summaryrefslogtreecommitdiff
path: root/drivers/scsi/sd_zbc.c
AgeCommit message (Collapse)AuthorFilesLines
2018-11-10scsi: return blk_status_t from scsi_init_io and ->init_commandChristoph Hellwig1-5/+5
Replace the old BLKPREP_* values with the BLK_STS_ ones that they are converted to later anyway. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: Introduce blk_revalidate_disk_zones()Damien Le Moal1-192/+26
Drivers exposing zoned block devices have to initialize and maintain correctness (i.e. revalidate) of the device zone bitmaps attached to the device request queue (seq_zones_bitmap and seq_zones_wlock). To simplify coding this, introduce a generic helper function blk_revalidate_disk_zones() suitable for most (and likely all) cases. This new function always update the seq_zones_bitmap and seq_zones_wlock bitmaps as well as the queue nr_zones field when called for a disk using a request based queue. For a disk using a BIO based queue, only the number of zones is updated since these queues do not have schedulers and so do not need the zone bitmaps. With this change, the zone bitmap initialization code in sd_zbc.c can be replaced with a call to this function in sd_zbc_read_zones(), which is called from the disk revalidate block operation method. A call to blk_revalidate_disk_zones() is also added to the null_blk driver for devices created with the zoned mode enabled. Finally, to ensure that zoned devices created with dm-linear or dm-flakey expose the correct number of zones through sysfs, a call to blk_revalidate_disk_zones() is added to dm_table_set_restrictions(). The zone bitmaps allocated and initialized with blk_revalidate_disk_zones() are freed automatically from __blk_release_queue() using the block internal function blk_queue_free_zone_bitmaps(). Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: add a report_zones methodChristoph Hellwig1-106/+47
Dispatching a report zones command through the request queue is a major pain due to the command reply payload rewriting necessary. Given that blkdev_report_zones() is executing everything synchronously, implement report zones as a block device file operation instead, allowing major simplification of the code in many places. sd, null-blk, dm-linear and dm-flakey being the only block device drivers supporting exposing zoned block devices, these drivers are modified to provide the device side implementation of the report_zones() block device file operation. For device mappers, a new report_zones() target type operation is defined so that the upper block layer calls blkdev_report_zones() can be propagated down to the underlying devices of the dm targets. Implementation for this new operation is added to the dm-linear and dm-flakey targets. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> [Damien] * Changed method block_device argument to gendisk * Various bug fixes and improvements * Added support for null_blk, dm-linear and dm-flakey. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25scsi: sd_zbc: Fix sd_zbc_check_zones() error checksDamien Le Moal1-11/+8
The unsigned 32 bits overflow check for the zone size value is already done within sd_zbc_check_zones() with the test: } else if (logical_to_sectors(sdkp->device, zone_blocks) > UINT_MAX) { so there is no need to check again for an out of range value in sd_zbc_read_zones(). Simplify the code and fix sd_zbc_check_zones() error return to -EFBIG instead of -ENODEV if the zone size is too large. Change the return type of sd_zbc_check_zones() to an int for the error code and return the zone size (zone_blocks) through a u32 pointer to avoid overflowing the signed 32 return value. Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25scsi: sd_zbc: Reduce boot device scan and revalidate timeDamien Le Moal1-54/+40
Handling checks of ZBC device capacity using the max_lba field of the REPORT ZONES command reply for disks with rc_basis == 0 can be done using the same report zones command reply used to check the "same" field. Avoid executing a report zones command solely to check the disk capacity by merging sd_zbc_check_capacity() into sd_zbc_check_zone_size() and renaming that function to sd_zbc_check_zones(). This removes a costly execution of a full report zones command and so reduces device scan duration at boot time as well as the duration of disk revalidate calls. Furthermore, setting the partial report bit in the REPORT ZONES command cdb can significantly reduce this command execution time as the device does not have to count and report the total number of zones that could be reported assuming a large enough reply buffer. A non-partial zone report is necessary only for the first execution of report zones used to check the same field value (to ensure that this value applies to all zones of the disk). All other calls to sd_zbc_report_zones() can use a partial report to reduce execution time. Using a 14 TB ZBC disk, these simple changes reduce device scan time at boot from about 3.5s down to about 900ms. Disk revalidate times are also reduced from about 450ms down to 230ms. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25scsi: sd_zbc: Rearrange codeDamien Le Moal1-20/+19
Move the urswrz check out of sd_zbc_read_zones() and into sd_zbc_read_zoned_characteristics() where that value is obtained (read from the disk zoned characteristics VPD page). Since this function now does more than simply reading the VPD page, rename it to sd_zbc_check_zoned_characteristics(). Also fix the error message displayed when reading that VPD page fails. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-16Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-6/+0
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ...
