| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The channel-subsystem-driver scans for newly available devices whenever
device-IDs are removed from the cio_ignore list using a command such as:
echo free >/proc/cio_ignore
Since an I/O device scan might interfer with running I/Os, commit
172da89ed0ea ("s390/cio: avoid excessive path-verification requests")
introduced an optimization to exclude online devices from the scan.
The newly added check for online devices incorrectly assumes that
an I/O-subchannel's drvdata points to a struct io_subchannel_private.
For devices that are bound to a non-default I/O subchannel driver, such
as the vfio_ccw driver, this results in an out-of-bounds read access
during each scan.
Fix this by changing the scan logic to rely on a driver-independent
online indication. For this we can use struct subchannel->config.ena,
which is the driver's requested subchannel-enabled state. Since I/Os
can only be started on enabled subchannels, this matches the intent
of the original optimization of not scanning devices where I/O might
be running.
Fixes: 172da89ed0ea ("s390/cio: avoid excessive path-verification requests")
Fixes: 0c3812c347bf ("s390/cio: derive cdev information only for IO-subchannels")
Cc: <stable@vger.kernel.org> # v5.15
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Pull VFIO updates from Alex Williamson:
- Prune private items from vfio_pci_core.h to a new internal header,
fix missed function rename, and refactor vfio-pci interrupt defines
(Jason Gunthorpe)
- Create consistent naming and handling of ioctls with a function per
ioctl for vfio-pci and vfio group handling, use proper type args
where available (Jason Gunthorpe)
- Implement a set of low power device feature ioctls allowing userspace
to make use of power states such as D3cold where supported (Abhishek
Sahu)
- Remove device counter on vfio groups, which had restricted the page
pinning interface to singleton groups to account for limitations in
the type1 IOMMU backend. Document usage as limited to emulated IOMMU
devices, ie. traditional mdev devices where this restriction is
consistent (Jason Gunthorpe)
- Correct function prefix in hisi_acc driver incurred during previous
refactoring (Shameer Kolothum)
- Correct typo and remove redundant warning triggers in vfio-fsl driver
(Christophe JAILLET)
- Introduce device level DMA dirty tracking uAPI and implementation in
the mlx5 variant driver (Yishai Hadas & Joao Martins)
- Move much of the vfio_device life cycle management into vfio core,
simplifying and avoiding duplication across drivers. This also
facilitates adding a struct device to vfio_device which begins the
introduction of device rather than group level user support and fills
a gap allowing userspace identify devices as vfio capable without
implicit knowledge of the driver (Kevin Tian & Yi Liu)
- Split vfio container handling to a separate file, creating a more
well defined API between the core and container code, masking IOMMU
backend implementation from the core, allowing for an easier future
transition to an iommufd based implementation of the same (Jason
Gunthorpe)
- Attempt to resolve race accessing the iommu_group for a device
between vfio releasing DMA ownership and removal of the device from
the IOMMU driver. Follow-up with support to allow vfio_group to exist
with NULL iommu_group pointer to support existing userspace use cases
of holding the group file open (Jason Gunthorpe)
- Fix error code and hi/lo register manipulation issues in the hisi_acc
variant driver, along with various code cleanups (Longfang Liu)
- Fix a prior regression in GVT-g group teardown, resulting in
unreleased resources (Jason Gunthorpe)
- A significant cleanup and simplification of the mdev interface,
consolidating much of the open coded per driver sysfs interface
support into the mdev core (Christoph Hellwig)
- Simplification of tracking and locking around vfio_groups that fall
out from previous refactoring (Jason Gunthorpe)
- Replace trivial open coded f_ops tests with new helper (Alex
Williamson)
* tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio: (77 commits)
vfio: More vfio_file_is_group() use cases
vfio: Make the group FD disassociate from the iommu_group
vfio: Hold a reference to the iommu_group in kvm for SPAPR
vfio: Add vfio_file_is_group()
vfio: Change vfio_group->group_rwsem to a mutex
vfio: Remove the vfio_group->users and users_comp
vfio/mdev: add mdev available instance checking to the core
vfio/mdev: consolidate all the description sysfs into the core code
vfio/mdev: consolidate all the available_instance sysfs into the core code
vfio/mdev: consolidate all the name sysfs into the core code
vfio/mdev: consolidate all the device_api sysfs into the core code
vfio/mdev: remove mtype_get_parent_dev
vfio/mdev: remove mdev_parent_dev
vfio/mdev: unexport mdev_bus_type
vfio/mdev: remove mdev_from_dev
vfio/mdev: simplify mdev_type handling
vfio/mdev: embedd struct mdev_parent in the parent data structure
vfio/mdev: make mdev.h standalone includable
drm/i915/gvt: simplify vgpu configuration management
drm/i915/gvt: fix a memory leak in intel_gvt_init_vgpu_types
...
|
|
Many of the mdev drivers use a simple counter for keeping track of the
available instances. Move this code to the core code and store the counter
in the mdev_parent. Implement it using correct locking, fixing mdpy.
