summaryrefslogtreecommitdiff
path: root/drivers/serial
AgeCommit message (Collapse)AuthorFilesLines
2008-10-30[ARM] build fixes for netX serial driverPaul Bolle2-4/+4
Make the netX serial driver tristate (as the help text implied). Make the serial driver build correctly if the netX serial console is disabled. Do not allow the netX serial console if the netX serial driver is build as a module. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-238250: Add more OxSemi devicesLee Howard1-2/+22
These have the Mainpine PCI identifier on however Additional paranoia check for Tornado versions added by Alan Cox (and this time I remembered to do an stg refresh so that the corrections ended up in these patches not randomly attached to another diff -- Alan) Signed-off-by: Lee Howard <lee.howard@mainpine.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-238250: Oxford Semiconductor DevicesLee Howard1-0/+211
Add support for the OxSemi 'Tornado' devices. Reformatted and reworked a bit by Alan Cox Signed-off-by: Lee Howard <lee.howard@mainpine.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-1/+1
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] clps711x: add sparsemem definitions [ARM] 5315/1: Fix section mismatch warning (sa1111) [ARM] Orion: activate workaround for 88f6183 SPI clock erratum [ARM] Orion: instantiate the dsa switch driver [ARM] mv78xx0: force link speed/duplex on eth2/eth3 [ARM] remove extra brace in arch/arm/mach-pxa/trizeps4.c [ARM] balance parenthesis in header file [ARM] pxa: fix trizeps PCMCIA build [ARM] pxa: fix trizeps defconfig [ARM] dmabounce requires ZONE_DMA [ARM] 5303/1: period_cycles should be greater than 1 [ARM] 5310/1: Fix cache flush functions for ARMv4 [ARM] pxa: fix 3bca103a1e658d23737d20e1989139d9ca8973bf [ARM] pxa: fix redefinition of NR_IRQS [ARM] S3C24XX: Fix redefine of DEFINE_TIMER() in s3c24xx pwm-clock.c [ARM] S3C2443: Fix HCLK rate [ARM] S3C24XX: Serial driver debug depends on DEBUG_LL [ARM] S3C24XX: pwm-clock set_parent mask fix
2008-10-21Merge branch 'genirq-v28-for-linus' of ↵Linus Torvalds10-31/+67
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip This merges branches irq/genirq, irq/sparseirq-v4, timers/hpet-percpu and x86/uv. The sparseirq branch is just preliminary groundwork: no sparse IRQs are actually implemented by this tree anymore - just the new APIs are added while keeping the old way intact as well (the new APIs map 1:1 to irq_desc[]). The 'real' sparse IRQ support will then be a relatively small patch ontop of this - with a v2.6.29 merge target. * 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (178 commits) genirq: improve include files intr_remapping: fix typo io_apic: make irq_mis_count available on 64-bit too genirq: fix name space collisions of nr_irqs in arch/* genirq: fix name space collision of nr_irqs in autoprobe.c genirq: use iterators for irq_desc loops proc: fixup irq iterator genirq: add reverse iterator for irq_desc x86: move ack_bad_irq() to irq.c x86: unify show_interrupts() and proc helpers x86: cleanup show_interrupts genirq: cleanup the sparseirq modifications genirq: remove artifacts from sparseirq removal genirq: revert dynarray genirq: remove irq_to_desc_alloc genirq: remove sparse irq code genirq: use inline function for irq_to_desc genirq: consolidate nr_irqs and for_each_irq_desc() x86: remove sparse irq from Kconfig genirq: define nr_irqs for architectures with GENERIC_HARDIRQS=n ...
2008-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2-51/+62
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (112 commits) sh: Move SH-4 CPU headers down one more level. sh: Only build in gpio.o when CONFIG_GENERIC_GPIO is selected. sh: Migrate common board headers to mach-common/. sh: Move the CPU definition headers from asm/ to cpu/. serial: sh-sci: Add support SCIF of SH7723 video: add sh_mobile_lcdc platform flags video: remove unused sh_mobile_lcdc platform data sh: remove consistent alloc cruft sh: add dynamic crash base address support sh: reduce Migo-R smc91x overruns sh: Fix up some merge damage. Fix debugfs_create_file's error checking method for arch/sh/mm/ Fix debugfs_create_dir's error checking method for arch/sh/kernel/ sh: ap325rxa: Add support RTC RX-8564LC in AP325RXA board sh: Use sh7720 GPIO on magicpanelr2 board sh: Add sh7720 pinmux code sh: Use sh7203 GPIO on rsk7203 board sh: Add sh7203 pinmux code sh: Use sh7723 GPIO on AP325RXA board sh: Add sh7723 pinmux code ...
