| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 11d9874c4204a785f43d899a1ab12f9dc8d9de3e ]
Hyper-V uses a VHD or VHDX file on the host as the underlying storage for a
virtual disk. The VHD/VHDX file format is a sparse format where real disk
space on the host is assigned in chunks that the VHD/VHDX file format calls
the BlockSize. This BlockSize is not to be confused with the 512-byte (or
4096-byte) sector size of the underlying storage device. The default block
size for a new VHD/VHDX file is 32 Mbytes. When a guest VM touches any
disk space within a 32 Mbyte chunk of the VHD/VHDX file, Hyper-V allocates
32 Mbytes of real disk space for that section of the VHD/VHDX. Similarly,
if a discard operation is done that covers an entire 32 Mbyte chunk,
Hyper-V will free the real disk space for that portion of the VHD/VHDX.
This BlockSize is surfaced in Linux as the "discard_granularity" in
/sys/block/sd<x>/queue, which makes sense.
Hyper-V also has differencing disks that can overlay a VHD/VHDX file to
capture changes to the VHD/VHDX while preserving the original VHD/VHDX.
One example of this differencing functionality is for VM snapshots. When a
snapshot is created, a differencing disk is created. If the snapshot is
rolled back, Hyper-V can just delete the differencing disk, and the VM will
see the original disk contents at the time the snapshot was taken.
Differencing disks are used in other scenarios as well.
The BlockSize for a differencing disk defaults to 2 Mbytes, not 32 Mbytes.
The smaller default is used because changes to differencing disks are
typically scattered all over, and Hyper-V doesn't want to allocate 32
Mbytes of real disk space for a stray write here or there. The smaller
BlockSize provides more efficient use of real disk space.
When a differencing disk is added to a VHD/VHDX, Hyper-V reports
UNIT_ATTENTION with a sense code indicating "Operating parameters have
changed", because the value of discard_granularity should be changed to 2
Mbytes. When the differencing disk is removed, discard_granularity should
be changed back to 32 Mbytes. However, current code simply reports a
message from scsi_report_sense() and the value of
/sys/block/sd<x>/queue/discard_granularity is not updated. The message
isn't very actionable by a sysadmin.
Fix this by having the storvsc driver check for the sense code indicating
that the underly VHD/VHDX block size has changed, and do a rescan of the
device to pick up the new discard_granularity. With this change the entire
transition to/from differencing disks is handled automatically and
transparently, with no confusing messages being output.
Link: https://lore.kernel.org/r/1677516514-86060-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Pull in remaining patches from the 6.2 queue.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (target, ufs, smartpqi, lpfc).
There are some core changes, mostly around reworking some of our user
context assumptions in device put and moving some code around.
The remaining updates are bug fixes and minor changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits)
scsi: sg: Fix get_user() in call sg_scsi_ioctl()
scsi: megaraid_sas: Fix some spelling mistakes in comment
scsi: core: Use SCSI_SCAN_INITIAL in do_scsi_scan_host()
scsi: core: Use SCSI_SCAN_RESCAN in __scsi_add_device()
scsi: ufs: ufs-mediatek: Remove unnecessary return code
scsi: ufs: core: Fix the polling implementation
scsi: libsas: Do not export sas_ata_wait_after_reset()
scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset
scsi: libsas: Add smp_ata_check_ready_type()
scsi: Revert "scsi: hisi_sas: Don't send bcast events from HW during nexus HA reset"
scsi: Revert "scsi: hisi_sas: Drain bcast events in hisi_sas_rescan_topology()"
scsi: ufs: ufs-mediatek: Modify the return value
scsi: ufs: ufs-mediatek: Remove unneeded code
scsi: device_handler: alua: Call scsi_device_put() from non-atomic context
scsi: device_handler: alua: Revert "Move a scsi_device_put() call out of alua_check_vpd()"
scsi: snic: Fix possible UAF in snic_tgt_create()
scsi: qla2xxx: Initialize vha->unknown_atio_[list, work] for NPIV hosts
scsi: qla2xxx: Remove duplicate of vha->iocb_work initialization
scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
scsi: sd: Use 16-byte SYNCHRONIZE CACHE on ZBC devices
...
|
|
storvsc_queuecommand() maps the scatter/gather list using scsi_dma_map(),
which in a confidential VM allocates swiotlb bounce buffers. If the I/O
submission fails in storvsc_do_io(), the I/O is typically retried by higher
level code, but the bounce buffer memory is never freed. The mostly like
cause of I/O submission failure is a full VMBus channel ring buffer, which
is not uncommon under high I/O loads. Eventually enough bounce buffer
memory leaks that the confidential VM can't do any I/O. The same problem
can arise in a non-confidential VM with kernel boot parameter
swiotlb=force.
