summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2023-08-18s390/vfio-ap: make sure nib is sharedTony Krowiak1-0/+30
Since the NIB is visible by HW, KVM and the (PV) guest it needs to be in non-secure or secure but shared storage. Return code 6 is used to indicate to a PV guest that its NIB would be on secure, unshared storage and therefore the NIB address is invalid. Unfortunately we have no easy way to check if a page is unshared after vfio_pin_pages() since it will automatically export an unshared page if the UV pin shared call did not succeed due to a page being in unshared state. Therefore we use the fact that UV pinning it a second time is a nop but trying to pin an exported page is an error (0x102). If we encounter this error, we do a vfio unpin and import the page again, since vfio_pin_pages() exported it. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-13-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36Tony Krowiak1-1/+12
Check for response codes 0x35 and 0x36 which are asynchronous return codes indicating a failure of the guest to associate a secret with a queue. Since there can be no interaction with this queue from the guest (i.e., the vcpus are out of SIE for hot unplug, the guest is being shut down or an emulated subsystem reset of the guest is taking place), let's go ahead and re-issue the ZAPQ to reset and zeroize the queue. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-10-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: handle queue state change in progress on resetTony Krowiak1-1/+3
A new APQSW response code (0xA) indicating the designated queue is in the process of being bound or associated to a configuration may be returned from the PQAP(ZAPQ) command. This patch introduces code that will verify when the PQAP(ZAPQ) command can be re-issued after receiving response code 0xA. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-9-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: use work struct to verify queue resetTony Krowiak2-25/+25
Instead of waiting to verify that a queue is reset in the vfio_ap_mdev_reset_queue function, let's use a wait queue to check the the state of the reset. This way, when resetting all of the queues assigned to a matrix mdev, we don't have to wait for each queue to be reset before initiating a reset on the next queue to be reset. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Suggested-by: Halil Pasic <pasic@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-8-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: store entire AP queue status word with the queue objectTony Krowiak2-14/+17
Store the entire AP queue status word returned from the ZAPQ command with the struct vfio_ap_queue object instead of just the response code field. The other information contained in the status word is need by the apq_reset_check function to display a proper message to indicate that the vfio_ap driver is waiting for the ZAPQ to complete because the queue is not empty or IRQs are still enabled. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-7-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: remove upper limit on wait for queue reset to completeTony Krowiak1-29/+35
The architecture does not define an upper limit on how long a queue reset (RAPQ/ZAPQ) can take to complete. In order to ensure both the security requirements and prevent resource leakage and corruption in the hypervisor, it is necessary to remove the upper limit (200ms) the vfio_ap driver currently waits for a reset to complete. This, of course, may result in a hang which is a less than desirable user experience, but until a firmware solution is provided, this is a necessary evil. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-6-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: allow deconfigured queue to be passed through to a guestTony Krowiak1-2/+4
When a queue is reset, the status response code returned from the reset operation is stored in the reset_rc field of the vfio_ap_queue structure representing the queue being reset. This field is later used to decide whether the queue should be passed through to a guest. If the reset_rc field is a non-zero value, the queue will be filtered from the list of queues passed through. When an adapter is deconfigured, all queues associated with that adapter are reset. That being the case, it is not necessary to filter those queues; so, if the status response code returned from a reset operation indicates the queue is deconfigured, the reset_rc field of the vfio_ap_queue structure will be set to zero so it will be passed through (i.e., not filtered). Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-5-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: wait for response code 05 to clear on queue resetTony Krowiak1-0/+2
Response code 05, AP busy, is a valid response code for a ZAPQ or TAPQ. Instead of returning error -EIO when a ZAPQ fails with response code 05, let's wait until the queue is no longer busy and try the ZAPQ again. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-4-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: clean up irq resources if possibleTony Krowiak1-4/+7
The architecture does not specify whether interrupts are disabled as part of the asynchronous reset or upon return from the PQAP/ZAPQ instruction. If, however, PQAP/ZAPQ completes with APQSW response code 0 and the interrupt bit in the status word is also 0, we know the interrupts are disabled and we can go ahead and clean up the corresponding resources; otherwise, we must wait until the asynchronous reset has completed. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Suggested-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-3-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQTony Krowiak1-11/+2
After a ZAPQ is executed to reset a queue, if the queue is not empty or interrupts are still enabled, the vfio_ap driver will wait for the reset operation to complete by repeatedly executing the TAPQ instruction and checking the 'E' and 'I' bits in the APQSW to verify that the queue is empty and interrupts are disabled. This is unnecessary because it is sufficient to check only the response code in the APQSW. If the reset is still in progress, the response code will be 02; however, if the reset has completed successfully, the response code will be 00. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-2-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/zcrypt_ep11misc: support API ordinal 6 with empty pin-blobHolger Dengler5-25/+76
