summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2017-04-15Merge tag 'scsi-fixes' of ↵Linus Torvalds8-12/+49
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is seven small fixes which are all for user visible issues that fortunately only occur in rare circumstances. The most serious is the sr one in which QEMU can cause us to read beyond the end of a buffer (I don't think it's exploitable, but just in case). The next is the sd capacity fix which means all non 512 byte sector drives greater than 2TB fail to be correctly sized. The rest are either in new drivers (qedf) or on error legs" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ipr: do not set DID_PASSTHROUGH on CHECK CONDITION scsi: aacraid: fix PCI error recovery path scsi: sd: Fix capacity calculation with 32-bit sector_t scsi: qla2xxx: Add fix to read correct register value for ISP82xx. scsi: qedf: Fix crash due to unsolicited FIP VLAN response. scsi: sr: Sanity check returned mode data scsi: sd: Consider max_xfer_blocks if opt_xfer_blocks is unusable
2017-04-12Merge remote-tracking branch 'mkp-scsi/4.11/scsi-fixes' into fixesJames Bottomley8-12/+49
2017-04-12scsi: ipr: do not set DID_PASSTHROUGH on CHECK CONDITIONMauricio Faria de Oliveira1-1/+6
On a dual controller setup with multipath enabled, some MEDIUM ERRORs caused both paths to be failed, thus I/O got queued/blocked since the 'queue_if_no_path' feature is enabled by default on IPR controllers. This example disabled 'queue_if_no_path' so the I/O failure is seen at the sg_dd program. Notice that after the sg_dd test-case, both paths are in 'failed' state, and both path/priority groups are in 'enabled' state (not 'active') -- which would block I/O with 'queue_if_no_path'. # sg_dd if=/dev/dm-2 bs=4096 count=1 dio=1 verbose=4 blk_sgio=0 <...> read(unix): count=4096, res=-1 sg_dd: reading, skip=0 : Input/output error <...> # dmesg [...] sd 2:2:16:0: [sds] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [...] sd 2:2:16:0: [sds] Sense Key : Medium Error [current] [...] sd 2:2:16:0: [sds] Add. Sense: Unrecovered read error - recommend rewrite the data [...] sd 2:2:16:0: [sds] CDB: Read(10) 28 00 00 00 00 00 00 00 20 00 [...] blk_update_request: I/O error, dev sds, sector 0 [...] device-mapper: multipath: Failing path 65:32. <...> [...] device-mapper: multipath: Failing path 65:224. # multipath -l 1IBM_IPR-0_59C2AE0000001F80 dm-2 IBM ,IPR-0 59C2AE00 size=5.2T features='0' hwhandler='1 alua' wp=rw |-+- policy='service-time 0' prio=0 status=enabled | `- 2:2:16:0 sds 65:32 failed undef running `-+- policy='service-time 0' prio=0 status=enabled `- 1:2:7:0 sdae 65:224 failed undef running This is not the desired behavior. The dm-multipath explicitly checks for the MEDIUM ERROR case (and a few others) so not to fail the path (e.g., I/O to other sectors could potentially happen without problems). See dm-mpath.c :: do_end_io_bio() -> noretry_error() !->! fail_path(). The problem trace is: 1) ipr_scsi_done() // SENSE KEY/CHECK CONDITION detected, go to.. 2) ipr_erp_start() // ipr_is_gscsi() and masked_ioasc OK, go to.. 3) ipr_gen_sense() // masked_ioasc is IPR_IOASC_MED_DO_NOT_REALLOC, // so set DID_PASSTHROUGH. 4) scsi_decide_disposition() // check for DID_PASSTHROUGH and return // early on, faking a DID_OK.. *instead* // of reaching scsi_check_sense(). // Had it reached the latter, that would // set host_byte to DID_MEDIUM_ERROR. 5) scsi_finish_command() 6) scsi_io_completion() 7) __scsi_error_from_host_byte() // That would be converted to -ENODATA <...