summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2006-06-27[SCSI] qla2xxx: Correctly set the firmware NOS/OLS timeout during ↵Andrew Vasquez2-3/+2
initialization. Original code incorrectly assigned it to the driver's link-down-timeout value (a value in seconds). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27[SCSI] qla2xxx: Convert from pci_module_init() to pci_register_driver().Andrew Vasquez1-30/+8
Also remove qla2xxx_probe_one/qla2xxx_remove_one stubs previously used with external firmware module loaders. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27[SCSI] qla2xxx: Correct 'loop-down' determination logic in qla2x00_fw_ready().Andrew Vasquez1-2/+1
As there is no point in failing the initialization process when firmware informs the host software that it could not transition beyond a CONFIG_WAIT nor WAIT_FOR_LOGIN state. Previous logic would mark such conditions as a general *failure* and subsequently tear-down the scsi-host during initialization. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27[SCSI] qla2xxx: Add support for extended error logging.Andrew Vasquez4-46/+19
Similar in form to QLogic's standard offering -- via the 'extended_error_logging' module parameter. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27[SCSI] qla2xxx: Cleanup DEBUG macro usage.Andrew Vasquez5-166/+154
- macro usage statements should terminate with a ';' - remove unused macros. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27[SCSI] qla2xxx: Remove no-op IOCTL codes and macros.Andrew Vasquez3-41/+0
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27[SCSI] qla2xxx: Create an VPD sysfs entry for supported ISPs only.Andrew Vasquez1-10/+8
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27[SCSI] qla2xxx: Add DMI (Diagnostics Monitoring Interface) support.Andrew Vasquez5-0/+121
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27[SCSI] qla2xxx: Honour 'skip process-login' option during fabric-login IOCB.Andrew Vasquez1-0/+2
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27[SCSI] qla2xxx: Add NVRAM 'Disable Serdes' bit support.Andrew Vasquez3-1/+15
The host section of ISP24xx NVRAMs contain a new bit which allows a user to selectively disable ports of an HBA. These ports (hosts) will not be presented to the midlayer. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27[SCSI] qla2xxx: Resync with latest HBA SSID specification -- 2.2j.Andrew Vasquez1-2/+15
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27[SCSI] qla2xxx: Rework firmware-trace facilities.Andrew Vasquez8-811/+401
- Defer firmware dump-data raw-to-textual conversion to user-space. - Add module parameter (ql2xallocfwdump) to allow for per-HBA allocations of firmware dump memory. - Dump request and response queue data as per firmware group request. - Add extended firmware trace support for ISP24XX/ISP54XX chips. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] SCSI core: Allow QUIESCE -> CANCEL sdev transitionAlan Stern1-0/+1
We have to be able to remove SCSI devices even when they are suspended, so QUIESCE -> CANCEL must be a legal state transition. This patch (as727) adds the transition to the state machine. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] sd/scsi_lib simplify sd_rw_intr and scsi_io_completionLuben Tuikov3-148/+105
This patch simplifies "good_bytes" computation in sd_rw_intr(). sd: "good_bytes" computation is always done in terms of the resolution of the device's medium, since after that it is the number of good bytes we pass around and other layers/contexts (as opposed ot sd) can translate that to their own resolution (block layer:512). It also makes scsi_io_completion() processing more straightforward, eliminating the 3rd argument to the function. It also fixes a couple of bugs like not checking return value, using "break" instead of "return;", etc. I've been running with this patch for some time now on a test (do-it-all) system. Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] aic79xx: remove slave_destroyHannes Reinecke5-81/+36
Even with the latest fixes aic79xx still occasionally triggers the BUG_ON in slave_destroy. Rather than trying to figure out the various levels of interaction here I've decided to remove the callback altogether. The primary reason for the slave_alloc / slave_destroy is to keep an index of pointers to the sdevs associated with a given target. However, by changing the arguments to the affected functions slightly it's possible to avoid the use of that index entirely. The only performance penalty we'll incur is in writing the information for /proc/scsi/XXX, as we'll have to recurse over all available sdevs to find the correct ones. But I doubt that reading from /proc is in any way time-critical. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] HP XP devinfo updateHannes Reinecke1-1/+1
