summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
5 daysscsi: sg: Fix occasional bogus elapsed time that exceeds timeoutMichal Rábek1-7/+13
[ Upstream commit 0e1677654259a2f3ccf728de1edde922a3c4ba57 ] A race condition was found in sg_proc_debug_helper(). It was observed on a system using an IBM LTO-9 SAS Tape Drive (ULTRIUM-TD9) and monitoring /proc/scsi/sg/debug every second. A very large elapsed time would sometimes appear. This is caused by two race conditions. We reproduced the issue with an IBM ULTRIUM-HH9 tape drive on an x86_64 architecture. A patched kernel was built, and the race condition could not be observed anymore after the application of this patch. A reproducer C program utilising the scsi_debug module was also built by Changhui Zhong and can be viewed here: https://github.com/MichaelRabek/linux-tests/blob/master/drivers/scsi/sg/sg_race_trigger.c The first race happens between the reading of hp->duration in sg_proc_debug_helper() and request completion in sg_rq_end_io(). The hp->duration member variable may hold either of two types of information: #1 - The start time of the request. This value is present while the request is not yet finished. #2 - The total execution time of the request (end_time - start_time). If sg_proc_debug_helper() executes *after* the value of hp->duration was changed from #1 to #2, but *before* srp->done is set to 1 in sg_rq_end_io(), a fresh timestamp is taken in the else branch, and the elapsed time (value type #2) is subtracted from a timestamp, which cannot yield a valid elapsed time (which is a type #2 value as well). To fix this issue, the value of hp->duration must change under the protection of the sfp->rq_list_lock in sg_rq_end_io(). Since sg_proc_debug_helper() takes this read lock, the change to srp->done and srp->header.duration will happen atomically from the perspective of sg_proc_debug_helper() and the race condition is thus eliminated. The second race condition happens between sg_proc_debug_helper() and sg_new_write(). Even though hp->duration is set to the current time stamp in sg_add_request() under the write lock's protection, it gets overwritten by a call to get_sg_io_hdr(), which calls copy_from_user() to copy struct sg_io_hdr from userspace into kernel space. hp->duration is set to the start time again in sg_common_write(). If sg_proc_debug_helper() is called between these two calls, an arbitrary value set by userspace (usually zero) is used to compute the elapsed time. To fix this issue, hp->duration must be set to the current timestamp again after get_sg_io_hdr() returns successfully. A small race window still exists between get_sg_io_hdr() and setting hp->duration, but this window is only a few instructions wide and does not result in observable issues in practice, as confirmed by testing. Additionally, we fix the format specifier from %d to %u for printing unsigned int values in sg_proc_debug_helper(). Signed-off-by: Michal Rábek <mrabek@redhat.com> Suggested-by: Tomas Henzl <thenzl@redhat.com> Tested-by: Changhui Zhong <czhong@redhat.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Link: https://patch.msgid.link/20251212160900.64924-1-mrabek@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
5 daysscsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure ↵Xingui Yang1-14/+0
scanned in again after probe failed" [ Upstream commit 278712d20bc8ec29d1ad6ef9bdae9000ef2c220c ] This reverts commit ab2068a6fb84751836a84c26ca72b3beb349619d. When probing the exp-attached sata device, libsas/libata will issue a hard reset in sas_probe_sata() -> ata_sas_async_probe(), then a broadcast event will be received after the disk probe fails, and this commit causes the probe will be re-executed on the disk, and a faulty disk may get into an indefinite loop of probe. Therefore, revert this commit, although it can fix some temporary issues with disk probe failure. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Link: https://patch.msgid.link/20251202065627.140361-1-yangxingui@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
5 daysscsi: ipr: Enable/disable IRQD_NO_BALANCING during resetWen Xiong1-1/+27
[ Upstream commit 6ac3484fb13b2fc7f31cfc7f56093e7d0ce646a5 ] A dynamic remove/add storage adapter test hits EEH on PowerPC: EEH: [c00000000004f75c] __eeh_send_failure_event+0x7c/0x160 EEH: [c000000000048444] eeh_dev_check_failure.part.0+0x254/0x650 EEH: [c008000001650678] eeh_readl+0x60/0x90 [ipr] EEH: [c00800000166746c] ipr_cancel_op+0x2b8/0x524 [ipr] EEH: [c008000001656524] ipr_eh_abort+0x6c/0x130 [ipr] EEH: [c000000000ab0d20] scmd_eh_abort_handler+0x140/0x440 EEH: [c00000000017e558] process_one_work+0x298/0x590 EEH: [c00000000017eef8] worker_thread+0xa8/0x620 EEH: [c00000000018be34] kthread+0x124/0x130 EEH: [c00000000000cd64] ret_from_kernel_thread+0x5c/0x64 A PCIe bus trace reveals that a vector of MSI-X is cleared to 0 by irqbalance daemon. If we disable irqbalance daemon, we won't see the issue. With debug enabled in ipr driver: [ 44.103071] ipr: Entering __ipr_remove [ 44.103083] ipr: Entering ipr_initiate_ioa_bringdown [ 44.103091] ipr: Entering ipr_reset_shutdown_ioa [ 44.103099] ipr: Leaving ipr_reset_shutdown_ioa [ 44.103105] ipr: Leaving ipr_initiate_ioa_bringdown [ 44.149918] ipr: Entering ipr_reset_ucode_download [ 44.149935] ipr: Entering ipr_reset_alert [ 44.150032] ipr: Entering ipr_reset_start_timer [ 44.150038] ipr: Leaving ipr_reset_alert [ 44.244343] scsi 1:2:3:0: alua: Detached [ 44.254300] ipr: Entering ipr_reset_start_bist [ 44.254320] ipr: Entering ipr_reset_start_timer [ 44.254325] ipr: Leaving ipr_reset_start_bist [ 44.364329] scsi 1:2:4:0: alua: Detached [ 45.134341] scsi 1:2:5:0: alua: Detached [ 45.860949] ipr: Entering ipr_reset_shutdown_ioa [ 45.860962] ipr: Leaving ipr_reset_shutdown_ioa [ 45.860966] ipr: Entering ipr_reset_alert [ 45.861028] ipr: Entering ipr_reset_start_timer [ 45.861035] ipr: Leaving ipr_reset_alert [ 45.964302] ipr: Entering ipr_reset_start_bist [ 45.964309] ipr: Entering ipr_reset_start_timer [ 45.964313] ipr: Leaving ipr_reset_start_bist [ 46.264301] ipr: Entering ipr_reset_bist_done [ 46.264309] ipr: Leaving ipr_reset_bist_done During adapter reset, ipr device driver blocks config space access but can't block MMIO access for MSI-X entries. There is very small window: irqbalance daemon kicks in during adapter reset before ipr driver calls pci_restore_state(pdev) to restore MSI-X table. irqbalance daemon reads back all 0 for that MSI-X vector in __pci_read_msi_msg(). irqbalance daemon: msi_domain_set_affinity() ->irq_chip_set_affinity_patent() ->xive_irq_set_affinity() ->irq_chip_compose_msi_msg() ->pseries_msi_compose_msg() ->__pci_read_msi_msg(): read all 0 since didn't call pci_restore_state ->irq_chip_write_msi_msg() -> pci_write_msg_msi(): write 0 to the msix vector entry When ipr driver calls pci_restore_state(pdev) in ipr_reset_restore_cfg_space(), the MSI-X vector entry has been cleared by irqbalance daemon in pci_write_msg_msix(). pci_restore_state() ->__pci_restore_msix_state() Below is the MSI-X table for ipr adapter after irqbalance daemon kicked in during adapter reset: Dump MSIx table: index=0 address_lo=c800 address_hi=10000000 msg_data=0 Dump MSIx table: index=1 address_lo=c810 address_hi=10000000 msg_data=0 Dump MSIx