> 8) dm_softirq_done() 9) multipath_end_io() 10) do_end_io() 11) noretry_error() // And that is checked in dm-mpath :: noretry_error() // which would cause fail_path() not to be called. With this patch applied, the I/O is failed but the paths are not. This multipath device continues accepting more I/O requests without blocking. (and notice the different host byte/driver byte handling per SCSI layer). # dmesg [...] sd 2:2:7:0: [sdaf] Done: SUCCESS Result: hostbyte=0x13 driverbyte=DRIVER_OK [...] sd 2:2:7:0: [sdaf] CDB: Read(10) 28 00 00 00 00 00 00 00 40 00 [...] sd 2:2:7:0: [sdaf] Sense Key : Medium Error [current] [...] sd 2:2:7:0: [sdaf] Add. Sense: Unrecovered read error - recommend rewrite the data [...] blk_update_request: critical medium error, dev sdaf, sector 0 [...] blk_update_request: critical medium error, dev dm-6, sector 0 [...] sd 2:2:7:0: [sdaf] Done: SUCCESS Result: hostbyte=0x13 driverbyte=DRIVER_OK [...] sd 2:2:7:0: [sdaf] CDB: Read(10) 28 00 00 00 00 00 00 00 10 00 [...] sd 2:2:7:0: [sdaf] Sense Key : Medium Error [current] [...] sd 2:2:7:0: [sdaf] Add. Sense: Unrecovered read error - recommend rewrite the data [...] blk_update_request: critical medium error, dev sdaf, sector 0 [...] blk_update_request: critical medium error, dev dm-6, sector 0 [...] Buffer I/O error on dev dm-6, logical block 0, async page read # multipath -l 1IBM_IPR-0_59C2AE0000001F80 1IBM_IPR-0_59C2AE0000001F80 dm-6 IBM ,IPR-0 59C2AE00 size=5.2T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw |-+- policy='service-time 0' prio=0 status=active | `- 2:2:7:0 sdaf 65:240 active undef running `-+- policy='service-time 0' prio=0 status=enabled `- 1:2:7:0 sdh 8:112 active undef running Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-12scsi: aacraid: fix PCI error recovery pathGuilherme G. Piccoli2-4/+10
During a PCI error recovery, if aac_check_health() is not aware that a PCI error happened and we have an offline PCI channel, it might trigger some errors (like NULL pointer dereference) and inhibit the error recovery process to complete. This patch makes the health check procedure aware of PCI channel issues, and in case of error recovery process, the function aac_adapter_check_health() returns -1 and let the recovery process to complete successfully. This patch was tested on upstream kernel v4.11-rc5 in PowerPC ppc64le architecture with adapter 9005:028d (VID:DID) - the error recovery procedure was able to recover fine. Fixes: 5c63f7f710bd ("aacraid: Added EEH support") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-08Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-3/+3
Pull block fixes from Jens Axboe: "Here's a pull request for 4.11-rc, fixing a set of issues mostly centered around the new scheduling framework. These have been brewing for a while, but split up into what we absolutely need in 4.11, and what we can defer until 4.12. These are well tested, on both single queue and multiqueue setups, and with and without shared tags. They fix several hangs that have happened in testing. This is obviously larger than I would have preferred at this point in time, but I don't think we can shave much off this and still get the desired results. In detail, this pull request contains: - a set of five fixes for NVMe, mostly from Christoph and one from Roland. - a series from Bart, fixing issues with dm-mq and SCSI shared tags and scheduling. Note that one of those patches commit messages may read like an optimization, but it is in fact an important fix for queue restarts in particular. - a series from Omar, most importantly fixing a hang with multiple hardware queues when we fail to get a driver tag. Another important fix in there is for resizing hardware queues, which nbd does when handling multiple sockets for one connection. - fixing an imbalance in putting the ctx for hctx request allocations from Minchan" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: Restart a single queue if tag sets are shared dm rq: Avoid that request processing stalls sporadically scsi: Avoid that SCSI queues get stuck blk-mq: Introduce blk_mq_delay_run_hw_queue() blk-mq: remap queues when adding/removing hardware queues blk-mq-sched: fix crash in switch error path blk-mq-sched: set up scheduler tags when bringing up new queues blk-mq-sched: refactor scheduler initialization blk-mq: use the right hctx when getting a driver tag fails nvmet: fix byte swap in nvmet_parse_io_cmd nvmet: fix byte swap in nvmet_execute_write_zeroes nvmet: add missing byte swap in nvmet_get_smart_log nvme: add missing byte swap in nvme_setup_discard nvme: Correct NVMF enum values to match NVMe-oF rev 1.0 block: do not put mq context in blk_mq_alloc_request_hctx
