summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2013-09-04Merge branch 'for-3.12' of ↵Linus Torvalds1-22/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata changes from Tejun Heo: "Two interesting changes. - libata acpi handling has been restructured so that the association between ata devices and ACPI handles are less convoluted. This change shouldn't change visible behavior. - Queued TRIM support, which enables sending TRIM to the device without draining in-flight RW commands, is added. Currently only enabled for ahci (and likely to stay that way for the foreseeable future). Other changes are driver-specific updates / fixes" * 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: bugfix: Remove __le32 in ata_tf_to_fis() libata: acpi: Remove ata_dev_acpi_handle stub in libata.h libata: Add support for queued DSM TRIM libata: Add support for SEND/RECEIVE FPDMA QUEUED libata: Add H2D FIS "auxiliary" port flag libata: Populate host-to-device FIS "auxiliary" field ata: acpi: rework the ata acpi bind support sata, highbank: send extra clock cycles in SGPIO patterns sata, highbank: set tx_atten override bits devicetree: create a separate binding description for sata_highbank drivers/ata/sata_rcar.c: simplify use of devm_ioremap_resource sata highbank: enable 64-bit DMA mask when using LPAE ata: pata_samsung_cf: add missing __iomem annotation ata: pata_arasan: Staticize local symbols sata_mv: Remove unneeded CONFIG_HAVE_CLK ifdefs ata: use dev_get_platdata() sata_mv: Remove unneeded forward declaration libata: acpi: remove dead code for ata_acpi_(un)bind libata: move 'struct ata_taskfile' and friends from ata.h to libata.h
2013-09-04Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds127-1319/+24360
Pull first round of SCSI updates from James Bottomley: "This patch set is a set of driver updates (ufs, zfcp, lpfc, mpt2/3sas, qla4xxx, qla2xxx [adding support for ISP8044 + other things]). We also have a new driver: esas2r which has a number of static checker problems, but which I expect to resolve over the -rc course of 3.12 under the new driver exception. We also have the error return that were discussed at LSF" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (118 commits) [SCSI] sg: push file descriptor list locking down to per-device locking [SCSI] sg: checking sdp->detached isn't protected when open [SCSI] sg: no need sg_open_exclusive_lock [SCSI] sg: use rwsem to solve race during exclusive open [SCSI] scsi_debug: fix logical block provisioning support when unmap_alignment != 0 [SCSI] scsi_debug: fix endianness bug in sdebug_build_parts() [SCSI] qla2xxx: Update the driver version to 8.06.00.08-k. [SCSI] qla2xxx: print MAC via %pMR. [SCSI] qla2xxx: Correction to message ids. [SCSI] qla2xxx: Correctly print out/in mailbox registers. [SCSI] qla2xxx: Add a new interface to update versions. [SCSI] qla2xxx: Move queue depth ramp down message to i/o debug level. [SCSI] qla2xxx: Select link initialization option bits from current operating mode. [SCSI] qla2xxx: Add loopback IDC-TIME-EXTEND aen handling support. [SCSI] qla2xxx: Set default critical temperature value in cases when ISPFX00 firmware doesn't provide it [SCSI] qla2xxx: QLAFX00 make over temperature AEN handling informational, add log for normal temperature AEN [SCSI] qla2xxx: Correct Interrupt Register offset for ISPFX00 [SCSI] qla2xxx: Remove handling of Shutdown Requested AEN from qlafx00_process_aen(). [SCSI] qla2xxx: Send all AENs for ISPFx00 to above layers. [SCSI] qla2xxx: Add changes in initialization for ISPFX00 cards with BIOS ...
2013-09-03Merge tag 'driver-core-3.12-rc1' of ↵Linus Torvalds1-5/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg KH: "Here's the big driver core pull request for 3.12-rc1. Lots of tiny changes here fixing up the way sysfs attributes are created, to try to make drivers simpler, and fix a whole class race conditions with creations of device attributes after the device was announced to userspace. All the various pieces are acked by the different subsystem maintainers" * tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits) firmware loader: fix pending_fw_head list corruption drivers/base/memory.c: introduce help macro to_memory_block dynamic debug: line queries failing due to uninitialized local variable sysfs: sysfs_create_groups returns a value. debugfs: provide debugfs_create_x64() when disabled rbd: convert bus code to use bus_groups firmware: dcdbas: use binary attribute groups sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled driver core: add #include <linux/sysfs.h> to core files. HID: convert bus code to use dev_groups Input: serio: convert bus code to use drv_groups Input: gameport: convert bus code to use drv_groups driver core: firmware: use __ATTR_RW() driver core: core: use DEVICE_ATTR_RO driver core: bus: use DRIVER_ATTR_WO() driver core: create write-only attribute macros for devices and drivers sysfs: create __ATTR_WO() driver-core: platform: convert bus code to use dev_groups workqueue: convert bus code to use dev_groups MEI: convert bus code to use dev_groups ...
