summaryrefslogtreecommitdiff
path: root/drivers/scsi/lpfc/lpfc_ct.c
AgeCommit message (Collapse)AuthorFilesLines
2011-02-18[SCSI] lpfc 8.3.21: FC Discovery changesJames Smart1-0/+49
FC Discovery changes - Treat received PLOGI while logged in as a relogin (unregister and reregister). - Added a timer to delay Nport discovery when clean bit is cleared and Fabric portname/nodename/FCID is changed. - Invalidate Port's DID when receiving PLOGI from p2p port with CONFIG_PORT mailbox command. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] lpfc 8.3.19: Add SLI4 FC Discovery supportJames Smart1-22/+26
Add SLI4 FC Discovery support - Replace READ_LA and READ_LA64 with READ_TOPOLOGY mailbox command. - Converted the old READ_LA structure to use bf_set/get instead of bit fields. - Rename HBA_FCOE_SUPPORT flag to HBA_FCOE_MODE. Flag now indicates function is running as SLI-4 FC or FCoE port. Make sure flag reset each time READ_REV completed as it can dynamically change. - Removed BDE union in the READ_TOPOLOGY mailbox command and added a define to define the ALPA MAP SIZE. Added FC Code for async events. - Added code to support new 16G link speed. - Define new set of values to keep track of valid user settable link speeds. - Used new link speed definitions to define link speed max and bitmap. - Redefined FDMI Port sppeds to be hax values and added the 16G value. - Added new CQE trailer code for FC Events. - Add lpfc_issue_init_vfi and lpfc_init_vfi_cmpl routines. - Replace many calls to the initial_flogi routine with lpfc_issue_init_vfi. - Add vp and vpi fields to the INIT_VFI mailbox command. - Addapt lpfc_hba_init_link routine for SLI4 use. - Use lpfc_hba_init_link call from lpfc_sli4_hba_setup. - Add a check for FC mode to register the FCFI before init link. - Convert lpfc_sli4_init_vpi to be called without a vpi (get it from vport). Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-09[SCSI] lpfc 8.3.8: (BSG1) Update BSG infrastructureJames Smart1-3/+5
Update BSG infrastructure to handle new vendor specific BSG commands. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-09[SCSI] lpfc: unify two if branches with the same code in ↵Roel Kluin1-6/+1
lpfc_decode_firmware_rev() Regardless of the flag state, the branches execute the same code Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] lpfc 8.3.5: fix sysfs parameters, vport creation and other bugs and ↵James Smart1-5/+14
update logging This patch include the following fixes and changes: - Fix crash when "error" is echoed to board_mode sysfs parameter - Fix FCoE Parameter parsing in regions 23 - Fix driver crash when creating vport with large number of targets on SLI4 - Fix bug with npiv message being logged when it is not supported by the adapter - Fix a potential dereferencing mailbox structure after free bug - Fix firmware crash after vport create with high target count - Error out requests to set board_mode to warm restart via sysfs on SLI4 HBAs - Fix Block guard logging - Fix a memory corruption issue during GID_FT IO prep - Fix crash while processing unsolicited FC frames - Fix failed to allocate XRI message is not a critical failure - Update and fix formatting in some log messages - Fix missing new line characters in log messages - Removed the use of the locally defined FC transport layer related macros - Check the rsplen in lpfc_handle_fcp_err function before using rsplen Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] lpfc 8.3.5: fix VPI registration, error clean up and add support for ↵James Smart1-1/+33
vlink events This patch includes the following fixes and new features: - Fix mask size for CT field in WQE - Fix VPI base not used when unregistering VPI on port 1. - Fix UNREG_VPI mailbox command to unreg the correct VPI - Fixed Check for aborted els command - Fix error when trying to load driver with wrong firmware on FCoE HBA. - Fix bug with probe_one routines not putting the Scsi_Host back upon error - Add support for Clear Virtual Link Async Events - Add support for unsolicited CT exchange sequence abort - Add 0x0714 OCeXXXXX PCI ID Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-21trivial: remove unnecessary semicolonsJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-23[SCSI] lpfc 8.3.4: Add bsg (SGIOv4) support for ELS/CT supportJames Smart1-0/+2
Add bsg (SGIOv4) support for sending and receiving ELS, CT commands This patch adds a new file, lpfc_bsg.c. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-06-15[SCSI] lpfc 8.3.3 : Fix various SLI-3 vs SLI-4 differencesJames Smart1-1/+3