2017-04-08scsi: sd: Fix capacity calculation with 32-bit sector_tMartin K. Petersen1-2/+18
We previously made sure that the reported disk capacity was less than 0xffffffff blocks when the kernel was not compiled with large sector_t support (CONFIG_LBDAF). However, this check assumed that the capacity was reported in units of 512 bytes. Add a sanity check function to ensure that we only enable disks if the entire reported capacity can be expressed in terms of sector_t. Cc: <stable@vger.kernel.org> Reported-by: Steve Magnani <steve.magnani@digidescorp.com> Cc: Bart Van Assche <Bart.VanAssche@sandisk.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-08scsi: qla2xxx: Add fix to read correct register value for ISP82xx.Sawan Chandak1-1/+6
Add fix to read correct register value for ISP82xx, during check for register disconnect.ISP82xx has different base register. Fixes: a465537ad1a4 ("qla2xxx: Disable the adapter and skip error recovery in case of register disconnect") Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Cc: <stable@vger.kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-08scsi: qedf: Fix crash due to unsolicited FIP VLAN response.Chad Dupuis2-1/+3
We need to initialize qedf->fipvlan_compl in __qedf_probe so that if we receive an unsolicited FIP VLAN response, the system doesn't crash due to trying to complete an uninitialized completion. Also add a check to see if there are any waiters on the completion so we don't inadvertantly kick start the discovery process due to the unsolicited frame. Fixed the crash: <1>BUG: unable to handle kernel NULL pointer dereference at (null) <1>IP: [<ffffffff8105ed71>] __wake_up_common+0x31/0x90 <4>PGD 0 <4>Oops: 0000 [#1] SMP <4>last sysfs file: /sys/devices/system/cpu/online <4>CPU 7 <4>Modules linked in: autofs4 nfs lockd fscache auth_rpcgss nfs_acl sunrpc target_core_iblock target_core_file target_core_pscsi target_core_mod configfs bnx2fc cnic fcoe 8021q garp stp llc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 vfat fat uinput ipmi_devintf microcode power_meter acpi_ipmi ipmi_si ipmi_msghandler iTCO_wdt iTCO_vendor_support dcdbas sg joydev sb_edac edac_core lpc_ich mfd_core shpchp tg3 ptp pps_core ext4 jbd2 mbcache sr_mod cdrom sd_mod crc_t10dif qedi(U) iscsi_boot_sysfs libiscsi scsi_transport_iscsi uio qedf(U) libfcoe libfc scsi_transport_fc scsi_tgt qede(U) qed(U) ahci megaraid_sas wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: speedstep_lib] <4> <4>Pid: 1485, comm: qedf_11_ll2 Not tainted 2.6.32-642.el6.x86_64 #1 Dell Inc. PowerEdge R730/0599V5 <4>RIP: 0010:[<ffffffff8105ed71>] [<ffffffff8105ed71>] __wake_up_common+0x31/0x90 <4>RSP: 0018:ffff881068a83d50 EFLAGS: 00010086 <4>RAX: ffffffffffffffe8 RBX: ffff88106bf42de0 RCX: 0000000000000000 <4>RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffff88106bf42de0 <4>RBP: ffff881068a83d90 R08: 0000000000000000 R09: 00000000fffffffe <4>R10: 0000000000000000 R11: 000000000000000b R12: 0000000000000286 <4>R13: ffff88106bf42de8 R14: 0000000000000000 R15: 0000000000000000 <4>FS: 0000000000000000(0000) GS:ffff88089c460000(0000) knlGS:0000000000000000 <4>CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <4>CR2: 0000000000000000 CR3: 0000000001a8d000 CR4: 00000000001407e0 <4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>Process qedf_11_ll2 (pid: 1485, threadinfo ffff881068a80000, task ffff881068a70040) <4>Stack: <4> ffff88106ef00090 0000000300000001 ffff881068a83d90 ffff88106bf42de0 <4><d> 0000000000000286 ffff88106bf42dd8 ffff88106bf40a50 0000000000000002 <4><d> ffff881068a83dc0 ffffffff810634c7 ffff881000000003 000000000000000b <4>Call Trace: <4> [<ffffffff810634c7>] complete+0x47/0x60 <4> [<ffffffffa01d37e7>] qedf_fip_recv+0x1c7/0x450 [qedf] <4> [<ffffffffa01cb3cb>] qedf_ll2_recv_thread+0x33b/0x510 [qedf] <4> [<ffffffffa01cb090>] ? qedf_ll2_recv_thread+0x0/0x510 [qedf] <4> [<ffffffff810a662e>] kthread+0x9e/0xc0 <4> [<ffffffff8100c28a>] child_rip+0xa/0x20 <4> [<ffffffff810a6590>] ? kthread+0x0/0xc0 <4> [<ffffffff8100c280>] ? child_rip+0x0/0x20 <4>Code: 41 56 41 55 41 54 53 48 83 ec 18 0f 1f 44 00 00 89 75 cc 89 55 c8 4c 8d 6f 08 48 8b 57 08 41 89 cf 4d 89 c6 48 8d 42 e8 49 39 d5 <48> 8b 58 18 74 3f 48 83 eb 18 eb 0a 0f 1f 00 48 89 d8 48 8d 5a <1>RIP [<ffffffff8105ed71>] __wake_up_common+0x31/0x90 <4> RSP <ffff881068a83d50> <4>CR2: 0000000000000000 Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-08scsi: sr: Sanity check returned mode dataMartin K. Petersen1-2/+4
