summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2005-06-09[PATCH] sata_svw: bump version numberNarendra Sankar1-1/+1
Bump sata_svw.c version number to indicate support for BCM5785(HT1000) Southbridge SATA controller. Signed-off-by: Narendra Sankar <nsankar@broadcom.com> diff -uNr linux-2.6.12-rc5/drivers/scsi/sata_svw.c linux-2.6.12-rc5.brcm/drivers/scsi/sata_svw.c
2005-06-04[libata] ahci: finish ATAPI support (hopefully)Jeff Garzik1-12/+8
2005-06-04Merge of /spare/repo/libata-dev branch bridge-detect1-2/+33
2005-06-04Automatic merge of /spare/repo/libata-dev branch svw1-9/+16
2005-06-04Merge of /spare/repo/libata-dev branch pdc206191-1/+25
2005-06-04Automatic merge of /spare/repo/libata-dev branch ahci-msi1-13/+67
2005-06-04[libata] ahci: minor PCI MSI cleanupJeff Garzik1-5/+6
Replace 'have_msi' variable with a bit in the existing 'flags' variable,. AHCI_FLAG_MSI.
2005-06-04Automatic merge of /spare/repo/linux-2.6/.git branch HEAD26-1436/+1073
2005-06-04Automatic merge of /spare/repo/linux-2.6/.git branch HEAD26-1436/+1073
2005-06-03Automatic merge of rsync://www.parisc-linux.org/~jejb/git/scsi-for-linus-2.6Linus Torvalds2-11/+14
2005-06-03[SCSI] fix slab corruption during ipr probeNathan Lynch1-0/+1
With CONFIG_DEBUG_SLAB=y I see slab corruption messages during boot on pSeries machines with IPR adapters with any 2.6.12-rc kernel. The change which seems to have introduced the problem is "SCSI: revamp target scanning routines" and may be found at: http://marc.theaimsgroup.com/?l=bk-commits-head&m=111093946426333&w=2 In order to revert that in a 2.6.12-rc1 tree, I had to revert "target code updates to support scanned targets" first: http://marc.theaimsgroup.com/?l=bk-commits-head&m=111094132524649&w=2 With both patches reverted, the corruption messages go away. ipr: IBM Power RAID SCSI Device Driver version: 2.0.13 (February 21, 2005) ipr 0001:d0:01.0: Found IOA with IRQ: 167 ipr 0001:d0:01.0: Starting IOA initialization sequence. ipr 0001:d0:01.0: Adapter firmware version: 020A005C ipr 0001:d0:01.0: IOA initialized. scsi0 : IBM 570B Storage Adapter Vendor: IBM Model: VSBPD4E1 U4SCSI Rev: 4770 Type: Enclosure ANSI SCSI revision: 02 Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF Type: Direct-Access ANSI SCSI revision: 04 Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF Type: Direct-Access ANSI SCSI revision: 04 Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF Type: Direct-Access ANSI SCSI revision: 04 Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF Type: Direct-Access ANSI SCSI revision: 04 Vendor: IBM Model: VSBPD4E1 U4SCSI Rev: 4770 Type: Enclosure ANSI SCSI revision: 02 Slab corruption: start=c0000001e8de5268, len=512 Redzone: 0x5a2cf071/0x5a2cf071. Last user: [<c00000000029c3a0>](.scsi_target_dev_release+0x28/0x50) 080: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6a Prev obj: start=c0000001e8de5050, len=512 Redzone: 0x5a2cf071/0x5a2cf071. Last user: [<0000000000000000>](0x0) 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Next obj: start=c0000001e8de5480, len=512 Redzone: 0x170fc2a5/0x170fc2a5. Last user: [<c000000000228d7c>](.as_init_queue+0x5c/0x228) 000: c0 00 00 01 e8 83 26 08 00 00 00 00 00 00 00 00 010: 00 00 00 00 00 00 00 00 c0 00 00 01 e8 de 54 98 Slab corruption: start=c0000001e8de5268, len=512 Redzone: 0x5a2cf071/0x5a2cf071. Last user: [<c00000000029c3a0>](.scsi_target_dev_release+0x28/0x50) 080: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6a Prev obj: start=c0000001e8de5050, len=512 Redzone: 0x5a2cf071/0x5a2cf071. Last user: [<0000000000000000>](0x0) 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Next obj: start=c0000001e8de5480, len=512 Redzone: 0x170fc2a5/0x170fc2a5. Last user: [<c000000000228d7c>](.as_init_queue+0x5c/0x228) 000: c0 00 00 01 e8 83 26 08 00 00 00 00 00 00 00 00 010: 00 00 00 00 00 00 00 00 c0 00 00 01 e8 de 54 98 ... I did some digging and the problem seems to be a refcounting issue in __scsi_add_device. The target gets freed in scsi_target_reap, and then __scsi_add_device tries to do another device_put on it. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-03[SCSI] qla2xxx: fix bad locking during eh_abortAndrew Vasquez1-11/+13
Correct incorrect locking order in qla2xxx_eh_abort() handler which would case a hang during certain code-paths. With extra pieces to fix the irq state in the locks. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-03Automatic merge of /spare/repo/linux-2.6/.git branch HEAD15-6/+32
2005-06-03libata: kernel-doc warning fixesJeff Garzik1-3/+3
2005-06-03libata: update inline source docsEdward Falk1-7/+276
2005-05-31[libata] ahci: Update for recent ->host_stop() API changeJeff Garzik1-4/+4
2005-05-31Automatic merge of ↵16-48/+89
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git branch HEAD
2005-05-31libata: doc updatesJeff Garzik3-50/+118
2005-05-30libata: more doc updatesJeff Garzik1-13/+44
Document recently-added ata_port_operations hooks. Fill several doc stubs in libata-core.c.
2005-05-30Automatic merge of 'misc-fixes' branch fromLinus Torvalds14-5/+31
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-05-29libata: bump versionJeff Garzik1-1/+1
2005-05-29Automatic merge of /spare/repo/netdev-2.6 branch use-after-unmap13-4/+28
2005-05-28[PATCH] swsusp: ahd_dv_0 can't be stoppedShaohua Li1-1/+1
This driver wants to set PF_NOFREEZE. Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-28[PATCH] drivers/scsi/ahci: add #include req'd for the DMA_{64,32}BIT_MASK ↵domen@coderock.org1-0/+1
constants The previous patch did not compile cleanly on all architectures so here's a fixed one which #includes <linux/dma-mapping.h>. Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() This patch includes dma-mapping.h explicitly because it caused errors on some architectures otherwise. See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org> diff -puN drivers/scsi/ahci.c~dma_mask-drivers_scsi_ahci drivers/scsi/ahci.c
2005-05-28[PATCH] drivers/scsi/sata_vsc: add #include req'd for DMA_32BIT_MASK constantdomen@coderock.org1-0/+1
The previous patch did not compile cleanly on all architectures so here's a fixed one which #includes <linux/dma-mapping.h>. Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() This patch includes dma-mapping.h explicitly because it caused errors on some architectures otherwise. See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org> diff -puN drivers/scsi/sata_vsc.c~dma_mask-drivers_scsi_sata_vsc drivers/scsi/sata_vsc.c
2005-05-27libata: Fix use-after-iounmapJeff Garzik13-4/+28
Jens Axboe pointed out that the iounmap() call in libata was occurring too early, and some drivers (ahci, probably others) were using ioremap'd memory after it had been unmapped. The patch should address that problem by way of improving the libata driver API: * move ->host_stop() call after all ->port_stop() calls have occurred. * create default helper function ata_host_stop(), and move iounmap() call there. * add ->host_stop_prewalk() hook, use it in sata_qstor.c (hi Mark). sata_qstor appears to require the host-stop-before-port-stop ordering that existed prior to applying the attached patch.