Contains the following changes - Set the CT field of FDISC to 3 - Fixed over allocation of SCSI buffers on SLI4 - Removed unused jump table entries - Increase LPFC_WQE_DEF_COUNT to 256 - Updated FDISC context to VPI - Fixed immediate SCSI command for LUN reset translation to WQE - Extended mailbox handling to allow MBX_POLL commands in between async MBQ commands - Fixed SID used for FDISC - Fix crash when accessing ctlregs from sysfs for SLI4 HBAs - Fix SLI4 firmware version not being saved or displayed correctly - Expand CQID field in WQE structure to 16 bits - Fix post header template mailbox command timing out - Removed FCoE PCI device ID 0x0705 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] lpfc 8.3.2 : Miscellaneous ChangesJames Smart1-2/+5
Miscellaneous Changes: - Convert from SLI2_ACTIVE flag to more correct SLI_ACTIVE (generic) flag - Reposition log verbose messaging definitions - Update naming for vpi object name from vport slang name - Handle deferred error attention condition - Add 10G link support - Small bug fixup Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] lpfc 8.3.2 : Update of copyrightsJames Smart1-1/+1
Update of copyrights on modified files Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] lpfc 8.3.2 : Addition of SLI4 Interface - Base SupportJames Smart1-0/+2
Adds new hardware and interface definitions. Adds new interface routines - utilizing the reorganized layout of the driver. Adds SLI-4 specific functions for attachment, initialization, teardown, etc. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] lpfc 8.3.2 : Reorganization for SLI4James Smart1-3/+1
Preps the organization of the driver so that the bottom half, which interacts with the hardware, can share common code sequences for attachment, detachment, initialization, teardown, etc with new hardware. For very common code sections, which become specific to the interface type, the driver uses an indirect function call. The function is set at initialization. For less common sections, such as initialization, the driver looks at the interface type and calls the routines relative to the interface. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] lpfc 8.3.0 : Fix multiple NPIV issuesJames Smart1-3/+14
- Fix lock up on rmmod with vports defined by having lpfc_pci_remove_one() invoke fc_vport_terminate() to remove all the vports before invoking fc_remove_host() for the physical port - Fix echotest failure when NPIV is enabled - Add the vport_disable function to the physical port's transport template to make the vport disable attribute visible - Set the vport state to DISABLE on create if the disable flag is true - Call lpfc_alloc_sysfs_attr() for vports so that statistical data collection works on them - Support setting a vport's symbolic name via sysfs by writing to /sys/class/fc_vport/vportX/symbolic_name - Fix create vport fails when link is down or in loop mode. Should be able to be create vports any time NPIV is enabled - Fix slow vport deletes when deleting multiple vports at once Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc ↵James Smart1-0/+1
vendor events Added support for new sysfs attributes: lpfc_stat_data_ctrl and lpfc_max_scsicmpl_time. The attributes control statistical reporting of io load. Added support for new fc vendor events for error reporting. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 : Miscellaneous Bug FixesJames Smart1-8/+7
Miscellaneous Fixes: - Fix the wrong variable name used for checking node active usage status - Fix numerous duplicate log message numbers - Fix change KERN_WARNING messages to KERN_INFO. - Stop sending erroneous LOGO to fabric after vport is already terminated - Fix HBQ allocates that were kalloc'ing w/ GFP_KERNEL while holding a lock. - Fix gcc 4.3.2 compiler warnings and a sparse warning - Fix bugs in handling unsolicited ct event queue - Reorder some of the initial link up checks, to remove odd VPI states. - Correct poor VPI handling - Add debug messages - Expand Update_CFG mailbox definition - Fix handling of VPD data offsets - Reorder loopback flags - convert to use offsetof() Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 : Update driver for new SLI-3 featuresJames Smart1-2/+2
Update driver for new SLI-3 features: - interrupt enhancements - lose adapter doorbell writes - inlining support for FCP_Ixx cmds Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12[SCSI] lpfc 8.2.7 : Miscellaneous FixesJames Smart1-3/+3
