summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2006-03-26[PATCH] mempool: use mempool_create_slab_pool()Matthew Dobson3-7/+5
Modify well over a dozen mempool users to call mempool_create_slab_pool() rather than calling mempool_create() with extra arguments, saving about 30 lines of code and increasing readability. Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] mempool: use common mempool kmalloc allocatorMatthew Dobson1-18/+4
This patch changes several mempool users, all of which are basically just wrappers around kmalloc(), to use the common mempool_kmalloc/kfree, rather than their own wrapper function, removing a bunch of duplicated code. Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] git-scsi-misc: min() warning fixAndrew Morton1-1/+1
drivers/scsi/sd.c: In function `sd_store_cache_type': drivers/scsi/sd.c:193: warning: comparison of distinct pointer types lacks a cast Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] Remove MODULE_PARMRusty Russell4-8/+8
MODULE_PARM was actually breaking: recent gcc version optimize them out as unused. It's time to replace the last users, which are generally in the most unloved drivers anyway. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24Merge branch 'upstream-linus' of ↵Linus Torvalds10-503/+540
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] libata: Remove dependence on host_set->dev for SAS [PATCH] libata: ata_scsi_ioctl cleanup [PATCH] libata: ata_scsi_queuecmd cleanup [libata] export ata_dev_pair; trim trailing whitespace [PATCH] libata: add ata_dev_pair helper [PATCH] Make libata not powerdown drivers on PM_EVENT_FREEZE. [PATCH] libata: make ata_set_mode() responsible for failure handling [PATCH] libata: use ata_dev_disable() in ata_bus_probe() [PATCH] libata: implement ata_dev_disable() [PATCH] libata: check if port is disabled after internal command [PATCH] libata: make per-dev transfer mode limits per-dev [PATCH] libata: add per-dev pio/mwdma/udma_mask [PATCH] libata: implement ata_unpack_xfermask() [libata] Move some bmdma-specific code to libata-bmdma.c [libata sata_uli] kill scr_addr abuse [libata sata_nv] eliminate duplicate codepaths with iomap [libata sata_nv] cleanups: convert #defines to enums; remove in-file history [libata sata_sil24] cleanups: use pci_iomap(), kzalloc()
2006-03-24[PATCH] s/;;/;/gAlexey Dobriyan1-1/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24[PATCH] remove ISA legacy functions: drivers/scsi/in2000.cAl Viro1-6/+18
switched to ioremap(), cleaned the probing up a bit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24[PATCH] remove ISA legacy functions: drivers/scsi/g_NCR5380.cAl Viro2-13/+38
switched CONFIG_SCSI_G_NCR5380_MEM code in g_NCR5380 to ioremap(); massaged g_NCR5380.h accordingly. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24[PATCH] libata: Remove dependence on host_set->dev for SASBrian King1-6/+7
Remove some of the dependence on the host_set struct in preparation for supporting SAS HBAs. Adds a struct device pointer to the ata_port struct. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[PATCH] libata: ata_scsi_ioctl cleanupBrian King1-13/+0
In preparation for SAS, kill some unnecessary code in ata_scsi_ioctl to find the ATA port and device given the scsi_device. Neither local is used in the function. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[PATCH] libata: ata_scsi_queuecmd cleanupBrian King1-14/+18
Encapsulate part of ata_scsi_queuecmd so that it can be reused by future SAS patches. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[libata] export ata_dev_pair; trim trailing whitespaceJeff Garzik6-47/+48
Mostly, trim trailing whitespace. Also: * export ata_dev_pair * move ata_dev_classify export closer to ata_dev_pair export
2006-03-24[PATCH] libata: add ata_dev_pair helperAlan Cox1-0/+17
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[PATCH] Make libata not powerdown drivers on PM_EVENT_FREEZE.Nigel Cunningham3-5/+6
At the moment libata doesn't pass pm_message_t down ata_device_suspend. This causes drives to be powered down when we just want a freeze, causing unnecessary wear and tear. This patch gets pm_message_t passed down so that it can be used to determine whether to power down the drive. Signed-off-by: Nigel Cunningham <nigel@suspend2.net> drivers/scsi/libata-core.c | 5 +++-- drivers/scsi/libata-scsi.c | 4 ++-- drivers/scsi/scsi_sysfs.c | 2 +- include/linux/libata.h | 4 ++-- include/scsi/scsi_host.h | 2 +- 5 files changed, 9 insertions(+), 8 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[PATCH] libata: make ata_set_mode() responsible for failure handlingTejun Heo1-20/+36
