summaryrefslogtreecommitdiff
path: root/drivers/scsi/scsi_lib.c
AgeCommit message (Collapse)AuthorFilesLines
2009-02-22[SCSI] fix ABORTED_COMMAND looping forever problemJames Bottomley1-3/+2
Instead of terminating after five retries, commands terminated by ABORTED_COMMAND sense are retrying forever. The problem was introduced by: commit b60af5b0adf0da24c673598c8d3fb4d4189a15ce Author: Alan Stern <stern@rowland.harvard.edu> Date: Mon Nov 3 15:56:47 2008 -0500 [SCSI] simplify scsi_io_completion() Which introduced an error whereby ABORTED_COMMAND now gets erroneously retried in scsi_io_completion. Fix this by returning the behaviour back to the default no retry. Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com> Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-08[SCSI] scsi_lib: fix DID_RESET status problemsJames Bottomley1-16/+27
Andrew Vaszquez said: > There's a problem that is causing commands returned by the LLD with > a DID_RESET status to be reissued with cleared cmd->sdb data which > in our tests are manifesting in firmware detected overruns. Here's > a snippet of a READ_10 scsi_cmnd upon completion by the storage The problem is caused by: commit b60af5b0adf0da24c673598c8d3fb4d4189a15ce Author: Alan Stern <stern@rowland.harvard.edu> Date: Mon Nov 3 15:56:47 2008 -0500 [SCSI] simplify scsi_io_completion() Because scsi_release_buffers() is called before commands that go through the ACTION_RETRY and ACTION_DELAYED_RETRY legs are requeued. However, they're not re-prepared, so nothing ever reallocates the buffer resources to them. Fix this by releasing the buffers only if we're not going to go down these legs (but scsi_release_buffers() on all legs including two in scsi_end_request(); this latter needs a special version __scsi_release_buffers() because the final one can be called after the request has been freed, so the bidi test in scsi_release_buffers(), which touches the request has to be skipped). Reported-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-05[SCSI] Fix error handling for DIF/DIXMartin K. Petersen1-1/+8
patch commit b60af5b0adf0da24c673598c8d3fb4d4189a15ce Author: Alan Stern <stern@rowland.harvard.edu> Date: Mon Nov 3 15:56:47 2008 -0500 [SCSI] simplify scsi_io_completion() broke DIX error handling. Also, we are now using EILSEQ to indicate integrity errors to the upper layers (as opposed to regular EIO failures). This allows filesystems to inspect buffers and decide whether to retry the I/O. Update scsi_io_completion() accordingly. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-05[SCSI] scsi_lib: don't decrement busy counters when inserting commandsJames Bottomley1-22/+39
A bug was introduced by commit b60af5b0adf0da24c673598c8d3fb4d4189a15ce Author: Alan Stern <stern@rowland.harvard.edu> Date: Mon Nov 3 15:56:47 2008 -0500 [SCSI] simplify scsi_io_completion() because the simplification uses scsi_queue_insert(). The problem with this function is that it expects to be called from the completion path while the command is still outstanding, so it decrements the device and host busy counts to do the requeue. The problem is that scsi_io_completion() is a path executed well after these counts have *already* been decremented, leading to a double decrement if the command goes down any error path leading to ACTION_DELAYED_RETRY. The fix is to allow a private function __scsi_queue_insert() with a flag to say whether the busy counters should be decremented. This is made static to scsi_lib.c to discourage other use. Reported-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-02[SCSI] Fix uninitialized variable error in scsi_io_completionAlan Stern1-1/+5
This patch (as1191) adds a missing "default" case in scsi_io_completion(), thereby fixing an "uninitialized variable" error. It also adds a missing newline to a log entry. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] add residual argument to scsi_execute and scsi_execute_reqFUJITA Tomonori1-6/+11
