summaryrefslogtreecommitdiff
path: root/drivers/serial/sh-sci.h
AgeCommit message (Collapse)AuthorFilesLines
2010-02-08serial: sh-sci: Support ARM-based SH-Mobile CPUs.Magnus Damm1-8/+14
Add support for ARM-based SH-Mobile CPUs to the sh-sci driver. Also remove the SCLSR register that is missing on sh772x, sh7705 and SH-Mobile. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-08serial: sh-sci: remove SCIF code in sci_rxd_in()Magnus Damm1-219/+1
Since sci_rxd_in() is used by SCI only, clean up the header file by killing off code dealing with SCIF ports and their register definitions. Also introduce a default sci_rxd_in() function which can be shared by all SCIF-only processors. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-24serial: sh-sci: Convert tremaining ctrl_xxx I/O routines to __raw_xxx.Paul Mundt1-59/+59
ctrl_xxx() is an antiquated SH interface, while __raw_xxx is the standard API that accomplishes the same thing. As such, this converts the remaining sh-sci straggles over, which enables the driver to be wired up for ARM SH-Mobile CPUs as well. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-25serial: sh-sci: Depend on HAVE_CLK unconditionally.Paul Mundt1-1/+1
The sh-sci code conditionalized the clock framework support in order to give the other platforms a chance to catch up. sh64 supported this some time ago and the forthcoming ARM changes handle this as well, this leaves h8300 as the odd one out. H8300 has had since 2.5 to merge it's sh-sci support upstream, and has yet to do so. At this point I will no longer be holding back the driver to support an unreponsive architecture, 7 years is quite enough of a grace period. Support is easily implemented on the architecture if and when it ever decides to merge its changes upstream. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-21sh: Add initial support for SH7757 CPU subtypeYoshihiro Shimoda1-0/+17
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09sh: Fix up the sh64 earlyprintk build.Paul Mundt1-1/+1
sci_rxd_in() on SH-5 wants to be using SCSPTR, not SCSPTR2. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-08serial: sh-sci: Fix up h8300 support.Yoshinori Sato1-2/+15
- Dummy SCIF functions define. - h8300 specific header include. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16serial: sh-sci: SH7724 support.Kuninori Morimoto1-3/+20
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-03sh: Add support for SH7786 CPU subtype.Kuninori Morimoto1-4/+9
This adds preliminary support for the SH7786 CPU subtype. While this is a dual-core CPU, only UP is supported for now. L2 cache support is likewise not yet implemented. More information on this particular CPU subtype is available at: http://www.renesas.com/fmwk.jsp?cnt=sh7786_root.jsp&fp=/products/mpumcu/superh_family/sh7780_series/sh7786_group/ Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-12Merge branch 'sh/stable-updates'Paul Mundt1-1/+1
2009-02-12serial: sh-sci: fix overrun error handling for SH7785 SCIF.Kuninori Morimoto1-1/+1
There was a typo for the overrun bit definition, causing it not to be handled correctly on SH7785, fix it up. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-27sh: use gpiolibMagnus Damm1-1/+1
This patch updates the SuperH gpio code to make use of gpiolib. The gpiolib callbacks get() and set() are lockless, but we use our own spinlock for the other operations to make sure hardware register bitfield accesses stay atomic. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21sh: fix sh-sci / early printk build on sh7723Magnus Damm1-0/+1
This patch adds the SCSPTR register to the sh-sci driver in the case of sh7723 to make sure early printk builds properly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21serial: sh-sci: Fix up SH7720/SH7721 SCI build.Paul Mundt1-1/+3
Missing definitions for PORT_xxx defs. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22serial: sh-sci: Generalize port pin initialization.Paul Mundt1-12/+0
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22serial: sh-sci: Tidy up fifo overrun error handling.Paul Mundt1-6/+5
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add support for SH7201 CPU subtype.Peter Griffin1-2/+20
This patch adds support for the SH-2A FPU based SH7201 processor subtype. Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-11-12serial: sh-sci: fix cannot work SH7723 SCIFAYoshihiro Shimoda1-8/+8
