summaryrefslogtreecommitdiff
path: root/drivers/scsi/BusLogic.c
AgeCommit message (Collapse)AuthorFilesLines
2015-02-02scsi: replace seq_printf with seq_putsRasmus Villemoes1-5/+5
Using seq_printf to print a simple string is a lot more expensive than it needs to be, since seq_puts exists. Replace seq_printf with seq_puts when possible. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24scsi: drop reason argument from ->change_queue_depthChristoph Hellwig1-2/+2
Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: don't set tagging state from scsi_adjust_queue_depthChristoph Hellwig1-2/+2
Remove the tagged argument from scsi_adjust_queue_depth, and just let it handle the queue depth. For most drivers those two are fairly separate, given that most modern drivers don't care about the SCSI "tagged" status of a command at all, and many old drivers allow queuing of multiple untagged commands in the driver. Instead we start out with the ->simple_tags flag set before calling ->slave_configure, which is how all drivers actually looking at ->simple_tags except for one worke anyway. The one other case looks broken, but I've kept the behavior as-is for now. Except for that we only change ->simple_tags from the ->change_queue_type, and when rejecting a tag message in a single driver, so keeping this churn out of scsi_adjust_queue_depth is a clear win. Now that the usage of scsi_adjust_queue_depth is more obvious we can also remove all the trivial instances in ->slave_alloc or ->slave_configure that just set it to the cmd_per_lun default. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine1-1/+1
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-10-25[SCSI] buslogic: Added check for DMA mapping errorsKhalid Aziz1-13/+23
Added check for DMA mapping errors for request sense data buffer. Checking for mapping error can avoid potential wild writes. This patch was prompted by the warning from dma_unmap when kernel is compiled with CONFIG_DMA_API_DEBUG. Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com> Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-16[SCSI] BusLogic: Fix an oops when intializing multimaster adapterKhalid Aziz1-8/+8
This fixes an oops caused by buslogic driver when initializing a BusLogic MultiMaster adapter. Initialization code used scope of a variable incorrectly which created a NULL pointer. Oops message is below: BUG: unable to handle kernel NULL pointer dereference at 0000000c IP: [<c150c137>] blogic_init_mm_probeinfo.isra.17+0x20a/0x583 *pde = 00000000 Oops: 002 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.11.1.puz1 #1 Hardware name: /Canterwood, BIOS 6.00 PG 05/16/2003 task: f7050000 ti: f7054000 task.ti: f7054000 EIP: 0060:[<c150c137>] EFLAGS: 00010246 CPU:1 EIP is at blogic_init_mm_probeinfo.isra.17+0x20a/0x583 EAX: 00000013 EBX: 00000000 ECX: 00000000 EDX: f8001000 ESI: f71cb800 EDI: f7388000 EBP: 00007800 ESP: f7055c84 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: 0000000c CR3: 0154f000 CR4: 000007d0 Stack: 0000001c 00000000 c11a59f6 f7055c98 00008130 ffffffff ffffffff 00000000 00000003 00000000 00000000 00000000 00000013 f8001000 00000001 000003d0 00000000 00000000 00000000 c14e3f84 f78803c8 00000000 f738c000 000000e9 Call Trace: [<c11a59f6>] ? pci_get_subsys+0x33/0x38 [<c150c4fb>] ? blogic_init_probeinfo_list+0x4b/0x19e [<c108d593>] ? __alloc_pages_nodemask+0xe3/0x623 [<c108d593>] ? __alloc_pages_nodemask+0xe3/0x623 [<c10fb99e>] ? sysfs_link_sibling+0x61/0x8d [<c10b0519>] ? kmem_cache_alloc+0x8b/0xb5 [<c150cce5>] ? blogic_init+0xa1/0x10e8 [<c10fc0a8>] ? sysfs_add_one+0x10/0x9d [<c10fc18a>] ? sysfs_addrm_finish+0x12/0x85 [<c10fca37>] ? sysfs_do_create_link_sd+0x9d/0x1b4 [<c117c272>] ? blk_register_queue+0x69/0xb3 [<c10fcb68>] ? sysfs_create_link+0x1a/0x2c [<c1181a07>] ? add_disk+0x1a1/0x3c7 [<c138737b>] ? klist_next+0x60/0xc3 [<c122cc3a>] ? scsi_dh_detach+0x68/0x68 [<c1213e36>] ? bus_for_each_dev+0x51/0x61 [<c1000356>] ? do_one_initcall+0x22/0x12c [<c10f3688>] ? __proc_create+0x8c/0xba [<c150cc44>] ? blogic_setup+0x5f6/0x5f6 [<c14e94aa>] ? repair_env_string+0xf/0x4d [<c14e949b>] ? do_early_param+0x71/0x71 [<c103efaa>] ? parse_args+0x21f/0x33d [<c14e9a54>] ? kernel_init_freeable+0xdf/0x17d [<c14e949b>] ? do_early_param+0x71/0x71 [<c1388b64>] ? kernel_init+0x8/0xc0 [<c1392222>] ? ret_from_kernel_thread+0x6/0x28 [<c1392227>] ? ret_from_kernel_thread+0x1b/0x28 [<c1388b5c>] ? rest_init+0x6c/0x6c Code: 89 44 24 10 0f b6 44 24 3d 89 44 24 0c c7 44 24 08 00 00 00 00 c7 44 24 04 38 62 46 c1 c7 04 24 02 00 00 00 e8 78 13 d2 ff 31 db <89> 6b 0c b0 20 89 ea ee c7 44 24 08 04 00 00 00 8d 44 24 4c 89 EIP: [<c150c137>] blogic_init_mm_probeinfo.isra.17+0x20a/0x583 SS:ESP 0068:f7055c84 CR2: 000000000000000c ---[ end trace 17f45f5196d40487 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com> Cc: <stable@vger.kernel.org> # 3.11.x Reported-by: Pierre Uszynski <pierre@rahul.net> Tested-by: Pierre Uszynski <pierre@rahul.net> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-27[SCSI] BusLogic: Port driver to 64-bit.Khalid Aziz1-6/+5
[jejb: fix up pointer to int cast warning] Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-27[SCSI] BusLogic: Fix style issuesKhalid Aziz1-2090/+2363
Fix CamelCase and extra long lines in the buslogic driver. Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-09BusLogic: switch to ->show_info()Al Viro1-45/+38
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-01-04Drivers: scsi: remove __dev* attributes.Greg Kroah-Hartman1-1/+1
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Adam Radford <linuxraid@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-28Remove all #inclusions of asm/system.hDavid Howells1-1/+0
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2010-11-17SCSI host lock push-downJeff Garzik1-1/+2
Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang1-3/+3
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-07[SCSI] BusLogic: make FlashPoint support x86-32 onlyMatthew Wilcox1-1/+4
We've verified that there are 64 bit and endianness problems in the flashpoint driver. Reverse the logic of CONFIG_OMIT_FLASHPOINT (make it CONFIG_SCSI_FLASHPOINT) and make it depend on X86_32 so it can't appear for any other architectures. Long term, if someone chooses, they could make FlashPoint 64 bit compliant (it looks like its a question of fixing up the sizes in some of the packed descriptors) Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30[SCSI] remove use_sg_chainingJames Bottomley1-1/+0
With the sg table code, every SCSI driver is now either chain capable or broken (or has sg_tablesize set so chaining is never activated), so there's no need to have a check in the host template. Also tidy up the code by moving the scatterlist size defines into the SCSI includes and permit the last entry of the scatterlist pools not to be a power of two. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] replace sizeof sense_buffer with SCSI_SENSE_BUFFERSIZEFUJITA Tomonori1-1/+1
This replaces sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE in several LLDs. It's a preparation for the future changes to remove sense_buffer array in scsi_cmnd structure. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-10-16[SCSI] add use_sg_chaining option to scsi_host_templateFUJITA Tomonori1-0/+1
This option is true if a low-level driver can support sg chaining. This will be removed eventually when all the drivers are converted to support sg chaining. q->max_phys_segments is set to SCSI_MAX_SG_SEGMENTS if false. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-05-27[SCSI] BusLogic: convert to use the data buffer accessorsFUJITA Tomonori1-30/+21
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-18[SCSI] BusLogic: stop using check_regionZachary Amsden1-25/+48
I got so sick of seing the check_region warnings from BusLogic.c I actually fixed it properly. Never use check region, reserve it before the probe with request region instead and check the error result; free region if setup fails. Should be functionally identical to the original except for fixing the potential race. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-08[SCSI] BusLogic: Replace 'boolean' by 'bool'Richard Knutsson1-21/+21
