summaryrefslogtreecommitdiff
path: root/drivers/scsi/aacraid
AgeCommit message (Collapse)AuthorFilesLines
2024-10-10scsi: aacraid: Rearrange order of struct aac_srb_unitKees Cook1-1/+1
[ Upstream commit 6e5860b0ad4934baee8c7a202c02033b2631bb44 ] struct aac_srb_unit contains struct aac_srb, which contains struct sgmap, which ends in a (currently) "fake" (1-element) flexible array. Converting this to a flexible array is needed so that runtime bounds checking won't think the array is fixed size (i.e. under CONFIG_FORTIFY_SOURCE=y and/or CONFIG_UBSAN_BOUNDS=y), as other parts of aacraid use struct sgmap as a flexible array. It is not legal to have a flexible array in the middle of a structure, so it either needs to be split up or rearranged so that it is at the end of the structure. Luckily, struct aac_srb_unit, which is exclusively consumed/updated by aac_send_safw_bmic_cmd(), does not depend on member ordering. The values set in the on-stack struct aac_srb_unit instance "srbu" by the only two callers, aac_issue_safw_bmic_identify() and aac_get_safw_ciss_luns(), do not contain anything in srbu.srb.sgmap.sg, and they both implicitly initialize srbu.srb.sgmap.count to 0 during memset(). For example: memset(&srbu, 0, sizeof(struct aac_srb_unit)); srbcmd = &srbu.srb; srbcmd->flags = cpu_to_le32(SRB_DataIn); srbcmd->cdb[0] = CISS_REPORT_PHYSICAL_LUNS; srbcmd->cdb[1] = 2; /* extended reporting */ srbcmd->cdb[8] = (u8)(datasize >> 8); srbcmd->cdb[9] = (u8)(datasize); rcode = aac_send_safw_bmic_cmd(dev, &srbu, phys_luns, datasize); During aac_send_safw_bmic_cmd(), a separate srb is mapped into DMA, and has srbu.srb copied into it: srb = fib_data(fibptr); memcpy(srb, &srbu->srb, sizeof(struct aac_srb)); Only then is srb.sgmap.count written and srb->sg populated: srb->count = cpu_to_le32(xfer_len); sg64 = (struct sgmap64 *)&srb->sg; sg64->count = cpu_to_le32(1); sg64->sg[0].addr[1] = cpu_to_le32(upper_32_bits(addr)); sg64->sg[0].addr[0] = cpu_to_le32(lower_32_bits(addr)); sg64->sg[0].count = cpu_to_le32(xfer_len); But this is happening in the DMA memory, not in srbu.srb. An attempt to copy the changes back to srbu does happen: /* * Copy the updated data for other dumping or other usage if * needed */ memcpy(&srbu->srb, srb, sizeof(struct aac_srb)); But this was never correct: the sg64 (3 u32s) overlap of srb.sg (2 u32s) always meant that srbu.srb would have held truncated information and any attempt to walk srbu.srb.sg.sg based on the value of srbu.srb.sg.count would result in attempting to parse past the end of srbu.srb.sg.sg[0] into srbu.srb_reply. After getting a reply from hardware, the reply is copied into srbu.srb_reply: srb_reply = (struct aac_srb_reply *)fib_data(fibptr); memcpy(&srbu->srb_reply, srb_reply, sizeof(struct aac_srb_reply)); This has always been fixed-size, so there's no issue here. It is worth noting that the two callers _never check_ srbu contents -- neither srbu.srb nor srbu.srb_reply is examined. (They depend on the mapped xfer_buf instead.) Therefore, the ordering of members in struct aac_srb_unit does not matter, and the flexible array member can moved to the end. (Additionally, the two memcpy()s that update srbu could be entirely removed as they are never consumed, but I left that as-is.) Signed-off-by: Kees Cook <kees@kernel.org> Link: https://lore.kernel.org/r/20240711215739.208776-1-kees@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04scsi: aacraid: Fix double-free on probe failureBen Hutchings1-0/+2
[ Upstream commit 919ddf8336f0b84c0453bac583808c9f165a85c2 ] aac_probe_one() calls hardware-specific init functions through the aac_driver_ident::init pointer, all of which eventually call down to aac_init_adapter(). If aac_init_adapter() fails after allocating memory for aac_dev::queues, it frees the memory but does not clear that member. After the hardware-specific init function returns an error, aac_probe_one() goes down an error path that frees the memory pointed to by aac_dev::queues, resulting.in a double-free. Reported-by: Michael Gordon <m.gordon.zelenoborsky@gmail.com> Link: https://bugs.debian.org/1075855 Fixes: 8e0c5ebde82b ("[SCSI] aacraid: Newer adapter communication iterface support") Signed-off-by: Ben Hutchings <benh@debian.org> Link: https://lore.kernel.org/r/ZsZvfqlQMveoL5KQ@decadent.org.uk Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-01Revert "scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity"Martin K. Petersen4-43/+3
commit c5becf57dd5659c687d41d623a69f42d63f59eb2 upstream. This reverts commit 9dc704dcc09eae7d21b5da0615eb2ed79278f63e. Several reports have been made indicating that this commit caused hangs. Numerous attempts at root causing and fixing the issue have been unsuccessful so let's revert for now. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217599 Cc: <stable@vger.kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-31Merge branch '6.5/scsi-fixes' into 6.6/scsi-stagingMartin K. Petersen1-1/+1