2005-05-26Automatic merge of ↵12-1317/+542
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git branch HEAD
2005-05-26Merge of 'misc-fixes' branch fromLinus Torvalds1-6/+7
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-05-26[PATCH] ide-scsi: kmap scatter/gather before doing PIO Stuart Hayes1-4/+24
From: Stuart Hayes <Stuart_Hayes@dell.com> The system can panic with a null pointer dereference using ide-scsi if PIO is being done on scatter gather pages that are in high memory, because page_address() returns 0. We are actually seeing this using a tape drive. This patch will kmap_atomic() the pages before performing PIO. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-05-26[PATCH] convert IDE device drivers to driver-modelBartlomiej Zolnierkiewicz1-32/+26
* add ide_bus_match() and export ide_bus_type * split ide_remove_driver_from_hwgroup() out of ide_unregister() * move device cleanup from ide_unregister() to drive_release_dev() * convert ide_driver_t->name to driver->name * convert ide_driver_t->{attach,cleanup} to driver->{probe,remove} * remove ide_driver_t->busy as ide_bus_type->subsys.rwsem protects against concurrent ->{probe,remove} calls * make ide_{un}register_driver() void as it cannot fail now * use driver_{un}register() directly, remove ide_{un}register_driver() * use device_register() instead of ata_attach(), remove ata_attach() * add proc_print_driver() and ide_drivers_show(), remove ide_drivers_op * fix ide_replace_subdriver() and move it to ide-proc.c * remove ide_driver_t->drives, ide_drives and drives_lock * remove ide_driver_t->drivers, drivers and drivers_lock * remove ide_drive_t->driver and DRIVER() macro Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-05-26[PATCH] libata: Fix zero sg_dma_len() on 64-bit platformAlbert Lee1-6/+7
When testing ATAPI PIO data transfer on the ppc64 platform, __atapi_pio_bytes() got zero when sg_dma_len() is used. I checked the <asm-ppc64/scatterlish.h>, the struct scatterlist is defined as: struct scatterlist { struct page *page; unsigned int offset; unsigned int length; /* For TCE support */ u32 dma_address; u32 dma_length; }; #define sg_dma_address(sg) ((sg)->dma_address) #define sg_dma_len(sg) ((sg)->dma_length) So, if the scatterlist is not DMA mapped, sg_dma_len() will return zero on ppc64. The same problem should occur on the x86-64 platform. On the i386 platform, sg_dma_len() returns sg->length, that's why the problem does not occur on an i386. Changes: - Use sg->length if the scatterlist is not DMA mapped (yet). Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
2005-05-26[PATCH] sata_svw: Add support for new device IDsNarendra Sankar1-9/+16
BCM5785 (HT1000) is a new southbridge from Serverworks/Broadcom that incorporates 4 SATA ports in a single PCIX function. Functionally these ports are similar to that in older devices like the Apple K2 and the Frodo4/8. This patch adds support for the new PCI device ID along with a blurb on what the various device IDs mean. Additionally in all devices based on this SATA controller, the SATA ports appear as a single PCI function. This is true for older Frodo8 devices as well. Hence the init function should init all the ports present in the detected controller (which could be 4 or 8). Signed-off-by: Narendra Sankar <nsankar@broadcom.com>
2005-05-26[PATCH] sata_promise: add PCI ID for FastTrak TX2200 2-portsFrancisco Javier1-0/+2
2005-05-26[PATCH] sata_sil: new ID 1002:437A for ATI IXP400NAKAMURA Kenta1-0/+1
2005-05-25[PATCH] aic7xxx_osm build fixAndrew Morton1-2/+5
Fix a c99ism. Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-21Automatic merge of rsync://www.parisc-linux.org/~jejb/git/scsi-for-linus-2.6.gitLinus Torvalds7-1310/+524
2005-05-21[SCSI] aic7xxx: fix U160 modeJames Bottomley1-0/+11
The new period/dt setting routines don't get the coupling of these parameters correct. This means that Domain Validation never gets DT set, and thus the drive gets restricted to U80. Fix this by restoring the couplings in the set routines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-21[SCSI] aic7xxx: add back lockingJames Bottomley1-4/+11
