summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2023-07-27scsi: sg: Fix checking return value of blk_get_queue()Yu Kuai1-3/+4
commit 80b6051085c5fedcb1dfd7b2562a63a83655c4d8 upstream. Commit fcaa174a9c99 ("scsi/sg: don't grab scsi host module reference") make a mess how blk_get_queue() is called, blk_get_queue() returns true on success while the caller expects it returns 0 on success. Fix this problem and also add a corresponding error message on failure. Fixes: fcaa174a9c99 ("scsi/sg: don't grab scsi host module reference") Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Closes: https://lore.kernel.org/all/87lefv622n.fsf@linux.ibm.com/ Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20230705024001.177585-1-yukuai1@huaweicloud.com Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27scsi/sg: don't grab scsi host module referenceYu Kuai1-3/+3
commit fcaa174a9c995cf0af3967e55644a1543ea07e36 upstream. In order to prevent request_queue to be freed before cleaning up blktrace debugfs entries, commit db59133e9279 ("scsi: sg: fix blktrace debugfs entries leakage") use scsi_device_get(), however, scsi_device_get() will also grab scsi module reference and scsi module can't be removed. It's reported that blktests can't unload scsi_debug after block/001: blktests (master) # ./check block block/001 (stress device hotplugging) [failed] +++ /root/blktests/results/nodev/block/001.out.bad 2023-06-19 Running block/001 Stressing sd +modprobe: FATAL: Module scsi_debug is in use. Fix this problem by grabbing request_queue reference directly, so that scsi host module can still be unloaded while request_queue will be pinged by sg device. Reported-by: Chaitanya Kulkarni <chaitanyak@nvidia.com> Link: https://lore.kernel.org/all/1760da91-876d-fc9c-ab51-999a6f66ad50@nvidia.com/ Fixes: db59133e9279 ("scsi: sg: fix blktrace debugfs entries leakage") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230621160111.1433521-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27scsi: sg: fix blktrace debugfs entries leakageYu Kuai1-0/+9
[ Upstream commit db59133e927916d8a25ee1fd8264f2808040909d ] sg_ioctl() support to enable blktrace, which will create debugfs entries "/sys/kernel/debug/block/sgx/", however, there is no guarantee that user will remove these entries through ioctl, and deleting sg device doesn't cleanup these blktrace entries. This problem can be fixed by cleanup blktrace while releasing request_queue, however, it's not a good idea to do this special handling in common layer just for sg device. Fix this problem by shutdown bltkrace in sg_device_destroy(), where the device is deleted and all the users close the device, also grab a scsi_device reference from sg_add_device() to prevent scsi_device to be freed before sg_device_destroy(); Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20230610022003.2557284-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-23scsi: qla2xxx: Fix end of loop testDan Carpenter1-1/+1
commit 339020091e246e708c1381acf74c5f8e3fe4d2b5 upstream. This loop will exit successfully when "found" is false or in the failure case it times out with "wait_iter" set to -1. The test for timeouts is impossible as is. Fixes: b843adde8d49 ("scsi: qla2xxx: Fix mem access after free") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/cea5a62f-b873-4347-8f8e-c67527ced8d2@kili.mountain Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: qla2xxx: Remove unused nvme_ls_waitq wait queueManish Rangankar2-4/+0
commit 20fce500b232b970e40312a9c97e7f3b6d7a709c upstream. System crash when qla2x00_start_sp(sp) returns error code EGAIN and wake_up gets called for uninitialized wait queue sp->nvme_ls_waitq. qla2xxx [0000:37:00.1]-2121:5: Returning existing qpair of ffff8ae2c0513400 for idx=0 qla2xxx [0000:37:00.1]-700e:5: qla2x00_start_sp failed = 11 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021 Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc] RIP: 0010:__wake_up_common+0x4c/0x190 RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320 RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8 R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __wake_up_common_lock+0x7c/0xc0 qla_nvme_ls_req+0x355/0x4c0 [qla2xxx] ? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc] ? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc] ? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc] Remove unused nvme_ls_waitq wait queue. nvme_ls_waitq logic was removed previously in the commits tagged Fixed: below. Fixes: 219d27d7147e ("scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands") Fixes: 5621b0dd7453 ("scsi: qla2xxx: Simpify unregistration of FC-NVMe local/remote ports") Cc: stable@vger.kernel.org Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230615074633.12721-1-njavali@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: qla2xxx: Pointer may be dereferencedShreyas Deodhar1-0/+2
commit 00eca15319d9ce8c31cdf22f32a3467775423df4 upstream. Klocwork tool reported pointer 'rport' returned from call to function fc_bsg_to_rport() may be NULL and will be dereferenced. Add a fix to validate rport before dereferencing. Cc: stable@vger.kernel.org Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230607113843.37185-7-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: qla2xxx: Correct the index of arrayBikash Hazarika1-1/+4
commit b1b9d3825df4c757d653d0b1df66f084835db9c3 upstream. Klocwork reported array 'port_dstate_str' of size 10 may use index value(s) 10..15. Add a fix to correct the index of array. Cc: stable@vger.kernel.org Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230607113843.37185-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: qla2xxx: Check valid rport returned by fc_bsg_to_rport()Nilesh Javali1-0/+4
commit af73f23a27206ffb3c477cac75b5fcf03410556e upstream. Klocwork reported warning of rport maybe NULL and will be dereferenced. rport returned by call to fc_bsg_to_rport() could be NULL and dereferenced. Check valid rport returned by fc_bsg_to_rport(). Cc: stable@vger.kernel.org Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230607113843.37185-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: qla2xxx: Fix potential NULL pointer dereferenceBikash Hazarika1-1/+2
commit 464ea494a40c6e3e0e8f91dd325408aaf21515ba upstream. Klocwork tool reported 'cur_dsd' may be dereferenced. Add fix to validate pointer before dereferencing the pointer. Cc: stable@vger.kernel.org Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230607113843.37185-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: qla2xxx: Fix buffer overrunQuinn Tran1-1/+1
