier, is anyway a bogus sentinel value). Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: refactor cpm_muram_alloc_common to prevent BUG on error pathRasmus Villemoes1-9/+7
If the kmalloc() fails, we try to undo the gen_pool allocation we've just done. Unfortunately, start has already been modified to subtract the GENPOOL_OFFSET bias, so we're freeing something that very likely doesn't exist in the gen_pool, meaning we hit the kernel BUG at lib/genalloc.c:399! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM ... [<803fd0e8>] (gen_pool_free) from [<80426bc8>] (cpm_muram_alloc_common+0xb0/0xc8) [<80426bc8>] (cpm_muram_alloc_common) from [<80426c28>] (cpm_muram_alloc+0x48/0x80) [<80426c28>] (cpm_muram_alloc) from [<80428214>] (ucc_slow_init+0x110/0x4f0) [<80428214>] (ucc_slow_init) from [<8044a718>] (qe_uart_request_port+0x3c/0x1d8) (this was tested by just injecting a random failure by adding "|| (get_random_int()&7) == 0" to the "if (!entry)" condition). Refactor the code so we do the kmalloc() first, meaning that's the thing that needs undoing in case gen_pool_alloc_algo() then fails. This allows a later cleanup to move the locking from the callers into the _common function, keeping the kmalloc() out of the critical region and then, hopefully (if all the muram_alloc callers allow) change it to a GFP_KERNEL allocation. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: drop broken lazy call of cpm_muram_init()Rasmus Villemoes1-3/+0
cpm_muram_alloc_common() tries to support a kind of lazy initialization - if the muram_pool has not been created yet, it calls cpm_muram_init(). Now, cpm_muram_alloc_common() is always called under spin_lock_irqsave(&cpm_muram_lock, flags); and cpm_muram_init() does gen_pool_create() (which implies a GFP_KERNEL allocation) and ioremap(), not to mention the fun that ensues from cpm_muram_init() doing spin_lock_init(&cpm_muram_lock); In other words, this has never worked, so nobody can have been relying on it. cpm_muram_init() is called from a subsys_initcall (either from cpm_init() in arch/powerpc/sysdev/cpm_common.c or, via qe_reset(), from qe_init() in drivers/soc/fsl/qe/qe.c). Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: make cpm_muram_free() ignore a negative offsetRasmus Villemoes1-0/+3
This allows one to simplify callers since they can store a negative value as a sentinel to indicate "this was never allocated" (or store the -ENOMEM from an allocation failure) and then call cpm_muram_free() unconditionally. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: make cpm_muram_free() return voidRasmus Villemoes1-2/+1
Nobody uses the return value from cpm_muram_free, and functions that free resources usually return void. One could imagine a use for a "how much have I allocated" a la ksize(), but knowing how much one had access to after the fact is useless. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: change return type of cpm_muram_alloc() to s32Rasmus Villemoes1-13/+16
There are a number of problems with cpm_muram_alloc() and its callers. Most callers assign the return value to some variable and then use IS_ERR_VALUE to check for allocation failure. However, when that variable is not sizeof(long), this leads to warnings - and it is indeed broken to do e.g. u32 foo = cpm_muram_alloc(); if (IS_ERR_VALUE(foo)) on a 64-bit platform, since the condition foo >= (unsigned long)-ENOMEM is tautologically false. There are also callers that ignore the possibility of error, and then there are those that check for error by comparing the return value to 0... One could fix that by changing all callers to store the return value temporarily in an "unsigned long" and test that. However, use of IS_ERR_VALUE() is error-prone and should be restricted to things which are inherently long-sized (stuff in pt_regs etc.). Instead, let's aim for changing to the standard kernel style int foo = cpm_muram_alloc(); if (foo < 0) deal_with_it() some->where = foo; Changing the return type from unsigned long to s32 (aka signed int) doesn't change the value that gets stored into any of the callers' variables except if the caller was storing the result in a u64 _and_ the allocation failed, so in itself this patch should be a no-op. Another problem with cpm_muram_alloc() is that it can certainly validly return 0 - and except if some cpm_muram_alloc_fixed() call interferes, the very first cpm_muram_alloc() call will return just that. But that shows that both ucc_slow_free() and ucc_fast_free() are buggy, since they assume that a value of 0 means "that field was never allocated". We'll later change cpm_muram_free() to accept (and ignore) a negative offset, so callers can use a sentinel of -1 instead of 0 and just unconditionally call cpm_muram_free(). Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: qe_io.c: use of_property_read_u32() in par_io_init()Rasmus Villemoes1-4/+3
