| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Don't bother with translating the SIGA-related capability bits into
our own internal format, just cache the full qdioac1 field instead.
Also adjust the helper macros so that they take a qdio_irq argument
and can be used everywhere, instead of taking a qdio_q and then
internally dereferencing the parent pointer.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The queue processing is fully decoupled from any preceding interrupt,
so we're no longer making any use of the sync-after-IRQ HW capabilities.
And as SIGA-sync is a legacy feature, there's also not much point in
re-designing the driver & qdio-layer code just so that we can
potentially avoid a few syncs. So just remove all the leftover code.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Clean up yet another path where HW wants an absolute address, and we've
been implicitly relying on V=R.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Introduce dev_busid, which exports the device-id associated with the
io-subchannel (and message-subchannel). The dev_busid indicates that of
the device which may be physically installed on the corrosponding
subchannel. The dev_busid value "none" indicates that the subchannel
is not valid, there is no I/O device currently associated with the
subchannel.
The dev_busid information would be helpful to write device-specific
udev-rules associated with the subchannel. The dev_busid interface would
be available even when the sch is not bound to any driver or if there is
no operational device connected on it. Hence this attribute can be used to
write udev-rules which are specific to the device associated with the
subchannel.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
This patch introduces a new rescan sys-interface for channel-subsystem.
The rescan interface allows the user to invoke an evaluation of all
subchannels defined in the I/O configuration.
The new rescan interface can be found at /sys/devices/css0/rescan
and can be triggered by,
echo > /sys/devices/css0/rescan
Writing to this interface triggers subchannel evaluation. The write
request completes only after scan-related work has completed
This user-invoked subchannel evaluation allows manual recovery in error
situations such as:
- restart of device discovery after resolution of temporary device
error
- inconsistent OS view of subchannel state due to missing state-change
interrupts (CRWs)
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The user can open multiple device FDs if it likes, however these open()
functions call vfio_register_notifier() on some device global
state. Calling vfio_register_notifier() twice in will trigger a WARN_ON
from notifier_chain_register() and the first close will wrongly delete the
notifier and more.
Since these really want the new open/close_device() semantics just change
the functions over.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/12-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
These macros haven't seen any use in a long time. Also note that the
queue_irqs_*() ones wouldn't even compile anymore.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
get_outbound_buffer_frontier() is only reached via qdio_inspect_queue(),
and there we already call qdio_siga_sync_q() unconditionally.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Both qdio drivers have moved away from using qdio's internal tasklet
and timer mechanisms for Output Queues. Rip out all the leftovers.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
If qdio_cancel_ccw() times out (or is interrupted) before the interrupt
for the {halt,clear} action arrives, report this back to the caller as
an error.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
If the ESTABLISH ccw fails (ie. the qdio_irq is set to
QDIO_IRQ_STATE_ERR), we don't need to call qdio_shutdown() for rolling
back our earlier actions. All the needed logic is already available in
qdio_establish()'s error chain, and using it means we don't have to
temporarily drop the setup_mutex either.
This makes qdio_shutdown() a purely external function, that should only
be called by the driver if an earlier qdio_establish() succeeded.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When the ESTABLISH ccw does not complete within the specified timeout,
try our best to cancel the ccw program that is still active on the
device. Otherwise the IO subsystem might be accessing it even after
the driver eg. called qdio_free().
Fixes: 779e6e1c724d ("[S390] qdio: new qdio driver.")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 2.6.27
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When qdio_establish() times out while waiting for the ESTABLISH ccw to
complete, it calls qdio_shutdown() to roll back all of its previous
actions. But at this point the qdio_irq's state is still
QDIO_IRQ_STATE_INACTIVE, so qdio_shutdown() will exit immediately
without doing any actual work.
Which means that eg. the qdio_irq's thinint-indicator stays registered,
and cdev->handler isn't restored to its old value. And since
commit 954d6235be41 ("s390/qdio: make thinint registration symmetric")
the qdio_irq also stays on the tiq_list, so on the next qdio_establish()
we might get a helpful BUG from the list-debugging code:
...