commit b68710a8094fdffe8dd4f7a82c82649f479bb453 upstream. Klocwork warning: Buffer Overflow - Array Index Out of Bounds Driver uses fc_els_flogi to calculate size of buffer. The actual buffer is nested inside of fc_els_flogi which is smaller. Replace structure name to allow proper size calculation. Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230607113843.37185-6-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: qla2xxx: Avoid fcport pointer dereferenceNilesh Javali1-2/+2
commit 6b504d06976fe4a61cc05dedc68b84fadb397f77 upstream. Klocwork reported warning of NULL pointer may be dereferenced. The routine exits when sa_ctl is NULL and fcport is allocated after the exit call thus causing NULL fcport pointer to dereference at the time of exit. To avoid fcport pointer dereference, exit the routine when sa_ctl is NULL. Cc: stable@vger.kernel.org Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230607113843.37185-4-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: qla2xxx: Array index may go out of boundNilesh Javali1-1/+2
commit d721b591b95cf3f290f8a7cbe90aa2ee0368388d upstream. Klocwork reports array 'vha->host_str' of size 16 may use index value(s) 16..19. Use snprintf() instead of sprintf(). Cc: stable@vger.kernel.org Co-developed-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230607113843.37185-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: qla2xxx: Fix mem access after freeQuinn Tran2-73/+95
commit b843adde8d490934d042fbe9e3e46697cb3a64d2 upstream. System crash, where driver is accessing scsi layer's memory (scsi_cmnd->device->host) to search for a well known internal pointer (vha). The scsi_cmnd was released back to upper layer which could be freed, but the driver is still accessing it. 7 [ffffa8e8d2c3f8d0] page_fault at ffffffff86c010fe [exception RIP: __qla2x00_eh_wait_for_pending_commands+240] RIP: ffffffffc0642350 RSP: ffffa8e8d2c3f988 RFLAGS: 00010286 RAX: 0000000000000165 RBX: 0000000000000002 RCX: 00000000000036d8 RDX: 0000000000000000 RSI: ffff9c5c56535188 RDI: 0000000000000286 RBP: ffff9c5bf7aa4a58 R8: ffff9c589aecdb70 R9: 00000000000003d1 R10: 0000000000000001 R11: 0000000000380000 R12: ffff9c5c5392bc78 R13: ffff9c57044ff5c0 R14: ffff9c56b5a3aa00 R15: 00000000000006db ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 8 [ffffa8e8d2c3f9c8] qla2x00_eh_wait_for_pending_commands at ffffffffc0646dd5 [qla2xxx] 9 [ffffa8e8d2c3fa00] __qla2x00_async_tm_cmd at ffffffffc0658094 [qla2xxx] Remove access of freed memory. Currently the driver was checking to see if scsi_done was called by seeing if the sp->type has changed. Instead, check to see if the command has left the oustanding_cmds[] array as sign of scsi_done was called. Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230428075339.32551-6-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: qla2xxx: Wait for io return on terminate rportQuinn Tran1-0/+13
commit fc0cba0c7be8261a1625098bd1d695077ec621c9 upstream. System crash due to use after free. Current code allows terminate_rport_io to exit before making sure all IOs has returned. For FCP-2 device, IO's can hang on in HW because driver has not tear down the session in FW at first sign of cable pull. When dev_loss_tmo timer pops, terminate_rport_io is called and upper layer is about to free various resources. Terminate_rport_io trigger qla to do the final cleanup, but the cleanup might not be fast enough where it leave qla still holding on to the same resource. Wait for IO's to return to upper layer before resources are freed. Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230428075339.32551-7-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: qla2xxx: Fix hang in task managementQuinn Tran2-3/+61
commit 9ae615c5bfd37bd091772969b1153de5335ea986 upstream. Task management command hangs where a side band chip reset failed to nudge the TMF from it's current send path. Add additional error check to block TMF from entering during chip reset and along the TMF path to cause it to bail out, skip over abort of marker. Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230428075339.32551-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: qla2xxx: Fix task management cmd fail due to unavailable resourceQuinn Tran2-5/+61
commit 6a87679626b51b53fbb6be417ad8eb083030b617 upstream. Task management command failed with status 2Ch which is a result of too many task management commands sent to the same target. Hence limit task management commands to 8 per target. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202304271952.NKNmoFzv-lkp@intel.com/ Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230428075339.32551-4-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: qla2xxx: Fix task management cmd failureQuinn Tran4-23/+139
commit 9803fb5d27597ea98f2e05b0b6cfc48ae808458e upstream. Task management cmd failed with status 30h which means FW is not able to finish processing one task management before another task management for the same lun. Hence add wait for completion of marker to space it out. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202304271802.uCZfwQC1-lkp@intel.com/ Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230428075339.32551-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com <mailto:himanshu.madhani@oracle.com>> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: qla2xxx: Multi-que support for TMFQuinn Tran4-18/+66
commit d90171dd0da50212f5950cc708240831e82f2f91 upstream. Add queue flush for task management command, before placing it on the wire. Do IO flush for all Request Q's. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202304271702.GpIL391S-lkp@intel.com/ Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230428075339.32551-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com <mailto:himanshu.madhani@oracle.com>> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: lpfc: Fix double free in lpfc_cmpl_els_logo_acc() caused by ↵Justin Tee3-45/+10
lpfc_nlp_not_used() commit 97f975823f8196d970bd795087b514271214677a upstream. Smatch detected a double free path because lpfc_nlp_not_used() releases an ndlp object before reaching lpfc_nlp_put() at the end of lpfc_cmpl_els_logo_acc(). Remove the outdated lpfc_nlp_not_used() routine. In lpfc_mbx_cmpl_ns_reg_login(), replace the call with lpfc_nlp_put(). In lpfc_cmpl_els_logo_acc(), replace the call with lpfc_unreg_rpi() and keep the lpfc_nlp_put() at the end of the routine. If ndlp's rpi was registered, then lpfc_unreg_rpi()'s completion routine performs the final ndlp clean up after lpfc_nlp_put() is called from lpfc_cmpl_els_logo_acc(). Otherwise if ndlp has no rpi registered, the lpfc_nlp_put() at the end of lpfc_cmpl_els_logo_acc() is the final ndlp clean up. Fixes: 4430f7fd09ec ("scsi: lpfc: Rework locations of ndlp reference taking") Cc: <stable@vger.kernel.org> # v5.11+ Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/all/Y3OefhyyJNKH%2Fiaf@kili/ Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230417191558.83100-3-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: mpi3mr: Propagate sense data for admin queue SCSI I/OSathya Prakash1-0/+5