Drivers just provide the value in the mdev_driver at registration time
and the core code takes care of maintaining it and exposing the value in
sysfs.
[hch: count instances per-parent instead of per-type, use an atomic_t
to avoid taking mdev_list_lock in the show method]
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-15-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Every driver just print a number, simply add a method to the mdev_driver
to return it and provide a standard sysfs show function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-13-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Every driver just emits a static string, simply add a field to the
mdev_type for the driver to fill out or fall back to the sysfs name and
provide a standard sysfs show function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-12-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Every driver just emits a static string, simply feed it through the ops
and provide a standard sysfs show function.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-11-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Just open code the dereferences in the only user.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-10-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Instead of abusing struct attribute_group to control initialization of
struct mdev_type, just define the actual attributes in the mdev_driver,
allocate the mdev_type structures in the caller and pass them to
mdev_register_parent.
This allows the caller to use container_of to get at the containing
structure and thus significantly simplify the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-6-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Simplify mdev_{un}register_device by requiring the caller to pass in
a structure allocate as part of the parent device structure. This
removes the need for a list of parents and the separate mdev_parent
refcount as we can simplify rely on the reference to the parent device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-5-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Include <linux/device.h> and <linux/uuid.h> so that users of this headers
don't need to do that and remove those includes that aren't needed
any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-4-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
ccw is the only exception which cannot use vfio_alloc_device() because
its private device structure is designed to serve both mdev and parent.
Life cycle of the parent is managed by css_driver so vfio_ccw_private
must be allocated/freed in css_driver probe/remove path instead of
conforming to vfio core life cycle for mdev.
Given that use a wait/completion scheme so the mdev remove path waits
after vfio_put_device() until receiving a completion notification from
@release. The completion indicates that all active references on
vfio_device have been released.
After that point although free of vfio_ccw_private is delayed to
css_driver it's at least guaranteed to have no parallel reference on
released vfio device part from other code paths.
memset() in @probe is removed. vfio_device is either already cleared
when probed for the first time or cleared in @release from last probe.
The right fix is to introduce separate structures for mdev and parent,
but this won't happen in short term per prior discussions.
Remove vfio_init/uninit_group_dev() as no user now.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220921104401.38898-14-kevin.tian@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Benjamin Block <bblock@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20220818205948.6360-1-wsa+renesas@sang-engineering.com
Link: https://lore.kernel.org/r/20220818210102.7301-1-wsa+renesas@sang-engineering.com
[gor@linux.ibm.com: squashed two changes linked above together]
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Pull VFIO updates from Alex Williamson:
- Cleanup use of extern in function prototypes (Alex Williamson)
- Simplify bus_type usage and convert to device IOMMU interfaces (Robin
Murphy)
- Check missed return value and fix comment typos (Bo Liu)
- Split migration ops from device ops and fix races in mlx5 migration
support (Yishai Hadas)
- Fix missed return value check in noiommu support (Liam Ni)
- Hardening to clear buffer pointer to avoid use-after-free (Schspa
Shi)
- Remove requirement that only the same mm can unmap a previously
mapped range (Li Zhe)
- Adjust semaphore release vs device open counter (Yi Liu)
- Remove unused arg from SPAPR support code (Deming Wang)
- Rework vfio-ccw driver to better fit new mdev framework (Eric Farman,
Michael Kawano)
- Replace DMA unmap notifier with callbacks (Jason Gunthorpe)
- Clarify SPAPR support comment relative to iommu_ops (Alexey
Kardashevskiy)
- Revise page pinning API towards compatibility with future iommufd
support (Nicolin Chen)
- Resolve issues in vfio-ccw, including use of DMA unmap callback (Eric
Farman)
* tag 'vfio-v6.0-rc1' of https://github.com/awilliam/linux-vfio: (40 commits)
vfio/pci: fix the wrong word
vfio/ccw: Check return code from subchannel quiesce
vfio/ccw: Remove FSM Close from remove handlers
vfio/ccw: Add length to DMA_UNMAP checks
vfio: Replace phys_pfn with pages for vfio_pin_pages()
vfio/ccw: Add kmap_local_page() for memcpy
vfio: Rename user_iova of vfio_dma_rw()
vfio/ccw: Change pa_pfn list to pa_iova list
vfio/ap: Change saved_pfn to saved_iova
vfio: Pass in starting IOVA to vfio_pin/unpin_pages API
vfio/ccw: Only pass in contiguous pages
vfio/ap: Pass in physical address of ind to ap_aqic()
drm/i915/gvt: Replace roundup with DIV_ROUND_UP
vfio: Make vfio_unpin_pages() return void
vfio/spapr_tce: Fix the comment
vfio: Replace the iommu notifier with a device list
vfio: Replace the DMA unmapping notifier with a callback
vfio/ccw: Move FSM open/close to MDEV open/close
vfio/ccw: Refactor vfio_ccw_mdev_reset
vfio/ccw: Create a CLOSE FSM event
...
