summaryrefslogtreecommitdiff
path: root/drivers/scsi/fnic
AgeCommit message (Collapse)AuthorFilesLines
2016-04-11fnic: Using rport->dd_data to check rport online instead of rport_lookup.Satish Kharat2-10/+12
When issuing I/O we check if rport is online through libfc rport_lookup() function which needs to be protected by mutex lock that cannot acquired in I/O context. The change is to use midlayer remote port s dd_data which is preserved until its devloss timeout and no protection is required. The the scsi_cmnd error code is expected to be in the left 16 bits of the result field. Changed to correct this. Fnic driver version changed from 1.6.0.20 to 1.6.0.21 Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-11fnic: Cleanup the I/O pending with fw and has timed out and is used to issue ↵Satish Kharat2-11/+29
LUN reset In case of LUN reset, the device reset command is issued with one of the I/Os that has timed out on that LUN. The change is to also return this I/O with error status set to DID_RESET. In case when the reset is issued using the sg_reset tool (from sg3_utils) it is a new command and new_sc is set to 1. Fnic driver version changed from 1.6.0.19 to 1.6.0.20 [mkp: Fixed checkpatch warning] Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-11fnic: Fix to cleanup aborted IO to avoid device being offlined by mid-layerSatish Kharat2-7/+28
If an I/O times out and an abort issued by host, if the abort is successful we need to set scsi status as DID_ABORT. Or else the mid-layer error handler which looks for this error code, will offline the device. Also if the original I/O is not found in fnic firmware, we will consider the abort as successful. The start_time assignment is moved because of the new goto. Fnic driver version changed from 1.6.0.17a to 1.6.0.19, version 1.6.0.18 has been skipped [mkp: Fixed checkpatch warning] Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-03-18fnic: move printk()s outside of the critical code section.Maurizio Lombardi1-7/+6
This patch moves a printk() outside of the code section where interrupt are disabled. In some cases a flood of error messages may cause a kernel panic. It also removes one of the printk()s because the same error message was printed twice. [709686.317197] Kernel panic - not syncing: Watchdog detected hard LOCKUP on cpu 12 [709686.317200] CPU: 12 PID: 1963 Comm: systemd-journal Tainted: GF O-------------- 3.10.0-229.el7.x86_64 #1 [709686.317201] Hardware name: Cisco Systems Inc UCSB-B200-M3/UCSB-B200-M3, BIOS B200M3.2.2.3.6.030620151309 03/06/2015 [709686.317206] ffffffff8182b2e8 00000000392722ba ffff88046fcc5c48 ffffffff81603f36 [709686.317209] ffff88046fcc5cc8 ffffffff815fd7da 0000000000000010 ffff88046fcc5cd8 [709686.317211] ffff88046fcc5c78 00000000392722ba ffff88046fcc5c88 000000000000000c [709686.317212] Call Trace: [709686.317221] <NMI> [<ffffffff81603f36>] dump_stack+0x19/0x1b [709686.317223] [<ffffffff815fd7da>] panic+0xd8/0x1e7 [709686.317227] [<ffffffff8110a760>] ? watchdog_enable_all_cpus.part.2+0x40/0x40 [709686.317229] [<ffffffff8110a822>] watchdog_overflow_callback+0xc2/0xd0 [709686.317233] [<ffffffff8114c901>] __perf_event_overflow+0xa1/0x250 [709686.317235] [<ffffffff8114d404>] perf_event_overflow+0x14/0x20 [709686.317239] [<ffffffff810301fd>] intel_pmu_handle_irq+0x1fd/0x410 [709686.317242] [<ffffffff811908d1>] ? unmap_kernel_range_noflush+0x11/0x20 [709686.317246] [<ffffffff81373574>] ? ghes_copy_tofrom_phys+0x124/0x210 [709686.317249] [<ffffffff8160cfcb>] perf_event_nmi_handler+0x2b/0x50 [709686.317251] [<ffffffff8160c719>] nmi_handle.isra.0+0x69/0xb0 [709686.317252] [<ffffffff8160c830>] do_nmi+0xd0/0x340 [709686.317256] [<ffffffff8160bb71>] end_repeat_nmi+0x1e/0x2e [709686.317260] [<ffffffff812e24fd>] ? memcpy+0xd/0x110 [709686.317263] [<ffffffff812e24fd>] ? memcpy+0xd/0x110 [709686.317265] [<ffffffff812e24fd>] ? memcpy+0xd/0x110 [709686.317269] <<EOE>> [<ffffffff8132c297>] ? vgacon_scroll+0x2d7/0x330 [709686.317273] [<ffffffff813a086c>] scrup+0xfc/0x110 [709686.317275] [<ffffffff813a0920>] lf+0xa0/0xb0 [709686.317278] [<ffffffff813a1b32>] vt_console_print+0x2d2/0x420 [709686.317283] [<ffffffff8106f4a1>] call_console_drivers.constprop.15+0x91/0xf0 [709686.317287] [<ffffffff8107069f>] console_unlock+0x3bf/0x400 [709686.317291] [<ffffffff81070996>] vprintk_emit+0x2b6/0x530 [709686.317294] [<ffffffff815fd961>] printk_emit+0x44/0x5b [709686.317297] [<ffffffff81070d98>] devkmsg_writev+0x158/0x1d0 [709686.317303] [<ffffffff811c5ef9>] do_sync_readv_writev+0x79/0xd0 [709686.317307] [<ffffffff811c73ee>] do_readv_writev+0xce/0x260 [709686.317310] [<ffffffff811c8d18>] ? __sb_start_write+0x58/0x110 [709686.317314] [<ffffffff811c7615>] vfs_writev+0x35/0x60 [709686.317318] [<ffffffff811c776c>] SyS_writev+0x5c/0xd0 [709686.317322] [<ffffffff81613da9>] system_call_fastpath+0x16/0x1b Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-10scsi: use host wide tags by defaultChristoph Hellwig1-8/+0
This patch changes the !blk-mq path to the same defaults as the blk-mq I/O path by always enabling block tagging, and always using host wide tags. We've had blk-mq available for a few releases so bugs with this mode should have been ironed out, and this ensures we get better coverage of over tagging setup over different configs. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-10-27fnic: check pci_map_single() return valueMaurizio Lombardi2-8/+54
the kernel prints some warnings when compiled with CONFIG_DMA_API_DEBUG. This is because the fnic driver doesn't check the return value of pci_map_single(). [ 11.942770] scsi host12: fnic [ 11.950811] ------------[ cut here ]------------ [ 11.950818] WARNING: at lib/dma-debug.c:937 check_unmap+0x47b/0x920() [ 11.950821] fnic 0000:0c:00.0: DMA-API: device driver failed to check map error[device address=0x0000002020a30040] [size=44 bytes] [mapped as single] Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed By: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-18fnic: Use the local variable instead of I/O flag to acquire io_req_lock in ↵Hiral Shah2-2/+4
fnic_queuecommand() to avoid deadloack We added changes in fnic driver patch 1.6.0.16 to acquire io_req_lock in fnic_queuecommand() before issuing I/O so that io completion is serialized. But when releasing the lock we check for the I/O flag and this could be modified if IO abort occurs before I/O completion. In this case we wont release the lock and causes deadlock in some scenerios. Using the local variable to check the IO lock status will resolve the problem. Fixes: 41df7b02db82cf6c14f094757bac3830d10a827f Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-03x86/mm: Decouple <linux/vmalloc.h> from <asm/io.h>Stephen Rothwell2-0/+2
Nothing in <asm/io.h> uses anything from <linux/vmalloc.h>, so remove it from there and fix up the resulting build problems triggered on x86 {64|32}-bit {def|allmod|allno}configs. The breakages were triggering in places where x86 builds relied on vmalloc() facilities but did not include <linux/vmalloc.h> explicitly and relied on the implicit inclusion via <asm/io.h>. Also add: - <linux/init.h> to <linux/io.h> - <asm/pgtable_types> to <asm/io.h> ... which were two other implicit header file dependencies. Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> [ Tidied up the changelog. ] Acked-by: David Miller <davem@davemloft.net> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Colin Cross <ccross@android.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: James E.J. Bottomley <JBottomley@odin.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Kristen Carlson Accardi <kristen@linux.intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Suma Ramars <sramars@cisco.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-30fnic: IOMMU Fault occurs when IO and abort IO is out of orderAnil Chintalapati (achintal)2-1/+16
When I/O is aborted by mid-layer, fnic FW will complete the I/O before completing the abort task. In some cases abort request is completed before the I/O, which could lead to inconsistent driver and firmware states. In this case firmware reset would clear the inconsistent state. Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-04scsi: remove ->change_queue_type methodChristoph Hellwig1-1/+0
Since we got rid of ordered tag support in 2010 the prime use case of switching on and off ordered tags has been obsolete. The other function of enabling/disabling tagging entirely has only been correctly implemented by the 53c700 driver and isn't generally useful. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24scsi: drop reason argument from ->change_queue_depthChristoph Hellwig1-2/+2
Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24scsi: avoid ->change_queue_depth indirection for queue full trackingChristoph Hellwig1-0/+1
All drivers use the implementation for ramping the queue up and down, so instead of overloading the change_queue_depth method call the implementation diretly if the driver opts into it by setting the track_queue_depth flag in the host template. Note that a few drivers validated the new queue depth in their change_queue_depth method, but as we never go over the queue depth set during slave_configure or the sysfs file this isn't nessecary and can safely be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
2014-11-20Fnic: Fnic Driver crashed with NULL pointer referenceHiral Shah2-4/+19
When issuing I/O request, if the I/O completes before returning from fnic_queuecommand(), we may be referencing scsi_cmnd structure that may be freed by interrupt handler. Acquring IO lock would synchronize fnic_queuecommand and interrupt handler. - Increment fnic version from 1.6.0.15 to 1.6.0.16 Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20Fnic: For Standalone C series, "sending VLAN request" message seen even if ↵Hiral Shah2-1/+6
the link is down When physical link between standalone C series and switch is down, the fip timer is not turned off and timer expiration will keep sending vlan request. It can be fixed by stopping the fip_timer and it will be restarted automatically when Link is up. - Increment fnic version from 1.6.0.14 to 1.6.0.15 Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20Fnic: Improper resue of exchange IdsHiral Shah2-1/+12
IOs belonging to an rport are aborted with Internal terminate option when rport goes offline. Any new IO issued to the rport during this time can reuse the terminated exchange which will cause inconsistent state of the exchange between local port and remote port. fc_rport_priv is set to RPORT_ST_DELETE before exchanges are aborted by libfc. Not issuing amy more I/O requests when RPORT_ST_DELETE is set, will avoid inconsistent state of the exchange between local port and remote port. - Increment fnic version from 1.6.0.13 to 1.6.0.14 Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20Fnic: Memcopy only mimumum of data or trace bufferHiral Shah2-3/+3
In case of receive path, we do not have eth header or fcoe header available when we take a trace so we fill the fc trace buffer with 0xff for both values. We copy only mimimum of received data or trace buffer size - fc header - eth and fcoe header - Increment fnic version from 1.6.0.12 to 1.6.0.13 Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20Fnic: Not probing all the vNICS via fnic_probe on bootHiral Shah2-3/+12
In fnic_dev_wait, Wait for finish to complete at least three times in two seconds while loop before returning -ETIMEDOUT as sometime schedule_timeout_uninterruptible takes more than two seconds to wake up. - Increment fnic version from 1.6.0.11 to 1.6.0.12 Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: don't force tagged_supported in driversChristoph Hellwig1-2/+0
Now that we also get proper values in cmd->request->tag for untagged commands, there is no need to force tagged_supported to on in drivers that need host-wide tags. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: don't set tagging state from scsi_adjust_queue_depthChristoph Hellwig1-1/+1
Remove the tagged argument from scsi_adjust_queue_depth, and just let it handle the queue depth. For most drivers those two are fairly separate, given that most modern drivers don't care about the SCSI "tagged" status of a command at all, and many old drivers allow queuing of multiple untagged commands in the driver. Instead we start out with the ->simple_tags flag set before calling ->slave_configure, which is how all drivers actually looking at ->simple_tags except for one worke anyway. The one other case looks broken, but I've kept the behavior as-is for now. Except for that we only change ->simple_tags from the ->change_queue_type, and when rejecting a tag message in a single driver, so keeping this churn out of scsi_adjust_queue_depth is a clear win. Now that the usage of scsi_adjust_queue_depth is more obvious we can also remove all the trivial instances in ->slave_alloc or ->slave_configure that just set it to the cmd_per_lun default. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-11-12scsi: always assign block layer tags if enabledChristoph Hellwig1-1/+2