Pull in the fixes tree for a commit that missed 6.5. Also resolve a trivial merge conflict in fnic. * 6.5/scsi-fixes: (36 commits) scsi: storvsc: Handle additional SRB status values scsi: snic: Fix double free in snic_tgt_create() scsi: core: raid_class: Remove raid_component_add() scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW major version > 5 scsi: ufs: mcq: Fix the search/wrap around logic scsi: qedf: Fix firmware halt over suspend and resume scsi: qedi: Fix firmware halt over suspend and resume scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock scsi: lpfc: Remove reftag check in DIF paths scsi: ufs: renesas: Fix private allocation scsi: snic: Fix possible memory leak if device_add() fails scsi: core: Fix possible memory leak if device_add() fails scsi: core: Fix legacy /proc parsing buffer overflow scsi: 53c700: Check that command slot is not NULL scsi: fnic: Replace return codes in fnic_clean_pending_aborts() scsi: storvsc: Fix handling of virtual Fibre Channel timeouts scsi: pm80xx: Fix error return code in pm8001_pci_probe() scsi: zfcp: Defer fc_rport blocking until after ADISC response scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices scsi: sg: Fix checking return value of blk_get_queue() ... Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-25scsi: core: Improve type safety of scsi_rescan_device()Bart Van Assche1-1/+1
Most callers of scsi_rescan_device() have the scsi_device pointer readily available. Pass a struct scsi_device pointer to scsi_rescan_device() instead of a struct device pointer. This change prevents that a pointer to another struct device would be passed accidentally to scsi_rescan_device(). Remove the scsi_rescan_device() declaration from the scsi_priv.h header file since it duplicates the declaration in <scsi/scsi_host.h>. Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Cc: Mike Christie <michael.christie@oracle.com> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230822153043.4046244-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-11Merge branch '6.5/scsi-staging' into 6.5/scsi-fixesMartin K. Petersen1-1/+1
Pull in the currently staged SCSI fixes for 6.5. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-06scsi: aacraid: Avoid -Warray-bounds warningArnd Bergmann1-1/+1
The one-element array in aac_aifcmd is actually meant as a flexible array, and causes an overflow warning that can be avoided using the normal flex arrays: drivers/scsi/aacraid/commsup.c:1166:17: error: array index 1 is past the end of the array (that has type 'u8[1]' (aka 'unsigned char[1]'), cast to '__le32 *' (aka 'unsigned int *')) [-Werror,-Warray-bounds] (((__le32 *)aifcmd->data)[1] == cpu_to_le32(3)); ^ ~ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230703114851.1194510-1-arnd@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-28Merge tag 'hardening-v6.5-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "There are three areas of note: A bunch of strlcpy()->strscpy() conversions ended up living in my tree since they were either Acked by maintainers for me to carry, or got ignored for multiple weeks (and were trivial changes). The compiler option '-fstrict-flex-arrays=3' has been enabled globally, and has been in -next for the entire devel cycle. This changes compiler diagnostics (though mainly just -Warray-bounds which is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_ coverage. In other words, there are no new restrictions, just potentially new warnings. Any new FORTIFY warnings we've seen have been fixed (usually in their respective subsystem trees). For more details, see commit df8fc4e934c12b. The under-development compiler attribute __counted_by has been added so that we can start annotating flexible array members with their associated structure member that tracks the count of flexible array elements at run-time. It is possible (likely?) that the exact syntax of the attribute will change before it is finalized, but GCC and Clang are working together to sort it out. Any changes can be made to the macro while we continue to add annotations. As an example of that last case, I have a treewide commit waiting with such annotations found via Coccinelle: https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b Also see commit dd06e72e68bcb4 for more details. Summary: - Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko) - Convert strreplace() to return string start (Andy Shevchenko) - Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook) - Add missing function prototypes seen with W=1 (Arnd Bergmann) - Fix strscpy() kerndoc typo (Arne Welzel) - Replace strlcpy() with strscpy() across many subsystems which were either Acked by respective maintainers or were trivial changes that went ignored for multiple weeks (Azeem Shaikh) - Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers) - Add KUnit tests for strcat()-family - Enable KUnit tests of FORTIFY wrappers under UML - Add more complete FORTIFY protections for strlcat() - Add missed disabling of FORTIFY for all arch purgatories. - Enable -fstrict-flex-arrays=3 globally - Tightening UBSAN_BOUNDS when using GCC - Improve checkpatch to check for strcpy, strncpy, and fake flex arrays - Improve use of const variables in FORTIFY - Add requested struct_size_t() helper for types not pointers - Add __counted_by macro for annotating flexible array size members" * tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits) netfilter: ipset: Replace strlcpy with strscpy uml: Replace strlcpy with strscpy um: Use HOST_DIR for mrproper kallsyms: Replace all non-returning strlcpy with strscpy sh: Replace all non-returning strlcpy with strscpy of/flattree: Replace all non-returning strlcpy with strscpy sparc64: Replace all non-returning strlcpy with strscpy Hexagon: Replace all non-returning strlcpy with strscpy kobject: Use return value of strreplace() lib/string_helpers: Change returned value of the strreplace() jbd2: Avoid printing outside the boundary of the buffer checkpatch: Check for 0-length and 1-element arrays riscv/purgatory: Do not use fortified string functions s390/purgatory: Do not use fortified string functions x86/purgatory: Do not use fortified string functions acpi: Replace struct acpi_table_slit 1-element array with flex-array clocksource: Replace all non-returning strlcpy with strscpy string: use __builtin_memcpy() in strlcpy/strlcat staging: most: Replace all non-returning strlcpy with strscpy drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy ...