2018-07-11scsi: sd_zbc: Fix variable type and bogus commentDamien Le Moal1-2/+3
Fix the description of sd_zbc_check_zone_size() to correctly explain that the returned value is a number of device blocks, not bytes. Additionally, the 32 bits "ret" variable used in this function may truncate the 64 bits zone_blocks variable value upon return. To fix this, change "ret" type to s64. Fixes: ccce20fc79 ("sd_zbc: Avoid that resetting a zone fails sporadically") Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: stable@kernel.org Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02scsi: sd_zbc: Remove an assignment from sd_zbc_setup_report_cmnd()Bart Van Assche1-6/+0
Since nr_bytes == blk_rq_bytes(rq) == rq->__data_len, the rq->__data_len = nr_bytes assignment does not modify the value of rq->__data_len. Hence remove that assignment. Note: the code in sd_done() that sets the residual to zero for zone report requests is not affected by this patch. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-14Merge tag 'scsi-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of minor (and safe changes) that didn't make the initial pull request plus some bug fixes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Mask off Scope bits in retry delay scsi: qla2xxx: Fix crash on qla2x00_mailbox_command scsi: aic7xxx: aic79xx: fix potential null pointer dereference on ahd scsi: mpt3sas: Add an I/O barrier scsi: qla2xxx: Fix setting lower transfer speed if GPSC fails scsi: hpsa: disable device during shutdown scsi: sd_zbc: Fix sd_zbc_check_zone_size() error path scsi: aacraid: remove bogus GFP_DMA32 specifies
2018-06-13treewide: kzalloc_node() -> kcalloc_node()Kees Cook1-1/+1
The kzalloc_node() function has a 2-factor argument form, kcalloc_node(). This patch replaces cases of: kzalloc_node(a * b, gfp, node) with: kcalloc_node(a * b, gfp, node) as well as handling cases of: kzalloc_node(a * b * c, gfp, node) with: kzalloc_node(array3_size(a, b, c), gfp, node) as it's slightly less ugly than: kcalloc_node(array_size(a, b), c, gfp, node) This does, however, attempt to ignore constant size factors like: kzalloc_node(4 * 1024, gfp, node) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc_node( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc_node( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc_node( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(char) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc_node + kcalloc_node ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc_node( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc_node( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc_node( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc_node( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc_node(sizeof(THING) * C2, ...) | kzalloc_node(sizeof(TYPE) * C2, ...) | kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node(C1 * C2, ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - (E1) * E2 + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-10Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-10/+0
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc, xfcp, hisi_sas, cxlflash, qla2xxx. In the absence of Nic, we're also taking target updates which are mostly minor except for the tcmu refactor. The only real core change to worry about is the removal of high page bouncing (in sas, storvsc and iscsi). This has been well tested and no problems have shown up so far" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits) scsi: lpfc: update driver version to 12.0.0.4 scsi: lpfc: Fix port initialization failure. scsi: lpfc: Fix 16gb hbas failing cq create. scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc scsi: lpfc: correct oversubscription of nvme io requests for an adapter scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx) scsi: hisi_sas: Mark PHY as in reset for nexus reset scsi: hisi_sas: Fix return value when get_free_slot() failed scsi: hisi_sas: Terminate STP reject quickly for v2 hw scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot scsi: hisi_sas: Try wait commands before before controller reset scsi: hisi_sas: Init disks after controller reset scsi: hisi_sas: Create a scsi_host_template per HW module scsi: hisi_sas: Reset disks when discovered scsi: hisi_sas: Add LED feature for v3 hw scsi: hisi_sas: Change common allocation mode of device id scsi: hisi_sas: change slot index allocation mode scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate() scsi: hisi_sas: fix a typo in hisi_sas_task_prep() ...