commit f762326b2baa86ae647e2ba6832bc87e238f68ad upstream. Copy the sense data to internal driver buffer when the firmware completes any SCSI I/O command sent through admin queue with sense data for further use. Fixes: 506bc1a0d6ba ("scsi: mpi3mr: Add support for MPT commands") Cc: <stable@vger.kernel.org> Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Link: https://lore.kernel.org/r/20230531184025.3803-1-sumit.saxena@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: qla2xxx: Fix error code in qla2x00_start_sp()Dan Carpenter1-1/+1
[ Upstream commit e579b007eff3ff8d29d59d16214cd85fb9e573f7 ] This should be negative -EAGAIN instead of positive. The callers treat non-zero error codes the same so it doesn't really impact runtime beyond some trivial differences to debug output. Fixes: 80676d054e5a ("scsi: qla2xxx: Fix session cleanup hang") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/49866d28-4cfe-47b0-842b-78f110e61aab@moroto.mountain Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19scsi: lpfc: Revise NPIV ELS unsol rcv cmpl logic to drop ndlp based on nlp_stateJustin Tee1-2/+12
[ Upstream commit 9914a3d033d3e1d836a43e93e9738e7dd44a096a ] When NPIV ports are zoned to devices that support both initiator and target mode, a remote device's initiated PRLI results in unintended final kref clean up of the device's ndlp structure. This disrupts NPIV ports' discovery for target devices that support both initiator and target mode. Modify the NPIV lpfc_drop_node clause such that we allow the ndlp to live so long as it was in NLP_STE_PLOGI_ISSUE, NLP_STE_REG_LOGIN_ISSUE, or NLP_STE_PRLI_ISSUE nlp_state. This allows lpfc's issued PRLI completion routine to determine if the final kref clean up should execute rather than a remote device's issued PRLI. Fixes: db651ec22524 ("scsi: lpfc: Correct used_rpi count when devloss tmo fires with no recovery") Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230523183206.7728-5-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19scsi: 3w-xxxx: Add error handling for initialization failure in tw_probe()Yuchen Yang1-1/+3
[ Upstream commit 2e2fe5ac695a00ab03cab4db1f4d6be07168ed9d ] Smatch complains that: tw_probe() warn: missing error code 'retval' This patch adds error checking to tw_probe() to handle initialization failure. If tw_reset_sequence() function returns a non-zero value, the function will return -EINVAL to indicate initialization failure. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yuchen Yang <u202114568@hust.edu.cn> Link: https://lore.kernel.org/r/20230505141259.7730-1-u202114568@hust.edu.cn Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19scsi: qedf: Fix NULL dereference in error handlingJinhong Zhu1-2/+1
[ Upstream commit f025312b089474a54e4859f3453771314d9e3d4f ] Smatch reported: drivers/scsi/qedf/qedf_main.c:3056 qedf_alloc_global_queues() warn: missing unwind goto? At this point in the function, nothing has been allocated so we can return directly. In particular the "qedf->global_queues" have not been allocated so calling qedf_free_global_queues() will lead to a NULL dereference when we check if (!gl[i]) and "gl" is NULL. Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Signed-off-by: Jinhong Zhu <jinhongzhu@hust.edu.cn> Link: https://lore.kernel.org/r/20230502140022.2852-1-jinhongzhu@hust.edu.cn Reviewed-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-15scsi: lpfc: Fix incorrect big endian type assignment in bsg loopback pathJustin Tee1-4/+4
The kernel test robot reported sparse warnings regarding incorrect type assignment for __be16 variables in bsg loopback path. Change the flagged lines to use the be16_to_cpu() and cpu_to_be16() macros appropriately. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230614175944.3577-1-justintee8345@gmail.com Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306110819.sDIKiGgg-lkp@intel.com/ Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-15scsi: storvsc: Always set no_report_opcodesMichael Kelley1-0/+2
Hyper-V synthetic SCSI devices do not support the MAINTENANCE_IN SCSI command, so scsi_report_opcode() always fails, resulting in messages like this: hv_storvsc <guid>: tag#205 cmd 0xa3 status: scsi 0x2 srb 0x86 hv 0xc0000001 The recently added support for command duration limits calls scsi_report_opcode() four times as each device comes online, which significantly increases the number of messages logged in a system with many disks. Fix the problem by always marking Hyper-V synthetic SCSI devices as not supporting scsi_report_opcode(). With this setting, the MAINTENANCE_IN SCSI command is not issued and no messages are logged. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1686343101-18930-1-git-send-email-mikelley@microsoft.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-15scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinitySagar Biradar4-3/+43
Fix the I/O hang that arises because of the MSIx vector not having a mapped online CPU upon receiving completion. SCSI cmds take the blk_mq route, which is setup during init. Reserved cmds fetch the vector_no from mq_map after init is complete. Before init, they have to use 0 - as per the norm. Reviewed-by: Gilbert Wu <gilbert.wu@microchip.com> Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20230519230834.27436-1-sagar.biradar@microchip.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-31scsi: stex: Fix gcc 13 warningsBart Van Assche1-0/+4
gcc 13 may assign another type to enumeration constants than gcc 12. Split the large enum at the top of source file stex.c such that the type of the constants used in time expressions is changed back to the same type chosen by gcc 12. This patch suppresses compiler warnings like this one: In file included from ./include/linux/bitops.h:7, from ./include/linux/kernel.h:22, from drivers/scsi/stex.c:13: drivers/scsi/stex.c: In function ‘stex_common_handshake’: ./include/linux/typecheck.h:12:25: error: comparison of distinct pointer types lacks a cast [-Werror] 12 | (void)(&__dummy == &__dummy2); \ | ^~ ./include/linux/jiffies.h:106:10: note: in expansion of macro ‘typecheck’ 106 | typecheck(unsigned long, b) && \ | ^~~~~~~~~ drivers/scsi/stex.c:1035:29: note: in expansion of macro ‘time_after’ 1035 | if (time_after(jiffies, before + MU_MAX_DELAY * HZ)) { | ^~~~~~~~~~ See also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107405. Cc: stable@vger.kernel.org Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230529195034.3077-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-23scsi: qla2xxx: Fix NULL pointer dereference in target modeGleb Chesnokov4-0/+10