Fix this by doing scsi_dma_unmap() in the case of an I/O submission
error, which frees the bounce buffer memory.
Fixes: 743b237c3a7b ("scsi: storvsc: Add Isolation VM support for storvsc driver")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1670183564-76254-1-git-send-email-mikelley@microsoft.com
Tested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Current handling of the srb_status is incorrect. Commit 52e1b3b3daa9
("scsi: storvsc: Correctly handle multiple flags in srb_status")
is based on srb_status being a set of flags, when in fact only the
2 high order bits are flags and the remaining 6 bits are an integer
status. Because the integer values of interest mostly look like flags,
the code actually works when treated that way.
But in the interest of correctness going forward, fix this by treating
the low 6 bits of srb_status as an integer status code. Add handling
for SRB_STATUS_INVALID_REQUEST, which was the original intent of commit
52e1b3b3daa9. Furthermore, treat the ERROR, ABORTED, and INVALID_REQUEST
srb status codes as essentially equivalent for the cases we care about.
There's no harm in doing so, and it isn't always clear which status code
current or older versions of Hyper-V report for particular conditions.
Treating the srb status codes as equivalent has the additional benefit
of ensuring that capacity change events result in an immediate rescan
so that the new size is known to Linux. Existing code checks SCSI
sense data for capacity change events when the srb status is ABORTED.
But capacity change events are also being observed when Hyper-V reports
the srb status as ERROR. Without the immediate rescan, the new size
isn't known until something else causes a rescan (such as running
fdisk to expand a partition), and in the meantime, tools such as "lsblk"
continue to report the old size.
Fixes: 52e1b3b3daa9 ("scsi: storvsc: Correctly handle multiple flags in srb_status")
Reported-by: Juan Tian <juantian@microsoft.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1668019722-1983-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Commit 6600593cbd93 ("block: rename BLK_EH_NOT_HANDLED to BLK_EH_DONE")
made it impossible for .eh_timed_out() implementations to call
scsi_done() without causing a crash.
Restore support for SCSI timeout handlers to call scsi_done() as follows:
* Change all .eh_timed_out() handlers as follows:
- Change the return type into enum scsi_timeout_action.
- Change BLK_EH_RESET_TIMER into SCSI_EH_RESET_TIMER.
- Change BLK_EH_DONE into SCSI_EH_NOT_HANDLED.
* In scsi_timeout(), convert the SCSI_EH_* values into BLK_EH_* values.
Reviewed-by: Lee Duncan <lduncan@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-3-bvanassche@acm.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Remove unnecessary delay while probing for VMBus (Stanislav
Kinsburskiy)
- Optimize vmbus_on_event (Saurabh Sengar)
- Fix a race in Hyper-V DRM driver (Saurabh Sengar)
- Miscellaneous clean-up patches from various people
* tag 'hyperv-next-signed-20221009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Replace kmap() with kmap_local_page()
drm/hyperv: Add ratelimit on error message
hyperv: simplify and rename generate_guest_id
Drivers: hv: vmbus: Split memcpy of flex-array
scsi: storvsc: remove an extraneous "to" in a comment
Drivers: hv: vmbus: Don't wait for the ACPI device upon initialization
Drivers: hv: vmbus: Use PCI_VENDOR_ID_MICROSOFT for better discoverability
Drivers: hv: vmbus: Fix kernel-doc
drm/hyperv: Don't overwrite dirt_needed value set by host
Drivers: hv: vmbus: Optimize vmbus_on_event
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr,
mpt3sas, target). The biggest change (from my biased viewpoint) being
that the mpi3mr now attached to the SAS transport class, making it the
first fusion type device to do so.