2023-06-15scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinitySagar Biradar4-3/+43
Fix the I/O hang that arises because of the MSIx vector not having a mapped online CPU upon receiving completion. SCSI cmds take the blk_mq route, which is setup during init. Reserved cmds fetch the vector_no from mq_map after init is complete. Before init, they have to use 0 - as per the norm. Reviewed-by: Gilbert Wu <gilbert.wu@microchip.com> Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20230519230834.27436-1-sagar.biradar@microchip.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-26scsi: aacraid: Replace all non-returning strlcpy with strscpyAzeem Shaikh1-1/+1
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230517143049.1519806-1-azeemshaikh38@gmail.com
2023-03-25Merge patch series "Constify most SCSI host templates"Martin K. Petersen1-1/+1
Bart Van Assche <bvanassche@acm.org> says: It helps humans and the compiler if it is made explicit that SCSI host templates are not modified. Hence this patch series that constifies most SCSI host templates. Please consider this patch series for the next merge window. Link: https://lore.kernel.org/r/20230322195515.1267197-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25scsi: aacraid: Declare SCSI host template constBart Van Assche1-1/+1
Make it explicit that the SCSI host template is not modified. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230322195515.1267197-17-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-10scsi: aacraid: Drop redundant pci_enable_pcie_error_reporting()Bjorn Helgaas1-3/+0
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since commit f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Also remove pci_disable_pcie_error_reporting() from the .error_detected() path, which was added by commit 5c63f7f710bd ("aacraid: Added EEH support") but looks unnecessary. Error reporting will be disabled by the device reset and will be re-enabled by the pci_restore_state() in aac_pci_slot_reset(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230307182842.870378-2-helgaas@kernel.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com> Cc: Tomas Henzl <thenzl@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-09scsi: aacraid: Allocate cmd_priv with scsicmdKees Cook1-2/+3
The aac_priv() helper assumes that the private cmd area immediately follows struct scsi_cmnd. Allocate this space as part of scsicmd, else there is a risk of heap overflow. Seen with GCC 13: ../drivers/scsi/aacraid/aachba.c: In function 'aac_probe_container': ../drivers/scsi/aacraid/aachba.c:841:26: warning: array subscript 16 is outside array bounds of 'void[392]' [-Warray-bounds=] 841 | status = cmd_priv->status; | ^~ In file included from ../include/linux/resource_ext.h:11, from ../include/linux/pci.h:40, from ../drivers/scsi/aacraid/aachba.c:22: In function 'kmalloc', inlined from 'kzalloc' at ../include/linux/slab.h:720:9, inlined from 'aac_probe_container' at ../drivers/scsi/aacraid/aachba.c:821:30: ../include/linux/slab.h:580:24: note: at offset 392 into object of size 392 allocated by 'kmalloc_trace' 580 | return kmalloc_trace( | ^~~~~~~~~~~~~~ 581 | kmalloc_caches[kmalloc_type(flags)][index], | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 582 | flags, size); | ~~~~~~~~~~~~ Fixes: 76a3451b64c6 ("scsi: aacraid: Move the SCSI pointer to private command data") Link: https://lore.kernel.org/r/20230128000409.never.976-kees@kernel.org Cc: Bart Van Assche <bvanassche@acm.org> Cc: Hannes Reinecke <hare@suse.de> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Vegard Nossum <vegard.nossum@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-05Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-1/+1
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi, mpi3mr). The main driver change that might cause issues on down the road is the conversion of some of our oldest surviving drivers to the DMA API (should only affect m68k). The only major core change is the rework of async resume; the rest are either completely trivial or for updating deprecated APIs" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits) scsi: target: Remove XDWRITEREAD emulated support scsi: megaraid: Remove the static variable initialisation scsi: ch: Do not initialise statics to 0 scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot" scsi: target: iscsi: Do not require target authentication scsi: target: iscsi: Allow AuthMethod=None scsi: target: iscsi: Support base64 in CHAP scsi: target: iscsi: Add support for extended CDB AHS scsi: ufs: dt-bindings: Add SC8280XP binding scsi: target: iscsi: Fix clang -Wformat warnings scsi: ufs: core: Read device property for ref clock scsi: libsas: Resume SAS host for phy reset or enable via sysfs scsi: hisi_sas: Modify v3 HW SATA completion error processing scsi: hisi_sas: Relocate DMA unmap of SMP task scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw() scsi: mpi3mr: Delete a stray tab scsi: mpi3mr: Unlock on error path scsi: mpi3mr: Reduce VD queue depth on detecting throttling scsi: mpi3mr: Resource Based Metering ...
