summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2010-08-11Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds3-2/+19
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits) block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n xen-blkfront: fix missing out label blkdev: fix blkdev_issue_zeroout return value block: update request stacking methods to support discards block: fix missing export of blk_types.h writeback: fix bad _bh spinlock nesting drbd: revert "delay probes", feature is being re-implemented differently drbd: Initialize all members of sync_conf to their defaults [Bugz 315] drbd: Disable delay probes for the upcomming release writeback: cleanup bdi_register writeback: add new tracepoints writeback: remove unnecessary init_timer call writeback: optimize periodic bdi thread wakeups writeback: prevent unnecessary bdi threads wakeups writeback: move bdi threads exiting logic to the forker thread writeback: restructure bdi forker loop a little writeback: move last_active to bdi writeback: do not remove bdi from bdi_list writeback: simplify bdi code a little writeback: do not lose wake-ups in bdi threads ... Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and drivers/scsi/scsi_error.c as per Jens.
2010-08-11Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds13-33/+263
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] dasd: tunable missing interrupt handler [S390] dasd: allocate fallback cqr for reserve/release [S390] topology: use default MC domain initializer [S390] initrd: change default load address [S390] cmm, smsgiucv_app: convert sender to uppercase [S390] cmm: add missing __init/__exit annotations [S390] cio: use all available paths for some internal I/O [S390] ccwreq: add ability to use all paths [S390] cio: ccw_device_online_store return -EINVAL in case of missing driver [S390] cio: Log the response from the unit check handler [S390] cio: CHSC SIOSL Support
2010-08-10s390: remove WARN_ON for misc_deregister() failuresAkinobu Mita3-3/+3
The previous change added WARN_ON() in misc_deregister(). So it is not necessary to WARN_ON() misc_deregister() failure by callers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09[S390] dasd: tunable missing interrupt handlerStefan Haberland6-9/+81
This feature provides a user interface to specify the timeout for missing interrupts for standard I/O operations. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-09[S390] dasd: allocate fallback cqr for reserve/releaseStefan Weinhuber1-13/+60
The DASD reserve and release ioctls use the preallocated memory pool of the respective device to build their CCW requests. However, when the device is busy, the pool may already be empty and the ioctl fails. Usually this can be recovered by calling the ioctl again, but in a situation in which we need to issue an unconditional reserve to make a device operational again, this would be not recoverable. To avoid a failure due to lack of memory, DASD device driver will preallocate enough memory for a single reserve/release request, which can be used if normal allocation fails. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-09[S390] cmm, smsgiucv_app: convert sender to uppercaseHendrik Brueckner1-0/+7
The sender kernel parameter contains a z/VM user ID where alphabetic characters must be specified in uppercase. Allow users to specify lowercase characters and convert the sender string to uppercase at module initialization. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-09[S390] cio: use all available paths for some internal I/OSebastian Ott2-2/+0
Use all available paths for the SENSE ID and STLCK commands. This prevents deadlocks in conjunction with reserved devices. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-09[S390] ccwreq: add ability to use all pathsSebastian Ott4-7/+22
Change the ccwrequest infrastructure to use more than one channel path per start I/O. A flag "singlepath" is added to struct ccw_request - if set, the old behavior is used. This flag is set for all exploiters of the ccwrequest infrastructure - so there is no functional change through this patch. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-09[S390] cio: ccw_device_online_store return -EINVAL in case of missing driverSebastian Ott1-4/+6
If no driver is attached to a device or the driver provides no set_online/set_offline function, setting this device online/offline via its sysfs online attribute will silently fail but return success. This patch changes the behavior to return -EINVAL in those cases. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-09[S390] cio: Log the response from the unit check handlerMichael Ernst1-0/+2
Log the response from the unit check handler which triggers further cio internal i/o processing. Signed-off-by: Michael Ernst <mernst@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-09[S390] cio: CHSC SIOSL SupportMichael Ernst3-0/+87
A Linux interface for the CHSC command store-I/O-operation-status-and-initiate-logging (SIOSL). Model-dependent logging within the channel subsystem can be invoked via a helper function or a writable subchannel device attribute. Signed-off-by: Michael Ernst <mernst@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-07block: push down BKL into .open and .releaseArnd Bergmann3-1/+18