Allow a driver to ask for block layer tags by setting .use_blk_tags in the host template, in which case it will always see a valid value in request->tag, similar to the behavior when using blk-mq. This means even SCSI "untagged" commands will now have a tag, which is especially useful when using a host-wide tag map. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: remove abuses of scsi_populate_tagChristoph Hellwig1-9/+2
Unless we want to build a SPI tag message we should just check SCMD_TAGGED instead of reverse engineering a tag type through the use of scsi_populate_tag_msg. Also rename the function to spi_populate_tag_msg, make it behave like the other spi message helpers, and move it to the spi transport class. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: provide a generic change_queue_type methodChristoph Hellwig1-1/+1
Most drivers use exactly the same implementation, so provide it as a library function. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-10-08Merge tag 'scsi-for-linus' of ↵Linus Torvalds3-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This patch set consists of the usual driver updates (megaraid_sas, arcmsr, be2iscsi, lpfc, mpt2sas, mpt3sas, qla2xxx, ufs) plus several assorted fixes and miscellaneous updates (including the pci_msix_enable_range() changes that have been pending for a while)" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (202 commits) scsi: add a CONFIG_SCSI_MQ_DEFAULT option ufs: definitions for phy interface ufs: tune bkops while power managment events ufs: Add support for clock scaling using devfreq framework ufs: Add freq-table-hz property for UFS device ufs: Add support for clock gating ufs: refactor configuring power mode ufs: add UFS power management support ufs: introduce well known logical unit in ufs ufs: manually add well known logical units ufs: Active Power Mode - configuring bActiveICCLevel ufs: improve init sequence ufs: refactor query descriptor API support ufs: add voting support for host controller power ufs: Add clock initialization support ufs: Add regulator enable support ufs: Allow vendor specific initialization scsi: don't add scsi_device if its already visible scsi: fix the type for well known LUs scsi: fix comment in struct Scsi_Host definition ...
2014-09-16fnic: assign FIP_ALL_FCF_MACS to fcoe_all_fcfsHiral Shah3-6/+6
1) Assgning FIP_ALL_FCF_MACS to fcoe_all_fcfs allows VLAN request to be sent to correct Mac address for VLAN Discovery otherwise VLAN request will be sent to invalid address hence FLOGI never happens. 2) Simplify the copy_and_format_trace_data code and log the correct Link event for fnic control path tracing in case of link status UP->UP. 3) Increment Fnic driver version Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-01treewide: fix errors in printkMasanari Iida2-2/+2
This patch fix spelling typo in printk. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29fnic: Use pci_enable_msix_exact() instead of pci_enable_msix()Alexander Gordeev1-2/+2
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: "Suma Ramars (sramars)" <sramars@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26fnic: reject device resets without assigned tags for the blk-mq caseChristoph Hellwig1-0/+16
Current the midlayer fakes up a struct request for the explicit reset ioctls, and those don't have a tag allocated to them. The fnic driver pokes into midlayer structures to paper over this design issue, but that won't work for the blk-mq case. Either someone who can actually test the hardware will have to come up with a similar hack for the blk-mq case, or we'll have to bite the bullet and fix the way the EH ioctls work for real, but until that happens we fail these explicit requests here. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Webb Scales <webbnh@hp.com> Acked-by: Jens Axboe <axboe@kernel.dk> Tested-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Robert Elliott <elliott@hp.com> Cc: Hiral Patel <hiralpat@cisco.com> Cc: Suma Ramars <sramars@cisco.com> Cc: Brian Uchino <buchino@cisco.com>