Secure execution guest environments require an empty pinblob in all key generation and unwrap requests. Empty pinblobs are only available in EP11 API ordinal 6 or higher. Add an empty pinblob to key generation and unwrap requests, if the AP secure binding facility is available. In all other cases, stay with the empty pin tag (no pinblob) and the current API ordinals. The EP11 API ordinal also needs to be considered when the pkey module tries to figure out the list of eligible cards for key operations with protected keys in secure execution environment. These changes are transparent to userspace but required for running an secure execution guest with handling key generate and key derive (e.g. secure key to protected key) correct. Especially using EP11 secure keys with the kernel dm-crypt layer requires this patch. Co-developed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-17s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributesHolger Dengler1-3/+3
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced a new PKEY_TYPE_EP11_AES securekey type as a supplement to the existing PKEY_TYPE_EP11 (which won't work in environments with session-bound keys). The pkey EP11 securekey attributes use PKEY_TYPE_EP11_AES (instead of PKEY_TYPE_EP11) keyblobs, to make the generated keyblobs usable also in environments, where session-bound keys are required. There should be no negative impacts to userspace because the internal structure of the keyblobs is opaque. The increased size of the generated keyblobs is reflected by the changed size of the attributes. Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-17s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTLHolger Dengler1-1/+26
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced a new PKEY_TYPE_EP11_AES type for the PKEY_VERIFYKEY2 IOCTL to verify keyblobs of this type. Unfortunately, all PKEY_VERIFYKEY2 IOCTL requests with keyblobs of this type return with an error (-EINVAL). Fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTL, so that userspace can verify keyblobs of this type. Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-17s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK[23]Holger Dengler3-62/+100
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced a new PKEY_TYPE_EP11_AES type for the PKEY_KBLOB2PROTK2 and a new IOCTL, PKEY_KBLOB2PROTK3, which both allows userspace to convert opaque securekey blobs of this type into protectedkey blobs. Unfortunately, all PKEY_KBLOB2PROTK2 and PKEY_KBLOB2PROTK3 IOCTL requests with this keyblobs of this type return with an error (-EINVAL). Fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK2 and PKEY_KBLOB2PROTK3 IOCTLs, so that userspace can convert PKEY_TYPE_EP11_AES keyblobs into protectedkey blobs. Add a helper function to decode the start and size of the internal header as well as start and size of the keyblob payload of an existing keyblob. Also validate the length of header and keyblob, as well as the keyblob magic. Introduce another helper function, which handles a raw key wrapping request and do the keyblob decoding in the calling function. Remove all other header-related calculations. Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-17s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_CLR2SECK2 IOCTLHolger Dengler3-20/+60
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced PKEY_TYPE_EP11_AES for the PKEY_CLR2SECK2 IOCTL to convert an AES clearkey into a securekey of this type. Unfortunately, all PKEY_CLR2SECK2 IOCTL requests with type PKEY_TYPE_EP11_AES return with an error (-EINVAL). Fix the handling for PKEY_TYPE_EP11_AES in PKEY_CLR2SECK2 IOCTL, so that userspace can convert clearkey blobs into PKEY_TYPE_EP11_AES securekey blobs. Cc: stable@vger.kernel.org # v5.10+ Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-17s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_GENSECK2 IOCTLHolger Dengler3-21/+102
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced PKEY_TYPE_EP11_AES for the PKEY_GENSECK2 IOCTL, to enable userspace to generate securekey blobs of this type. Unfortunately, all PKEY_GENSECK2 IOCTL requests for PKEY_TYPE_EP11_AES return with an error (-EINVAL). Fix the handling for PKEY_TYPE_EP11_AES in PKEY_GENSECK2 IOCTL, so that userspace can generate securekey blobs of this type. The start of the header and the keyblob, as well as the length need special handling, depending on the internal keyversion. Add a helper function that splits an uninitialized buffer into start and size of the header as well as start and size of the payload, depending on the requested keyversion. Do the header-related calculations and the raw genkey request handling in separate functions. Use the raw genkey request function for internal purposes. Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-17s390/pkey: fix/harmonize internal keyblob headersHolger Dengler3-11/+4
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced PKEY_TYPE_EP11_AES as a supplement to PKEY_TYPE_EP11. All pkeys have an internal header/payload structure, which is opaque to the userspace. The header structures for PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES are nearly identical and there is no reason, why different structures are used. In preparation to fix the keyversion handling in the broken PKEY IOCTLs, the same header structure is used for PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES. This reduces the number of different code paths and increases the readability. Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-16s390/dcssblk: fix kernel crash with list_add corruptionGerald Schaefer1-1/+3
