summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: remove UINTAlexey Dobriyan1-8/+7
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: remove USHORTAlexey Dobriyan1-59/+58
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: remove UCHARAlexey Dobriyan1-339/+338
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: remove trivial wrappersAlexey Dobriyan1-35/+19
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: remove unused thingsAlexey Dobriyan1-344/+1
* Remove unused #define's * Remove unused typedefs. * Remove prototypes for non-existing functions. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] MODULE_ALIAS_{BLOCK,CHAR}DEV_MAJOR for drivers/scsiRene Herman6-6/+30
Add device-major aliases in drivers/scsi, allowing kmod autoload: MODULE_ALIAS_CHARDEV_MAJOR(SCSI_CHANGER_MAJOR) MODULE_ALIAS_CHARDEV_MAJOR(OSST_MAJOR) MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR) MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_CDROM_MAJOR) MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISKN_MAJOR) Signed-off-by: Andrew Morton <akpm@osdl.org> Acked-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] aic79xx: Avoid renegotiation on inquiryHannes Reinecke1-24/+0
Because of some quirk in the SCSI spec the aic79xx driver chose to force a renegotiation when sending an inquiry. This should better be handled by the upper layers if required at all. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] aic79xx: use BIOS settingsHannes Reinecke1-7/+28
This patch fixes the aic79xx driver to properly respond to BIOS settings. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] aic79xx: Invalid Sequencer interrupt occuredHannes Reinecke1-2/+6
On certain systems the driver seems to hit upon some "scsi0: Invalid Sequencer interrupt occurred." problem and dumps card state. According to Adaptec engineers this message is harmless. So as not to confuse user we can as well disable the internal card state dump and just print out the message itself. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] aic79xx: Update error recoveryHannes Reinecke1-124/+201
This patch updates the error recovery. Routines for TARGET RESET and ABORT COMMAND are split up as the logic is quite dissimilar. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] aic79xx: Remove dead codeHannes Reinecke3-62/+0
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] aic79xx: use tcq functionsHannes Reinecke1-9/+5
This patch converts aic79xx to use the midlayer-supplied tcq functions. We also set the queuedepth to '1' if tcq is disabled; the aic79xx driver gets confused otherwise. Will set it back to '2' once I figure out how to queue requests in the driver. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] aic79xx: remove qfrozenHannes Reinecke2-82/+27
This patch removes the need for platform_data->qfrozen. We're now using complete() instead of semaphores thus simplifying ahd_freeze_simq() quite a lot. This also fixes some deadlocks in the recovery code (again). Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Change version number to 8.1.4James Smart1-1/+1
Change version number to 8.1.4 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Two misc fixesJames Smart2-1/+3
Two misc fixes: - Fix deadlock caused by return with host_lock held in lpfc_findnode_did - Initialize all fields of the allocated mail box structure to zero. Was causing some sysfs mailbox commands to fail immediately after load. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Introduce lpfc_reset_barrier() function for resets on ↵James Smart5-9/+100
dual channel adapters Introduce lpfc_reset_barrier() function for resets on dual channel adapters Workaround for a hardware errata on dual channel asics. There is a potential for the chip to lock up on a reset if a shared dma engine is in use. The (ugly) work around requires a reset process which uses a mailbox command to synchronize the independent channels prior to the reset to avoid the issue. Unfortunately, the timing windows required to ensure this workaround succeeds are very specific, meaning we can't release the cpu during the barrier. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Fixed a timer panic due to timer firing after freeing ndlpJames Smart2-0/+15
Fixed a timer panic due to timer firing after freeing ndlp Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Fixed RSCN handling when a PLOGI is in retryJames Smart4-45/+52
Fixed RSCN handling when a PLOGI is in retry. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Fix Discovery processing for NPorts that change their ↵James Smart4-94/+204