2014-07-18scsi: use 64-bit LUNsHannes Reinecke1-2/+2
The SCSI standard defines 64-bit values for LUNs, and large arrays employing large or hierarchical LUN numbers become more and more common. So update the linux SCSI stack to use 64-bit LUN numbers. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19fnic: fnic Control Path Trace UtilityHiral Shah6-43/+637
Fnic Ctlr Path Trace utility is a tracing functionality built directly into fnic driver to trace the control path frames like discovery, FLOGI request/reply, PLOGI request/reply, link event etc. It will be one trace file for all fnics. It will help us to debug and resolve the discovery and initialization related issues in more convenient way. This trace information includes time stamp, Host Number, Frame type, Frame Length and Frame. By default,64 pages are allocated but we can change the number of allocated pages by module parameter fnic_fc_trace_max_page. Each entry is of 256 byte and available entries are depends on allocated number of pages. We can turn on or off the fnic control path trace functionality by module paramter fc_trace_enable and/or reset the trace contain by module paramter fc_trace_clear. Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19fnic: Failing to queue aborts due to Q full cause terminate driver timeoutHiral Shah1-6/+7
In fnic abort handler, abort queuing can be failed when hardware queue is full. The command state is left as abort queued. The command with abort queued state will never be queued next time for abort or termiantion. Fix restores the command state in above case. Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Narsimhulu Musini <nmusini@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19fnic: NoFIP solicitation frame in NONFIP mode and changed IO Throttle countHiral Shah3-7/+4
This patch contains following three minor fixes. 1) During Probe, fnic was sending FIP solicitation in Non FIP mode which is not expected, setting the internal fip state to Non FIP mode explicitly, avoids sending FIP frame. 2) When target goes offline, all outstanding IOs belong to the target will be terminated by driver, If the termination count is high, then it influences firmware responsiveness. To improve the responsiveness, default IO throttle count is reduced to 256. 3) Accessing Virtual Fabric Id (vfid) and fc_map of Fibre-Channel Forwarder(FCF) is invalid in fnic driver when Clear Virtual Link(CVL) is received prior to receiving flogi reject from switch. As CVL clears all FCFs. Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Narsimhulu Musini <nmusini@cisco.com> Signed-off-by: Anantha Tungarakodi <atungara@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2013-11-16Merge branch 'for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...
2013-11-10Merge tag 'fcoe-3.13' into for-linusJames Bottomley1-3/+3
Pull Request for 3.13 for FCOE tree. Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] fnic: Incremented driver versionHiral Patel1-1/+1
Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] fnic: Fnic Statistics CollectionHiral Patel9-24/+971
This feature gathers active and cumulative per fnic stats for io, abort, terminate, reset, vlan discovery path and it also includes various important stats for debugging issues. It also provided debugfs and ioctl interface for user to retrieve these stats. It also provides functionality to reset cumulative stats through user interface. Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] fnic: host reset returns nonzero value(errno) on successNarsimhulu Musini1-5/+4
Fixed appropriate error codes that returns negative error number on failure, and 0 on success. fnic_reset() is used directly by the fc transport callback issue_fc_host_lip which requires a negative error number on failure. Signed-off-by: Narsimhulu Musini <nmusini@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-14scsi: Convert uses of compare_ether_addr to ether_addr_equalJoe Perches1-3/+3
Preliminary to removing compare_ether_addr altogether: Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-10-14SCSI: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