Make ata_set_mode() responsible for determining whether to take port or device offline on failure. ata_dev_set_xfermode() and ata_dev_set_mode() indicate error to the caller instead of disabling port directly on failure. Also, for consistency, ata_dev_present() check is done in ata_set_mode() instead of ata_dev_set_mode(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[PATCH] libata: use ata_dev_disable() in ata_bus_probe()Tejun Heo1-3/+1
We may or may not disable a device after ata_dev_configure() fails. Kill 'not supported, ignoring' message in ata_dev_configure() and use ata_dev_disable() in ata_bus_probe(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[PATCH] libata: implement ata_dev_disable()Tejun Heo1-0/+9
This patch implements ata_dev_disable() which prints a warning message and takes @dev offline. Currently, this is done by explicitly incrementing dev->class with case-by-case warning messages. Giving user clear indication when libata gives up will be more important as libata will be doing more retries. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[PATCH] libata: check if port is disabled after internal commandTejun Heo1-0/+16
libata core is being changed to disallow port/device disable on lower layers. However, some LLDDs (sata_mv) directly disable port on command failure. This patch makes ata_exec_internal() check whether a port got disabled after an internal command. If it is, AC_ERR_SYSTEM is added to err_mask and the port gets re-enabled. As internal command failure results in device disable for drivers which don't implement newer reset/EH callbacks, this change results in no behavior change for single device per port controllers. For slave-possible LLDDs which disable port on command failure, (1) such drivers don't exist currently, (2) issuing command to the other device of once-disabled port shouldn't result in catastrophe even if such driver exists. So, this should be enough as a temporary measure. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[PATCH] libata: make per-dev transfer mode limits per-devTejun Heo2-2/+2
Now that each ata_device has xfer masks, per-dev limits can be made per-dev instead of per-port. Make per-dev limits per-dev. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[PATCH] libata: add per-dev pio/mwdma/udma_maskTejun Heo1-18/+25
Add per-dev pio/mwdma/udma_mask. All transfer mode limits used to be applied to ap->*_mask which unnecessarily restricted other devices sharing the port. This change will also benefit later EH speed down and hotplug. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[PATCH] libata: implement ata_unpack_xfermask()Tejun Heo1-0/+23
Implement ata_unpack_xfermask(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23[PATCH] sem2mutex: drivers/scsi/ide-scsi.cJes Sorensen1-5/+6
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@suse.de> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23[PATCH] kill cdrom ->dev_ioctl methodChristoph Hellwig3-31/+26
Since early 2.4.x all cdrom drivers implement the block_device methods themselves, so they can handle additional ioctls directly instead of going through the cdrom layer. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23[libata] Move some bmdma-specific code to libata-bmdma.cJeff Garzik2-234/+234
No code changes, just moving code between files.
2006-03-23[libata sata_uli] kill scr_addr abuseJeff Garzik1-10/+27
sata_uli was storing PCI config addresses in a variable intended for port addresses, a variable soon to become void __iomem *. Update the driver to store the SCR address, found in PCI config space, in the driver-private data area.
2006-03-23[libata sata_nv] eliminate duplicate codepaths with iomapJeff Garzik1-44/+13
eliminate a bunch of if (mmio) writel() else outl() code with the pci_iomap() and io{read,write}{8,16,32}() interface.
2006-03-23[libata sata_nv] cleanups: convert #defines to enums; remove in-file historyJeff Garzik1-75/+49
2006-03-23[libata sata_sil24] cleanups: use pci_iomap(), kzalloc()Jeff Garzik1-13/+10
* libata will soon move to iomap, so we should use pci_iomap() and pci_iounmap(). * Use kzalloc() where appropriate.
