summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2023-04-20scsi: ses: Handle enclosure with just a primary component gracefullyJiri Kosina1-12/+8
commit c8e22b7a1694bb8d025ea636816472739d859145 upstream. This reverts commit 3fe97ff3d949 ("scsi: ses: Don't attach if enclosure has no components") and introduces proper handling of case where there are no detected secondary components, but primary component (enumerated in num_enclosures) does exist. That fix was originally proposed by Ding Hui <dinghui@sangfor.com.cn>. Completely ignoring devices that have one primary enclosure and no secondary one results in ses_intf_add() bailing completely scsi 2:0:0:254: enclosure has no enumerated components scsi 2:0:0:254: Failed to bind enclosure -12ven in valid configurations such even on valid configurations with 1 primary and 0 secondary enclosures as below: # sg_ses /dev/sg0 3PARdata SES 3321 Supported diagnostic pages: Supported Diagnostic Pages [sdp] [0x0] Configuration (SES) [cf] [0x1] Short Enclosure Status (SES) [ses] [0x8] # sg_ses -p cf /dev/sg0 3PARdata SES 3321 Configuration diagnostic page: number of secondary subenclosures: 0 generation code: 0x0 enclosure descriptor list Subenclosure identifier: 0 [primary] relative ES process id: 0, number of ES processes: 1 number of type descriptor headers: 1 enclosure logical identifier (hex): 20000002ac02068d enclosure vendor: 3PARdata product: VV rev: 3321 type descriptor header and text list Element type: Unspecified, subenclosure id: 0 number of possible elements: 1 The changelog for the original fix follows ===== We can get a crash when disconnecting the iSCSI session, the call trace like this: [ffff00002a00fb70] kfree at ffff00000830e224 [ffff00002a00fba0] ses_intf_remove at ffff000001f200e4 [ffff00002a00fbd0] device_del at ffff0000086b6a98 [ffff00002a00fc50] device_unregister at ffff0000086b6d58 [ffff00002a00fc70] __scsi_remove_device at ffff00000870608c [ffff00002a00fca0] scsi_remove_device at ffff000008706134 [ffff00002a00fcc0] __scsi_remove_target at ffff0000087062e4 [ffff00002a00fd10] scsi_remove_target at ffff0000087064c0 [ffff00002a00fd70] __iscsi_unbind_session at ffff000001c872c4 [ffff00002a00fdb0] process_one_work at ffff00000810f35c [ffff00002a00fe00] worker_thread at ffff00000810f648 [ffff00002a00fe70] kthread at ffff000008116e98 In ses_intf_add, components count could be 0, and kcalloc 0 size scomp, but not saved in edev->component[i].scratch In this situation, edev->component[0].scratch is an invalid pointer, when kfree it in ses_intf_remove_enclosure, a crash like above would happen The call trace also could be other random cases when kfree cannot catch the invalid pointer We should not use edev->component[] array when the components count is 0 We also need check index when use edev->component[] array in ses_enclosure_data_process ===== Reported-by: Michal Kolar <mich.k@seznam.cz> Originally-by: Ding Hui <dinghui@sangfor.com.cn> Cc: stable@vger.kernel.org Fixes: 3fe97ff3d949 ("scsi: ses: Don't attach if enclosure has no components") Signed-off-by: Jiri Kosina <jkosina@suse.cz> Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2304042122270.29760@cbobk.fhfr.pm Tested-by: Michal Kolar <mich.k@seznam.cz> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05scsi: megaraid_sas: Fix crash after a double completionTomas Henzl1-2/+2
[ Upstream commit 2309df27111a51734cb9240b4d3c25f2f3c6ab06 ] When a physical disk is attached directly "without JBOD MAP support" (see megasas_get_tm_devhandle()) then there is no real error handling in the driver. Return FAILED instead of SUCCESS. Fixes: 18365b138508 ("megaraid_sas: Task management support") Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230324150134.14696-1-thenzl@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05scsi: core: Add BLIST_SKIP_VPD_PAGES for SKhynix H28U74301AMRJoel Selvaraj1-0/+1
commit a204b490595de71016b2360a1886ec8c12d0afac upstream. Xiaomi Poco F1 (qcom/sdm845-xiaomi-beryllium*.dts) comes with a SKhynix H28U74301AMR UFS. The sd_read_cpr() operation leads to a 120 second timeout, making the device bootup very slow: [ 121.457736] sd 0:0:0:1: [sdb] tag#23 timing out command, waited 120s Setting the BLIST_SKIP_VPD_PAGES allows the device to skip the failing sd_read_cpr operation and boot normally. Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com> Link: https://lore.kernel.org/r/20230313041402.39330-1-joelselvaraj.oss@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05scsi: lpfc: Avoid usage of list iterator variable after loopJakob Koschel1-4/+4
[ Upstream commit 2850b23e9f9ae3696e472d2883ea1b43aafa884e ] If the &epd_pool->list is empty when executing lpfc_get_io_buf_from_expedite_pool() the function would return an invalid pointer. Even in the case if the list is guaranteed to be populated, the iterator variable should not be used after the loop to be more robust for future changes. Linus proposed to avoid any use of the list iterator variable after the loop, in the attempt to move the list iterator variable declaration into the macro to avoid any potential misuse after the loop [1]. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel <jkl820.git@gmail.com> Link: https://lore.kernel.org/r/20230301-scsi-lpfc-avoid-list-iterator-after-loop-v1-1-325578ae7561@gmail.com Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05scsi: ufs: core: Add soft dependency on governor_simpleondemandAdrien Thierry1-0/+1