Kefeng Wang discovered that old versions of the QEMU CD driver would return mangled mode data causing us to walk off the end of the buffer in an attempt to parse it. Sanity check the returned mode sense data. Cc: <stable@vger.kernel.org> Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-08scsi: sd: Consider max_xfer_blocks if opt_xfer_blocks is unusableFam Zheng1-1/+2
If device reports a small max_xfer_blocks and a zero opt_xfer_blocks, we end up using BLK_DEF_MAX_SECTORS, which is wrong and r/w of that size may get error. [mkp: tweaked to avoid setting rw_max twice and added typecast] Cc: <stable@vger.kernel.org> # v4.4+ Fixes: ca369d51b3e ("block/sd: Fix device-imposed transfer length limits") Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-07scsi: Avoid that SCSI queues get stuckBart Van Assche1-3/+3
If a .queue_rq() function returns BLK_MQ_RQ_QUEUE_BUSY then the block driver that implements that function is responsible for rerunning the hardware queue once requests can be queued again successfully. commit 52d7f1b5c2f3 ("blk-mq: Avoid that requeueing starts stopped queues") removed the blk_mq_stop_hw_queue() call from scsi_queue_rq() for the BLK_MQ_RQ_QUEUE_BUSY case. Hence change all calls to functions that are intended to rerun a busy queue such that these examine all hardware queues instead of only stopped queues. Since no other functions than scsi_internal_device_block() and scsi_internal_device_unblock() should ever stop or restart a SCSI queue, change the blk_mq_delay_queue() call into a blk_mq_delay_run_hw_queue() call. Fixes: commit 52d7f1b5c2f3 ("blk-mq: Avoid that requeueing starts stopped queues") Fixes: commit 7e79dadce222 ("blk-mq: stop hardware queue in blk_mq_delay_queue()") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Long Li <longli@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-02Merge tag 'scsi-fixes' of ↵Linus Torvalds12-39/+57
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Thirteen small fixes: The hopefully final effort to get the lpfc nvme kconfig problems sorted, there's one important sg fix (user can induce read after end of buffer) and one minor enhancement (adding an extra PCI ID to qedi). The rest are a set of minor fixes, which mostly occur as user visible in error legs or on specific devices" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: remove the duplicated checking for supporting clkscaling scsi: lpfc: fix building without debugfs support scsi: lpfc: Fix PT2PT PRLI reject scsi: hpsa: fix volume offline state scsi: libsas: fix ata xfer length scsi: scsi_dh_alua: Warn if the first argument of alua_rtpg_queue() is NULL scsi: scsi_dh_alua: Ensure that alua_activate() calls the completion function scsi: scsi_dh_alua: Check scsi_device_get() return value scsi: sg: check length passed to SG_NEXT_CMD_LEN scsi: ufshcd-platform: remove the useless cast in ERR_PTR/IS_ERR scsi: qedi: Add PCI device-ID for QL41xxx adapters. scsi: aacraid: Fix potential null access scsi: qla2xxx: Fix crash in qla2xxx_eh_abort on bad ptr
2017-03-29Merge remote-tracking branch 'mkp-scsi/4.11/scsi-fixes' into fixesJames Bottomley12-39/+57
2017-03-28scsi: ufs: remove the duplicated checking for supporting clkscalingJaehoon Chung1-2/+0
There are same conditions for checking whether supporting clkscaling or not. When ufshcd is supporting clkscaling, active_reqs should be decreased by one. [mkp: addressed comment from Bartlomiej] Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-23scsi: lpfc: fix building without debugfs supportArnd Bergmann2-10/+16