table: index=2 address_lo=c820 address_hi=10000000 msg_data=0 Dump MSIx table: index=3 address_lo=c830 address_hi=10000000 msg_data=0 Dump MSIx table: index=4 address_lo=c840 address_hi=10000000 msg_data=0 Dump MSIx table: index=5 address_lo=c850 address_hi=10000000 msg_data=0 Dump MSIx table: index=6 address_lo=c860 address_hi=10000000 msg_data=0 Dump MSIx table: index=7 address_lo=c870 address_hi=10000000 msg_data=0 Dump MSIx table: index=8 address_lo=0 address_hi=0 msg_data=0 ---------> Hit EEH since msix vector of index=8 are 0 Dump MSIx table: index=9 address_lo=c890 address_hi=10000000 msg_data=0 Dump MSIx table: index=10 address_lo=c8a0 address_hi=10000000 msg_data=0 Dump MSIx table: index=11 address_lo=c8b0 address_hi=10000000 msg_data=0 Dump MSIx table: index=12 address_lo=c8c0 address_hi=10000000 msg_data=0 Dump MSIx table: index=13 address_lo=c8d0 address_hi=10000000 msg_data=0 Dump MSIx table: index=14 address_lo=c8e0 address_hi=10000000 msg_data=0 Dump MSIx table: index=15 address_lo=c8f0 address_hi=10000000 msg_data=0 [ 46.264312] ipr: Entering ipr_reset_restore_cfg_space [ 46.267439] ipr: Entering ipr_fail_all_ops [ 46.267447] ipr: Leaving ipr_fail_all_ops [ 46.267451] ipr: Leaving ipr_reset_restore_cfg_space [ 46.267454] ipr: Entering ipr_ioa_bringdown_done [ 46.267458] ipr: Leaving ipr_ioa_bringdown_done [ 46.267467] ipr: Entering ipr_worker_thread [ 46.267470] ipr: Leaving ipr_worker_thread IRQ balancing is not required during adapter reset. Enable "IRQ_NO_BALANCING" flag before starting adapter reset and disable it after calling pci_restore_state(). The irqbalance daemon is disabled for this short period of time (~2s). Co-developed-by: Kyle Mahlkuch <Kyle.Mahlkuch@ibm.com> Signed-off-by: Kyle Mahlkuch <Kyle.Mahlkuch@ibm.com> Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com> Link: https://patch.msgid.link/20251028142427.3969819-2-wenxiong@linux.ibm.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
5 daysscsi: core: ufs: Fix a hang in the error handlerSanjeev Yadav1-1/+3
commit 8a3514d348de87a9d5e2ac00fbac4faae0b97996 upstream. ufshcd_err_handling_prepare() calls ufshcd_rpm_get_sync(). The latter function can only succeed if UFSHCD_EH_IN_PROGRESS is not set because resuming involves submitting a SCSI command and ufshcd_queuecommand() returns SCSI_MLQUEUE_HOST_BUSY if UFSHCD_EH_IN_PROGRESS is set. Fix this hang by setting UFSHCD_EH_IN_PROGRESS after ufshcd_rpm_get_sync() has been called instead of before. Backtrace: __switch_to+0x174/0x338 __schedule+0x600/0x9e4 schedule+0x7c/0xe8 schedule_timeout+0xa4/0x1c8 io_schedule_timeout+0x48/0x70 wait_for_common_io+0xa8/0x160 //waiting on START_STOP wait_for_completion_io_timeout+0x10/0x20 blk_execute_rq+0xe4/0x1e4 scsi_execute_cmd+0x108/0x244 ufshcd_set_dev_pwr_mode+0xe8/0x250 __ufshcd_wl_resume+0x94/0x354 ufshcd_wl_runtime_resume+0x3c/0x174 scsi_runtime_resume+0x64/0xa4 rpm_resume+0x15c/0xa1c __pm_runtime_resume+0x4c/0x90 // Runtime resume ongoing ufshcd_err_handler+0x1a0/0xd08 process_one_work+0x174/0x808 worker_thread+0x15c/0x490 kthread+0xf4/0x1ec ret_from_fork+0x10/0x20 Signed-off-by: Sanjeev Yadav <sanjeev.y@mediatek.com> [ bvanassche: rewrote patch description ] Fixes: 62694735ca95 ("[SCSI] ufs: Add runtime PM support for UFS host controller driver") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250523201409.1676055-1-bvanassche@acm.org Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> [Shivani: Modified to apply on 5.10.y] Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysscsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddressMike Christie2-9/+40
[ Upstream commit 6f1d64b13097e85abda0f91b5638000afc5f9a06 ] Bug report and analysis from Ding Hui. During iSCSI session logout, if another task accesses the shost ipaddress attr, we can get a KASAN UAF report like this: [ 276.942144] BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x78/0xe0 [ 276.942535] Write of size 4 at addr ffff8881053b45b8 by task cat/4088 [ 276.943511] CPU: 2 PID: 4088 Comm: cat Tainted: G E 6.1.0-rc8+ #3 [ 276.943997] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 [ 276.944470] Call Trace: [ 276.944943] <TASK> [ 276.945397] dump_stack_lvl+0x34/0x48 [ 276.945887] print_address_description.constprop.0+0x86/0x1e7 [ 276.946421] print_report+0x36/0x4f [ 276.947358] kasan_report+0xad/0x130 [ 276.948234] kasan_check_range+0x35/0x1c0 [ 276.948674] _raw_spin_lock_bh+0x78/0xe0 [ 276.949989] iscsi_sw_tcp_host_get_param+0xad/0x2e0 [iscsi_tcp] [ 276.951765] show_host_param_ISCSI_HOST_PARAM_IPADDRESS+0xe9/0x130 [scsi_transport_iscsi] [ 276.952185] dev_attr_show+0x3f/0x80 [ 276.953005] sysfs_kf_seq_show+0x1fb/0x3e0 [ 276.953401] seq_read_iter+0x402/0x1020 [ 276.954260] vfs_read+0x532/0x7b0 [ 276.955113] ksys_read+0xed/0x1c0 [ 276.955952] do_syscall_64+0x38/0x90 [ 276.956347] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.956769] RIP: 0033:0x7f5d3a679222 [ 276.957161] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 32 c0 0b 00 e8 a5 fe 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 276.958009] RSP: 002b:00007ffc864d16a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 276.958431] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5d3a679222 [ 276.958857] RDX: 0000000000020000 RSI: 00007f5d3a4fe000 RDI: 0000000000000003 [ 276.959281] RBP: 00007f5d3a4fe000 R08: 00000000ffffffff R09: 0000000000000000 [ 276.959682] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000020000 [ 276.960126] R13: 0000000000000003 R14: 0000000000000000 R15: 0000557a26dada58 [ 276.960536] </TASK> [ 276.961357] Allocated by task 2209: [ 276.961756] kasan_save_stack+0x1e/0x40 [ 276.962170] kasan_set_track+0x21/0x30 [ 276.962557] __kasan_kmalloc+0x7e/0x90 [ 276.962923] __kmalloc+0x5b/0x140 [ 276.963308] iscsi_alloc_session+0x28/0x840 [scsi_transport_iscsi] [ 276.963712] iscsi_session_setup+0xda/0xba0 [libiscsi] [ 276.964078] iscsi_sw_tcp_session_create+0x1fd/0x330 [iscsi_tcp] [ 276.964431] iscsi_if_create_session.isra.0+0x50/0x260 [scsi_transport_iscsi] [ 276.964793] iscsi_if_recv_msg+0xc5a/0x2660 [scsi_transport_iscsi] [ 276.965153] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.965546] netlink_unicast+0x4d5/0x7b0 [ 276.965905] netlink_sendmsg+0x78d/0xc30 [ 276.966236] sock_sendmsg+0xe5/0x120 [ 276.966576] ____sys_sendmsg+0x5fe/0x860 [ 276.966923] ___sys_sendmsg+0xe0/0x170 [ 276.967300] __sys_sendmsg+0xc8/0x170 [ 276.967666] do_syscall_64+0x38/0x90 [ 276.968028] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.968773] Freed by task 2209: [ 276.969111] kasan_save_stack+0x1e/0x40 [ 276.969449] kasan_set_track+0x21/0x30 [ 276.969789] kasan_save_free_info+0x2a/0x50 [ 276.970146] __kasan_slab_free+0x106/0x190 [ 276.970470] __kmem_cache_free+0x133/0x270 [ 276.970816] device_release+0x98/0x210 [ 276.971145] kobject_cleanup+0x101/0x360 [ 276.971462] iscsi_session_teardown+0x3fb/0x530 [libiscsi] [ 276.971775] iscsi_sw_tcp_session_destroy+0xd8/0x130 [iscsi_tcp] [ 276.972143] iscsi_if_recv_msg+0x1bf1/0x2660 [scsi_transport_iscsi] [ 276.972485] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.972808] netlink_unicast+0x4d5/0x7b0 [ 276.973201] netlink_sendmsg+0x78d/0xc30 [ 276.973544] sock_sendmsg+0xe5/0x120 [ 276.973864] ____sys_sendmsg+0x5fe/0x860 [ 276.974248] ___sys_sendmsg+0xe0/0x170 [ 276.974583] __sys_sendmsg+0xc8/0x170 [ 276.974891] do_syscall_64+0x38/0x90 [ 276.975216] entry_SYSCALL_64_after_hwframe+0x63/0xcd We can easily reproduce by two tasks: 1. while :; do iscsiadm -m node --login; iscsiadm -m node --logout; done 2. while :; do cat \ /sys/devices/platform/host*/iscsi_host/host*/ipaddress; done iscsid | cat --------------------------------+--------------------------------------- |- iscsi_sw_tcp_session_destroy | |- iscsi_session_teardown | |- device_release | |- iscsi_session_release ||- dev_attr_show |- kfree | |- show_host_param_ | ISCSI_HOST_PARAM_IPADDRESS | |- iscsi_sw_tcp_host_get_param | |- r/w tcp_sw_host->session (UAF) |- iscsi_host_remove | |- iscsi_host_free | Fix the above bug by splitting the session removal into 2 parts: 1. removal from iSCSI class which includes sysfs and removal from host tracking. 