2013-09-03Merge tag 'char-misc-3.12-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc patches from Greg KH: "Here is the big char/misc driver pull request for 3.12-rc1 Lots of driver updates all over the char/misc tree, full details in the shortlog" * tag 'char-misc-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (62 commits) drivers: uio: Kconfig: add MMU dependancy for UIO drivers: uio: Add driver for Humusoft MF624 DAQ PCI card drivers: uio_pdrv_genirq: use dev_get_platdata() drivers: uio_pruss: use dev_get_platdata() drivers: uio_dmem_genirq: use dev_get_platdata() drivers: parport: Kconfig: exclude h8300 for PARPORT_PC drivers: misc: ti-st: fix potential race if st_kim_start fails Drivers: hv: vmbus: Do not attempt to negoatiate a new version prematurely misc: vmw_balloon: Remove braces to fix build for clang. Drivers: hv: vmbus: Fix a bug in the handling of channel offers vme: vme_ca91cx42.c: fix to pass correct device identity to free_irq() VMCI: Add support for virtual IOMMU VMCI: Remove non-blocking/pinned queuepair support uio: uio_pruss: remove unnecessary platform_set_drvdata() parport: amiga: remove unnecessary platform_set_drvdata() vme: vme_vmivme7805.c: add missing __iomem annotation vme: vme_ca91cx42.c: add missing __iomem annotation vme: vme_tsi148.c: add missing __iomem annotation drivers/misc/hpilo: Correct panic when an AUX iLO is detected uio: drop unused vma_count member in uio_device struct ...
2013-09-03[SCSI] sg: push file descriptor list locking down to per-device lockingVaughan Cao1-28/+34
Push file descriptor list locking down to per-device locking. Let sg_index_lock only protect device lookup. sdp->detached is also set and checked with this lock held. Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] sg: checking sdp->detached isn't protected when openVaughan Cao1-8/+9
@detached is set under the protection of sg_index_lock. Without getting the lock, new sfp will be added during sg removal and there is no chance for it to be picked out. So check with sg_index_lock held in sg_add_sfp(). Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] sg: no need sg_open_exclusive_lockVaughan Cao1-29/+5
Open exclusive check is protected by o_sem, no need sg_open_exclusive_lock. @exclude is used to record which type of rwsem we are holding. Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] sg: use rwsem to solve race during exclusive openVaughan Cao1-38/+41
A race condition may happen if two threads are both trying to open the same sg with O_EXCL simultaneously. It's possible that they both find fsds list is empty and get_exclude(sdp) returns 0, then they both call set_exclude() and break out from wait_event_interruptible and resume open. Now use rwsem to protect this process. Exclusive open gets write lock and others get read lock. The lock will be held until file descriptor is closed. This also leads 'exclude' only a status rather than a check mark. Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] scsi_debug: fix logical block provisioning support when ↵Akinobu Mita1-2/+8
unmap_alignment != 0 Commit b90ebc3d5c41c9164ae04efd2e4f8204c2a186f1 ("[SCSI] scsi_debug: fix logical block provisioning support") fixed several issues with logical block provisioning support, but it still doesn't properly fix the cases when unmap_alignment > 0. For example, load scsi_debug module with the following module parameters and make all blocks mapped by filling the storage with zero. # modprobe scsi_debug lbpu=1 unmap_alignment=1 unmap_granularity=4 # dd if=/dev/zero of=$DEV Then, try to unmap the first unmappable blocks at lba=1, but GET LBA STATUS unexpectedly reports that the last UNMAP has done nothing. # sg_unmap --lba=1 --num=4 $DEV # sg_get_lba_status --lba=1 $DEV descriptor LBA: 0x0000000000000001 blocks: 16383 mapped The problem is in map_index_to_lba(), which should return the first LBA which is corresponding to a given index of provisioning map (map_storep). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] scsi_debug: fix endianness bug in sdebug_build_parts()Akinobu Mita1-2/+2
With module parameter num_parts > 0, partition table is built on the ramdisk storage when loading the driver. Unfortunately, there is an endianness bug in sdebug_build_parts(). So the partition table is not correctly initialized on big-endian systems. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Tested-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Update the driver version to 8.06.00.08-k.Saurav Kashyap1-2/+2
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: print MAC via %pMR.Andy Shevchenko1-4/+1
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Correction to message ids.Saurav Kashyap4-11/+15
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Correctly print out/in mailbox registers.Joe Carnuccio1-15/+13
At mailbox/buffer debug level, print the correct values of the outgoing and incoming mailbox registers. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add a new interface to update versions.Sawan Chandak2-3/+15
On any Adapter when we flash through FC/FCoE without card reset option it still shows the Running FW version in Flashed FW version. This new interface will be used by API to instruct the driver to update its cache versions. Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Move queue depth ramp down message to i/o debug level.Chad Dupuis1-1/+1
Unless there is a need to observe them, the queue depth ramp up/down messages are a nuisance and may cause the system to become unresponsive so move it a non-default logging level. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Select link initialization option bits from current ↵Joe Carnuccio1-1/+5
operating mode. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add loopback IDC-TIME-EXTEND aen handling support.Santosh Vernekar4-20/+47
Earlier IDC-TIME-EXTEND aen was a nop and ignored by driver. We now have to handle the aen so that other protocol drivers can use time extension during some loopback operations. Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Set default critical temperature value in cases when ISPFX00 ↵Armen Baloyan2-1/+6
