summaryrefslogtreecommitdiff
path: root/drivers/serial/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2006-06-25[ARM] 3639/1: S3C2412: serial port supportBen Dooks1-3/+6
Patch from Ben Dooks Serial port support for the on-board UART blocks on the Samsung S3C2412 and S3C2413 UARTs. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-23Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds1-0/+19
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial: [ARM] 3600/1: increase amba-pl010 UART_NR to 8 [ARM] 3571/1: netX: serial driver for Hilscher netX
2006-06-19[ARM] 3592/1: AT91RM9200 Serial driver updateAndrew Victor1-8/+9
Patch from Andrew Victor This patch includes a number of updates to the AT91RM9200 serial driver. Changes include: 1. Conversion to a platform_driver. [Ivan Kokshaysky] 2. Replaced all references to AT91RM9200 with AT91. This driver can now also be used for the AT91SAM9216. 3. Allow TIOCM_LOOP to configure local loopback mode. 4. Cleaned up the 'read_status_mask' usage and interrupt handler code. [Chip Coldwell] 5. Suspend/resume support. [David Brownell] There are a few 'unused variable' warning when compiling this - I removed the new DMA support to keep this first patch simpler. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3571/1: netX: serial driver for Hilscher netXSascha Hauer1-0/+19
Patch from Sascha Hauer This patch adds the serial driver for Hilscher's netX network processors. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-30[SERIAL] Allow 8250 PCI, PNP, GSC and HP300 support to be disabledRussell King1-0/+27
Allow the 8250 probe modules to be disabled if we're building for with EMBEDDED enabled. This reduces the kernel size by not including unnecessary probe module support. Original idea from Matt Mackall for PCI only, expanded to others by rmk. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-27[SERIAL] Remove obsoleted au1x00_uart driverRalf Baechle1-16/+0
As announced in feature-removal-schedule.txt. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-25[SERIAL] remove 8250_acpi (replaced by 8250_pnp and PNPACPI)Bjorn Helgaas1-8/+0
With the combination of PNPACPI and 8250_pnp, we no longer need 8250_acpi. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-25[SERIAL] icom: select FW_LOADERmaximilian attems1-0/+1
The icom driver uses request_firmware() and thus needs to select FW_LOADER. Signed-off-by: maximilian attems <maks@sternwelten.at> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-22[PATCH] serial: serial_txx9 driver updateAtsushi Nemoto1-1/+1
Update the serial_txx9 driver. * More strict check in verify_port. Cleanup. * Do not insert a char caused previous overrun. * Fix some spin_locks. * Do not call uart_add_one_port for absent ports. Also, this patch removes a BROKEN tag from Kconfig. This driver has been marked as BROKEN by removal of uart_register_port, but it has been solved already on Sep 2005. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-20[SPARC64]: Add SUN4V Hypervisor Console driver.David S. Miller1-0/+7
Since it can do things like BREAK and HUP, we implement this as a serial uart driver. This still needs interrupt probing code, as I haven't figured out how interrupts will work or be probed for on SUN4V yet. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-15[SERIAL] Documentation/jsm.txt is a no show.Arthur Othieno1-2/+2
In kernel bugzilla #5176 (http://bugzilla.kernel.org/show_bug.cgi?id=5176) Harry R\374ter <h.rueter@gmx.de> points out Documentation/jsm.txt is missing. No one at Digi seems to care, so just remove the stale reference. Signed-off-by: Arthur Othieno <apgo@patchbomb.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-04Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds1-0/+1
2006-02-04[SERIAL] 8250: limit range of runtime portsRussell King1-0/+1
Prevent SERIAL_8250_RUNTIME_UARTS being larger than SERIAL_8250_NR_UARTS. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-03[PATCH] jsm: update for tty buffering revampV. Ananda Krishnan1-14/+14
Signed-off-by: V. Ananda Krishnan <mansarov@us.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-23[SERIAL] 8250 Documentation fixTimothy Charles McGrath1-1/+1
This fixes the documentation error for 'SERIAL_8250' in drivers/serial/Kconfig Signed-off-by: Timothy Charles McGrath <tmHikaru@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19[ARM] 3268/1: AT91RM9200 serial update for 2.6.15-git12Andrew Victor1-1/+1
Patch from Andrew Victor This patch fixes two small issues with 2.6.15-git12. 1) Corrected major/minor numbers for ttyAT devices in the KConfig help. (Patch from Karl Olsen) 2) tty->flip.count has been removed. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-15Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds1-1/+1
2006-01-15[PATCH] Altix: ioc3 serial supportPatrick Gefre1-1/+8
Add driver support for a 2 port PCI IOC3-based serial card on Altix boxes: This is a re-submission. On the original submission I was asked to organize the code so that the MIPS ioc3 ethernet and serial parts could be used with this driver. Stanislaw Skowronek was kind enough to provide the shim layer for this - thanks Stanislaw. This patch includes the shim layer and the Altix PCI ioc3 serial driver. The MIPS merged ioc3 ethernet and serial support is forthcoming. Signed-off-by: Patrick Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14[SERIAL] fix SERIAL_M32R_PLDSIO dependenciesAdrian Bunk1-1/+1
This patch fixes a typo in the dependencies reported by Jean-Luc Leger <reiga@dspnet.fr.eu.org>. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-12Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-0/+34
