| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 1b8d0300a3e9f216ae4901bab886db7299899ec6 ]
|- iscsi_if_destroy_conn |-dev_attr_show
|-iscsi_conn_teardown
|-spin_lock_bh |-iscsi_sw_tcp_conn_get_param
|-kfree(conn->persistent_address) |-iscsi_conn_get_param
|-kfree(conn->local_ipaddr)
==>|-read persistent_address
==>|-read local_ipaddr
|-spin_unlock_bh
When iscsi_conn_teardown() and iscsi_conn_get_param() happen in parallel, a
UAF may be triggered.
Link: https://lore.kernel.org/r/046ec8a0-ce95-d3fc-3235-666a7c65b224@huawei.com
Reported-by: Lu Tixiong <lutianxiong@huawei.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Lixiaokeng <lixiaokeng@huawei.com>
Signed-off-by: Linfeilong <linfeilong@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 142c779d05d1fef75134c3cb63f52ccbc96d9e1f upstream.
The PVSCSI implementation in the VMware hypervisor under specific
configuration ("SCSI Bus Sharing" set to "Physical") returns zero dataLen
in the completion descriptor for READ CAPACITY(16). As a result, the kernel
can not detect proper disk geometry. This can be recognized by the kernel
message:
[ 0.776588] sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512.
The PVSCSI implementation in QEMU does not set dataLen at all, keeping it
zeroed. This leads to a boot hang as was reported by Shmulik Ladkani.
It is likely that the controller returns the garbage at the end of the
buffer. Residual length should be set by the driver in that case. The SCSI
layer will erase corresponding data. See commit bdb2b8cab439 ("[SCSI] erase
invalid data returned by device") for details.
Commit e662502b3a78 ("scsi: vmw_pvscsi: Set correct residual data length")
introduced the issue by setting residual length unconditionally, causing
the SCSI layer to erase the useful payload beyond dataLen when this value
is returned as 0.
As a result, considering existing issues in implementations of PVSCSI
controllers, we do not want to call scsi_set_resid() when dataLen ==
0. Calling scsi_set_resid() has no effect if dataLen equals buffer length.
Link: https://lore.kernel.org/lkml/20210824120028.30d9c071@blondie/
Link: https://lore.kernel.org/r/20211220190514.55935-1-amakhalov@vmware.com
Fixes: e662502b3a78 ("scsi: vmw_pvscsi: Set correct residual data length")
Cc: Matt Wang <wwentao@vmware.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Vishal Bhakta <vbhakta@vmware.com>
Cc: VMware PV-Drivers <pv-drivers@vmware.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: linux-scsi@vger.kernel.org
Cc: stable@vger.kernel.org
Reported-and-suggested-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9020be114a47bf7ff33e179b3bb0016b91a098e6 ]
The "mybuf" string comes from the user, so we need to ensure that it is NUL
terminated.
Link: https://lore.kernel.org/r/20211214070527.GA27934@kili
Fixes: bd2cdd5e400f ("scsi: lpfc: NVME Initiator: Add debugfs support")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e0a2c28da11e2c2b963fc01d50acbf03045ac732 upstream.
In resp_mode_select() sanity check the block descriptor len to avoid UAF.
BUG: KASAN: use-after-free in resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
Read of size 1 at addr ffff888026670f50 by task scsicmd/15032
CPU: 1 PID: 15032 Comm: scsicmd Not tainted 5.15.0-01d0625 #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Call Trace:
<TASK>
dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:107
print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:257
kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:443
__asan_report_load1_noabort+0x14/0x20 mm/kasan/report_generic.c:306
resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
schedule_resp+0x4af/0x1a10 drivers/scsi/scsi_debug.c:5483
scsi_debug_queuecommand+0x8c9/0x1e70 drivers/scsi/scsi_debug.c:7537
scsi_queue_rq+0x16b4/0x2d10 drivers/scsi/scsi_lib.c:1521
blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1640
__blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
__blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1762
__blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1839
blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:63
sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:837
sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:775
sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:941
sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1166
__x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:52
do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:50
entry_SYSCALL_64_after_hwframe+0x44/0xae arch/x86/entry/entry_64.S:113
Link: https://lore.kernel.org/r/1637262208-28850-1-git-send-email-george.kennedy@oracle.com
Reported-by: syzkaller <syzkaller@googlegroups.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 36e07d7ede88a1f1ef8f0f209af5b7612324ac2c upstream.
Change min_t() to use type "u32" instead of type "int" to avoid stack out
of bounds. With min_t() type "int" the values get sign extended and the
larger value gets used causing stack out of bounds.
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:191 [inline]
BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976
Read of size 127 at addr ffff888072607128 by task syz-executor.7/18707
CPU: 1 PID: 18707 Comm: syz-executor.7 Not tainted 5.15.0-syzk #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106
print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:256
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:459
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189
memcpy+0x23/0x60 mm/kasan/shadow.c:65
memcpy include/linux/fortify-string.h:191 [inline]
sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976
sg_copy_from_buffer+0x33/0x40 lib/scatterlist.c:1000
fill_from_dev_buffer.part.34+0x82/0x130 drivers/scsi/scsi_debug.c:1162
fill_from_dev_buffer drivers/scsi/scsi_debug.c:1888 [inline]
resp_readcap16+0x365/0x3b0 drivers/scsi/scsi_debug.c:1887
schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478
scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533
scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline]
scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699
blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639
__blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
__blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761
__blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838
blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62
sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:836
sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:774
sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:939
sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Link: https://lore.kernel.org/r/1636484247-21254-1-git-send-email-george.kennedy@oracle.com
Reported-by: syzkaller <syzkaller@googlegroups.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3344b58b53a76199dae48faa396e9fc37bf86992 upstream.