On a randconfig build without CONFIG_SCSI_LPFC_DEBUG_FS, I ran into multiple compile failures: drivers/scsi/lpfc/lpfc_debugfs.h: In function 'lpfc_debug_dump_wq': drivers/scsi/lpfc/lpfc_debugfs.h:405:15: error: 'DUMP_FCP' undeclared (first use in this function); did you mean 'DUMP_VAR'? drivers/scsi/lpfc/lpfc_debugfs.h:405:15: note: each undeclared identifier is reported only once for each function it appears in drivers/scsi/lpfc/lpfc_debugfs.h:408:22: error: 'DUMP_NVME' undeclared (first use in this function); did you mean 'DUMP_NONE'? drivers/scsi/lpfc/lpfc_nvmet.c: In function 'lpfc_nvmet_xmt_ls_rsp_cmp': drivers/scsi/lpfc/lpfc_nvmet.c:109:2: error: implicit declaration of function 'lpfc_nvmeio_data'; did you mean 'lpfc_mem_free'? [-Werror=implicit-function-declaration] drivers/scsi/lpfc/lpfc_nvmet.c: In function 'lpfc_nvmet_xmt_fcp_op': drivers/scsi/lpfc/lpfc_nvmet.c:523:10: error: unused variable 'id' [-Werror=unused-variable] They are all trivial to fix, so I'm doing it in a combined patch here. Fixes: 1d9d5a9879ad ("scsi: lpfc: refactor debugfs queue dump routines") Fixes: bd2cdd5e400f ("scsi: lpfc: NVME Initiator: Add debugfs support") Fixes: 2b65e18202fd ("scsi: lpfc: NVME Target: Add debugfs support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-23scsi: lpfc: Fix PT2PT PRLI rejectDick Kennedy1-1/+2
lpfc cannot establish connection with targets that send PRLI in P2P configurations. If lpfc rejects a PRLI that is sent from a target the target will not resend and will reject the PRLI send from the initiator. [mkp: applied by hand] Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-23scsi: hpsa: fix volume offline stateTomas Henzl1-0/+1
In a previous patch a hpsa_scsi_dev_t.volume_offline update line has been removed, so let us put it back.. Fixes: 85b29008d8 (hpsa: update check for logical volume status) Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-21Merge tag 'scsi-fixes' of ↵Linus Torvalds12-55/+69
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Nine small fixes: the biggest is probably finally sorting out Kconfig issues with lpfc nvme. There are some performance fixes for megaraid and hpsa and a static checker fix" [ Johannes Thumshirn points out that there still seems to be more lpfc vs nvme config issues. Oh well. - Linus ] * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Finalize Kconfig options for nvme scsi: ufs: don't check unsigned type for a negative value scsi: hpsa: do not timeout reset operations scsi: hpsa: limit outstanding rescans scsi: hpsa: update check for logical volume status scsi: megaraid_sas: Driver version upgrade scsi: megaraid_sas: raid6 also require cpuSel check same as raid5 scsi: megaraid_sas: add correct return type check for ldio hint logic for raid1 scsi: megaraid_sas: enable intx only if msix request fails
2017-03-20scsi: libsas: fix ata xfer lengthJohn Garry1-1/+1
The total ata xfer length may not be calculated properly, in that we do not use the proper method to get an sg element dma length. According to the code comment, sg_dma_len() should be used after dma_map_sg() is called. This issue was found by turning on the SMMUv3 in front of the hisi_sas controller in hip07. Multiple sg elements were being combined into a single element, but the original first element length was being use as the total xfer length. Cc: <stable@vger.kernel.org> Fixes: ff2aeb1eb64c8a4770a6 ("libata: convert to chained sg") Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds16-432/+1077
Pull SCSI target fixes from Nicholas Bellinger: "The bulk of the changes are in qla2xxx target driver code to address various issues found during Cavium/QLogic's internal testing (stable CC's included), along with a few other stability and smaller miscellaneous improvements. There are also a couple of different patch sets from Mike Christie, which have been a result of his work to use target-core ALUA logic together with tcm-user backend driver. Finally, a patch to address some long standing issues with pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices, which will make folks using physical (or virtual) magnetic tape happy" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits) qla2xxx: Update driver version to 9.00.00.00-k qla2xxx: Fix delayed response to command for loop mode/direct connect. qla2xxx: Change scsi host lookup