|
|
If a subchannel is busy when a close is performed, the subchannel
needs to be quiesced and left nice and tidy, so nothing unexpected
(like a solicited interrupt) shows up while in the closed state.
Unfortunately, the return code from this call isn't checked,
so any busy subchannel is treated as a failing one.
Fix that, so that the close on a busy subchannel happens normally.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220728204914.2420989-4-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Now that neither vfio_ccw_sch_probe() nor vfio_ccw_mdev_probe()
affect the FSM state, it doesn't make sense for their _remove()
counterparts try to revert things in this way. Since the FSM open
and close are handled alongside MDEV open/close, these are
unnecessary.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220728204914.2420989-3-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
As pointed out with the simplification of the
VFIO_IOMMU_NOTIFY_DMA_UNMAP notifier [1], the length
parameter was never used to check against the pinned
pages.
Let's correct that, and see if a page is within the
affected range instead of simply the first page of
the range.
[1] https://lore.kernel.org/kvm/20220720170457.39cda0d0.alex.williamson@redhat.com/
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220728204914.2420989-2-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Most of the callers of vfio_pin_pages() want "struct page *" and the
low-level mm code to pin pages returns a list of "struct page *" too.
So there's no gain in converting "struct page *" to PFN in between.
Replace the output parameter "phys_pfn" list with a "pages" list, to
simplify callers. This also allows us to replace the vfio_iommu_type1
implementation with a more efficient one.
And drop the pfn_valid check in the gvt code, as there is no need to
do such a check at a page-backed struct page pointer.
For now, also update vfio_iommu_type1 to fit this new parameter too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-11-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
A PFN is not secure enough to promise that the memory is not IO. And
direct access via memcpy() that only handles CPU memory will crash on
S390 if the PFN is an IO PFN, as we have to use the memcpy_to/fromio()
that uses the special S390 IO access instructions. On the other hand,
a "struct page *" is always a CPU coherent thing that fits memcpy().
Also, casting a PFN to "void *" for memcpy() is not a proper practice,
kmap_local_page() is the correct API to call here, though S390 doesn't
use highmem, which means kmap_local_page() is a NOP.
There's a following patch changing the vfio_pin_pages() API to return
a list of "struct page *" instead of PFNs. It will block any IO memory
from ever getting into this call path, for such a security purpose. In
this patch, add kmap_local_page() to prepare for that.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-10-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The vfio_ccw_cp code maintains both iova and its PFN list because the
vfio_pin/unpin_pages API wanted pfn list. Since vfio_pin/unpin_pages()
now accept "iova", change to maintain only pa_iova list and rename all
"pfn_array" strings to "page_array", so as to simplify the code.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-8-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The vfio_pin/unpin_pages() so far accepted arrays of PFNs of user IOVA.
Among all three callers, there was only one caller possibly passing in
a non-contiguous PFN list, which is now ensured to have contiguous PFN
inputs too.
Pass in the starting address with "iova" alone to simplify things, so
callers no longer need to maintain a PFN list or to pin/unpin one page
at a time. This also allows VFIO to use more efficient implementations
of pin/unpin_pages.