Beyond the usual bug fixing and security class reworks, there aren't a
huge number of core changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()
scsi: mpi3mr: Remove unnecessary cast
scsi: stex: Properly zero out the passthrough command structure
scsi: mpi3mr: Update driver version to 8.2.0.3.0
scsi: mpi3mr: Fix scheduling while atomic type bug
scsi: mpi3mr: Scan the devices during resume time
scsi: mpi3mr: Free enclosure objects during driver unload
scsi: mpi3mr: Handle 0xF003 Fault Code
scsi: mpi3mr: Graceful handling of surprise removal of PCIe HBA
scsi: mpi3mr: Schedule IRQ kthreads only on non-RT kernels
scsi: mpi3mr: Support new power management framework
scsi: mpi3mr: Update mpi3 header files
scsi: mpt3sas: Revert "scsi: mpt3sas: Fix ioc->base_readl() use"
scsi: mpt3sas: Revert "scsi: mpt3sas: Fix writel() use"
scsi: wd33c93: Remove dead code related to the long-gone config WD33C93_PIO
scsi: core: Add I/O timeout count for SCSI device
scsi: qedf: Populate sysfs attributes for vport
scsi: pm8001: Replace one-element array with flexible-array member
scsi: 3w-xxxx: Replace one-element array with flexible-array member
scsi: hptiop: Replace one-element array with flexible-array member in struct hpt_iop_request_ioctl_command()
...
|
|
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Link: https://lore.kernel.org/r/20220908130754.34999-1-wangjianli@cdjrlc.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
In the vmbus_on_event loop, 2 jiffies timer will not serve the purpose if
callback_fn takes longer. For effective use move this check inside of
callback functions where needed. Out of all the VMbus drivers using
vmbus_on_event, only storvsc has a high packet volume, thus add this limit
only in storvsc callback for now.
There is no apparent benefit of loop itself because this tasklet will be
scheduled anyway again if there are packets left in ring buffer. This
patch removes this unnecessary loop as well.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1658741848-4210-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
DID_TARGET_FAILURE is internal to the SCSI layer. Drivers must not use it
because:
1. It's not propagated upwards, so SG IO/passthrough users will not see an
error and think a command was successful.
2. There is no handling for it in scsi_decide_disposition() so it results
in the SCSI error handling running.
It looks like the driver wanted a hard failure so swap it with
DID_BAD_TARGET.
Link: https://lore.kernel.org/r/20220812010027.8251-3-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
storvsc_error_wq workqueue should not be marked as WQ_MEM_RECLAIM as it
doesn't need to make forward progress under memory pressure. Marking this
workqueue as WQ_MEM_RECLAIM may cause deadlock while flushing a
non-WQ_MEM_RECLAIM workqueue. In the current state it causes the following
warning:
[ 14.506347] ------------[ cut here ]------------
[ 14.506354] workqueue: WQ_MEM_RECLAIM storvsc_error_wq_0:storvsc_remove_lun is flushing !WQ_MEM_RECLAIM events_freezable_power_:disk_events_workfn
[ 14.506360] WARNING: CPU: 0 PID: 8 at <-snip->kernel/workqueue.c:2623 check_flush_dependency+0xb5/0x130
[ 14.506390] CPU: 0 PID: 8 Comm: kworker/u4:0 Not tainted 5.4.0-1086-azure #91~18.04.1-Ubuntu
[ 14.506391] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022
[ 14.506393] Workqueue: storvsc_error_wq_0 storvsc_remove_lun
[ 14.506395] RIP: 0010:check_flush_dependency+0xb5/0x130
<-snip->
[ 14.506408] Call Trace:
[ 14.506412] __flush_work+0xf1/0x1c0
[ 14.506414] __cancel_work_timer+0x12f/0x1b0
[ 14.506417] ? kernfs_put+0xf0/0x190
[ 14.506418] cancel_delayed_work_sync+0x13/0x20
[ 14.506420] disk_block_events+0x78/0x80
[ 14.506421] del_gendisk+0x3d/0x2f0
[ 14.506423] sr_remove+0x28/0x70
[ 14.506427] device_release_driver_internal+0xef/0x1c0
[ 14.506428] device_release_driver+0x12/0x20
[ 14.506429] bus_remove_device+0xe1/0x150
[ 14.506431] device_del+0x167/0x380
[ 14.506432] __scsi_remove_device+0x11d/0x150
[ 14.506433] scsi_remove_device+0x26/0x40
[ 14.506434] storvsc_remove_lun+0x40/0x60
[ 14.506436] process_one_work+0x209/0x400
[ 14.506437] worker_thread+0x34/0x400
[ 14.506439] kthread+0x121/0x140
[ 14.506440] ? process_one_work+0x400/0x400
[ 14.506441] ? kthread_park+0x90/0x90
[ 14.506443] ret_from_fork+0x35/0x40
[ 14.506445] ---[ end trace 2d9633159fdc6ee7 ]---
Link: https://lore.kernel.org/r/1659628534-17539-1-git-send-email-ssengar@linux.microsoft.com
Fixes: 436ad9413353 ("scsi: storvsc: Allow only one remove lun work item to be issued per lun")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Current code is based on the idea that the max number of SGL entries