When target mode is enabled, the pci_irq_get_affinity() function may return a NULL value in qla_mapq_init_qp_cpu_map() due to the qla24xx_enable_msix() code that handles IRQ settings for target mode. This leads to a crash due to a NULL pointer dereference. This patch fixes the issue by adding a check for the NULL value returned by pci_irq_get_affinity() and introducing a 'cpu_mapped' boolean flag to the qla_qpair structure, ensuring that the qpair's CPU affinity is updated when it has not been mapped to a CPU. Fixes: 1d201c81d4cc ("scsi: qla2xxx: Select qpair depending on which CPU post_cmd() gets called") Signed-off-by: Gleb Chesnokov <gleb.chesnokov@scst.dev> Link: https://lore.kernel.org/r/56b416f2-4e0f-b6cf-d6d5-b7c372e3c6a2@scst.dev Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-17scsi: core: Decrease scsi_device's iorequest_cnt if dispatch failedWenchao Hao1-0/+2
If scsi_dispatch_cmd() failed, the SCSI command was not sent to the target, scsi_queue_rq() would return BLK_STS_RESOURCE and the related request would be requeued. The timeout of this request would not fire, no one would increase iodone_cnt. The above flow would result the iodone_cnt smaller than iorequest_cnt. So decrease the iorequest_cnt if dispatch failed to workaround the issue. Signed-off-by: Wenchao Hao <haowenchao2@huawei.com> Reported-by: Ming Lei <ming.lei@redhat.com> Closes: https://lore.kernel.org/r/ZF+zB+bB7iqe0wGd@ovpn-8-17.pek2.redhat.com Link: https://lore.kernel.org/r/20230515070156.1790181-3-haowenchao2@huawei.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-17scsi: Revert "scsi: core: Do not increase scsi_device's iorequest_cnt if ↵Wenchao Hao1-1/+2
dispatch failed" The "atomic_inc(&cmd->device->iorequest_cnt)" in scsi_queue_rq() would cause kernel panic because cmd->device may be freed after returning from scsi_dispatch_cmd(). This reverts commit cfee29ffb45b1c9798011b19d454637d1b0fe87d. Signed-off-by: Wenchao Hao <haowenchao2@huawei.com> Reported-by: Ming Lei <ming.lei@redhat.com> Closes: https://lore.kernel.org/r/ZF+zB+bB7iqe0wGd@ovpn-8-17.pek2.redhat.com Link: https://lore.kernel.org/r/20230515070156.1790181-2-haowenchao2@huawei.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-17scsi: storvsc: Don't pass unused PFNs to Hyper-V hostMichael Kelley1-4/+4
In a SCSI request, storvsc pre-allocates space for up to MAX_PAGE_BUFFER_COUNT physical frame numbers to be passed to Hyper-V. If the size of the I/O request requires more PFNs, a separate memory area of exactly the correct size is dynamically allocated. But when the pre-allocated area is used, current code always passes MAX_PAGE_BUFFER_COUNT PFNs to Hyper-V, even if fewer are needed. While this doesn't break anything because the additional PFNs are always zero, more bytes than necessary are copied into the VMBus channel ring buffer. This takes CPU cycles and wastes space in the ring buffer. For a typical 4 Kbyte I/O that requires only a single PFN, 248 unnecessary bytes are copied. Fix this by setting the payload_sz based on the actual number of PFNs required, not the size of the pre-allocated space. Reported-by: John Starks <jostarks@microsoft.com> Fixes: 8f43710543ef ("scsi: storvsc: Support PAGE_SIZE larger than 4K") Signed-off-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1684171241-16209-1-git-send-email-mikelley@microsoft.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-06Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds6-847/+40
Pull more SCSI updates from James Bottomley: "Six late arriving patches for the merge window. Five are minor assorted fixes and updates. The IPR driver change removes SATA support, which will now allow a major cleanup in the ATA subsystem because it was the only driver still using the old attachment mechanism. The driver is only used on power systems and SATA was used to support a DVD device, which has long been moved to a different hba. IBM chose this route instead of porting ipr to the newer SATA interfaces" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedi: Fix use after free bug in qedi_remove() scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issue scsi: ipr: Remove several unused variables scsi: pm80xx: Log device registration scsi: ipr: Remove SATA support scsi: scsi_debug: Abort commands from scsi_debug_device_reset()
2023-04-28Merge tag 'sysctl-6.4-rc1' of ↵Linus Torvalds1-15/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "This only does a few sysctl moves from the kernel/sysctl.c file, the rest of the work has been put towards deprecating two API calls which incur recursion and prevent us from simplifying the registration process / saving memory per move. Most of the changes have been soaking on linux-next since v6.3-rc3. I've slowed down the kernel/sysctl.c moves due to Matthew Wilcox's feedback that we should see if we could *save* memory with these moves instead of incurring more memory. We currently incur more memory since when we move a syctl from kernel/sysclt.c out to its own file we end up having to add a new empty sysctl used to register it. To achieve saving memory we want to allow syctls to be passed without requiring the end element being empty, and just have our registration process rely on ARRAY_SIZE(). Without this, supporting both styles of sysctls would make the sysctl registration pretty brittle, hard to read and maintain as can be seen from Meng Tang's efforts to do just this [0]. Fortunately, in order to use ARRAY_SIZE() for all sysctl registrations also implies doing the work to deprecate two API calls which use recursion in order to support sysctl declarations with subdirectories. And so during this development cycle quite a bit of effort went into this deprecation effort. I've annotated the following two APIs are deprecated and in few kernel releases we should be good to remove them: - register_sysctl_table() - register_sysctl_paths() During this merge window we should be able to deprecate and unexport register_sysctl_paths(), we can probably do that towards the end of this merge window. Deprecating register_sysctl_table() will take a bit more time but this pull request goes with a few example of how to do this. As it turns out each of the conversions to move away from either of these two API calls *also* saves memory. And so long term, all these changes *will* prove to have saved a bit of memory on boot. The