If the size arg to kcalloc() is zero, it returns ZERO_SIZE_PTR. Because of
that, for a following NULL pointer check to work on the returned pointer,
kcalloc() must not be called with the size arg equal to zero. Return early
without error before the kcalloc() call if size arg is zero.
BUG: KASAN: null-ptr-deref in memcpy include/linux/fortify-string.h:191 [inline]
BUG: KASAN: null-ptr-deref in sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974
Write of size 4 at addr 0000000000000010 by task syz-executor.1/22789
CPU: 1 PID: 22789 Comm: syz-executor.1 Not tainted 5.15.0-syzk #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106
__kasan_report mm/kasan/report.c:446 [inline]
kasan_report.cold.14+0x112/0x117 mm/kasan/report.c:459
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189
memcpy+0x3b/0x60 mm/kasan/shadow.c:66
memcpy include/linux/fortify-string.h:191 [inline]
sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974
do_dout_fetch drivers/scsi/scsi_debug.c:2954 [inline]
do_dout_fetch drivers/scsi/scsi_debug.c:2946 [inline]
resp_verify+0x49e/0x930 drivers/scsi/scsi_debug.c:4276
schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478
scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533
scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline]
scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699
blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639
__blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
__blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761
__blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838
blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62
blk_execute_rq+0xdb/0x360 block/blk-exec.c:102
sg_scsi_ioctl drivers/scsi/scsi_ioctl.c:621 [inline]
scsi_ioctl+0x8bb/0x15c0 drivers/scsi/scsi_ioctl.c:930
sg_ioctl_common+0x172d/0x2710 drivers/scsi/sg.c:1112
sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Link: https://lore.kernel.org/r/1636056397-13151-1-git-send-email-george.kennedy@oracle.com
Reported-by: syzkaller <syzkaller@googlegroups.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7db0e0c8190a086ef92ce5bb960836cde49540aa upstream.
According to ZBC and SPC specifications, the unit of ALLOCATION LENGTH
field of REPORT ZONES command is byte. However, current scsi_debug
implementation handles it as number of zones to calculate buffer size to
report zones. When the ALLOCATION LENGTH has a large number, this results
in too large buffer size and causes memory allocation failure. Fix the
failure by handling ALLOCATION LENGTH as byte unit.
Link: https://lore.kernel.org/r/20211207010638.124280-1-shinichiro.kawasaki@wdc.com
Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 653926205741add87a6cf452e21950eebc6ac10b upstream.
Calling scsi_remove_host() before scsi_add_host() results in a crash:
BUG: kernel NULL pointer dereference, address: 0000000000000108
RIP: 0010:device_del+0x63/0x440
Call Trace:
device_unregister+0x17/0x60
scsi_remove_host+0xee/0x2a0
pm8001_pci_probe+0x6ef/0x1b90 [pm80xx]
local_pci_probe+0x3f/0x90
We cannot call scsi_remove_host() in pm8001_alloc() because scsi_add_host()
has not been called yet at that point in time.
Function call tree:
pm8001_pci_probe()
|
`- pm8001_pci_alloc()
| |
| `- pm8001_alloc()
| |
| `- scsi_remove_host()
|
`- scsi_add_host()
Link: https://lore.kernel.org/r/20211201041627.1592487-1-ipylypiv@google.com
Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues")
Reviewed-by: Vishakha Channapattan <vishakhavc@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 69002c8ce914ef0ae22a6ea14b43bb30b9a9a6a8 upstream.
Commit 598a90f2002c ("scsi: qla2xxx: add ring buffer for tracing debug
logs") introduced unconditional log string formatting to ql_dbg() even if
ql_dbg_log event is disabled. It harms performance because some strings are
formatted in fastpath and/or interrupt context.
Link: https://lore.kernel.org/r/20211112145446.51210-1-r.bolshakov@yadro.com
Fixes: 598a90f2002c ("scsi: qla2xxx: add ring buffer for tracing debug logs")
Cc: Rajan Shanmugavelu <rajan.shanmugavelu@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a0c2f8b6709a9a4af175497ca65f93804f57b248 ]
We can race where iscsi_session_recovery_timedout() has woken up the error
handler thread and it's now setting the devices to offline, and
session_recovery_timedout()'s call to scsi_target_unblock() is also trying
to set the device's state to transport-offline. We can then get a mix of
states.
For the case where we can't relogin we want the devices to be in
transport-offline so when we have repaired the connection
__iscsi_unblock_session() can set the state back to running.
Set the device state then call into libiscsi to wake up the error handler.
Link: https://lore.kernel.org/r/20211105221048.6541-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d62253eb1b60f4ce8b39125eee282739b519297 ]
When a reset is requested the position of the write pointer is updated but
the data in the corresponding zone is not cleared. Instead scsi_debug
returns any data written before the write pointer was reset. This is an
error and prevents using scsi_debug for stale page cache testing of the
BLKRESETZONE ioctl.
Zero written data in the zone when resetting the write pointer.
Link: https://lore.kernel.org/r/20211122061223.298890-1-shinichiro.kawasaki@wdc.com
Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eb97545d6264b341b06ba7603f52ff6c0b2af6ea ]
This fixes an issue added in commit 4edd8cd4e86d ("scsi: core: sysfs: Fix
hang when device state is set via sysfs") where if userspace is requesting
to set the device state to SDEV_RUNNING when the state is already
SDEV_RUNNING, we return -EINVAL instead of count. The commmit above set ret
to count for this case, when it should have set it to 0.
Link: https://lore.kernel.org/r/20211120164917.4924-1-michael.christie@oracle.com
Fixes: 4edd8cd4e86d ("scsi: core: sysfs: Fix hang when device state is set via sysfs")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ee4ba13e09c9d9c1cb6abb59da8295d9952328b ]
While looping over shost's sdev list it is possible that one
of the drives is getting removed and its sas_target object is
freed but its sdev object remains intact.