scsi_execute() and scsi_execute_req() discard the residual length information. Some callers need it. This adds residual argument (optional) to scsi_execute and scsi_execute_req. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] simplify scsi_io_completion()Alan Stern1-59/+77
This patch (as1142b) consolidates a lot of repetitious code in scsi_io_completion(). It also fixes a few comments. Most importantly, however, it clearly distinguishes among the three sorts of retries that can be done when a command fails to complete: Unprepare the request and resubmit it, so that a new command will be created for it. Requeue the request directly so that it will be retried immediately using the same command. Requeue the request so that it will be retried following a short delay. Complete the remainder of the request with an I/O error. [jejb: Updates 1. For several error conditions, we would now print the sense twice in slightly different ways, so unify the location of sense printing. 2. I added more descriptions to actual failure conditions for better debugging 3. according to spec, ABORTED_COMMAND is supposed to be retried (except on DIF failure). Our old behaviour of erroring it looks to be a bug. 4. I'd prefer not to default initialise the action variable because that ensures that every leg of the error handler has an associated action and the compiler will warn if someone later accidentally misses one or removes one. ] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-13[SCSI] scsi_lib: only call scsi_unprep_request() under queue lockJames Bottomley1-1/+1
It's called under that lock everywhere else and it does alter the request state, so it should be. This one occurance in scsi_requeue_command() could open a window where req->special is set to NULL while the requests is going through either timeout or completion processing leading to NULL pointer derefs of the sort complained of in bugzillas 12020 and 12195. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-16[SCSI] Fix hang in starved list processingMike Christie1-12/+11
Close possible infinite loop with interrupts off when devices are added back to the starved list. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=11898 Reported-by: <alex.shi@intel.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] export busy state via q->lld_busy_fn()Kiyoshi Ueda1-0/+32
This patch implements q->lld_busy_fn() for scsi mid layer to export its busy state for request stacking drivers. For efficiency, no lock is taken to check the busy state of shost/starget/sdev, since the returned value is not guaranteed and may be changed after request stacking drivers call the function, regardless of taking lock or not. When scsi can't dispatch I/Os anymore and needs to kill I/Os (e.g. !sdev), scsi needs to return 'not busy'. Otherwise, request stacking drivers may hold requests forever. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] refactor sdev/starget/shost busy checkingKiyoshi Ueda1-10/+20
This patch refactors the busy checking codes of scsi_device, Scsi_Host and scsi_target. There should be no functional change. This is a preparation for another patch which exports scsi's busy state to the block layer for request stacking drivers. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] fix removable device inability to detect disk changesJames Bottomley1-11/+10
On Tue, 12 Aug 2008 15:08:14 +0200 Giuliano Pochini <pochini@shiny.it> wrote: > Fujitsu magneto-optical drive, Adaptec 29160 and > Linux Jay 2.6.26 #7 SMP Sun Aug 10 18:34:22 CEST 2008 ppc 7455, altivec supported PowerMac3,6 GNU/Linux > > When I insert a disk and I mount it, scsi_test_unit_ready() is called and > the do-while loop gets sshdr->sense_key == UNIT_ATTENTION in the first > cycle and 0 in the second one. So the if below misses the UNIT_ATTENTION > and sdev->changed = 1 is not executed. At this point bad things can > happen... I'm not sure how to fix this. Any clue ? The problem is essentially caused by us eating UNIT_ATTENTION conditions in scsi_test_unit_ready(). Fix by updating the ->changed flag when this happens if the media is removable. [pochini@shiny.it: updates to tidy up patch] Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] modify scsi to handle new fail fast flags.Mike Christie1-1/+1