For now, also update vfio_iommu_type1 to fit this new parameter too,
while keeping its input intact (being user_iova) since we don't want
to spend too much effort swapping its parameters and local variables
at that level.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-6-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This driver is the only caller of vfio_pin/unpin_pages that might pass
in a non-contiguous PFN list, but in many cases it has a contiguous PFN
list to process. So letting VFIO API handle a non-contiguous PFN list
is actually counterproductive.
Add a pair of simple loops to pass in contiguous PFNs only, to have an
efficient implementation in VFIO.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-5-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Instead of having drivers register the notifier with explicit code just
have them provide a dma_unmap callback op in their driver ops and rely on
the core code to wire it up.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v4-681e038e30fd+78-vfio_unmap_notif_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
When doing device passthrough where interrupts are being forwarded from
host to guest, we wish to use a pinned section of guest memory as the
vector (the same memory used by the guest as the vector). To accomplish
this, add a new parameter for airq_iv_create which allows passing an
existing vector to be used instead of allocating a new one. The caller
is responsible for ensuring the vector is pinned in memory as well as for
unpinning the memory when the vector is no longer needed.
A subsequent patch will use this new parameter for zPCI interpretation.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-7-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
A subsequent patch will introduce an airq handler that requires additional
TPI information beyond directed vs floating, so pass the entire tpi_info
structure via the handler. Only pci actually uses this information today,
for the other airq handlers this is effectively a no-op.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-6-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Part of the confusion that has existed is the FSM lifecycle of
subchannels between the common CSS driver and the vfio-ccw driver.
During configuration, the FSM state goes from NOT_OPER to STANDBY
to IDLE, but then back to NOT_OPER. For example:
vfio_ccw_sch_probe: VFIO_CCW_STATE_NOT_OPER
vfio_ccw_sch_probe: VFIO_CCW_STATE_STANDBY
vfio_ccw_mdev_probe: VFIO_CCW_STATE_IDLE
vfio_ccw_mdev_remove: VFIO_CCW_STATE_NOT_OPER
vfio_ccw_sch_remove: VFIO_CCW_STATE_NOT_OPER
vfio_ccw_sch_shutdown: VFIO_CCW_STATE_NOT_OPER
Rearrange the open/close events to align with the mdev open/close,
to better manage the memory and state of the devices as time
progresses. Specifically, make mdev_open() perform the FSM open,
and mdev_close() perform the FSM close instead of reset (which is
both close and open).
This makes the NOT_OPER state a dead-end path, indicating the
device is probably not recoverable without fully probing and
re-configuring the device.
This has the nice side-effect of removing a number of special-cases
where the FSM state is managed outside of the FSM itself (such as
the aforementioned mdev_close() routine).
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-12-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Use both the FSM Close and Open events when resetting an mdev,
rather than making a separate call to cio_enable_subchannel().
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-11-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Refactor the vfio_ccw_sch_quiesce() routine to extract the bit that
disables the subchannel and affects the FSM state. Use this to form
the basis of a CLOSE event that will mirror the OPEN event, and move
the subchannel back to NOT_OPER state.
A key difference with that mirroring is that while OPEN handles the
transition from NOT_OPER => STANDBY, the later probing of the mdev
handles the transition from STANDBY => IDLE. On the other hand,
the CLOSE event will move from one of the operating states {IDLE,
CP_PROCESSING, CP_PENDING} => NOT_OPER. That is, there is no stop
in a STANDBY state on the deconfigure path.
Add a call to cp_free() in this event, such that it is captured for
the various permutations of this event.
In the unlikely event that cio_disable_subchannel() returns -EBUSY,
the remaining logic of vfio_ccw_sch_quiesce() can still be used.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-10-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Move the process of enabling a subchannel for use by vfio-ccw
into the FSM, such that it can manage the sequence of lifecycle
events for the device.
That is, if the FSM state is NOT_OPER(erational), then do the work
that would enable the subchannel and move the FSM to STANDBY state.
An attempt to perform this event again from any of the other operating
states (IDLE, CP_PROCESSING, CP_PENDING) will convert the device back
to NOT_OPER so the configuration process can be started again.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-9-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
We currently cut a very basic trace whenever the FSM directs
control to the not operational routine.
Convert this to a message, so it's alongside the other configuration
related traces (create, remove, etc.), and record both the event
that brought us here and the current state of the device.
This will provide some better footprints if things go bad.
Suggested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-8-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The vfio_ccw_mdev_(un)reg routines are merely vfio-ccw routines that
pass control to mdev_(un)register_device. Since there's only one
caller of each, let's just call the mdev routines directly.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-7-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The FSM has an enumerated list of events defined.