Consequently, a kernel panic can occur while the driver is trying to access
the sas_address field of sas_target object without also checking the
sas_target object for NULL.
Link: https://lore.kernel.org/r/20211117104909.2069-1-sreekanth.reddy@broadcom.com
Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 886fe2915cce6658b0fc19e64b82879325de61ea upstream.
__ufshcd_issue_tm_cmd() clears req->end_io_data after timing out, which
races with the completion function ufshcd_tmc_handler() which expects
req->end_io_data to have a value.
Note __ufshcd_issue_tm_cmd() and ufshcd_tmc_handler() are already
synchronized using hba->tmf_rqs and hba->outstanding_tasks under the
host_lock spinlock.
It is also not necessary (nor typical) to clear req->end_io_data because
the block layer does it before allocating out requests e.g. via
blk_get_request().
So fix by not clearing it.
Link: https://lore.kernel.org/r/20211108064815.569494-2-adrian.hunter@intel.com
Fixes: f5ef336fd2e4 ("scsi: ufs: core: Fix task management completion")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[Adrian: Backport to v5.10]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f5ef336fd2e4c36dedae4e7ca66cf5349d6fda62 upstream.
The UFS driver uses blk_mq_tagset_busy_iter() when identifying task
management requests to complete, however blk_mq_tagset_busy_iter() doesn't
work.
blk_mq_tagset_busy_iter() only iterates requests dispatched by the block
layer. That appears as if it might have started since commit 37f4a24c2469
("blk-mq: centralise related handling into blk_mq_get_driver_tag") which
removed 'data->hctx->tags->rqs[rq->tag] = rq' from blk_mq_rq_ctx_init()
which gets called:
blk_get_request
blk_mq_alloc_request
__blk_mq_alloc_request
blk_mq_rq_ctx_init
Since UFS task management requests are not dispatched by the block layer,
hctx->tags->rqs[rq->tag] remains NULL, and since blk_mq_tagset_busy_iter()
relies on finding requests using hctx->tags->rqs[rq->tag], UFS task
management requests are never found by blk_mq_tagset_busy_iter().
By using blk_mq_tagset_busy_iter(), the UFS driver was relying on internal
details of the block layer, which was fragile and subsequently got
broken. Fix by removing the use of blk_mq_tagset_busy_iter() and having the
driver keep track of task management requests.
Link: https://lore.kernel.org/r/20210922091059.4040-1-adrian.hunter@intel.com
Fixes: 1235fc569e0b ("scsi: ufs: core: Fix task management request completion timeout")
Fixes: 69a6c269c097 ("scsi: ufs: Use blk_{get,put}_request() to allocate and free TMFs")
Cc: stable@vger.kernel.org
Tested-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[Adrian: Backport to v5.10]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 392006871bb26166bcfafa56faf49431c2cfaaa8 upstream.
The SCM changes set the flags in mcp->out_mb instead of mcp->in_mb so the
data was not actually being read into the mcp->mb[] array from the adapter.
Link: https://lore.kernel.org/r/20211108183012.13895-1-emilne@redhat.com
Fixes: 9f2475fe7406 ("scsi: qla2xxx: SAN congestion management implementation")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4edd8cd4e86dd3047e5294bbefcc0a08f66a430f ]
This fixes a regression added with:
commit f0f82e2476f6 ("scsi: core: Fix capacity set to zero after
offlinining device")
The problem is that after iSCSI recovery, iscsid will call into the kernel
to set the dev's state to running, and with that patch we now call
scsi_rescan_device() with the state_mutex held. If the SCSI error handler
thread is just starting to test the device in scsi_send_eh_cmnd() then it's
going to try to grab the state_mutex.
We are then stuck, because when scsi_rescan_device() tries to send its I/O
scsi_queue_rq() calls -> scsi_host_queue_ready() -> scsi_host_in_recovery()
which will return true (the host state is still in recovery) and I/O will
just be requeued. scsi_send_eh_cmnd() will then never be able to grab the
state_mutex to finish error handling.
To prevent the deadlock move the rescan-related code to after we drop the
state_mutex.
This also adds a check for if we are already in the running state. This
prevents extra scans and helps the iscsid case where if the transport class
has already onlined the device during its recovery process then we don't
need userspace to do it again plus possibly block that daemon.
Link: https://lore.kernel.org/r/20211105221048.6541-3-michael.christie@oracle.com
Fixes: f0f82e2476f6 ("scsi: core: Fix capacity set to zero after offlinining device")
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: lijinlin <lijinlin3@huawei.com>
Cc: Wu Bo <wubo40@huawei.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f347c26836c270199de1599c3cd466bb7747caa9 ]
The following issue was observed running syzkaller:
BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:377 [inline]
BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
Read of size 2132 at addr ffff8880aea95dc8 by task syz-executor.0/9815
CPU: 0 PID: 9815 Comm: syz-executor.0 Not tainted 4.19.202-00874-gfc0fe04215a9 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xe4/0x14a lib/dump_stack.c:118
print_address_description+0x73/0x280 mm/kasan/report.c:253
kasan_report_error mm/kasan/report.c:352 [inline]
kasan_report+0x272/0x370 mm/kasan/report.c:410
memcpy+0x1f/0x50 mm/kasan/kasan.c:302
memcpy include/linux/string.h:377 [inline]
sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
fill_from_dev_buffer+0x14f/0x340 drivers/scsi/scsi_debug.c:1021
resp_report_tgtpgs+0x5aa/0x770 drivers/scsi/scsi_debug.c:1772
schedule_resp+0x464/0x12f0 drivers/scsi/scsi_debug.c:4429
scsi_debug_queuecommand+0x467/0x1390 drivers/scsi/scsi_debug.c:5835
scsi_dispatch_cmd+0x3fc/0x9b0 drivers/scsi/scsi_lib.c:1896
scsi_request_fn+0x1042/0x1810 drivers/scsi/scsi_lib.c:2034
__blk_run_queue_uncond block/blk-core.c:464 [inline]
__blk_run_queue+0x1a4/0x380 block/blk-core.c:484
blk_execute_rq_nowait+0x1c2/0x2d0 block/blk-exec.c:78
sg_common_write.isra.19+0xd74/0x1dc0 drivers/scsi/sg.c:847
sg_write.part.23+0x6e0/0xd00 drivers/scsi/sg.c:716
sg_write+0x64/0xa0 drivers/scsi/sg.c:622
__vfs_write+0xed/0x690 fs/read_write.c:485
kill_bdev:block_device:00000000e138492c
vfs_write+0x184/0x4c0 fs/read_write.c:549
ksys_write+0x107/0x240 fs/read_write.c:599
do_syscall_64+0xc2/0x560 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x49/0xbe
We get 'alen' from command its type is int. If userspace passes a large
length we will get a negative 'alen'.