This checks the errors the scsi-ml determined were retryable and returns if we should fast fail it based on the request fail fast flags. Without the patch, drivers like lpfc, qla2xxx and fcoe would return DID_ERROR for what it determines is a temporary communication problem. There is no loss of connectivity at that time and the driver thinks that it would be fast to retry at the driver level. SCSI-ml will however sees fast fail on the request and DID_ERROR and will fast fail the io. This will then cause dm-multipath to fail the path and possibley switch target controllers when we should be retrying at the scsi layer. We also were fast failing device errors to dm multiapth when unless the scsi_dh modules think otherwis we want to retry at the scsi layer because multipath can only retry the IO like scsi should have done. multipath is a little dumber though because it does not what the error was for and assumes that it should fail the paths. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] Add helper code so transport classes/driver can control queueing (v3)Mike Christie1-16/+88
SCSI-ml manages the queueing limits for the device and host, but does not do so at the target level. However something something similar can come in userful when a driver is transitioning a transport object to the the blocked state, becuase at that time we do not want to queue io and we do not want the queuecommand to be called again. The patch adds code similar to the exisiting SCSI_ML_*BUSY handlers. You can now return SCSI_MLQUEUE_TARGET_BUSY when we hit a transport level queueing issue like the hw cannot allocate some resource at the iscsi session/connection level, or the target has temporarily closed or shrunk the queueing window, or if we are transitioning to the blocked state. bnx2i, when they rework their firmware according to netdev developers requests, will also need to be able to limit queueing at this level. bnx2i will hook into libiscsi, but will allocate a scsi host per netdevice/hba, so unlike pure software iscsi/iser which is allocating a host per session, it cannot set the scsi_host->can_queue and return SCSI_MLQUEUE_HOST_BUSY to reflect queueing limits on the transport. The iscsi class/driver can also set a scsi_target->can_queue value which reflects the max commands the driver/class can support. For iscsi this reflects the number of commands we can support for each session due to session/connection hw limits, driver limits, and to also reflect the session/targets's queueing window. Changes: v1 - initial patch. v2 - Fix scsi_run_queue handling of multiple blocked targets. Previously we would break from the main loop if a device was added back on the starved list. We now run over the list and check if any target is blocked. v3 - Rediff for scsi-misc. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds1-9/+30
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (37 commits) [SCSI] zfcp: fix double dbf id usage [SCSI] zfcp: wait on SCSI work to be finished before proceeding with init dev [SCSI] zfcp: fix erp list usage without using locks [SCSI] zfcp: prevent fc_remote_port_delete calls for unregistered rport [SCSI] zfcp: fix deadlock caused by shared work queue tasks [SCSI] zfcp: put threshold data in hba trace [SCSI] zfcp: Simplify zfcp data structures [SCSI] zfcp: Simplify get_adapter_by_busid [SCSI] zfcp: remove all typedefs and replace them with standards [SCSI] zfcp: attach and release SAN nameserver port on demand [SCSI] zfcp: remove unused references, declarations and flags [SCSI] zfcp: Update message with input from review [SCSI] zfcp: add queue_full sysfs attribute [SCSI] scsi_dh: suppress comparison warning [SCSI] scsi_dh: add Dell product information into rdac device handler [SCSI] qla2xxx: remove the unused SCSI_QLOGIC_FC_FIRMWARE option [SCSI] qla2xxx: fix printk format warnings [SCSI] qla2xxx: Update version number to 8.02.01-k8. [SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing. [SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling. ...