[ 4633.512591] list_add double add: new=00000000005a4110, prev=00000001b357db78, next=00000000005a4110.
[ 4633.512621] ------------[ cut here ]------------
[ 4633.512623] kernel BUG at lib/list_debug.c:29!
...
[ 4633.512796] [<00000001b2c6ee9a>] __list_add_valid+0x82/0xa0
[ 4633.512798] ([<00000001b2c6ee96>] __list_add_valid+0x7e/0xa0)
[ 4633.512800] [<00000001b2fcecce>] qdio_establish_thinint+0x116/0x190
[ 4633.512805] [<00000001b2fcbe58>] qdio_establish+0x128/0x498
...
Fix this by extracting a goto-chain from the existing error exits in
qdio_establish(), and check the return value of the wait_event_...()
to detect the timeout condition.
Fixes: 779e6e1c724d ("[S390] qdio: new qdio driver.")
Root-caused-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 2.6.27
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver core ignores the return value of scmdev_remove()
(because there is only little it can do when a device disappears).
So make it impossible for future drivers to return an unused error code
by changing the remove prototype to return void.
The real motivation for this change is the quest to make struct
bus_type::remove return void, too.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver core only calls a bus remove callback when there is a driver.
So dev->driver is never NULL and the check can safely be removed.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver core ignores the return value of css_remove()
(because there is only little it can do when a device disappears) and
all callbacks return 0 anyhow.
So make it impossible for future drivers to return an unused error code
by changing the remove prototype to return void.
The real motivation for this change is the quest to make struct
bus_type::remove return void, too.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit fb64de1bc36c ("s390/qeth: phase out OSN support") spelled out
why the OSN support in qeth is in a bad shape, and put any remaining
interested parties on notice to speak up before it gets ripped out.
It's 2021 now, so make true on that promise and remove all the
OSN-specific parts from qeth. This also means that we no longer need to
export various parts of the cmd & data path internals to the L2 driver.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Change remaining inline assemblies to also use symbolic names for
operands, use "Q" constraint when possible, and use "+" modifier so
that an operand needs to be specified only once.
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Currently css_wait_for_slow_path() gets called inside the chp->lock.
The path-verification-loop of slowpath inside this lock could lead to
deadlock as reported by the lockdep validator.
The ccw_device_get_chp_desc() during the instance of a device-set-online
would try to acquire the same 'chp->lock' to read the chp->desc.
The instance of this function can get called from multiple scenario,
like probing or setting-device online manually. This could, in some
corner-cases lead to the deadlock.
lockdep validator reported this as,
CPU0 CPU1
---- ----
lock(&chp->lock);
lock(kn->active#43);
lock(&chp->lock);
lock((wq_completion)cio);
The chp->lock was introduced to serialize the access of struct
channel_path. This lock is not needed for the css_wait_for_slow_path()
function, so invoke the slow-path function outside this lock.
Fixes: b730f3a93395 ("[S390] cio: add lock to struct channel_path")
Cc: <stable@vger.kernel.org>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
To avoid casting ptrace members, add a union containing
both struct tpi_info and explicit int_code/int_parm members.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
For future work we need the struct tpi_info declaration in asm/ptrace.h.
Due to circular dependencies it cannot stay in asm/lowcore.h or asm/cio.h,
which would be the preferred location. Therefore add it in its own header
file.
Also fix a typo in the length of a reserved field that did not have a
functional effect beyond an incorrect field value in the s390_cio_tpi
tracepoint.
Fixes: 2ab59de7c5ce ("s390/cio: Consolidate inline assemblies and related data definitions")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
ccwgroup_notifier() currently listens for BUS_NOTIFY_UNBIND_DRIVER
events, and triggers an ungrouping for the affected device.
