summaryrefslogtreecommitdiff
path: root/drivers/s390/char/sclp_cmd.c
AgeCommit message (Collapse)AuthorFilesLines
2013-05-13s390/memory hotplug: prevent offline of active memory incrementsHeiko Carstens1-1/+3
commit 94c163663fc1dcfc067a5fb3cc1446b9469975ce upstream. In case a machine supports memory hotplug all active memory increments present at IPL time have been initialized with a "usecount" of 1. This is wrong if the memory increment size is larger than the memory section size of the memory hotplug code. If that is the case the usecount must be initialized with the number of memory sections that fit into one memory increment. Otherwise it is possible to put a memory increment into standby state even if there are still active sections. Afterwards addressing exceptions might happen which cause the kernel to panic. However even worse, if a memory increment was put into standby state and afterwards into active state again, it's contents would have been zeroed, leading to memory corruption. This was only an issue for machines that support standby memory and have at least 256GB memory. This is broken since commit fdb1bb15 "[S390] sclp/memory hotplug: fix initial usecount of increments". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2011-10-30[S390] cleanup psw related bits and piecesMartin Schwidefsky1-2/+2
Split out addressing mode bits from PSW_BASE_BITS, rename PSW_BASE_BITS to PSW_MASK_BASE, get rid of psw_user32_bits, remove unused function enabled_wait(), introduce PSW_MASK_USER, and drop PSW_MASK_MERGE macros. Change psw_kernel_bits / psw_user_bits to contain only the bits that are always set in the respective mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-08-24[S390] memory hotplug: only unassign assigned incrementsHeiko Carstens1-2/+4
Make sure that only assigned storage increments are unassigned when attaching a storage element. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-10[S390] sclp/memory hotplug: fix initial usecount of incrementsHeiko Carstens1-0/+2
Fix initial usecount of attached and assigned storage increments so they can be set offline. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-24[S390] sclp: avoid 64 bit divisionHeiko Carstens1-7/+7
Avoid 64 bit division to fix this compile error on 32 bit: drivers/s390/char/sclp_cmd.c:711: undefined reference to `__udivdi3' Also move the whole arch_get_memory_phys_device function to the memory hotplug related functions. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-18memory hotplug/s390: set phys_deviceHeiko Carstens1-0/+7
Implement arch specific arch_get_memory_phys_device function and initialize phys_device for each memory section. That way we finally can tell which piece of memory belongs to which physical device. This makes s390's /sys/devices/system/memory/memoryX/phys_device display the correct thing? Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15const: constify remaining dev_pm_opsAlexey Dobriyan1-1/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-07[S390] sclp: improve servicability settingMartin Schwidefsky1-0/+1
Set dump indicator on read-scp-info command to get meaningful dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: memory hotplug power management callbacksGerald Schaefer1-4/+38
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-02-19[S390] fix "mem=" handling in case of standby memoryHeiko Carstens1-0/+5
Standby memory detected with the sclp interface gets always registered with add_memory calls without considering the limitationt that the "mem=" kernel paramater implies. So fix this and only register standby memory that is below the specified limit. This fixes zfcpdump since it uses "mem=32M". In case there is appr. 2GB standby memory present all of usable memory would be used for the struct pages needed for standby memory. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert sclp printks to pr_xxx macros.Martin Schwidefsky1-13/+16
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-11-14[S390] sclp: emit error message if assign storage failsHeiko Carstens1-0/+3
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-01[S390] Add support for memory hot-remove.Gerald Schaefer1-0/+5
This patch enables memory hot-remove on s390. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-07-14[S390] Move memory detection code to own file.Heiko Carstens1-15/+18
Move memory detection code to own file and also simplify it. Also add an interface which can be called at any time to get the current memory layout. This interface is needed by our kernel internal system dumper. Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Cc: Michael Holzheu <holzheu@de.ibm.com> Cc: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-07-14[S390] Add support for memory hot-add via sclp.Heiko Carstens1-8/+308
Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Get rid of additional_cpus kernel parameter.Heiko Carstens1-44/+2
It caused only a lot of confusion. From now on cpu hotplug of up to NR_CPUS will work by default. If somebody wants to limit that then the possible_cpus parameter can be used. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] sclp: convert channel path configure code to use sync interface.Heiko Carstens1-1/+122
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Standby cpu activation/deactivation.Heiko Carstens1-0/+319
Add a new interface so that cpus can be put into standby state and configured state. Only offline cpus can be put into standby state or configured state. For that the new percpu sysfs attribute "configure" must be used. To put a cpu in standby state a "0" must be written to the attribute. In order to switch it into configured state a "1" must be written to the attribute. Only cpus in configured state can be brought online. In addition this patch introduces a static mapping of physical to logical cpus. As a result only the sysfs directories of present cpus will be created. To scan for new cpus the new sysfs attribute "rescan" must be used. Writing to /sys/devices/system/cpu/rescan will trigger a rescan of cpus and will create directories for new cpus. On IPL only configured cpus will be used. And on reboot/shutdown all cpus will remain in their current state (configured/standby). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-23 04:08:45 +0300