2008-10-09block: unify request timeout handlingJens Axboe1-4/+13
Right now SCSI and others do their own command timeout handling. Move those bits to the block layer. Instead of having a timer per command, we try to be a bit more clever and simply have one per-queue. This avoids the overhead of having to tear down and setup a timer for each command, so it will result in a lot less timer fiddling. Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-03[SCSI] Update the SCSI state model to allow blocking in the created stateJames Bottomley1-9/+30
Brian King <brking@linux.vnet.ibm.com> reported that fibre channel devices can oops during scanning if their ports block (because the device goes from CREATED -> BLOCK -> RUNNING rather than CREATED -> BLOCK -> CREATED). Fix this by adding a new state: CREATED_BLOCK which can only transition back to CREATED and disallow the CREATED -> BLOCK transition. Now both the created and blocked states that the mid-layer recognises can include CREATED_BLOCK. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-09-23[SCSI] Fix hang with split requestsJames Bottomley1-1/+2
Sometimes, particularly for USB devices with the last sector bug, requests get completed in chunks. There's a bug in this in that if one of the chunks gets an error, we complete that chunk with an error but never move on to the remaining ones, leading to the request hanging (because it's not fully completed). Fix this by completing all remaining chunks if an error is encountered. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-27[SCSI] replace __FUNCTION__ with __func__Harvey Harrison1-3/+3
[jejb: fixed up a ton of missed conversions. All of you are on notice this has happened, driver trees will now need to be rebased] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: SCSI List <linux-scsi@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] scsi_lib: use blk_rq_tagged in scsi_request_fnMike Christie1-1/+1
I goofed and did not see the macro for checking if a request is tagged. This patch has us use blk_rq_tagged instead of digging into the req->tag. Patch was made over scsi-misc. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] Do not retry a request whose data integrity check failedMartin K. Petersen1-2/+7
If initiator or target reject the I/O due to DIF errors there is no point in retrying. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] Support devices with protection informationMartin K. Petersen1-1/+24
Implement support for DMA of protection information for devices that are data integrity capable. - Add support for mapping an extra scatter-gather list containing the protection information. - Allocate protection scsi_data_buffer if host is DIX (integrity DMA) capable. - Accessor function for checking whether a device has protection enabled. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] fix shared tag map tag allocationMike Christie1-0/+15
When drivers use a shared tag map we can end up with more requests than tags, because the tag map is shost->can_queue tags and there can be sdevs * sdev->queue_depth requests. In scsi_request_fn if tag allocation fails we just drop down to just dequeueing the tag without a tag. The problem is that drivers using the shared tag map rely on a valid tag always being set, because it will use the tag number to lookup commands later. This patch has us check if we got a valid tag when the host lock is held right before we check if the host queue is ready. We do the check here because to allocate the tag we need the q lock, but if the tag is bad we want to add the device/q onto the starved list which requires the host lock. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds1-14/+21
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (102 commits) [SCSI] scsi_dh: fix kconfig related build errors [SCSI] sym53c8xx: Fix bogus sym_que_entry re-implementation of container_of [SCSI] scsi_cmnd.h: remove double inclusion of linux/blkdev.h [SCSI] make struct scsi_{host,target}_type static [SCSI] fix locking in host use of blk_plug_device() [SCSI] zfcp: Cleanup external header file [SCSI] zfcp: Cleanup code in zfcp_erp.c [SCSI] zfcp: zfcp_fsf cleanup. [SCSI] zfcp: consolidate sysfs things into one file. [SCSI] zfcp: Cleanup of code in zfcp_aux.c [SCSI] zfcp: Cleanup of code in zfcp_scsi.c [SCSI] zfcp: Move status accessors from zfcp to SCSI include file. [SCSI] zfcp: Small QDIO cleanups [SCSI] zfcp: Adapter reopen for large number of unsolicited status [SCSI] zfcp: Fix error checking for ELS ADISC requests [SCSI] zfcp: wait until adapter is finished with ERP during auto-port [SCSI] ibmvfc: IBM Power Virtual Fibre Channel Adapter Client Driver [SCSI] sg: Add target reset support [SCSI] lib: Add support for the T10 (SCSI) Data Integrity Field CRC [SCSI] sd: Move scsi_disk() accessor function to sd.h ...