[ Upstream commit 2ebe16155dc8bd4e602cad5b5f65458d2eaa1a75 ] The ufshcd driver uses simpleondemand governor for devfreq. Add it to the list of ufshcd softdeps to allow userspace initramfs tools like dracut to automatically pull the governor module into the initramfs together with UFS drivers. Link: https://lore.kernel.org/r/20230220140740.14379-1-athierry@redhat.com Signed-off-by: Adrien Thierry <athierry@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05scsi: qla2xxx: Perform lockless command completion in abort pathNilesh Javali1-0/+11
commit 0367076b0817d5c75dfb83001ce7ce5c64d803a9 upstream. While adding and removing the controller, the following call trace was observed: WARNING: CPU: 3 PID: 623596 at kernel/dma/mapping.c:532 dma_free_attrs+0x33/0x50 CPU: 3 PID: 623596 Comm: sh Kdump: loaded Not tainted 5.14.0-96.el9.x86_64 #1 RIP: 0010:dma_free_attrs+0x33/0x50 Call Trace: qla2x00_async_sns_sp_done+0x107/0x1b0 [qla2xxx] qla2x00_abort_srb+0x8e/0x250 [qla2xxx] ? ql_dbg+0x70/0x100 [qla2xxx] __qla2x00_abort_all_cmds+0x108/0x190 [qla2xxx] qla2x00_abort_all_cmds+0x24/0x70 [qla2xxx] qla2x00_abort_isp_cleanup+0x305/0x3e0 [qla2xxx] qla2x00_remove_one+0x364/0x400 [qla2xxx] pci_device_remove+0x36/0xa0 __device_release_driver+0x17a/0x230 device_release_driver+0x24/0x30 pci_stop_bus_device+0x68/0x90 pci_stop_and_remove_bus_device_locked+0x16/0x30 remove_store+0x75/0x90 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 ? do_user_addr_fault+0x1d8/0x680 ? do_syscall_64+0x69/0x80 ? exc_page_fault+0x62/0x140 ? asm_exc_page_fault+0x8/0x30 entry_SYSCALL_64_after_hwframe+0x44/0xae The command was completed in the abort path during driver unload with a lock held, causing the warning in abort path. Hence complete the command without any lock held. Reported-by: Lin Li <lilin@redhat.com> Tested-by: Lin Li <lilin@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230313043711.13500-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05scsi: scsi_dh_alua: Fix memleak for 'qdata' in alua_activate()Yu Kuai1-2/+4
[ Upstream commit a13faca032acbf2699293587085293bdfaafc8ae ] If alua_rtpg_queue() failed from alua_activate(), then 'qdata' is not freed, which will cause following memleak: unreferenced object 0xffff88810b2c6980 (size 32): comm "kworker/u16:2", pid 635322, jiffies 4355801099 (age 1216426.076s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 40 39 24 c1 ff ff ff ff 00 f8 ea 0a 81 88 ff ff @9$............. backtrace: [<0000000098f3a26d>] alua_activate+0xb0/0x320 [<000000003b529641>] scsi_dh_activate+0xb2/0x140 [<000000007b296db3>] activate_path_work+0xc6/0xe0 [dm_multipath] [<000000007adc9ace>] process_one_work+0x3c5/0x730 [<00000000c457a985>] worker_thread+0x93/0x650 [<00000000cb80e628>] kthread+0x1ba/0x210 [<00000000a1e61077>] ret_from_fork+0x22/0x30 Fix the problem by freeing 'qdata' in error path. Fixes: 625fe857e4fa ("scsi: scsi_dh_alua: Check scsi_device_get() return value") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20230315062154.668812-1-yukuai1@huaweicloud.com Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22scsi: core: Fix a procfs host directory removal regressionBart Van Assche1-3/+0
[ Upstream commit be03df3d4bfe7e8866d4aa43d62e648ffe884f5f ] scsi_proc_hostdir_rm() decreases a reference counter and hence must only be called once per host that is removed. This change does not require a scsi_add_host_with_dma() change since scsi_add_host_with_dma() will return 0 (success) if scsi_proc_host_add() is called. Fixes: fc663711b944 ("scsi: core: Remove the /proc/scsi/${proc_name} directory earlier") Cc: John Garry <john.g.garry@oracle.com> Reported-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/all/ed6b8027-a9d9-1b45-be8e-df4e8c6c4605@oracle.com/ Reported-by: syzbot+645a4616b87a2f10e398@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-scsi/000000000000890fab05f65342b6@google.com/ Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230307214428.3703498-1-bvanassche@acm.org Tested-by: John Garry <john.g.garry@oracle.com> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22scsi: core: Fix a comment in function scsi_host_dev_release()Xiang Chen1-1/+1
[ Upstream commit 2dde5c8d912efea43be94d6a83ac9cb74879fa12 ] Commit 3be8828fc507 ("scsi: core: Avoid that ATA error handling can trigger a kernel hang or oops") moved rcu to scsi_cmnd instead of shost. Modify "shost->rcu" to "scmd->rcu" in a comment. Link: https://lore.kernel.org/r/1620646526-193154-1-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Stable-dep-of: be03df3d4bfe ("scsi: core: Fix a procfs host directory removal regression") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22scsi: mpt3sas: Fix NULL pointer access in mpt3sas_transport_port_add()Wenchao Hao1-2/+12
[ Upstream commit d3c57724f1569311e4b81e98fad0931028b9bdcd ] Port is allocated by sas_port_alloc_num() and rphy is allocated by either sas_end_device_alloc() or sas_expander_alloc(), all of which may return NULL. So we need to check the rphy to avoid possible NULL pointer access. If sas_rphy_add() returned with failure, rphy is set to NULL. We would access the rphy in the following lines which would also result NULL pointer access. Fixes: 78316e9dfc24 ("scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()") Signed-off-by: Wenchao Hao <haowenchao2@huawei.com> Link: https://lore.kernel.org/r/20230225100135.2109330-1-haowenchao2@huawei.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17scsi: megaraid_sas: Update max supported LD IDs to 240Chandrakanth Patil2-1/+3