2. freeing of session. During iscsi_tcp host and session removal we can remove the session from sysfs then remove the host from sysfs. At this point we know userspace is not accessing the kernel via sysfs so we can free the session and host. Link: https://lore.kernel.org/r/20230117193937.21244-2-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Acked-by: Ding Hui <dinghui@sangfor.com.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> [Shivani: The false parameter was not passed to iscsi_host_remove() because, in Linux 5.10.y, the default behavior of iscsi_host_remove() already assumes false.] Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysscsi: iscsi: Move pool freeingMike Christie1-2/+1
[ Upstream commit a1f3486b3b095ed2259d7a1fc021a8b6e72a5365 ] This doesn't fix any bugs, but it makes more sense to free the pool after we have removed the session. At that time we know nothing is touching any of the session fields, because all devices have been removed and scans are stopped. Link: https://lore.kernel.org/r/20210525181821.7617-19-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> [Shivani: Modified to apply on 5.10.y] Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysscsi: aic94xx: fix use-after-free in device removal pathJunrui Luo1-0/+3
commit f6ab594672d4cba08540919a4e6be2e202b60007 upstream. The asd_pci_remove() function fails to synchronize with pending tasklets before freeing the asd_ha structure, leading to a potential use-after-free vulnerability. When a device removal is triggered (via hot-unplug or module unload), race condition can occur. The fix adds tasklet_kill() before freeing the asd_ha structure, ensuring all scheduled tasklets complete before cleanup proceeds. Reported-by: Yuhao Jiang <danisjiang@gmail.com> Reported-by: Junrui Luo <moonafterrain@outlook.com> Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Cc: stable@vger.kernel.org Signed-off-by: Junrui Luo <moonafterrain@outlook.com> Link: https://patch.msgid.link/ME2PR01MB3156AB7DCACA206C845FC7E8AFFDA@ME2PR01MB3156.ausprd01.prod.outlook.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysscsi: Revert "scsi: qla2xxx: Perform lockless command completion in abort path"Tony Battersby1-6/+0
commit b57fbc88715b6d18f379463f48a15b560b087ffe upstream. This reverts commit 0367076b0817d5c75dfb83001ce7ce5c64d803a9. The commit being reverted added code to __qla2x00_abort_all_cmds() to call sp->done() without holding a spinlock. But unlike the older code below it, this new code failed to check sp->cmd_type and just assumed TYPE_SRB, which results in a jump to an invalid pointer in target-mode with TYPE_TGT_CMD: qla2xxx [0000:65:00.0]-d034:8: qla24xx_do_nack_work create sess success 0000000009f7a79b qla2xxx [0000:65:00.0]-5003:8: ISP System Error - mbx1=1ff5h mbx2=10h mbx3=0h mbx4=0h mbx5=191h mbx6=0h mbx7=0h. qla2xxx [0000:65:00.0]-d01e:8: -> fwdump no buffer qla2xxx [0000:65:00.0]-f03a:8: qla_target(0): System error async event 0x8002 occurred qla2xxx [0000:65:00.0]-00af:8: Performing ISP error recovery - ha=0000000058183fda. BUG: kernel NULL pointer dereference, address: 0000000000000000 PF: supervisor instruction fetch in kernel mode PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: 0010 [#1] SMP CPU: 2 PID: 9446 Comm: qla2xxx_8_dpc Tainted: G O 6.1.133 #1 Hardware name: Supermicro Super Server/X11SPL-F, BIOS 4.2 12/15/2023 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffc90001f93dc8 EFLAGS: 00010206 RAX: 0000000000000282 RBX: 0000000000000355 RCX: ffff88810d16a000 RDX: ffff88810dbadaa8 RSI: 0000000000080000 RDI: ffff888169dc38c0 RBP: ffff888169dc38c0 R08: 0000000000000001 R09: 0000000000000045 R10: ffffffffa034bdf0 R11: 0000000000000000 R12: ffff88810800bb40 R13: 0000000000001aa8 R14: ffff888100136610 R15: ffff8881070f7400 FS: 0000000000000000(0000) GS:ffff88bf80080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000010c8ff006 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x4d/0x8b ? page_fault_oops+0x91/0x180 ? trace_buffer_unlock_commit_regs+0x38/0x1a0 ? exc_page_fault+0x391/0x5e0 ? asm_exc_page_fault+0x22/0x30 __qla2x00_abort_all_cmds+0xcb/0x3e0 [qla2xxx_scst] qla2x00_abort_all_cmds+0x50/0x70 [qla2xxx_scst] qla2x00_abort_isp_cleanup+0x3b7/0x4b0 [qla2xxx_scst] qla2x00_abort_isp+0xfd/0x860 [qla2xxx_scst] qla2x00_do_dpc+0x581/0xa40 [qla2xxx_scst] kthread+0xa8/0xd0 </TASK> Then commit 4475afa2646d ("scsi: qla2xxx: Complete command early within lock") added the spinlock back, because not having the lock caused a race and a crash. But qla2x00_abort_srb() in the switch below already checks for qla2x00_chip_is_down() and handles it the same way, so the code above the switch is now redundant and still buggy in target-mode. Remove it. Cc: stable@vger.kernel.org Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Link: https://patch.msgid.link/3a8022dc-bcfd-4b01-9f9b-7a9ec61fa2a3@cybernetics.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysscsi: qla2xxx: Use reinit_completion on mbx_intr_compTony Battersby1-0/+2
[ Upstream commit 957aa5974989fba4ae4f807ebcb27f12796edd4d ] If a mailbox command completes immediately after wait_for_completion_timeout() times out, ha->mbx_intr_comp could be left in an inconsistent state, causing the next mailbox command not to wait for the hardware. Fix by reinitializing the completion before use. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Link: https://patch.msgid.link/11b6485e-0bfd-4784-8f99-c06a196dad94@cybernetics.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
5 daysscsi: qla2xxx: Fix initiator mode with qlini_mode=exclusiveTony Battersby1-7/+1
[ Upstream commit 8f58fc64d559b5fda1b0a5e2a71422be61e79ab9 ] When given the module parameter qlini_mode=exclusive, qla2xxx in initiator mode is initially unable to successfully send SCSI commands to devices it finds while scanning, resulting in an escalating series of resets until an adapter reset clears the issue. Fix by checking the active mode instead of the module parameter. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Link: https://patch.msgid.link/1715ec14-ba9a-45dc-9cf2-d41aa6b81b5e@cybernetics.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
5 daysscsi: sim710: Fix resource leak by adding missing ioport_unmap() callsHaotian Zhang1-0/+2