According to Anthony Cheung all HP XP arrays with "OPEN-" types support REPORT_LUN. So there is no reason why we shouldn't use it. Signed-off-by: Anthony Cheung <anthony.cheung@hp.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] megaraid_sas: zcr with fixSumant Patro2-13/+40
The patch adds support for a ZCR controller (Device ID : 0x413). It also has a critical bug fix : Disable controller interrupt before firing INIT cmd to FW. Interrupt is enabled after required initialization is over. This is done to ensure that driver is ready to handle interrupts when it is generated by the controller. Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] ibmvscsi: treat busy and error conditions separatelyDave C Boutcher2-17/+52
This patch fixes a condition where ibmvscsi treats a transport error as a "busy" condition, so no errors were returned to the scsi mid-layer. In a RAID environment this means that I/O hung rather than failing over. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] scsi_debug version 1.79Douglas Gilbert1-195/+1028
- add 'virtual_gb' parameter to simulate large storage (by wrapping in dev_size_mb megabytes of actual ram) - add 'no_lun_0' parameter to skip lun 0 on each target (but still respond as required to INQUIRY + REPORT LUNS) - add well know lu support - add MODE SELECT commands support [pages: 0xa and 0x1c] - add LOG SENSE command support [pages: 0xd and 0x2f] - add READ CAPACITY (16) support - increase number of mode pages supported (to read), mainly transport specific (SAS) mode (sub)pages - add more VPD pages and extend others, including ATA information VPD page - START STOP UNIT now maintains a state machine - READ (16) and WRITE (16) cope with lbas larger than 32 bits (needed for the 'virtual_gb' parameter) - allow single command transfers up to 32 MB - more precise error (sense data) messages Signed-off-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] kmalloc argument switcheroo in recent 53c700 change.Dave Jones1-1/+1
On Wed, Jun 21, 2006 at 07:00:34PM +0000, Linux Kernel wrote: > commit 67d59dfdeb21df2c16dcd478b66177e91178ecd0 > tree ae85703651d81740f4a6cd398f9dd4d6aabe6a2f > parent 6db874fbdbedba5e15e76cc03b42f52ea70338c0 > author James Bottomley <James.Bottomley@steeleye.com> Wed, 14 Jun 2006 07:31:19 -0500 > committer James Bottomley <jejb@mulgrave.il.steeleye.com> Tue, 20 Jun 2006 05:34:01 -0500 > > [SCSI] 53c700: remove reliance on deprecated cmnd fields > ... > > + SDp->hostdata = kmalloc(GFP_KERNEL, sizeof(struct NCR_700_sense)); > + > + if (!SDp->hostdata) > + return -ENOMEM; "I'll take reversed arguments for $100 please Alex". Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: iSER Kconfig and Makefile IB/iser: iSER handling of memory for RDMA IB/iser: iSER RDMA CM (CMA) and IB verbs interaction IB/iser: iSER initiator iSCSI PDU and TX/RX IB/iser: iSCSI iSER transport provider high level code IB/iser: iSCSI iSER transport provider header file IB/uverbs: Remove unnecessary list_del()s IB/uverbs: Don't free wr list when it's known to be empty
2006-06-25[PATCH] advansys section fixesRandy Dunlap1-3/+3
Priority: not critical. Mark 3 functions __init. Saves a little memory. This makes these functions' calls to AdvWaitEEPCmd() (which is __init) be clean (i.e., eliminates text -> init -> text call chain). Fix multiple section mismatch warnings: WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a22) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a4e) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a79) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7aa2) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7abb) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7ae0) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b0c) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b37) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b60) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b79) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7b9e) and 'AdvExeScsiQueue' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7bca) and 'AdvExeScsiQueue' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7bf5) and 'AdvExeScsiQueue' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7c1e) and 'AdvExeScsiQueue' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7c37) and 'AdvExeScsiQueue' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] megaraid_mbox: fix section mismatch warningsRandy Dunlap1-1/+1