Switch n, alen, and rlen to u32.
Link: https://lore.kernel.org/r/20211013033913.2551004-3-yebin10@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4e3ace0051e7e504b55d239daab8789dd89b863c ]
The following warning was observed running syzkaller:
[ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in;
[ 3813.830724] program syz-executor not setting count and/or reply_len properly
[ 3813.836956] ==================================================================
[ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0
[ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549
[ 3813.846612] Call Trace:
[ 3813.846995] dump_stack+0x108/0x15f
[ 3813.847524] print_address_description+0xa5/0x372
[ 3813.848243] kasan_report.cold+0x236/0x2a8
[ 3813.849439] check_memory_region+0x240/0x270
[ 3813.850094] memcpy+0x30/0x80
[ 3813.850553] sg_copy_buffer+0x157/0x1e0
[ 3813.853032] sg_copy_from_buffer+0x13/0x20
[ 3813.853660] fill_from_dev_buffer+0x135/0x370
[ 3813.854329] resp_readcap16+0x1ac/0x280
[ 3813.856917] schedule_resp+0x41f/0x1630
[ 3813.858203] scsi_debug_queuecommand+0xb32/0x17e0
[ 3813.862699] scsi_dispatch_cmd+0x330/0x950
[ 3813.863329] scsi_request_fn+0xd8e/0x1710
[ 3813.863946] __blk_run_queue+0x10b/0x230
[ 3813.864544] blk_execute_rq_nowait+0x1d8/0x400
[ 3813.865220] sg_common_write.isra.0+0xe61/0x2420
[ 3813.871637] sg_write+0x6c8/0xef0
[ 3813.878853] __vfs_write+0xe4/0x800
[ 3813.883487] vfs_write+0x17b/0x530
[ 3813.884008] ksys_write+0x103/0x270
[ 3813.886268] __x64_sys_write+0x77/0xc0
[ 3813.886841] do_syscall_64+0x106/0x360
[ 3813.887415] entry_SYSCALL_64_after_hwframe+0x44/0xa9
This issue can be reproduced with the following syzkaller log:
r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0)
r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00')
open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000)
r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782)
write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126)
In resp_readcap16() we get "int alloc_len" value -1104926854, and then pass
the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. This
leads to OOB in sg_copy_buffer().
To solve this issue, define alloc_len as u32.
Link: https://lore.kernel.org/r/20211013033913.2551004-2-yebin10@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d4996c6eac4c81b8872043e9391563f67f13e406 ]
Pointers should be printed with %p or %px rather than cast to 'unsigned
long' and printed with %lx.
Change %lx to %p to print the hashed pointer.
Link: https://lore.kernel.org/r/20210929122538.1158235-1-qtxuning1999@sjtu.edu.cn
Signed-off-by: Guo Zhi <qtxuning1999@sjtu.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 99154581b05c8fb22607afb7c3d66c1bace6aa5d ]
When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass
the requests to the adapter. If such an attempt fails, a local "fail_msg"
string is set and a log message output. The job is then added to a
completions list for cancellation.
Processing of any further jobs from the txq list continues, but since
"fail_msg" remains set, jobs are added to the completions list regardless
of whether a wqe was passed to the adapter. If successfully added to
txcmplq, jobs are added to both lists resulting in list corruption.
Fix by clearing the fail_msg string after adding a job to the completions
list. This stops the subsequent jobs from being added to the completions
list unless they had an appropriate failure.
Link: https://lore.kernel.org/r/20210910233159.115896-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0b7a9fd934a68ebfc1019811b7bdc1742072ad7b ]
When user uses issue_lip to do link bounce, driver sends additional target
reset to remote device before resetting the link. The target reset would
affect other paths with active I/Os. This patch will remove the unnecessary
target reset.