method. qla2xxx: Add DebugFS node to display Port Database qla2xxx: Use IOCB interface to submit non-critical MBX. qla2xxx: Add async new target notification qla2xxx: Export DIF stats via debugfs qla2xxx: Improve T10-DIF/PI handling in driver. qla2xxx: Allow relogin to proceed if remote login did not finish qla2xxx: Fix sess_lock & hardware_lock lock order problem. qla2xxx: Fix inadequate lock protection for ABTS. qla2xxx: Fix request queue corruption. qla2xxx: Fix memory leak for abts processing qla2xxx: Allow vref count to timeout on vport delete. tcmu: Convert cmd_time_out into backend device attribute tcmu: make cmd timeout configurable tcmu: add helper to check if dev was configured target: fix race during implicit transition work flushes target: allow userspace to set state to transitioning target: fix ALUA transition timeout handling ...
2017-03-19scsi: scsi_dh_alua: Warn if the first argument of alua_rtpg_queue() is NULLBart Van Assche1-1/+1
Callers must provide a valid port group to alua_rtpg_queue(). Issue a kernel warning if that is not the case. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-19scsi: scsi_dh_alua: Ensure that alua_activate() calls the completion functionBart Van Assche1-5/+15
Callers of scsi_dh_activate(), e.g. dm-mpath, assume that this function either returns an error code or calls the completion function. Make alua_activate() call the completion function even if scsi_device_get() fails. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Tang Junhui <tang.junhui@zte.com.cn> Cc: <stable@vger.kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-19scsi: scsi_dh_alua: Check scsi_device_get() return valueBart Van Assche1-9/+9
Do not queue ALUA work nor call scsi_device_put() if the scsi_device_get() call fails. This patch fixes the following crash: general protection fault: 0000 [#1] SMP RIP: 0010:scsi_device_put+0xb/0x30 Call Trace: scsi_disk_put+0x2d/0x40 sd_release+0x3d/0xb0 __blkdev_put+0x29e/0x360 blkdev_put+0x49/0x170 dm_put_table_device+0x58/0xc0 [dm_mod] dm_put_device+0x70/0xc0 [dm_mod] free_priority_group+0x92/0xc0 [dm_multipath] free_multipath+0x70/0xc0 [dm_multipath] multipath_dtr+0x19/0x20 [dm_multipath] dm_table_destroy+0x67/0x120 [dm_mod] dev_suspend+0xde/0x240 [dm_mod] ctl_ioctl+0x1f5/0x520 [dm_mod] dm_ctl_ioctl+0xe/0x20 [dm_mod] do_vfs_ioctl+0x8f/0x700 SyS_ioctl+0x3c/0x70 entry_SYSCALL_64_fastpath+0x18/0xad Fixes: commit 03197b61c5ec ("scsi_dh_alua: Use workqueue for RTPG") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Tang Junhui <tang.junhui@zte.com.cn> Cc: <stable@vger.kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-19qla2xxx: Update driver version to 9.00.00.00-kHimanshu Madhani1-3/+3
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-19qla2xxx: Fix delayed response to command for loop mode/direct connect.Quinn Tran6-20/+81
Current driver wait for FW to be in the ready state before processing in-coming commands. For Arbitrated Loop or Point-to- Point (not switch), FW Ready state can take a while. FW will transition to ready state after all Nports have been logged in. In the mean time, certain initiators have completed the login and starts IO. Driver needs to start processing all queues if FW is already started. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-19qla2xxx: Change scsi host lookup method.Quinn Tran7-40/+100
For target mode, when new scsi command arrive, driver first performs a look up of the SCSI Host. The current look up method is based on the ALPA portion of the NPort ID. For Cisco switch, the ALPA can not be used as the index. Instead, the new search method is based on the full value of the Nport_ID via btree lib. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-19qla2xxx: Add DebugFS node to display Port DatabaseHimanshu Madhani2-4/+90
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-19qla2xxx: Use IOCB interface to submit non-critical MBX.Quinn Tran6-65/+279