Tampering with the settings has to be done under the host lock ... slave_alloc isn't called under any lock, so this has to be done explicitly. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-21[SCSI] aic7xxx: make correct use of slave_alloc/destroy and remove the per ↵James Bottomley2-112/+79
device timer The allocation of all of our components should be done in slave alloc. Currently it's rather fancifully refcounted in the queuecommand callback. This patch moves allocation and destroy to their correct places in slave_alloc/slave_destory. Now we can guarantee that everywhere a device is requested, it's actually been allocated, so don't check for this anymore. Additionally, the per device busy timer was the only source of potential use after free. It's been deleted because Linux does the correct thing with busy returns, so there's no need to implement a separate timer in the driver. Finally, implement code that forces all the device parameters to zero (i.e. async and narrow) in the slave alloc, inform the spi class of the bios recorded maximums and wait until slave configure before trying anything more adventurous. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-21[SCSI] aic7xxx: remove the completeqJames Bottomley2-133/+5
This should finish the spurious queue removal from aic7xxx (there are other queues that are probably unnecessary, but at least the major and obviously unnecessary ones are done with). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-21[SCSI] aic7xxx: remove the last vestiges of the runqJames Bottomley2-7/+0
This was rendered obsolete by the busyq removal; remove some of the last remnants of its presence. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-21[SCSI] aic7xxx: remove usage of obsolete typedefsChristoph Hellwig3-51/+38
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-21[SCSI] remove dma_mask hacksChristoph Hellwig3-46/+6
pci_alloc_consistent is under 4G by default. Also simplify the definition of bus_dmamap_t. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-21[SCSI] aic7xxx: remove Linux 2.4 ifdefsChristoph Hellwig5-472/+5
There's not much sense in sharing code anymore now that aic7xxx uses various transport class facilities. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-21[SCSI] aic7xxx: remove some DV leftoversChristoph Hellwig1-6/+0
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-21[SCSI] remove aic7xxx busyqJames Bottomley2-438/+191
The aic7xxx driver has two spurious queues in it's linux glue code: the busyq which queues incoming commands to the driver and the completeq which queues finished commands before sending them back to the mid-layer This patch just removes the busyq and makes the aic finally return the correct status to get the mid-layer to manage its queueing, so a command is either committed to the sequencer or returned to the midlayer for requeue. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-21[SCSI] correct aic7xxx period setting routinesJames Bottomley1-34/+37
This is similar to the previous sym2 problem. For Domain Validation to work we can't allow any period setting to turn wide on if it was previously off. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-21[SCSI] implement parameter limits in the SPI transport classJames Bottomley1-27/+161
There's a basic need not to have parameters go under or over certain values when doing domain validation. The basic ones are max_offset, max_width and min_period This patch makes the transport class take and enforce these three limits. Currently they can be set by the user, although they could obviously be read from the HBA's on-board NVRAM area during slave_configure (if it has one). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-17Merge of ↵2-6/+11
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
2005-05-16[PATCH] libata: flush COMRESET set and clearBrett Russ1-3/+3
Updated patch to fix erroneous flush of COMRESET set and missing flush of COMRESET clear. Created a new routine scr_write_flush() to try to prevent this in the future. Also, this patch is based on libata-2.6 instead of the previous libata-dev-2.6 based patch. Signed-off-by: Brett Russ <russb@emc.com> Index: libata-2.6/drivers/scsi/libata-core.c ===================================================================
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-22 17:53:23 +0300