2018-06-06scsi: sd_zbc: Fix sd_zbc_check_zone_size() error pathDamien Le Moal1-1/+1
If a drive with variable zone sizes or an invalid last zone size is detected, the local variable this_zone_blocks is set to 0 and early return from the function triggered, but this does not result in an error return. The local variable zone_blocks must be set to 0 for an error to be returned. [mkp: typo in commit description] Fixes: ccce20fc7968 ("scsi: sd_zbc: Avoid that resetting a zone fails sporadically") Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-19scsi: sd_zbc: Avoid that resetting a zone fails sporadicallyBart Van Assche1-58/+82
Since SCSI scanning occurs asynchronously, since sd_revalidate_disk() is called from sd_probe_async() and since sd_revalidate_disk() calls sd_zbc_read_zones() it can happen that sd_zbc_read_zones() is called concurrently with blkdev_report_zones() and/or blkdev_reset_zones(). That can cause these functions to fail with -EIO because sd_zbc_read_zones() e.g. sets q->nr_zones to zero before restoring it to the actual value, even if no drive characteristics have changed. Avoid that this can happen by making the following changes: - Protect the code that updates zone information with blk_queue_enter() and blk_queue_exit(). - Modify sd_zbc_setup_seq_zones_bitmap() and sd_zbc_setup() such that these functions do not modify struct scsi_disk before all zone information has been obtained. Note: since commit 055f6e18e08f ("block: Make q_usage_counter also track legacy requests"; kernel v4.15) the request queue freezing mechanism also affects legacy request queues. Fixes: 89d947561077 ("sd: Implement support for ZBC devices") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: stable@vger.kernel.org # v4.16 Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-19scsi: sd_zbc: Let the SCSI core handle ILLEGAL REQUEST / ASC 0x21Bart Van Assche1-10/+0
scsi_io_completion() translates the sense key ILLEGAL REQUEST / ASC 0x21 into ACTION_FAIL. That means that setting cmd->allowed to zero in sd_zbc_complete() for this sense code / ASC combination is not necessary. Hence remove the code that resets cmd->allowed from sd_zbc_complete(). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-04Merge branch 'fixes' into miscJames Bottomley1-20/+15
Somewhat nasty merge due to conflicts between "33b28357dd00 scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan" and "2b5b96473efc scsi: qla2xxx: Fix FC-NVMe LUN discovery" Merge is non-trivial and has been verified by Qlogic (Cavium) Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
2018-03-07scsi: sd_zbc: Fix potential memory leakDamien Le Moal1-20/+15
Rework sd_zbc_check_zone_size() to avoid a memory leak due to an early return if sd_zbc_report_zones() fails. Reported-by: David.butterfield <david.butterfield@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: stable@vger.kernel.org Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-02scsi: sd_zbc: Fix sd_zbc_get_seq_zones() kernel-doc headerBart Van Assche1-1/+2
Avoid that the kernel-doc tool complains about a mismatch between the kernel-doc header and the function argument list. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-09scsi: sd: Remove zone write lockingDamien Le Moal1-83/+0
The block layer now handles zone write locking. [mkp: removed SCMD_ZONE_WRITE_LOCK reference in scsi_debugfs] Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-09scsi: sd_zbc: Initialize device request queue zoned dataDamien Le Moal1-8/+144
Initialize the seq_zones_bitmap, seq_zones_wlock and nr_zones fields of the disk request queue on disk revalidate. As the seq_zones_bitmap and seq_zones_wlock allocations are identical, introduce the helper sd_zbc_alloc_zone_bitmap(). Using this helper, reallocate the bitmaps whenever the disk capacity (number of zones) changes. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-17scsi: sd_zbc: Fix sd_zbc_read_zoned_characteristics()Damien Le Moal1-3/+3