also determines the max size of an I/O request. While this idea was
true in older versions of the storvsc driver when SGL entry length
was limited to 4 Kbytes, commit 3d9c3dcc58e9 ("scsi: storvsc: Enable
scatterlist entry lengths > 4Kbytes") removed that limitation. It's
now theoretically possible for the block layer to send requests that
exceed the maximum size supported by Hyper-V. This problem doesn't
currently happen in practice because the block layer defaults to a
512 Kbyte maximum, while Hyper-V in Azure supports 2 Mbyte I/O sizes.
But some future configuration of Hyper-V could have a smaller max I/O
size, and the block layer could exceed that max.
Fix this by correctly setting max_sectors as well as sg_tablesize to
reflect the maximum I/O size that Hyper-V reports. While allowing
I/O sizes larger than the block layer default of 512 Kbytes doesn’t
provide any noticeable performance benefit in the tests we ran, it's
still appropriate to report the correct underlying Hyper-V capabilities
to the Linux block layer.
Also tweak the virt_boundary_mask to reflect that the required
alignment derives from Hyper-V communication using a 4 Kbyte page size,
and not on the guest page size, which might be bigger (eg. ARM64).
Link: https://lore.kernel.org/r/1655190355-28722-1-git-send-email-ssengar@linux.microsoft.com
Fixes: 3d9c3dcc58e9 ("scsi: storvsc: Enable scatter list entry lengths > 4Kbytes")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes plus other trivial updates.
The major change of note is moving ufs out of scsi and a minor update
to lpfc vmid handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter
scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters
scsi: mpi3mr: Fix kernel-doc
scsi: lpfc: Add support for ATTO Fibre Channel devices
scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
scsi: sd_zbc: Prevent zone information memory leak
scsi: sd: Fix potential NULL pointer dereference
scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings
scsi: myrb: Fix up null pointer access on myrb_cleanup()
scsi: core: Unexport scsi_bus_type
scsi: sd: Don't call blk_cleanup_disk() in sd_probe()
scsi: ufs: ufshcd: Delete unnecessary NULL check
scsi: isci: Fix typo in comment
scsi: pmcraid: Fix typo in comment
scsi: smartpqi: Fix typo in comment
scsi: qedf: Fix typo in comment
scsi: esas2r: Fix typo in comment
scsi: storvsc: Fix typo in comment
scsi: ufs: Split the drivers/scsi/ufs directory
scsi: qla1280: Remove redundant variable
...
|
|
The latest storvsc code has already removed the support for windows 7 and
earlier. There is still some code logic remaining which is there to support
pre Windows 8 OS. This patch removes these stale logic.
This patch majorly does three things :
1. Removes vmscsi_size_delta and its logic, as the vmscsi_request struct is
same for all the OS post windows 8 there is no need of delta.
2. Simplify sense_buffer_size logic, as there is single buffer size for
all the post windows 8 OS.
3. Embed the vmscsi_win8_extension structure inside the vmscsi_request,
as there is no separate handling required for different OS.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1653478022-26621-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Spelling mistake (triple letters) in comment. Detected with the help of
Coccinelle.
Link: https://lore.kernel.org/r/20220521111145.81697-12-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The storvsc driver has special case code for running on the first released
versions of Hyper-V: 2008 and 2008 R2/Windows 7. These versions are now
out of support (except for extended security updates) and lack support
for performance features like multiple VMbus channels that are needed for
effective production usage of Linux guests.