2008-07-12[SCSI] fix locking in host use of blk_plug_device()James Bottomley1-1/+0
scsi_lib.c:scsi_host_queue_ready() plugs the device with incorrect locking. It should actually have the queue lock held, but it's holding the host lock. Fix this by eliminating the call. The host ready has no need to plug the queue because if it returns 0 in scsi_request_function control transfers to not_ready which acquires the queue lock and plugs the device if its at zero depth. Reported-by: Elias Oltmanns <eo@nebensachen.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12[SCSI] Rename scsi_bidi_sdb_cacheMartin K. Petersen1-13/+13
The data integrity changes need to dynamically allocate scsi_data_buffers too. Rename scsi_bidi_sdb_cache for clarity. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-06[SCSI] erase invalid data returned by deviceAlan Stern1-0/+9
This patch (as1108) fixes a problem that can occur with certain USB mass-storage devices: They return invalid data together with a residue indicating that the data should be ignored. Rather than leave the invalid data in a transfer buffer, where it can get misinterpreted, the patch clears the invalid portion of the buffer. This solves a problem (wrong write-protect setting detected) reported by Maciej Rutecki and Peter Teoh. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Peter Teoh <htmldeveloper@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-06-05[SCSI] scsi_dh: add infrastructure for SCSI Device HandlersChandra Seetharaman1-0/+8
Some of the storage devices (that can be accessed through multiple paths), do need some special handling for 1. Activating the passive path of the storage access. 2. Decode and handle the special sense codes returned by the devices. 3. Handle the I/Os being sent to the passive path, especially during the device probe time. when accessed through multiple paths. As of today this special device handling is done at the dm-multipath layer using dm-handlers. That works well for (1); for (2) to be handled at dm layer, scsi sense information need to be exported from SCSI to dm-layer, which is not very attractive; (3) cannot be done at all at the dm layer. Device handler has been moved to SCSI mainly to handle (2) and (3) properly. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds1-3/+4
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: [SCSI] aic94xx: fix section mismatch [SCSI] u14-34f: Fix 32bit only problem [SCSI] dpt_i2o: sysfs code [SCSI] dpt_i2o: 64 bit support [SCSI] dpt_i2o: move from virt_to_bus/bus_to_virt to dma_alloc_coherent [SCSI] dpt_i2o: use standard __init / __exit code [SCSI] megaraid_sas: fix suspend/resume sections [SCSI] aacraid: Add Power Management support [SCSI] aacraid: Fix jbod operations scan issues [SCSI] aacraid: Fix warning about macro side-effects [SCSI] add support for variable length extended commands [SCSI] Let scsi_cmnd->cmnd use request->cmd buffer [SCSI] bsg: add large command support [SCSI] aacraid: Fix down_interruptible() to check the return value correctly [SCSI] megaraid_sas; Update the Version and Changelog [SCSI] ibmvscsi: Handle non SCSI error status [SCSI] bug fix for free list handling [SCSI] ipr: Rename ipr's state scsi host attribute to prevent collisions [SCSI] megaraid_mbox: fix Dell CERC firmware problem
2008-05-02[SCSI] add support for variable length extended commandsBoaz Harrosh1-1/+1
Add support for variable-length, extended, and vendor specific CDBs to scsi-ml. It is now possible for initiators and ULD's to issue these types of commands. LLDs need not change much. All they need is to raise the .max_cmd_len to the longest command they support (see iscsi patch). - clean-up some code paths that did not expect commands to be larger than 16, and change cmd_len members' type to short as char is not enough. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-02[SCSI] Let scsi_cmnd->cmnd use request->cmd bufferBoaz Harrosh1-2/+3