The Mailbox interface is currently over subscribed. We like to reserve the Mailbox interface for the chip managment and link initialization. Any non essential Mailbox command will be routed through the IOCB interface. The IOCB interface is able to absorb more commands. Following commands are being routed through IOCB interface - Get ID List (007Ch) - Get Port DB (0064h) - Get Link Priv Stats (006Dh) Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-19qla2xxx: Add async new target notificationQuinn Tran2-3/+4
Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-19qla2xxx: Export DIF stats via debugfsAnil Gurumurthy2-0/+27
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-19qla2xxx: Improve T10-DIF/PI handling in driver.Quinn Tran7-251/+406
Add routines to support T10 DIF tag. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-19qla2xxx: Allow relogin to proceed if remote login did not finishQuinn Tran4-8/+32
If the remote port have started the login process, then the PLOGI and PRLI should be back to back. Driver will allow the remote port to complete the process. For the case where the remote port decide to back off from sending PRLI, this local port sets an expiration timer for the PRLI. Once the expiration time passes, the relogin retry logic is allowed to go through and perform login with the remote port. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-19qla2xxx: Fix sess_lock & hardware_lock lock order problem.Quinn Tran1-23/+18
The main lock that needs to be held for CMD or TMR submission to upper layer is the sess_lock. The sess_lock is used to serialize cmd submission and session deletion. The addition of hardware_lock being held is not necessary. This patch removes hardware_lock dependency from CMD/TMR submission. Use hardware_lock only for error response in this case. Path1 CPU0 CPU1 ---- ---- lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); Path2/deadlock *** DEADLOCK *** Call Trace: dump_stack+0x85/0xc2 print_circular_bug+0x1e3/0x250 __lock_acquire+0x1425/0x1620 lock_acquire+0xbf/0x210 _raw_spin_lock_irqsave+0x53/0x70 qlt_sess_work_fn+0x21d/0x480 [qla2xxx] process_one_work+0x1f4/0x6e0 Cc: <stable@vger.kernel.org> Cc: Bart Van Assche <Bart.VanAssche@sandisk.com> Reported-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-19qla2xxx: Fix inadequate lock protection for ABTS.Quinn Tran1-2/+10
Normally, ABTS is sent to Target Core as Task MGMT command. In the case of error, qla2xxx needs to send response, hardware_lock is required to prevent request queue corruption. Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-19qla2xxx: Fix request queue corruption.Quinn Tran1-3/+9
When FW notify driver or driver detects low FW resource, driver tries to send out Busy SCSI Status to tell Initiator side to back off. During the send process, the lock was not held. Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-19qla2xxx: Fix memory leak for abts processingQuinn Tran1-0/+2
Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-19qla2xxx: Allow vref count to timeout on vport delete.Joe Carnuccio5-10/+16
Cc: <stable@vger.kernel.org> Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-17scsi: sg: check length passed to SG_NEXT_CMD_LENpeter chang1-0/+2
The user can control the size of the next command passed along, but the value passed to the ioctl isn't checked against the usable max command size. Cc: <stable@vger.kernel.org> Signed-off-by: Peter Chang <dpf@google.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-16scsi: ufshcd-platform: remove the useless cast in ERR_PTR/IS_ERRTomas Winkler1-2/+2
IS_ERR and ERR_PTR already forcefully cast their argument, hence there is no need for additional (complex) casting. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-16scsi: qedi: Add PCI device-ID for QL41xxx adapters.Manish Rangankar1-0/+1
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-16scsi: aacraid: Fix potential null accessRaghava Aditya Renukunta1-8/+6
Currently, command threads fails to return ioctls commands for older controller versions, since it returns when all the fibs have been allocated. Another issue is even all the fibs have not been allocated, the correct allocated fibs is not updated nor freed. Fixes: 113156bcea9ef1e6 (scsi: aacraid: Reworked aac_command_thread) Reported-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-16scsi: qla2xxx: Fix crash in qla2xxx_eh_abort on bad ptrBill Kuzeja1-1/+2