Commit fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk association") introduced new logic for gendisk association, requiring drivers to explicitly call dax_add_host() and dax_remove_host(). For dcssblk driver, some dax_remove_host() calls were missing, e.g. in device remove path. The commit also broke error handling for out_dax case in device add path, resulting in an extra put_device() w/o the previous get_device() in that case. This lead to stale xarray entries after device add / remove cycles. In the case when a previously used struct gendisk pointer (xarray index) would be used again, because blk_alloc_disk() happened to return such a pointer, the xa_insert() in dax_add_host() would fail and go to out_dax, doing the extra put_device() in the error path. In combination with an already flawed error handling in dcssblk (device_register() cleanup), which needs to be addressed in a separate patch, this resulted in a missing device_del() / klist_del(), and eventually in the kernel crash with list_add corruption on a subsequent device_add() / klist_add(). Fix this by adding the missing dax_remove_host() calls, and also move the put_device() in the error path to restore the previous logic. Fixes: fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk association") Cc: <stable@vger.kernel.org> # 5.17+ Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-16s390/mm: make virt_to_pfn() a static inlineLinus Walleij2-2/+2
Making virt_to_pfn() a static inline taking a strongly typed (const void *) makes the contract of a passing a pointer of that type to the function explicit and exposes any misuse of the macro virt_to_pfn() acting polymorphic and accepting many types such as (void *), (unitptr_t) or (unsigned long) as arguments without warnings. For symmetry do the same with pfn_to_virt() reflecting the current layout in asm-generic/page.h. Doing this reveals a number of offenders in the arch code and the S390-specific drivers, so just bite the bullet and fix up all of those as well. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/r/20230812-virt-to-phys-s390-v2-1-6c40f31fe36f@linaro.org Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-11tty: make tty_operations::write()'s count size_tJiri Slaby (SUSE)4-6/+8
Unify with the rest of the code. Use size_t for counts and ssize_t for retval. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230810091510.13006-30-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11tty: propagate u8 data to tty_operations::put_char()Jiri Slaby (SUSE)4-6/+6
Data are now typed as u8. Propagate this change to tty_operations::put_char(). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Mathias Nyman <mathias.nyman@intel.com> Link: https://lore.kernel.org/r/20230810091510.13006-29-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11tty: propagate u8 data to tty_operations::write()Jiri Slaby (SUSE)4-6/+4
Data are now typed as u8. Propagate this change to tty_operations::write(). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Scott Branden <scott.branden@broadcom.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: David Lin <dtwlin@gmail.com> Cc: Johan Hovold <johan@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Cc: Oliver Neukum <oneukum@suse.com> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Link: https://lore.kernel.org/r/20230810091510.13006-28-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski8-93/+63
Cross-merge networking fixes after downstream PR. Conflicts: net/dsa/port.c 9945c1fb03a3 ("net: dsa: fix older DSA drivers using phylink") a88dd7538461 ("net: dsa: remove legacy_pre_march2020 detection") https://lore.kernel.org/all/20230731102254.2c9868ca@canb.auug.org.au/ net/xdp/xsk.c 3c5b4d69c358 ("net: annotate data-races around sk->sk_mark") b7f72a30e9ac ("xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path") https://lore.kernel.org/all/20230731102631.39988412@canb.auug.org.au/ drivers/net/ethernet/broadcom/bnxt/bnxt.c 37b61cda9c16 ("bnxt: don't handle XDP in netpoll") 2b56b3d99241 ("eth: bnxt: handle invalid Tx completions more gracefully") https://lore.kernel.org/all/20230801101708.1dc7faac@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c 62da08331f1a ("net/mlx5e: Set proper IPsec source port in L4 selector") fbd517549c32 ("net/mlx5e: Add function to get IPsec offload namespace") drivers/net/ethernet/sfc/selftest.c 55c1528f9b97 ("sfc: fix field-spanning memcpy in selftest") ae9d445cd41f ("sfc: Miscellaneous comment removals") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-04Merge tag 'net-6.5-rc5' of ↵Linus Torvalds4-9/+11
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and wireless. Nothing scary here. Feels like the first wave of regressions from v6.5 is addressed - one outstanding fix still to come in TLS for the sendpage rework. Current release - regressions: - udp: fix __ip_append_data()'s handling of MSG_SPLICE_PAGES - dsa: fix older DSA drivers using phylink Previous releases - regressions: - gro: fix misuse of CB in udp socket lookup - mlx5: unregister devlink params in case interface is down - Revert "wifi: ath11k: Enable threaded NAPI" Previous releases - always broken: - sched: cls_u32: fix match key mis-addressing - sched: bind logic fixes for cls_fw, cls_u32 and cls_route - add bound checks to a number of places which hand-parse netlink - bpf: disable preemption in perf_event_output helpers code - qed: fix scheduling in a tasklet while getting stats - avoid using APIs which are not hardirq-safe in couple of drivers, when we may be in a hard IRQ (netconsole) - wifi: cfg80211: fix return value in scan logic, avoid page allocator warning - wifi: mt76: mt7615: do not advertise 5 GHz on first PHY of MT7615D (DBDC) Misc: - drop handful of inactive maintainers, put some new in place" * tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (98 commits) MAINTAINERS: update TUN/TAP maintainers test/vsock: remove vsock_perf executable on `make clean` tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen tcp_metrics: annotate data-races around tm->tcpm_net tcp_metrics: annotate data-races around tm->tcpm_vals[] tcp_metrics: annotate data-races around tm->tcpm_lock tcp_metrics: annotate data-races around tm->tcpm_stamp tcp_metrics: fix addr_same() helper prestera: fix fallback to previous version on same major version udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES net/mlx5e: Set proper IPsec source port in L4 selector net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio net/mlx5: fs_core: Make find_closest_ft more generic wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1() vxlan: Fix nexthop hash size ip6mr: Fix skb_under_panic in ip6mr_cache_report() s390/qeth: Don't call dev_close/dev_open (DOWN/UP) net: tap_open(): set sk_uid from current_fsuid() net: tun_chr_open(): set sk_uid from current_fsuid() net: dcb: choose correct policy to parse DCB_ATTR_BCN ...
