summaryrefslogtreecommitdiff
path: root/drivers/scsi/ufs/ufshcd.h
AgeCommit message (Expand)AuthorFilesLines
2016-12-09scsi: ufs: add quirk to increase host PA_SaveConfigTimeSubhash Jadavani1-2/+10
2016-11-23scsi: ufs: introduce UFSHCD_QUIRK_PRDT_BYTE_GRAN quirkKiwoong Kim1-0/+6
2016-11-12scsi: ufs: introduce hibern8_notify callbackKiwoong Kim1-0/+12
2016-11-12scsi: ufs: introduce setup_task_mgmtKiwoong Kim1-0/+10
2016-11-12scsi: ufs: introduce setup_xfer_req callbackKiwoong Kim1-0/+10
2016-11-09scsi: ufshcd: Fix possible unclocked register accessSubhash Jadavani1-3/+5
2016-07-13ufs: add support for DesignWare ControllerJoao Pinto1-0/+7
2016-03-15scsi: ufs-qcom: enable/disable the device ref clockYaniv Gardi1-0/+9
2016-03-15scsi: ufs: tune UniPro parameters to optimize hibern8 exit timeYaniv Gardi1-0/+1
2016-03-15scsi: ufs: handle non spec compliant bkops behaviour by deviceYaniv Gardi1-0/+6
2016-03-15scsi: ufs: separate device and host quirksYaniv Gardi1-0/+3
2016-03-15scsi: ufs: add support to read device and string descriptorsYaniv Gardi1-0/+7
2016-03-15scsi: ufs: verify hba controller hce reg valueYaniv Gardi1-9/+3
2016-03-15scsi: ufs-qcom: add number of lanes per directionYaniv Gardi1-0/+2
2016-02-24scsi: ufs: fix typo in commentTomas Winkler1-1/+1
2016-02-24scsi: ufs: retry failed query flag requestsYaniv Gardi1-0/+4
2015-11-10scsi: ufs-qcom: add QUniPro hardware support and power optimizationsYaniv Gardi1-10/+17
2015-11-10scsi: ufs-qcom: add debug prints for test busYaniv Gardi1-0/+8
2015-11-10scsi: ufs: make the UFS variant a platform deviceYaniv Gardi1-0/+1
2015-11-10scsi: ufs: creates wrapper functions for vopsYaniv Gardi1-0/+98
2015-11-10scsi: ufs: add ufshcd_get_variant ufshcd_set_variantYaniv Gardi1-0/+21
2015-06-02scsi: ufs: add quirk to handle broken UFS HCI versionYaniv Gardi1-0/+10
2015-06-02scsi: ufs: introduce UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE quirkYaniv Gardi1-0/+7
2015-06-02scsi: ufs: introduce a broken PA_RXHSUNTERMCAP quirkYaniv Gardi1-0/+7
2015-06-02scsi: ufs: provide a quirk to disable the LCCYaniv Gardi1-0/+8
2015-06-02scsi: ufs: introduce the capability and quirk for interrupt aggregationYaniv Gardi1-1/+20
2015-04-10ufs: add support to allow non standard behaviours (quirks)Yaniv Gardi1-0/+9
2014-11-20ufs: fix reference counting of W-LUsAkinobu Mita1-2/+0
2014-10-01ufs: definitions for phy interfaceDolev Raviv1-0/+18
2014-10-01ufs: tune bkops while power managment eventsSubhash Jadavani1-0/+7
2014-10-01ufs: Add support for clock scaling using devfreq frameworkSahitya Tummala1-0/+20
2014-10-01ufs: Add freq-table-hz property for UFS deviceSahitya Tummala1-0/+2
2014-10-01ufs: Add support for clock gatingSahitya Tummala1-0/+51
2014-10-01ufs: refactor configuring power modeDolev Raviv1-0/+27
2014-10-01ufs: add UFS power management supportSubhash Jadavani1-5/+71
2014-10-01ufs: introduce well known logical unit in ufsSubhash Jadavani1-1/+1
2014-10-01ufs: manually add well known logical unitsSubhash Jadavani1-0/+7
2014-10-01ufs: Active Power Mode - configuring bActiveICCLevelYaniv Gardi1-0/+13
2014-10-01ufs: improve init sequenceSujit Reddy Thumma1-0/+2
2014-10-01ufs: Add clock initialization supportSujit Reddy Thumma1-0/+18
2014-10-01ufs: Add regulator enable supportSujit Reddy Thumma1-0/+3
2014-10-01ufs: Allow vendor specific initializationSujit Reddy Thumma1-2/+32
2014-05-28scsi: ufs: Improve UFS fatal error handlingSujit Reddy Thumma1-2/+8
2014-05-28scsi: ufs: Fix device and host reset methodsSujit Reddy Thumma1-0/+2
2014-05-28scsi: ufs: Fix broken task management command implementationSujit Reddy Thumma1-2/+6
2014-05-28scsi: ufs: make undeclared functions staticSujit Reddy Thumma1-0/+2
2013-09-07[SCSI] ufs: add operation for the uic power mode changeSeungwon Jeon1-0/+3
2013-09-07[SCSI] ufs: add dme configuration primitivesSeungwon Jeon1-0/+51
2013-08-26[SCSI] ufs: Add support for host assisted background operationsSujit Reddy Thumma1-0/+10
2013-08-26[SCSI] ufs: Set fDeviceInit flag to initiate device initializationDolev Raviv1-0/+20
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-26 08:33:46 +0300