Link: https://lore.kernel.org/r/20211026115412.27691-4-njavali@marvell.com
Fixes: 5854771e314e ("[SCSI] qla2xxx: Add ISPFX00 specific bus reset routine")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c98c5daaa24b583cba1369b7d167f93c6ae7299c ]
Current code does list element deletion and addition in and out of lock
protection. This patch moves deletion behind lock.
list_add double add: new=ffff9130b5eb89f8, prev=ffff9130b5eb89f8,
next=ffff9130c6a715f0.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:31!
invalid opcode: 0000 [#1] SMP PTI
CPU: 1 PID: 182395 Comm: kworker/1:37 Kdump: loaded Tainted: G W OE
--------- - - 4.18.0-193.el8.x86_64 #1
Hardware name: HP ProLiant DL160 Gen8, BIOS J03 02/10/2014
Workqueue: qla2xxx_wq qla2x00_iocb_work_fn [qla2xxx]
RIP: 0010:__list_add_valid+0x41/0x50
Code: 85 94 00 00 00 48 39 c7 74 0b 48 39 d7 74 06 b8 01 00 00 00 c3 48 89 f2
4c 89 c1 48 89 fe 48 c7 c7 60 83 ad 97 e8 4d bd ce ff <0f> 0b 0f 1f 00 66 2e
0f 1f 84 00 00 00 00 00 48 8b 07 48 8b 57 08
RSP: 0018:ffffaba306f47d68 EFLAGS: 00010046
RAX: 0000000000000058 RBX: ffff9130b5eb8800 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff9130b7456a00
RBP: ffff9130c6a70a58 R08: 000000000008d7be R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffff9130c6a715f0
R13: ffff9130b5eb8824 R14: ffff9130b5eb89f8 R15: ffff9130b5eb89f8
FS: 0000000000000000(0000) GS:ffff9130b7440000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007efcaaef11a0 CR3: 000000005200a002 CR4: 00000000000606e0
Call Trace:
qla24xx_async_gnl+0x113/0x3c0 [qla2xxx]
? qla2x00_iocb_work_fn+0x53/0x80 [qla2xxx]
? process_one_work+0x1a7/0x3b0
? worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
? kthread+0x112/0x130
Link: https://lore.kernel.org/r/20211026115412.27691-3-njavali@marvell.com
Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bb2ca6b3f09ac20e8357d257d0557ab5ddf6adcd ]
For RSCN of type "Area, Domain, or Fabric", which indicate a portion or
entire fabric was disturbed, current driver does not set the scan_need flag
to indicate a session was affected by the disturbance. This in turn can
lead to I/O timeout and delay of relogin. Hence initiate relogin in the
event of fabric disturbance.
Link: https://lore.kernel.org/r/20211026115412.27691-2-njavali@marvell.com
Fixes: 1560bafdff9e ("scsi: qla2xxx: Use complete switch scan for RSCN events")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 44c57f205876518b14ab2b4b5d88a181f41260bb ]
Add changes to support FCP2 Target.
Link: https://lore.kernel.org/r/20210810043720.1137-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b6ca770ae7f2c560a29bbd02c4e3d734fafaf804 ]
UFS drivers that probe defer will end up leaking memory allocated for clk
and regulator names via kstrdup() because the structure that is holding
this memory is allocated via devm_* variants which will be freed during
probe defer but the names are never freed.
Use same devm_* variant of kstrdup to free the memory allocated to name
when driver probe defers.
Kmemleak found around 11 leaks on Qualcomm Dragon Board RB5:
unreferenced object 0xffff66f243fb2c00 (size 128):
comm "kworker/u16:0", pid 7, jiffies 4294893319 (age 94.848s)
hex dump (first 32 bytes):
63 6f 72 65 5f 63 6c 6b 00 76 69 72 74 75 61 6c core_clk.virtual
2f 77 6f 72 6b 71 75 65 75 65 2f 73 63 73 69 5f /workqueue/scsi_
backtrace:
[<000000006f788cd1>] slab_post_alloc_hook+0x88/0x410
[<00000000cfd1372b>] __kmalloc_track_caller+0x138/0x230
[<00000000a92ab17b>] kstrdup+0xb0/0x110
[<0000000037263ab6>] ufshcd_pltfrm_init+0x1a8/0x500
[<00000000a20a5caa>] ufs_qcom_probe+0x20/0x58
[<00000000a5e43067>] platform_probe+0x6c/0x118
[<00000000ef686e3f>] really_probe+0xc4/0x330
[<000000005b18792c>] __driver_probe_device+0x88/0x118
[<00000000a5d295e8>] driver_probe_device+0x44/0x158
[<000000007e83f58d>] __device_attach_driver+0xb4/0x128
[<000000004bfa4470>] bus_for_each_drv+0x68/0xd0
[<00000000b89a83bc>] __device_attach+0xec/0x170
[<00000000ada2beea>] device_initial_probe+0x14/0x20
[<0000000079921612>] bus_probe_device+0x9c/0xa8
[<00000000d268bf7c>] deferred_probe_work_func+0x90/0xd0
[<000000009ef64bfa>] process_one_work+0x29c/0x788
unreferenced object 0xffff66f243fb2c80 (size 128):
comm "kworker/u16:0", pid 7, jiffies 4294893319 (age 94.848s)
hex dump (first 32 bytes):
62 75 73 5f 61 67 67 72 5f 63 6c 6b 00 00 00 00 bus_aggr_clk....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
With this patch no memory leaks are reported.
Link: https://lore.kernel.org/r/20210914092214.6468-1-srinivas.kandagatla@linaro.org
Fixes: aa4976130934 ("ufs: Add regulator enable support")
Fixes: c6e79dacd86f ("ufs: Add clock initialization support")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 81309c247a4dcd597cbda5254fd0afdd61b93f14 ]
Remove the param skip_ref_clk from __ufshcd_setup_clocks(), but keep a flag
in struct ufs_clk_info to tell whether a clock can be disabled or not while
the link is active.
Link: https://lore.kernel.org/r/1606356063-38380-2-git-send-email-cang@codeaurora.org
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f4875d509a0a78ad294a1a538d534b5ba94e685a ]
This variable is just a temporary variable, used to do an endian
conversion. The problem is that the last byte is not initialized. After
the conversion is completely done, the last byte is discarded so it doesn't
cause a problem. But static checkers and the KMSan runtime checker can
detect the uninitialized read and will complain about it.
