summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2006-04-11[PATCH] sata_sil24: fix timeout calculation in sil24_softresetTejun Heo1-1/+1
sil24_softreset calculated timeout by adding ATA_TMOUT_BOOT * HZ to jiffies; however, as ATA_TMOUT_BOOT is already in jiffies, multiplying by HZ makes the value way off. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11[PATCH] libata: make reset methods complain when they failTejun Heo2-4/+6
Make reset methods complain loud when they fail. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11[PATCH] libata: kill @verbose from ata_reset_fn_tTejun Heo4-41/+22
@verbose was added to ata_reset_fn_t because AHCI complained during probing if no device was attached to the port. However, muting failure message isn't the correct approach. Reset methods are responsible for detecting no device condition and finishing successfully. Now that AHCI softreset is fixed, kill @verbose. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11[PATCH] libata: set default cbl in probeinitTejun Heo1-5/+5
Make setting CBL type responsibility of probeinit. This allows using only ap->cbl == ATA_CBL_SATA test in all other parts. Without this, ata_down_sata_spd_limit() doesn't work during probe reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11libata: Add helper ata_shost_to_port()Jeff Garzik4-9/+9
2006-04-11libata: Fix EH merge difference between this branch and upstream.Jeff Garzik2-2/+2
2006-04-11Merge branch 'master'Jeff Garzik19-29/+6
Conflicts: drivers/scsi/libata-scsi.c include/linux/libata.h
2006-04-11[PATCH] 3ware: kmap_atomic() fixAndrew Morton1-0/+3
We must disable local IRQs while holding KM_IRQ0 or KM_IRQ1. Otherwise, an IRQ handler could use those kmap slots while this code is using them, resulting in memory corruption. Thanks to Nick Orlov <bugfixer@list.ru> for reporting. Cc: <linuxraid@amcc.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-10[libata] sata_mv: fix can_queue line accidentally removed in scsi-eh patchJeff Garzik1-0/+1
2006-04-10[PATCH] move ->eh_strategy_handler to the transport classChristoph Hellwig20-37/+5
Overriding the whole EH code is a per-transport, not per-host thing. Move ->eh_strategy_handler to the transport class, same as ->eh_timed_out. Downside is that scsi_host_alloc can't check for the total lack of EH anymore, but the transition period from old EH where we needed it is long gone already. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-04[PATCH] ahci: do not fail softreset if PHY reports no deviceTejun Heo1-0/+6
All softreset methods are responsible for detecting device presence and succeed softreset in such cases. AHCI didn't use to check for device presence before proceeding with softreset and this caused unnecessary reset retrials during probing. This patch adds presence detection to AHCI softreset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-04[PATCH] libata: convert ATAPI_ENABLE_DMADIR to module parameterAlbert Lee3-4/+7
Convert the ATAPI_ENABLE_DMADIR compile time option needed by some SATA-PATA bridge to runtime module parameter. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-04Merge branch 'master'Jeff Garzik8-447/+227
2006-04-03[libata] bump versionsJeff Garzik13-13/+13
2006-04-03[libata] kill bogus cut-n-pasted comments in three driversJeff Garzik3-12/+0
2006-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (48 commits) Documentation: fix minor kernel-doc warnings BUG_ON() Conversion in drivers/net/ BUG_ON() Conversion in drivers/s390/net/lcs.c BUG_ON() Conversion in mm/slab.c BUG_ON() Conversion in mm/highmem.c BUG_ON() Conversion in kernel/signal.c BUG_ON() Conversion in kernel/signal.c BUG_ON() Conversion in kernel/ptrace.c BUG_ON() Conversion in ipc/shm.c BUG_ON() Conversion in fs/freevxfs/ BUG_ON() Conversion in fs/udf/ BUG_ON() Conversion in fs/sysv/ BUG_ON() Conversion in fs/inode.c BUG_ON() Conversion in fs/fcntl.c BUG_ON() Conversion in fs/dquot.c BUG_ON() Conversion in md/raid10.c BUG_ON() Conversion in md/raid6main.c BUG_ON() Conversion in md/raid5.c Fix minor documentation typo BFP->BPF in Documentation/networking/tuntap.txt ...