way I see it then is if remove a user of one deprecated call, it gives us enough savings to move one kernel/sysctl.c out from the generic arrays as we end up with about the same amount of bytes. Since deprecating register_sysctl_table() and register_sysctl_paths() does not require maintainer coordination except the final unexport you'll see quite a bit of these changes from other pull requests, I've just kept the stragglers after rc3" Link: https://lkml.kernel.org/r/ZAD+cpbrqlc5vmry@bombadil.infradead.org [0] * tag 'sysctl-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (29 commits) fs: fix sysctls.c built mm: compaction: remove incorrect #ifdef checks mm: compaction: move compaction sysctl to its own file mm: memory-failure: Move memory failure sysctls to its own file arm: simplify two-level sysctl registration for ctl_isa_vars ia64: simplify one-level sysctl registration for kdump_ctl_table utsname: simplify one-level sysctl registration for uts_kern_table ntfs: simplfy one-level sysctl registration for ntfs_sysctls coda: simplify one-level sysctl registration for coda_table fs/cachefiles: simplify one-level sysctl registration for cachefiles_sysctls xfs: simplify two-level sysctl registration for xfs_table nfs: simplify two-level sysctl registration for nfs_cb_sysctls nfs: simplify two-level sysctl registration for nfs4_cb_sysctls lockd: simplify two-level sysctl registration for nlm_sysctls proc_sysctl: enhance documentation xen: simplify sysctl registration for balloon md: simplify sysctl registration hv: simplify sysctl registration scsi: simplify sysctl registration with register_sysctl() csky: simplify alignment sysctl registration ...
2023-04-28Merge tag 'modules-6.4-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module updates from Luis Chamberlain: "The summary of the changes for this pull requests is: - Song Liu's new struct module_memory replacement - Nick Alcock's MODULE_LICENSE() removal for non-modules - My cleanups and enhancements to reduce the areas where we vmalloc module memory for duplicates, and the respective debug code which proves the remaining vmalloc pressure comes from userspace. Most of the changes have been in linux-next for quite some time except the minor fixes I made to check if a module was already loaded prior to allocating the final module memory with vmalloc and the respective debug code it introduces to help clarify the issue. Although the functional change is small it is rather safe as it can only *help* reduce vmalloc space for duplicates and is confirmed to fix a bootup issue with over 400 CPUs with KASAN enabled. I don't expect stable kernels to pick up that fix as the cleanups would have also had to have been picked up. Folks on larger CPU systems with modules will want to just upgrade if vmalloc space has been an issue on bootup. Given the size of this request, here's some more elaborate details: The functional change change in this pull request is the very first patch from Song Liu which replaces the 'struct module_layout' with a new 'struct module_memory'. The old data structure tried to put together all types of supported module memory types in one data structure, the new one abstracts the differences in memory types in a module to allow each one to provide their own set of details. This paves the way in the future so we can deal with them in a cleaner way. If you look at changes they also provide a nice cleanup of how we handle these different memory areas in a module. This change has been in linux-next since before the merge window opened for v6.3 so to provide more than a full kernel cycle of testing. It's a good thing as quite a bit of fixes have been found for it. Jason Baron then made dynamic debug a first class citizen module user by using module notifier callbacks to allocate / remove module specific dynamic debug information. Nick Alcock has done quite a bit of work cross-tree to remove module license tags from things which cannot possibly be module at my request so to: a) help him with his longer term tooling goals which require a deterministic evaluation if a piece a symbol code could ever be part of a module or not. But quite recently it is has been made clear that tooling is not the only one that would benefit. Disambiguating symbols also helps efforts such as live patching, kprobes and BPF, but for other reasons and R&D on this area is active with no clear solution in sight. b) help us inch closer to the now generally accepted long term goal of automating all the MODULE_LICENSE() tags from SPDX license tags In so far as a) is concerned, although module license tags are a no-op for non-modules, tools which would want create a mapping of possible modules can only rely on the module license tag after the commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"). Nick has been working on this *for years* and AFAICT I was the only one to suggest two alternatives to this approach for tooling. The complexity in one of my suggested approaches lies in that we'd need a possible-obj-m and a could-be-module which would check if the object being built is part of any kconfig build which could ever lead to it being part of a module, and if so define a new define -DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've suggested would be to have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as well but that means getting kconfig symbol names mapping to modules always, and I don't think that's the case today. I am not aware of Nick or anyone exploring either of these options. Quite recently Josh Poimboeuf has pointed out that live patching, kprobes and BPF would benefit from resolving some part of the disambiguation as well but for other reasons. The function granularity KASLR (fgkaslr) patches were mentioned but Joe Lawrence has clarified this effort has been dropped with no clear solution in sight [1]. In the meantime removing module license tags from code which could never be modules is welcomed for both objectives mentioned above. Some developers have also welcomed these changes as it has helped clarify when a module was never possible and they forgot to clean this up, and so you'll see quite a bit of Nick's patches in other pull requests for this merge window. I just picked up the stragglers after rc3. LWN has good coverage on the motivation behind this work [2] and the typical cross-tree issues he ran into along the way. The only concrete blocker issue he ran into was that we should not remove the MODULE_LICENSE() tags from files which have no SPDX tags yet, even if they can never be modules. Nick ended up giving up on his efforts due to having to do this vetting and backlash he ran into