Miscellaneous Fixes: - Fix bug in mbox sysfs interface that locked in EAGAIN if discovery stalled. - Fix missing error message when npiv and loop are true when link up occurs. - Fix panic in lpfc_scsi_cmd_iocb_cmpl: scsi_buf was NULL, but created race conditions with other code paths. - Fix error in sysfs mailbox structure that didn't rezero on next use. - Add missing mempool_free() to attachment failure path - Fix missing put of ndlp structure during driver unload. - Fix applications unable to send mailbox commands during discovery. - Remove unused argument (type) from function lpfc_post_buffer() API - Fix vport name is not shown after hbacmd vportcreate. - Remove repeated code statements. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12[SCSI] lpfc 8.2.7 : Rework the worker threadJames Smart1-9/+7
Rework of the worker thread to make it more efficient. Make a finer-grain notfication of pending work so less time is spent checking conditions. Also made other general cleanups. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-10[SCSI] lpfc 8.2.6 : Miscellaneous FixesJames Smart1-1/+1
Miscellaneous Fixes - Allow WRITE_VPARAM command when the virtual port is in a stopped state - Fixed handling of our queue depth max that was unconditionally raising the depth on all vports, rather than just the vport affected. - Fix race in interrupt handler for mailbox processing that did not take out the host lock. - Removed unused functions: find_node, findnode_rpi, and fabric_abort_flogi - Correct misspelled word unsolicited in message 0146 - Correct HW-error 5 handling - it should not reset the adapter - Correct handling of IOCBs, which did not null out our pCmd field before invoking the midlayer io done function. - Changed our maximum supported target id to 4096 Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-10[SCSI] lpfc 8.2.6 : Multiple discovery fixesJames Smart1-31/+15
Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-12[SCSI] lpfc 8.2.5 : Miscellaneous discovery FixesJames Smart1-1/+1
Miscellaneous discovery fixes: - Flush RSCN buffers on vports when reseting HBA. - Fix incorrect FLOGI after vport reg failed - Fix a potential fabric ELS race condition - Fix handling of failed PLOGI command under high lip rates - Fix FDISC handling - Fix debug logging for npiv handling Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-12[SCSI] lpfc 8.2.5 : Correct ndlp referencing issuesJames Smart1-10/+29
Correct ndlp referencing issues: - Fix ndlp kref issues due to race conditions between threads - Fix cancel els delay retry event which missed an ndlp reference count Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Rework misplaced reference taking on node structureJames Smart1-1/+0
Rework misplaced reference taking on node structure Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Fix Unsolicited Data itemsJames Smart1-58/+34
Fix Drivers Unsolicited CT command handling - we did not handle multiframe sequences well. Fix error due to delay in replenishing buffers for unsolicited data. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Miscellaneous FixesJames Smart1-8/+8
Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Miscellaneous Discovery/ELS FixesJames Smart1-9/+74
Miscellaneous Discovery/ELS Fixes: - Delay free's of ELS requests if adapter reject conditions - Fix concurrent PLOGI vs ADISC state handling - Add retry mechanism for GFF_ID - Correct some illegal state transitions around RSCN timeouts - Fix missing return in FAN handling Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-12[SCSI] lpfc 8.2.3 : Miscellaneous Small Fixes - part 1James Smart1-11/+51
Miscellaneous Small Fixes - part 1 - Fix typo kmzlloc -> kzalloc - Fix discovery ndlp use after free panic - Fix link event causing flood of 0108 messages - Relieve some mbox congestion on link up with 100 vports - Fix broken vport parameters - Prevent lock recursion in logo_reglogin_issue - Split uses of error variable in lpfc_pci_probe_one into retval and error - Remove completion code related to dev_loss_tmo - Remove unused LPFC_MAX_HBQ #define - Don't compare pointers to 0 for sparse - Make 2 functions static for sparse - Fix default rpi cleanup code causing rogue ndlps to remain on the NPR list - Remove annoying ELS messages when driver is unloaded - Fix Cannot issue Register Fabric login problems on link up - Remove LPFC_EVT_DEV_LOSS_DELAY - Fix FC port swap test leads to device going offline - Fix vport CT flags to only be set when accepted - Add code to handle signals during vport_create - Fix too many retries in FC-AL mode - Pull lpfc_port_link_failure out of lpfc_linkdown_port Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-12[SCSI] lpfc 8.2.3 : NPIV bug fixesJames Smart1-12/+64
NPIV bug fixes: - Remove vport params on physical hba when npiv is disabled - Implement new DA_ID CT command to remove vport information from the switch after delete. Some switches didn't clean this up unless the physical link dropped. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-08-01[SCSI] lpfc 8.2.2 : Style cleanupsJames Smart1-2/+2