Use that as the argument passed to the jump table,
instead of a regular int.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-6-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
There are no remaining users of private->mdev. Remove it.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220707135737.720765-5-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The routine vfio_ccw_sch_event() is tasked with handling subchannel events,
specifically machine checks, on behalf of vfio-ccw. It correctly calls
cio_update_schib(), and if that fails (meaning the subchannel is gone)
it makes an FSM event call to mark the subchannel Not Operational.
If that worked, however, then it decides that if the FSM state was already
Not Operational (implying the subchannel just came back), then it should
simply change the FSM to partially- or fully-open.
Remove this trickery, since a subchannel returning will require more
probing than simply "oh all is well again" to ensure it works correctly.
Fixes: bbe37e4cb8970 ("vfio: ccw: introduce a finite state machine")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-4-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The FSM is in STANDBY state when arriving in vfio_ccw_mdev_probe(),
and this routine converts it to IDLE as part of its processing.
The error exit sets it to IDLE (again) but clears the private->mdev
pointer.
The FSM should of course be managing the state itself, but the
correct thing for vfio_ccw_mdev_probe() to do would be to put
the state back the way it found it.
The corresponding check of private->mdev in vfio_ccw_sch_io_todo()
can be removed, since the distinction is unnecessary at this point.
Fixes: 3bf1311f351ef ("vfio/ccw: Convert to use vfio_register_emulated_iommu_dev()")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-3-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
As vfio-ccw devices are created/destroyed, the uuid of the associated
mdevs that are recorded in $S390DBF/vfio_ccw_msg/sprintf get lost.
This is because a pointer to the UUID is stored instead of the UUID
itself, and that memory may have been repurposed if/when the logs are
examined. The result is usually garbage UUID data in the logs, though
there is an outside chance of an oops happening here.
Simply remove the UUID from the traces, as the subchannel number will
provide useful configuration information for problem determination,
and is stored directly into the log instead of a pointer.
As we were the only consumer of mdev_uuid(), remove that too.
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Michael Kawano <mkawano@linux.ibm.com>
Fixes: 60e05d1cf0875 ("vfio-ccw: add some logging")
Fixes: b7701dfbf9832 ("vfio-ccw: Register a chp_event callback for vfio-ccw")
[farman: reworded commit message, added Fixes: tags]
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220707135737.720765-2-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The use of 'extern' in function prototypes has been disrecommended in
the kernel coding style for several years now, remove them from all vfio
related files so contributors no longer need to decide between style and
consistency.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/165471414407.203056.474032786990662279.stgit@omen
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
|
|
Pull vfio updates from Alex Williamson:
- Improvements to mlx5 vfio-pci variant driver, including support for
parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API to use
vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA ownership
(Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and kvm
association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
* tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits)
vfio: remove VFIO_GROUP_NOTIFY_SET_KVM
vfio/pci: Add driver_managed_dma to the new vfio_pci drivers
vfio: Do not manipulate iommu dma_owner for fake iommu groups
vfio/pci: Move the unused device into low power state with runtime PM
vfio/pci: Virtualize PME related registers bits and initialize to zero
vfio/pci: Change the PF power state to D0 before enabling VFs
vfio/pci: Invalidate mmaps and block the access in D3hot power state
vfio: Change struct vfio_group::container_users to a non-atomic int
vfio: Simplify the life cycle of the group FD
vfio: Fully lock struct vfio_group::container
vfio: Split up vfio_group_get_device_fd()
vfio: Change struct vfio_group::opened from an atomic to bool
vfio: Add missing locking for struct vfio_group::kvm
kvm/vfio: Fix potential deadlock problem in vfio
include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead
vfio/pci: Use the struct file as the handle not the vfio_group
kvm/vfio: Remove vfio_group from kvm
vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm()
vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent()
vfio: Remove vfio_external_group_match_file()
...
