summaryrefslogtreecommitdiff
path: root/drivers/rtc
AgeCommit message (Collapse)AuthorFilesLines
2010-08-05Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds3-1/+358
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (150 commits) MIPS: PowerTV: Separate PowerTV USB support from non-USB code MIPS: strip the un-needed sections of vmlinuz MIPS: Clean up the calculation of VMLINUZ_LOAD_ADDRESS MIPS: Clean up arch/mips/boot/compressed/decompress.c MIPS: Clean up arch/mips/boot/compressed/ld.script MIPS: Unify the suffix of compressed vmlinux.bin MIPS: PowerTV: Add Gaia platform definitions. MIPS: BCM47xx: Fix nvram_getenv return value. MIPS: Octeon: Allow more than 3.75GB of memory with PCIe MIPS: Clean up notify_die() usage. MIPS: Remove unused task_struct.trap_no field. Documentation: Mention that KProbes is supported on MIPS SAMPLES: kprobe_example: Make it print something on MIPS. MIPS: kprobe: Add support. MIPS: Add instrunction format for BREAK and SYSCALL MIPS: kprobes: Define regs_return_value() MIPS: Ritually kill stupid printk. MIPS: Octeon: Disallow MSI-X interrupt and fall back to MSI interrupts. MIPS: Octeon: Support 256 MSI on PCIe MIPS: Decode core number for R2 CPUs. ...
2010-08-05RTC: Add JZ4740 RTC driverLars-Peter Clausen3-0/+357
Add support for the RTC unit on JZ4740 SoCs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: rtc-linux@googlegroups.com Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Alessandro Zummo <a.zummo@towertech.it>, Patchwork: https://patchwork.linux-mips.org/patch/1424/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Alchemy: remove SOC_AU1X00 in favor of MIPS_ALCHEMYManuel Lauss1-1/+1
Remove the CONFIG_SOC_AU1X00 Kconfig symbol since its job can also be done by MACH_ALCHEMY, now renamed to MIPS_ALCHEMY. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/1461/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-04Merge branch 'master' into for-nextJiri Kosina4-6/+21
2010-07-31Merge branch 'misc' into develRussell King1-1/+1
Conflicts: arch/arm/mm/init.c
2010-07-28drivers/rtc/rtc-rx8581.c: fix setdatetimeRudolf Marek1-3/+17
Fix the logic while writing new date/time to the chip. The driver incorrectly wrote back register values to different registers and even with wrong mask. The patch adds clearing of the VLF register, which should be cleared if all date/time values are set. Signed-off-by: Rudolf Marek <rudolf.marek@sysgo.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Martyn Welch <martyn.welch@gefanuc.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-27ARM: Fix section build warnings for AMBA driversRussell King1-1/+1
Found in the Versatile build: WARNING: drivers/built-in.o(.data+0x14c): Section mismatch in reference from the variable pl061_gpio_driver to the (unknown reference) .init.data:(unknown) The variable pl061_gpio_driver references the (unknown reference) __initdata (unknown) WARNING: drivers/built-in.o(.data+0x40f8): Section mismatch in reference from the variable pl011_driver to the (unknown reference) .init.data:(unknown) The variable pl011_driver references the (unknown reference) __initdata (unknown) WARNING: drivers/built-in.o(.data+0x5ab4): Section mismatch in reference from the variable pl031_driver to the (unknown reference) .init.data:(unknown) The variable pl031_driver references the (unknown reference) __initdata (unknown) Basically, amba_id structures must not be __initdata. Also fix: WARNING: drivers/built-in.o(.data+0x138): Section mismatch in reference from the variable pl061_gpio_driver to the function .init.text:pl061_probe() The variable pl061_gpio_driver references the function __init pl061_probe() which is an incorrectly annotated probe function. Fix it to reflect the other AMBA bus probe functions by removing the __init attributation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-19comment typo fixes: charater => characterThomas Weber1-1/+1
Fix typo in comments. Replace charater with character. Characteristics too. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-30rtc: fix ds1388 time corruptionJoakim Tjernlund1-2/+2
The ds1307 driver misreads the ds1388 registers when checking for 12 or 24 hour mode. Instead of checking the hour register it reads the minute register. Therefore the driver thinks minutes >= 40 has the 12HR bit set and resets the minute register by zeroing the high bits. This results in minutes are reset to 0-9, jumping back in time 40 or 50 minutes. The time jump is also written back to the RTC. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-28davinci: update gfp/slab.h includesTejun Heo1-0/+1
Implicit slab.h inclusion via percpu.h is about to go away. Make sure gfp.h or slab.h is included as necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2010-06-16Merge branch 'master' into for-nextJiri Kosina15-188/+639