2008-10-20Altix serial: fixroel kluin1-1/+1
In function sn_sal_switch_to_asynch(): drivers/serial/sn_console.c:713: HZ * SN_SAL_UART_FIFO_DEPTH / SN_SAL_UART_FIFO_SPEED_CPS; After preprocessing (see defines in patch) this becomes HZ * 16 / 9600 / 10 (associativity from left to right), not equivalent to HZ * 16 / 960. Looks-obviously-right-to: Tony Luck <tony.luck@intel.com> Cc: Jes Sorensen <jes@sgi.com> Acked-by: Pat Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20make probe_serial_gsc() staticAdrian Bunk1-1/+1
This patch makes the needlessly global probe_serial_gsc() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20serial_txx9: use %lx for iobaseAtsushi Nemoto1-1/+1
Fix a warning caused by commit 0c8946d97ae7d2d6691f8290a10faa63453b63f8 (serial: Make uart_port's ioport "unsigned long".) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Josip Rodin <joy@entuzijast.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20serial: sh-sci: Add support SCIF of SH7723Nobuhiro Iwamatsu1-1/+8
SH7723 has two types of SCIF (SCIF and SCIFA). The current sh-sci driver supports only SCIFA, and calculation methods of SCBRR are different. This patch support this methods. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20Merge branch 'master' of ↵Paul Mundt28-2554/+415
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/kernel-parameters.txt arch/sh/include/asm/elf.h
2008-10-17Merge branch 'for-rmk-fixes' of git://aeryn.fluff.org.uk/bjdooks/linuxRussell King1-1/+1
2008-10-16Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds6-13/+20
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (51 commits) [ARM] 5308/1: Fix Viper ISA IRQ handling [ARM] 5307/1: pxa: fix CM-X2XX PCMCIA build error [ARM] 5306/1: pxa: fix build error on CM-X270 [ARM] 5302/1: ARM: OMAP: Revert omap3 WDT changes to avoid merge conflict [ARM] 5305/1: ARM: OMAP: Fix compile of McBSP by removing unnecessary check [ARM] 5301/1: ARM: OMAP: Add missing irq defines ARM: OMAP3: Add default kernel config for OMAP LDP ARM: OMAP3: Add basic board support for OMAP LDP ARM: OMAP3: Defconfig for the Gumstix Overo board (rev 3) ARM: OMAP3: Add support for the Gumstix Overo board (rev 3) ARM: OMAP3: Add Beagle defconfig ARM: OMAP3: Add minimal Beagle board support ARM: OMAP3: Add minimal omap3430 support ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code ARM: OMAP: Fixes to omap_mcbsp_request function ARM: OMAP: Add support for OMAP2430 in McBSP ARM: OMAP: Add support for McBSP devices 3 - 5 on 34xx ARM: OMAP: Allocate McBSP devices dynamically Fix sections for omap-mcbsp platform driver [ARM] S3C24XX: Additional include moves ...
2008-10-16[ARM] S3C24XX: Serial driver debug depends on DEBUG_LLBen Dooks1-1/+1
The SERIAL_SAMSUNG_DEBUG used printascii() to avoid debugging through itself when selected as a console. Disable this option when DEBUG_LL is not set (printascii is unavailable). Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-16drivers/serial: use nr_irqsYinghai Lu9-10/+10
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16serial, 8250: remove NR_IRQ usageAlan Cox2-21/+57
Works on my test box with a quick test. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16Merge branch 'fixes' into for-linusRussell King14-2293/+285
Conflicts: arch/arm/mach-versatile/core.c
2008-10-15Merge commit 'origin'Benjamin Herrenschmidt18-2317/+383
Manual fixup of conflicts on: arch/powerpc/include/asm/dcr-regs.h drivers/net/ibm_newemac/core.h
2008-10-15Merge branch 's3c-move' into develRussell King6-18/+24
Conflicts: arch/arm/mach-versatile/core.c
2008-10-15Merge branch 'omap-all' into develRussell King1-8/+15
Conflicts: arch/arm/mach-omap2/gpmc.c arch/arm/mach-omap2/irq.c
2008-10-148250: Fix lock warning (and possible crash)Alan Cox1-0/+3
Splitting the 8250 code back up to avoid a clash with the NR_IRQS removal patch introduced a last minute bug. Put back the additional needed lines for the old lock init Signed-off-by: Alan Cox <alan@redhat.com> [ Ingo also reports that this can cause a spontaneous reboot crash with certain configs, and sends in an identical patch ] Tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds1-173/+129