The negotiation of the VMbus protocol versions required by these old
Hyper-V versions has been removed from the VMbus driver. So now remove
the handling of these VMbus protocol versions from the storvsc driver.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/1651509391-2058-3-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Fix possible memory leak in error path of storvsc_queuecommand() when
DMA mapping fails.
Signed-off-by: Juan Vazquez <juvazq@linux.microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20220109001758.6401-1-juvazq@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The unsigned variable sg_count is being assigned a return value
from the call to scsi_dma_map() that can return -ENOMEM.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211227040311.54584-1-yuehaibing@huawei.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
In Isolation VM, all shared memory with host needs to mark visible
to host via hvcall. vmbus_establish_gpadl() has already done it for
storvsc rx/tx ring buffer. The page buffer used by vmbus_sendpacket_
mpb_desc() still needs to be handled. Use DMA API(scsi_dma_map/unmap)
to map these memory during sending/receiving packet and return swiotlb
bounce buffer dma address. In Isolation VM, swiotlb bounce buffer is
marked to be visible to host and the swiotlb force mode is enabled.
Set device's dma min align mask to HV_HYP_PAGE_SIZE - 1 in order to
keep the original data offset in the bounce buffer.
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211213071407.314309-5-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
|
|
Conditional statements are faster than indirect calls. Hence call
scsi_done() directly.
Link: https://lore.kernel.org/r/20211007202923.2174984-74-bvanassche@acm.org
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The validation on the length of incoming packets performed in
storvsc_on_channel_callback() does not apply to unsolicited packets with ID
of 0 sent by Hyper-V. Adjust the validation for such unsolicited packets.
Link: https://lore.kernel.org/r/20211007122828.469289-1-parri.andrea@gmail.com
Fixes: 91b1b640b834b2 ("scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()")
Reported-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas).
The core change causing the most churn was replacing the command
request field request with a macro, allowing us to offset map to it
and remove the redundant field; the same was also done for the tag
field.
The most impactful change is the final removal of scsi_ioctl, which
has been deprecated for over a decade"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
scsi: ufs: ufs-exynos: Fix static checker warning
scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Copyright updates for 14.0.0.1 patches
scsi: lpfc: Update lpfc version to 14.0.0.1
scsi: lpfc: Add bsg support for retrieving adapter cmf data
scsi: lpfc: Add cmf_info sysfs entry
scsi: lpfc: Add debugfs support for cm framework buffers
scsi: lpfc: Add support for maintaining the cm statistics buffer
scsi: lpfc: Add rx monitoring statistics
scsi: lpfc: Add support for the CM framework
scsi: lpfc: Add cmfsync WQE support
scsi: lpfc: Add support for cm enablement buffer
scsi: lpfc: Add cm statistics buffer support
scsi: lpfc: Add EDC ELS support
scsi: lpfc: Expand FPIN and RDF receive logging
scsi: lpfc: Add MIB feature enablement support
scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
scsi: fc: Add EDC ELS definition
...
|
|
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20210809230355.8186-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 08f76547f08d ("scsi: storvsc: Update error logging") added more
robust logging of errors, particularly those reported as Hyper-V
errors. But this change produces extra logging noise in that
TEST_UNIT_READY may report errors during the normal course of detecting
device adds and removes.
Fix this by logging TEST_UNIT_READY errors as warnings, so that log lines
are produced only if the storvsc log level is changed to WARN level on the
kernel boot line.
Link: https://lore.kernel.org/r/1628269970-87876-1-git-send-email-mikelley@microsoft.com
Fixes: 08f76547f08d ("scsi: storvsc: Update error logging")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, ibmvfc,
megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
elx and mpi3mr being new drivers.
The major core change is a rework to drop the status byte handling
macros and the old bit shifted definitions and the rest of the updates
are minor fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
scsi: aha1740: Avoid over-read of sense buffer
scsi: arcmsr: Avoid over-read of sense buffer
scsi: ips: Avoid over-read of sense buffer
scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
scsi: elx: libefc: Fix less than zero comparison of a unsigned int
scsi: elx: efct: Fix pointer error checking in debugfs init
scsi: elx: efct: Fix is_originator return code type
scsi: elx: efct: Fix link error for _bad_cmpxchg
scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
scsi: elx: efct: Fix error handling in efct_hw_init()
scsi: elx: efct: Remove redundant initialization of variable lun
scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
scsi: lpfc: Fix build error in lpfc_scsi.c
scsi: target: iscsi: Remove redundant continue statement
scsi: qla4xxx: Remove redundant continue statement
scsi: ppa: Switch to use module_parport_driver()
scsi: imm: Switch to use module_parport_driver()
scsi: mpt3sas: Fix error return value in _scsih_expander_add()
...