SH7723 has SCIFA. This module is similer SCI register map, but it has FIFO. So this patch adds new type(PORT_SCIFA) and change some type checking. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-31sh: Fix up the shared IRQ demuxer's control bit testing logic.Michael Trimarchi1-0/+1
Correct the interrupt handler in sh4 serial device, return the correct value and check for what is anabled in the SCSCR register. The sh7722 is broken just sending a break using minicom. Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-31Define SCSPTR1 for SH 7751RMatt Fleming1-0/+1
After the recent commit to kill off SCI/SCIF special casing SH 7751R fails to compile with CONFIG_SH_RTS7751R2D set. This is because SCSPTR1 is undefined. Take the value for SCSPTR1 from the SH7751R Group Hardware Manual. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-31sh: Add sci_rxd_in of SH4-202Nobuhiro Iwamatsu1-2/+8
SH4-202 doesn't have SCSXX1. But it is treated so that there is SCSPTR1 in current code. This patch add sci_rxd_in of SH4-202. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-31sh: Change register name SCSPTR to SCSPTR2Nobuhiro Iwamatsu1-1/+1
This change a name of SCSPTR used in sci_rxd_in of SH5-101. SCSPTR is not declared and will become the error. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-28sh: Revert "SH 7366 needs SCIF_ONLY"Paul Mundt1-1/+0
This reverts commit 5ca8c4852fcbbc8a8497c4ee8b2a0a7466f3524c. With the killing off of SCIF_ONLY and its spawn in sh-sci, we no longer require this change, so just revert it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-28Merge branches 'sh/serial-rework' and 'sh/oprofile'Paul Mundt1-67/+15
2008-10-28SH 7366 needs SCIF_ONLYKuninori Morimoto1-0/+1
SH 7366 has compile bug. because there is no SCIF_ONLY for SH 7366. this patch add it. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20serial: sh-sci: Add support SCIF of SH7723Nobuhiro Iwamatsu1-1/+8
SH7723 has two types of SCIF (SCIF and SCIFA). The current sh-sci driver supports only SCIFA, and calculation methods of SCBRR are different. This patch support this methods. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-02serial: sh-sci: Kill off all of the SCI/SCIF special casing.Paul Mundt1-67/+15
This was added at a time when the compiler did a less than stellar job of optimizing out dead code. These days this tends to be less of a concern, so kill it all off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-02Merge branch 'sh/g3-prep'Paul Mundt1-6/+4
2008-10-02serial: sh-sci: Dynamic clock management depends on HAVE_CLK.Paul Mundt1-3/+1
Presently this is conditionalized on sh, and disabled for sh64. Now that SH-5 ties in to the clock framework, the sh64 exception can be dropped. Additionally, ARM will want to use the same hooks once SH-Mobile G3 grows clock framework support, so switch these paths over to HAVE_CLK now. Once the H8 and ARM sh-sci users hook up HAVE_CLK, the driver can be switched over to having an outright dependency on it and the ifdefs can go away. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01serial: sh-sci: Handle the general UPF_IOREMAP case.Paul Mundt1-6/+4
Presently we don't do much with UPF_IOREMAP other than special case it for SH-5's onchip_remap() on the early console. Tie this in generically for platforms that need the remap. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29serial: sh-sci: Fix up SH7760/SH7780/SH7785 early printk regression.Paul Mundt1-5/+7
As noted by Manuel: Commit c63847a3621d2bac054f5709783860ecabd0ee7e ("sh: Add SCIF2 support for SH7763.") broke build with CONFIG_EARLY_PRINTK enabled for me (SH7760): CC arch/sh/kernel/early_printk.o /mnt/work/sh7760/kernel/linux-2.6.git/arch/sh/kernel/early_printk.c: In function 'scif_sercon_putc': /mnt/work/sh7760/kernel/linux-2.6.git/arch/sh/kernel/early_printk.c:84: error: implicit declaration of function 'sci_SCFDR_in' Move the SH7763 definitions out on their own, so they don't create additional confusion within the SH7760/SH7780/SH7785 block. Restore the deleted SCFDR definition for these parts. Reported-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Add SCIF2 support for SH7763.Nobuhiro Iwamatsu1-11/+27
