summaryrefslogtreecommitdiff
path: root/drivers/scsi/libfc/fc_fcp.c
AgeCommit message (Collapse)AuthorFilesLines
2013-09-05fcp: Do not interpret check condition as underrunBart Van Assche1-5/+5
This patch avoids that the FCoE initiator sends a REC message after having received a SCSI response with non-zero status and non-zero DATA IN buffer length. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-06-28treewide: relase -> releaseGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-04libfc: fix REC handlingVasu Dev1-3/+3
Currently fc_fcp_timeout doesn't check FC_RP_FLAGS_REC_SUPPORTED flag first, this prevents REC request ever going out at all to the target having REC support. So this patches fixes the fc_fcp_timeout by checking FC_RP_FLAGS_REC_SUPPORTED flag first. The changed order won't cause any issue during clearing FC_RP_FLAGS_REC_SUPPORTED on failed IO with target not supporting FC_RP_FLAGS_REC_SUPPORTED, since retry on failed IO would succeed. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-10-07[SCSI] libfc: fix lun reset failure bugs in fc_fcp_resp handling of FCP_RSP_INFOYi Zou1-1/+2
In LUN RESET testing involving NetApp targets, it is observed that LUN RESET is failing. The fc_fcp_resp() is not completing the completion for the LUN RESET task since fc_fcp_resp assumes that the FCP_RSP_INFO is 8 bytes with the 4 byte reserved field, where in case of NetApp targets the FCP_RSP to LUN RESET only has 4 bytes of FCP_RSP_INFO. This leads fc_fcp_resp to error out w/o completing the task completion, eventually causing LUN RESET to be escalated to host reset, which is not very nice. Per FCP-3 r04, clause 9.5.15 and Table 23, the FCP_RSP_INFO field can be either 4 bytes or 8 bytes, with the last 4 bytes as "Reserved (if any)". Therefore it is valid to have 4 bytes FCP_RSP_INFO like some of the NetApp targets behave. Fixing this by validating the FCP_RSP_INFO against both the two spec allowed length. Reported-by: Frank Zhang <frank_1.zhang@intel.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libfc: fix sending REC after FCP_RESP is receivedYi Zou1-3/+3
This is exposed in the case the FCP_DATA frames somehow got lost and fc_fcp got the FCP_RSP, in fc_fcp_recv_resp(), since xfer_len is less than the expected_len it resets the the timer to wait to 2 more jiffies in case the data frames are already queued locally. However, for target does not support REC, it would just send RJT w/ ELS_RJT_UNSUP. The rec response handler thus only clears the rport flag for not doing REC later, but does not do fcp_io_complete() on the associated fsp. The fix is just check status of FCP_RSP being received already, i.e. using the FC_SRB_RCV_STATUS flag, in fc_fcp_timeout before start sending REC. We should have waited long enough if there is truely data frames queued locally. Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libfc: adds FCP failures statsVasu Dev1-0/+8
Adds stats to track FCP pkt and frame alloc failure. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Acked-by : Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libfc, fcoe, bnx2fc: cleanup fcoe_dev_statsVasu Dev1-4/+4
The libfc is used by fcoe but fcoe agnostic, and therefore should not have any fcoe references. So renaming fcoe_dev_stats from libfc as its for fc_stats. After that libfc is fcoe string free except some strings for Open-FCoE.org. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Acked-by : Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-22Merge branch 'for-next' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "This contains the usual set of updates and bugfixes to target-core + existing fabric module code, along with a handful of the patches destined for v3.3 stable. It also contains the necessary target-core infrastructure pieces required to run using tcm_qla2xxx.ko WWPNs with the new Qlogic Fibre Channel fabric module currently queued in target-pending/for-next-merge, and coming for round 2. The highlights for this series include: - Add target_submit_tmr() helper function for fabric task management (andy) - Convert tcm_fc to use target_submit_tmr() (andy) - Replace target core various cmd flags with a transport state (hch) - Convert loopback to use workqueue submission (hch) - Convert target core to use array_zalloc for tpg_lun_list (joern) - Convert target core to use array_zalloc for device_list (joern) - Add target core support for TMR_ABORT_TASK (nab) - Add target core se_sess->sess_kref + get/put helpers (nab) - Add target core se_node_acl->acl_kref for ->acl_free_comp usage (nab) - Convert iscsi-target to use target_put_session + sess_kref (nab) - Fix tcm_fc fc_exch memory leak in ft_send_resp_status (nab) - Fix ib_srpt srpt_handle_cmd send_ioctx->ioctx_kref leak on exception (nab) - Fix target core up handling of short INQUIRY buffers (roland) - Untangle target-core front-end and back-end meanings of max_sectors attribute (roland) - Set loopback residual field for SCSI commands (roland) - Fix target-core 16-bit target ports for SET TARGET PORT GROUPS emulation (roland) Thanks again to Andy, Christoph, Joern, Roland, and everyone who has contributed this round!" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (64 commits) ib_srpt: Fix srpt_handle_cmd send_ioctx->ioctx_kref leak on exception loopback: Fix transport_generic_allocate_tasks error handling iscsi-target: remove improper externs iscsi-target: Remove unused variables in iscsi_target_parameters.c target: remove obvious warnings target: Use array_zalloc for device_list target: Use array_zalloc for tpg_lun_list target: Fix sense code for unsupported SERVICE ACTION IN target: Remove hack to make READ CAPACITY(10) lie if thin provisioning is enabled target: Bump core version to v4.1.0-rc2-ml + fabric versions tcm_fc: Fix fc_exch memory leak in ft_send_resp_status target: Drop unused legacy target_core_fabric_ops API callers iscsi-target: Convert to use target_put_session + sess_kref target: Convert se_node_acl->acl_group removal to use ->acl_kref target: Add se_node_acl->acl_kref for ->acl_free_comp usage target: Add se_node_acl->acl_free_comp for NodeACL release path target: Add se_sess->sess_kref + get/put helpers target: Convert session_lock to irqsave target: Fix typo in drivers/target iscsi-target: Fix dynamic -> explict NodeACL pointer reference ...
2012-03-20scsi: remove the second argument of k[un]map_atomic()Cong Wang1-4/+4
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-02-26scsi: Use struct scsi_lun in fc/fcp.hAndy Grover1-3/+2
This allows us to use scsilun_to_int without an ugly cast. Fix up places that use scsilun_to_int on fcp->fc_lun accordingly. In fc target, this leaves ft_cmd.lun unused, so remove it. Signed-off-by: Andy Grover <agrover@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Kiran Patil <kiran.patil@intel.com> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-16[SCSI] libfc: remove redundant timer init for fcpYi Zou1-3/+1
The fcp timer is already initialized when it gets allocated. Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds1-2/+0
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits) [SCSI] qla4xxx: export address/port of connection (fix udev disk names) [SCSI] ipr: Fix BUG on adapter dump timeout [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer [SCSI] hpsa: change confusing message to be more clear [SCSI] iscsi class: fix vlan configuration [SCSI] qla4xxx: fix data alignment and use nl helpers [SCSI] iscsi class: fix link local mispelling [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA [SCSI] aacraid: use lower snprintf() limit [SCSI] lpfc 8.3.27: Change driver version to 8.3.27 [SCSI] lpfc 8.3.27: T10 additions for SLI4 [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes [SCSI] megaraid_sas: Changelog and version update [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts ...
2011-10-02[SCSI] libfc: cache align struct fc_fcp_pkt fieldsVasu Dev1-2/+0
Re-arrange its fields to avoid padding and have better cacheline alignments. Removed not used start_time, end_time and last_pkt_time fields. This all reduced this struct size to 448 from 480 and that also reduced one cacheline on x86_64 beside eliminating 8 pads. However kept logical fields together. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-29[SCSI] libfc: block SCSI eh thread for blocked rportsVasu Dev1-2/+9
Call fc_block_scsi_eh() in all fcoe eh to blocks the scsi_eh thread for blocked rports. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Reviewed-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-28[SCSI] libfc: Remove the reference to FCP packet from scsi_cmnd in case of errorNeerav Parikh1-0/+1
fc_queuecommand() allocates an FCP packet for each SCSI command and sends it out on the wire. In the process it stores the reference to the FCP packet in the scsi_cmnd structure. Now, in case under stress testing the libfc exchange layer runs out of exchanges the fc_queuecommand() may not be able to send out commands out on the wire. In such a scenario if there is an error in sending the FCP packet out the wire; fc_queuecommand() deletes the FCP packet from internal queue, releases the FCP packet and returns a SCSI_MLQUEUE_HOST_BUSY status to the scsi-ml. But, the reference to the FCP packet set in the scsi_cmnd is not removed from the scsi_cmnd in this code path. This might lead to a crash under stress testing where the scsi_cmnd failed by fc_queuecommand() comes up to fc_eh_abort() via scsi eh thread. fc_eh_abort() will get reference to the FCP packet to be aborted from the scsi_cmnd for further FCP abort related processing and then try to release the FCP packet that has already been released. This patch removes the FCP packet reference from the scsi_cmnd before returning back from fc_queuecommand() in case of an error in sending out the FCP packet. Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-28[SCSI] libfc: cleanup sending SRR requestHillf Danton1-2/+0