The open and release block_device_operations are currently called with the BKL held. In order to change that, we must first make sure that all drivers that currently rely on this have no regressions. This blindly pushes the BKL into all .open and .release operations for all block drivers to prepare for the next step. The drivers can subsequently replace the BKL with their own locks or remove it completely when it can be shown that it is not needed. The functions blkdev_get and blkdev_put are the only remaining users of the big kernel lock in the block layer, besides a few uses in the ioctl code, none of which need to serialize with blkdev_{get,put}. Most of these two functions is also under the protection of bdev->bd_mutex, including the actual calls to ->open and ->release, and the common code does not access any global data structures that need the BKL. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07block: remove q->prepare_flush_fn completelyFUJITA Tomonori1-1/+1
This removes q->prepare_flush_fn completely (changes the blk_queue_ordered API). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds16-260/+510
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (276 commits) [SCSI] zfcp: Trigger logging in the FCP channel on qdio error conditions [SCSI] zfcp: Introduce experimental support for DIF/DIX [SCSI] zfcp: Enable data division support for FCP devices [SCSI] zfcp: Prevent access on uninitialized memory. [SCSI] zfcp: Post events through FC transport class [SCSI] zfcp: Cleanup QDIO attachment and improve processing. [SCSI] zfcp: Cleanup function parameters for sbal value. [SCSI] zfcp: Use correct width for timer_interval field [SCSI] zfcp: Remove SCSI device when removing unit [SCSI] zfcp: Use memdup_user and kstrdup [SCSI] zfcp: Fix retry after failed "open port" erp action [SCSI] zfcp: Fail erp after timeout [SCSI] zfcp: Use forced_reopen in terminate_rport_io callback [SCSI] zfcp: Register SCSI devices after successful fc_remote_port_add [SCSI] zfcp: Do not try "forced close" when port is already closed [SCSI] zfcp: Do not unblock rport from REOPEN_PORT_FORCED [SCSI] sd: add support for runtime PM [SCSI] implement runtime Power Management [SCSI] convert to the new PM framework [SCSI] Unify SAM_ and SAM_STAT_ macros ...
2010-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds10-412/+446
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits) phy/marvell: add 88ec048 support igb: Program MDICNFG register prior to PHY init e1000e: correct MAC-PHY interconnect register offset for 82579 hso: Add new product ID can: Add driver for esd CAN-USB/2 device l2tp: fix export of header file for userspace can-raw: Fix skb_orphan_try handling Revert "net: remove zap_completion_queue" net: cleanup inclusion phy/marvell: add 88e1121 interface mode support u32: negative offset fix net: Fix a typo from "dev" to "ndev" igb: Use irq_synchronize per vector when using MSI-X ixgbevf: fix null pointer dereference due to filter being set for VLAN 0 e1000e: Fix irq_synchronize in MSI-X case e1000e: register pm_qos request on hardware activation ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice net: Add getsockopt support for TCP thin-streams cxgb4: update driver version cxgb4: add new PCI IDs ... Manually fix up conflicts in: - drivers/net/e1000e/netdev.c: due to pm_qos registration infrastructure changes - drivers/net/phy/marvell.c: conflict between adding 88ec048 support and cleaning up the IDs - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req conflict (registration change vs marking it static)
2010-07-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds3-8/+20
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] ibmvscsi: Fix oops when an interrupt is pending during probe [SCSI] zfcp: Update status read mempool [SCSI] zfcp: Do not wait for SBALs on stopped queue [SCSI] zfcp: Fix check whether unchained ct_els is possible [SCSI] ipr: fix resource path display and formatting
2010-07-28[SCSI] zfcp: Trigger logging in the FCP channel on qdio error conditionsChristof Schmitt4-4/+40
Exploit the cio siosl function to trigger logging in the FCP channel on qdio error conditions. Add a helper function in zfcp_qdio to ensure that tracing is only triggered once before calling qdio_shutdown. Trigger in zfcp for hardware logs are: - timeout for FSF requests to the FCP channel - "no recommendation" status from FCP channel - invalid FSF protocol status - stalled outbound queue - unknown request id on inbound queue - QDIO_ERROR_SLSB_STATE All of the above triggers run from the Linux qdio softirq context, so no additional synchronization is necessary for the handling of the ZFCP_STATUS_ADAPTER_SIOSL_ISSUED flag. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Introduce experimental support for DIF/DIXFelix Beck9-30/+185
Introduce support for DIF/DIX in zfcp: Report the capabilities for the Scsi_host, map the protection data when issuing I/O requests and handle the new error codes. Also add the fsf data_direction field to the hba trace, it is useful information for debugging in that area. This is an EXPERIMENTAL feature for now. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Enable data division support for FCP devicesChristof Schmitt3-1/+13
Try to enable data division support for FCP devices and indicate in the adapter status flag if it succeeded. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Prevent access on uninitialized memory.Swen Schillig1-1/+1