[ Upstream commit bfa659177dcba48cf13f2bd88c1972f12a60bf1c ] The firmware only supports Logical Disk IDs up to 240 and LD ID 255 (0xFF) is reserved for deleted LDs. However, in some cases, firmware was assigning LD ID 254 (0xFE) to deleted LDs and this was causing the driver to mark the wrong disk as deleted. This in turn caused the wrong disk device to be taken offline by the SCSI midlayer. To address this issue, limit the LD ID range from 255 to 240. This ensures the deleted LD ID is properly identified and removed by the driver without accidently deleting any valid LDs. Fixes: ae6874ba4b43 ("scsi: megaraid_sas: Early detection of VD deletion through RaidMap update") Reported-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Link: https://lore.kernel.org/r/20230302105342.34933-2-chandrakanth.patil@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17scsi: core: Remove the /proc/scsi/${proc_name} directory earlierBart Van Assche1-0/+2
[ Upstream commit fc663711b94468f4e1427ebe289c9f05669699c9 ] Remove the /proc/scsi/${proc_name} directory earlier to fix a race condition between unloading and reloading kernel modules. This fixes a bug introduced in 2009 by commit 77c019768f06 ("[SCSI] fix /proc memory leak in the SCSI core"). Fix the following kernel warning: proc_dir_entry 'scsi/scsi_debug' already registered WARNING: CPU: 19 PID: 27986 at fs/proc/generic.c:376 proc_register+0x27d/0x2e0 Call Trace: proc_mkdir+0xb5/0xe0 scsi_proc_hostdir_add+0xb5/0x170 scsi_host_alloc+0x683/0x6c0 sdebug_driver_probe+0x6b/0x2d0 [scsi_debug] really_probe+0x159/0x540 __driver_probe_device+0xdc/0x230 driver_probe_device+0x4f/0x120 __device_attach_driver+0xef/0x180 bus_for_each_drv+0xe5/0x130 __device_attach+0x127/0x290 device_initial_probe+0x17/0x20 bus_probe_device+0x110/0x130 device_add+0x673/0xc80 device_register+0x1e/0x30 sdebug_add_host_helper+0x1a7/0x3b0 [scsi_debug] scsi_debug_init+0x64f/0x1000 [scsi_debug] do_one_initcall+0xd7/0x470 do_init_module+0xe7/0x330 load_module+0x122a/0x12c0 __do_sys_finit_module+0x124/0x1a0 __x64_sys_finit_module+0x46/0x50 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Link: https://lore.kernel.org/r/20230210205200.36973-3-bvanassche@acm.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Yi Zhang <yi.zhang@redhat.com> Cc: stable@vger.kernel.org Fixes: 77c019768f06 ("[SCSI] fix /proc memory leak in the SCSI core") Reported-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11scsi: ipr: Work around fortify-string warningArnd Bergmann1-20/+21
[ Upstream commit ee4e7dfe4ffc9ca50c6875757bd119abfe22b5c5 ] The ipr_log_vpd_compact() function triggers a fortified memcpy() warning about a potential string overflow with all versions of clang: In file included from drivers/scsi/ipr.c:43: In file included from include/linux/string.h:254: include/linux/fortify-string.h:520:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning] __write_overflow_field(p_size_field, size); ^ include/linux/fortify-string.h:520:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning] 2 errors generated. I don't see anything actually wrong with the function, but this is the only instance I can reproduce of the fortification going wrong in the kernel at the moment, so the easiest solution may be to rewrite the function into something that does not trigger the warning. Instead of having a combined buffer for vendor/device/serial strings, use three separate local variables and just truncate the whitespace individually. Link: https://lore.kernel.org/r/20230214132831.2118392-1-arnd@kernel.org Cc: Kees Cook <keescook@chromium.org> Fixes: 8cf093e275d0 ("[SCSI] ipr: Improved dual adapter errors") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11scsi: ses: Fix slab-out-of-bounds in ses_intf_remove()Tomas Henzl1-1/+2
commit 578797f0c8cbc2e3ec5fc0dab87087b4c7073686 upstream. A fix for: BUG: KASAN: slab-out-of-bounds in ses_intf_remove+0x23f/0x270 [ses] Read of size 8 at addr ffff88a10d32e5d8 by task rmmod/12013 When edev->components is zero, accessing edev->component[0] members is wrong. Link: https://lore.kernel.org/r/20230202162451.15346-5-thenzl@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-11scsi: ses: Fix possible desc_ptr out-of-bounds accessesTomas Henzl1-5/+9
commit 801ab13d50cf3d26170ee073ea8bb4eececb76ab upstream. Sanitize possible desc_ptr out-of-bounds accesses in ses_enclosure_data_process(). Link: https://lore.kernel.org/r/20230202162451.15346-4-thenzl@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-11scsi: ses: Fix possible addl_desc_ptr out-of-bounds accessesTomas Henzl1-9/+26
commit db95d4df71cb55506425b6e4a5f8d68e3a765b63 upstream. Sanitize possible addl_desc_ptr out-of-bounds accesses in ses_enclosure_data_process(). Link: https://lore.kernel.org/r/20230202162451.15346-3-thenzl@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-11scsi: ses: Fix slab-out-of-bounds in ses_enclosure_data_process()Tomas Henzl1-2/+4
commit 9b4f5028e493cb353a5c8f5c45073eeea0303abd upstream. A fix for: BUG: KASAN: slab-out-of-bounds in ses_enclosure_data_process+0x949/0xe30 [ses] Read of size 1 at addr ffff88a1b043a451 by task systemd-udevd/3271 Checking after (and before in next loop) addl_desc_ptr[1] is sufficient, we expect the size to be sanitized before first access to addl_desc_ptr[1]. Make sure we don't walk beyond end of page. Link: https://lore.kernel.org/r/20230202162451.15346-2-thenzl@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-11scsi: ses: Don't attach if enclosure has no componentsJames Bottomley1-0/+6
