summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx
AgeCommit message (Collapse)AuthorFilesLines
2009-12-04[SCSI] qla2xxx: Update version number to 8.03.01-k7Giridhar Malavali1-1/+1
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] qla2xxx: Properly handle UNDERRUN completion statuses.Lalit Chandivade1-63/+57
Correct issues where the lower scsi-status would be improperly cleared, instead, allow the midlayer to process the status after the proper residual-count checks are performed. Finally, validate firmware status flags prior to assigning values from the FCP_RSP frame. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Michael Hernandez <michael.hernandez@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] qla2xxx: Properly re-register FC4/FDMI after physical and logical ↵Andrew Vasquez3-6/+8
link disruptions. Original code would not register FC4 nor FDMI information after a logical tear-down of an VFC link. Code now triggers registration date during processing of a 'Report ID Acquisition IOCB', which is submitted after a FLOGI or FDISC completes. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] qla2xxx: Properly check FCP_RSP response-info field after TMF completion.Andrew Vasquez1-4/+22
Original code discarded response-info field information and assumed the command completed successfully without verifying the target's status within the FCP_RSP packet. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] qla2xxx: Retrieve firmware's maximum number of supported FCFs.Andrew Vasquez3-6/+11
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] qla2xxx: Set the size of the host buffer used to fetch DCBX and XGMAC ↵Giridhar Malavali1-2/+2
parameters to 4K. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] qla2xxx: Reread firmware versions information after an ISP abort.Lalit Chandivade1-0/+9
In some case, the MPI and PHY versions when retrieved after the Execute-FW mailbox-command are incorrect (255.255.255.255). Instead, query the information after the check for firmware ready is done in the abort ISP path. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] qla2xxx: Display additional mailbox registers during AEN handling.Andrew Vasquez1-9/+15
The mailbox register values may assist in debugging efforts. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] qla2xxx: Add firmware-dump kobject uevent notification.Andrew Vasquez4-55/+64
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02[SCSI] qla2xxx: Fix NULL ptr deref bug in fail path during queue createAnirban Chakraborty1-2/+4
Current code attempts to clean up resources when queue create fails and there it invokes queue free call with a (NULL) pointer to the queue which could not be allocated in the first place. Fix it by returning directly without invoking the queue free call as no resources has been allocated at that point of time. Reported-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] qla2xxx: Update version number to 8.03.01-k6.Giridhar Malavali1-1/+1
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] qla2xxx: Properly delete rports attached to a vport.Andrew Vasquez2-7/+11
Original code would inadvertently skip the deferred fc_remote_port_delete() call for rports hanging off any vport. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] qla2xxx: Correct various NPIV issues.Andrew Vasquez5-29/+32
* Consolidate vport-count processing. * Correct vp_idx restrictions during RSCN processing. * Push topology verification check to qla2x00_do_dpc_all_vps(). * Don't skip vport full-login-lip/lip-reset mailbox handling. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] qla2xxx: Correct qla2x00_eh_wait_on_command() to wait correctly.Lalit Chandivade1-4/+1
Original code would break-out of loop after only one iteration. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] qla2xxx: Further limit device-table (qla_devtbl) lookup to non-24xx.Andrew Vasquez1-1/+2
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] qla2xxx: Correctly set FCF_TAPE_PRESENT flag based on scsi-device.Santosh Vernekar4-3/+7
In fabric-login based on iop BIT_8 firmware notifies presence of a FCP2 device and not necessarily a TAPE device. So instead of setting FCF_TAPE_PRESENT flag there we set it using scsi_device->type after mid-layer scan recognises "type" of the device. It also adds a new flag FCF_FCP2_DEVICE for any future use. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] qla2xxx: Add asynchronous-login support.Andrew Vasquez7-9/+784
ISPs which support this feature include 23xx and above. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] qla2xxx: Generalize srb structure usage.Andrew Vasquez3-2/+14
Lay groundwork for adding alternative asynchronous operations by generalize and extending the SRB structure. This allows for follow-on patches to add support for: - Asynchronous logins. - ELS/CT passthru requests. - Loopback requests. - Non-blocking mailbox commands (ABTS, Task Management, etc). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-23[SCSI] qla2xxx: Update version number to 8.03.01-k5Giridhar Malavali1-1/+1
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-23[SCSI] qla2xxx: Fix to ensure driver works in sinlge queue mode if ↵Anirban Chakraborty6-12/+27
multiqueue fails When the multiqueue mode fails to work, the driver falls back on single queue mode. This ensures that the firmware is reinitialized with single queue options and all the resources are readjusted accordingly. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-23[SCSI] qla2xxx: Correct display of vp_count in debug printk.Andrew Vasquez1-1/+2
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-23[SCSI] qla2xxx: Fix a bug that clears the interrupt status register for the ↵Anirban Chakraborty1-2/+4
base queue The interrupt handler clears the interrupt status register for response updates in the base queue while working in the multique mode. This could lead to missing interrupt for async events, mail box completions etc. as these are also handled in the base queue. The fix ensures that the interrupt bit is not cleared for response updates in the ISR when the driver is working in multiqueue mode. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-23[SCSI] qla2xxx: ISP21xx/22xx do not support FDMI registrations.Andrew Vasquez1-0/+4