Link: https://lore.kernel.org/r/20211006073242.GA8404@kili
Fixes: 5036f0a0ecd3 ("[SCSI] csiostor: Fix sparse warnings.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4084a7235d38311a77c86ba69ba849bd787db87b ]
pm8001_mpi_get_nvmd_resp() handles a GET_NVMD_DATA response, not a
SET_NVMD_DATA response, as the log statement implies.
Fixes: 1f889b58716a ("scsi: pm80xx: Fix pm8001_mpi_get_nvmd_resp() race condition")
Link: https://lore.kernel.org/r/20210929025847.646999-1-ipylypiv@google.com
Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cbd9a3347c757383f3d2b50cf7cfd03eb479c481 ]
dc395x_init_one()->adapter_init() might fail. In this case, the acb is
already cleaned up by adapter_init(), no need to do that in
adapter_uninit(acb) again.
[ 1.252251] dc395x: adapter init failed
[ 1.254900] RIP: 0010:adapter_uninit+0x94/0x170 [dc395x]
[ 1.260307] Call Trace:
[ 1.260442] dc395x_init_one.cold+0x72a/0x9bb [dc395x]
Link: https://lore.kernel.org/r/20210907040702.1846409-1-ztong0001@gmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a8f71014b4d56c4fb287607e844c0a9f68f46d9 ]
The sgl is freed in the target stack in target_release_cmd_kref() before
calling qlt_free_cmd() but there is an unmap of sgl in qlt_free_cmd() that
causes a panic if sgl is not yet DMA unmapped:
NIP dma_direct_unmap_sg+0xdc/0x180
LR dma_direct_unmap_sg+0xc8/0x180
Call Trace:
ql_dbg_prefix+0x68/0xc0 [qla2xxx] (unreliable)
dma_unmap_sg_attrs+0x54/0xf0
qlt_unmap_sg.part.19+0x54/0x1c0 [qla2xxx]
qlt_free_cmd+0x124/0x1d0 [qla2xxx]
tcm_qla2xxx_release_cmd+0x4c/0xa0 [tcm_qla2xxx]
target_put_sess_cmd+0x198/0x370 [target_core_mod]
transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod]
tcm_qla2xxx_complete_free+0x6c/0x90 [tcm_qla2xxx]
The sgl may be left unmapped in error cases of response sending. For
instance, qlt_rdy_to_xfer() maps sgl and exits when session is being
deleted keeping the sgl mapped.
This patch removes use-after-free of the sgl and ensures that the sgl is
unmapped for any command that was not sent to firmware.
Link: https://lore.kernel.org/r/20211018122650.11846-1-d.bogdanov@yadro.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 06634d5b6e923ed0d4772aba8def5a618f44c7fe ]
The driver probing function should return < 0 for failure, otherwise
kernel will treat value > 0 as success.
Link: https://lore.kernel.org/r/1634522181-31166-1-git-send-email-zheyuma97@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 3d33b303d4f3b74a71bede5639ebba3cfd2a2b4d upstream.
In eh_abort path driver prematurely exits the call to upper layer. Check
whether command is aborted / completed by firmware before exiting the call.
9 [ffff8b1ebf803c00] page_fault at ffffffffb0389778
[exception RIP: qla2x00_status_entry+0x48d]
RIP: ffffffffc04fa62d RSP: ffff8b1ebf803cb0 RFLAGS: 00010082
RAX: 00000000ffffffff RBX: 00000000000e0000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 00000000000013d8 RDI: fffff3253db78440
RBP: ffff8b1ebf803dd0 R8: ffff8b1ebcd9b0c0 R9: 0000000000000000
R10: ffff8b1e38a30808 R11: 0000000000001000 R12: 00000000000003e9
R13: 0000000000000000 R14: ffff8b1ebcd9d740 R15: 0000000000000028
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
10 [ffff8b1ebf803cb0] enqueue_entity at ffffffffafce708f
11 [ffff8b1ebf803d00] enqueue_task_fair at ffffffffafce7b88
12 [ffff8b1ebf803dd8] qla24xx_process_response_queue at ffffffffc04fc9a6
[qla2xxx]
13 [ffff8b1ebf803e78] qla24xx_msix_rsp_q at ffffffffc04ff01b [qla2xxx]
14 [ffff8b1ebf803eb0] __handle_irq_event_percpu at ffffffffafd50714
Link: https://lore.kernel.org/r/20210908164622.19240-10-njavali@marvell.com
Fixes: f45bca8c5052 ("scsi: qla2xxx: Fix double scsi_done for abort path")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Co-developed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3ef68d4f0c9e7cb589ae8b70f07d77f528105331 upstream.
Kernel crashes when accessing port_speed sysfs file. The issue happens on
a CNA when the local array was accessed beyond bounds. Fix this by changing
the lookup.
BUG: unable to handle kernel paging request at 0000000000004000
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 15 PID: 455213 Comm: sosreport Kdump: loaded Not tainted
4.18.0-305.7.1.el8_4.x86_64 #1
RIP: 0010:string_nocheck+0x12/0x70
Code: 00 00 4c 89 e2 be 20 00 00 00 48 89 ef e8 86 9a 00 00 4c 01
e3 eb 81 90 49 89 f2 48 89 ce 48 89 f8 48 c1 fe 30 66 85 f6 74 4f <44> 0f b6 0a
45 84 c9 74 46 83 ee 01 41 b8 01 00 00 00 48 8d 7c 37
RSP: 0018:ffffb5141c1afcf0 EFLAGS: 00010286
RAX: ffff8bf4009f8000 RBX: ffff8bf4009f9000 RCX: ffff0a00ffffff04
RDX: 0000000000004000 RSI: ffffffffffffffff RDI: ffff8bf4009f8000
RBP: 0000000000004000 R08: 0000000000000001 R09: ffffb5141c1afb84
R10: ffff8bf4009f9000 R11: ffffb5141c1afce6 R12: ffff0a00ffffff04
R13: ffffffffc08e21aa R14: 0000000000001000 R15: ffffffffc08e21aa
FS: 00007fc4ebfff700(0000) GS:ffff8c717f7c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000004000 CR3: 000000edfdee6006 CR4: 00000000001706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
string+0x40/0x50
vsnprintf+0x33c/0x520
scnprintf+0x4d/0x90
qla2x00_port_speed_show+0xb5/0x100 [qla2xxx]
dev_attr_show+0x1c/0x40
sysfs_kf_seq_show+0x9b/0x100
seq_read+0x153/0x410
vfs_read+0x91/0x140
ksys_read+0x4f/0xb0
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
Link: https://lore.kernel.org/r/20210908164622.19240-7-njavali@marvell.com
Fixes: 4910b524ac9e ("scsi: qla2xxx: Add support for setting port speed")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 703535e6ae1e94c89a9c1396b4c7b6b41160ef0c upstream.