commit 3fe97ff3d94934649abb0652028dd7296170c8d0 upstream. An enclosure with no components can't usefully be operated by the driver (since effectively it has nothing to manage), so report the problem and don't attach. Not attaching also fixes an oops which could occur if the driver tries to manage a zero component enclosure. [mkp: Switched to KERN_WARNING since this scenario is common] Link: https://lore.kernel.org/r/c5deac044ac409e32d9ad9968ce0dcbc996bfc7a.camel@linux.ibm.com Cc: stable@vger.kernel.org Reported-by: Ding Hui <dinghui@sangfor.com.cn> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-11scsi: qla2xxx: Fix erroneous link downQuinn Tran1-2/+5
commit 3fbc74feb642deb688cc97f76d40b7287ddd4cb1 upstream. If after an adapter reset the appearance of link is not recovered, the devices are not rediscovered. This is result of a race condition between adapter reset (abort_isp) and the topology scan. During adapter reset, the ABORT_ISP_ACTIVE flag is set. Topology scan usually occurred after adapter reset. In this case, the topology scan came earlier than usual where it ran into problem due to ABORT_ISP_ACTIVE flag was still set. kernel: qla2xxx [0000:13:00.0]-1005:1: Cmd 0x6a aborted with timeout since ISP Abort is pending kernel: qla2xxx [0000:13:00.0]-28a0:1: MBX_GET_PORT_NAME failed, No FL Port. kernel: qla2xxx [0000:13:00.0]-286b:1: qla2x00_configure_loop: exiting normally. local port wwpn 51402ec0123d9a80 id 012300) kernel: qla2xxx [0000:13:00.0]-8017:1: ADAPTER RESET SUCCEEDED nexus=1:0:15. Allow adapter reset to complete before any scan can start. Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-11scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requestsArun Easi1-18/+1
commit c75e6aef5039830cce5d4cf764dd204522f89e6b upstream. The following message and call trace was seen with debug kernels: DMA-API: qla2xxx 0000:41:00.0: device driver failed to check map error [device address=0x00000002a3ff38d8] [size=1024 bytes] [mapped as single] WARNING: CPU: 0 PID: 2930 at kernel/dma/debug.c:1017 check_unmap+0xf42/0x1990 Call Trace: debug_dma_unmap_page+0xc9/0x100 qla_nvme_ls_unmap+0x141/0x210 [qla2xxx] Remove DMA mapping from the driver altogether, as it is already done by FC layer. This prevents the warning. Fixes: c85ab7d9e27a ("scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests") Cc: stable@vger.kernel.org Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-11scsi: qla2xxx: Fix link failure in NPIV environmentQuinn Tran1-1/+1
commit b1ae65c082f74536ec292b15766f2846f0238373 upstream. User experienced symptoms of adapter failure in NPIV environment. NPIV hosts were allowed to trigger chip reset back to back due to NPIV link state being slow to come online. Fix link failure in NPIV environment by removing NPIV host from directly being able to perform chip reset. kernel: qla2xxx [0000:04:00.1]-6009:261: Loop down - aborting ISP. kernel: qla2xxx [0000:04:00.1]-6009:262: Loop down - aborting ISP. kernel: qla2xxx [0000:04:00.1]-6009:281: Loop down - aborting ISP. kernel: qla2xxx [0000:04:00.1]-6009:285: Loop down - aborting ISP Fixes: 0d6e61bc6a4f ("[SCSI] qla2xxx: Correct various NPIV issues.") Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-11scsi: aic94xx: Add missing check for dma_map_single()Jiasheng Jiang1-0/+3
[ Upstream commit 32fe45274edb5926abc0fac7263d9f889d02d9cf ] Add check for dma_map_single() and return error if it fails in order to avoid invalid DMA address. Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Link: https://lore.kernel.org/r/20230128110832.6792-1-jiasheng@iscas.ac.cn Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11Revert "scsi: core: run queue if SCSI device queue isn't ready and queue is ↵Douglas Anderson1-6/+1
idle" [ Upstream commit b4fd63f42647110c963d4bfcd526ac48f5a5faff ] This reverts commit 7e70aa789d4a0c89dbfbd2c8a974a4df717475ec. Now that we have the patches ("blk-mq: In blk_mq_dispatch_rq_list() "no budget" is a reason to kick") and ("blk-mq: Rerun dispatching in the case of budget contention") we should no longer need the fix in the SCSI code. Revert it, resolving conflicts with other patches that have touched this code. With this revert (and the two new patches) I can run the script that was in commit 7e70aa789d4a ("scsi: core: run queue if SCSI device queue isn't ready and queue is idle") in a loop with no failure. If I do this revert without the two new patches I can easily get a failure. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Stable-dep-of: c31e76bcc379 ("blk-mq: remove stale comment for blk_mq_sched_mark_restart_hctx") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-22scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddressMike Christie1-3/+6
[ Upstream commit f484a794e4ee2a9ce61f52a78e810ac45f3fe3b3 ] If during iscsi_sw_tcp_session_create() iscsi_tcp_r2tpool_alloc() fails, userspace could be accessing the host's ipaddress attr. If we then free the session via iscsi_session_teardown() while userspace is still accessing the session we will hit a use after free bug. Set the tcp_sw_host->session after we have completed session creation and can no longer fail. Link: https://lore.kernel.org/r/20230117193937.21244-3-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Acked-by: Ding Hui <dinghui@sangfor.com.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-22scsi: Revert "scsi: core: map PQ=1, PDT=other values to ↵Martin K. Petersen1-4/+3