2006-01-10[ARM] 3242/2: AT91RM9200 support for 2.6 (Serial)Andrew Victor1-0/+34
Patch from Andrew Victor This patch adds support to the 2.6 kernel series for the Atmel AT91RM9200 processor. This patch is the Serial driver. This version uses the newly re-written GPL'ed hardware headers. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-10[PATCH] tty-layer-buffering-revamp: jsm is brokenAndrew Morton1-1/+1
Looks like JSM will be uncompilable after the TTY layer rework is merged into Linus's post-2.6.15 tree. It was complex to fix - the maintainers were notified in September. Cc: Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-23/+0
2006-01-09[ARM] Remove EPXA10DB machine supportRussell King1-23/+0
EPXA10DB seems to be uncared for: - the "PLD" code has never been merged - no one has reported that this platform has been broken since at least 2.6.10 - interest seems to have dried up around March 2003. Therefore, remove EPXA10DB support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-08[SERIAL] Make the number of UARTs registered configurable.Dave Jones1-0/+10
Also add a nr_uarts module option to the 8250 code to override this, up to a maximum of CONFIG_SERIAL_8250_NR_UARTS This should appease people who complain about a proliferation of /dev/ttyS & /sysfs nodes whilst at the same time allowing a single kernel image to support the rarer occasions of lots of devices. Signed-off-by: Dave Jones <davej@redhat.com>
2005-12-23[SPARC]: introduce a SPARC Kconfig symbolAdrian Bunk1-5/+5
Introduce a Kconfig symbol SPARC that is defined on both the sparc and sparc64 architectures. This symbol makes some dependencies more readable. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-19[PARISC] Make Serial MUX depend on a specific bus type.Matthew Wilcox1-1/+1
Depend on GSC, not PARISC. Machines without GSC don't have a MUX. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-11-06[SERIAL] Support Au1x00 8250 UARTs using the generic 8250 driver.Pantelis Antoniou1-0/+8
The offsets of the registers are in a different place, and some parts cannot handle a full set of modem control signals. Signed-off-by: Pantelis Antoniou <pantelis@embeddedalley.ocm> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-08Merge linux-2.6 with linux-acpi-2.6Len Brown1-1/+1
2005-09-05[PATCH] mips: clean up 32/64-bit configurationRalf Baechle1-1/+1
Start cleaning 32-bit vs. 64-bit configuration. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-03Merge linux-2.6 into linux-acpi-2.6 testLen Brown1-1/+1
2005-09-01[ARM] 2866/1: add i.MX set_mctrl / get_mctrl functionsSascha Hauer1-1/+1
Patch from Sascha Hauer This patch adds support for setting and getting RTS / CTS via set_mtctrl / get_mctrl functions. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-25Merge HEAD from ../from-linus Len Brown1-2/+2
2005-08-24[ACPI] delete CONFIG_ACPI_BUSLen Brown1-1/+1
it is a synonym for CONFIG_ACPI Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-24[PATCH] Kconfig fix (amba on arm/versatile)Al Viro1-1/+1
AMBA_PL010 is broken on arm/versatile; marked as such Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-24[PATCH] Kconfig fix (M32R_PLDSIO dependecies)Al Viro1-1/+1
M32R_PLDSIO depends on subarchitecture providing PLD_ESIO0CR and friends. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-18[PATCH] ARM: 2818/1: BAST - Use platform device for SuperIO 16550sBen Dooks1-7/+0
Patch from Ben Dooks Use platform device for the 16500 UARTs in the onboard SuperIO controller. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29[PATCH] Serial: Split 8250 port table (part 2)Russell King1-1/+1
Remove legacy ISA serial ports for Accent, Boca, Fourport, Hub6 and MCA from the architecture specific serial.h include. The only ports which remain in asm-*/serial.h are the platform specific entries. These should really be converted by platform maintainers to use a platform device, such as can be found in arch/arm/mach-footbridge/isa.c Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-27[PATCH] Serial: Split 8250 port tableRussell King1-16/+59
Add separate files for the different 8250 ISA-based serial boards. Looking across all the various architectures, it seems reasonable that we can key the availability of the configuration options for these beasts to the bus-related symbols (iow, CONFIG_ISA). We also standardise the base baud/uart clock rate for these boards - I'm sure that isn't architecture specific, but is solely dependent on the crystal fitted on the board (which should be the same no matter what type of machine its fitted into.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-22[PATCH] ioc4: CONFIG splitBrent Casavant1-0/+9
The SGI IOC4 I/O controller chip drivers are currently all configured by CONFIG_BLK_DEV_SGIIOC4. This is undesirable as not all IOC4 hardware features are needed by all systems. This patch adds two configuration variables, CONFIG_SGI_IOC4 for core IOC4 driver support (see patch 1/3 in this series for further explanation) and CONFIG_SERIAL_SGI_IOC4 to independently enable serial port support. Signed-off-by: Brent Casavant <bcasavan@sgi.com> Acked-by: Pat Gefre <pfg@sgi.com> Acked-by: Jeremy Higdon <jeremy@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22[PATCH] ppc64 iSeries: allow build with no PCIStephen Rothwell1-1/+1
This patch allows iSeries to build with CONFIG_PCI=n. This is useful for partitions that have only virtual I/O. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+846
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 00:24:42 +0300