[ Upstream commit acd194d9b5bac419e04968ffa44351afabb50bac ] The driver calls ioport_map() to map I/O ports in sim710_probe_common() but never calls ioport_unmap() to release the mapping. This causes resource leaks in both the error path when request_irq() fails and in the normal device removal path via sim710_device_remove(). Add ioport_unmap() calls in the out_release error path and in sim710_device_remove(). Fixes: 56fece20086e ("[PATCH] finally fix 53c700 to use the generic iomem infrastructure") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Link: https://patch.msgid.link/20251029032555.1476-1-vulab@iscas.ac.cn Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
5 daysscsi: stex: Fix reboot_notifier leak in probe error pathHaotian Zhang1-0/+1
[ Upstream commit 20da637eb545b04753e20c675cfe97b04c7b600b ] In stex_probe(), register_reboot_notifier() is called at the beginning, but if any subsequent initialization step fails, the function returns without unregistering the notifier, resulting in a resource leak. Add unregister_reboot_notifier() in the out_disable error path to ensure proper cleanup on all failure paths. Fixes: 61b745fa63db ("scsi: stex: Add S6 support") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Link: https://patch.msgid.link/20251104094847.270-1-vulab@iscas.ac.cn Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07scsi: pm80xx: Set phy->enable_completion only when weIgor Pylypiv1-1/+3
[ Upstream commit e4f949ef1516c0d74745ee54a0f4882c1f6c7aea ] pm8001_phy_control() populates the enable_completion pointer with a stack address, sends a PHY_LINK_RESET / PHY_HARD_RESET, waits 300 ms, and returns. The problem arises when a phy control response comes late. After 300 ms the pm8001_phy_control() function returns and the passed enable_completion stack address is no longer valid. Late phy control response invokes complete() on a dangling enable_completion pointer which leads to a kernel crash. Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Terrence Adams <tadamsjr@google.com> Link: https://lore.kernel.org/r/20240627155924.2361370-2-tadamsjr@google.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Nazar Kalashnikov <sivartiwe@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07scsi: core: Fix a regression triggered by scsi_host_busy()Bart Van Assche1-2/+3
[ Upstream commit a0b7780602b1b196f47e527fec82166a7e67c4d0 ] Commit 995412e23bb2 ("blk-mq: Replace tags->lock with SRCU for tag iterators") introduced the following regression: Call trace: __srcu_read_lock+0x30/0x80 (P) blk_mq_tagset_busy_iter+0x44/0x300 scsi_host_busy+0x38/0x70 ufshcd_print_host_state+0x34/0x1bc ufshcd_link_startup.constprop.0+0xe4/0x2e0 ufshcd_init+0x944/0xf80 ufshcd_pltfrm_init+0x504/0x820 ufs_rockchip_probe+0x2c/0x88 platform_probe+0x5c/0xa4 really_probe+0xc0/0x38c __driver_probe_device+0x7c/0x150 driver_probe_device+0x40/0x120 __driver_attach+0xc8/0x1e0 bus_for_each_dev+0x7c/0xdc driver_attach+0x24/0x30 bus_add_driver+0x110/0x230 driver_register+0x68/0x130 __platform_driver_register+0x20/0x2c ufs_rockchip_pltform_init+0x1c/0x28 do_one_initcall+0x60/0x1e0 kernel_init_freeable+0x248/0x2c4 kernel_init+0x20/0x140 ret_from_fork+0x10/0x20 Fix this regression by making scsi_host_busy() check whether the SCSI host tag set has already been initialized. tag_set->ops is set by scsi_mq_setup_tags() just before blk_mq_alloc_tag_set() is called. This fix is based on the assumption that scsi_host_busy() and scsi_mq_setup_tags() calls are serialized. This is the case in the UFS driver. Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com> Closes: https://lore.kernel.org/linux-block/pnezafputodmqlpumwfbn644ohjybouveehcjhz2hmhtcf2rka@sdhoiivync4y/ Cc: Ming Lei <ming.lei@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patch.msgid.link/20251007214800.1678255-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07scsi: sg: Do not sleep in atomic contextBart Van Assche1-1/+9
commit 90449f2d1e1f020835cba5417234636937dd657e upstream. sg_finish_rem_req() calls blk_rq_unmap_user(). The latter function may sleep. Hence, call sg_finish_rem_req() with interrupts enabled instead of disabled. Reported-by: syzbot+c01f8e6e73f20459912e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-scsi/691560c4.a70a0220.3124cb.001a.GAE@google.com/ Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org Fixes: 97d27b0dd015 ("scsi: sg: close race condition in sg_remove_sfp_usercontext()") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://patch.msgid.link/20251113181643.1108973-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07scsi: lpfc: Define size of debugfs entry for xri rebalancingJustin Tee1-0/+3
[ Upstream commit 5de09770b1c0e229d2cec93e7f634fcdc87c9bc8 ] To assist in debugging lpfc_xri_rebalancing driver parameter, a debugfs entry is used. The debugfs file operations for xri rebalancing have been previously implemented, but lack definition for its information buffer size. Similar to other pre-existing debugfs entry buffers, define LPFC_HDWQINFO_SIZE as 8192 bytes. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Message-ID: <20250915180811.137530-9-justintee8345@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07scsi: pm8001: Use int instead of u32 to store error codesQianfeng Rong1-1/+1
[ Upstream commit bee3554d1a4efbce91d6eca732f41b97272213a5 ] Use int instead of u32 for 'ret' variable to store negative error codes returned by PM8001_CHIP_DISP->set_nvmd_req(). Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Link: https://lore.kernel.org/r/20250826093242.230344-1-rongqianfeng@vivo.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07scsi: pm80xx: Fix race condition caused by static variablesFrancisco Gutierrez3-10/+17
[ Upstream commit d6477ee38ccfbeaed885733c13f41d9076e2f94a ] Eliminate the use of static variables within the log pull implementation to resolve a race condition and prevent data gaps when pulling logs from multiple controllers in parallel, ensuring each operation is properly isolated. Signed-off-by: Francisco Gutierrez <frankramirez@google.com> Link: https://lore.kernel.org/r/20250723183543.1443301-1-frankramirez@google.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-29minmax: make generic MIN() and MAX() macros available everywhereLinus Torvalds1-5/+1
[ Upstream commit 1a251f52cfdc417c84411a056bc142cbd77baef4 ] This just standardizes the use of MIN() and MAX() macros, with the very traditional semantics. The goal is to use these for C constant expressions and for top-level / static initializers, and so be able to simplify the min()/max() macros. These macro names were used by various kernel code - they are very traditional, after all - and all such users have been fixed up, with a few different approaches: - trivial duplicated macro definitions have been removed Note that 'trivial' here means that it's obviously kernel code that already included all the major kernel headers, and thus gets the new generic MIN/MAX macros automatically. - non-trivial duplicated macro definitions are guarded with #ifndef This is the "yes, they define their own versions, but no, the include situation is not entirely obvious, and maybe they don't get the generic version automatically" case. - strange use case #1 A couple of drivers decided that the way they want to describe their versioning is with #define MAJ 1 #define MIN 2 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) which adds zero value and I just did my Alexander the Great impersonation, and rewrote that pointless Gordian knot as #define DRV_VERSION "1.2" instead. - strange use case #2 A couple of drivers thought that it's a good idea to have a random 'MIN' or 'MAX' define for a value or index into a table, rather than the traditional macro that takes arguments. These values were re-written as C enum's instead. The new function-line macros only expand when followed by an open parenthesis, and thus don't clash with enum use. Happily, there weren't really all that many of these cases, and a lot of users already had the pattern of using '#ifndef' guarding (or in one case just using '#undef MIN') before defining their own private version that does the same thing. I left such cases alone. Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Eliav Farber <farbere@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-29scsi: hpsa: Fix potential memory leak in hpsa_big_passthru_ioctl()Thorsten Blum1-9/+12