NPortId on the fly Fix Discovery processing for NPorts that change their NPortId on the fly due to a cable swap. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] wd33c93: Fix missing prototypes by including <linux/interrupt.h>.Ralf Baechle1-1/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-10[SCSI] add missing transport_container_unregister in sas classJames Bottomley1-0/+1
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-07[SCSI] sr: partial revert of 24669f75a3231fa37444977c92d1f4838bec1233James Bottomley1-2/+4
The patch [SCSI] SCSI core kmalloc2kzalloc Has an incorrect piece in sr_ioctl.c; it changes buffer from kmalloc to kzalloc, but then removes the clearing of the stack variable struct packet_command. This, in turn leaves rubbish in the sense pointer which the sr_do_ioctl() command then happily writes to ... oops. Thanks to Mike Christie <michaelc@cs.wisc.edu> for spotting this. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-07[SCSI] osst: changes required to move forward to block requestWillem Riede2-225/+290
On 02/07/2006 04:12:55 AM, Christoph Hellwig wrote: > On Mon, Feb 06, 2006 at 08:02:21PM -0500, Willem Riede wrote: > > > But I will certainly help retire scsi_request. And anything else that is > > needed to keep up with proper kernel style. Let me know what those are, if > > you would? I'll start looking at how st has changed, and will be back with > > any questions I may have. > > right now the above is the most urgent bit. What would be nice but not > required is a conversion to the sense handling helpers, similar to what > st got (aka using the *normalize_sense functions and then dealing with the > parsed sense buffer instead of the raw sense data) Ok, so here is my first take at satisfying this request. Be warned, that beyond compiling, and checking that the new module doesn't immediately blow up, there hasn't yet been a lot of testing. But this should allow you to comment on the changes, and move forward with dropping scsi_request from the kernel code. Signed-off-by: Willem Riede <osst@riede.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[SCSI] lpfc: minor syntax fixesJames Bottomley2-1/+6
Stop gcc complaining about undefined variables Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Change version number to 8.1.3Jamie Wellnitz1-1/+1
Change version number to 8.1.3 Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Fix polling mode panicJamie Wellnitz2-6/+16
Fix polling mode panic Cause: Race between interrupt driven and polling path in harvesting iocbs from the response ring. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Protect NPL lists with host lockJamie Wellnitz2-30/+26
Protect NPL lists with host lock Symptoms: lpfc_findnode_rpi and lpfc_findnode_did can be called outside of the discovery thread context. We have to iterate through the NPL lists under the host lock and all add/del operations on those lists have to be done under host lock. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Fix deadlock in lpfc_fdmi_tmo_handlerJamie Wellnitz1-6/+0
Fix deadlock in lpfc_fdmi_tmo_handler lpfc_fdmi_tmo_handler was calling lpfc_fdmi_cmd with the host_lock held. lpfc_fdmi_cmd assumes the host_lock is released as it calls functions that acquire the host_lock. lpfc_fdmi_tmo_handler acquired the host_lock to protect access to work_hba_events. This was already checked in the worker thread so we can remove that code completely and remove access to the host_lock. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Fix performance when using multiple SLI ringsJamie Wellnitz3-3/+50
Fix performance when using multiple SLI rings Currently the driver allocates all of its SLI command and response ring entries to one primary ring. Other rings get little, or no, resources. Allow more resources to be given to ring 1 Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Remove unused MBhostaddr from lpfc_sli structureJamie Wellnitz1-3/+1
Remove unused MBhostaddr from lpfc_sli structure Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: PCI hrd_type should be obtained with ↵Jamie Wellnitz1-2/+4
pci_read_config_byte() macro PCI hrd_type should be obtained with pci_read_config_byte() macro Driver keys off of this field to report the proper adapter type. The pci subsystem explicitly clears the multiport bit in the copy of the field given the driver. Thus, to properly name the card, obtain it from config space. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Derive supported speeds from LMT field in the READ_CONFIGJamie Wellnitz3-94/+126