This is necessary for this to work on little-endian hosts. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: qe_io.c: access device tree property using be32_to_cpuRasmus Villemoes1-4/+10
We need to apply be32_to_cpu to make this work correctly on little-endian hosts. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: qe_io.c: don't open-code of_parse_phandle()Rasmus Villemoes1-5/+2
Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: qe.c: use of_property_read_* helpersRasmus Villemoes1-25/+8
Instead of manually doing of_get_property/of_find_property and reading the value by assigning to a u32* or u64* and dereferencing, use the of_property_read_* functions. This make the code more readable, and more importantly, is required for this to work correctly on little-endian platforms. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: merge qe_ic.h headers into qe_ic.cRasmus Villemoes2-101/+50
The public qe_ic.h header is no longer included by anything but qe_ic.c. Merge both headers into qe_ic.c, and drop the unused constants. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: simplify qe_ic_init()Rasmus Villemoes1-23/+4
qe_ic_init() takes a flags parameter, but all callers (including the sole remaining one) have always passed 0. So remove that parameter and simplify the body accordingly. We still explicitly initialize the Interrupt Configuration Register (CICR) to its reset value of all-zeroes, just in case the bootloader has played funny games. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: make qe_ic_get_{low,high}_irq staticRasmus Villemoes1-2/+2
These are only called from within qe_ic.c, so make them static. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: don't use NO_IRQ in qe_ic.cRasmus Villemoes1-11/+10
This driver is currently PPC-only, and on powerpc, NO_IRQ is 0, so this doesn't change functionality. However, not every architecture defines NO_IRQ, and some define it as -1, so the detection of a failed irq_of_parse_and_map() (which returns 0 on failure) would be wrong on those. So to prepare for allowing this driver to build on other architectures, drop all references to NO_IRQ. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: remove unused qe_ic_set_* functionsRasmus Villemoes1-94/+0
There are no current callers of these functions, and they use the ppc-specific virq_to_hw(). So removing them gets us one step closer to building QE support for ARM. If the functionality is ever actually needed, the code can be dug out of git and then adapted to work on all architectures, but for future reference please note that I believe qe_ic_set_priority is buggy: The "priority < 4" should be "priority <= 4", and in the else branch 24 should be replaced by 28, at least if I'm reading the data sheet right. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: rename qe_ic_cascade_low_mpic -> qe_ic_cascade_lowRasmus Villemoes1-4/+4
The qe_ic_cascade_{low,high}_mpic functions are now used as handlers both when the interrupt parent is mpic as well as ipic, so remove the _mpic suffix. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: move qe_ic_cascade_* functions to qe_ic.cRasmus Villemoes1-0/+42
These functions are only ever called through a function pointer, and therefore it makes no sense for them to be "static inline" - gcc has no choice but to emit a copy in each translation unit that takes the address of one of these. Since they are now only referenced from qe_ic.c, just make them local to that file. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: move calls of qe_ic_init out of arch/powerpc/Rasmus Villemoes1-3/+26
Having to call qe_ic_init() from platform-specific code makes it awkward to allow building the QE drivers for ARM. It's also a needless duplication of code, and slightly error-prone: Instead of the caller needing to know the details of whether the QUICC Engine High and QUICC Engine Low are actually the same interrupt (see e.g. the machine_is() in mpc85xx_mds_qeic_init), just let the init function choose the appropriate handlers after it has parsed the DT and figured it out. If the two interrupts are distinct, use separate handlers, otherwise use the handler which first checks the CHIVEC register (for the high priority interrupts), then the CIVEC. All existing callers pass 0 for flags, so continue to do that from the new single caller. Later cleanups will remove that argument from qe_ic_init and simplify the body, as well as make qe_ic_init into a proper init function for an IRQCHIP_DECLARE, eliminating the need to manually look up the fsl,qe-ic node. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: remove pointless sysfs registration in qe_ic.cRasmus Villemoes1-31/+0