- struct scsi_cmnd had a 16 bytes command buffer of its own. This is an unnecessary duplication and copy of request's cmd. It is probably left overs from the time that scsi_cmnd could function without a request attached. So clean that up. - Once above is done, few places, apart from scsi-ml, needed adjustments due to changing the data type of scsi_cmnd->cmnd. - Lots of drivers still use MAX_COMMAND_SIZE. So I have left that #define but equate it to BLK_MAX_CDB. The way I see it and is reflected in the patch below is. MAX_COMMAND_SIZE - means: The longest fixed-length (*) SCSI CDB as per the SCSI standard and is not related to the implementation. BLK_MAX_CDB. - The allocated space at the request level - I have audit all ISA drivers and made sure none use ->cmnd in a DMA Operation. Same audit was done by Andi Kleen. (*)fixed-length here means commands that their size can be determined by their opcode and the CDB does not carry a length specifier, (unlike the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly true and the SCSI standard also defines extended commands and vendor specific commands that can be bigger than 16 bytes. The kernel will support these using the same infrastructure used for VARLEN CDB's. So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml supports without specifying a cmd_len by ULD's Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-29block: make queue flags non-atomicNick Piggin1-13/+18
We can save some atomic ops in the IO path, if we clearly define the rules of how to modify the queue flags. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-07[SCSI] fix barrier failure issueJames Bottomley1-6/+4
Currently, if the barrier command fails, the error return isn't seen by the block layer and it proceeds on regardless. The problem is that SCSI always returns no error for REQ_TYPE_BLOCK_PC ... it expects the submitter to pick the errors out of req->errors, which the block barrier functions don't do. Since it appears that the way SG_IO and scsi_execute_request() work they discard the block error return and always use req->errors, the best fix for this is to have the SCSI layer return an error to block if one actually occurred (this also allows us to filter out spurious errors, like deferred sense). This patch is a bug fix that will need backporting to stable, but it's also quite a big change and in need of testing, so we'll incubate in the main kernel tree and backport at the -rc2 or so stage if no problems turn up. Acked-by: Jens Axboe <jens.axboe@oracle.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] make scsi_end_bidi_request() staticAdrian Bunk1-1/+1
This patch makes the needlessly global scsi_end_bidi_request() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-19[SCSI] fix media change events for polled devicesKay Sievers1-0/+5
Commit: a341cd0f (SCSI: add asynchronous event notification API) breaks: 285e9670 (sr,sd: send media state change modification events) by introducing an event filter, which is removed here, to make events, we are depending on, happen again. Fix this by removing the event filter. It's pretty much broken at the moment, since a user can't set it (the attribute being read only). A proper fix will be to make the event discriminator distinguish between AN and Polled media change events. Cc: David Zeuthen <david@fubar.dk> Cc: kristen accardi <kaccardi@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-19block: add request->raw_data_lenTejun Heo1-4/+4
With padding and draining moved into it, block layer now may extend requests as directed by queue parameters, so now a request has two sizes - the original request size and the extended size which matches the size of area pointed to by bios and later by sgs. The latter size is what lower layers are primarily interested in when allocating, filling up DMA tables and setting up the controller. Both padding and draining extend the data area to accomodate controller characteristics. As any controller which speaks SCSI can handle underflows, feeding larger data area is safe. So, this patch makes the primary data length field, request->data_len, indicate the size of full data area and add a separate length field, request->raw_data_len, for the unmodified request size. The latter is used to report to higher layer (userland) and where the original request size should be fed to the controller or device. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-08[SCSI] fix BUG when sum(scatterlist) > bufflenTony Battersby1-1/+0