SCSI_SCAN_TARGET_PRESENT" [ Upstream commit 15600159bcc6abbeae6b33a849bef90dca28b78f ] This reverts commit 948e922fc44611ee2de0c89583ca958cb5307d36. Not all targets that return PQ=1 and PDT=0 should be ignored. While the SCSI spec is vague in this department, there appears to be a critical mass of devices which rely on devices being accessible with this combination of reported values. Fixes: 948e922fc446 ("scsi: core: map PQ=1, PDT=other values to SCSI_SCAN_TARGET_PRESENT") Link: https://lore.kernel.org/r/yq1lelrleqr.fsf@ca-mkp.ca.oracle.com Acked-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Martin Wilck <mwilck@suse.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-06scsi: hpsa: Fix allocation size for scsi_host_alloc()Alexey V. Vissarionov1-1/+1
[ Upstream commit bbbd25499100c810ceaf5193c3cfcab9f7402a33 ] The 'h' is a pointer to struct ctlr_info, so it's just 4 or 8 bytes, while the structure itself is much bigger. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: edd163687ea5 ("hpsa: add driver for HP Smart Array controllers.") Link: https://lore.kernel.org/r/20230118031255.GE15213@altlinux.org Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org> Acked-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-06scsi: hisi_sas: Set a port invalid only if there are no devices attached ↵Yihang Li1-1/+1
when refreshing port id [ Upstream commit f58c89700630da6554b24fd3df293a24874c10c1 ] Currently the driver sets the port invalid if one phy in the port is not enabled, which may cause issues in expander situation. In directly attached situation, if phy up doesn't occur in time when refreshing port id, the port is incorrectly set to invalid which will also cause disk lost. Therefore set a port invalid only if there are no devices attached to the port. Signed-off-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/1672805000-141102-3-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18scsi: snic: Fix possible UAF in snic_tgt_create()Gaosheng Cui1-0/+3
[ Upstream commit e118df492320176af94deec000ae034cc92be754 ] Smatch reports a warning as follows: drivers/scsi/snic/snic_disc.c:307 snic_tgt_create() warn: '&tgt->list' not removed from list If device_add() fails in snic_tgt_create(), tgt will be freed, but tgt->list will not be removed from snic->disc.tgt_list, then list traversal may cause UAF. Remove from snic->disc.tgt_list before free(). Fixes: c8806b6c9e82 ("snic: driver for Cisco SCSI HBA") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20221117035100.2944812-1-cuigaosheng1@huawei.com Acked-by: Narsimhulu Musini <nmusini@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18scsi: fcoe: Fix transport not deattached when fcoe_if_init() failsChen Zhongjin1-0/+1
[ Upstream commit 4155658cee394b22b24c6d64e49247bf26d95b92 ] fcoe_init() calls fcoe_transport_attach(&fcoe_sw_transport), but when fcoe_if_init() fails, &fcoe_sw_transport is not detached and leaves freed &fcoe_sw_transport on fcoe_transports list. This causes panic when reinserting module. BUG: unable to handle page fault for address: fffffbfff82e2213 RIP: 0010:fcoe_transport_attach+0xe1/0x230 [libfcoe] Call Trace: <TASK> do_one_initcall+0xd0/0x4e0 load_module+0x5eee/0x7210 ... Fixes: 78a582463c1e ("[SCSI] fcoe: convert fcoe.ko to become an fcoe transport provider driver") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Link: https://lore.kernel.org/r/20221115092442.133088-1-chenzhongjin@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18scsi: ipr: Fix WARNING in ipr_init()Shang XiaoJing1-1/+9
[ Upstream commit e6f108bffc3708ddcff72324f7d40dfcd0204894 ] ipr_init() will not call unregister_reboot_notifier() when pci_register_driver() fails, which causes a WARNING. Call unregister_reboot_notifier() when pci_register_driver() fails. notifier callback ipr_halt [ipr] already registered WARNING: CPU: 3 PID: 299 at kernel/notifier.c:29 notifier_chain_register+0x16d/0x230 Modules linked in: ipr(+) xhci_pci_renesas xhci_hcd ehci_hcd usbcore led_class gpu_sched drm_buddy video wmi drm_ttm_helper ttm drm_display_helper drm_kms_helper drm drm_panel_orientation_quirks agpgart cfbft CPU: 3 PID: 299 Comm: modprobe Tainted: G W 6.1.0-rc1-00190-g39508d23b672-dirty #332 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:notifier_chain_register+0x16d/0x230 Call Trace: <TASK> __blocking_notifier_chain_register+0x73/0xb0 ipr_init+0x30/0x1000 [ipr] do_one_initcall+0xdb/0x480 do_init_module+0x1cf/0x680 load_module+0x6a50/0x70a0 __do_sys_finit_module+0x12f/0x1c0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: f72919ec2bbb ("[SCSI] ipr: implement shutdown changes and remove obsolete write cache parameter") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20221113064513.14028-1-shangxiaojing@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18scsi: fcoe: Fix possible name leak when device_register() failsYang Yingliang1-9/+10
[ Upstream commit 47b6a122c7b69a876c7ee2fc064a26b09627de9d ] If device_register() returns an error, the name allocated by dev_set_name() needs to be freed. As the comment of device_register() says, one should use put_device() to give up the reference in the error path. Fix this by calling put_device(), then the name can be freed in kobject_cleanup(). The 'fcf' is freed in fcoe_fcf_device_release(), so the kfree() in the error path can be removed. The 'ctlr' is freed in fcoe_ctlr_device_release(), so don't use the error label, just return NULL after calling put_device(). Fixes: 9a74e884ee71 ("[SCSI] libfcoe: Add fcoe_sysfs") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221112094310.3633291-1-yangyingliang@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18scsi: hpsa: Fix possible memory leak in hpsa_add_sas_device()Yang Yingliang1-1/+3