There's no point in registering with sysfs when that doesn't actually allow any interaction with the device or driver (no uevents, no sysfs files that provide information or allow configuration, no nothing). Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: drop assign-only high_active in qe_ic_initRasmus Villemoes1-4/+2
high_active is only assigned to but never used. Remove it. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: drop unneeded #includesRasmus Villemoes2-7/+0
These includes are not actually needed, and asm/rheap.h and sysdev/fsl_soc.h are PPC-specific, hence prevent compiling QE for other architectures. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: qe.c: guard use of pvr_version_is() with CONFIG_PPC32Rasmus Villemoes1-1/+9
Commit e5c5c8d23fef (soc/fsl/qe: only apply QE_General4 workaround on affected SoCs) introduced use of pvr_version_is(), saying The QE_General4 workaround is only valid for the MPC832x and MPC836x SoCs. The other SoCs that embed a QUICC engine are not affected by this hardware bug and thus can use the computed divisors (this was successfully tested on the T1040). I'm reading the above as saying that the errata does not apply to the ARM-based SOCs with QUICC engine. In any case, use of pvr_version_is() must be guarded by CONFIG_PPC32 before we can remove the PPC32 dependency from CONFIG_QUICC_ENGINE, so introduce qe_general4_errata() to keep the necessary #ifdeffery localized to a trivial helper. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: replace spin_event_timeout by readx_poll_timeout_atomicRasmus Villemoes1-6/+7
In preparation for allowing QE to be built for architectures other than ppc, use the generic readx_poll_timeout_atomic() helper from iopoll.h rather than the ppc-only spin_event_timeout(). Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: avoid ppc-specific io accessorsRasmus Villemoes9-123/+129
In preparation for allowing to build QE support for architectures other than PPC, replace the ppc-specific io accessors by the qe_io* macros. Done via $ spatch --sp-file io.cocci --in-place drivers/soc/fsl/qe/ where io.cocci is @@ expression addr, val; @@ - out_be32(addr, val) + qe_iowrite32be(val, addr) @@ expression addr; @@ - in_be32(addr) + qe_ioread32be(addr) @@ expression addr, val; @@ - out_be16(addr, val) + qe_iowrite16be(val, addr) @@ expression addr; @@ - in_be16(addr) + qe_ioread16be(addr) @@ expression addr, val; @@ - out_8(addr, val) + qe_iowrite8(val, addr) @@ expression addr; @@ - in_8(addr) + qe_ioread8(addr) @@ expression addr, clr, set; @@ - clrsetbits_be32(addr, clr, set) + qe_clrsetbits_be32(addr, clr, set) @@ expression addr, clr, set; @@ - clrsetbits_be16(addr, clr, set) + qe_clrsetbits_be16(addr, clr, set) @@ expression addr, clr, set; @@ - clrsetbits_8(addr, clr, set) + qe_clrsetbits_8(addr, clr, set) @@ expression addr, set; @@ - setbits32(addr, set) + qe_setbits_be32(addr, set) @@ expression addr, set; @@ - setbits16(addr, set) + qe_setbits_be16(addr, set) @@ expression addr, set; @@ - setbits8(addr, set) + qe_setbits_8(addr, set) @@ expression addr, clr; @@ - clrbits32(addr, clr) + qe_clrbits_be32(addr, clr) @@ expression addr, clr; @@ - clrbits16(addr, clr) + qe_clrbits_be16(addr, clr) @@ expression addr, clr; @@ - clrbits8(addr, clr) + qe_clrbits_8(addr, clr) Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: rename qe_(clr/set/clrset)bit* helpersRasmus Villemoes1-5/+5
Make it clear that these operate on big-endian registers (i.e. use the iowrite*be primitives) before we introduce more uses of them and allow the QE drivers to be built for platforms other than ppc32. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: drop volatile qualifier of struct qe_ic::regsRasmus Villemoes2-3/+3
The actual io accessors (e.g. in_be32) implicitly add a volatile qualifier to their address argument. Remove volatile from the struct definition and the qe_ic_(read/write) helpers, in preparation for switching from the ppc-specific io accessors to generic ones. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: remove space-before-tabRasmus Villemoes1-2/+2
Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-05Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-0/+162