No need to deduce command size in scsi_setup_scsi_cmnd() anymore as
appropriate checks have been added to scsi_fill_sghdr_rq() function and the
cmd_len should never be zero here. The code to do that wasn't correct
anyway, as it used uninitialized cmd->cmnd, which caused a null-ptr-deref
if the command size was zero as in the trace below. Fix this by removing
the unneeded code.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 1822 Comm: repro Not tainted 5.15.0 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
Call Trace:
blk_mq_dispatch_rq_list+0x7c7/0x12d0
__blk_mq_sched_dispatch_requests+0x244/0x380
blk_mq_sched_dispatch_requests+0xf0/0x160
__blk_mq_run_hw_queue+0xe8/0x160
__blk_mq_delay_run_hw_queue+0x252/0x5d0
blk_mq_run_hw_queue+0x1dd/0x3b0
blk_mq_sched_insert_request+0x1ff/0x3e0
blk_execute_rq_nowait+0x173/0x1e0
blk_execute_rq+0x15c/0x540
sg_io+0x97c/0x1370
scsi_ioctl+0xe16/0x28e0
sd_ioctl+0x134/0x170
blkdev_ioctl+0x362/0x6e0
block_ioctl+0xb0/0xf0
vfs_ioctl+0xa7/0xf0
do_syscall_64+0x3d/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
---[ end trace 8b086e334adef6d2 ]---
Kernel panic - not syncing: Fatal exception
Link: https://lore.kernel.org/r/20211103170659.22151-2-tadeusz.struk@linaro.org
Fixes: 2ceda20f0a99 ("scsi: core: Move command size detection out of the fast path")
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: <linux-scsi@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Cc: <stable@vger.kernel.org> # 5.15, 5.14, 5.10
Reported-by: syzbot+5516b30f5401d4dcbcae@syzkaller.appspotmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f2b85040acec9a928b4eb1b57a989324e8e38d3f upstream.
SCSI host release is triggered when SCSI device is freed. We have to make
sure that the low-level device driver module won't be unloaded before SCSI
host instance is released because shost->hostt is required in the release
handler.
Make sure to put LLD module refcnt after SCSI device is released.
Fixes a kernel panic of 'BUG: unable to handle page fault for address'
reported by Changhui and Yi.
Link: https://lore.kernel.org/r/20211008050118.1440686-1-ming.lei@redhat.com
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Changhui Zhong <czhong@redhat.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 282da7cef078a87b6d5e8ceba8b17e428cf0e37c ]
PA_PWRMODEUSERDATA0 -> DL_FC0PROTTIMEOUTVAL
PA_PWRMODEUSERDATA1 -> DL_TC0REPLAYTIMEOUTVAL
PA_PWRMODEUSERDATA2 -> DL_AFC0REQTIMEOUTVAL
Link: https://lore.kernel.org/r/20211018062841.18226-1-chanho61.park@samsung.com
Fixes: a967ddb22d94 ("scsi: ufs: ufs-exynos: Apply vendor-specific values for three timeouts")
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 50b6cb3516365cb69753b006be2b61c966b70588 upstream.
After commit ea2f0f77538c ("scsi: core: Cap scsi_host cmd_per_lun at
can_queue"), a 416-CPU VM running on Hyper-V hangs during boot because the
hv_storvsc driver sets scsi_driver.can_queue to an integer value that
exceeds SHRT_MAX, and hence scsi_add_host_with_dma() sets
shost->cmd_per_lun to a negative "short" value.
Use min_t(int, ...) to work around the issue.
Link: https://lore.kernel.org/r/20211008043546.6006-1-decui@microsoft.com
Fixes: ea2f0f77538c ("scsi: core: Cap scsi_host cmd_per_lun at can_queue")
Cc: stable@vger.kernel.org
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7fb223d0ad801f633c78cbe42b1d1b55f5d163ad ]
Commit 8c0eb596baa5 ("[SCSI] qla2xxx: Fix a memory leak in an error path of
qla2x00_process_els()"), intended to change:
bsg_job->request->msgcode == FC_BSG_HST_ELS_NOLOGIN
to:
bsg_job->request->msgcode != FC_BSG_RPT_ELS
but changed it to:
bsg_job->request->msgcode == FC_BSG_RPT_ELS
instead.
Change the == to a != to avoid leaking the fcport structure or freeing
unallocated memory.
Link: https://lore.kernel.org/r/20211012191834.90306-2-jgu@purestorage.com
Fixes: 8c0eb596baa5 ("[SCSI] qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Joy Gu <jgu@purestorage.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 187a580c9e7895978dcd1e627b9c9e7e3d13ca96 ]
In commit 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and
sync thread") we meant to add a check where before we call ->set_param() we
make sure the iscsi_cls_connection is bound. The problem is that between
versions 4 and 5 of the patch the deletion of the unchecked set_param()
call was dropped so we ended up with 2 calls. As a result we can still hit
a crash where we access the unbound connection on the first call.