2006-04-02Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds6-441/+221
* master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (33 commits) [PATCH] pcmcia: declare pccard_iodyn_ops (fix m8xx_pcmcia.c compilation error) [PATCH] pcmcia: fix pcmcia_device_remove oops [PATCH] pcmcia: Add support for Possio GCC AKA PCMCIA Siemens MC45 [PATCH] pcmcia: pseudo device handling update [PATCH] pcmcia: convert DEV_OK to pcmcia_dev_present [PATCH] pcmcia: use bitfield instead of p_state and state [PATCH] pcmcia: remove unused p_dev->state flags [PATCH] pcmcia: make pcmcia_release_{io,irq} static [PATCH] pcmcia: add return value to _config() functions [PATCH] pcmcia: remove dev_link_t and client_handle_t indirection [PATCH] pcmcia: embed dev_link_t into struct pcmcia_device [PATCH] pcmcia: rename pcmcia_device.state [PATCH] pcmcia: remove unneeded Vcc pseudo setting [PATCH] pcmcia: remove export of pcmcia_release_configuration [PATCH] pcmcia: default suspend and resume handling [PATCH] pcmcia: convert remaining users of pcmcia_release_io and _irq [PATCH] pcmcia: add pcmcia_disable_device [PATCH] serial_cs: add Merlin U630 IDs [PATCH] pcmcia: AT91RM9200 Compact Flash driver [PATCH] pcmcia: socket.functions starts with 1 ...
2006-04-02[PATCH] libata: print SControl in SATA link status info messageTejun Heo1-5/+8
Now that libata mangles with SControl, it's helpful to print out SControl in link status message. Add it. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: make some libata-core routines externTejun Heo2-17/+25
Make libata-core routines which will be used by EH implementation extern. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: separate out libata-eh.cTejun Heo5-229/+273
A lot of EH codes are about to be added to libata. Separate out libata-eh.c. ata_scsi_timed_out(), ata_scsi_error(), ata_qc_timeout(), ata_eng_timeout(), ata_eh_qc_complete() and ata_eh_qc_retry() are moved. No code is changed by this patch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: dec scmd->retries for qcs with zero err_maskTejun Heo1-2/+5
qcs might get retried because of unrelated failure. e.g. NCQ command failure causes the whole command set to be aborted. Decrement scmd->retries for such retrials to avoid unnecessarily failing commands. Note that scmd->retries will be incremented the first time. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: add @cdb to ata_exec_internal()Tejun Heo1-5/+8
Add @cdb to ata_exec_internal(). It will be used by new EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: don't read TF directly from sense generation functionsTejun Heo1-18/+9
TF register might not be directly accessible depending on errors. e.g. TF of failed NCQ command is in log page 10h. Make reading TF responsibility of error handlers. For the current EH, simply push TF reading into qc completion functions as they are practically part of EH. New EH will fill qc->tf with status registers before complting qcs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: always generate sense if qc->err_mask is non-zeroTejun Heo1-2/+4
Current sense generation code does not generate sense error if status register value doesn't indicate error condition. However, LLDD's may indicate errors which 't show up in status register. Completing such qc's without generating sense results in successful completion of failed commands. Invoke ata_to_sense_error() regardless of status register if qc->err_mask is not zero such that ata_to_sense_error() generates default sense error. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: pass qc around intead of ap during PIOTejun Heo1-45/+26
The current code passes pointer to ap around and repeatedly performs ata_qc_from_tag() to access the ongoing qc. This is unnatural and makes EH synchronization cumbersome. Make PIO codes deal with qc instead of ap. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: add ATA_QCFLAG_IOTejun Heo1-0/+1
Add a new qc flag ATA_QCFLAG_IO. This flag gets set for normal IO commands originating from SCSI midlayer. This information will be used by EH to determine transfer speed reconfiguration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: clear ATA_DFLAG_PIO before setting itTejun Heo1-0/+1
ata_dev_set_mode() is now responsible for managing ATA_DFLAG_PIO. Clear it before setting it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: clear only affected flags during ata_dev_configure()Tejun Heo1-1/+1
ata_dev_configure() should not clear dynamic device flags determined elsewhere. Lower eight bits are reserved for feature flags, define ATA_DFLAG_CFG_MASK and clear only those bits before configuring device. Without this patch, ATA_DFLAG_PIO gets turned off during revalidation making PIO mode unuseable. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLEDTejun Heo10-20/+20
Rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED for consistency. (ATA_FLAG_* are always about ports). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: ATA_FLAG_IN_EH is not used, kill itTejun Heo1-13/+4
Kill unused flag ATA_FLAG_IN_EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: ata_dev_revalidate() printk updateTejun Heo1-13/+10
Make sure ata_dev_revalidate() complains on failures and kill revalidation failure message printed from ata_dev_set_mode(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: report device number when PIO failsTejun Heo1-1/+2
Report device number on PIO failure. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: consider disabled devices in ata_dev_xfermask()Tejun Heo1-11/+23