2022-07-06blk-mq: Drop 'reserved' arg of busy_tag_iter_fnJohn Garry2-2/+2
We no longer use the 'reserved' arg in busy_tag_iter_fn for any iter function so it may be dropped. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> #nvme Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/1657109034-206040-6-git-send-email-john.garry@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-22scsi: aacraid: Remove redundant "the"Jiang Jian1-1/+1
Remove redundant "the" in comment. Link: https://lore.kernel.org/r/20220621142346.6429-1-jiangjian@cdjrlc.com Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-26scsi: aacraid: Fix undefined behavior due to shift overflowing the constantBorislav Petkov1-1/+1
Fix: drivers/scsi/aacraid/commsup.c: In function ‘aac_handle_sa_aif’: drivers/scsi/aacraid/commsup.c:1983:2: error: case label does not reduce to an integer constant case SA_AIF_BPCFG_CHANGE: ^~~~ See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. Link: https://lore.kernel.org/r/20220405151517.29753-2-bp@alien8.de Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: aacraid: Clean up some inconsistent indentingJiapeng Chong1-1/+1
Eliminate the following smatch warning: drivers/scsi/aacraid/linit.c:867 aac_eh_tmf_hard_reset_fib() warn: inconsistent indenting. Link: https://lore.kernel.org/r/20220309005031.126504-1-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-23scsi: aacraid: Move the SCSI pointer to private command dataBart Van Assche4-36/+54
Set .cmd_size in the SCSI host template instead of using the SCSI pointer from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer from struct scsi_cmnd. Link: https://lore.kernel.org/r/20220218195117.25689-13-bvanassche@acm.org Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-05scsi: aacraid: Fix spelling of "its"Randy Dunlap1-1/+1
Use the possessive "its" instead of the contraction "it's" in user messages. Link: https://lore.kernel.org/r/20211223061119.18304-1-rdunlap@infradead.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-17scsi: aacraid: Switch to attribute groupsBart Van Assche1-17/+21
struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-12-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-17scsi: aacraid: Call scsi_done() directlyBart Van Assche1-5/+11
The aacraid driver invokes scmd->scsi_done(scmd) for two types of SCSI commands: - SCSI commands initialized by the SCSI mid-layer. - SCSI commands initialized by aac_probe_container(). The processing sequence for SCSI commands allocated by aac_probe_container() is as follows: aac_probe_container() -> _aac_probe_container(scmd, aac_probe_container_callback1) -> scmd->SCp.ptr = aac_probe_container_callback1 -> aac_fib_send(..., _aac_probe_container1, scmd) -> fibptr->callback = _aac_probe_container1 -> fibptr->callback_data = scmd fibptr->callback(scmd) -> _aac_probe_container1(scmd, fibptr) [ ... ] -> _aac_probe_container2(scmd, fibptr) -> Call scmd->SCp.ptr == aac_probe_container_callback1 -> scmd->device = NULL; The processing sequence for SCSI commands allocated by the SCSI mid-layer if _aac_probe_container() is called is as follows: aac_queuecommand() -> aac_scsi_cmd() -> _aac_probe_container(scmd, aac_probe_container_callback2) -> scmd->SCp.ptr = aac_probe_container_callback2 -> aac_fib_send(..., _aac_probe_container1, scmd) fibptr->callback(scmd) -> _aac_probe_container1(scmd, fibptr) [ ... ] -> _aac_probe_container2(scmd, fibptr) -> Call scmd->SCp.ptr == aac_probe_container_callback2 Preserve the existing call sequences by calling scsi_done() for commands submitted by the mid-layer or aac_probe_container_scsi_done() for commands submitted by aac_probe_container(). Link: https://lore.kernel.org/r/20211007202923.2174984-17-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-17scsi: aacraid: Introduce aac_scsi_done()Bart Van Assche1-17/+22
This patch does not change any functionality but makes the next patch in this series easier to read. Link: https://lore.kernel.org/r/20211007202923.2174984-16-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-12scsi: aacraid: Use scsi_cmd_to_rq() instead of scsi_cmnd.requestBart Van Assche2-2/+2
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-14-bvanassche@acm.org Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-19scsi: aacraid: Remove an unused includeChristoph Hellwig1-1/+0