2023-08-02Merge tag 'scsi-fixes' of ↵Linus Torvalds1-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three small fixes, all in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: pm80xx: Fix error return code in pm8001_pci_probe() scsi: zfcp: Defer fc_rport blocking until after ADISC response scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices
2023-08-02s390/qeth: Don't call dev_close/dev_open (DOWN/UP)Alexandra Winter4-9/+11
dev_close() and dev_open() are issued to change the interface state to DOWN or UP (dev->flags IFF_UP). When the netdev is set DOWN it loses e.g its Ipv6 addresses and routes. We don't want this in cases of device recovery (triggered by hardware or software) or when the qeth device is set offline. Setting a qeth device offline or online and device recovery actions call netif_device_detach() and/or netif_device_attach(). That will reset or set the LOWER_UP indication i.e. change the dev->state Bit __LINK_STATE_PRESENT. That is enough to e.g. cause bond failovers, and still preserves the interface settings that are handled by the network stack. Don't call dev_open() nor dev_close() from the qeth device driver. Let the network stack handle this. Fixes: d4560150cb47 ("s390/qeth: call dev_close() during recovery") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-28Merge tag 'block-6.5-2023-07-28' of git://git.kernel.dk/linuxLinus Torvalds3-79/+51
Pull block fixes from Jens Axboe: "A few fixes that should go into the current kernel release, mainly: - Set of fixes for dasd (Stefan) - Handle interruptible waits returning because of a signal for ublk (Ming)" * tag 'block-6.5-2023-07-28' of git://git.kernel.dk/linux: ublk: return -EINTR if breaking from waiting for existed users in DEL_DEV ublk: fail to recover device if queue setup is interrupted ublk: fail to start device if queue setup is interrupted block: Fix a source code comment in include/uapi/linux/blkzoned.h s390/dasd: print copy pair message only for the correct error s390/dasd: fix hanging device after request requeue s390/dasd: use correct number of retries for ERP requests s390/dasd: fix hanging device after quiesce/resume
2023-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-11/+24
Cross-merge networking fixes after downstream PR. No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26s390/lcs: Remove FDDI optionAlexandra Winter2-36/+8
The last s390 machine that supported FDDI was z900 ('7th generation', released in 2000). The oldest machine generation currently supported by the Linux kernel is MARCH_Z10 (released 2008). If there is still a usecase for connecting a Linux on s390 instance to a LAN Channel Station (LCS), it can only do so via Ethernet. Randy Dunlap[1] found that LCS over FDDI has never worked, when FDDI was compiled as module. Instead of fixing that, remove the FDDI option from the lcs driver. While at it, make the CONFIG_LCS description a bit more helpful. References: [1] https://lore.kernel.org/netdev/20230621213742.8245-1-rdunlap@infradead.org/ Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230724131546.3597001-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26scsi: zfcp: Defer fc_rport blocking until after ADISC responseSteffen Maier1-5/+1
Storage devices are free to send RSCNs, e.g. for internal state changes. If this happens on all connected paths, zfcp risks temporarily losing all paths at the same time. This has strong requirements on multipath configuration such as "no_path_retry queue". Avoid such situations by deferring fc_rport blocking until after the ADISC response, when any actual state change of the remote port became clear. The already existing port recovery triggers explicitly block the fc_rport. The triggers are: on ADISC reject or timeout (typical cable pull case), and on ADISC indicating that the remote port has changed its WWPN or the port is meanwhile no longer open. As a side effect, this also removes a confusing direct function call to another work item function zfcp_scsi_rport_work() instead of scheduling that other work item. It was probably done that way to have the rport block side effect immediate and synchronous to the caller. Fixes: a2fa0aede07c ("[SCSI] zfcp: Block FC transport rports early on errors") Cc: stable@vger.kernel.org #v2.6.30+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Link: https://lore.kernel.org/r/20230724145156.3920244-1-maier@linux.ibm.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-25vfio-iommufd: Add detach_ioas support for emulated VFIO devicesYi Liu2-0/+2
This prepares for adding DETACH ioctl for emulated VFIO devices. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-16-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-24s390/dasd: print copy pair message only for the correct errorStefan Haberland1-1/+1
The DASD driver has certain types of requests that might be rejected by the storage server or z/VM because they are not supported. Since the missing support of the command is not a real issue there is no user visible kernel error message for this. For copy pair setups there is a specific error that IO is not allowed on secondary devices. This error case is explicitly handled and an error message is printed. The code checking for the error did use a bitwise 'and' that is used to check for specific bits. But in this case the whole sense byte has to match. This leads to the problem that the copy pair related error message is erroneously printed for other error cases that are usually not reported. This might heavily confuse users and lead to follow on actions that might disrupt application processing. Fix by checking the sense byte for the exact value and not single bits. Cc: stable@vger.kernel.org # 6.1+ Fixes: 1fca631a1185 ("s390/dasd: suppress generic error messages for PPRC secondary devices") Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20230721193647.3889634-5-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24s390/dasd: fix hanging device after request requeueStefan Haberland1-77/+48