|
|
Pull drm updates from Dave Airlie:
"Intel have enabled DG2 on certain SKUs for laptops, AMD has started
some new GPU support, msm has user allocated VA controls
dma-buf:
- add dma_resv_replace_fences
- add dma_resv_get_singleton
- make dma_excl_fence private
core:
- EDID parser refactorings
- switch drivers to drm_mode_copy/duplicate
- DRM managed mutex initialization
display-helper:
- put HDMI, SCDC, HDCP, DSC and DP into new module
gem:
- rework fence handling
ttm:
- rework bulk move handling
- add common debugfs for resource managers
- convert to kvcalloc
format helpers:
- support monochrome formats
- RGB888, RGB565 to XRGB8888 conversions
fbdev:
- cfb/sys_imageblit fixes
- pagelist corruption fix
- create offb platform device
- deferred io improvements
sysfb:
- Kconfig rework
- support for VESA mode selection
bridge:
- conversions to devm_drm_of_get_bridge
- conversions to panel_bridge
- analogix_dp - autosuspend support
- it66121 - audio support
- tc358767 - DSI to DPI support
- icn6211 - PLL/I2C fixes, DT property
- adv7611 - enable DRM_BRIDGE_OP_HPD
- anx7625 - fill ELD if no monitor
- dw_hdmi - add audio support
- lontium LT9211 support, i.MXMP LDB
- it6505: Kconfig fix, DPCD set power fix
- adv7511 - CEC support for ADV7535
panel:
- ltk035c5444t, B133UAN01, NV3052C panel support
- DataImage FG040346DSSWBG04 support
- st7735r - DT bindings fix
- ssd130x - fixes
i915:
- DG2 laptop PCI-IDs ("motherboard down")
- Initial RPL-P PCI IDs
- compute engine ABI
- DG2 Tile4 support
- DG2 CCS clear color compression support
- DG2 render/media compression formats support
- ATS-M platform info
- RPL-S PCI IDs added
- Bump ADL-P DMC version to v2.16
- Support static DRRS
- Support multiple eDP/LVDS native mode refresh rates
- DP HDR support for HSW+
- Lots of display refactoring + fixes
- GuC hwconfig support and query
- sysfs support for multi-tile
- fdinfo per-client gpu utilisation
- add geometry subslices query
- fix prime mmap with LMEM
- fix vm open count and remove vma refcounts
- contiguous allocation fixes
- steered register write support
- small PCI BAR enablement
- GuC error capture support
- sunset igpu legacy mmap support for newer devices
- GuC version 70.1.1 support
amdgpu:
- Initial SoC21 support
- SMU 13.x enablement
- SMU 13.0.4 support
- ttm_eu cleanups
- USB-C, GPUVM updates
- TMZ fixes for RV
- RAS support for VCN
- PM sysfs code cleanup
- DC FP rework
- extend CG/PG flags to 64-bit
- SI dpm lockdep fix
- runtime PM fixes
amdkfd:
- RAS/SVM fixes
- TLB flush fixes
- CRIU GWS support
- ignore bogus MEC signals more efficiently
msm:
- Fourcc modifier for tiled but not compressed layouts
- Support for userspace allocated IOVA (GPU virtual address)
- DPU: DSC (Display Stream Compression) support
- DP: eDP support
- DP: conversion to use drm_bridge and drm_bridge_connector
- Merge DPU1 and MDP5 MDSS driver
- DPU: writeback support
nouveau:
- make some structures static
- make some variables static
- switch to drm_gem_plane_helper_prepare_fb
radeon:
- misc fixes/cleanups
mxsfb:
- rework crtc mode setting
- LCDIF CRC support
etnaviv:
- fencing improvements
- fix address space collisions
- cleanup MMU reference handling
gma500:
- GEM/GTT improvements
- connector handling fixes
komeda:
- switch to plane reset helper
mediatek:
- MIPI DSI improvements
omapdrm:
- GEM improvements
qxl:
- aarch64 support
vc4:
- add a CL submission tracepoint
- HDMI YUV support
- HDMI/clock improvements
- drop is_hdmi caching
virtio:
- remove restriction of non-zero blob types
vmwgfx:
- support for cursormob and cursorbypass 4
- fence improvements
tidss:
- reset DISPC on startup
solomon:
- SPI support
- DT improvements
sun4i:
- allwinner D1 support
- drop is_hdmi caching
imx:
- use swap() instead of open-coding
- use devm_platform_ioremap_resource
- remove redunant initializations
ast:
- Displayport support
rockchip:
- Refactor IOMMU initialisation
- make some structures static
- replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi
- support swapped YUV formats,
- clock improvements
- rk3568 support
- VOP2 support
mediatek:
- MT8186 support
tegra:
- debugabillity improvements"
* tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits)
drm/i915/dsi: fix VBT send packet port selection for ICL+
drm/i915/uc: Fix undefined behavior due to shift overflowing the constant
drm/i915/reg: fix undefined behavior due to shift overflowing the constant
drm/i915/gt: Fix use of static in macro mismatch
drm/i915/audio: fix audio code enable/disable pipe logging
drm/i915: Fix CFI violation with show_dynamic_id()
drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c
drm/i915/gt: Fix build error without CONFIG_PM
drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path
drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations
drm/msm: don't free the IRQ if it was not requested
drm/msm/dpu: limit writeback modes according to max_linewidth
drm/amd: Don't reset dGPUs if the system is going to s2idle
drm/amdgpu: Unmap legacy queue when MES is enabled
drm: msm: fix possible memory leak in mdp5_crtc_cursor_set()
drm/msm: Fix fb plane offset calculation
drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init
drm/msm/dsi: don't powerup at modeset time for parade-ps8640
drm/rockchip: Change register space names in vop2
dt-bindings: display: rockchip: make reg-names mandatory for VOP2
...