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Olof Johansson: "Various driver updates for platforms: - A larger set of work on Tegra 2/3 around memory controller and regulator features, some fuse cleanups, etc.. - MMP platform drivers, in particular for USB PHY, and other smaller additions. - Samsung Exynos 5422 driver for DMC (dynamic memory configuration), and ASV (adaptive voltage), allowing the platform to run at more optimal operating points. - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas - Clock/reset control driver for TI/OMAP - Meson-A1 reset controller support - Qualcomm sdm845 and sda845 SoC IDs for socinfo" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits) firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT soc: fsl: add RCPM driver dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition memory: tegra: Consolidate registers definition into common header memory: tegra: Ensure timing control debug features are disabled memory: tegra: Introduce Tegra30 EMC driver memory: tegra: Do not handle error from wait_for_completion_timeout() memory: tegra: Increase handshake timeout on Tegra20 memory: tegra: Print a brief info message about EMC timings memory: tegra: Pre-configure debug register on Tegra20 memory: tegra: Include io.h instead of iopoll.h memory: tegra: Adapt for Tegra20 clock driver changes memory: tegra: Don't set EMC rate to maximum on probe for Tegra20 memory: tegra: Add gr2d and gr3d to DRM IOMMU group memory: tegra: Set DMA mask based on supported address bits soc: at91: Add Atmel SFR SN (Serial Number) support memory: atmel-ebi: switch to SPDX license identifiers memory: atmel-ebi: move NUM_CS definition inside EBI driver soc: mediatek: Refactor bus protection control soc: mediatek: Refactor sram control ...
2019-11-13soc: fsl: add RCPM driverRan Wang3-0/+162
The NXP's QorIQ processors based on ARM Core have RCPM module (Run Control and Power Management), which performs system level tasks associated with power management such as wakeup source control. Note that this driver will not support PowerPC based QorIQ processors, and it depends on PM wakeup source framework which provide collect wake information. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-10-31dpaa_eth: register a device link for the qman portal usedMadalin Bucur1-6/+0
Before this change, unbinding the QMan portals did not trigger a corresponding unbinding of the dpaa_eth making use of it; the first QMan portal related operation issued afterwards crashed the kernel. The device link ensures the dpaa_eth dependency upon the qman portal used is honoured at the QMan portal removal. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31soc: fsl: qbman: allow registering a device link for the portal userMadalin Bucur1-0/+13
Introduce the API required to make sure that the devices that use the QMan portal are unbound when the portal is unbound. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-17Merge tag 'armsoc-drivers' of ↵Linus Torvalds13-168/+329
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "This contains driver changes that are tightly connected to SoC specific code. Aside from smaller cleanups and bug fixes, here is a list of the notable changes. New device drivers: - The Turris Mox router has a new "moxtet" bus driver for its on-board pluggable extension bus. The same platform also gains a firmware driver. - The Samsung Exynos family gains a new Chipid driver exporting using the soc device sysfs interface - A similar socinfo driver for Qualcomm Snapdragon chips. - A firmware driver for the NXP i.MX DSP IPC protocol using shared memory and a mailbox Other changes: - The i.MX reset controller driver now supports the NXP i.MX8MM chip - Amlogic SoC specific drivers gain support for the S905X3 and A311D chips - A rework of the TI Davinci framebuffer driver to allow important cleanups in the platform code - A couple of device drivers for removed ARM SoC platforms are removed. Most of the removals were picked up by other maintainers, this contains whatever was left" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) bus: uniphier-system-bus: use devm_platform_ioremap_resource() soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access firmware: ti_sci: Allow for device shared and exclusive requests bus: imx-weim: remove incorrect __init annotations fbdev: remove w90x900/nuc900 platform drivers spi: remove w90x900 driver net: remove w90p910-ether driver net: remove ks8695 driver firmware: turris-mox-rwtm: Add sysfs documentation firmware: Add Turris Mox rWTM firmware driver dt-bindings: firmware: Document cznic,turris-mox-rwtm binding bus: moxtet: fix unsigned comparison to less than zero bus: moxtet: remove set but not used variable 'dummy' ARM: scoop: Use the right include dt-bindings: power: add Amlogic Everything-Else power domains bindings soc: amlogic: Add support for Everything-Else power domains controller fbdev: da8xx: use resource management for dma fbdev: da8xx-fb: drop a redundant if fbdev: da8xx-fb: use devm_platform_ioremap_resource() ...