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-23[SCSI] qla2xxx: Pad IOCB structure for size requirements.Shyam Sundar1-1/+1
One byte added to make the IOCB structure satisfy size requirements. Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-23[SCSI] qla2xxx: Handle RSCN's per master/slave vn-port basis.Santosh Vernekar1-1/+1
Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-23[SCSI] qla2xxx: Process DPC requests within valid Fabric topologies.Lalit Chandivade1-0/+3
If vports are created and topology is changed to Loop only, the driver continuously gets a LIP reset occurred and keeps trying to enable the vport. Only manage requests during F_Port. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-23[SCSI] qla2xxx: Mark all devices lost on loss of fc port.Santosh Vernekar1-0/+1
Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-23[SCSI] qla2xxx: Skip RSCN processing on vha if event is global.Santosh Vernekar1-4/+20
The RSCN processing is skipped if the event received is global and vha is not recipient. Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-23[SCSI] qla2xxx: Correctly handle 'global port-unavailable' AEN.Andrew Vasquez1-1/+29
Treat a global port-unavailable PORT_UPDATE (8014h) AEN as a loop-down event. For this case, within the FCoE domain, the 'logical' interface has been terminated, but the driver will not receive the classic LOOP_DOWN AEN. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-23[SCSI] qla2xxx: Pass the command's data residual to upper-layer callers.Ravi Anand1-0/+1
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-23[SCSI] qla2xxx: Fix __LITTLE_ENDIAN definition warningsDave Jones1-1/+1
On ppc64, gcc 4.4 spews lots of.. drivers/scsi/qla2xxx/qla_def.h:1485:7: warning: "__LITTLE_ENDIAN" is not defined Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan1-1/+0
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-21qla2xxx: Update version number to 8.03.01-k4.Andrew Vasquez1-1/+1
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21qla2xxx: Correct (again) overflow during dump-processing on large-memory ↵Andrew Vasquez1-1/+1
ISP23xx parts. Commit 7b867cf76fbcc8d77867cbec6f509f71dce8a98f ([SCSI] qla2xxx: Refactor qla data structures) inadvertently reverted e792121ec85672c1fa48f79d13986a3f4f56c590 ([SCSI] qla2xxx: Correct overflow during dump-processing on large-memory ISP23xx parts.). Cc: stable@kernel.org Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21qla2xxx: Limit querying to supported mailbox-registers while reading FW state.Andrew Vasquez1-5/+10
Pre-ISP24xx chips have dedicated uses for mailbox 4 and 5 which software should typically not query nor update. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21qla2xxx: Correct iiDMA-update calling conventions.Harish Zunjarrao2-7/+8
* To set iiDMA speeds for ISP81XX, bits 5-0 are used whereas for other older ISPs bits 2-0 are used. * Pass proper VP index Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21qla2xxx: Fixed a bug in number of response queue creation logic.Anirban Chakraborty1-1/+1
Cc: stable@kernel.org Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-15[SCSI] qla2xxx: Resolve a performance issue in interruptAnirban Chakraborty1-6/+9
Reverted back a change in qla*_intr_handler code that caused an increase in cpu cycles by allowing interrupts to occur while the instance hardware lock was being held. Fix by taking the lock in irqsave mode. Reported-and-tested-by: Douglas W. Styner <douglas.w.styner@intel.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-15[SCSI] qla2xxx: fix printk format warningsRandy Dunlap1-2/+5
Fix qla2xxx printk format warnings: drivers/scsi/qla2xxx/qla_sup.c:915: warning: long long unsigned int format, u64 arg (arg 5) drivers/scsi/qla2xxx/qla_sup.c:915: warning: long long unsigned int format, u64 arg (arg 6) drivers/scsi/qla2xxx/qla_sup.c:923: warning: long long unsigned int format, u64 arg (arg 5) drivers/scsi/qla2xxx/qla_sup.c:923: warning: long long unsigned int format, u64 arg (arg 6) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Update version number to 8.03.01-k3.Andrew Vasquez1-1/+1
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Synchronize MPI settings after a PE Reset.Andrew Vasquez3-0/+121
Ensure MPS remains in synchronization across all NIC/FCoE functions after a reset. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Export additional firmware-states for application support.Andrew Vasquez3-4/+25
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Reduce lock-contention during do-work processing.Andrew Vasquez2-23/+24
Queued work processing will now be serialized with its own lower-priority spinlock. This also simplifies the work-queue interface for future work-queue consumers. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Avoid explicit LOGO during driver host tear-down.Andrew Vasquez1-1/+2
As firmware will ultimately terminate (stop) and port states-cleared. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Query supported RISC registers bits in determining a ↵Andrew Vasquez2-5/+2
paused-state. ISP24xx and above must query the host-status register, not HCCR. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Avoid redundant RISC reset during (re)-initialization.Andrew Vasquez1-3/+0
ISP24xx and above ISPs perform a RISC reset in qla24xx_reset_chip(), which is called prior to qla24xx_chip_diag(). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Fallback enode-mac should not be a multicast address.Andrew Vasquez1-1/+1
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Add notification message when an NPIV fails to acquire a ↵Andrew Vasquez1-1/+4
port-id. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Add 10Gb iiDMA support.Andrew Vasquez2-2/+11
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Mark a port's state as needing-rediscovery during link ↵Andrew Vasquez1-1/+3
disruptions. With RSCN states not being kept across qla2x00_configure_loop() invocations, loop-resync distruptions during fabric-discovery may cause ports to remain in a lost state. Force state renegotiation during a follow-on configure-loop iteration. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 20:59:11 +0300