Derive supported speeds from LMT field in the READ_CONFIG Driver was keying off internal cores. Use what the firmware reports instead. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] convert aic94xx over to using the sas transport end deviceJames Bottomley1-34/+165
Begin introducing the concept of sas remote devices that have an rphy embedded. The first one (this) is a simple end device. All that an end device really does is have port mode page parameters contained. The next and more complex piece will be expander remote devices. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-03[SCSI] make some sas class properties optionalJames Bottomley1-5/+31
aic94xx doesn't have a use for the bay or enclosure identifiers. Also, I think it's not going to need a get_linkerrors(), so wire up all of these exported properties as conditional on the underlying function support. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-03[SCSI] qla2xxx: use kthread_ APIChristoph Hellwig6-74/+38
Use the kthread_ API instead of opencoding lots of hairy code for kernel thread creation and teardown. Also switch from semaphore-based thread wakeup to wake_up_process. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-By: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-03[SCSI] add 6.0 Gbit phy definitions to the sas transport classJames Bottomley1-0/+1
I don't think these exist in silicon yet, but the aic94xx driver has a register setting for them. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01[SCSI] lpfc 8.1.2: Change version number to 8.1.2Jamie Wellnitz1-3/+3
Change version number to 8.1.2 Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01[SCSI] lpfc 8.1.2: Modify RSCN handling to unregister rpis on lost ↵Jamie Wellnitz1-1/+30
FCP_TARGETs immediately Modify RSCN handling to unregister rpis on lost FCP_TARGETs immediately Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01[SCSI] lpfc 8.1.2: Fix panic caused by HBA resets and target side cable pullsJamie Wellnitz1-3/+3
Fix panic caused by HBA resets and target side cable pulls Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01[SCSI] lpfc 8.1.2: Fixed module parameter descriptions.Jamie Wellnitz1-3/+3
Fixed module parameter descriptions. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01[SCSI] lpfc 8.1.2: Code cleanup of lpfc_mbx_cmpl_config_linkJamie Wellnitz1-64/+43
Code cleanup of lpfc_mbx_cmpl_config_link Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01[SCSI] lpfc 8.1.2: Allow turning on internal loop-back modeJamie Wellnitz2-1/+5
Allow turning on internal loop-back mode Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01[SCSI] lpfc 8.1.2: Code style changes for Discovery codeJamie Wellnitz4-95/+74
Code style changes for Discovery code Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01[SCSI] lpfc 8.1.2: Make lpfc_els_rsp_rps_acc and lpfc_els_rsp_rpl_acc staticJamie Wellnitz1-2/+2
Make lpfc_els_rsp_rps_acc and lpfc_els_rsp_rpl_acc static Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01[SCSI] lpfc 8.1.2: Added support for FANJamie Wellnitz4-58/+140
Added support for FAN Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01[SCSI] lpfc 8.1.2: Add ERROR and WARM_START modes for diagnostic purposes.Jamie Wellnitz9-152/+390
Add ERROR and WARM_START modes for diagnostic purposes. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01[SCSI] lpfc 8.1.2: Remove hba_list from struct lpfc_hbaJamie Wellnitz1-1/+0
Remove hba_list from struct lpfc_hba Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01[SCSI] lpfc 8.1.2: Correct use of the hostdata field in scsi_hostJamie Wellnitz3-41/+40
Correct use of the hostdata field in scsi_host Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01[SCSI] lpfc 8.1.2: Misc FC Discovery changes :Jamie Wellnitz5-393/+452
Misc FC Discovery changes : - Added FC_BYPASSED_MODE statistic - Corrected some log message data - Fix up Discovery infrastructure to support FAN: Allow Fabric entities to flow thru DSM Fix up linkup/linkdown unregister login processing for Fabric entities Clean up Discovery code Utilize nodev_tmo for Fabric entities - Use of 3 * ratov for CT handling timeouts - Fix up DSM to make more appropriate decisions and clean up code. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01[SCSI] lpfc 8.1.2: Add module parameter to limit number of outstanding ↵Jamie Wellnitz1-0/+15
commands per lpfc HBA Add module parameter to limit number of outstanding commands per lpfc HBA Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 10:36:57 +0300