from folks who really did *not understand* the core of the issue nor were providing any alternative / guidance. I've gone through his changes and dropped the patches which dropped the module license tags where an SPDX license tag was missing, it only consisted of 11 drivers. To see if a pull request deals with a file which lacks SPDX tags you can just use: ./scripts/spdxcheck.py -f \ $(git diff --name-only commid-id | xargs echo) You'll see a core module file in this pull request for the above, but that's not related to his changes. WE just need to add the SPDX license tag for the kernel/module/kmod.c file in the future but it demonstrates the effectiveness of the script. Most of Nick's changes were spread out through different trees, and I just picked up the slack after rc3 for the last kernel was out. Those changes have been in linux-next for over two weeks. The cleanups, debug code I added and final fix I added for modules were motivated by David Hildenbrand's report of boot failing on a systems with over 400 CPUs when KASAN was enabled due to running out of virtual memory space. Although the functional change only consists of 3 lines in the patch "module: avoid allocation if module is already present and ready", proving that this was the best we can do on the modules side took quite a bit of effort and new debug code. The initial cleanups I did on the modules side of things has been in linux-next since around rc3 of the last kernel, the actual final fix for and debug code however have only been in linux-next for about a week or so but I think it is worth getting that code in for this merge window as it does help fix / prove / evaluate the issues reported with larger number of CPUs. Userspace is not yet fixed as it is taking a bit of time for folks to understand the crux of the issue and find a proper resolution. Worst come to worst, I have a kludge-of-concept [3] of how to make kernel_read*() calls for modules unique / converge them, but I'm currently inclined to just see if userspace can fix this instead" Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0] Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1] Link: https://lwn.net/Articles/927569/ [2] Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3] * tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits) module: add debugging auto-load duplicate module support module: stats: fix invalid_mod_bytes typo module: remove use of uninitialized variable len module: fix building stats for 32-bit targets module: stats: include uapi/linux/module.h module: avoid allocation if module is already present and ready module: add debug stats to help identify memory pressure module: extract patient module check into helper modules/kmod: replace implementation with a semaphore Change DEFINE_SEMAPHORE() to take a number argument module: fix kmemleak annotations for non init ELF sections module: Ignore L0 and rename is_arm_mapping_symbol() module: Move is_arm_mapping_symbol() to module_symbol.h module: Sync code of is_arm_mapping_symbol() scripts/gdb: use mem instead of core_layout to get the module address interconnect: remove module-related code interconnect: remove MODULE_LICENSE in non-modules zswap: remove MODULE_LICENSE in non-modules zpool: remove MODULE_LICENSE in non-modules x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules ...
2023-04-27Merge tag 'driver-core-6.4-rc1' of ↵Linus Torvalds8-21/+16
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...
2023-04-27Merge tag 'net-next-6.4' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the default value allows for better BIG TCP performances - Reduce compound page head access for zero-copy data transfers - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible - Threaded NAPI improvements, adding defer skb free support and unneeded softirq avoidance - Address dst_entry reference count scalability issues, via false sharing avoidance and optimize refcount tracking - Add lockless accesses annotation to sk_err[_soft] - Optimize again the skb struct layout - Extends the skb drop reasons to make it usable by multiple subsystems - Better const qualifier awareness for socket casts BPF: - Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses - Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward - Add more precise memory usage reporting for all BPF map types - Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params - Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton - Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps - Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps - Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree - Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them - Add ARM32 USDT support to libbpf - Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations Protocols: - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value indicates the provenance of the IP address - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition - Add the handshake upcall mechanism, allowing the user-space to implement generic TLS handshake on kernel's behalf - Bridge: support per-{Port, VLAN} neighbor suppression, increasing resilience to nodes failures - SCTP: add support for Fair Capacity and Weighted Fair Queueing schedulers - MPTCP: delay first subflow allocation up to its first usage. This will allow for later better LSM interaction - xfrm: Remove inner/outer modes from input/output path. These are not needed anymore - WiFi: - reduced neighbor report (RNR) handling for AP mode - HW timestamping support - support for randomized auth/deauth TA for PASN privacy - per-link debugfs for multi-link - TC offload support for mac80211 drivers - mac80211 mesh fast-xmit and fast-rx support - enable Wi-Fi 7 (EHT) mesh support Netfilter: - Add nf_tables 'brouting' support, to force a packet to be routed instead of being bridged - Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header. This is needed for BIT TCP support - The iptables 32bit compat interface isn't compiled in by default anymore - Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used - Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device Driver API: - Remove redundant Device Control Error Reporting Enable, as PCI core has already error reporting enabled at enumeration time - Move Multicast DB netlink handlers to core, allowing devices other then bridge to use them - Allow the page_pool to directly recycle the pages from safely localized NAPI - Implement lockless TX queue stop/wake combo macros, allowing for further code de-duplication and sanitization - Add YNL support for user headers and struct attrs - Add partial YNL specification for devlink - Add