The three values starting at byte 8 of the Zoned Block Device Characteristics VPD page B6h are 32 bits values, not 64bits. So use get_unaligned_be32() to retrieve the values and not get_unaligned_be64() Fixes: 89d947561077 ("sd: Implement support for ZBC devices") Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-17scsi: sd_zbc: Use well defined macrosDamien Le Moal1-8/+4
Instead of open coding, use the min() macro to calculate a report zones reply buffer length in sd_zbc_check_zone_size() and the round_up() macro for calculating the number of zones in sd_zbc_setup(). No functional change is introduced by this patch. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-17scsi: sd_zbc: Rearrange codeDamien Le Moal1-5/+5
Rearrange sd_zbc_setup() to include use_16_for_rw and use_10_for_rw assignments and move the calculation of sdkp->zone_shift together with the assignment of the verified zone_blocks value in sd_zbc_check_zone_size(). No functional change is introduced by this patch. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-17scsi: sd_zbc: Fix comments and indentationDamien Le Moal1-17/+100
Fix comments style (use kernel-doc style) and content to clarify some functions. Also fix some functions signature indentation and remove a useless blank line in sd_zbc_read_zones(). No functional change is introduced by this patch. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-17scsi: sd_zbc: Move ZBC declarations to scsi_proto.hDamien Le Moal1-24/+0
Move standard macro definitions for the zone types and zone conditions to scsi_proto.h together with the definitions related to the REPORT ZONES command. While at it, define all values in the enums to be clear. Also remove unnecessary includes in sd_zbc.c. No functional change is introduced by this patch. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-17scsi: sd_zbc: Write unlock zone from sd_uninit_cmnd()Damien Le Moal1-4/+5
Releasing a zone write lock only when the write commnand that acquired the lock completes can cause deadlocks due to potential command reordering if the lock owning request is requeued and not executed. This problem exists only with the scsi-mq path as, unlike the legacy path, requests are moved out of the dispatch queue before being prepared and so before locking a zone for a write command. Since sd_uninit_cmnd() is now always called when a request is requeued, call sd_zbc_write_unlock_zone() from that function for write requests that acquired a zone lock instead of from sd_done(). Acquisition of a zone lock by a write command is indicated using the new command flag SCMD_ZONE_WRITE_LOCK. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-04Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-37/+21
Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (hisi_sas, ufs, fnic, cxlflash, be2iscsi, ipr, stex). There's also the usual amount of cosmetic and spelling stuff" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (155 commits) scsi: qla4xxx: fix spelling mistake: "Tempalate" -> "Template" scsi: stex: make S6flag static scsi: mac_esp: fix to pass correct device identity to free_irq() scsi: aacraid: pci_alloc_consistent() failures on ARM64 scsi: ufs: make ufshcd_get_lists_status() register operation obvious scsi: ufs: use MASK_EE_STATUS scsi: mac_esp: Replace bogus memory barrier with spinlock scsi: fcoe: make fcoe_e_d_tov and fcoe_r_a_tov static scsi: sd_zbc: Do not write lock zones for reset scsi: sd_zbc: Remove superfluous assignments scsi: sd: sd_zbc: Rename sd_zbc_setup_write_cmnd scsi: Improve scsi_get_sense_info_fld scsi: sd: Cleanup sd_done sense data handling scsi: sd: Improve sd_completed_bytes scsi: sd: Fix function descriptions scsi: mpt3sas: remove redundant wmb scsi: mpt: Move scsi_remove_host() out of mptscsih_remove_host() scsi: sg: reset 'res_in_use' after unlinking reserved array scsi: mvumi: remove code handling zero scsi_sg_count(scmd) case scsi: fusion: fix spelling mistake: "Persistancy" -> "Persistency" ...