commit b81296591c567b12d3873b05a37b975707959b94 upstream. Replace kmalloc() followed by copy_from_user() with memdup_user() to fix a memory leak that occurs when copy_from_user(buff[sg_used],,) fails and the 'cleanup1:' path does not free the memory for 'buff[sg_used]'. Using memdup_user() avoids this by freeing the memory internally. Since memdup_user() already allocates memory, use kzalloc() in the else branch instead of manually zeroing 'buff[sg_used]' using memset(0). Cc: stable@vger.kernel.org Fixes: edd163687ea5 ("[SCSI] hpsa: add driver for HP Smart Array controllers.") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Acked-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-29scsi: mvsas: Fix use-after-free bugs in mvs_work_queueDuoming Zhou1-1/+1
[ Upstream commit 60cd16a3b7439ccb699d0bf533799eeb894fd217 ] During the detaching of Marvell's SAS/SATA controller, the original code calls cancel_delayed_work() in mvs_free() to cancel the delayed work item mwq->work_q. However, if mwq->work_q is already running, the cancel_delayed_work() may fail to cancel it. This can lead to use-after-free scenarios where mvs_free() frees the mvs_info while mvs_work_queue() is still executing and attempts to access the already-freed mvs_info. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work callback) mvs_pci_remove() | mvs_free() | mvs_work_queue() cancel_delayed_work() | kfree(mvi) | | mvi-> // UAF Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled and any executing delayed work item completes before the mvs_info is deallocated. This bug was found by static analysis. Fixes: 20b09c2992fe ("[SCSI] mvsas: add support for 94xx; layout change; bug fixes") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-29scsi: mvsas: Use sas_task_find_rq() for taggingJohn Garry4-23/+29
[ Upstream commit 2acf97f199f9eba8321390325519e9b6bff60108 ] The request associated with a SCSI command coming from the block layer has a unique tag, so use that when possible for getting a slot. Unfortunately we don't support reserved commands in the SCSI midlayer yet. As such, SMP tasks - as an example - will not have a request associated, so in the interim continue to manage those tags for that type of sas_task internally. We reserve an arbitrary 4 tags for these internal tags. Indeed, we already decrement MVS_RSVD_SLOTS by 2 for the shost can_queue when flag MVF_FLAG_SOC is set. This change was made in commit 20b09c2992fe ("[SCSI] mvsas: add support for 94xx; layout change; bug fixes"), but what those 2 slots are used for is not obvious. Also make the tag management functions static, where possible. Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1666091763-11023-8-git-send-email-john.garry@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Stable-dep-of: 60cd16a3b743 ("scsi: mvsas: Fix use-after-free bugs in mvs_work_queue") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-29scsi: mvsas: Delete mvs_tag_init()John Garry3-10/+0
[ Upstream commit ffc9f9bf3f14876d019f67ef17d41138802529a8 ] All mvs_tag_init() does is zero the tag bitmap, but this is already done with the kzalloc() call to alloc the tags, so delete this unneeded function. Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1666091763-11023-7-git-send-email-john.garry@huawei.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Stable-dep-of: 60cd16a3b743 ("scsi: mvsas: Fix use-after-free bugs in mvs_work_queue") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-29scsi: mpt3sas: Fix crash in transport port remove by using ioc_info()Ranjan Kumar1-5/+3
[ Upstream commit 1703fe4f8ae50d1fb6449854e1fcaed1053e3a14 ] During mpt3sas_transport_port_remove(), messages were logged with dev_printk() against &mpt3sas_port->port->dev. At this point the SAS transport device may already be partially unregistered or freed, leading to a crash when accessing its struct device. Using ioc_info(), which logs via the PCI device (ioc->pdev->dev), guaranteed to remain valid until driver removal. [83428.295776] Oops: general protection fault, probably for non-canonical address 0x6f702f323a33312d: 0000 [#1] SMP NOPTI [83428.295785] CPU: 145 UID: 0 PID: 113296 Comm: rmmod Kdump: loaded Tainted: G OE 6.16.0-rc1+ #1 PREEMPT(voluntary) [83428.295792] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [83428.295795] Hardware name: Dell Inc. Precision 7875 Tower/, BIOS 89.1.67 02/23/2024 [83428.295799] RIP: 0010:__dev_printk+0x1f/0x70 [83428.295805] Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 d1 48 85 f6 74 52 4c 8b 46 50 4d 85 c0 74 1f 48 8b 46 68 48 85 c0 74 22 <48> 8b 08 0f b6 7f 01 48 c7 c2 db e8 42 ad 83 ef 30 e9 7b f8 ff ff [83428.295813] RSP: 0018:ff85aeafc3137bb0 EFLAGS: 00010206 [83428.295817] RAX: 6f702f323a33312d RBX: ff4290ee81292860 RCX: 5000cca25103be32 [83428.295820] RDX: ff85aeafc3137bb8 RSI: ff4290eeb1966c00 RDI: ffffffffc1560845 [83428.295823] RBP: ff85aeafc3137c18 R08: 74726f702f303a33 R09: ff85aeafc3137bb8 [83428.295826] R10: ff85aeafc3137b18 R11: ff4290f5bd60fe68 R12: ff4290ee81290000 [83428.295830] R13: ff4290ee6e345de0 R14: ff4290ee81290000 R15: ff4290ee6e345e30 [83428.295833] FS: 00007fd9472a6740(0000) GS:ff4290f5ce96b000(0000) knlGS:0000000000000000 [83428.295837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [83428.295840] CR2: 00007f242b4db238 CR3: 00000002372b8006 CR4: 0000000000771ef0 [83428.295844] PKRU: 55555554 [83428.295846] Call Trace: [83428.295848] <TASK> [83428.295850] _dev_printk+0x5c/0x80 [83428.295857] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295863] mpt3sas_transport_port_remove+0x1c7/0x420 [mpt3sas] [83428.295882] _scsih_remove_device+0x21b/0x280 [mpt3sas] [83428.295894] ? _scsih_expander_node_remove+0x108/0x140 [mpt3sas] [83428.295906] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295910] mpt3sas_device_remove_by_sas_address.part.0+0x8f/0x110 [mpt3sas] [83428.295921] _scsih_expander_node_remove+0x129/0x140 [mpt3sas] [83428.295933] _scsih_expander_node_remove+0x6a/0x140 [mpt3sas] [83428.295944] scsih_remove+0x3f0/0x4a0 [mpt3sas] [83428.295957] pci_device_remove+0x3b/0xb0 [83428.295962] device_release_driver_internal+0x193/0x200 [83428.295968] driver_detach+0x44/0x90 [83428.295971] bus_remove_driver+0x69/0xf0 [83428.295975] pci_unregister_driver+0x2a/0xb0 [83428.295979] _mpt3sas_exit+0x1f/0x300 [mpt3sas] [83428.295991] __do_sys_delete_module.constprop.0+0x174/0x310 [83428.295997] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296000] ? __x64_sys_getdents64+0x9a/0x110 [83428.296005] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296009] ? syscall_trace_enter+0xf6/0x1b0 [83428.296014] do_syscall_64+0x7b/0x2c0 [83428.296019] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296023] entry_SYSCALL_64_after_hwframe+0x76/0x7e Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-29scsi: myrs: Fix dma_alloc_coherent() error checkThomas Fourier1-4/+4