partial YNL specification for ethtool - Add tc-mqprio and tc-taprio support for preemptible traffic classes - Add tx push buf len param to ethtool, specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device - Add basic LED support for switch/phy - Add NAPI documentation, stop relaying on external links - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory work to make the hardware timestamping layer selectable by user space - Add transceiver support and improve the error messages for CAN-FD controllers New hardware / drivers: - Ethernet: - AMD/Pensando core device support - MediaTek MT7981 SoC - MediaTek MT7988 SoC - Broadcom BCM53134 embedded switch - Texas Instruments CPSW9G ethernet switch - Qualcomm EMAC3 DWMAC ethernet - StarFive JH7110 SoC - NXP CBTX ethernet PHY - WiFi: - Apple M1 Pro/Max devices - RealTek rtl8710bu/rtl8188gu - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset - Bluetooth: - Realtek RTL8821CS, RTL8851B, RTL8852BS - Mediatek MT7663, MT7922 - NXP w8997 - Actions Semi ATS2851 - QTI WCN6855 - Marvell 88W8997 - Can: - STMicroelectronics bxcan stm32f429 Drivers: - Ethernet NICs: - Intel (1G, icg): - add tracking and reporting of QBV config errors - add support for configuring max SDU for each Tx queue - Intel (100G, ice): - refactor mailbox overflow detection to support Scalable IOV - GNSS interface optimization - Intel (i40e): - support XDP multi-buffer - nVidia/Mellanox: - add the support for linux bridge multicast offload - enable TC offload for egress and engress MACVLAN over bond - add support for VxLAN GBP encap/decap flows offload - extend packet offload to fully support libreswan - support tunnel mode in mlx5 IPsec packet offload - extend XDP multi-buffer support - support MACsec VLAN offload - add support for dynamic msix vectors allocation - drop RX page_cache and fully use page_pool - implement thermal zone to report NIC temperature - Netronome/Corigine: - add support for multi-zone conntrack offload - Solarflare/Xilinx: - support offloading TC VLAN push/pop actions to the MAE - support TC decap rules - support unicast PTP - Other NICs: - Broadcom (bnxt): enforce software based freq adjustments only on shared PHC NIC - RealTek (r8169): refactor to addess ASPM issues during NAPI poll - Micrel (lan8841): add support for PTP_PF_PEROUT - Cadence (macb): enable PTP unicast - Engleder (tsnep): add XDP socket zero-copy support - virtio-net: implement exact header length guest feature - veth: add page_pool support for page recycling - vxlan: add MDB data path support - gve: add XDP support for GQI-QPL format - geneve: accept every ethertype - macvlan: allow some packets to bypass broadcast queue - mana: add support for jumbo frame - Ethernet high-speed switches: - Microchip (sparx5): Add support for TC flower templates - Ethernet embedded switches: - Broadcom (b54): - configure 6318 and 63268 RGMII ports - Marvell (mv88e6xxx): - faster C45 bus scan - Microchip: - lan966x: - add support for IS1 VCAP - better TX/RX from/to CPU performances - ksz9477: add ETS Qdisc support - ksz8: enhance static MAC table operations and error handling - sama7g5: add PTP capability - NXP (ocelot): - add support for external ports - add support for preemptible traffic classes - Texas Instruments: - add CPSWxG SGMII support for J7200 and J721E - Intel WiFi (iwlwifi): - preparation for Wi-Fi 7 EHT and multi-link support - EHT (Wi-Fi 7) sniffer support - hardware timestamping support for some devices/firwmares - TX beacon protection on newer hardware - Qualcomm 802.11ax WiFi (ath11k): - MU-MIMO parameters support - ack signal support for management packets - RealTek WiFi (rtw88): - SDIO bus support - better support for some SDIO devices (e.g. MAC address from efuse) - RealTek WiFi (rtw89): - HW scan support for 8852b - better support for 6 GHz scanning - support for various newer firmware APIs - framework firmware backwards compatibility - MediaTek WiFi (mt76): - P2P support - mesh A-MSDU support - EHT (Wi-Fi 7) support - coredump support" * tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits) net: phy: hide the PHYLIB_LEDS knob net: phy: marvell-88x2222: remove unnecessary (void*) conversions tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. net: amd: Fix link leak when verifying config failed net: phy: marvell: Fix inconsistent indenting in led_blink_set lan966x: Don't use xdp_frame when action is XDP_TX tsnep: Add XDP socket zero-copy TX support tsnep: Add XDP socket zero-copy RX support tsnep: Move skb receive action to separate function tsnep: Add functions for queue enable/disable tsnep: Rework TX/RX queue initialization tsnep: Replace modulo operation with mask net: phy: dp83867: Add led_brightness_set support net: phy: Fix reading LED reg property drivers: nfc: nfcsim: remove return value check of `dev_dir` net: phy: dp83867: Remove unnecessary (void*) conversions net: ethtool: coalesce: try to make user settings stick twice net: mana: Check if netdev/napi_alloc_frag returns single page net: mana: Rename mana_refill_rxoob and remove some empty lines net: veth: add page_pool stats ...
2023-04-27Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds144-1170/+1291
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target, mpi3mr, hisi_sas, arcmsr). The major core change is the constification of the host templates (which touches everything) along with other minor fixups and clean ups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits) scsi: ufs: mcq: Use pointer arithmetic in ufshcd_send_command() scsi: ufs: mcq: Annotate ufshcd_inc_sq_tail() appropriately scsi: cxlflash: s/semahpore/semaphore/ scsi: lpfc: Silence an incorrect device output scsi: mpi3mr: Use IRQ save variants of spinlock to protect chain frame allocation scsi: scsi_debug: Fix missing error code in scsi_debug_init() scsi: hisi_sas: Work around build failure in suspend function scsi: lpfc: Fix ioremap issues in lpfc_sli4_pci_mem_setup() scsi: mpt3sas: Fix an issue when driver is being removed scsi: mpt3sas: Remove HBA BIOS version in the kernel log scsi: target: core: Fix invalid memory access scsi: scsi_debug: Drop sdebug_queue scsi: scsi_debug: Only allow sdebug_max_queue be modified when no shosts scsi: scsi_debug: Use scsi_host_busy() in delay_store() and ndelay_store() scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in stop_all_queued() scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in sdebug_blk_mq_poll() scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd scsi: scsi_debug: Use scsi_block_requests() to block queues scsi: scsi_debug: Protect block_unblock_all_queues() with mutex scsi: scsi_debug: Change shost list lock to a mutex ...