The DASD device driver has a function to requeue requests to the blocklayer. This function is used in various cases when basic settings for the device have to be changed like High Performance Ficon related parameters or copy pair settings. The functions iterates over the device->ccw_queue and also removes the requests from the block->ccw_queue. In case the device is started on an alias device instead of the base device it might be removed from the block->ccw_queue without having it canceled properly before. This might lead to a hanging device since the request is no longer on a queue and can not be handled properly. Fix by iterating over the block->ccw_queue instead of the device->ccw_queue. This will take care of all blocklayer related requests and handle them on all associated DASD devices. Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20230721193647.3889634-4-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24s390/dasd: use correct number of retries for ERP requestsStefan Haberland1-1/+1
If a DASD request fails an error recovery procedure (ERP) request might be built as a copy of the original request to do error recovery. The ERP request gets a number of retries assigned. This number is always 256 no matter what other value might have been set for the original request. This is not what is expected when a user specifies a certain amount of retries for the device via sysfs. Correctly use the number of retries of the original request for ERP requests. Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20230721193647.3889634-3-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24s390/dasd: fix hanging device after quiesce/resumeStefan Haberland1-0/+1
Quiesce and resume are functions that tell the DASD driver to stop/resume issuing I/Os to a specific DASD. On resume dasd_schedule_block_bh() is called to kick handling of IO requests again. This does unfortunately not cover internal requests which are used for path verification for example. This could lead to a hanging device when a path event or anything else that triggers internal requests occurs on a quiesced device. Fix by also calling dasd_schedule_device_bh() which triggers handling of internal requests on resume. Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Cc: stable@vger.kernel.org Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20230721193647.3889634-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24docs: move s390 under archCosta Shulyupin1-1/+1
and fix all in-tree references. Architecture-specific documentation is being moved into Documentation/arch/ as a way of cleaning up the top-level documentation directory and making the docs hierarchy more closely match the source hierarchy. Signed-off-by: Costa Shulyupin <costa.shul@redhat.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230718045550.495428-1-costa.shul@redhat.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-07-24s390/mm: remove redundant check against VMEM_MAX_PHYSAlexander Gordeev1-4/+0
The value of ident_map_size could never exceed the value of vmemmap as secured by setup_kernel_memory_layout() function: /* make sure identity map doesn't overlay with vmemmap */ ident_map_size = min(ident_map_size, vmemmap_start); Since VMEM_MAX_PHYS macro is set to vmemmap and a newly added range is checked against ident_map_size in add_memory_merged() function anyway, the check against VMEM_MAX_PHYS is redundant. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-07-24s390/dcssblk: fix virtual vs physical address confusionAlexander Gordeev1-10/+7
Fix virtual vs physical address confusion (which currently are the same). Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-07-24s390/dcssblk: use IS_ALIGNED() for alignment checksAlexander Gordeev1-3/+4
Use IS_ALIGNED() instead of cumbersome bit manipulations. Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-07-24s390/zcrypt: remove CEX2 and CEX3 device driversHarald Freudenberger11-935/+39
Remove the legacy device driver code for CEX2 and CEX3 cards. The last machines which are able to handle CEX2 crypto cards are z10 EC first available 2008 and z10 BC first available 2009. The last machines able to handle a CEX3 crypto card are z196 first available 2010 and z114 first available 2011. Please note that this does not imply to drop CEX2 and CEX3 support in general. With older kernels on hardware up to the aforementioned machine models these crypto cards will get support by IBM. The removal of the CEX2 and CEX3 device drivers code opens up some simplifications, for example support for crypto cards without rng support can be removed also. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-07-24s390: add support for user-defined certificatesAnastasia Eskova1-0/+1