SH7763 has 3 SCIF device. Current code supports SCIF0 and 1. SCIF0 and 1 are same register constitution, but only SCIF2 is different. I added support of SCIF2. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh-sci: avoid writing to nonexistent registersMagnus Damm1-1/+1
Only write to hardware in SCI_OUT() if the register size is valid. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh-sci: sh7722 lacks scsptr registersMagnus Damm1-0/+4
The sh7722 serial ports all lack SCSPTR registers, so mark them as nonexistent in the register table. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh-sci: improve sh7722 supportMagnus Damm1-4/+17
Improve sh7722 support for SCIF1 and SCIF2 and separate code from sh7366 implementation. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Add support for SH7723 CPU subtype.Paul Mundt1-15/+45
This adds basic support for the SH7723 MobileR2 CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14serial: sh-sci: Fix up SH-5 build.Paul Mundt1-1/+0
asm/hardware.h doesn't exist any more, and the definitions sh-sci.h depended on are provided through asm/cpu/addrspace.h these days. Kill off the bogus include. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: add support for sh7366 processorMagnus Damm1-1/+7
This patch adds sh7366 cpu supports. Just the most basic things like interrupt controller, clocks and serial port are included at this point. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add support for SH7763 CPU subtype.Yoshihiro Shimoda1-1/+18
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add support for SH7721 CPU subtype.Yoshihiro Shimoda1-7/+14
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add SH7263 CPU support.Paul Mundt1-2/+4
This adds support for the SH7263 (SH-2A) CPU. This particular CPU is a superset of SH7203, adding some additional peripheral blocks and hooking up additional (reserved on SH7203) vectors in the INTC block. No visibly nasty surprises, yet.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add SH7203 CPU support.Paul Mundt1-2/+4
This adds support for the SH7203 (SH-2A) CPU. Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Remove SCI_NPORTS from sh-sci.hNobuhiro Iwamatsu1-1/+0
When SH7710 and SH7712 are used, SCI_NPORTS redefined. Remove it. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Kill off the remaining ST40 cruft.Paul Mundt1-17/+1
The ST40 stuff in-tree hasn't built for some time, and hasn't been updated for over 3 years. ST maintains their own out-of-tree changes and rebases occasionally, and that's ultimately where all of the ST40 users go anyways. In order for the ST40 code to be brought up to date most of the stuff removed in this changeset would have to be rewritten anyways, so there's very little benefit in keeping the remnants around either. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Add SH7720 CPU support.Markus Brunner1-8/+25
This adds support for the SH7720 (SH3-DSP) CPU. Signed-off by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21serial: sh-sci: Shut up compiler warning for SH-X3 SCIF.Paul Mundt1-0/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26sh: remove support for sh7300 and solution engine 7300Magnus Damm1-22/+8
This patch removes old dead code: - kill off sh7300 cpu support - get rid of broken solution engine 7300 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26sh: sh-sci - fix SH7708 supportMagnus Damm1-17/+8
This patch makes sure the sci serial port driver compiles for sh7708. The approach taken is to treat the sh7708 as a subset of sh7706, sh7707, sh7709. sh7708 is very similar to sh7706, sh7707, sh7709, but only equipped with a single sci port. The platform data in setup-sh770x.c already limits the number of serial ports for sh7708 to a single one, so the non-existing scif ports pointed out in sh-sci.h will remain unused in case of sh7708. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-25sh: remove support for sh73180 and solution engine 73180Magnus Damm1-11/+0
This patch removes old dead code: - kill off sh73180 cpu support - get rid of broken solution engine 73180 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-20sh: Preliminary support for the SH-X3 CPU.Paul Mundt1-2/+23
This adds basic support for UP SH-X3. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-26 16:09:42 +0300