|
|
Hyper-V is observed to sometimes set multiple flags in the srb_status, such
as ABORTED and ERROR. Current code in storvsc_handle_error() handles only a
single flag being set, and does nothing when multiple flags are set. Fix
this by changing the case statement into a series of "if" statements
testing individual flags. The functionality for handling each flag is
unchanged.
Link: https://lore.kernel.org/r/1622827263-12516-3-git-send-email-mikelley@microsoft.com
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When an I/O error is reported by the underlying Hyper-V host, current code
provides details only when the logging level is set to WARN, making it more
difficult to diagnose problems in live customer situations. Fix this by
reporting details at ERROR level, which is the default. Also add more
information, including the Hyper-V error code, and the tag # so that the
message can be matched with messages at the SCSI and blk-mq levels.
Also, sense information logging is inconsistent and duplicative. The
existence of sense info is first logged at WARN level, and then full sense
info is logged at ERROR level. Fix this by removing the logging of the
existence of sense info, and change the logging of full sense info to WARN
level in favor of letting the generic SCSI layer handle such logging. With
the change to WARN level, it's no longer necessary to filter out as noise
any NOT READY sense info generated by the virtual DVD device.
Link: https://lore.kernel.org/r/1622827263-12516-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
As general cleanup and in preparation for subsequent patches:
- Use min() instead of open coding.
- Use set_host_byte() instead of open coding access to scsi_status
field.
- Collapse nested "if" statements to reduce indentation.
- Fix other indentation.
- Remove extra blank lines.
No functional changes.
[mkp: dropped status_byte() which no longer exists]
Link: https://lore.kernel.org/r/1622827263-12516-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use blk_mq_unique_tag() to generate requestIDs for StorVSC, avoiding
all issues with allocating enough entries in the VMbus requestor.
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210510210841.370472-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Pointers to ring-buffer packets sent by Hyper-V are used within the
guest VM. Hyper-V can send packets with erroneous values or modify
packet fields after they are processed by the guest. To defend
against these scenarios, return a copy of the incoming VMBus packet
after validating its length and offset fields in hv_pkt_iter_first().
In this way, the packet can no longer be modified by the host.
Signed-off-by: Andres Beltran <lkmlabelt@gmail.com>
Co-developed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210408161439.341988-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
storvsc currently sets .dma_boundary to limit scatterlist entries to 4
Kbytes, which is less efficient with huge pages that offer large chunks of
contiguous physical memory. Improve the algorithm for creating the Hyper-V
guest physical address PFN array so that scatterlist entries with lengths >
4Kbytes are handled. As a result, remove the .dma_boundary setting.
The improved algorithm also adds support for scatterlist entries with
offsets >= 4Kbytes, which is supported by many other SCSI low-level
drivers. And it retains support for architectures where possibly PAGE_SIZE
!= HV_HYP_PAGE_SIZE (such as ARM64).
Link: https://lore.kernel.org/r/1614120294-1930-1-git-send-email-mikelley@microsoft.com
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add ability to set the number of hardware queues with new module parameter,
storvsc_max_hw_queues. The default value remains the number of CPUs. This
functionality is useful in some environments (e.g. Microsoft Azure) where
decreasing the number of hardware queues has been shown to improve
performance.
Link: https://lore.kernel.org/r/20210224232948.4651-1-melanieplageman@gmail.com
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Melanie Plageman (Microsoft) <melanieplageman@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ILLEGAL_COMMAND is a sense code, not a driver byte.
Link: https://lore.kernel.org/r/20210113090500.129644-33-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
storvsc_on_channel_callback()
Check that the packet is of the expected size at least, don't copy data
past the packet.
Link: https://lore.kernel.org/r/20201217203321.4539-4-parri.andrea@gmail.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reported-by: Saruhan Karademir <skarade@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
vmscsi_size_delta can be written concurrently by multiple instances of
storvsc_probe(), corresponding to multiple synthetic IDE/SCSI devices;
cf. storvsc_drv's probe_type == PROBE_PREFER_ASYNCHRONOUS. Change the
global variable vmscsi_size_delta to per-synthetic-IDE/SCSI-device.