flush_kernel_dcache_page() is not used by aacraid, and this header already comes in through the scatterlist/block headers anyway. Link: https://lore.kernel.org/r/20210712060928.4161649-6-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-11scsi: aacraid: Replace one-element array with flexible-array memberGustavo A. R. Silva2-6/+6
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Refactor the code according to the use of a flexible-array member in struct aac_raw_io2 instead of one-element array, and use the struct_size() helper. Also, this helps with the ongoing efforts to enable -Warray-bounds by fixing the following warnings: drivers/scsi/aacraid/aachba.c: In function ‘aac_build_sgraw2’: drivers/scsi/aacraid/aachba.c:3970:18: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 3970 | if (rio2->sge[j].length % (i*PAGE_SIZE)) { | ~~~~~~~~~^~~ drivers/scsi/aacraid/aachba.c:3974:27: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 3974 | nseg_new += (rio2->sge[j].length / (i*PAGE_SIZE)); | ~~~~~~~~~^~~ drivers/scsi/aacraid/aachba.c:4011:28: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 4011 | for (j = 0; j < rio2->sge[i].length / (pages * PAGE_SIZE); ++j) { | ~~~~~~~~~^~~ drivers/scsi/aacraid/aachba.c:4012:24: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 4012 | addr_low = rio2->sge[i].addrLow + j * pages * PAGE_SIZE; | ~~~~~~~~~^~~ drivers/scsi/aacraid/aachba.c:4014:33: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 4014 | sge[pos].addrHigh = rio2->sge[i].addrHigh; | ~~~~~~~~~^~~ drivers/scsi/aacraid/aachba.c:4015:28: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 4015 | if (addr_low < rio2->sge[i].addrLow) | ~~~~~~~~~^~~ [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/lkml/60414244.ur4%2FkI+fBF1ohKZs%25lkp@intel.com/ Link: https://lore.kernel.org/r/20210421185611.GA105224@embeddedor Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Build-tested-by: kernel test robot <lkp@intel.com>
2021-04-29Merge tag 'net-next-5.13' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-16scsi: aacraid: Remove an unused functionBart Van Assche1-5/+0
This was detected by building the kernel with clang and W=1. Link: https://lore.kernel.org/r/20210415220826.29438-7-bvanassche@acm.org Cc: aacraid@microsemi.com Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-31scsi/aacraid: Delete obsolete TODO fileWang Qing1-3/+0
The TODO file here has not been updated from 2.6.12 for more than 15 years. Its existence will mislead developers seeking to view outdated information. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16scsi: aacraid: Fix misspelling of _aac_rx_init()Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/rx.c:544: warning: expecting prototype for aac_rx_init(). Prototype was for _aac_rx_init() instead Link: https://lore.kernel.org/r/20210303144631.3175331-25-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-16scsi: aacraid: Repair formatting issue in aac_handle_sa_aif()'s headerLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/commsup.c:334: warning: expecting prototype for fib_deallocate(). Prototype was for fib_dealloc() instead drivers/scsi/aacraid/commsup.c:1961: warning: expecting prototype for aac_handle_sa_aif Handle a message from the firmware(). Prototype was for aac_handle_sa_aif() instead Link: https://lore.kernel.org/r/20210303144631.3175331-17-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Cc: linux-scsi@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-16scsi: aacraid: Fix incorrect spelling of aac_send_raw_srb()Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/commctrl.c:480: warning: expecting prototype for aac_send_raw_scb(). Prototype was for aac_send_raw_srb() instead Link: https://lore.kernel.org/r/20210303144631.3175331-10-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-16scsi: aacraid: Fix a few incorrectly named functionsLee Jones1-4/+4
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/aachba.c:796: warning: expecting prototype for aac_probe_container(). Prototype was for aac_probe_container_callback1() instead drivers/scsi/aacraid/aachba.c:850: warning: expecting prototype for InqStrCopy(). Prototype was for inqstrcpy() instead drivers/scsi/aacraid/aachba.c:1814: warning: expecting prototype for Process topology change(). Prototype was for aac_get_safw_ciss_luns() instead Link: https://lore.kernel.org/r/20210303144631.3175331-8-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-23scsi: aacraid: Avoid setting message byte on completionHannes Reinecke1-109/+64