2019-08-16soc: fsl: dpio: remove explicit device_link_removeIoana Ciornei1-2/+0
Starting with commit 72175d4ea4c4 ("driver core: Make driver core own stateful device links") stateful device links are owned by the driver core and should not be explicitly removed on device unbind. Delete all device_link_remove appearances from the dpio driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-16soc: fsl: guts: Add definition for LS1028AYinbo Zhu1-0/+6
Adding compatible string "ls1028a-dcfg" to initialize guts driver for ls1028 and SoC die attribute definition for LS1028A Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-16soc/fsl/qbman: Update device tree with reserved memoryRoy Pledge1-24/+36
When using the reserved memory node in the device tree there are two options - dynamic or static. If a dynamic allocation was selected (where the kernel selects the address for the allocation) convert it to a static allocation by inserting the reg property. This will ensure the same memory is reused after a kexec() Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-16soc/fsl/qbman: Fixup qman_shutdown_fq()Roy Pledge1-11/+42
When shutting down a FQ on a dedicated channel only the SW portal associated with that channel can dequeue from it. Make sure the correct portal is use. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-16soc/fsl/qbman: Disable interrupts during portal recoveryRoy Pledge3-3/+21
Disable the QBMan interrupts during recovery. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-16soc/fsl/qbman: Fix drain_mr_fqni()Roy Pledge1-1/+3
The drain_mr_fqni() function may be called fron uninterruptable context so convert the msleep() to an mdelay(). Also ensure that the valid bit is updated while polling. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-16soc/fsl/qbman: Cleanup QMan queues if device was already initializedRoy Pledge4-4/+38
If the QMan device was previously initialized make sure all the frame queues are out of service once all the portals are probed. This handles the case where the kernel is restarted without the SoC being reset (kexec for example) Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-16soc/fsl/qbman: Cleanup buffer pools if BMan was initialized prior to bootupRoy Pledge4-9/+41
Clean the BMan buffer pools if the device had been initialized previously. This will ensure a consistent state if the kernel was soft restarted (kexec for example) Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-16soc/fsl/qbman: Rework QBMan private memory setupRoy Pledge3-11/+76
Rework QBMan private memory setup so that the areas are not zeroed if the device was previously initialized If the QMan private memory was already initialized skip the PFDR initialization. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-16soc: fsl: qbman: Remove dev_err() usage after platform_get_irq()Stephen Boyd2-6/+2
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Thierry Reding <treding@nvidia.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-07-22Merge branch 'pdf_fixes_v1' of https://git.linuxtv.org/mchehab/experimental ↵Jonathan Corbet1-1/+1
into mauro Bring in a set of post-thrashup fixes from Mauro.
2019-07-22Merge tag 'soc-fsl-next-v5.3-2' of ↵Olof Johansson2-99/+66
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers NXP/FSL SoC driver updates for v5.3 (take 2) DPAA2 Console driver - Add driver to export two char devices to dump logs for MC and AIOP DPAA2 DPIO driver - Add support for memory backed QBMan portals - Increase the timeout period to prevent false error - Add APIs to retrieve QBMan portal probing status DPAA Qman driver - Only make liodn fixup on powerpc SoCs with PAMU iommu QUICC Engine - Add support for importing qe-snums through device tree - Some cleanups and foot print optimzation * tag 'soc-fsl-next-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: qe: fold qe_get_num_of_snums into qe_snums_init soc: fsl: qe: support fsl,qe-snums property dt-bindings: soc: fsl: qe: document new fsl,qe-snums binding soc: fsl: qe: introduce qe_get_device_node helper soc: fsl: qe: reduce static memory footprint by 1.7K soc: fsl: qe: drop useless static qualifier soc: fsl: fix spelling mistake "Firmaware" -> "Firmware" Link: https://lore.kernel.org/r/20190605194511.12127-1-leoyang.li@nxp.com Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-18 21:10:57 +0300