2017-04-25scsi: sd_zbc: Do not write lock zones for resetDamien Le Moal1-26/+16
Resetting a zone write pointer is equivalent to discarding sectors: after a reset, the zone sectors will contain zeros (or the format pattern). So there is no need for mutual exclusion between a zone reset and write. Similarly to discard, make it the responsability of the user to properly synchronize between reset and write (as is done now for discard and write). Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-25scsi: sd_zbc: Remove superfluous assignmentsBart Van Assche1-3/+1
A value is assigned to the variable 'capacity' in sd_zbc_read_zones() but that value is never used. Hence remove the variable 'capacity'. [Damien: There is no need to initialize to 0 the variable 'ret' in sd_zbc_read_zones()] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-25scsi: sd: sd_zbc: Rename sd_zbc_setup_write_cmndDamien Le Moal1-8/+4
Rename sd_zbc_setup_write_cmnd() to sd_zbc_write_lock_zone() to be clear about what the function actually does. To be consistent, also rename sd_zbc_cancel_write_cmnd() to sd_zbc_write_unlock_zone(). No functional change is introduced by this patch. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-08sd: implement REQ_OP_WRITE_ZEROESChristoph Hellwig1-0/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-14sd_zbc: Force use of READ16/WRITE16Damien Le Moal1-0/+4
Normally, sd_read_capacity sets sdp->use_16_for_rw to 1 based on the disk capacity so that READ16/WRITE16 are used for large drives. However, for a zoned disk with RC_BASIS set to 0, the capacity reported through READ_CAPACITY may be very small, leading to use_16_for_rw not being set and READ10/WRITE10 commands being used, even after the actual zoned disk capacity is corrected in sd_zbc_read_zones. This causes LBA offset overflow for accesses beyond 2TB. As the ZBC standard makes it mandatory for ZBC drives to support the READ16/WRITE16 commands anyway, make sure that use_16_for_rw is set. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> eviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-28block: split out request-only flags into a new namespaceChristoph Hellwig1-1/+1
A lot of the REQ_* flags are only used on struct requests, and only of use to the block layer and a few drivers that dig into struct request internals. This patch adds a new req_flags_t rq_flags field to struct request for them, and thus dramatically shrinks the number of common requests. It also removes the unfortunate situation where we have to fit the fields from the same enum into 32 bits for struct bio and 64 bits for struct request. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-25sd: fix uninitialized variable access in error handlingArnd Bergmann1-1/+3
If sd_zbc_report_zones fails, the check for 'zone_blocks == 0' later in the function accesses uninitialized data: drivers/scsi/sd_zbc.c: In function ‘sd_zbc_read_zones’: drivers/scsi/sd_zbc.c:520:7: error: ‘zone_blocks’ may be used uninitialized in this function [-Werror=maybe-uninitialized] This sets it to zero, which has the desired effect of leaving the sd_zbc_read_zones successfully with sdkp->zone_blocks = 0. Fixes: 89d947561077 ("sd: Implement support for ZBC devices") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-19sd: Implement support for ZBC devicesHannes Reinecke1-0/+642
Implement ZBC support functions to setup zoned disks, both host-managed and host-aware models. Only zoned disks that satisfy the following conditions are supported: 1) All zones are the same size, with the exception of an eventual last smaller runt zone. 2) For host-managed disks, reads are unrestricted (reads are not failed due to zone or write pointer alignement constraints). Zoned disks that do not satisfy these 2 conditions are setup with a capacity of 0 to prevent their use. The function sd_zbc_read_zones, called from sd_revalidate_disk, checks that the device satisfies the above two constraints. This function may also change the disk capacity previously set by sd_read_capacity for devices reporting only the capacity of conventional zones at the beginning of the LBA range (i.e. devices reporting rc_basis set to 0). The capacity message output was moved out of sd_read_capacity into a new function sd_print_capacity to include this eventual capacity change by sd_zbc_read_zones. This new function also includes a call to sd_zbc_print_zones to display the number of zones and zone size of the device. Signed-off-by: Hannes Reinecke <hare@suse.de> [Damien: * Removed zone cache support * Removed mapping of discard to reset write pointer command * Modified sd_zbc_read_zones to include checks that the device satisfies the kernel constraints * Implemeted REPORT ZONES setup and post-processing based on code from Shaun Tancheff <shaun.tancheff@seagate.com> * Removed confusing use of 512B sector units in functions interface] Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 11:55:35 +0300