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits) pcmcia: ioctl-internal definitions pcmcia: cistpl header cleanup pcmcia: remove unused argument to pcmcia_parse_tuple() pcmcia: card services header cleanup pcmcia: device_id header cleanup pcmcia: encapsulate ioaddr_t pcmcia: cleanup device driver header file pcmcia: cleanup socket services header file pcmcia: merge ds_internal.h into cs_internal.h pcmcia: cleanup cs_internal.h pcmcia: cs_internal.h is internal pcmcia: use dev_printk for cs_error() pcmcia: remove CS_ error codes alltogether pcmcia: deprecate CS_BAD_TUPLE pcmcia: deprecate CS_BAD_ARGS pcmcia: deprecate CS_BAD_BASE, CS_BAD_IRQ, CS_BAD_OFFSET and CS_BAD_SIZE pcmcia: deprecate CS_BAD_ATTRIBUTE, CS_BAD_TYPE and CS_BAD_PAGE pcmcia: deprecate CS_NO_MORE_ITEMS pcmcia: deprecate CS_IN_USE pcmcia: deprecate CS_CONFIGURATION_LOCKED ... Fix trivial conflict in drivers/pcmcia/ds.c manually
2008-10-13serial: fix device name reporting when minor space is shared between driversDavid S. Miller2-9/+20
The multiple drivers share the minor space occupied by a particular major number, the actual index within the device name's space is indicated by the tty_driver->name_base + uart_port->line Another usable formula is (uart_driver->minor - MINOR_BASE) + port->line Use those to print the device names properly in such situations in serial_core.c and 8250.c Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13tty: simplify ktermios allocationAlan Cox1-3/+0
Copy the simplification from the pty unix98 special case to the generic one. This allows us to kill off driver->termios_locked entirely which is nice. We have to whack bits of the cris driver as it meddles in places it shouldn't providing its own arrays that were never used anyway. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13serial: allow 8250 to be used on sparcDavid Miller3-10/+27
This requires three changes: 1) Remove !SPARC restriction in Kconfig. 2) Move Sparc specific serial drivers before 8250, so that serial console devices don't change names on us, even if 8250 finds devices. 3) Since the Sparc specific serial drivers try to use the same major/minor device namespace as 8250, some coordination is necessary. Use the sunserial_*() layer routines to allocate minor number space within TTY_MAJOR when CONFIG_SPARC. This has no effect on other platforms. Thanks to Josip Rodin for bringing up this issue and testing plus debugging various revisions of this patch. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-138250: remove a few inlines of dubious valueWill Newton1-5/+4
Remove some inlines from various functions that are called once, are too big to inline, or are called only from slow path code. This saves around 300 bytes of code for me. Signed-off-by: Will Newton <will.newton@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13serial_8250: pci_enable_device fail is not fully handledAlan Cox1-2/+2
<rmk> talking about leaks - I noticed that the 'check return of pci_enable_dev()' in the 8250 pci resume function finally made it in despite my objections against it (causing stuff in higher levels to leak). Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13serial-make-uart_ports-ioport-unsigned-long-fixAndrew Morton1-3/+2
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: Fix bug - request UART2/3 peripheral mapped ↵Sonic Zhang1-0/+50
interrupts in PIO mode Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: Fix bug - ircp fails on sir over Blackfin UARTGraf Yang1-0/+4
We now use the sir_dev/irtty_sir/uart/bfin_serial drivers framework to monitor the TX status. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: Fix bug - Don't call tx_stop in tx_transfer.Sonic Zhang1-1/+5
Disable irq and return immediately. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: Remove useless stopSonic Zhang1-3/+0
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: move common variables out of serial headers and into ↵Mike Frysinger1-7/+10
the serial driver move common variables out of serial headers and into the serial driver and rename "nr_ports" to "nr_active_ports" so as to easily differentiate between BFIN_UART_NR_PORTS (the # of available) and nr_ports (the # of enabled) Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: trim trailing whitespace -- no functional changesMike Frysinger1-4/+4
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: Fix bug - should suspend/resume/remove all uart ports.Sonic Zhang1-17/+22
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: use __initdata for data, not __initMike Frysinger1-1/+1
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13coldfire: scheduled SERIAL_COLDFIRE removalAdrian Bunk4-2054/+2
This patch contains the scheduled removal of the obsolete SERIAL_COLDFIRE driver. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13drivers/serial/crisv10.c: add missing put_tty_driverJulia Lawall1-0/+2