|
|
Every caller has a readily available vfio_device pointer, use that instead
of passing in a generic struct device. The struct vfio_device already
contains the group we need so this avoids complexity, extra refcountings,
and a confusing lifecycle model.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v4-8045e76bf00b+13d-vfio_mdev_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The next patch wants the vfio_device instead. There is no reason to store
a pointer here since we can container_of back to the vfio_device.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v4-8045e76bf00b+13d-vfio_mdev_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
All callers have a struct vfio_device trivially available, pass it in
directly and avoid calling the expensive vfio_group_get_from_dev().
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v4-8045e76bf00b+13d-vfio_mdev_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
clock_delta is declared as unsigned long in various places. However,
the clock sync delta can be negative. This would add a huge positive
offset in clock_sync_global where clock_delta is added to clk.eitod
which is a 72 bit integer. Declare it as signed long to fix this.
Cc: stable@vger.kernel.org
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use a helper to set driver_override to the reduce amount of duplicated
code. Make the driver_override field const char, because it is not
modified by the core and it matches other subsystems.
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The last useful member in this struct is the supported_type_groups, move
it to the mdev_driver and delete mdev_parent_ops.
Replace it with mdev_driver as an argument to mdev_register_device()
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-33-hch@lst.de
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
cleanup the s390's use of the timer API
- del_timer() contains timer_pending() condition
- mod_timer(timer, expires) is equivalent to:
del_timer(timer);
timer->expires = expires;
add_timer(timer);
If the timer is inactive it will be activated, using add_timer() on
condition !timer_pending(&private->timer) is redundant.
Just cleanup, no logic change.
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20220322030057.1243196-1-liaoyu15@huawei.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Follow arm64 and riscv and move the EX_TABLE define to asm-extable.h
which is a lot less generic than the current linkage.h.
Also make sure that all files which contain EX_TABLE usages actually
include the new header file. This should make sure that the files
always compile and there won't be any random compile breakage due to
other header file dependencies.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Protected virtualization guests have to use shared pages for airq
notifier bit vectors and summary bytes or bits, thus these need to be
allocated as DMA coherent memory. Commit b50623e5db80 ("s390/airq: use
DMA memory for adapter interrupts") took care of the notifier bit
vectors, but omitted to take care of the summary bytes/bits.
In practice this omission is not a big deal, because the summary ain't
necessarily allocated here, but can be supplied by the driver. Currently
all the I/O we have for SE guests is virtio-ccw, and virtio-ccw uses a
self-allocated array of summary indicators.
Let us cover all our bases nevertheless!
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
This helps to avoid several merge conflicts later.
* fixes:
s390/extable: fix exception table sorting
s390/ftrace: fix arch_ftrace_get_regs implementation
s390/ftrace: fix ftrace_caller/ftrace_regs_caller generation
s390/setup: preserve memory at OLDMEM_BASE and OLDMEM_SIZE
s390/cio: verify the driver availability for path_event call
s390/module: fix building test_modules_helpers.o with clang
MAINTAINERS: downgrade myself to Reviewer for s390
MAINTAINERS: add Alexander Gordeev as maintainer for s390
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
If no driver is attached to a device or the driver does not provide the
path_event function, an FCES path-event on this device could end up in a
kernel-panic. Verify the driver availability before the path_event
function call.
Fixes: 32ef938815c1 ("s390/cio: Add support for FCES status notification")
Cc: stable@vger.kernel.org
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