The variable on stack, namely cdb_op, is not used but removed. [ Patch reworked by Robert Love due to invalid patch format ] Signed-off-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-28[SCSI] libfc: two minor changes in commentsHillf Danton1-2/+2
One change is to cleanup typo in comment for fc_fcp_recv(), another corrects the misleading comment for fc_fcp_abts_resp(). [ Patch reworked by Robert Love due to invalid patch format ] Signed-off-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-28[SCSI] libfc: use FC_MAX_ERROR_CNTHillf Danton1-1/+1
Though defined, FC_MAX_ERROR_CNT is not used. It is used now for CRC error in the path of receiving FCP frame. Signed-off-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-05-24[SCSI] libfc: do not immediately retry the cmd when seq_send fails in ↵Yi Zou1-2/+1
fc_fcp_send_data Currently, when seq_send() fails in fc_fcp_send_data(), fc_fcp_retry_cmd() would complete this failed I/O directly and let scsi-ml retry. However, target side is not notified which may hang the target. Instead, we should just bail out from from fc_fcp_send_data and let scsi-ml times it out and aborts this I/O instead. Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24[SCSI] libfc: fix race in SRR responseVasu Dev1-7/+4
In this case fsp was freed before error handler was invoked, this is fixed by having SRR fsp reference freed by exch destructor so that fsp will be always held until it exch is freed. Also don't reset fsp->recov_seq since this is needed by SRR error handler to do exch done. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24[SCSI] libfc: release DDP context if frame_send() failsYi Zou1-1/+1
In case frame_send() fails, make sure to let the underlying HW release the DDP context that has already been set up before calling frame_send(). Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-01[SCSI] libfc: rec tov value and REC_TOV_CONST units usages is incorrectVasu Dev1-23/+9
Added REC_TOV_CONST intent was to have rec tov as e_d_tov + 1s but currently it is e_d_tov + 1ms since e_d_tov is stored in ms unit. Also returned rec tov by get_fsp_rec_tov is in ms and this ms tov is used as-is with fc_fcp_timer_set expecting jiffies tov. Fixed this by having get_fsp_rec_tov return rec tov in jiffies as e_d_tov + 1s and then use jiffies tov w/ fc_fcp_timer_set. Also some cleanup, no need to cache get_fsp_rec_tov return value in local rec_tov at various places. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-01[SCSI] libfc: Move host_lock usage into ramp_up/down routinesRobert Love1-10/+15
The host_lock is still used to protect the can_queue value in the Scsi_Host, but it doesn't need to be held and released by each caller. This patch moves the lock usage into the fc_fcp_can_queue_ramp_up and fc_fcp_can_queue_ramp_down routines. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-31Fix common misspellingsLucas De Marchi1-2/+2
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-02-12[SCSI] libfc: Remove usage of the Scsi_Host's host_lockRobert Love1-14/+6
This patch removes the use of the Scsi_Host's host_lock within fc_queuecommand. It also removes the DEF_SCSI_QCMD usage so that libfc has fully moved on to the new queuecommand interface. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Reviewed-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12[SCSI] libfc: fix sparse static and non-ANSI warningsRandy Dunlap1-3/+3
Fix sparse warning for non-ANSI function declaration. Declare workqueue structs as static. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Robert Love <robert.w.love@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12[SCSI] libfc:prevent dereferencing ERR_PTR in fc_tm_done()Dan Carpenter1-1/+1
If we goto out, then it tries to call kfree_skb() on an ERR_PTR which will oops. Just return directly. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12[SCSI] libfc: Return a valid return code in fc_fcp_pkt_abort()Hillf Danton1-3/+4
Here ticks_left is added to record the result of wait_for_completion_timeout(). [ Patch title and description edited by Robert Love to make it more descriptive ] Signed-off-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12[SCSI] libfc: always initialize the FCoE DDP exchange id for fsp as ↵Yi Zou1-3/+1