The aacraid controller is a RAID controller and the driver will never see any SCSI messages. Plus it's quite pointless to set the message byte if the host byte is already set, as the latter takes precedence during error recovery. Drop the message byte values for the final result. Link: https://lore.kernel.org/r/20210113090500.129644-16-hare@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-02scsi: aacraid: Fix fall-through warnings for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Link: https://lore.kernel.org/r/e4e25e57964a69f7173f868ff93df9d6d08f360f.1605896060.git.gustavoars@kernel.org Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-26scsi: aacraid: Use generic power managementVaibhav Gupta1-26/+7
Drivers should do only device-specific jobs. But in general, drivers using legacy PCI PM framework for .suspend()/.resume() have to manage many PCI PM-related tasks themselves which can be done by PCI Core itself. This brings extra load on the driver and it directly calls PCI helper functions to handle them. Switch to the new generic framework by updating function signatures and define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove unnecessary calls to the PCI Helper functions along with the legacy .suspend & .resume bindings. Link: https://lore.kernel.org/r/20201102164730.324035-6-vaibhavgupta40@gmail.com Acked-by: Balsundar P <balsundar.p@microchip.com> Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-26scsi: aacraid: Drop pci_enable_wake() from .resumeVaibhav Gupta1-1/+0
The driver calls pci_enable_wake(...., false) in aac_resume(), and there is no corresponding pci_enable_wake(...., true) in aac_suspend(). Either it should do enable-wake the device in .suspend() or should not invoke pci_enable_wake() at all. Concluding that this is a bug and PCI core calls pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from aac_resume(). Link: https://lore.kernel.org/r/20201102164730.324035-5-vaibhavgupta40@gmail.com Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-05scsi: aacraid: Improve compat_ioctl handlersArnd Bergmann2-61/+22
The use of compat_alloc_user_space() can be easily replaced by handling compat arguments in the regular handler, and this will make it work for big-endian kernels as well, which at the moment get an invalid indirect pointer argument. Calling aac_ioctl() instead of aac_compat_do_ioctl() means the compat and native code paths behave the same way again, which they stopped when the adapter health check was added only in the native function. Link: https://lore.kernel.org/r/20201030164450.1253641-1-arnd@kernel.org Fixes: 572ee53a9bad ("scsi: aacraid: check adapter health") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-15Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds4-21/+23
Pull SCSI updates from James Bottomley: "The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes. There are only three core changes: adding sense codes, cleaning up noretry and adding an option for limitless retries" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits) scsi: hisi_sas: Recover PHY state according to the status before reset scsi: hisi_sas: Filter out new PHY up events during suspend scsi: hisi_sas: Add device link between SCSI devices and hisi_hba scsi: hisi_sas: Add check for methods _PS0 and _PR0 scsi: hisi_sas: Add controller runtime PM support for v3 hw scsi: hisi_sas: Switch to new framework to support suspend and resume scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq() scsi: qedf: Remove redundant assignment to variable 'rc' scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store() scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed scsi: sun_esp: Use module_platform_driver to simplify the code scsi: sun3x_esp: Use module_platform_driver to simplify the code scsi: sni_53c710: Use module_platform_driver to simplify the code scsi: qlogicpti: Use module_platform_driver to simplify the code scsi: mac_esp: Use module_platform_driver to simplify the code scsi: jazz_esp: Use module_platform_driver to simplify the code scsi: mvumi: Fix error return in mvumi_io_attach() scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req() scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs() ...