Since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound), the driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: James Bottomley <JBottomley@parallels.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-12[SCSI] fnic: fnic Driver Tuneables Exposed through CLIHiral Patel4-18/+34
Introduced module params to provide dynamic way of configuring queue depth. Added support to get max io throttle count through UCSM to configure maximum outstanding IOs supported by fnic and push that value to scsi mid-layer. Supported IO throttle values: UCSM IO THROTTLE VALUE FNIC MAX OUTSTANDING IOS ------------------------------------------------------ 16 (Default) 2048 <= 256 256 > 256 <ucsm value> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-12[SCSI] fnic: Kernel panic while running sh/nosh with max lun cfgSesidhar Beddel1-3/+20
Kernel panics due to NULL lport while executing the log message because of synchronization issues between libfc and scsi transport fc. Checking for NULL pointers at the beginning of this routine would resolve the issue from kernel panic point of view. Signed-off-by: Sesidhar Baddel <sebaddel@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-12[SCSI] fnic: Hitting BUG_ON(io_req->abts_done) in fnic_rport_exch_resetSesidhar Beddel1-28/+42
Hitting BUG_ON(io_req->abts_done) in fnic_rport_exch_reset in case of timing issue and also to some extent locking issue where abts and terminate is happening around same timing. The code changes are intended to update CMD_STATE(sc) and io_req->abts_done together. Signed-off-by: Sesidhar Beddel <sebaddel@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-12[SCSI] fnic: Remove QUEUE_FULL handling codeSuma Ramars1-32/+0
Remove fnic driver QUEUE_FULL handling code instead let SCSI mid layer handle queue full and use its algorithm to ramp down/up queue Signed-off-by: Suma Ramars <sramars@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-12[SCSI] fnic: On system with >1.1TB RAM, VIC fails multipath after boot upBrian Uchino1-4/+4
Issue was seen when SCSI buffer address is more than 40 bits in system with more than 1.1TB RAM. When SCSI buffer is passed to VIC, it is failing to map to correct buffer address, as DMA mask is set to 40 bits in driver initialization. Corrected DMA_MASK from 40-bits to 64-bits to avoid masking 41-64 bits addresses. Signed-off-by: Brian Uchino <buchino@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-11[SCSI] fnic: FC stat param seconds_since_last_reset not getting updatedNarsimhulu Musini2-1/+112
Code to reset fc_host statistics. echo 1 > /sys/class/fc_host/hostX/statistics/reset_statistics clears fc_host stats, the code also issues command to fnic firmware to clear vnic stats. Signed-off-by: Narsimhulu Musini <nmusini@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-03[SCSI] fnic: BUG: sleeping function called from invalid context during probeChris Leech2-14/+10
I hit this during driver probe with the latest fnic updates (this trace is from a backport into a distro kernel, but the issue is the same). > BUG: sleeping function called from invalid context at mm/slab.c:3113 > in_atomic(): 0, irqs_disabled(): 1, pid: 610, name: work_for_cpu > INFO: lockdep is turned off. > irq event stamp: 0 > hardirqs last enabled at (0): [<(null)>] (null) > hardirqs last disabled at (0): [<ffffffff81070aa5>] > copy_process+0x5e5/0x1670 > softirqs last enabled at (0): [<ffffffff81070aa5>] > copy_process+0x5e5/0x1670 > softirqs last disabled at (0): [<(null)>] (null) > Pid: 610, comm: work_for_cpu Not tainted > Call Trace: > [<ffffffff810b2d10>] ? print_irqtrace_events+0xd0/0xe0 > [<ffffffff8105c1a7>] ? __might_sleep+0xf7/0x130 > [<ffffffff81184efb>] ? kmem_cache_alloc_trace+0x20b/0x2d0 > [<ffffffff8109709e>] ? __create_workqueue_key+0x3e/0x1d0 > [<ffffffff8109709e>] ? __create_workqueue_key+0x3e/0x1d0 > [<ffffffffa00c101c>] ? fnic_probe+0x977/0x11aa [fnic] > [<ffffffffa00c1048>] ? fnic_probe+0x9a3/0x11aa [fnic] > [<ffffffff81096f00>] ? do_work_for_cpu+0x0/0x30 > [<ffffffff812c6da7>] ? local_pci_probe+0x17/0x20 > [<ffffffff81096f18>] ? do_work_for_cpu+0x18/0x30 > [<ffffffff8109cdc6>] ? kthread+0x96/0xa0 > [<ffffffff8100c1ca>] ? child_rip+0xa/0x20 > [<ffffffff81550f80>] ? _spin_unlock_irq+0x30/0x40 > [<ffffffff8100bb10>] ? restore_args+0x0/0x30 > [<ffffffff8109cd30>] ? kthread+0x0/0xa0 > [<ffffffff8100c1c0>] ? child_rip+0x0/0x20 The problem is in this hunk of "FIP VLAN Discovery Feature Support" (d3c995f1dcf938f1084388d92b8fb97bec366566) create_singlethreaded_workqueue cannot be called with irqs disabled @@ -620,7 +634,29 @@ static int __devinit fnic_probe(struct pci_dev *pdev, vnic_dev_packet_filter(fnic->vdev, 1, 1, 0, 0, 0); vnic_dev_add_addr(fnic->vdev, FIP_ALL_ENODE_MACS); vnic_dev_add_addr(fnic->vdev, fnic->ctlr.ctl_src_addr); + fnic->set_vlan = fnic_set_vlan; fcoe_ctlr_init(&fnic->ctlr, FIP_MODE_AUTO); + setup_timer(&fnic->fip_timer, fnic_fip_notify_timer, + (unsigned long)fnic); + spin_lock_init(&fnic->vlans_lock); + INIT_WORK(&fnic->fip_frame_work, fnic_handle_fip_frame); + INIT_WORK(&fnic->event_work, fnic_handle_event); + skb_queue_head_init(&fnic->fip_frame_queue); + spin_lock_irqsave(&fnic_list_lock, flags); + if (!fnic_fip_queue) { + fnic_fip_queue = + create_singlethread_workqueue("fnic_fip_q"); + if (!fnic_fip_queue) { + spin_unlock_irqrestore(&fnic_list_lock, flags); + printk(KERN_ERR PFX "fnic FIP work queue " + "create failed\n"); + err = -ENOMEM; + goto err_out_free_max_pool; + } + } + spin_unlock_irqrestore(&fnic_list_lock, flags); + INIT_LIST_HEAD(&fnic->evlist); + INIT_LIST_HEAD(&fnic->vlans); } else { shost_printk(KERN_INFO, fnic->lport->host, "firmware uses non-FIP mode\n"); The attempts to make fnic_fip_queue a single instance for the driver while it's being created in probe look awkward anyway, why is this not created in fnic_init_module like the event workqueue? Signed-off-by: Chris Leech <cleech@redhat.com> Tested-by: Anantha Tungarakodi <atungara@cisco.com> Acked-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-04Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-4/+2
Pull first round of SCSI updates from James Bottomley: "The patch set is mostly driver updates (usf, zfcp, lpfc, mpt2sas, megaraid_sas, bfa, ipr) and a few bug fixes. Also of note is that the Buslogic driver has been rewritten to a better coding style and 64 bit support added. We also removed the libsas limitation on 16 bytes for the command size (currently no drivers make use of this)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (101 commits) [SCSI] megaraid: minor cut and paste error fixed. [SCSI] ufshcd-pltfrm: remove unnecessary dma_set_coherent_mask() call [SCSI] ufs: fix register address in UIC error interrupt handling [SCSI] ufshcd-pltfrm: add missing empty slot in ufs_of_match[] [SCSI] ufs: use devres functions for ufshcd [SCSI] ufs: Fix the response UPIU length setting [SCSI] ufs: rework link start-up process [SCSI] ufs: remove version check before IS reg clear [SCSI] ufs: amend interrupt configuration [SCSI] ufs: wrap the i/o access operations [SCSI] storvsc: Update the storage protocol to win8 level [SCSI] storvsc: Increase the value of scsi timeout for storvsc devices [SCSI] MAINTAINERS: Add myself as the maintainer for BusLogic SCSI driver [SCSI] BusLogic: Port driver to 64-bit. [SCSI] BusLogic: Fix style issues [SCSI] libiscsi: Added new boot entries in the session sysfs [SCSI] aacraid: Fix for arrays are going offline in the system. System hangs [SCSI] ipr: IOA Status Code(IOASC) update [SCSI] sd: Update WRITE SAME heuristics [SCSI] fnic: potential dead lock in fnic_is_abts_pending() ...
2013-06-29fnic: switch to fixed_size_llseek()Al Viro1-14/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-27[SCSI] fnic: potential dead lock in fnic_is_abts_pending()Dan Carpenter1-4/+2
There is an unlock missing if the == FNIC_IOREQ_ABTS_PENDING is false. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-16lseek(fd, n, SEEK_END) does *not* go to eof - nAl Viro1-1/+1
When you copy some code, you are supposed to read it. If nothing else, there's a chance to spot and fix an obvious bug instead of sharing it... X-Song: "I Got It From Agnes", by Tom Lehrer Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [ Tom Lehrer? You're dating yourself, Al ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-02[SCSI] fnic: Incremented driver versionHiral Patel1-1/+1
Signed-off-by: Brian Uchino <buchino@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 20:55:55 +0300