alloc_tty_driver is called at the beginning of the function containing the lines of code shown in the patch. Thus, put_tty_driver is needed before returning in the error handling code. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @nr exists@ local idexpression x; expression E,f; position p1,p2,p3; identifier l; statement S; @@ x = alloc_tty_driver@p1(...) ... if (x == NULL) S ... when != E = x when != put_tty_driver(x) when != goto l; ( return \(0\|x\); | return@p3 ...; ) @script:python@ p1 << nr.p1; p3 << nr.p3; @@ print "%s: call on line %s not freed or saved before return on line %s" % (p1[0].file,p1[0].line,p3[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-11Merge branch 'master' of ↵David S. Miller3-22/+76
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: sound/core/memalloc.c
2008-10-11Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2-9/+57
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits) [ARM] 5300/1: fixup spitz reset during boot [ARM] 5295/1: make ZONE_DMA optional [ARM] 5239/1: Palm Zire 72 power management support [ARM] 5298/1: Drop desc_handle_irq() [ARM] 5297/1: [KS8695] Fix two compile-time warnings [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores. [ARM] pxa: allow multi-machine PCMCIA builds [ARM] pxa: add preliminary CPUFREQ support for PXA3xx [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c [ARM] pxa/zylonite: add support for USB OHCI [ARM] ohci-pxa27x: use ioremap() and offset for register access [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph() [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c [ARM] pxa: simplify DMA register definitions [ARM] pxa: make additional DCSR bits valid for PXA3xx [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c ... Fixed up conflicts in arch/arm/mach-versatile/core.c sound/soc/pxa/pxa2xx-ac97.c sound/soc/pxa/pxa2xx-i2s.c manually.
2008-10-10Merge branch 'for-rmk' of git://source.mvista.com/git/linux-davinci-2.6.gitRussell King1-5/+22
Merge branch 'davinci' into devel
2008-10-10Merge branch 'pxa-all' into develRussell King1-0/+5
Conflicts: arch/arm/mach-pxa/Kconfig arch/arm/mach-pxa/corgi.c arch/arm/mach-pxa/include/mach/hardware.h arch/arm/mach-pxa/spitz.c
2008-10-10Merge branch 'ptebits' into develRussell King3-5/+14
Conflicts: arch/arm/Kconfig
2008-10-08[ARM] S3C24XX: Move files out of include/asm-arm/plat-s3c*Ben Dooks5-5/+5
First move of items out of include/asm-arm/plat-s3c* to their new homes under arch/arm/plat-s3c/include/plat and arch/arm/plat-s3c24xx/include/plat directories. Note, we have to create a dummy arch/arm/plat-s3c/Makefile to allow us to add arch/arm/plat-s3c/include/plat to the path. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-07Merge branches 'pxa-core' and 'pxa-machines' into pxa-allRussell King3-5/+14
Conflicts: arch/arm/mach-pxa/Kconfig arch/arm/mach-pxa/pxa25x.c arch/arm/mach-pxa/pxa27x.c
2008-10-02Merge branch 'sh/g3-prep'Paul Mundt2-18/+37
2008-10-02serial: sh-sci: Dynamic clock management depends on HAVE_CLK.Paul Mundt2-31/+16
Presently this is conditionalized on sh, and disabled for sh64. Now that SH-5 ties in to the clock framework, the sh64 exception can be dropped. Additionally, ARM will want to use the same hooks once SH-Mobile G3 grows clock framework support, so switch these paths over to HAVE_CLK now. Once the H8 and ARM sh-sci users hook up HAVE_CLK, the driver can be switched over to having an outright dependency on it and the ifdefs can go away. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-02[ARM] 5250/1: unbalanced enable_irq() for serial_ks8695.c fixDick Hollenbeck1-9/+52
The function ks8695uart_set_termios() would cause an unbalanced enable_irq() generated message to be printk()ed. This is because there was no book keeping support to remember if the calls to enable_irq() and disable_irq() were balanced for the modem control irq. Signed-off-by: Dick Hollenbeck <dick@softplc.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01serial: sh-sci: Handle the general UPF_IOREMAP case.Paul Mundt2-18/+37
Presently we don't do much with UPF_IOREMAP other than special case it for SH-5's onchip_remap() on the early console. Tie this in generically for platforms that need the remap. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-25serial/mpc52xx_uart: remove code associated with !CONFIG_PPC_MERGEKumar Gala1-180/+1
Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore remove the dead code associated with !CONFIG_PPC_MERGE. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>