firmware doesn't provide it Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: QLAFX00 make over temperature AEN handling informational, ↵Armen Baloyan2-2/+14
add log for normal temperature AEN Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Correct Interrupt Register offset for ISPFX00Armen Baloyan1-1/+1
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Remove handling of Shutdown Requested AEN from ↵Armen Baloyan1-4/+0
qlafx00_process_aen(). Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Send all AENs for ISPFx00 to above layers.Armen Baloyan1-2/+4
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add changes in initialization for ISPFX00 cards with BIOSArmen Baloyan2-0/+12
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add changes to support extended IOs for ISPFX00Armen Baloyan3-6/+12
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add missing FCP statistics to sysfs interface.Joe Carnuccio6-3/+55
Add the missing FCP statistics to sysfs. Add reset FCP statistics functionality via sysfs. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Make log message that prints when a completion status ↵Chad Dupuis1-2/+4
requires a port down more readable. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add critical temperature handling for ISPFX00.Armen Baloyan5-17/+104
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Acked-by: Srinivasa Rao <srinivasa.rao@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Notify ISPFX00 firmware when driver is unloaded or system is ↵Armen Baloyan3-1/+9
shut down. Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Acked-by: Srinivasa Rao <srinivasa.rao@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Reconfigure thermal temperature.Joe Carnuccio9-41/+53
For supported ISPS, Read asic temperature by calling the GET PARAMS (type C) mailbox command. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add setting of driver version string for vendor application.Joe Carnuccio5-1/+119
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Remove QL_DEBUG_LEVEL_17 defines from qla_nx.c.Chad Dupuis2-14/+1
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add ISPFX00 specific bus reset routine.Armen Baloyan4-4/+30
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Perform warm reset every 2 minutes if firmware load fails ↵Armen Baloyan1-0/+8
for ISPFX00. Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Acked-by: Srinivasa Rao <srinivasa.rao@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Set factory reset recovery timeout to 10 min. for ISPFX00.Armen Baloyan2-0/+4
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Acked-by: Srinivasa Rao <srinivasa.rao@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Correct multiqueue offset calculations.Andrew Vasquez4-24/+18
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Fix incorrect test after list_for_each_entry() exits.Joe Carnuccio1-1/+4
list_for_each_entry() never leaves the iterator pointing to null. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add support for ISP8044.Atul Deshmukh18-158/+4849
[jejb: checkpatch fixes] Signed-off-by: Atul Deshmukh <atul.deshmukh@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Print some variables to hexadecimal string via %*phN formatOleksandr Khoshaba8-181/+58
The patch changes a specifier used to output some variables. Instead of using stack for each byte the '%*ph[CN]' allows to take a one pointer and prints entire buffer as a hexadecimal string with the separator ':' or ''. Signed-off-by: Oleksandr Khoshaba <Oleksandr.Khoshaba@gmail.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] mpt3sas: Remove phys on topology changeJan Vesely1-1/+4
Signed-off-by: Jan Vesely <jvesely@redhat.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] mpt2sas: Remove phys on topology change.Jan Vesely1-1/+4
Signed-off-by: Jan Vesely <jvesely@redhat.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] bfa: firmware update to 3.2.1.1Rasesh Mody1-3/+3
This patch updates the firmware to address the thermal notification issue Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] esas2r: ATTO Technology ExpressSAS 6G SAS/SATA RAID Adapter DriverBradley Grove18-0/+15662
This is a new driver for ATTO Technology's ExpressSAS series of hardware RAID adapters. It supports the following adapters: - ExpressSAS R60F - ExpressSAS R680 - ExpressSAS R608 - ExpressSAS R644 Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] eata_pio: off by one in eata_pio_detect()Dan Carpenter1-1/+1
Smatch complains that the reg_IRQ[] array only has MAXIRQ (16) elements so we are one space beyond the end of the array here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla4xxx: Update driver version to 5.04.00-k1Vikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla4xxx: Return error if minidump data collection failsVikas Chaudhary1-0/+1
Return error from function qla4_8xxx_collect_md_data() if minidump data collection fails. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla4xxx: Fix the minidump data collection check in for loopSantosh Vernekar1-5/+3
Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla4xxx: Add pex-dma support for capturing minidumpSantosh Vernekar4-3/+263
Add pex-dma support for ISP8324 and ISP8042 to improve the minidump capture time. Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] mpt3sas: Added a driver module parameter max_msix_vectorsSreekanth Reddy1-0/+14
Added a driver module parameter max_msix_vectors. Using this module parameter the maximum number of MSI-X vectors could be set. The number of MSI-X vectors used would be the minimum of MSI-X vectors supported by the HBA, the number of CPU cores and the value set to max_msix_vectors module parameter. The default value of this module parameter is set to 8. The default value of this parameter is set to 8 inorder to reduce the amount of memory required for Reply Descriptor Post queue. This is because with the higher MSI-X vectors, some times kernel is not able to allocate the requested amount of memory and crash is observed. To overcome this problem, the default value is set to 8. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla4xxx: Update driver version to 5.04.00-k0Vikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 01:22:14 +0300