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-04[SCSI] Buslogic: local_irq_disable() is redundant after local_irq_save()Jiri Kosina1-3/+1
drivers/scsi/BusLogic.c::BusLogic_Command() contains local_irq_disable() call after local_irq_save(). This looks redundant. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22Merge ../scsi-rc-fixes-2.6James Bottomley1-0/+11
2006-11-16[SCSI] minor bug fixes and cleanupsJeff Garzik1-6/+6
BusLogic: use kzalloc(), remove cast to/from void* aic7xxx_old: fix typo in cast NCR53c406a: ifdef out static built code fd_mcs: ifdef out static built code ncr53c8xx: ifdef out static built code Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-18[BusLogic] Add pci dev table for auto module loading.Ben Collins1-0/+11
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells1-1/+1
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-24[SCSI] Switch some more scsi drivers to pci_get_device and refcounted pci ↵Alan Cox1-7/+8
structures Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-20[SCSI] BusLogic gcc 4.1 warning fixesDaniel Walker1-9/+37
- Reworked all the very long lines in that block (this drivers full of them though) - Returns an error in three places that it didn't before. - Properly clean up after a scsi_add_host() failure. Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-03[PATCH] irq-flags: scsi: Use the new IRQF_ constantsThomas Gleixner1-1/+1
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel1-1/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-28[PATCH] Replace 0xff.. with correct DMA_xBIT_MASKMatthias Gehre1-3/+4
Replace all occurences of 0xff.. in calls to function pci_set_dma_mask() and pci_set_consistant_dma_mask() with the corresponding DMA_xBIT_MASK from linux/dma-mapping.h. Signed-off-by: Matthias Gehre <M.Gehre@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] drivers/scsi/*: use time_after() and friendsMarcelo Feitoza Parisi1-1/+2
They deal with wrapping correctly and are nicer to read. Signed-off-by: Marcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-13[SCSI] Pass proper device from BusLogic to SCSI layerPetr Vandrovec1-1/+2
While trying to get SUSE's SLES9 working on system with more than 4GB we've noticed that SCSI layer happilly passes addresses over 4GB to the buslogic driver, which is quite a big problem as buslogic can generate only 32bit busmastering cycles. Fortunately in the current kernels this problem does not exist anymore as SCSI layer now assumes 4GB capable device by default, but it is still good idea to pass correct device structure to the SCSI layer. If nothing else, /sys/block/sda/device now points to /sys/devices/pci0000:00/0000:00:10.0/host0/... instead of /sys/devices/platform/host0/... like it did in the past. Change does nothing for ISA based BusLogic adapters, they'll still end under platform (and they are probably broken for long time as I do not see anything forcing ISA 16MB limit for them). Signed-off-by: Petr Vandrovec <petr@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_host_reset_handler()Jeff Garzik1-1/+7
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18[PATCH] scsi: remove meaningless scsi_cmnd->serial_number_at_timeout field1-7/+0
scsi_cmnd->serial_number_at_timeout doesn't serve any purpose anymore. All serial_number == serial_number_at_timeout tests are always true in abort callbacks. Kill the field. Also, as ->pid always equals ->serial_number and ->serial_number doesn't have any special meaning anymore, update comments above ->serial_number accordingly. Once we remove all uses of this field from all lldd's, this field should go. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-17Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+3574
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!