2006-03-23scsi: link in the debug driver lastLinus Torvalds1-1/+3
If the debug driver is built-in, link it in last, so that any real drivers will probe first, rather than having the debug driver pick the first scsi slots.. Signed-off-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23[PATCH] ahci: add softresetTejun Heo1-1/+134
Now that libata is smart enought to handle both soft and hard resets, add softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23[PATCH] libata: do not ignore PIO-only devicesTejun Heo1-7/+0
As libata now can do PIO, don't ignore PIO-only devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23[PATCH] libata: Symbol exportsAlan Cox1-0/+2
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23[PATCH] Update libata DMA blacklist to cover versions, and resync with IDE layerAlan Cox1-35/+59
Not much to say here except that some drives have fixed and bad firmware Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23[PATCH] libata: Fix a drive detection problemAlan Cox1-0/+10
The current code follows the spec but uses an overlong delay. This would be great if the hardware did. Several vendors however forget the D7 pulldown. Fortunately 0xFF isnt a sane reset state so we can use it to skip detection as is done in drivers/ide. (ie this is a tested solution over a long time) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23[PATCH] libata: note missing posting in mmio cmd writeAlan Cox1-0/+2
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23Merge branch 'master'Jeff Garzik105-39894/+33695
2006-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: fixed path to moved file in include/linux/device.h Fix spelling in E1000_DISABLE_PACKET_SPLIT Kconfig description Documentation/dvb/get_dvb_firmware: fix firmware URL Documentation: Update to BUG-HUNTING Remove superfluous NOTIFY_COOKIE_LEN define add "tags" to .gitignore Fix "frist", "fisrt", typos fix rwlock usage example It's UTF-8
2006-03-22Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds104-39858/+33690
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (138 commits) [SCSI] libata: implement minimal transport template for ->eh_timed_out [SCSI] eliminate rphy allocation in favour of expander/end device allocation [SCSI] convert mptsas over to end_device/expander allocations [SCSI] allow displaying and setting of cache type via sysfs [SCSI] add scsi_mode_select to scsi_lib.c [SCSI] 3ware 9000 add big endian support [SCSI] qla2xxx: update MAINTAINERS [SCSI] scsi: move target_destroy call [SCSI] fusion - bump version [SCSI] fusion - expander hotplug suport in mptsas module [SCSI] fusion - exposing raid components in mptsas [SCSI] fusion - memory leak, and initializing fields [SCSI] fusion - exclosure misspelled [SCSI] fusion - cleanup mptsas event handling functions [SCSI] fusion - removing target_id/bus_id from the VirtDevice structure [SCSI] fusion - static fix's [SCSI] fusion - move some debug firmware event debug msgs to verbose level [SCSI] fusion - loginfo header update [SCSI] add scsi_reprobe_device [SCSI] megaraid_sas: fix extended timeout handling ...
2006-03-22[PATCH] sg: use compound pagesNick Piggin1-34/+3
sg increments the refcount of constituent pages in its higher order memory allocations when they are about to be mapped by userspace. This is done so the subsequent get_page/put_page when doing the mapping and unmapping does not free the page. Move over to the preferred way, that is, using compound pages instead. This fixes a whole class of possible obscure bugs where a get_user_pages on a constituent page may outlast the user mappings or even the driver. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Cc: Douglas Gilbert <dougg@torque.net> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] slab: Remove SLAB_NO_REAP optionChristoph Lameter1-1/+1
SLAB_NO_REAP is documented as an option that will cause this slab not to be reaped under memory pressure. However, that is not what happens. The only thing that SLAB_NO_REAP controls at the moment is the reclaim of the unused slab elements that were allocated in batch in cache_reap(). Cache_reap() is run every few seconds independently of memory pressure. Could we remove the whole thing? Its only used by three slabs anyways and I cannot find a reason for having this option. There is an additional problem with SLAB_NO_REAP. If set then the recovery of objects from alien caches is switched off. Objects not freed on the same node where they were initially allocated will only be reused if a certain amount of objects accumulates from one alien node (not very likely) or if the cache is explicitly shrunk. (Strangely __cache_shrink does not check for SLAB_NO_REAP) Getting rid of SLAB_NO_REAP fixes the problems with alien cache freeing. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[libata sata_vsc, sata_svw] Convert #define'd constants to enumsJeff Garzik2-73/+78
Also, bump sata_vsc version.
2006-03-22[libata] sata_vsc: fix inconsistent NULL checkingDan Williams2-23/+32
Also, cleanup interrupt mask content and note in Kconfig that this driver supports the Intel 31244. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[libata] fix oops on non-DMA bmdma hardwareJeff Garzik1-7/+10
Alan noted: "bmdma may be zero but the bmdma_irq_clear function gets called even in this case during pure PIO operation. Check we have a bmdma before we use it." I fixed this by adding a check for zero. While was I there, I fixed the non-standard indentation of the small function's code. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] libata: make irqtrap mode compileAlan Cox1-1/+1
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] libata: report which drive is causing mode problemsAlan Cox1-1/+1
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] libata: two new PCI helpersAlan Cox1-0/+36
The first performs the simplex clearing relevant to some chipsets that report simplex by default but can in fact do more if poked. The second is used to strip DMA modes from a PCI control with no BAR4 allocation. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] libata: Note weakness in our PCI handling that one day wants fixingAlan Cox1-0/+1
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] libata: make code actually compile with debugging onAlan Cox1-1/+1
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] libata: pick a less confusion "um dunno" errorAlan Cox1-7/+5
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[libata] sata_mv: off-by-1 fixMark Lord1-1/+4
This patch addresses a number of weird behaviours observed for the sata_mv driver, by fixing an "off by one" bug in processing of the EDMA response queue. Basically, sata_mv was looking in the wrong place for command results, and this produced a lot of unpredictable behaviour. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-04 16:42:35 +0300