This patch removes that first call.
Fixes: 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread")
Link: https://lore.kernel.org/r/20211010161904.60471-1-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Li Feng <fengli@smartx.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cced4c0ec7c06f5230a2958907a409c849762293 ]
There are a couple of spelling mistakes in pr_info and pr_err messages.
Fix them.
Link: https://lore.kernel.org/r/20210924230330.143785-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dd689ed5aa905daf4ba4c99319a52aad6ea0a796 ]
Fix the following coccicheck warning:
./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared
with zero: result > 0.
Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fbdac19e642899455b4e64c63aafe2325df7aafa ]
Setting SCSI logging level with error=3, we saw some errors from enclosues:
[108017.360833] ses 0:0:9:0: tag#641 Done: NEEDS_RETRY Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[108017.360838] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427778] ses 0:0:9:0: Power-on or device reset occurred
[108017.427784] ses 0:0:9:0: tag#641 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[108017.427788] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427791] ses 0:0:9:0: tag#641 Sense Key : Unit Attention [current]
[108017.427793] ses 0:0:9:0: tag#641 Add. Sense: Bus device reset function occurred
[108017.427801] ses 0:0:9:0: Failed to get diagnostic page 0x1
[108017.427804] ses 0:0:9:0: Failed to bind enclosure -19
[108017.427895] ses 0:0:10:0: Attached Enclosure device
[108017.427942] ses 0:0:10:0: Attached scsi generic sg18 type 13
Retry if the Send/Receive Diagnostic commands complete with a transient
error status (NOT_READY or UNIT_ATTENTION with ASC 0x29).
Link: https://lore.kernel.org/r/1631849061-10210-2-git-send-email-wenxiong@linux.ibm.com
Reviewed-by: Brian King <brking@linux.ibm.com>
Reviewed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 265dfe8ebbabae7959060bd1c3f75c2473b697ed ]
After a device is initialized via device_initialize() it should be freed
via put_device(). sd_probe() currently gets this wrong, fix it up.
Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 79a7482249a7353bc86aff8127954d5febf02472 ]
Both cxgb4 and csiostor drivers run on their own independent Physical
Function. But when cxgb4 and csiostor are both being loaded in parallel via
modprobe, there is a race when firmware upgrade is attempted by both the
drivers.
When the cxgb4 driver initiates the firmware upgrade, it halts the firmware
and the chip until upgrade is complete. When the csiostor driver is coming
up in parallel, the firmware mailbox communication fails with timeouts and
the csiostor driver probe fails.
Add a module soft dependency on cxgb4 driver to ensure loading csiostor
triggers cxgb4 to load first when available to avoid the firmware upgrade
race.
Link: https://lore.kernel.org/r/1632759248-15382-1-git-send-email-rahul.lakkireddy@chelsio.com
Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e8c2da7e329ce004fee748b921e4c765dc2fa338 upstream.
Fix incorrect index for UTMRD reference in ufshcd_add_tm_upiu_trace().
Link: https://lore.kernel.org/r/20210924085848.25500-1-jonathan.hsu@mediatek.com
Fixes: 4b42d557a8ad ("scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs")
Cc: stable@vger.kernel.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jonathan Hsu <jonathan.hsu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4a0a542fe5e4273baf9228459ef3f75c29490cba ]
The MSI-X and MSI calls fails in kdump kernel. Because of this
qla2xxx_create_qpair() fails leading to .create_queue callback failure.
The fix is to return existing qpair instead of allocating new one and
allocate a single hw queue.
[ 19.975838] qla2xxx [0000:d8:00.1]-00c7:11: MSI-X: Failed to enable support,
giving up -- 16/-28.
[ 19.984885] qla2xxx [0000:d8:00.1]-0037:11: Falling back-to MSI mode --
ret=-28.
[ 19.992278] qla2xxx [0000:d8:00.1]-0039:11: Falling back-to INTa mode --
ret=-28.
..
..
..
[ 21.141518] qla2xxx [0000:d8:00.0]-2104:2: qla_nvme_alloc_queue: handle
00000000e7ee499d, idx =1, qsize 32
[ 21.151166] qla2xxx [0000:d8:00.0]-0181:2: FW/Driver is not multi-queue capable.
[ 21.158558] qla2xxx [0000:d8:00.0]-2122:2: Failed to allocate qpair
[ 21.164824] nvme nvme0: NVME-FC{0}: reset: Reconnect attempt failed (-22)
[ 21.171612] nvme nvme0: NVME-FC{0}: Reconnect attempt in 2 seconds
Link: https://lore.kernel.org/r/20210810043720.1137-13-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6dacc371b77f473770ec646e220303a84fe96c11 ]
The limit should be "PAGE_SIZE - len" instead of "PAGE_SIZE". We're not
going to hit the limit so this fix will not affect runtime.
Link: https://lore.kernel.org/r/20210916132331.GE25094@kili
Fixes: 5b9e70b22cc5 ("scsi: lpfc: raise sg count for nvme to use available sg resources")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5f8579038842d77e6ce05e1df6bf9dd493b0e3ef ]
In dual mode in case of disabling the target, the whole port goes offline
and initiator is turned off too.
Fix restoring initiator mode after disabling target in dual mode.
Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com
Fixes: 0645cb8350cd ("scsi: qla2xxx: Add mode control for each physical port")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4e28550829258f7dab97383acaa477bd724c0ff4 ]
ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of
iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call
into the driver, we might not match and return that we don't want attr
visible in sysfs. Found in code review.
Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com
Fixes: e746f3451ec7 ("scsi: iscsi: Fix iface sysfs attr detection")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