Looking at __device_release_driver(), we can wait for a little longer
until the driver has been fully unbound and eg. bus->remove() has been
called. So listen for BUS_NOTIFY_UNBOUND_DRIVER instead. Due to locking
the current code should work just fine, but this clarifies our intent.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
driver_unregister() ends up calling __device_release_driver() for
each device that is bound to the driver. Thus ccwgroup_notifier() will
see a BUS_NOTIFY_UNBIND_DRIVER event for these ccwgroup devices, and
trigger the ungrouping.
So there's no need to also trigger the ungrouping from within
ccwgroup_driver_unregister(), remove it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Wiring up the cdevs is an essential part of the gdev creation. So
release them during the gdev destruction, ie. on the last put_device().
This could cause us to hold on to the cdevs a tiny bit longer, but
that's not a real concern.
As we have much less certainty of what context this put_device() is
executed from, switch to irqsave locking.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Today, the stacked call to vfio_ccw_sch_io_todo() does three things:
1) Update a solicited IRB with CP information, and release the CP
if the interrupt was the end of a START operation.
2) Copy the IRB data into the io_region, under the protection of
the io_mutex
3) Reset the vfio-ccw FSM state to IDLE to acknowledge that
vfio-ccw can accept more work.
The trouble is that step 3 is (A) invoked for both solicited and
unsolicited interrupts, and (B) sitting after the mutex for step 2.
This second piece becomes a problem if it processes an interrupt
for a CLEAR SUBCHANNEL while another thread initiates a START,
thus allowing the CP and FSM states to get out of sync. That is:
CPU 1 CPU 2
fsm_do_clear()
fsm_irq()
fsm_io_request()
vfio_ccw_sch_io_todo()
fsm_io_helper()
Since the FSM state and CP should be kept in sync, let's make a
note when the CP is released, and rely on that as an indication
that the FSM should also be reset at the end of this routine and
open up the device for more work.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210511195631.3995081-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
When an I/O request is made, the fsm_io_request() routine
moves the FSM state from IDLE to CP_PROCESSING, and then
fsm_io_helper() moves it to CP_PENDING if the START SUBCHANNEL
received a cc0. Yet, the error case to go from CP_PROCESSING
back to IDLE is done after the FSM call returns.
Let's move this up into the FSM proper, to provide some
better symmetry when unwinding in this case.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20210511195631.3995081-3-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
We have a really nice flag in the channel_program struct that
indicates if it had been initialized by cp_init(), and use it
as a guard in the other cp accessor routines, but not for a
duplicate call into cp_init(). The possibility of this occurring
is low, because that flow is protected by the private->io_mutex
and FSM CP_PROCESSING state. But then why bother checking it
in (for example) cp_prefetch() then?
Let's just be consistent and check for that in cp_init() too.
Fixes: 71189f263f8a3 ("vfio-ccw: make it safe to access channel programs")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20210511195631.3995081-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- add support for system call stack randomization
- handle stale PCI deconfiguration events
- couple of defconfig updates
- some fixes and cleanups
* tag 's390-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: fix detection of vector enhancements facility 1 vs. vector packed decimal facility
s390/entry: add support for syscall stack randomization
s390/configs: change CONFIG_VIRTIO_CONSOLE to "m"
s390/cio: remove invalid condition on IO_SCH_UNREG
s390/cpumf: remove call to perf_event_update_userpage
s390/cpumf: move counter set size calculation to common place
s390/cpumf: beautify if-then-else indentation
s390/configs: enable CONFIG_PCI_IOV
s390/pci: handle stale deconfiguration events
s390/pci: rename zpci_configure_device()
|
|
The condition to check the cdev pointer validity on
css_sch_device_unregister() is a leftover from the 'commit 8cc0dcfdc1c0
("s390/cio: remove pm support from ccw bus driver")'. This could lead to a
situation, where detaching the device is not happening completely. Remove
this invalid condition in the IO_SCH_UNREG case.