FC_XID_UNKNOWN The fsp's xfer_ddp is used as indication of the exchange id for the DDPed I/O. We should always initialize it as FC_XID_UNKNOWN for a newly allocated fsp, otherwise the fsp allocated in fc_fcp, i.e., not from queuecommand like LUN RESET that is not doing DDP may still think DDP is setup for it since xid 0 is valid and goes on to call fc_fcp_ddp_done() in fc_fcp_resp() from fc_tm_done(). So, set xfer_ddp as FC_XID_UNKNOWN in fc_fcp_pkt_alloc() now. Also removes the setting of fsp->lp as it's already done when fsp is allocated. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2010-12-22Merge branch 'master' into for-nextJiri Kosina1-17/+11
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-21[SCSI] libfc: fix statistics for FCP input/output megabytesJoe Eykholt1-2/+2
The statistics for InputMegabytes and OutputMegabytes are misnamed. They're accumulating bytes, not megabytes. The statistic returned via /sys must be in megabytes, however, which is what the HBA-API wants. The FCP code needs to accumulate it in bytes and then divide by 1,000,000 (not 2^20) before it presented via sysfs. This affects fcoe.ko only, not fnic. The fnic driver correctly by accumulating bytes and then converts to megabytes. I checked that libhbalinux is using the /sys file directly without conversion. BTW, qla2xxx does divide by 2^20, which I'm not fixing here. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] libfc: fix fc_tm_done not freeing the allocated fsp pktYi Zou1-7/+7
Frame should be freed in fc_tm_done, this is an updated patch on the one initially submitted by Hillf Danton. Signed-off-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] libfc: the timeout for the REC itself is 2 * R_A_TOV_elsYi Zou1-5/+2
The timeout for the exchange carrying REC itself is 2 * R_A_TOV_els. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] libfc: do not fc_io_compl on fsp w/o any scsi_cmnd associatedYi Zou1-1/+7
Do not call fc_io_compl() on fsp w/o any scsi_cmnd, e.g., lun reset is built inside fc_fcp, not from a scsi command from queuecommnd from scsi-ml, so in in case target is buggy that is invalid flags in the FCP_RSP, as we have seen in some SAN Blaze target where all bits in flags are 0, we do not want to call io_compl on this fsp. [ Comment block added by Robert Love ] Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] libfc: remove tgt_flags from fc_fcp_pkt structjohn fastabend1-3/+2
We can easily remove the tgt_flags from fc_fcp_pkt struct and use rpriv->tgt_flags directly where needed. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] libfc: use rport timeout values for fcp recoveryjohn fastabend1-16/+42
Use the rport value for rec_tov for timeout values when sending fcp commands. Currently, defaults are being used which may or may not match the advertised values. The default may cause i/o to timeout on networks that set this value larger then the default value. To make the timeout more configurable in the non-REC mode we remove the FC_SCSI_ER_TIMEOUT completely allowing the scsi-ml to do the timeout. This removes an unneeded timer and allows the i/o timeout to be configured using the scsi-ml knobs. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] libfc: incorrect scsi host byte codes returned to scsi-mljohn fastabend1-20/+41
The fcp packet recovery handler fc_fcp_recover() is called when errors occurr in a fcp session. Currently it is generically setting the status code to FC_CMD_RECOVERY for all error types. This results in DID_BUS_BUSY errors being returned to the scsi-ml. DID_BUS_BUSY errors indicate "BUS stayed busy through time out period" according to scsi.h. Many of the error reported by fc_rcp_recovery() are pkt errors. Here we update fc_fcp_recovery to use better host byte codes. With certain FAST FAIL flags set DID_BUS_BUSY and DID_ERROR will have different behaviors this was causing dm multipath to fail quickly in some cases where a retry would be a better action. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] libfc: fix stats computation in fc_queuecommand()Hillf Danton1-2/+2
There seems accumulation needed. Signed-off-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] libfc: Fix incorrect locking and unlocking in FCPRobert Love1-1/+1
The error handler grabs the si->scsi_queue_lock, but in the case where the fsp pointer is NULL it releases the scsi_host lock. This can lead to a variety of system hangs depending on which is used first- the scsi_host lock or the scsi_queue_lock. This patch simply unlocks the correct lock when fcp is NULL. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-11-17SCSI host lock push-downJeff Garzik1-1/+3
Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König1-1/+1
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-26[SCSI] libfc: possible race could panic system due to NULL fsp->cmdVasu Dev1-12/+6
It is unlikely but in case if it hits then it would cause panic due to null cmd ptr, so far only one instance seen recently with ESX though this was introduced long ago with this commit:- commit c1ecb90a66c5afc7cc5c9349f9c3714eef4a5cfb Author: Chris Leech <christopher.leech@intel.com> Date: Thu Dec 10 09:59:26 2009 -0800 [SCSI] libfc: reduce hold time on SCSI host lock Currently fsp->cmd is set to NULL w/o scsi_queue_lock before dequeuing from scsi_pkt_queue and that could cause NULL fsp->cmd in fc_fcp_cleanup_each_cmd for cmd completing with fsp->cmd = NULL after fc_fcp_cleanup_each_cmd taken reference. No need to set fsp->cmd to NULL as this is also protected by fc_fcp_lock_pkt(), for above race the fc_fcp_lock_pkt() in fc_fcp_cleanup_each_cmd() will fail as that cmd is already done. Mike mentioned same issue at http://www.open-fcoe.org/pipermail/devel/2010-September/010533.html Similarly moved sc_cmd->SCp.ptr = NULL under scsi_queue_lock so that scsi abort error handler won't abort on completed cmds. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26[SCSI] libfc: use DID_TRANSPORT_DISRUPTED while lport not readyVasu Dev1-4/+2
This is per Mile Christie feedback since in this case IO could get retried for tape devices and therefore DID_REQUEUE cannot be used, more details in this thread. http://marc.info/?l=linux-scsi&m=127970522630136&w=2 Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] libfc: call fc_remote_port_chkready under the host lock.Mike Christie1-2/+2
The rport port state and flags are set under the host lock, so this patch calls fc_remote_port_chkready with the host lock held like is also done in the other fc drivers. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfc: add fc_fill_reply_hdr() and fc_fill_hdr()Joe Eykholt1-3/+3
Add functions to fill in an FC header given a request header. These reduces code lines in fc_lport and fc_rport and works without an exchange/sequence assigned. fc_fill_reply_hdr() fills a header for a final reply frame. fc_fill_hdr() which is similar but allows specifying the f_ctl parameter. Add defines for F_CTL values FC_FCTL_REQ and FC_FCTL_RESP. These can be used for most request and response sequences. v2 of patch adds a line to copy the frame encapsulation info from the received frame. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfc: IO errors on link down due to cable unplugVasu Dev1-0/+5
In this case, sync IO fails with EIO(5) errors as:- "Thread:1 System call error:5 - Input/output error (::pwrite() failed)". This is due to IO time out while libfc doing link down processing to block all rports and if timed out IO was at last retry attempt then it fails to user with EIO error followed by these log messages. [77848.612169] host2: rport bf0015: Delete port [77848.612221] host2: rport e10aef: work delete [77848.612232] host2: rport e10002: work event 3 [77848.612422] sd 2:0:1:1: [sdi] Unhandled error code [77848.612426] sd 2:0:1:1: [sdi] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [77848.612431] sd 2:0:1:1: [sdi] CDB: Write(10): 2a 00 00 00 11 20 00 00 20 00 [77848.612445] end_request: I/O error, dev sdi, sector 4384 [77848.612553] sd 2:0:1:2: [sdj] Unhandled error code To fix these EIO errors, such timed out incomplete IOs needs to be re-queued without counting retry attempt and this patch does that using DID_REQUEUE scsi code. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfc: fix slowpath error from WARN_ON in fc_fcp_send_dataYi Zou1-2/+0
This is exposed by a mpio test using EMC CLARiiON targets when LUN tresspassing happens, the burst length from the XFER_READY for the MODE SELECT(10) is 19 bytes, much smaller than FC_MIN_MAX_PAYLOAD as 256 bytes. This patch removes the related two WARN_ON()s. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] libfc: lport state is enum not bit maskYi Zou1-1/+1
lport state is enum not bit mask. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-17[SCSI] libfc: Move the port_id into lportRobert Love1-7/+7
This patch creates a port_id member in struct fc_lport. This allows libfc to just deal with fc_lport instances instead of calling into the fc_host to get the port_id. This change helps in only using symbols necessary for operation from the libfc structures. libfc still needs to change the fc_host_port_id() if the port_id changes so the presentation layer (scsi_transport_fc) can provide the user with the correct value, but libfc shouldn't rely on the presentation layer for operational values. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>