[ Upstream commit edb35b1ffc686fd9b5a91902f034eb9f4d2c9f6b ] Check for NULL return value with dma_alloc_coherent(), because DMA address is not always set by dma_alloc_coherent() on failure. Fixes: 77266186397c ("scsi: myrs: Add Mylex RAID controller (SCSI interface)") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250725083112.43975-2-fourier.thomas@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-29scsi: pm80xx: Fix array-index-out-of-of-bounds on rmmodNiklas Cassel1-1/+8
[ Upstream commit 251be2f6037fb7ab399f68cd7428ff274133d693 ] Since commit f7b705c238d1 ("scsi: pm80xx: Set phy_attached to zero when device is gone") UBSAN reports: UBSAN: array-index-out-of-bounds in drivers/scsi/pm8001/pm8001_sas.c:786:17 index 28 is out of range for type 'pm8001_phy [16]' on rmmod when using an expander. For a direct attached device, attached_phy contains the local phy id. For a device behind an expander, attached_phy contains the remote phy id, not the local phy id. I.e. while pm8001_ha will have pm8001_ha->chip->n_phy local phys, for a device behind an expander, attached_phy can be much larger than pm8001_ha->chip->n_phy (depending on the amount of phys of the expander). E.g. on my system pm8001_ha has 8 phys with phy ids 0-7. One of the ports has an expander connected. The expander has 31 phys with phy ids 0-30. The pm8001_ha->phy array only contains the phys of the HBA. It does not contain the phys of the expander. Thus, it is wrong to use attached_phy to index the pm8001_ha->phy array for a device behind an expander. Thus, we can only clear phy_attached for devices that are directly attached. Fixes: f7b705c238d1 ("scsi: pm80xx: Set phy_attached to zero when device is gone") Reviewed-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20250814173215.1765055-14-cassel@kernel.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-09scsi: lpfc: Fix buffer free/clear order in deferred receive pathJohn Evans1-4/+6
commit 9dba9a45c348e8460da97c450cddf70b2056deb3 upstream. Fix a use-after-free window by correcting the buffer release sequence in the deferred receive path. The code freed the RQ buffer first and only then cleared the context pointer under the lock. Concurrent paths (e.g., ABTS and the repost path) also inspect and release the same pointer under the lock, so the old order could lead to double-free/UAF. Note that the repost path already uses the correct pattern: detach the pointer under the lock, then free it after dropping the lock. The deferred path should do the same. Fixes: 472e146d1cf3 ("scsi: lpfc: Correct upcalling nvmet_fc transport during io done downcall") Cc: stable@vger.kernel.org Signed-off-by: John Evans <evans1210144@gmail.com> Link: https://lore.kernel.org/r/20250828044008.743-1-evans1210144@gmail.com Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-04scsi: core: sysfs: Correct sysfs attributes access rightsDamien Le Moal1-2/+2
[ Upstream commit a2f54ff15c3bdc0132e20aae041607e2320dbd73 ] The SCSI sysfs attributes "supported_mode" and "active_mode" do not define a store method and thus cannot be modified. Correct the DEVICE_ATTR() call for these two attributes to not include S_IWUSR to allow write access as they are read-only. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250728041700.76660-1-dlemoal@kernel.org Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Johannes Thumshin <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28scsi: qla4xxx: Prevent a potential error pointer dereferenceDan Carpenter1-0/+2
[ Upstream commit 9dcf111dd3e7ed5fce82bb108e3a3fc001c07225 ] The qla4xxx_get_ep_fwdb() function is supposed to return NULL on error, but qla4xxx_ep_connect() returns error pointers. Propagating the error pointers will lead to an Oops in the caller, so change the error pointers to NULL. Fixes: 13483730a13b ("[SCSI] qla4xxx: fix flash/ddb support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/aJwnVKS9tHsw1tEu@stanley.mountain Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28scsi: ufs: exynos: Fix programming of HCI_UTRL_NEXUS_TYPEAndré Draszik1-2/+2
[ Upstream commit 01aad16c2257ab8ff33b152b972c9f2e1af47912 ] On Google gs101, the number of UTP transfer request slots (nutrs) is 32, and in this case the driver ends up programming the UTRL_NEXUS_TYPE incorrectly as 0. This is because the left hand side of the shift is 1, which is of type int, i.e. 31 bits wide. Shifting by more than that width results in undefined behaviour. Fix this by switching to the BIT() macro, which applies correct type casting as required. This ensures the correct value is written to UTRL_NEXUS_TYPE (0xffffffff on gs101), and it also fixes a UBSAN shift warning: UBSAN: shift-out-of-bounds in drivers/ufs/host/ufs-exynos.c:1113:21 shift exponent 32 is too large for 32-bit type 'int' For consistency, apply the same change to the nutmrs / UTMRL_NEXUS_TYPE write. Fixes: 55f4b1f73631 ("scsi: ufs: ufs-exynos: Add UFS host support for Exynos SoCs") Cc: stable@vger.kernel.org Signed-off-by: André Draszik <andre.draszik@linaro.org> Link: https://lore.kernel.org/r/20250707-ufs-exynos-shift-v1-1-1418e161ae40@linaro.org Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> [ Adjusted path from drivers/ufs/host to drivers/scsi/ufs ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28scsi: pm80xx: Fix memory leak during rmmodAjish Koshy2-0/+12
[ Upstream commit 51e6ed83bb4ade7c360551fa4ae55c4eacea354b ] Driver failed to release all memory allocated. This would lead to memory leak during driver removal. Properly free memory when the module is removed. Link: https://lore.kernel.org/r/20210906170404.5682-5-Ajish.Koshy@microchip.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> [Shivani: Modified to apply on 5.10.y] Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28scsi: lpfc: Fix link down processing to address NULL pointer dereferenceJames Smart1-3/+5
[ Upstream commit 1854f53ccd88ad4e7568ddfafafffe71f1ceb0a6 ] If an FC link down transition while PLOGIs are outstanding to fabric well known addresses, outstanding ABTS requests may result in a NULL pointer dereference. Driver unload requests may hang with repeated "2878" log messages. The Link down processing results in ABTS requests for outstanding ELS requests. The Abort WQEs are sent for the ELSs before the driver had set the link state to down. Thus the driver is sending the Abort with the expectation that an ABTS will be sent on the wire. The Abort request is stalled waiting for the link to come up. In some conditions the driver may auto-complete the ELSs thus if the link does come up, the Abort completions may reference an invalid structure. Fix by ensuring that Abort set the flag to avoid link traffic if issued due to conditions where the link failed. Link: https://lore.kernel.org/r/20211020211417.88754-7-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> [Shivani: Modified to apply on 5.10.y] Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28scsi: lpfc: Remove redundant assignment to avoid memory leakJiasheng Jiang1-1/+0