Link: https://lore.kernel.org/r/20201217203321.4539-3-parri.andrea@gmail.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Suggested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Current code overestimates the value of max_outstanding_req_per_channel for
Win8 and newer hosts, since vmscsi_size_delta is set to the initial value
of sizeof(vmscsi_win8_extension) rather than zero. This may lead to wrong
decisions when using ring_avail_percent_lowater equals to zero. The
estimate of max_outstanding_req_per_channel is 'exact' for Win7 and older
hosts. A better choice, keeping the algorithm for the estimation simple,
is to err the other way around, i.e., to underestimate for Win7 and older
but to use the exact value for Win8 and newer.
Link: https://lore.kernel.org/r/20201217203321.4539-2-parri.andrea@gmail.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Suggested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- harden VMBus (Andres Beltran)
- clean up VMBus driver (Matheus Castello)
- fix hv_balloon reporting (Vitaly Kuznetsov)
- fix a potential OOB issue (Andrea Parri)
- remove an obsolete TODO item (Stefan Eschenbacher)
* tag 'hyperv-next-signed-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hv_balloon: do adjust_managed_page_count() when ballooning/un-ballooning
hv_balloon: simplify math in alloc_balloon_pages()
drivers/hv: remove obsolete TODO and fix misleading typo in comment
drivers: hv: vmbus: Fix checkpatch SPLIT_STRING
hv_netvsc: Validate number of allocated sub-channels
drivers: hv: vmbus: Fix call msleep using < 20ms
drivers: hv: vmbus: Fix checkpatch LINE_SPACING
drivers: hv: vmbus: Replace symbolic permissions by octal permissions
drivers: hv: Fix hyperv_record_panic_msg path on comment
hv_netvsc: Use vmbus_requestor to generate transaction IDs for VMBus hardening
scsi: storvsc: Use vmbus_requestor to generate transaction IDs for VMBus hardening
Drivers: hv: vmbus: Add vmbus_requestor data structure for VMBus hardening
|
|
storvsc_on_channel_callback()"
This reverts commit 3b8c72d076c42bf27284cda7b2b2b522810686f8.
Dexuan reported a regression where StorVSC fails to probe a device (and
where, consequently, the VM may fail to boot). The root-cause analysis led
to a long-standing race condition that is exposed by the validation /commit
in question. Let's put the new validation aside until a proper solution
for that race condition is in place.
Link: https://lore.kernel.org/r/20201211131404.21359-1-parri.andrea@gmail.com
Fixes: 3b8c72d076c4 ("scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()")
Cc: Dexuan Cui <decui@microsoft.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
storvsc_on_channel_callback()
Check that the packet is of the expected size at least, don't copy data
past the packet.
Link: https://lore.kernel.org/r/20201118145348.109879-1-parri.andrea@gmail.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reported-by: Saruhan Karademir <skarade@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Return -ENOMEM from the error handling case instead of 0.
Link: https://lore.kernel.org/r/20201127030206.104616-1-jingxiangfeng@huawei.com
Fixes: 436ad9413353 ("scsi: storvsc: Allow only one remove lun work item to be issued per lun")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
hardening
Currently, pointers to guest memory are passed to Hyper-V as
transaction IDs in storvsc. In the face of errors or malicious
behavior in Hyper-V, storvsc should not expose or trust the transaction
IDs returned by Hyper-V to be valid guest memory addresses. Instead,
use small integers generated by vmbus_requestor as requests
(transaction) IDs.
Signed-off-by: Andres Beltran <lkmlabelt@gmail.com>
Co-developed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Link: https://lore.kernel.org/r/20201109100402.8946-3-parri.andrea@gmail.com
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Hyper-V always use 4k page size (HV_HYP_PAGE_SIZE), so when
communicating with Hyper-V, a guest should always use HV_HYP_PAGE_SIZE
as the unit for page related data. For storvsc, the data is
vmbus_packet_mpb_array. And since in scsi_cmnd, sglist of pages (in unit
of PAGE_SIZE) is used, we need convert pages in the sglist of scsi_cmnd
into Hyper-V pages in vmbus_packet_mpb_array.