2010-06-16fix typos concerning "instead"Uwe Kleine-König1-1/+1
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-05rtc: s3c: initialize s3c_rtc_cpu_type before using itMaurus Cuelenaere1-2/+2
Make sure s3c_rtc_cpu_type is initialised _before_ it's used in an if() check. Reported-by: Jiri Pinkava <jiri.pinkava@vscht.cz> Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-05rtc: s3c: initialize driver data before using itMaurus Cuelenaere1-2/+3
s3c_rtc_setfreq() uses the platform driver data to derive struct rtc_device, so make sure drvdata is set _before_ s3c_rtc_setfreq() is called. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Maurus Cuelenaere <mcuelenaere@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-04Merge branch 'i2c-for-linus' of ↵Linus Torvalds3-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Remove all i2c_set_clientdata(client, NULL) in drivers i2c/busses: Move two drivers to embedded section i2c: Rename i2c_check_addr to i2c_check_addr_busy i2c: Document reserved I2C addresses i2c: Check for address validity on client registration i2c: Share the I2C device presence detection code Documentation/i2c: Checkpatch cleanup
2010-06-03i2c: Remove all i2c_set_clientdata(client, NULL) in driversWolfram Sang3-6/+0
I2C drivers can use the clientdata-pointer to point to private data. As I2C devices are not really unregistered, but merely detached from their driver, it used to be the drivers obligation to clear this pointer during remove() or a failed probe(). As a couple of drivers forgot to do this, it was agreed that it was cleaner if the i2c-core does this clearance when appropriate, as there is no guarantee for the lifetime of the clientdata-pointer after remove() anyhow. This feature was added to the core with commit e4a7b9b04de15f6b63da5ccdd373ffa3057a3681 to fix the faulty drivers. As there is no need anymore to clear the clientdata-pointer, remove all current occurrences in the drivers to simplify the code and prevent confusion. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-06-03of/rtc: rtc-mpc5121.c: Fix build failuresGrant Likely1-6/+8
Fixes build errors caused by the: - OF device_node pointer being moved into struct device - removal of the match_table field from struct of_platform_driver Signed-off-by: Grant Likely <grant.likely@secretlab.ca> CC: Paul Gortmaker <p_gortmaker@yahoo.com> CC: Alessandro Zummo <a.zummo@towertech.it> CC: Wolfgang Denk <wd@denx.de> CC: Tejun Heo <tj@kernel.org> CC: Anatolij Gustschin <agust@denx.de> CC: rtc-linux@googlegroups.com CC: devicetree-discuss@lists.ozlabs.org
2010-05-28mfd: AB3100 register access change to abx500 APIMattias Wallin1-23/+16
The interface for the AB3100 is changed to make way for the ABX500 family of chips: AB3550, AB5500 and future ST-Ericsson Analog Baseband chips. The register access functions are moved out to a separate struct abx500_ops. In this way the interface is moved from the implementation and the sub functionality drivers can keep their interface intact when chip infrastructure and communication mechanisms changes. We also define the AB3550 device IDs and the AB3550 platform data struct and convert the catenated 32bit event to an array of 3 x 8bits. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: Renamed ab3100.h to abx500.hLinus Walleij1-1/+1
The goal here is to make way for a more general interface for the analog baseband chips ab3100 ab3550 ab550 and future chips. This patch have been divided into two parts since both changing name and content of a file is not recommended in git. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-27rtc-m41t80: use nonseekable_open()Jan Blunck1-5/+1
Use nonseekable_open() for this since seeking is not supported anyway. Signed-off-by: Jan Blunck <jblunck@suse.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27rtc: AB8500 RTC driverVirupax Sadashivpetimath3-0/+371
Add a driver for the RTC on the AB8500 power management chip. This is a client of the AB8500 MFD driver. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25rtc: use genirq directly in rtc-wm831xMark Brown1-8/+8
Now that the WM831x core uses genirq for the IRQ controller there is no need to use the WM831x-specific wrappers to request interrupts so convert to use genirq directly. Also use more meaningful strings to make /proc/interrupts more readily legible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25rtc-cmos: do dev_set_drvdata() earlier in the initializationDan Carpenter1-2/+3