When sending a SCSI command to a tape drive via the SCSI Generic (sg) driver, if the command has a data transfer length more than scatter_elem_sz (32 KB default) and not a multiple of 512, then I either hit BUG_ON(!valid_dma_direction(direction)) in dma_unmap_sg() or else the command never completes (depending on the LLDD). When constructing scatterlists, the sg driver rounds up the scatterlist element sizes to be a multiple of 512. This can result in sum(scatterlist lengths) > bufflen. In this case, scsi_req_map_sg() incorrectly sets bio->bi_size to sum(scatterlist lengths) rather than to bufflen. When the command completes, req_bio_endio() detects that bio->bi_size != 0, and so it doesn't call bio_endio(). This causes the command to be resubmitted, resulting in BUG_ON or the command never completing. This patch makes scsi_req_map_sg() set bio->bi_size to bufflen rather than to sum(scatterlist lengths), which fixes the problem. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-05iommu sg merging: call dma_set_seg_boundary in __scsi_alloc_queue()FUJITA Tomonori1-0/+1
This is a one-line patch to add the following to __scsi_alloc_queue(): dma_set_seg_boundary(dev, shost->dma_boundary); This is the simplest approach but the result looks odd, __scsi_alloc_queue() does: blk_queue_segment_boundary(q, shost->dma_boundary); dma_set_seg_boundary(dev, shost->dma_boundary); blk_queue_max_segment_size(q, dma_get_max_seg_size(dev)); I think that it would be better to set up segment boundary in the same way as we did for the maximum segment size. That is, removing shost->dma_boundary and LLDs call pci_set_dma_seg_boundary (or its friends). Then __scsi_alloc_queue() can set up both limits in the same way: blk_queue_segment_boundary(q, dma_get_seg_boundary(dev)); blk_queue_max_segment_size(q, dma_get_max_seg_size(dev)); killing dma_boundary in scsi_host_template needs a large patch for libata (dma_boundary is used by only libata and sym53c8xx). I'll send a patch to do that if it is acceptable. James and Jeff? Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Greg KH <greg@kroah.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05iommu sg merging: call blk_queue_segment_boundary in __scsi_alloc_queueFUJITA Tomonori1-0/+3
request_queue and device struct must have the same value of a segment size limit. This patch adds blk_queue_segment_boundary in __scsi_alloc_queue so LLDs don't need to call both blk_queue_segment_boundary and set_dma_max_seg_size. A LLD can change the default value (64KB) can call device_dma_parameters accessors like pci_set_dma_max_seg_size when allocating scsi_host. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-30[SCSI] handle scsi_init_queue failure properlyFUJITA Tomonori1-1/+17
scsi_init_queue is expected to clean up allocated things when it fails. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30[SCSI] destroy scsi_bidi_sdb_cache in scsi_exit_queueFUJITA Tomonori1-0/+1
Needs to call kmem_cache_destroy for scsi_bidi_sdb_cache in scsi_exit_queue. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30[SCSI] remove use_sg_chainingJames Bottomley1-56/+18
With the sg table code, every SCSI driver is now either chain capable or broken (or has sg_tablesize set so chaining is never activated), so there's no need to have a check in the host template. Also tidy up the code by moving the scatterlist size defines into the SCSI includes and permit the last entry of the scatterlist pools not to be a power of two. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30[SCSI] bidirectional: fix up for the new blk_end_request codeKiyoshi Ueda1-2/+10
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30[SCSI] bidirectional command supportBoaz Harrosh1-15/+91
At the block level bidi request uses req->next_rq pointer for a second bidi_read request. At Scsi-midlayer a second scsi_data_buffer structure is used for the bidi_read part. This bidi scsi_data_buffer is put on request->next_rq->special. Struct scsi_cmnd is not changed. - Define scsi_bidi_cmnd() to return true if it is a bidi request and a second sgtable was allocated. - Define scsi_in()/scsi_out() to return the in or out scsi_data_buffer from this command This API is to isolate users from the mechanics of bidi. - Define scsi_end_bidi_request() to do what scsi_end_request() does but for a bidi request. This is necessary because bidi commands are a bit tricky here. (See comments in body) - scsi_release_buffers() will also release the bidi_read scsi_data_buffer - scsi_io_completion() on bidi commands will now call scsi_end_bidi_request() and return. - The previous work done in scsi_init_io() is now done in a new scsi_init_sgtable() (which is 99% identical to old scsi_init_io()) The new scsi_init_io() will call the above twice if needed also for the bidi_read command. Only at this point is a command bidi. - In scsi_error.c at scsi_eh_prep/restore_cmnd() make sure bidi-lld is not confused by a get-sense command that looks like bidi. This is done by puting NULL at request->next_rq, and restoring. [jejb: update to sg_table and resolve conflicts also update to blk-end-request and resolve conflicts] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30[SCSI] implement scsi_data_bufferBoaz Harrosh1-38/+25