This patch does the conversion by dividing pages in sglist into Hyper-V
pages, offset and indexes in vmbus_packet_mpb_array are recalculated
accordingly.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200916034817.30282-12-boqun.feng@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc,
hpsa, zfcp, scsi_debug) and minor bug fixes.
We also have a huge docbook fix update like most other subsystems and
no major update to the core (the few non trivial updates are either
minor fixes or removing an unused feature [scsi_sdb_cache])"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits)
scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences
scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices
scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM"
scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged
scsi: scsi_debug: Implement tur_ms_to_ready parameter
scsi: scsi_debug: Fix request sense
scsi: lpfc: Fix typo in comment for ULP
scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC
scsi: iscsi: Do not put host in iscsi_set_flashnode_param()
scsi: hpsa: Correct ctrl queue depth
scsi: target: tcmu: Make TMR notification optional
scsi: target: tcmu: Implement tmr_notify callback
scsi: target: tcmu: Fix and simplify timeout handling
scsi: target: tcmu: Factor out new helper ring_insert_padding
scsi: target: tcmu: Do not queue aborted commands
scsi: target: tcmu: Use priv pointer in se_cmd
scsi: target: Add tmr_notify backend function
scsi: target: Modify core_tmr_abort_task()
scsi: target: iscsi: Fix inconsistent debug message
scsi: target: iscsi: Fix login error when receiving
...
|
|
For additional robustness in the face of Hyper-V errors or malicious
behavior, validate all values that originate from packets that Hyper-V has
sent to the guest. Ensure that invalid values cannot cause data being
copied out of the bounds of the source buffer when calling memcpy. Ensure
that outgoing packets do not have any leftover guest memory that has not
been zeroed out.
Link: https://lore.kernel.org/r/20200706160928.53049-1-lkmlabelt@gmail.com
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andres Beltran <lkmlabelt@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix typo: "trigerred" --> "triggered"
Link: https://lore.kernel.org/r/20200624135600.14274-1-f.suligoi@asem.it
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
storvsc uses the spinlock of the hv_device's primary channel to
serialize modifications of stor_chns[] performed by storvsc_do_io()
and storvsc_change_target_cpu(), when it could/should use a (per-)
storvsc_device spinlock: this change untangles the synchronization
mechanism for the (storvsc-specific) stor_chns[] array from the
"generic" VMBus code and data structures, clarifying the scope of
this synchronization mechanism.
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20200617164642.37393-8-parri.andrea@gmail.com
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Pull more SCSI updates from James Bottomley:
"This is the set of changes collected since just before the merge
window opened. It's mostly minor fixes in drivers.
The one non-driver set is the three optical disk (sr) changes where
two are error path fixes and one is a helper conversion.
The big driver change is the hpsa compat_alloc_userspace rework by Al
so he can kill the remaining user. This has been tested and acked by
the maintainer"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
scsi: acornscsi: Fix an error handling path in acornscsi_probe()
scsi: storvsc: Remove memset before memory freeing in storvsc_suspend()
scsi: cxlflash: Remove an unnecessary NULL check
scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM
scsi: sr: Fix sr_probe() missing deallocate of device minor
scsi: sr: Fix sr_probe() missing mutex_destroy
scsi: st: Convert convert get_user_pages() --> pin_user_pages()
scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb()
scsi: target: Fix NULL pointer dereference
scsi: target: Initialize LUN in transport_init_se_cmd()
scsi: target: Factor out a new helper, target_cmd_init_cdb()
scsi: hpsa: hpsa_ioctl(): Tidy up a bit
scsi: hpsa: Get rid of compat_alloc_user_space()
scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_struct
scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl()
scsi: ufs: Remove redundant urgent_bkop_lvl initialization
scsi: ufs: Don't update urgent bkops level when toggling auto bkops
scsi: qedf: Remove redundant initialization of variable rc
scsi: mpt3sas: Fix memset() in non-RDPQ mode
scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj
...
|
|
Remove memset with 0 for stor_device->stor_chns in storvsc_suspend() before
the call to kfree() as the memory contains no sensitive information.
Link: https://lore.kernel.org/r/20200605075934.8403-1-efremov@linux.com
Fixes: 56fb10585934 ("scsi: storvsc: Add the support of hibernation")
Suggested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