Enable receiving the user-defined certificates from the s390x hypervisor via new diagnose 0x320 calls, and make them available to the Linux root user as 'cert_store_key' type keys in a so-called 'cert_store' keyring. New user-space interfaces: /sys/firmware/cert_store/refresh Writing to this attribute re-fetches certificates via DIAG 0x320 /sys/firmware/cert_store/cs_status Reading from this attribute returns either of: "uninitialized" If no certificate has been retrieved yet "ok" If certificates have been successfully retrieved "failed (<number>)" If certificate retrieval failed with reason code <number> New debug trace areas: /sys/kernel/debug/s390dbf/cert_store_msg /sys/kernel/debug/s390dbf/cert_store_hexdump Usage example: To initiate request for certificates available to the system as root: $ echo 1 > /sys/firmware/cert_store/refresh Upon success the '/sys/firmware/cert_store/cs_status' contains the value 'ok'. $ cat /sys/firmware/cert_store/cs_status ok Get the ID of the keyring 'cert_store': $ keyctl search @us keyring cert_store OR $ keyctl link @us @s; keyctl request keyring cert_store Obtain list of IDs of certificates: $ keyctl rlist <cert_store keyring ID> Display certificate content as hex-dump: $ keyctl read <certificate ID> Read certificate contents as binary data: $ keyctl pipe <certificate ID> >cert_data Display certificate description: $ keyctl describe <certificate ID> The certificate description has the following format: <64 bytes certificate name in EBCDIC> ':' <certificate index as obtained from hypervisor> ':' <certificate store token obtained from hypervisor> The certificate description in /proc/keys has certificate name represented in ASCII. Users can read but cannot update the content of the certificate. Signed-off-by: Anastasia Eskova <anastasia.eskova@ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-07-20s390/zcrypt: fix reply buffer calculations for CCA repliesHarald Freudenberger1-11/+24
The length information for available buffer space for CCA replies is covered with two fields in the T6 header prepended on each CCA reply: fromcardlen1 and fromcardlen2. The sum of these both values must not exceed the AP bus limit for this card (24KB for CEX8, 12KB CEX7 and older) minus the always present headers. The current code adjusted the fromcardlen2 value in case of exceeding the AP bus limit when there was a non-zero value given from userspace. Some tests now showed that this was the wrong assumption. Instead the userspace value given for this field should always be trusted and if the sum of the two fields exceeds the AP bus limit for this card the first field fromcardlen1 should be adjusted instead. So now the calculation is done with this new insight in mind. Also some additional checks for overflow have been introduced and some comments to provide some documentation for future maintainers of this complicated calculation code. Furthermore the 128 bytes of fix overhead which is used in the current code is not correct. Investigations showed that for a reply always the same two header structs are prepended before a possible payload. So this is also fixed with this patch. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-07-14Merge tag 'net-6.5-rc2' of ↵Linus Torvalds1-73/+66
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter, wireless and ebpf. Current release - regressions: - netfilter: conntrack: gre: don't set assured flag for clash entries - wifi: iwlwifi: remove 'use_tfh' config to fix crash Previous releases - regressions: - ipv6: fix a potential refcount underflow for idev - icmp6: ifix null-ptr-deref of ip6_null_entry->rt6i_idev in icmp6_dev() - bpf: fix max stack depth check for async callbacks - eth: mlx5e: - check for NOT_READY flag state after locking - fix page_pool page fragment tracking for XDP - eth: igc: - fix tx hang issue when QBV gate is closed - fix corner cases for TSN offload - eth: octeontx2-af: Move validation of ptp pointer before its usage - eth: ena: fix shift-out-of-bounds in exponential backoff Previous releases - always broken: - core: prevent skb corruption on frag list segmentation - sched: - cls_fw: fix improper refcount update leads to use-after-free - sch_qfq: account for stab overhead in qfq_enqueue - netfilter: - report use refcount overflow - prevent OOB access in nft_byteorder_eval - wifi: mt7921e: fix init command fail with enabled device - eth: ocelot: fix oversize frame dropping for preemptible TCs - eth: fec: recycle pages for transmitted XDP frames" * tag 'net-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits) selftests: tc-testing: add test for qfq with stab overhead net/sched: sch_qfq: account for stab overhead in qfq_enqueue selftests: tc-testing: add tests for qfq mtu sanity check net/sched: sch_qfq: reintroduce lmax bound check for MTU wifi: cfg80211: fix receiving mesh packets without RFC1042 header wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set() net: txgbe: fix eeprom calculation error net/sched: make psched_mtu() RTNL-less safe net: ena: fix shift-out-of-bounds in exponential backoff netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write() net/sched: flower: Ensure both minimum and maximum ports are specified MAINTAINERS: Add another mailing list for QUALCOMM ETHQOS ETHERNET DRIVER docs: netdev: update the URL of the status page wifi: iwlwifi: remove 'use_tfh' config to fix crash xdp: use trusted arguments in XDP hints kfuncs bpf: cpumap: Fix memory leak in cpu_map_update_elem wifi: airo: avoid uninitialized warning in airo_get_rate() octeontx2-pf: Add additional check for MCAM rules net: dsa: Removed unneeded of_node_put in felix_parse_ports_node net: fec: use netdev_err_once() instead of netdev_err() ...