Fix section warning: WARNING: drivers/scsi/megaraid/megaraid_mbox.o - Section mismatch: reference to .init.text: from .text between 'megaraid_probe_one' (at offset 0x171e) and 'megaraid_queue_command' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] wd7000: fix section mismatch warningsRandy.Dunlap1-1/+1
From: Randy Dunlap <rdunlap@xenotime.net> Fix section mismatch in wd7000 driver: WARNING: drivers/scsi/wd7000.o - Section mismatch: reference to .init.text: from .text after 'wd7000_detect' (at offset 0xa5d) WARNING: drivers/scsi/wd7000.o - Section mismatch: reference to .init.text: from .text after 'wd7000_detect' (at offset 0xab6) WARNING: drivers/scsi/wd7000.o - Section mismatch: reference to .init.text: from .text after 'wd7000_detect' (at offset 0xb67 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68k: convert mac irq codeRoman Zippel2-10/+4
Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68k: Add the generic dma API functionsRoman Zippel1-4/+4
Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-24[SCSI] qlogicpti: Convert to new SBUS device framework.David S. Miller1-175/+186
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-24[SCSI] esp: Fix bug in esp_remove_common.David S. Miller1-4/+1
Do not try to kfree(esp), scsi_host_put() takes care of that. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-24[SCSI] sparc: Port esp to new SBUS driver layer.David S. Miller2-165/+157
This also turns the driver into a new-style scsi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-24Merge branch 'upstream-linus' of ↵Linus Torvalds25-2179/+6027
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (258 commits) [libata] conversion to new debug scheme, part 1 of $N [PATCH] libata: Add ata_scsi_dev_disabled [libata] Add host lock to struct ata_port [PATCH] libata: implement per-dev EH action mask eh_info->dev_action[] [PATCH] libata-dev: move the CDB-intr DMA blacklisting [PATCH] ahci: disable NCQ support on vt8251 [libata] ahci: add JMicron PCI IDs [libata] sata_nv: add PCI IDs [libata] ahci: Add NVIDIA PCI IDs. [PATCH] libata: convert several bmdma-style controllers to new EH, take #3 [PATCH] sata_via: convert to new EH, take #3 [libata] sata_nv: s/spin_lock_irqsave/spin_lock/ in irq handler [PATCH] sata_nv: add hotplug support [PATCH] sata_nv: convert to new EH [PATCH] sata_nv: better irq handlers [PATCH] sata_nv: simplify constants [PATCH] sata_nv: kill struct nv_host_desc and nv_host [PATCH] sata_nv: kill not-working hotplug code [libata] Update docs to reflect current driver API [PATCH] libata: add host_set->next for legacy two host_sets case, take #3 ...
2006-06-23[PATCH] More BUG_ON conversionEric Sesterhenn7-29/+15
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] vfs: add lock owner argument to flush operationMiklos Szeredi2-2/+2
Pass the POSIX lock owner ID to the flush operation. This is useful for filesystems which don't want to store any locking state in inode->i_flock but want to handle locking/unlocking POSIX locks internally. FUSE is one such filesystem but I think it possible that some network filesystems would need this also. Also add a flag to indicate that a POSIX locking request was generated by close(), so filesystems using the above feature won't send an extra locking request in this case. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k: wd33c93: extra delayRoman Zippel1-0/+4
The wd33c93 needs a small delay before a new command can be started. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[libata] conversion to new debug scheme, part 1 of $NBorislav Petkov1-26/+47
The first 25% of libata-core.c converted to the new debugging scheme. Signed-off-by: <petkov@math.uni-muenster.de> (with addition of ATA_MSG_WARN to standard msg_enable by me) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23[PATCH] libata: Add ata_scsi_dev_disabledBrian King1-10/+31
Separate out parts of ata_scsi_find_dev to be reused in future SAS/SATA patches. Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23[libata] Add host lock to struct ata_portJeff Garzik4-73/+72
Prepare for changes required to support SATA devices attached to SAS HBAs. For these devices we don't want to use host_set at all, since libata will not be the owner of struct scsi_host. Signed-off-by: Brian King <brking@us.ibm.com> (with slight merge modifications made by...) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23[PATCH] libata: implement per-dev EH action mask eh_info->dev_action[]Tejun Heo1-16/+69
Currently, the only per-dev EH action is REVALIDATE. EH used to exploit ehi->dev to do selective revalidation on a ATA bus. However, this is a bit hacky and makes it impossible to request selective revalidation from outside of EH or add another per-dev EH action. This patch adds per-dev EH action mask eh_info->dev_action[] and update EH to use this field for REVALIDATE. Note that per-dev actions can still be specified at port-level and it has the same effect of specifying the action for all devices on the port. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23[PATCH] libata-dev: move the CDB-intr DMA blacklistingAlbert Lee1-10/+9