[ Upstream commit eea6cafb5890db488fce1c69d05464214616d800 ] Remove the redundant assignment if kzalloc() succeeds to avoid memory leak. Fixes: bd2cdd5e400f ("scsi: lpfc: NVME Initiator: Add debugfs support") Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com> Link: https://lore.kernel.org/r/20250801185202.42631-1-jiashengjiangcool@gmail.com Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28scsi: aacraid: Stop using PCI_IRQ_AFFINITYJohn Garry1-2/+1
[ Upstream commit dafeaf2c03e71255438ffe5a341d94d180e6c88e ] When PCI_IRQ_AFFINITY is set for calling pci_alloc_irq_vectors(), it means interrupts are spread around the available CPUs. It also means that the interrupts become managed, which means that an interrupt is shutdown when all the CPUs in the interrupt affinity mask go offline. Using managed interrupts in this way means that we should ensure that completions should not occur on HW queues where the associated interrupt is shutdown. This is typically achieved by ensuring only CPUs which are online can generate IO completion traffic to the HW queue which they are mapped to (so that they can also serve completion interrupts for that HW queue). The problem in the driver is that a CPU can generate completions to a HW queue whose interrupt may be shutdown, as the CPUs in the HW queue interrupt affinity mask may be offline. This can cause IOs to never complete and hang the system. The driver maintains its own CPU <-> HW queue mapping for submissions, see aac_fib_vector_assign(), but this does not reflect the CPU <-> HW queue interrupt affinity mapping. Commit 9dc704dcc09e ("scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity") tried to remedy this issue may mapping CPUs properly to HW queue interrupts. However this was later reverted in commit c5becf57dd56 ("Revert "scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity") - it seems that there were other reports of hangs. I guess that this was due to some implementation issue in the original commit or maybe a HW issue. Fix the very original hang by just not using managed interrupts by not setting PCI_IRQ_AFFINITY. In this way, all CPUs will be in each HW queue affinity mask, so should not create completion problems if any CPUs go offline. Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20250715111535.499853-1-john.g.garry@oracle.com Closes: https://lore.kernel.org/linux-scsi/20250618192427.3845724-1-jmeneghi@redhat.com/ Reviewed-by: John Meneghini <jmeneghi@redhat.com> Tested-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28scsi: Fix sas_user_scan() to handle wildcard and multi-channel scansRanjan Kumar2-13/+49
[ Upstream commit 37c4e72b0651e7697eb338cd1fb09feef472cc1a ] sas_user_scan() did not fully process wildcard channel scans (SCAN_WILD_CARD) when a transport-specific user_scan() callback was present. Only channel 0 would be scanned via user_scan(), while the remaining channels were skipped, potentially missing devices. user_scan() invokes updated sas_user_scan() for channel 0, and if successful, iteratively scans remaining channels (1 to shost->max_channel) via scsi_scan_host_selected(). This ensures complete wildcard scanning without affecting transport-specific scanning behavior. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20250624061649.17990-1-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28scsi: mpt3sas: Correctly handle ATA device errorsDamien Le Moal1-0/+19
[ Upstream commit 15592a11d5a5c8411ac8494ec49736b658f6fbff ] With the ATA error model, an NCQ command failure always triggers an abort (termination) of all NCQ commands queued on the device. In such case, the SAT or the host must handle the failed command according to the command sense data and immediately retry all other NCQ commands that were aborted due to the failed NCQ command. For SAS HBAs controlled by the mpt3sas driver, NCQ command aborts are not handled by the HBA SAT and sent back to the host, with an ioc log information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function _scsih_io_done() always forces a retry of commands terminated with the status MPI2_IOCSTATUS_SCSI_IOC_TERMINATED using the SCSI result DID_SOFT_ERROR, regardless of the log_info for the command. This correctly forces the retry of collateral NCQ abort commands, but with the retry counter for the command being incremented. If a command to an ATA device is subject to too many retries due to other NCQ commands failing (e.g. read commands trying to access unreadable sectors), the collateral NCQ abort commands may be terminated with an error as they run out of retries. This violates the SAT specification and causes hard-to-debug command errors. Solve this issue by modifying the handling of the MPI2_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an ATA device and if the command loginfo indicates an NCQ collateral abort. If that is the case, force the command retry using the SCSI result DID_IMM_RETRY to avoid incrementing the command retry count. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250606052747.742998-3-dlemoal@kernel.org Tested-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28scsi: lpfc: Check for hdwq null ptr when cleaning up lpfc_vport structureJustin Tee1-0/+4
[ Upstream commit 6698796282e828733cde3329c887b4ae9e5545e9 ] If a call to lpfc_sli4_read_rev() from lpfc_sli4_hba_setup() fails, the resultant cleanup routine lpfc_sli4_vport_delete_fcp_xri_aborted() may occur before sli4_hba.hdwqs are allocated. This may result in a null pointer dereference when attempting to take the abts_io_buf_list_lock for the first hardware queue. Fix by adding a null ptr check on phba->sli4_hba.hdwq and early return because this situation means there must have been an error during port initialization. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20250618192138.124116-4-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28scsi: bfa: Double-free fixjackysliu1-0/+1
[ Upstream commit add4c4850363d7c1b72e8fce9ccb21fdd2cf5dc9 ] When the bfad_im_probe() function fails during initialization, the memory pointed to by bfad->im is freed without setting bfad->im to NULL. Subsequently, during driver uninstallation, when the state machine enters the bfad_sm_stopping state and calls the bfad_im_probe_undo() function, it attempts to free the memory pointed to by bfad->im again, thereby triggering a double-free vulnerability. Set bfad->im to NULL if probing fails. Signed-off-by: jackysliu <1972843537@qq.com> Link: https://lore.kernel.org/r/tencent_3BB950D6D2D470976F55FC879206DE0B9A09@qq.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28scsi: libiscsi: Initialize iscsi_conn->dd_data only if memory is allocatedShowrya M N1-1/+2