2023-07-08s390/ism: Do not unregister clients with registered DMBsNiklas Schnelle1-10/+13
When ism_unregister_client() is called but the client still has DMBs registered it returns -EBUSY and prints an error. This only happens after the client has already been unregistered however. This is unexpected as the unregister claims to have failed. Furthermore as this implies a client bug a WARN() is more appropriate. Thus move the deregistration after the check and use WARN(). Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-08s390/ism: Fix and simplify add()/remove() callback handlingNiklas Schnelle1-62/+24
Previously the clients_lock was protecting the clients array against concurrent addition/removal of clients but was also accessed from IRQ context. This meant that it had to be a spinlock and that the add() and remove() callbacks in which clients need to do allocation and take mutexes can't be called under the clients_lock. To work around this these callbacks were moved to workqueues. This not only introduced significant complexity but is also subtly broken in at least one way. In ism_dev_init() and ism_dev_exit() clients[i]->tgt_ism is used to communicate the added/removed ISM device to the work function. While write access to client[i]->tgt_ism is protected by the clients_lock and the code waits that there is no pending add/remove work before and after setting clients[i]->tgt_ism this is not enough. The problem is that the wait happens based on per ISM device counters. Thus a concurrent ism_dev_init()/ism_dev_exit() for a different ISM device may overwrite a clients[i]->tgt_ism between unlocking the clients_lock and the subsequent wait for the work to finnish. Thankfully with the clients_lock no longer held in IRQ context it can be turned into a mutex which can be held during the calls to add()/remove() completely removing the need for the workqueues and the associated broken housekeeping including the per ISM device counters and the clients[i]->tgt_ism. Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-08s390/ism: Fix locking for forwarding of IRQs and events to clientsNiklas Schnelle1-8/+36
The clients array references all registered clients and is protected by the clients_lock. Besides its use as general list of clients the clients array is accessed in ism_handle_irq() to forward ISM device events to clients. While the clients_lock is taken in the IRQ handler when calling handle_event() it is however incorrectly not held during the client->handle_irq() call and for the preceding clients[] access leaving it unprotected against concurrent client (un-)registration. Furthermore the accesses to ism->sba_client_arr[] in ism_register_dmb() and ism_unregister_dmb() are not protected by any lock. This is especially problematic as the client ID from the ism->sba_client_arr[] is not checked against NO_CLIENT and neither is the client pointer checked. Instead of expanding the use of the clients_lock further add a separate array in struct ism_dev which references clients subscribed to the device's events and IRQs. This array is protected by ism->lock which is already taken in ism_handle_irq() and can be taken outside the IRQ handler when adding/removing subscribers or the accessing ism->sba_client_arr[]. This also means that the clients_lock is no longer taken in IRQ context. Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-06Merge tag 's390-6.5-2' of ↵Linus Torvalds24-192/+42
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Alexander Gordeev: - Fix virtual vs physical address confusion in vmem_add_range() and vmem_remove_range() functions - Include <linux/io.h> instead of <asm/io.h> and <asm-generic/io.h> throughout s390 code - Make all PSW related defines also available for assembler files. Remove PSW_DEFAULT_KEY define from uapi for that - When adding an undefined symbol the build still succeeds, but userspace crashes trying to execute VDSO, because the symbol is not resolved. Add undefined symbols check to prevent that - Use kvmalloc_array() instead of kzalloc() for allocaton of 256k memory when executing s390 crypto adapter IOCTL - Add -fPIE flag to prevent decompressor misaligned symbol build error with clang - Use .balign instead of .align everywhere. This is a no-op for s390, but with this there no mix in using .align and .balign anymore - Filter out -mno-pic-data-is-text-relative flag when compiling kernel to prevent VDSO build error - Rework entering of DAT-on mode on CPU restart to use PSW_KERNEL_BITS mask directly - Do not retry administrative requests to some s390 crypto cards, since the firmware assumes replay attacks - Remove most of the debug code, which is build in when kernel config option CONFIG_ZCRYPT_DEBUG is enabled - Remove