2020-10-03scsi: aacraid: Add a missing iounmap callTomas Henzl1-0/+1
Add a missing resource cleanup in _aac_reset_adapter. Link: https://lore.kernel.org/r/20200926150015.6187-1-thenzl@redhat.com Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-16scsi: aacraid: Make some symbols static in aachba.cJason Yan1-3/+3
This eliminates the following sparse warning: drivers/scsi/aacraid/aachba.c:245:5: warning: symbol 'aac_convert_sgl' was not declared. Should it be static? drivers/scsi/aacraid/aachba.c:293:5: warning: symbol 'acbsize' was not declared. Should it be static? drivers/scsi/aacraid/aachba.c:324:5: warning: symbol 'aac_wwn' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200912033749.142488-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: aacraid: Remove erroneous fallthrough annotationDan Carpenter1-1/+0
This fallthrough annotation is unreachable so we can delete it. Link: https://lore.kernel.org/r/20200825112003.GD285523@mwanda Fixes: c4e2fbca374b ("scsi: aacraid: Reworked scsi command submission path") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-25scsi: aacraid: Remove pci-dma-compat wrapper APISuraj Upadhyay4-17/+19
The legacy API wrappers in include/linux/pci-dma-compat.h should go away as they create unnecessary midlayering for include/linux/dma-mapping.h API. Instead use dma-mapping.h API directly. The patch has been generated with the coccinelle script below. Compile-tested. @@@@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@@@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@@@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@@@ - PCI_DMA_NONE + DMA_NONE @@ expression E1, E2, E3; @@ - pci_alloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_) @@ expression E1, E2, E3; @@ - pci_zalloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_) @@ expression E1, E2, E3, E4; @@ - pci_free_consistent(E1, E2, E3, E4) + dma_free_coherent(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_map_single(E1, E2, E3, E4) + dma_map_single(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_single(E1, E2, E3, E4) + dma_unmap_single(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4, E5; @@ - pci_map_page(E1, E2, E3, E4, E5) + dma_map_page(&E1->dev, E2, E3, E4, E5) @@ expression E1, E2, E3, E4; @@ - pci_unmap_page(E1, E2, E3, E4) + dma_unmap_page(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_map_sg(E1, E2, E3, E4) + dma_map_sg(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_sg(E1, E2, E3, E4) + dma_unmap_sg(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_cpu(E1, E2, E3, E4) + dma_sync_single_for_cpu(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_device(E1, E2, E3, E4) + dma_sync_single_for_device(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_cpu(E1, E2, E3, E4) + dma_sync_sg_for_cpu(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_device(E1, E2, E3, E4) + dma_sync_sg_for_device(&E1->dev, E2, E3, E4) @@ expression E1, E2; @@ - pci_dma_mapping_error(E1, E2) + dma_mapping_error(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_consistent_dma_mask(E1, E2) + dma_set_coherent_mask(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_dma_mask(E1, E2) + dma_set_mask(&E1->dev, E2) Link: https://lore.kernel.org/r/f8d4778440d55ba26c04eef0f7d63fb211a39443.1596045683.git.usuraj35@gmail.com Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva3-6/+6
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-08Merge tag 'pci-v5.9-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Fix pci_cfg_wait queue locking problem (Bjorn Helgaas) - Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi Saheed) - Align PCIe capability and PCI accessor return values (Bolarinwa Olayemi Saheed) - Fix pci_create_slot() reference count leak (Qiushi Wu) - Announce device after early fixups (Tiezhu Yang) PCI device hotplug: - Make rpadlpar functions static (Wei Yongjun) Driver binding: - Add device even if driver attach failed (Rajat Jain) Virtualization: - xen: Remove redundant initialization of irq (Colin Ian King) IOMMU: - Add pci_pri_supported() to check device or associated PF (Ashok Raj) - Release IVRS table in AMD ACS quirk (Hanjun Guo) - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng) - Treat "external-facing" devices themselves as internal (Rajat Jain) MSI: - Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr Stankiewicz) Error handling: - Clear PCIe Device Status errors only if OS owns AER (Jonathan Cameron) - Log correctable errors as warning, not error (Matt Jolly) - Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc Van Oostenryck) Peer-to-peer DMA: - Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe) ASPM: - Add missing newline in sysfs 'policy' (Xiongfeng Wang) Native PCIe controllers: - Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng) - Convert to devm_platform_ioremap_resource() (Dejin Zheng) - Remove duplicate error message from devm_pci_remap_cfg_resource() callers (Dejin Zheng) - Fix runtime PM imbalance on error (Dinghao Liu) - Remove dev_err() when handing an error from platform_get_irq() (Krzysztof Wilczyński) - Use pci_host_bridge.windows list directly instead of splicing in a temporary list for cadence, mvebu, host-common (Rob Herring) - Use pci_host_probe() instead of open-coding all the pieces for altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3, versatile, xgene, xilinx, xilinx-nwl (Rob Herring) - Default host bridge parent device to the platform device (Rob Herring) - Use pci_is_root_bus() instead of tracking root bus number separately in aardvark, designware (imx6, keystone, designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob Herring) - Set host bridge bus number in pci_scan_root_bus_bridge() instead of each driver for aardvark, designware-host, host-common, mediatek, rcar, tegra, v3-semi (Rob Herring) - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob Herring) - Set bridge map_irq and swizzle_irq to default functions; drivers that don't support legacy IRQs (iproc) need to undo this (Rob Herring) ARM Versatile PCIe controller driver: - Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring) Cadence PCIe controller driver: - Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property (Kishon Vijay Abraham I) - Remove "mem" from reg binding (Kishon Vijay Abraham I) - Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I) - Convert all r/w accessors to perform only 