Link: https://lore.kernel.org/r/20210423100843.2230969-1-vneethv@linux.ibm.com
Fixes: 8cc0dcfdc1c0 ("s390/cio: remove pm support from ccw bus driver")
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Suggested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Tested-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Pull VFIO updates from Alex Williamson:
- Embed struct vfio_device into vfio driver structures (Jason
Gunthorpe)
- Make vfio_mdev type safe (Jason Gunthorpe)
- Remove vfio-pci NVLink2 extensions for POWER9 (Christoph Hellwig)
- Update vfio-pci IGD extensions for OpRegion 2.1+ (Fred Gao)
- Various spelling/blank line fixes (Zhen Lei, Zhou Wang, Bhaskar
Chowdhury)
- Simplify unpin_pages error handling (Shenming Lu)
- Fix i915 mdev Kconfig dependency (Arnd Bergmann)
- Remove unused structure member (Keqian Zhu)
* tag 'vfio-v5.13-rc1' of git://github.com/awilliam/linux-vfio: (43 commits)
vfio/gvt: fix DRM_I915_GVT dependency on VFIO_MDEV
vfio/iommu_type1: Remove unused pinned_page_dirty_scope in vfio_iommu
vfio/mdev: Correct the function signatures for the mdev_type_attributes
vfio/mdev: Remove kobj from mdev_parent_ops->create()
vfio/gvt: Use mdev_get_type_group_id()
vfio/gvt: Make DRM_I915_GVT depend on VFIO_MDEV
vfio/mbochs: Use mdev_get_type_group_id()
vfio/mdpy: Use mdev_get_type_group_id()
vfio/mtty: Use mdev_get_type_group_id()
vfio/mdev: Add mdev/mtype_get_type_group_id()
vfio/mdev: Remove duplicate storage of parent in mdev_device
vfio/mdev: Add missing error handling to dev_set_name()
vfio/mdev: Reorganize mdev_device_create()
vfio/mdev: Add missing reference counting to mdev_type
vfio/mdev: Expose mdev_get/put_parent to mdev_private.h
vfio/mdev: Use struct mdev_type in struct mdev_device
vfio/mdev: Simplify driver registration
vfio/mdev: Add missing typesafety around mdev_device
vfio/mdev: Do not allow a mdev_type to have a NULL parent pointer
vfio/mdev: Fix missing static's on MDEV_TYPE_ATTR's
...
|
|
The driver core standard is to pass in the properly typed object, the
properly typed attribute and the buffer data. It stems from the root
kobject method:
ssize_t (*show)(struct kobject *kobj, struct kobj_attribute *attr,..)
Each subclass of kobject should provide their own function with the same
signature but more specific types, eg struct device uses:
ssize_t (*show)(struct device *dev, struct device_attribute *attr,..)
In this case the existing signature is:
ssize_t (*show)(struct kobject *kobj, struct device *dev,..)
Where kobj is a 'struct mdev_type *' and dev is 'mdev_type->parent->dev'.
Change the mdev_type related sysfs attribute functions to:
ssize_t (*show)(struct mdev_type *mtype, struct mdev_type_attribute *attr,..)
In order to restore type safety and match the driver core standard
There are no current users of 'attr', but if it is ever needed it would be
hard to add in retroactively, so do it now.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <18-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The kobj here is a type-erased version of mdev_type, which is already
stored in the struct mdev_device being passed in. It was only ever used to
compute the type_group_id, which is now extracted directly from the mdev.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <17-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Use DECLARE_WAIT_QUEUE_HEAD to declare and statically initialize the
work_queue_head_t.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
wait_queue_head_t can be initialized automatically with
DECLARE_WAIT_QUEUE_HEAD() rather than explicitly calling
init_waitqueue_head().
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
static spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
We are spending way too much effort on qdio-internal bookkeeping for
QAOB management & caching, and it's still not robust. Once qdio's
TX path has detached the QAOB from a PENDING buffer, we lost all
track of it until it shows up in a CQ notification again. So if the
device is torn down before that notification arrives, we leak the QAOB.
Just have the driver take care of it, and simply pass down a QAOB if
they want a TX with async-completion capability. For a buffer in PENDING
state that requires the QAOB for final completion, qeth can now also try
to recycle the buffer's QAOB rather than unconditionally freeing it.