CONFIG_ZCRYPT_MULTIDEVNODES kernel config option and switch off the multiple devices support for the s390 zcrypt device driver - With the conversion to generic entry machine checks are accounted to the current context instead of irq time. As result, the STCKF instruction at the beginning of the machine check handler and the lowcore member are no longer required, therefore remove it - Fix various typos found with codespell - Minor cleanups to CPU-measurement Counter and Sampling Facilities code - Revert patch that removes VMEM_MAX_PHYS macro, since it causes a regression * tag 's390-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (25 commits) Revert "s390/mm: get rid of VMEM_MAX_PHYS macro" s390/cpum_sf: remove check on CPU being online s390/cpum_sf: handle casts consistently s390/cpum_sf: remove unnecessary debug statement s390/cpum_sf: remove parameter in call to pr_err s390/cpum_sf: simplify function setup_pmu_cpu s390/cpum_cf: remove unneeded debug statements s390/entry: remove mcck clock s390: fix various typos s390/zcrypt: remove ZCRYPT_MULTIDEVNODES kernel config option s390/zcrypt: do not retry administrative requests s390/zcrypt: cleanup some debug code s390/entry: rework entering DAT-on mode on CPU restart s390/mm: fence off VM macros from asm and linker s390: include linux/io.h instead of asm/io.h s390/ptrace: make all psw related defines also available for asm s390/ptrace: remove PSW_DEFAULT_KEY from uapi s390/vdso: filter out mno-pic-data-is-text-relative cflag s390: consistently use .balign instead of .align s390/decompressor: fix misaligned symbol build error ...
2023-07-06Merge tag 'net-6.5-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, bpf and wireguard. Current release - regressions: - nvme-tcp: fix comma-related oops after sendpage changes Current release - new code bugs: - ptp: make max_phase_adjustment sysfs device attribute invisible when not supported Previous releases - regressions: - sctp: fix potential deadlock on &net->sctp.addr_wq_lock - mptcp: - ensure subflow is unhashed before cleaning the backlog - do not rely on implicit state check in mptcp_listen() Previous releases - always broken: - net: fix net_dev_start_xmit trace event vs skb_transport_offset() - Bluetooth: - fix use-bdaddr-property quirk - L2CAP: fix multiple UaFs - ISO: use hci_sync for setting CIG parameters - hci_event: fix Set CIG Parameters error status handling - hci_event: fix parsing of CIS Established Event - MGMT: fix marking SCAN_RSP as not connectable - wireguard: queuing: use saner cpu selection wrapping - sched: act_ipt: various bug fixes for iptables <> TC interactions - sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX - dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging - eth: sfc: fix null-deref in devlink port without MAE access - eth: ibmvnic: do not reset dql stats on NON_FATAL err Misc: - xsk: honor SO_BINDTODEVICE on bind" * tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits) nfp: clean mc addresses in application firmware when closing port selftests: mptcp: pm_nl_ctl: fix 32-bit support selftests: mptcp: depend on SYN_COOKIES selftests: mptcp: userspace_pm: report errors with 'remove' tests selftests: mptcp: userspace_pm: use correct server port selftests: mptcp: sockopt: return error if wrong mark selftests: mptcp: sockopt: use 'iptables-legacy' if available selftests: mptcp: connect: fail if nft supposed to work mptcp: do not rely on implicit state check in mptcp_listen() mptcp: ensure subflow is unhashed before cleaning the backlog s390/qeth: Fix vipa deletion octeontx-af: fix hardware timestamp configuration net: dsa: sja1105: always enable the send_meta options net: dsa: tag_sja1105: fix MAC DA patching from meta frames net: Replace strlcpy with strscpy pptp: Fix fib lookup calls. mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX xsk: Honor SO_BINDTODEVICE on bind ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported ...
2023-07-05s390/qeth: Fix vipa deletionThorsten Winkler1-1/+1
Change boolean parameter of function "qeth_l3_vipa_store" inside the "qeth_l3_dev_vipa_del4_store" function from "true" to "false" because "true" is used for adding a virtual ip address and "false" for deleting. Fixes: 2390166a6b45 ("s390/qeth: clean up L3 sysfs code") Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-04Revert "s390/mm: get rid of VMEM_MAX_PHYS macro"Alexander Gordeev1-3/+3
This reverts commit 456be42aa713e7f83b467db66ceae779431c7d9d. The assumption VMEM_MAX_PHYS should match ident_map_size is wrong. At least discontiguous saved segments (DCSS) could be loaded at addresses beyond ident_map_size and dcssblk device driver might fail as result. Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-07 01:34:29 +0300