Initialize allocated memory to zero to prevent access on error. This prevents a possible error in the error handling path. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Post events through FC transport classSven Schuetz6-0/+90
Post FC transport class netlink events for usage in the userspace, e.g. for HBAAPI. Supported events are those required for the polled events in HBAAPI. - link up - link down - incoming RSCN (events related to FC-AL are not supported, as zfcp has no support for FC-AL) Signed-off-by: Sven Schuetz <sven@linux.vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Cleanup QDIO attachment and improve processing.Swen Schillig3-139/+69
Some definitions and structures in the zfcp QDIO processing are improved by the removal of not required variables and processing steps. I addition the naming of some variables is changed to make their purpose more clear. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Cleanup function parameters for sbal value.Swen Schillig6-50/+47
A lot of functions require the amount of SBALs as one of their parameter which is most times invariable. Therefore remove this parameter and set the SBAL value explicitly if a non standard value is required. In addition the warning message "oversized data" is replaced with a BUG_ON() statement assuring the limits defined and requested by zfcp. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Use correct width for timer_interval fieldChristof Schmitt2-1/+3
The timer_interval is 14 bits in width. Introduce a define for properly masking the value. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Remove SCSI device when removing unitChristof Schmitt3-2/+10
Configuring a LUN in zfcp, also creates a SCSI device. For consistency, it makes sense to remove the SCSI device when the LUN is deconfigured. Replace the flush_work with the call to scsi_remove_device: scsi_remove_device also takes the scan_mutex that synchronizes itself with any long running device discovery. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Use memdup_user and kstrdupChristof Schmitt2-12/+4
Use the functions memdup_user and kstrdup to allocate memory and copy the data in one step, saving some lines of code. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Fix retry after failed "open port" erp actionChristof Schmitt1-2/+1
Trying to enqueue a port erp action from the port erp strategy will fail in zfcp_erp_required_act. To try the same action again, return ZFCP_ERP_FAILED. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Fail erp after timeoutChristof Schmitt1-0/+6
After a timeout notification, do not try to run the erp strategy. Return from the erp with "failed" to possibly trigger a retry. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Use forced_reopen in terminate_rport_io callbackChristof Schmitt1-3/+5
When running in non-NPIV mode, the port_reopen in terminate_rport_io might succeed even though the remote port is not available. If the same port connection is held open from another operating system, the reopen is only a virtual operation and might not hit the SAN. Fix this by changing the call to forced_reopen that forces a logout/login operation in the SAN. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Register SCSI devices after successful fc_remote_port_addChristof Schmitt5-17/+33
When the successful return of an adisc is the final step to set the port online, the registration of SCSI devices might be omitted. SCSI devices that have been removed before (due to a short dev_loss_tmo setting) might not be attached again. The problem is that the registration of SCSI devices is done only after erp has finished. The correct place would be after the call to fc_remote_port_add to mimick the scan in the FC transport class. Change the registration of SCSI devices to be triggered after the fc_remote_port_add call. For the initial inquiry command to succeed, the unit must also be open. If the unit reopen is still pending, the inquiry command to the LUN will be deferred with DID_IMM_RETRY, so there is no harm from this approach. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Do not try "forced close" when port is already closedChristof Schmitt1-1/+5
When the port is already "physically closed" try the reopen instead. There is no way to send a "physically close" to an already closed port. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] zfcp: Do not unblock rport from REOPEN_PORT_FORCEDChristof Schmitt1-1/+2
When the REOPEN_PORT_FORCED erp action succeeds, the port has been closed. A REOPEN_PORT will try to open the port after the REPORT_PORT_FORCED. The rport should only be unblocked after the successful completion of the reopen port. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-23qeth: avoid useless removal of multicast addressesUrsula Braun1-2/+0
Function qeth_l2_remove_device invokes qeth_l2_del_all_mc at the end. This is needless, because it is already called in the offline function. And even more this is invalid, because multicast addresses cannot be removed in DOWN state. Thus this patch deletes invocation of qeth_l2_del_all_mc in function qeth_l2_remove_device. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: Use memdup_user when user data is immediately copied into the ↵Julia Lawall1-8/+3
allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: return zero from reply callback functionsUrsula Braun1-8/+2