- Clean up all instances of mixed tab-space indentation - Clean up sparse build errors - Add appropriate static's Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Miscellaneous Bug FixesJames Smart1-0/+19
- Fix vport ndlp ref counting errors - Fix use after free of ndlp structure - Use the correct flag to check for LOADING setting. - Fix driver unload bugs (related to shost references) after link down or rscn - Fix up HBQ initialization - Fix port_list locking around driver unload. - Fix references to hostdata as a phba - Fix GFFID type offset to work correctly with big endian structure. - Only call pci_disable_msi if the pci_enable_msi succeeded - Fix vport_delete wait/fail if in discovery - Put a reference on the nameservers ndlp when performing CT traffic. - Remove unbalanced hba unlock. - Fix up HBQ processing - Fix lpfc debugfs discovery trace output for ELS rsp cmpl - Send ADISC when rpi is 0 - Stop FDISC retrying forever - Unable to retrieve correct config parameter for vport - Fix sli_validate_fcp_iocb, sli_sum_iocb, sli_abort_iocb to be vport-aware. - Fix index-out-of-range error in iocb. Spotted by Coverity. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Rework the lpfc_printf_log() macroJames Smart1-105/+85
Rework the lpfc_printf_log() macro so that logging is enabled on a per-vport basis. Used to be on a physical-port basis, thus logging with large numbers of vports became a mess. Required redefinition of the macro, and an update of every use. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Attribute and Parameter splits for vport and physical portJames Smart1-3/+3
- Split attributes up into vport and non-vport attributes. - Move vport specific cfg params to vport Many of the vport-specific behaviors were still global attributes on the physical port. Move them to the vport itself. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Fix locking around HBA's port_listJames Smart1-5/+7
Cleans up a lot of bad behaviors that have been in this area a while Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Error messages and debugfs updatesJames Smart1-3/+23
Error messages and debugfs updates: - Fix up GID_FT error messages - Enhance debugfs with slow_ring_trace, dumpslim and nodelist information - Add log type (and messages) for vport state changes - Enhance log messages when retries ELS fail Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-18[SCSI] lpfc: bug fixesJames Smart1-53/+164
Following the NPIV support, the following changes have been accumulated in the testing and qualification of the driver: - Fix affinity of ELS ring to slow/deferred event processing - Fix Ring attention masks - Defer dev_loss_tmo timeout handling to worker thread - Consolidate link down error classification for better error checking - Remove unused/deprecated nlp_initiator_tmr timer - Fix for async scan - move adapter init code back into pci_probe_one context. Fix async scan interfaces. - Expand validation of ability to create vports - Extract VPI resource cnt from firmware - Tuning of Login/Reject policies to better deal with overwhelmned targets - Misc ELS and discovery fixes - Export the npiv_enable attribute to sysfs - Mailbox handling fix - Add debugfs support - A few other small misc fixes: - wrong return values, double-frees, bad locking - Added adapter failure heartbeat Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-18[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3James Smart1-134/+386
NPIV support is added to the driver. It utilizes the interfaces of the fc transport for the creation and deletion of vports. Within the driver, a new Scsi_Host is created for each NPIV instance, and is paired with a new instance of a FC port. This allows N FC Port elements to share a single Adapter. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-18[SCSI] lpfc: NPIV: add SLI-3 interfaceJames Smart1-76/+107
NPIV support is only available via new adapter interface extensions, termed SLI-3. This interface changes some of the basic behaviors such as command and response ring element sizes and data structures, as well as a change in buffer posting. Note: the new firmware extensions are found only on our mid-range and enterprise 4Gig adapters - so NPIV support is available only on these newer adapters. The latest firmware can be downloaded from the Emulex support page. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-18[SCSI] lpfc: NPIV: split portsJames Smart1-120/+105