The bug is an oops when dev_get_drvdata() returned null in cmos_update_irq_enable(). The call tree looks like this: rtc_dev_ioctl() => rtc_update_irq_enable() => cmos_update_irq_enable() It's caused by a race condition in the module initialization. It is rtc_device_register() which makes the ioctl operations live so I moved the call to dev_set_drvdata() before the call to rtc_device_register(). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=15963 Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Dan Carpenter <error27@gmail.com> Tested-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Malte Schroder <maltesch@gmx.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25rtc-ds1302: add some abstraction for new platform supportMarc Zyngier1-18/+67
The current ds1302 driver (or at least the one that lives in /drivers/rtc) seems to be designed for memory mapped devices only. This make it quite hard to add support for GPIO-based implementations (as this is the case for the upcoming Arcom Vulcan). This patch moves the direct register access to inline functions with explicit names. Still not as good as a proper platform driver, but at least neater. Signed-off-by: Marc Zyngier <maz@misterjones.org> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25rtc-isl1208: use sysfs_{create/remove}_groupH Hartley Sweeten1-34/+11
Instead of individually creating and removing the sysfs device attribute files, wrap them in an attribute_group and use sysfs_{create/remove}_group. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25rtc-mxc: remove unnecessary clock source for rtc subsystemVladimir Zapolskiy1-17/+8
On imx SoCs rtc clock parent is CKIL, but clock rate shall be determined using rtc clock itself, that eliminates CKIL clock usage in the driver. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <daniel@caiaq.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25s3c rtc driver: add support for S3C64xxMaurus Cuelenaere2-21/+88
Add support for the S3C64xx SoC to the generic S3C RTC driver. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Cc: Frans Pop <elendil@planet.nl> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24Merge branch 'bkl/ioctl' of ↵Linus Torvalds1-2/+14
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'bkl/ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: uml: Pushdown the bkl from harddog_kern ioctl sunrpc: Pushdown the bkl from sunrpc cache ioctl sunrpc: Pushdown the bkl from ioctl autofs4: Pushdown the bkl from ioctl uml: Convert to unlocked_ioctls to remove implicit BKL ncpfs: BKL ioctl pushdown coda: Clean-up whitespace problems in pioctl.c coda: BKL ioctl pushdown drivers: Push down BKL into various drivers isdn: Push down BKL into ioctl functions scsi: Push down BKL into ioctl functions dvb: Push down BKL into ioctl functions smbfs: Push down BKL into ioctl function coda/psdev: Remove BKL from ioctl function um/mmapper: Remove BKL usage sn_hwperf: Kill BKL usage hfsplus: Push down BKL into ioctl function
2010-05-22RTC: rtc-cmos: Fix binary mode supportArnaud Patard1-43/+40
As a follow-up to the thread about RTC support for some Loongson 2E/2F boards, this patch tries to address the "REVISIT"/"FIXME" comments about rtc binary mode handling and allow rtc to work with rtc in binary mode. I've also raised the message about 24-h mode not supported to warning otherwise, one may end up with no rtc without any message in the kernel log. Signed-off-by: Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org To: rtc-linux@googlegroups.com Cc: david-b@pacbell.net Cc: a.zummo@towertech.it Cc: akpm@linux-foundation.org Patchwork: http://patchwork.linux-mips.org/patch/1158/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21sysfs: add struct file* to bin_attr callbacksChris Wright9-20/+28
This allows bin_attr->read,write,mmap callbacks to check file specific data (such as inode owner) as part of any privilege validation. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20Merge branch 'for-linus' of ↵Linus Torvalds2-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits) vlynq: make whole Kconfig-menu dependant on architecture add descriptive comment for TIF_MEMDIE task flag declaration. EEPROM: max6875: Header file cleanup EEPROM: 93cx6: Header file cleanup EEPROM: Header file cleanup agp: use NULL instead of 0 when pointer is needed rtc-v3020: make bitfield unsigned PCI: make bitfield unsigned jbd2: use NULL instead of 0 when pointer is needed cciss: fix shadows sparse warning doc: inode uses a mutex instead of a semaphore. uml: i386: Avoid redefinition of NR_syscalls fix "seperate" typos in comments cocbalt_lcdfb: correct sections doc: Change urls for sparse Powerpc: wii: Fix typo in comment i2o: cleanup some exit paths Documentation/: it's -> its where appropriate UML: Fix compiler warning due to missing task_struct declaration UML: add kernel.h include to signal.c ...
2010-05-19Revert "rtc: omap: let device wakeup capability be configured from chip init ↵Kevin Hilman1-7/+5
logic" This reverts commit 9c0a342c45b2d98209ac473ea7a429ddd5c1b473 because it was included without proper signoffs from RTC maintainers.