Move the DMA blacklisting of the CDB-intr devices from ata_check_atapi_dma() to ata_dma_blacklisted(), where it makes more sense. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23[PATCH] ahci: disable NCQ support on vt8251Tejun Heo1-2/+4
vt8251 chokes on NCQ commands. Two different disks from different vendors are showing the same symptom and it seems that the windows driver from via doesn't support NCQ either. Disable NCQ support on this controller for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Aalderd Bouwman <boac@wanadoo.nl> Cc: Bastiaan Jacques <b.jacques@planet.nl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23[libata] ahci: add JMicron PCI IDsJeff Garzik1-0/+6
Originally contributed by Justin @ JMicron. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23[libata] sata_nv: add PCI IDsJeff Garzik1-0/+4
Based on a patch contributed by Andrew Chew @ NVIDIA. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23[libata] ahci: Add NVIDIA PCI IDs.Jeff Garzik1-0/+18
Based on a patch by Andrew Chew @ NVIDIA. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23Merge branch 'master' into upstreamJeff Garzik122-45064/+6361
Conflicts: drivers/scsi/libata-core.c drivers/scsi/libata-scsi.c include/linux/pci_ids.h
2006-06-22IB/iser: iSER Kconfig and MakefileOr Gerlitz1-0/+1
Kconfig and Makefile for iSER. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-21[PATCH] PCI: Move various PCI IDs to header fileBrent Casavant2-29/+6
Move various QLogic, Vitesse, and Intel storage controller PCI IDs to the main header file. Signed-off-by: Brent Casavant <bcasavan@sgi.com> Acked-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds119-45024/+6349
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (85 commits) [SCSI] 53c700: remove reliance on deprecated cmnd fields [SCSI] hptiop: don't use cmnd->bufflen [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver [SCSI] aacraid: small misc. cleanups [SCSI] aacraid: Update supported product information [SCSI] aacraid: Fix return code interpretation [SCSI] scsi_transport_sas: fix panic in sas_free_rphy [SCSI] remove RQ_SCSI_* flags [SCSI] remove scsi_request infrastructure [SCSI] mptfusion: change driver revision to 3.03.10 [SCSI] mptfc: abort of board reset leaves port dead requiring reboot [SCSI] mptfc: fix fibre channel infinite request/response loop [SCSI] mptfc: set fibre channel fw target missing timers to one second [SCSI] mptfusion: move fc event/reset handling to mptfc [SCSI] spi transport: don't allow dt to be set on SE or HVD buses [SCSI] aic7xxx: expose the bus setting to sysfs [SCSI] scsi: remove Documentation/scsi/cpqfc.txt [SCSI] drivers/scsi: Use ARRAY_SIZE macro [SCSI] Remove last page_address from dc395x.c [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver ... Fixed up conflicts in drivers/message/fusion/mptbase.c manually (due to the sparc interrupt cleanups)
2006-06-20[PATCH] libata: convert several bmdma-style controllers to new EH, take #3Tejun Heo4-16/+21
Convert sata_sis, svw, uli and vsc drivers to new EH. All the drivers used to specify ATA_FLAG_SATA_RESET to tell libata to use SATA hardreset instead of SRST. This patch makes all the converted drivers use the standard bmdma error handler which uses both SRST and SATA hardreset. All the controllers should be able to perform SRST but still needs verification. If some of the controllers can't do SRST, it will be very easy to spot as it will show up during boot probing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-20[PATCH] sata_via: convert to new EH, take #3Tejun Heo1-6/+6
Convert sata_via to new EH. vt6420 used ATA_FLAG_SRST while vt6421 used ATA_FLAG_SATA_RESET. This difference seems to be an accident rather than intended. This patch makes both flavors use ata_bmdma_error_handler() which makes use of both SRST and SATA hardreset. This behavior change is intended and if it breaks anything, it should be very easy to spot. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-20[libata] sata_nv: s/spin_lock_irqsave/spin_lock/ in irq handlerJeff Garzik1-6/+4
We don't need to use the heavier spin lock in the irq handler. It's quite possible we can do this in nv_generic_interrupt() as well, but I didn't take the time to pursue that train of thought. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-20[PATCH] sata_nv: add hotplug supportTejun Heo1-1/+8
Add hotplug support. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>