After a Qlogic card breaks when initializing (test case), the system can crash in qla2xxx_eh_abort if processing anything but a scsi command type srb. Fixes: 1535aa75a3d8 ("scsi: qla2xxx: fix invalid DMA access after command aborts in PCI device remove") Signed-off-by: Bill Kuzeja <william.kuzeja@stratus.com> Acked-By: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-15Merge remote-tracking branch 'mkp-scsi/4.11/scsi-fixes' into fixesJames Bottomley12-55/+69
2017-03-15Merge tag 'scsi-fixes' of ↵Linus Torvalds40-285/+640
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a rather large set of fixes. The bulk are for lpfc correcting a lot of issues in the new NVME driver code which just went in in the merge window. The others are: - fix a hang in the vmware paravirt driver caused by incorrect handling of the new MSI vector allocation - long standing bug in storvsc, which recent block changes turned from being a harmless annoyance into a hang - yet more fallout (in mpt3sas) from the changes to device blocking The remainder are small fixes and updates" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (34 commits) scsi: lpfc: Add shutdown method for kexec scsi: storvsc: Workaround for virtual DVD SCSI version scsi: lpfc: revise version number to 11.2.0.10 scsi: lpfc: code cleanups in NVME initiator discovery scsi: lpfc: code cleanups in NVME initiator base scsi: lpfc: correct rdp diag portnames scsi: lpfc: remove dead sli3 nvme code scsi: lpfc: correct double print scsi: lpfc: Rename LPFC_MAX_EQ_DELAY to LPFC_MAX_EQ_DELAY_EQID_CNT scsi: lpfc: Rework lpfc Kconfig for NVME options scsi: lpfc: add transport eh_timed_out reference scsi: lpfc: Fix eh_deadline setting for sli3 adapters. scsi: lpfc: add NVME exchange aborts scsi: lpfc: Fix nvme allocation bug on failed nvme_fc_register_localport scsi: lpfc: Fix IO submission if WQ is full scsi: lpfc: Fix NVME CMD IU byte swapped word 1 problem scsi: lpfc: Fix RCTL value on NVME LS request and response scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters scsi: lpfc: fix missing spin_unlock on sql_list_lock scsi: lpfc: don't dereference dma_buf->iocbq before null check ...
2017-03-15scsi: lpfc: Finalize Kconfig options for nvmeJames Smart5-24/+17
Reviewing the result of what was just added for Kconfig, we made a poor choice. It worked well for full kernel builds, but not so much for how it would be deployed on a distro. Here's the final result: - lpfc will compile in NVME initiator and/or NVME target support based on whether the kernel has the corresponding subsystem support. Kconfig is not used to drive this specifically for lpfc. - There is a module parameter, lpfc_enable_fc4_type, that indicates whether the ports will do FCP-only or FCP & NVME (NVME-only not yet possible due to dependency on fc transport). As FCP & NVME divvys up exchange resources, and given NVME will not be often initially, the default is changed to FCP only. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-15scsi: ufs: don't check unsigned type for a negative valueTomas Winkler1-1/+1
Fix compilation warning: drivers/scsi/ufs/ufshcd.c:7645:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if ((value < UFS_PM_LVL_0) || (value >= UFS_PM_LVL_MAX)) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-15scsi: hpsa: do not timeout reset operationsDon Brace1-1/+1
Resets can take longer than DEFAULT_TIMEOUT. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-15scsi: hpsa: limit outstanding rescansDon Brace2-1/+16
Avoid rescan storms. No need to queue another if one is pending. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-15scsi: hpsa: update check for logical volume statusDon Brace2-19/+18
- Add in a new case for volume offline. Resolves internal testing bug for multilun array management. - Return correct status for failed TURs. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-14scsi: megaraid_sas: Driver version upgradeShivasharan S1-2/+2
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-24 15:17:49 +0300