2010-05-17drivers: Push down BKL into various driversArnd Bergmann1-2/+14
These are the last remaining device drivers using the ->ioctl file operation in the drivers directory (except from v4l drivers). [fweisbec: drop i8k pushdown as it has been done from procfs pushdown branch already] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-05-07rtc: omap: let device wakeup capability be configured from chip init logicSekhar Nori1-5/+7
The rtc-omap driver currently hardcodes the RTC wakeup capability to be "not capable". While this seems to be true for existing OMAP1 boards which are not wired for this, the DA850/OMAP-L138 SoC, the RTC can always be wake up source from its "deep sleep" mode. This patch lets the wakeup capability to be set from platform data and does not override the setting from the driver. For DA850/OMAP-L138, this is done from arch/arm/mach-davinci/devices-da8xx.c:da8xx_register_rtc() Note that this patch does not change the behavior on any existing OMAP1 board since the platform device registration sets the wakeup capability to 0 by default. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-07RTC: DaVinci RTC driverMiguel Aguilar3-0/+684
This driver features: * Alarm support. * Periodic interrupt by using a timer include into the RTC module. * The update interrupt is not supported by this RTC module. This driver was tested on a DM365 EVM by using the rtc-test application from the Documentation/rtc.txt. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it>
2010-04-23Merge branch 'master' into for-nextJiri Kosina43-23/+70
2010-04-14stk17ta8: renaming e-mail corrections following split of GE Fanuc joint ventureMartyn Welch1-2/+2
This patch corrects author and copyright notices in the stk17ta8 driver following the split-up of the GE Fanuc joint venture. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Acked-by: Thomas Hommel <thomas.hommel@ge.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-14rtc: e-mail corrections following split of GE Fanuc joint ventureMartyn Welch1-3/+3
This patch corrects author and copyright notices following the split-up of the GE Fanuc joint venture. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-07rtc-mxc: multiple fixes in rtc-mxc probe methodVladimir Zapolskiy1-13/+13
On exit paths in mxc_rtc_probe() method some resources are not freed correctly. This patch fixes: * unrequested memory region containing imx RTC registers * iounmap() isn't called on exit_free_pdata branch * clock get rate is called for freed clock source * clock isn't disabled on exit_put_clk branch To simplify the fix managed device resources are used. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo43-0/+43
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-25rtc/mc13783: fix use after free bugUwe Kleine-König1-10/+13
This was introduced by v2.6.34-rc1~38: 4c014e8 (rtc/mc13783: protect rtc {,un}registration by mc13783 lock) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-15init dynamic bin_attribute structuresWolfram Sang1-0/+1
Commit 6992f5334995af474c2b58d010d08bc597f0f2fe ("sysfs: Use one lockdep class per sysfs attribute.") introduced this requirement. First, at25 was fixed manually. Then, other occurences were found with coccinelle and the following semantic patch. Results were reviewed and fixed up: @ init @ identifier struct_name, bin; @@ struct struct_name { ... struct bin_attribute bin; ... }; @ main extends init @ expression E; statement S; identifier name, err; @@ ( struct struct_name *name; | - struct struct_name *name = NULL; + struct struct_name *name; ) ... ( sysfs_bin_attr_init(&name->bin); | + sysfs_bin_attr_init(&name->bin); if (sysfs_create_bin_file(E, &name->bin)) S | + sysfs_bin_attr_init(&name->bin); err = sysfs_create_bin_file(E, &name->bin); ) Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-13rtc/hctosys: only claim the RTC provided the system time if it didUwe Kleine-König2-27/+37
Without this patch /sys/class/rtc/$CONFIG_RTC_HCTOSYS_DEVICE/hctosys contains a 1 (meaning "This rtc was used to initialize the system clock") even if reading the time at bootup failed. Moreover change error handling in rtc_hctosys() to use goto and so reduce the indention level. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-08rtc: Enable rtc in max8925Haojian Zhuang3-0/+325
MAX8925 is a PMIC that contains RTC component. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-08rtc: Suppress duplicate enable/disable of WM8350 update interruptMark Brown1-0/+7
Unlike the wm8350-custom code genirq nests enable and disable calls so we can't just unconditionally mask or unmask the interrupt, we need to remember the state we set and only mask or unmask when there is a real change. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: rtc-linux@googlegroups.com Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-08mfd: Add a data argument to the WM8350 IRQ free functionMark Brown1-2/+2
To better match genirq. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-06rtc-coh901331: fix braces in resume codeJames Hogan1-2/+3
The else part of the if statement is indented but does not have braces around it. It clearly should since it uses clk_enable and clk_disable which are supposed to balance. Signed-off-by: James Hogan <james@albanarts.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06rtc/mc13783: implement alarmUwe Kleine-König1-13/+172
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06rtc/mc13783: protect rtc {,un}registration by mc13783 lockUwe Kleine-König1-11/+14
This is to protect from interrupt handlers using an unregistered rtc device. To assert that the reset irq is considered now before the rtc is registered the corresponding status is checked before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06rtc/mc13783: don't use deprecated mc13783 API callsUwe Kleine-König1-5/+5
mc13783_ackirq, mc13783_unmask and mc13783_mask are deprecated, use the drop in replacements with the nicer names. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 10:22:54 +0300