[ Upstream commit fda34a5d304d0b98cc967e8763b52221b66dc202 ] If hpsa_sas_port_add_rphy() returns an error, the 'rphy' allocated in sas_end_device_alloc() needs to be freed. Address this by calling sas_rphy_free() in the error path. Fixes: d04e62b9d63a ("hpsa: add in sas transport class") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221111043012.1074466-1-yangyingliang@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18scsi: hpsa: Fix error handling in hpsa_add_sas_host()Yang Yingliang1-1/+2
[ Upstream commit 4ef174a3ad9b5d73c1b6573e244ebba2b0d86eac ] hpsa_sas_port_add_phy() does: ... sas_phy_add() -> may return error here sas_port_add_phy() ... Whereas hpsa_free_sas_phy() does: ... sas_port_delete_phy() sas_phy_delete() ... If hpsa_sas_port_add_phy() returns an error, hpsa_free_sas_phy() can not be called to free the memory because the port and the phy have not been added yet. Replace hpsa_free_sas_phy() with sas_phy_free() and kfree() to avoid kernel crash in this case. Fixes: d04e62b9d63a ("hpsa: add in sas transport class") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221110151129.394389-1-yangyingliang@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()Yang Yingliang1-0/+2
[ Upstream commit 78316e9dfc24906dd474630928ed1d3c562b568e ] In mpt3sas_transport_port_add(), if sas_rphy_add() returns error, sas_rphy_free() needs be called to free the resource allocated in sas_end_device_alloc(). Otherwise a kernel crash will happen: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 CPU: 45 PID: 37020 Comm: bash Kdump: loaded Tainted: G W 6.1.0-rc1+ #189 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x54/0x3d0 lr : device_del+0x37c/0x3d0 Call trace: device_del+0x54/0x3d0 attribute_container_class_device_del+0x28/0x38 transport_remove_classdev+0x6c/0x80 attribute_container_device_trigger+0x108/0x110 transport_remove_device+0x28/0x38 sas_rphy_remove+0x50/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_rphy_remove+0x38/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_remove_host+0x20/0x38 [scsi_transport_sas] scsih_remove+0xd8/0x420 [mpt3sas] Because transport_add_device() is not called when sas_rphy_add() fails, the device is not added. When sas_rphy_remove() is subsequently called to remove the device in the remove() path, a NULL pointer dereference happens. Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221109032403.1636422-1-yangyingliang@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18scsi: hpsa: Fix possible memory leak in hpsa_init_one()Yuan Can1-1/+1
[ Upstream commit 9c9ff300e0de07475796495d86f449340d454a0c ] The hpda_alloc_ctlr_info() allocates h and its field reply_map. However, in hpsa_init_one(), if alloc_percpu() failed, the hpsa_init_one() jumps to clean1 directly, which frees h and leaks the h->reply_map. Fix by calling hpda_free_ctlr_info() to release h->replay_map and h instead free h directly. Fixes: 8b834bff1b73 ("scsi: hpsa: fix selection of reply queue") Signed-off-by: Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20221122015751.87284-1-yuancan@huawei.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18scsi: scsi_debug: Fix a warning in resp_write_scat()Harshit Mogalapalli1-1/+1
[ Upstream commit 216e179724c1d9f57a8ababf8bd7aaabef67f01b ] As 'lbdof_blen' is coming from user, if the size in kzalloc() is >= MAX_ORDER then we hit a warning. Call trace: sg_ioctl sg_ioctl_common scsi_ioctl sg_scsi_ioctl blk_execute_rq blk_mq_sched_insert_request blk_mq_run_hw_queue __blk_mq_delay_run_hw_queue __blk_mq_run_hw_queue blk_mq_sched_dispatch_requests __blk_mq_sched_dispatch_requests blk_mq_dispatch_rq_list scsi_queue_rq scsi_dispatch_cmd scsi_debug_queuecommand schedule_resp resp_write_scat If you try to allocate a memory larger than(>=) MAX_ORDER, then kmalloc() will definitely fail. It creates a stack trace and messes up dmesg. The user controls the size here so if they specify a too large size it will fail. Add __GFP_NOWARN in order to avoid too large allocation warning. This is detected by static analysis using smatch. Fixes: 481b5e5c7949 ("scsi: scsi_debug: add resp_write_scat function") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20221111100526.1790533-1-harshit.m.mogalapalli@oracle.com Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10scsi: core: Restrict legal sdev_state transitions via sysfsUday Shankar1-0/+8
[ Upstream commit 2331ce6126be8864b39490e705286b66e2344aac ] Userspace can currently write to sysfs to transition sdev_state to RUNNING or OFFLINE from any source state. This causes issues because proper transitioning out of some states involves steps besides just changing sdev_state, so allowing userspace to change sdev_state regardless of the source state can result in inconsistencies; e.g. with ISCSI we can end up with sdev_state == SDEV_RUNNING while the device queue is quiesced. Any task attempting I/O on the device will then hang, and in more recent kernels, iscsid will hang as well. More detail about this bug is provided in my first attempt: https://groups.google.com/g/open-iscsi/c/PNKca4HgPDs/m/CXaDkntOAQAJ Link: https://lore.kernel.org/r/20220924000241.2967323-1-ushankar@purestorage.com Signed-off-by: Uday Shankar <ushankar@purestorage.com> Suggested-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26scsi: 3w-9xxx: Avoid disabling device if failing to enable itLetu Ren1-1/+1