[ Upstream commit 3ea3a256ed81f95ab0f3281a0e234b01a9cae605 ] In case of an ib_fast_reg_mr allocation failure during iSER setup, the machine hits a panic because iscsi_conn->dd_data is initialized unconditionally, even when no memory is allocated (dd_size == 0). This leads invalid pointer dereference during connection teardown. Fix by setting iscsi_conn->dd_data only if memory is actually allocated. Panic trace: ------------ iser: iser_create_fastreg_desc: Failed to allocate ib_fast_reg_mr err=-12 iser: iser_alloc_rx_descriptors: failed allocating rx descriptors / data buffers BUG: unable to handle page fault for address: fffffffffffffff8 RIP: 0010:swake_up_locked.part.5+0xa/0x40 Call Trace: complete+0x31/0x40 iscsi_iser_conn_stop+0x88/0xb0 [ib_iser] iscsi_stop_conn+0x66/0xc0 [scsi_transport_iscsi] iscsi_if_stop_conn+0x14a/0x150 [scsi_transport_iscsi] iscsi_if_rx+0x1135/0x1834 [scsi_transport_iscsi] ? netlink_lookup+0x12f/0x1b0 ? netlink_deliver_tap+0x2c/0x200 netlink_unicast+0x1ab/0x280 netlink_sendmsg+0x257/0x4f0 ? _copy_from_user+0x29/0x60 sock_sendmsg+0x5f/0x70 Signed-off-by: Showrya M N <showrya@chelsio.com> Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Link: https://lore.kernel.org/r/20250627112329.19763-1-showrya@chelsio.com Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28scsi: ufs: core: Use link recovery when h8 exit fails during runtime resumeSeunghui Lee1-1/+9
[ Upstream commit 35dabf4503b94a697bababe94678a8bc989c3223 ] If the h8 exit fails during runtime resume process, the runtime thread enters runtime suspend immediately and the error handler operates at the same time. It becomes stuck and cannot be recovered through the error handler. To fix this, use link recovery instead of the error handler. Fixes: 4db7a2360597 ("scsi: ufs: Fix concurrency of error handler and other error recovery paths") Signed-off-by: Seunghui Lee <sh043.lee@samsung.com> Link: https://lore.kernel.org/r/20250717081213.6811-1-sh043.lee@samsung.com Reviewed-by: Bean Huo <beanhuo@micron.com> Acked-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28scsi: isci: Fix dma_unmap_sg() nents valueThomas Fourier1-1/+1
[ Upstream commit 063bec4444d54e5f35d11949c5c90eaa1ff84c11 ] The dma_unmap_sg() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned. Fixes: ddcc7e347a89 ("isci: fix dma_unmap_sg usage") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250627142451.241713-2-fourier.thomas@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28scsi: mvsas: Fix dma_unmap_sg() nents valueThomas Fourier1-2/+2
[ Upstream commit 0141618727bc929fe868153d21797f10ce5bef3f ] The dma_unmap_sg() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned. Fixes: b5762948263d ("[SCSI] mvsas: Add Marvell 6440 SAS/SATA driver") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250627134822.234813-2-fourier.thomas@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28scsi: ibmvscsi_tgt: Fix dma_unmap_sg() nents valueThomas Fourier1-2/+4
[ Upstream commit 023a293b9cd0bb86a9b50cd7688a3d9d266826db ] The dma_unmap_sg() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned. Fixes: 88a678bbc34c ("ibmvscsis: Initial commit of IBM VSCSI Tgt Driver") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250630111803.94389-2-fourier.thomas@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-17scsi: ufs: core: Fix spelling of a sysfs attribute nameBart Van Assche1-2/+2
[ Upstream commit 021f243627ead17eb6500170256d3d9be787dad8 ] Change "resourse" into "resource" in the name of a sysfs attribute. Fixes: d829fc8a1058 ("scsi: ufs: sysfs: unit descriptor") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250624181658.336035-1-bvanassche@acm.org Reviewed-by: Avri Altman <avri.altman@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-17scsi: qla4xxx: Fix missing DMA mapping error in qla4xxx_alloc_pdu()Thomas Fourier1-0/+2
[ Upstream commit 00f452a1b084efbe8dcb60a29860527944a002a1 ] dma_map_XXX() can fail and should be tested for errors with dma_mapping_error(). Fixes: b3a271a94d00 ("[SCSI] qla4xxx: support iscsiadm session mgmt") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250618071742.21822-2-fourier.thomas@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-17scsi: qla2xxx: Fix DMA mapping test in qla24xx_get_port_database()Thomas Fourier1-1/+1
[ Upstream commit c3b214719a87735d4f67333a8ef3c0e31a34837c ] dma_map_XXX() functions return as error values DMA_MAPPING_ERROR which is often ~0. The error value should be tested with dma_mapping_error() like it was done in qla26xx_dport_diagnostics(). Fixes: 818c7f87a177 ("scsi: qla2xxx: Add changes in preparation for vendor extended FDMI/RDP") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250617161115.39888-2-fourier.thomas@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27scsi: qedf: Use designated initializer for struct qed_fcoe_cb_opsKees Cook1-1/+1
commit d8720235d5b5cad86c1f07f65117ef2a96f8bec7 upstream. Recent fixes to the randstruct GCC plugin allowed it to notice that this structure is entirely function pointers and is therefore subject to randomization, but doing so requires that it always use designated initializers. Explicitly specify the "common" member as being initialized. Silences: drivers/scsi/qedf/qedf_main.c:702:9: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init] 702 | { | ^ Fixes: 035f7f87b729 ("randstruct: Enable Clang support") Link: https://lore.kernel.org/r/20250502224156.work.617-kees@kernel.org Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27scsi: storvsc: Increase the timeouts to storvsc_timeoutDexuan Cui1-4/+6
commit b2f966568faaad326de97481096d0f3dc0971c43 upstream. Currently storvsc_timeout is only used in storvsc_sdev_configure(), and 5s and 10s are used elsewhere. It turns out that rarely the 5s is not enough on Azure, so let's use storvsc_timeout everywhere. In case a timeout happens and storvsc_channel_init() returns an error, close the VMBus channel so that any host-to-guest messages in the channel's ringbuffer, which might come late, can be safely ignored. Add a "const" to storvsc_timeout. Cc: stable@kernel.org Signed-off-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/1749243459-10419-1-git-send-email-decui@microsoft.com Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27scsi: lpfc: Use memcpy() for BIOS versionDaniel Wagner1-2/+2
[ Upstream commit ae82eaf4aeea060bb736c3e20c0568b67c701d7d ] The strlcat() with FORTIFY support is triggering a panic because it thinks the target buffer will overflow although the correct target buffer size is passed in. Anyway, instead of memset() with 0 followed by a strlcat(), just use memcpy() and ensure that the resulting buffer is NULL terminated. BIOSVersion is only used for the lpfc_printf_log() which expects a properly terminated string. Signed-off-by: Daniel Wagner <wagi@kernel.org> Link: https://lore.kernel.org/r/20250409-fix-lpfc-bios-str-v1-1-05dac9e51e13@kernel.org Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27scsi: lpfc: Fix lpfc_check_sli_ndlp() handling for GEN_REQUEST64 commandsJustin Tee1-1/+1
[ Upstream commit 05ae6c9c7315d844fbc15afe393f5ba5e5771126 ] In lpfc_check_sli_ndlp(), the get_job_els_rsp64_did remote_id assignment does not apply for GEN_REQUEST64 commands as it only has meaning for a ELS_REQUEST64 command. So, if (iocb->ndlp == ndlp) is false, we could erroneously return the wrong value. Fix by replacing the fallthrough statement with a break statement before the remote_id check. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20250425194806.3585-2-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-24 22:30:25 +0300