The driver is reorganized to separate the handling of the adapter from the handling of the FC port. Adapter handling includes submissions of command requests, receiving responses, and managing adapter resources. The FC port includes the discovery engine, login handling, and the mapping of a Scsi_Host on the "port". Although not a large functional change, as it touches core structures and functions, resulting in a large text delta. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Update copyright year to 2007James Smart1-1/+1
Update copyright year to 2007 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Added support for 8G speed and new HBAsJames Smart1-0/+3
Added support for 8G speed and new HBAs. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Collapse discovery lists to a single node listJames Smart1-6/+4
Collapse discovery lists to a single node list. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Round 2 of Miscellaneous fixesJames Smart1-3/+3
Round 2 of Miscellaneous fixes: - Ensure we don't prematurely re-enable IRQs in lpfc_sli_abort_fcp_cmpl(). - Prevent freeing of iocb after IOCB_TIMEDOUT error. - Added code to cleanup REG_LOGIN mailbox command when a LOGO is received. - Fix offline window where more work can sneak in after clearing work_ha - Use target reset instead of LU reset in bus_device_reset_handler - Fixed system hangs due to leaked host_lock. - Fixed NULL pointer dereference during I/O with LIP. - Fixed false iocb timeout. - Fixed name server query response handling. - Change rport dev_loss_tmo value when user change lpfc HBA's dev_loss_tmo. - Fixed a memory leak in lpfc_sli_wake_mbox_wait. - Fixed check for dropped frames. - Removed hba queue depth calculation based on device PCI IDs - Change min cr_count value specified in comment to agree with setting Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Misc bug fixes and code cleanupJames Smart1-2/+3
Misc bug fixes and code cleanup: - Fix system hang while running on systems with IOMMU - Fix use after free issues with rports - Don't free mailbox structure if it's still on the mboxq list - Decrement txq_cnt rather than txcmplq_cnt when parsing the txq list - Use msleep for long delays to prevent soft lockup bug check - Don't remove node during dev_loss_tmo if discovery is active - Fix memory leaks in get/reset statistics and link attention paths - Fixed lpfc_ns_rsp to handle entire GID_FT response. - mbox interface should use MAILBOX_CMD_SIZE rather than sizeof(MAILBOX_t) - Fixed bug check in add_timer. - Fixup messages 0116, 0117, and 0128 to report ELS I/O tag. - Remove unused parameter to lpfc_cleanup. - Change mailbox timeout handling. - Remove unused buflist. Code cleanup. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03[SCSI] lpfc 8.1.11 : Discovery FixesJames Smart1-1/+23
Discovery Fixes: - Prevent starting discovery of a node if discovery is in progress. - Code improvement (reduction) for lpfc_findnode_did(). - Update discovery to send RFF to Fabric on link up - Bypass unique WWN checks for fabric addresses - Add ndlp to plogi list prior to issuing the plogi els command Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-26[SCSI] lpfc: check before dereference in lpfc_ct.cEric Sesterhenn1-1/+2
If we fail to allocate mp->virt during the first while loop iteration, mlist is still uninitialized, therefore we should check if before dereferencing. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02[PATCH] namespaces: utsname: use init_utsname when appropriateSerge E. Hallyn1-4/+4
In some places, particularly drivers and __init code, the init utsns is the appropriate one to use. This patch replaces those with a the init_utsname helper. Changes: Removed several uses of init_utsname(). Hope I picked all the right ones in net/ipv4/ipconfig.c. These are now changed to utsname() (the per-process namespace utsname) in the previous patch (2/7) [akpm@osdl.org: CIFS fix] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Andrey Savochkin <saw@sw.ru> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-05[SCSI] lpfc 8.1.10 : Add support for dev_loss_tmo_callbk and ↵James Smart1-25/+0
fast_io_fail_tmo_callbk Add support for new dev_loss_tmo callback Goodness is that it removes code for a parallel nodev timer that existed in the driver Add support for the new fast_io_fail callback Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06[SCSI] lpfc 8.1.7 : ID String and Message fixesJames Smart1-8/+4
ID String and Message fixes - Fix switch symbolic name registration to match cross-OS values - Replace printk's with more standard lpfc_printf_log calls - Make all lpfc_printf_log message numbers unique Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>