[ Upstream commit 7eff437b5ee1309b34667844361c6bbb5c97df05 ] The original code will "goto out_disable_device" and call pci_disable_device() if pci_enable_device() fails. The kernel will generate a warning message like "3w-9xxx 0000:00:05.0: disabling already-disabled device". We shouldn't disable a device that failed to be enabled. A simple return is fine. Link: https://lore.kernel.org/r/20220829110115.38789-1-fantasquex@gmail.com Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26scsi: libsas: Fix use-after-free bug in smp_execute_task_sg()Duoming Zhou1-1/+1
[ Upstream commit 46ba53c30666717cb06c2b3c5d896301cd00d0c0 ] When executing SMP task failed, the smp_execute_task_sg() calls del_timer() to delete "slow_task->timer". However, if the timer handler sas_task_internal_timedout() is running, the del_timer() in smp_execute_task_sg() will not stop it and a UAF will happen. The process is shown below: (thread 1) | (thread 2) smp_execute_task_sg() | sas_task_internal_timedout() ... | del_timer() | ... | ... sas_free_task(task) | kfree(task->slow_task) //FREE| | task->slow_task->... //USE Fix by calling del_timer_sync() in smp_execute_task_sg(), which makes sure the timer handler have finished before the "task->slow_task" is deallocated. Link: https://lore.kernel.org/r/20220920144213.10536-1-duoming@zju.edu.cn Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-15scsi: stex: Properly zero out the passthrough command structureLinus Torvalds1-8/+9
commit 6022f210461fef67e6e676fd8544ca02d1bcfa7a upstream. The passthrough structure is declared off of the stack, so it needs to be set to zero before copied back to userspace to prevent any unintentional data leakage. Switch things to be statically allocated which will fill the unused fields with 0 automatically. Link: https://lore.kernel.org/r/YxrjN3OOw2HHl9tx@kroah.com Cc: stable@kernel.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: hdthky <hdthky0@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-15scsi: qedf: Fix a UAF bug in __qedf_probe()Letu Ren1-5/+0
[ Upstream commit fbfe96869b782364caebae0445763969ddb6ea67 ] In __qedf_probe(), if qedf->cdev is NULL which means qed_ops->common->probe() failed, then the program will goto label err1, and scsi_host_put() will free lport->host pointer. Because the memory qedf points to is allocated by libfc_host_alloc(), it will be freed by scsi_host_put(). However, the if statement below label err0 only checks whether qedf is NULL but doesn't check whether the memory has been freed. So a UAF bug can occur. There are two ways to reach the statements below err0. The first one is described as before, "qedf" should be set to NULL. The second one is goto "err0" directly. In the latter scenario qedf hasn't been changed and it has the initial value NULL. As a result the if statement is not reachable in any situation. The KASAN logs are as follows: [ 2.312969] BUG: KASAN: use-after-free in __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] [ 2.312969] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 2.312969] Call Trace: [ 2.312969] dump_stack_lvl+0x59/0x7b [ 2.312969] print_address_description+0x7c/0x3b0 [ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] __kasan_report+0x160/0x1c0 [ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] kasan_report+0x4b/0x70 [ 2.312969] ? kobject_put+0x25d/0x290 [ 2.312969] kasan_check_range+0x2ca/0x310 [ 2.312969] __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] ? selinux_kernfs_init_security+0xdc/0x5f0 [ 2.312969] ? trace_rpm_return_int_rcuidle+0x18/0x120 [ 2.312969] ? rpm_resume+0xa5c/0x16e0 [ 2.312969] ? qedf_get_generic_tlv_data+0x160/0x160 [ 2.312969] local_pci_probe+0x13c/0x1f0 [ 2.312969] pci_device_probe+0x37e/0x6c0 Link: https://lore.kernel.org/r/20211112120641.16073-1-fantasquex@gmail.com Reported-by: Zheyu Ma <zheyuma97@gmail.com> Acked-by: Saurav Kashyap <skashyap@marvell.com> Co-developed-by: Wende Tan <twd2.me@gmail.com> Signed-off-by: Wende Tan <twd2.me@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15scsi: lpfc: Add missing destroy_workqueue() in error pathYang Yingliang1-1/+4
commit da6d507f5ff328f346b3c50e19e19993027b8ffd upstream. Add the missing destroy_workqueue() before return from lpfc_sli4_driver_resource_setup() in the error path. Link: https://lore.kernel.org/r/20220823044237.285643-1-yangyingliang@huawei.com Fixes: 3cee98db2610 ("scsi: lpfc: Fix crash on driver unload in wq free") Reviewed-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15scsi: mpt3sas: Fix use-after-free warningSreekanth Reddy1-1/+1
commit 991df3dd5144f2e6b1c38b8d20ed3d4d21e20b34 upstream. Fix the following use-after-free warning which is observed during controller reset: refcount_t: underflow; use-after-free. WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0 Link: https://lore.kernel.org/r/20220906134908.1039-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15scsi: megaraid_sas: Fix double kfree()Guixin Liu1-1/+0
[ Upstream commit 8c499e49240bd93628368c3588975cfb94169b8b ] When allocating log_to_span fails, kfree(instance->ctrl_context) is called twice. Remove redundant call. Link: https://lore.kernel.org/r/1659424729-46502-1-git-send-email-kanie@linux.alibaba.com Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-05scsi: storvsc: Remove WQ_MEM_RECLAIM from storvsc_error_wqSaurabh Sengar1-1/+1