2023-04-25scsi: qedi: Fix use after free bug in qedi_remove()Zheng Wang1-0/+3
In qedi_probe() we call __qedi_probe() which initializes &qedi->recovery_work with qedi_recovery_handler() and &qedi->board_disable_work with qedi_board_disable_work(). When qedi_schedule_recovery_handler() is called, schedule_delayed_work() will finally start the work. In qedi_remove(), which is called to remove the driver, the following sequence may be observed: Fix this by finishing the work before cleanup in qedi_remove(). CPU0 CPU1 |qedi_recovery_handler qedi_remove | __qedi_remove | iscsi_host_free | scsi_host_put | //free shost | |iscsi_host_for_each_session |//use qedi->shost Cancel recovery_work and board_disable_work in __qedi_remove(). Fixes: 4b1068f5d74b ("scsi: qedi: Add MFW error recovery process") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Link: https://lore.kernel.org/r/20230413033422.28003-1-zyytlz.wz@163.com Acked-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-25scsi: ipr: Remove several unused variablesTom Rix1-14/+0
gcc with W=1 reports drivers/scsi/ipr.c: In function ‘ipr_init_res_entry’: drivers/scsi/ipr.c:1104:22: error: variable ‘proto’ set but not used [-Werror=unused-but-set-variable] 1104 | unsigned int proto; | ^~~~~ drivers/scsi/ipr.c: In function ‘ipr_update_res_entry’: drivers/scsi/ipr.c:1261:22: error: variable ‘proto’ set but not used [-Werror=unused-but-set-variable] 1261 | unsigned int proto; | ^~~~~ drivers/scsi/ipr.c: In function ‘ipr_change_queue_depth’: drivers/scsi/ipr.c:4417:36: error: variable ‘res’ set but not used [-Werror=unused-but-set-variable] 4417 | struct ipr_resource_entry *res; | ^~~ These variables are not used, so remove them. The lock around res is not needed so remove that. This makes ioa_cfg and lock_flags unneeded so remove them as well. Fixes: 65a15d6560df ("scsi: ipr: Remove SATA support") Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230420125035.3888188-1-trix@redhat.com Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-25scsi: pm80xx: Log device registrationAkshat Jain1-3/+4
Log combination of phy_id and device_id in device registration response. Signed-off-by: Akshat Jain <akshatzen@google.com> Signed-off-by: Pranav Prasad <pranavpp@google.com> Link: https://lore.kernel.org/r/20230411230650.1760757-1-pranavpp@google.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-12/+8
Adjacent changes: net/mptcp/protocol.h 63740448a32e ("mptcp: fix accept vs worker race") 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close") ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19scsi: ipr: Remove SATA supportBrian King3-830/+11
Linux SATA support in ipr has always been limited to SATA DVDs. The last systems that had the option of including a SATA DVD was Power 8, which have been withdrawn for some time now, so this support can be removed. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/20230412174015.114764-1-brking@linux.vnet.ibm.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-19scsi: scsi_debug: Abort commands from scsi_debug_device_reset()John Garry1-0/+22
Currently scsi_debug_device_reset() does not do much apart from setting the SDEBUG_UA_POR ("Power on, reset, or bus device reset") flag, which is eventually passed back to the SCSI midlayer later for a "unit attention" command. There is a report that blktest scsi/007 test fails due to commit 1107c7b24ee3 ("scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd"). The problem there is that there are dangling scsi_debug queued commands when we attempt to remove the driver. scsi/007 test triggers SCSI EH and attempts to abort a timed-out command. Function scsi_debug_device_reset() is called as part of the EH, but does not deal with outstanding erroneous command. Prior to the named commit, removing the driver caused all dangling queued commands to be stopped - this should have not been necessary. Fix by aborting outstanding commands on a scsi_device basis from scsi_debug_device_reset(). Fixes: 1107c7b24ee3 ("scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd") Reported-by: kernel test robot <yujie.liu@intel.com> Link: https://lore.kernel.org/oe-lkp/202304071111.e762fcbd-yujie.liu@intel.com Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20230416175654.159163-1-john.g.garry@oracle.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-18Change DEFINE_SEMAPHORE() to take a number argumentPeter Zijlstra1-1/+1
Fundamentally semaphores are a counted primitive, but DEFINE_SEMAPHORE() does not expose this and explicitly creates a binary semaphore. Change DEFINE_SEMAPHORE() to take a number argument and use that in the few places that open-coded it using __SEMAPHORE_INITIALIZER(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> [mcgrof: add some tribal knowledge about why some folks prefer binary sempahores over mutexes] Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-04-15Merge tag 'scsi-fixes' of ↵Linus Torvalds1-12/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One small fix to SCSI Enclosure Services to fix a regression caused by another recent fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ses: Handle enclosure with just a primary component gracefully
2023-04-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-3/+3
Conflicts: tools/testing/selftests/net/config 62199e3f1658 ("selftests: net: Add VXLAN MDB test") 3a0385be133e ("selftests: add the missing CONFIG_IP_SCTP in net config") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13scsi: simplify sysctl registration with register_sysctl()Luis Chamberlain1-15/+1
register_sysctl_table() is a deprecated compatibility wrapper. register_sysctl() can do the directory creation for you so just use that. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-04-12scsi: cxlflash: s/semahpore/semaphore/Geert Uytterhoeven2-2/+2
Fix misspellings of "semaphore". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/d7d04004b818d7ab5d62002f286b0a1b0b493193.1681208251.git.geert+renesas@glider.be Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-12scsi: lpfc: Silence an incorrect device outputJun Chen1-0/+1
In lpfc_sli4_pci_mem_unset(), case LPFC_SLI_INTF_IF_TYPE_1 does not have a break statement, resulting in an incorrect device output. Fix this by adding a break statement before the default option. Signed-off-by: Jun Chen <jun_c@hust.edu.cn> Link: https://lore.kernel.org/r/20230410023724.3209455-1-jun_c@hust.edu.cn Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 02:50:27 +0300