In preparation for bidi we abstract all IO members of scsi_cmnd, that will need to duplicate, into a substructure. - Group all IO members of scsi_cmnd into a scsi_data_buffer structure. - Adjust accessors to new members. - scsi_{alloc,free}_sgtable receive a scsi_data_buffer instead of scsi_cmnd. And work on it. - Adjust scsi_init_io() and scsi_release_buffers() for above change. - Fix other parts of scsi_lib/scsi.c to members migration. Use accessors where appropriate. - fix Documentation about scsi_cmnd in scsi_host.h - scsi_error.c * Changed needed members of struct scsi_eh_save. * Careful considerations in scsi_eh_prep/restore_cmnd. - sd.c and sr.c * sd and sr would adjust IO size to align on device's block size so code needs to change once we move to scsi_data_buff implementation. * Convert code to use scsi_for_each_sg * Use data accessors where appropriate. - tgt: convert libsrp to use scsi_data_buffer - isd200: This driver still bangs on scsi_cmnd IO members, so need changing [jejb: rebased on top of sg_table patches fixed up conflicts and used the synergy to eliminate use_sg and sg_count] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30[SCSI] tgt: use scsi_init_io instead of scsi_alloc_sgtableBoaz Harrosh1-11/+9
If we export scsi_init_io()/scsi_release_buffers() instead of scsi_{alloc,free}_sgtable() from scsi_lib than tgt code is much more insulated from scsi_lib changes. As a bonus it will also gain bidi capability when it comes. [jejb: rebase on to sg_table and fix up rejections] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-29Merge branch 'blk-end-request' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds1-20/+11
* 'blk-end-request' of git://git.kernel.dk/linux-2.6-block: (30 commits) blk_end_request: changing xsysace (take 4) blk_end_request: changing ub (take 4) blk_end_request: cleanup of request completion (take 4) blk_end_request: cleanup 'uptodate' related code (take 4) blk_end_request: remove/unexport end_that_request_* (take 4) blk_end_request: changing scsi (take 4) blk_end_request: add bidi completion interface (take 4) blk_end_request: changing ide-cd (take 4) blk_end_request: add callback feature (take 4) blk_end_request: changing ide normal caller (take 4) blk_end_request: changing cpqarray (take 4) blk_end_request: changing cciss (take 4) blk_end_request: changing ide-scsi (take 4) blk_end_request: changing s390 (take 4) blk_end_request: changing mmc (take 4) blk_end_request: changing i2o_block (take 4) blk_end_request: changing viocd (take 4) blk_end_request: changing xen-blkfront (take 4) blk_end_request: changing viodasd (take 4) blk_end_request: changing sx8 (take 4) ...
2008-01-28SG: work with the SCSI fixed maximum allocations.James Bottomley1-3/+5
SCSI sg table allocation has a maximum size (of SCSI_MAX_SG_SEGMENTS, currently 128) and this will cause a BUG_ON() in SCSI if something tries an allocation over it. This patch adds a size limit to the chaining allocator to allow the specification of the maximum allocation size for chaining, so we always chain in units of the maximum SCSI allocation size. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28blk_end_request: changing scsi (take 4)Kiyoshi Ueda1-20/+11
This patch converts scsi mid-layer to use blk_end_request interfaces. Related 'uptodate' arguments are converted to 'error'. As a result, the interface of internal function, scsi_end_request(), is changed. Cc: James Bottomley <James.Bottomley@SteelEye.com> Cc: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28SG: Convert SCSI to use scatterlist helpers for sg chainingJens Axboe1-118/+20
Also change scsi_alloc_sgtable() to just return 0/failure, since it maps to the command passed in. ->request_buffer is now no longer needed, once drivers are adapted to use scsi_sglist() it can be killed. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>