This also eliminates the qdio_outbuf_state array, which was only needed
to transfer the aob->user1 tag from the driver to the qdio layer.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
This patch introduces the mechanism to inject artificial events to the
CIO layer.
One of the main-event type which triggers the CommonIO operations are
Channel Report events. When a malfunction or other condition affecting
channel-subsystem operation is recognized, a Channel Report Word
(consisting of one or more CRWs) describing the condition is made
pending for retrieval and analysis by the program. The CRW contains
information concerning the identity and state of a facility following
the detection of the malfunction or other condition.
The patch introduces two debugfs interfaces which can be used to inject
'artificial' events from the userspace. It is intended to provide an easy
means to increase the test coverage for CIO code. And this functionality
can be enabled via a new configuration option CONFIG_CIO_INJECT.
The newly introduces debugfs interfaces can be used as mentioned below
to generate different fake-events. To use the crw_inject, first we should
enable it by using enable_inject interface.
i.e
echo 1 > /sys/kernel/debug/s390/cio/enable_inject
After the first step, user can simulate CRW as follows:
echo <solicited> <overflow> <chaining> <rsc> <ancillary> <erc> <rsid> \
> /sys/kernel/debug/s390/cio/crw_inject
Example:
A permanent error ERC on CHPID 0x60 would look like this:
echo 0 0 0 4 0 6 0x60 > /sys/kernel/debug/s390/cio/crw_inject
and an initialized ERC on the same CHPID:
echo 0 0 0 4 0 2 0x60 > /sys/kernel/debug/s390/cio/crw_inject
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
This patch introduces an s390 Common I/O layer debugfs directory that is
intended to provide access to debugging-related CIO functions and data.
The directory is created as /sys/kernel/debug/s390/cio
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Fixes: 120e214e504f ("vfio: ccw: realize VFIO_DEVICE_G(S)ET_IRQ_INFO ioctls")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The copy_to_user() function returns the number of bytes remaining to be
copied, but we want to return -EFAULT if the copy doesn't complete.
Fixes: e01bcdd61320 ("vfio: ccw: realize VFIO_DEVICE_GET_REGION_INFO ioctl")
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/1614600093-13992-1-git-send-email-wangqing@vivo.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Get rid of unsigned long long, and use unsigned long instead
everywhere. The usage of unsigned long long is a leftover from
31 bit kernel support.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
For non-QEBSM devices, get_buf_states() merges PENDING and EMPTY buffers
into a single group of finished buffers. To allow the upper-layer driver
to differentiate between the two states, qdio_check_pending() looks at
each buffer's state again and sets the sbal_state flag to
QDIO_OUTBUF_STATE_FLAG_PENDING accordingly.
So effectively we're spending overhead on _every_ Output Queue
inspection, just to avoid some additional TX completion calls in case
a group of buffers has completed with mixed EMPTY / PENDING state.
Given that PENDING buffers should rarely occur, this is a bad trade-off.
In particular so as the additional checks in get_buf_states() affect
_all_ device types (even those that don't use the PENDING state).
Rip it all out, and just report the PENDING completions separately as
we already do for QEBSM devices.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
For QEBSM devices the 'merge_pending' mechanism in get_buf_states()
doesn't apply, and we can actually get SLSB_P_OUTPUT_PENDING returned.
So for this case propagating the PENDING state to the driver via the
queue's sbal_state doesn't make sense and creates unnecessary overhead.
Instead introduce a new QDIO_ERROR_* flag that gets passed to the
driver, and triggers the same processing as if the buffers were flagged
as QDIO_OUTBUF_STATE_FLAG_PENDING.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
When inspecting a queue, any error is currently returned back through
the queue's qdio_error field. Turn this into a proper variable that gets
passed through the call chain, so that the lifetime is clear and the
error state can be accessed along the way.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
We don't kick the handler for Input Queues anymore. Move the remaining
code into its only caller.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