Reply callback functions in qeth should return zero if command response consists of one part only, otherwise qeth continues waiting for further parts of the command response. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23claw: A claw device is a group of just 2 ccw devicesUrsula Braun1-1/+1
When creating a claw device, just 2 subchannels have to be grouped. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: avoid loop if ipa command response is missingUrsula Braun2-0/+16
If qeth issues an ipa command, but for some reasons the response never comes back, qeth reaches a timeout. Reset the irq_pending flag of the write channel in timeout handling code and trigger a recovery to avoid endless looping for the following ipa command. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: serialize sysfs-triggered device configurationsUrsula Braun5-7/+22
This patch serializes device removal and other sysfs-triggered configurations by moving removal of sysfs-attributes to the beginning of the remove functions. And it serializes online/offline setting and discipline-switching (causing reestablishing of the net_device) by making use of a new discipline mutex. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: Clear mac_bits field when switching between Layer 2 and Layer 3Carsten Otte1-0/+1
This patch fixes a problem that occurs when switching from layer 3 to layer 2 mode. Resetting this mac_bits makes sure that we retrieve our mac address from the card, otherwise the interface simply would'nt work. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: IP address takeover flag settingKlaus-Dieter Wacker5-9/+18
The qeth IP address flag setting is possible when device is offline. When setting device online afterwards the current set IP addresses have to be correctly registered with the device regarding the IP address takeover attribute. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-22[SCSI] zfcp: Update status read mempoolChristof Schmitt2-1/+10
Commit 64deb6efdc5504ce97b5c1c6f281fffbc150bd93 changed the way status read buffers are handled but forgot to adjust the mempool to the new size. Add the call to resize the mempool after the exchange config data. Also use the define instead of the hard coded number in the fsf callback for consistency. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-22[SCSI] zfcp: Do not wait for SBALs on stopped queueChristof Schmitt2-6/+9
Trying to read the FC host statistics on an offline adapter results in a 5 seconds wait. Reading the statistics tries to issue an exchange port data request which first waits up to 5 seconds for an entry in the request queue. Change the strategy for getting a free SBAL to exit when the queue is stopped. Reading the statistics will then fail without the wait. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-22[SCSI] zfcp: Fix check whether unchained ct_els is possibleSwen Schillig1-1/+1
A false check was performed whether an unchained ct_els is possible or not. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-19[S390] cio: fix potential overflow in chpid descriptorSebastian Ott1-1/+1
The length filed in the chsc response block (if valid) has a value of n*(sizeof(chp_desc))+8 (for the response block header). When we memcopied from the response block to the actual descriptor we copied 8 bytes too much. The bug was not revealed since the descriptor is embedded in struct channel_path. Since we only write one descriptor at a time ignore the length value and use sizeof(*desc). Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-07-19[S390] add missing device putStefan Haberland1-1/+3
The dasd_alias_show function does not return a device reference in case the device is an alias. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-06-24qeth: handle missing z/VM authorization of OSXUrsula Braun2-4/+9
For z/VM guest operating systems, OSX CHPIDs can only be used, if LPAR and z/VM userID are explicitly authorized through the Service Element. Issue a message if this SE-authorization is missing. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24qeth: specify correct function level for OSN devicesUrsula Braun1-0/+1
OSN devices use the same function level as OSD devices. This patch adds OSN-devices to the initialization function for func_level. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24qeth: fix page breaks in hw headersFrank Blaschka4-73/+65
Turning on memory debugging showed there could be page breaks in hardware headers. OSA does not allow this so we had to add code to bounce the header in case there is a page break. This patch also fixes a problem in case the skb->data part of a fragmented skb spreads multiple pages. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24qeth: fix use after free for qeths debug areaCarsten Otte1-1/+0
The function qeth_free_buffer_pool is called _after_ the per-card debug area has been released. This debug message is not all that usefull anyway, and thus gets removed. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24qeth: Fold qeth_qerr debug areaCarsten Otte2-11/+4
This patch removes the qerr debug area. Most info that goes in here is logged to the card's local debug area already, those duplicates are removed. All other elements are moved to the card's local debug area. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 12:13:42 +0300