ata_bus_probe() now marks failed devices properly and leaves meaningful transfer mode masks. This patch makes ata_dev_xfermask() consider disable devices when determining PIO mode to avoid violating device selection timing. While at it, move port-wide resttriction out of device iteration loop and try to make the function look a bit prettier. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: improve ata_bus_probe()Tejun Heo1-16/+49
Improve ata_bus_probe() such that configuration failures are handled better. Each device is given ATA_PROBE_MAX_TRIES chances, but any non-transient error (revalidation failure with -ENODEV, configuration failure with -EINVAL...) disables the device directly. Any IO error results in SATA PHY speed down and ata_set_mode() failure lowers transfer mode. The last try always puts a device into PIO-0. After each failure, the whole port is reset to make sure that the controller and all the devices are in a known and stable state. The reset also applies SATA SPD configuration if necessary. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: implement ata_down_xfermask_limit()Tejun Heo1-0/+52
Implement ata_down_xfermask_limit(). This function manipulates @dev->pio/mwdma/udma_mask such that the next lower transfer mode is selected. This will be used to improve ata_bus_probe() failure handling and later by EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: add 5s sleep between resetsTejun Heo1-1/+14
Some devices react badly if resets are performed back-to-back. Give devices some time to breath and tell user that we're taking a nap. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: use SATA speed down in ata_drive_probe_reset()Tejun Heo1-4/+12
Make ata_drive_probe_reset() use SATA SPD configuration. Hardreset will be force if speed renegotiation is necessary. Also, if a hardreset fails, PHY speed is stepped down and hardreset is retried until the lowest speed is reached. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: implement ap->sata_spd_limit and helpersTejun Heo1-4/+139
ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-01[PATCH] libata: preserve SATA SPD setting over hard resetsTejun Heo1-3/+9
Don't overwrite SPD setting during hard reset. This change has the (intended) side effect of honoring the BIOS configuration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-01[PATCH] libata: don't disable devices from ata_set_mode()Tejun Heo1-26/+40
When ata_set_mode() fails on a device, make ata_set_mode() return error code and pointer to the device instead of disabling it directly. This gives more control to higher level driving logic. This patch does not change the end result (configured transfer mode) although it may make libata repeat mode configuration to the peer of a failing device. Later ata_bus_probe() rewrite will make full use of this change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-01[PATCH] libata: reorganize ata_set_mode()Tejun Heo1-56/+35
Merge ata_host_set_pio() and ata_host_set_dma() into ata_set_mode() and use function-level *dev to iterate over devices. This eases soon-to-follow ata_set_mode() interface change. While at it, kill an unnecessary comment and normalize others. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-01[PATCH] libata: make ata_set_mode() handle no-device case properlyTejun Heo1-1/+4
Make ata_set_mode() return without doing anything if there is no device on the port. This is in preparation for ata_bus_probe() changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-01[PATCH] libata: implement ata_dev_enabled and disabled()Tejun Heo4-16/+16
This patch renames ata_dev_present() to ata_dev_enabled() and adds ata_dev_disabled(). This is to discern the state where a device is present but disabled from not-present state. This disctinction is necessary when configuring transfer mode because device selection timing must not be violated even if a device fails to configure. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-01[PATCH] libata: convert do_probe_reset() to ata_do_reset()Tejun Heo1-13/+16
Make do_probe_reset() generic by pushing classification check into ata_drive_probe_reset() and rename it to ata_do_reset(). This will be used by EH reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-01[PATCH] libata: separate out ata_spd_string()Tejun Heo1-9/+14
Separate out ata_spd_string() from sata_print_link_status(). This will be used by SATA spd configuration routines. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-01[PATCH] libata: make ata_bus_probe() return negative errno on failureTejun Heo1-3/+3
ata_bus_probe() uses unsigned int rc to receive negative errno and returns the converted unsigned int value. Convert temporary variables to int and make ata_bus_probe() return negative errno on failure. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-01[PATCH] libata: fix ata_set_mode() return valueTejun Heo1-1/+2
Make ata_set_mode() return correct error value when ata_dev_set_mode() fails. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-01[PATCH] powerpc/pseries: Change H_StudlyCaps to H_SHOUTING_CAPSSegher Boessenkool1-5/+5
Also cleans up some nearby whitespace problems. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-01fix a typo in the AIC7XXX_DEBUG_MASK help textAdrian Bunk1-1/+1
This patch fixes a typo in the AIC7XXX_DEBUG_MASK help text. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-01Merge branch 'upstream-linus' of ↵Linus Torvalds5-24/+22
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] libata: fix ata_xfer_tbl termination [PATCH] libata: make ata_qc_issue complete failed qcs [PATCH] libata: fix ata_qc_issue failure path [PATCH] ata_piix: fix ich6/m_map_db [libata] ahci: add ATI SB600 PCI IDs
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-06 05:42:47 +0300