commit d957e7ffb2c72410bcc1a514153a46719255a5da upstream. storvsc_error_wq workqueue should not be marked as WQ_MEM_RECLAIM as it doesn't need to make forward progress under memory pressure. Marking this workqueue as WQ_MEM_RECLAIM may cause deadlock while flushing a non-WQ_MEM_RECLAIM workqueue. In the current state it causes the following warning: [ 14.506347] ------------[ cut here ]------------ [ 14.506354] workqueue: WQ_MEM_RECLAIM storvsc_error_wq_0:storvsc_remove_lun is flushing !WQ_MEM_RECLAIM events_freezable_power_:disk_events_workfn [ 14.506360] WARNING: CPU: 0 PID: 8 at <-snip->kernel/workqueue.c:2623 check_flush_dependency+0xb5/0x130 [ 14.506390] CPU: 0 PID: 8 Comm: kworker/u4:0 Not tainted 5.4.0-1086-azure #91~18.04.1-Ubuntu [ 14.506391] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022 [ 14.506393] Workqueue: storvsc_error_wq_0 storvsc_remove_lun [ 14.506395] RIP: 0010:check_flush_dependency+0xb5/0x130 <-snip-> [ 14.506408] Call Trace: [ 14.506412] __flush_work+0xf1/0x1c0 [ 14.506414] __cancel_work_timer+0x12f/0x1b0 [ 14.506417] ? kernfs_put+0xf0/0x190 [ 14.506418] cancel_delayed_work_sync+0x13/0x20 [ 14.506420] disk_block_events+0x78/0x80 [ 14.506421] del_gendisk+0x3d/0x2f0 [ 14.506423] sr_remove+0x28/0x70 [ 14.506427] device_release_driver_internal+0xef/0x1c0 [ 14.506428] device_release_driver+0x12/0x20 [ 14.506429] bus_remove_device+0xe1/0x150 [ 14.506431] device_del+0x167/0x380 [ 14.506432] __scsi_remove_device+0x11d/0x150 [ 14.506433] scsi_remove_device+0x26/0x40 [ 14.506434] storvsc_remove_lun+0x40/0x60 [ 14.506436] process_one_work+0x209/0x400 [ 14.506437] worker_thread+0x34/0x400 [ 14.506439] kthread+0x121/0x140 [ 14.506440] ? process_one_work+0x400/0x400 [ 14.506441] ? kthread_park+0x90/0x90 [ 14.506443] ret_from_fork+0x35/0x40 [ 14.506445] ---[ end trace 2d9633159fdc6ee7 ]--- Link: https://lore.kernel.org/r/1659628534-17539-1-git-send-email-ssengar@linux.microsoft.com Fixes: 436ad9413353 ("scsi: storvsc: Allow only one remove lun work item to be issued per lun") Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25scsi: lpfc: Prevent buffer overflow crashes in debugfs with malformed user inputJames Smart1-10/+10
[ Upstream commit f8191d40aa612981ce897e66cda6a88db8df17bb ] Malformed user input to debugfs results in buffer overflow crashes. Adapt input string lengths to fit within internal buffers, leaving space for NULL terminators. Link: https://lore.kernel.org/r/20220701211425.2708-3-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25scsi: sg: Allow waiting for commands to complete on removed deviceTony Battersby1-23/+34
commit 3455607fd7be10b449f5135c00dc306b85dc0d21 upstream. When a SCSI device is removed while in active use, currently sg will immediately return -ENODEV on any attempt to wait for active commands that were sent before the removal. This is problematic for commands that use SG_FLAG_DIRECT_IO since the data buffer may still be in use by the kernel when userspace frees or reuses it after getting ENODEV, leading to corrupted userspace memory (in the case of READ-type commands) or corrupted data being sent to the device (in the case of WRITE-type commands). This has been seen in practice when logging out of a iscsi_tcp session, where the iSCSI driver may still be processing commands after the device has been marked for removal. Change the policy to allow userspace to wait for active sg commands even when the device is being removed. Return -ENODEV only when there are no more responses to read. Link: https://lore.kernel.org/r/5ebea46f-fe83-2d0b-233d-d0dcb362dd0a@cybernetics.com Cc: <stable@vger.kernel.org> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25scsi: qla2xxx: Fix erroneous mailbox timeout after PCI error injectionQuinn Tran1-6/+6
commit f260694e6463b63ae550aad25ddefe94cb1904da upstream. Clear wait for mailbox interrupt flag to prevent stale mailbox: Feb 22 05:22:56 ltcden4-lp7 kernel: qla2xxx [0135:90:00.1]-500a:4: LOOP UP detected (16 Gbps). Feb 22 05:22:59 ltcden4-lp7 kernel: qla2xxx [0135:90:00.1]-d04c:4: MBX Command timeout for cmd 69, ... To fix the issue, driver needs to clear the MBX_INTR_WAIT flag on purging the mailbox. When the stale mailbox completion does arrive, it will be dropped. Link: https://lore.kernel.org/r/20220616053508.27186-11-njavali@marvell.com Fixes: b6faaaf796d7 ("scsi: qla2xxx: Serialize mailbox request") Cc: Naresh Bannoth <nbannoth@in.ibm.com> Cc: Kyle Mahlkuch <Kyle.Mahlkuch@ibm.com> Cc: stable@vger.kernel.org Reported-by: Naresh Bannoth <nbannoth@in.ibm.com> Tested-by: Naresh Bannoth <nbannoth@in.ibm.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25scsi: qla2xxx: Turn off multi-queue for 8G adaptersQuinn Tran2-12/+8
commit 5304673bdb1635e27555bd636fd5d6956f1cd552 upstream. For 8G adapters, multi-queue was enabled accidentally. Make sure multi-queue is not enabled. Link: https://lore.kernel.org/r/20220616053508.27186-5-njavali@marvell.com Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25scsi: qla2xxx: Fix discovery issues in FC-AL topologyArun Easi3-2/+35
commit 47ccb113cead905bdc236571bf8ac6fed90321b3 upstream. A direct attach tape device, when gets swapped with another, was not discovered. Fix this by looking at loop map and reinitialize link if there are devices present. Link: https://lore.kernel.org/linux-scsi/baef87c3-5dad-3b47-44c1-6914bfc90108@cybernetics.com/ Link: https://lore.kernel.org/r/20220713052045.10683-8-njavali@marvell.com Cc: stable@vger.kernel.org Reported-by: Tony Battersby <tonyb@cybernetics.com> Tested-by: Tony Battersby <tonyb@cybernetics.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-14 02:35:17 +0300