32-bit accesses (Kishon Vijay Abraham I) - Add support to start link and verify link status (Kishon Vijay Abraham I) - Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I) - Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I) - Fix updating Vendor ID and Subsystem Vendor ID register (Kishon Vijay Abraham I) - Use bridge resources for outbound window setup (Rob Herring) - Remove private bus number and range storage (Rob Herring) Cadence PCIe endpoint driver: - Add MSI-X support (Alan Douglas) HiSilicon PCIe controller driver: - Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring) Intel VMD host bridge driver: - Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick) Loongson PCIe controller driver: - Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang) Marvell Aardvark PCIe controller driver: - Indicate error in 'val' when config read fails (Pali Rohár) - Don't touch PCIe registers if no card connected (Pali Rohár) Marvell MVEBU PCIe controller driver: - Setup BAR0 in order to fix MSI (Shmuel Hazan) Microsoft Hyper-V host bridge driver: - Fix a timing issue which causes kdump to fail occasionally (Wei Hu) - Make some functions static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Revert tegra124 raw_violation_fixup (Nicolas Chauvet) - Remove PLL power supplies (Thierry Reding) Qualcomm PCIe controller driver: - Change duplicate PCI reset to phy reset (Abhishek Sahu) - Add missing ipq806x clocks in PCIe driver (Ansuel Smith) - Add missing reset for ipq806x (Ansuel Smith) - Add ext reset (Ansuel Smith) - Use bulk clk API and assert on error (Ansuel Smith) - Add support for tx term offset for rev 2.1.0 (Ansuel Smith) - Define some PARF params needed for ipq8064 SoC (Ansuel Smith) - Add ipq8064 rev2 variant (Ansuel Smith) - Support PCI speed set for ipq806x (Sham Muthayyan) Renesas R-Car PCIe controller driver: - Use devm_pci_alloc_host_bridge() (Rob Herring) - Use struct pci_host_bridge.windows list directly (Rob Herring) - Convert rcar-gen2 to use modern host bridge probe functions (Rob Herring) TI J721E PCIe driver: - Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I) Xilinx Versal CPM PCIe controller driver: - Add Versal CPM Root Port driver and YAML schema (Bharat Kumar Gogada) MicroSemi Switchtec management driver: - Add missing __iomem and __user tags to fix sparse warnings (Logan Gunthorpe) Miscellaneous: - Replace http:// links with https:// (Alexander A. Klimov) - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn Helgaas) - Remove unused pci_lost_interrupt() (Heiner Kallweit) - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen) - Fix kerneldoc warnings (Krzysztof Kozlowski)" * tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: Fix kerneldoc warnings PCI: xilinx-cpm: Add Versal CPM Root Port driver PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port PCI: Set bridge map_irq and swizzle_irq to default functions PCI: Move DT resource setup into devm_pci_alloc_host_bridge() PCI: rcar-gen2: Convert to use modern host bridge probe functions PCI: Remove dev_err() when handing an error from platform_get_irq() MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe misc: pci_endpoint_test: Add J721E in pci_device_id table PCI: j721e: Add TI J721E PCIe driver PCI: switchtec: Add missing __iomem tag to fix sparse warnings PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings PCI: rpadlpar: Make functions static PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs PCI: Release IVRS table in AMD ACS quirk PCI: Announce device after early fixups PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken PCI: Remove unused pci_lost_interrupt() dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC ...
2020-07-25scsi: aacraid: Add descriptions for missing parametersLee Jones1-1/+12
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p2' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p3' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p4' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p5' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p6' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'status' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r1' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r2' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r3' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r4' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Excess function parameter 'ret' description in 'src_sync_cmd' drivers/scsi/aacraid/src.c:609: warning: Function parameter or member 'dev' not described in 'aac_src_ioremap' drivers/scsi/aacraid/src.c:639: warning: Function parameter or member 'dev' not described in 'aac_srcv_ioremap' Link: https://lore.kernel.org/r/20200721164148.2617584-8-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-25scsi: aacraid: Add missing description for 'dev'Lee Jones1-0/+1
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/nark.c:31: warning: Function parameter or member 'dev' not described in 'aac_nark_ioremap' Link: https://lore.kernel.org/r/20200721164148.2617584-6-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-25scsi: aacraid: Add missing description for 'dev'Lee Jones1-2/+3
And clean-up a couple of whitespace issues while we're here. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/rkt.c:64: warning: Function parameter or member 'dev' not described in 'aac_rkt_ioremap' Link: https://lore.kernel.org/r/20200721164148.2617584-5-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-25scsi: aacraid: Add descriptions for missing parametersLee Jones1-5/+14
Also clean-up some white space issues while we're here. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'p2' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'p3' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'p4' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'p5' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'p6' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'r1' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'r2' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'r3' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'r4' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:290: warning: Function parameter or member 'dev' not described in 'aac_sa_ioremap' Link: https://lore.kernel.org/r/20200721164148.2617584-4-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-08 18:33:44 +0300