summaryrefslogtreecommitdiff
path: root/drivers/rtc
AgeCommit message (Collapse)AuthorFilesLines
2018-02-13rtc: set the alarm to the next expiring timerAlexandre Belloni1-1/+1
commit 74717b28cb32e1ad3c1042cafd76b264c8c0f68d upstream. If there is any non expired timer in the queue, the RTC alarm is never set. This is an issue when adding a timer that expires before the next non expired timer. Ensure the RTC alarm is set in that case. Fixes: 2b2f5ff00f63 ("rtc: interface: ignore expired timers when enqueuing new timers") Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> [bwh: Backported to 3.2: open-code ktime_before()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2018-02-13rtc: interface: ignore expired timers when enqueuing new timersColin Ian King1-1/+15
commit 2b2f5ff00f63847d95adad6289bd8b05f5983dd5 upstream. This patch fixes a RTC wakealarm issue, namely, the event fires during hibernate and is not cleared from the list, causing hwclock to block. The current enqueuing does not trigger an alarm if any expired timers already exist on the timerqueue. This can occur when a RTC wake alarm is used to wake a machine out of hibernate and the resumed state has old expired timers that have not been removed from the timer queue. This fix skips over any expired timers and triggers an alarm if there are no pending timers on the timerqueue. Note that the skipped expired timer will get reaped later on, so there is no need to clean it up immediately. The issue can be reproduced by putting a machine into hibernate and waking it with the RTC wakealarm. Running the example RTC test program from tools/testing/selftests/timers/rtctest.c after the hibernate will block indefinitely. With the fix, it no longer blocks after the hibernate resume. BugLink: http://bugs.launchpad.net/bugs/1333569 Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2017-11-11drivers/rtc/rtc-m41t80.c: remove disabled alarm functionalityPaul Bolle1-153/+4
commit 48e9766726ebb8f5d98823fe6b32dff570bc04d8 upstream. Commit c3b79770e51a ("rtc: m41t80: Workaround broken alarm functionality") disabled m41t80's alarm functions. But since those functions were not touched, building this driver triggers these GCC warnings: drivers/rtc/rtc-m41t80.c:216:12: warning: 'm41t80_rtc_alarm_irq_enable' defined but not used [-Wunused-function] drivers/rtc/rtc-m41t80.c:238:12: warning: 'm41t80_rtc_set_alarm' defined but not used [-Wunused-function] drivers/rtc/rtc-m41t80.c:308:12: warning: 'm41t80_rtc_read_alarm' defined but not used [-Wunused-function] Remove these functions (and the commented out references to them) to silence these warnings. Anyone wanting to fix the alarm irq functionality can easily find the removed code in the git log of this file or through some web searches. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2017-10-12rtc: rtc-nuc900: fix loop timeout testDan Carpenter1-1/+1
commit d0a67c372df410b579197ea818596001fe20070d upstream. We should change this post-op to a pre-op because we want the loop to exit with "timeout" set to zero. Fixes: 0a89b55364e0 ("nuc900/rtc: change the waiting for device ready implement") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-05-01rtc: vr41xx: Wire up alarm_irq_enableGeert Uytterhoeven1-6/+7
commit a25f4a95ec3cded34c1250364eba704c5e4fdac4 upstream. drivers/rtc/rtc-vr41xx.c:229: warning: ‘vr41xx_rtc_alarm_irq_enable’ defined but not used Apparently the conversion to alarm_irq_enable forgot to wire up the callback. Fixes: 16380c153a69c378 ("RTC: Convert rtc drivers to use the alarm_irq_enable method") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-07-11rtc: rtc-at91rm9200: fix infinite wait for ACKUPD irqBoris BREZILLON1-2/+14
commit 2fe121e1f5aa3bf31b418a9790db6c400e922291 upstream. The rtc user must wait at least 1 sec between each time/calandar update (see atmel's datasheet chapter "Updating Time/Calendar"). Use the 1Hz interrupt to update the at91_rtc_upd_rdy flag and wait for the at91_rtc_wait_upd_rdy event if the rtc is not ready. This patch fixes a deadlock in an uninterruptible wait when the RTC is updated more than once every second. AFAICT the bug is here from the beginning, but I think we should at least backport this fix to 3.10 and the following longterm and stable releases. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Reported-by: Bryan Evenson <bevenson@melinkcorp.com> Tested-by: Bryan Evenson <bevenson@melinkcorp.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: - Adjust context - at91_rtc_write() is called at91_sys_write() - Use at91_sys_write() directly instead of the missing at91_rtc_write_ier() and at91_rtc_write_idr()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-04-02rtc-cmos: Add an alarm disable quirkBorislav Petkov1-1/+51
commit d5a1c7e3fc38d9c7d629e1e47f32f863acbdec3d upstream. 41c7f7424259f ("rtc: Disable the alarm in the hardware (v2)") added the functionality to disable the RTC wake alarm when shutting down the box. However, there are at least two b0rked BIOSes we know about: https://bugzilla.novell.com/show_bug.cgi?id=812592 https://bugzilla.novell.com/show_bug.cgi?id=805740 where, when wakeup alarm is enabled in the BIOS, the machine reboots automatically right after shutdown, regardless of what wakeup time is programmed. Bisecting the issue lead to this patch so disable its functionality with a DMI quirk only for those boxes. Cc: Brecht Machiels <brecht@mos6581.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Borislav Petkov <bp@suse.de> [jstultz: Changed variable name for clarity, added extra dmi entry] Tested-by: Brecht Machiels <brecht@mos6581.org> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-01-03drivers/rtc/rtc-at91rm9200.c: correct alarm over day/month wrapLinus Pizunski1-0/+2
commit eb3c227289840eed95ddfb0516046f08d8993940 upstream. Update month and day of month to the alarm month/day instead of current day/month when setting the RTC alarm mask. Signed-off-by: Linus Pizunski <linus@narrativeteam.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-07-27drivers/rtc/rtc-rv3029c2.c: fix disabling AIE irqAxel Lin1-1/+1
commit 29ecd78c0fd6ee05f2c6b07b23823a6ae43c13ff upstream. In the disable AIE irq code path, current code passes "1" to enable parameter of rv3029c2_rtc_i2c_alarm_set_irq(). Thus it does not disable AIE irq. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-06-19drivers/rtc/rtc-twl.c: fix missing device_init_wakeup() when booted with ↵Tony Lindgren1-0/+1
device tree commit 24b8256a1fb28d357bc6fa09184ba29b4255ba5c upstream. When booted in legacy mode device_init_wakeup() gets called by drivers/mfd/twl-core.c when the children are initialized. However, when booted using device tree, the children are created with of_platform_populate() instead add_children(). This means that the RTC driver will not have device_init_wakeup() set, and we need to call it from the driver probe like RTC drivers typically do. Without this we cannot test PM wake-up events on omaps for cases where there may not be any physical wake-up event. Signed-off-by: Tony Lindgren <tony@atomide.com> Reported-by: Kevin Hilman <khilman@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-05-30drivers/rtc/rtc-pcf2123.c: fix error return code in pcf2123_probe()Wei Yongjun1-0/+1
commit 35623715818dfa720cccf99cd280dcbb4b78da23 upstream. Fix to return -ENODEV in the chip not found error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-05-13drivers/rtc/rtc-cmos.c: don't disable hpet emulation on suspendDerek Basehore1-2/+2
commit e005715efaf674660ae59af83b13822567e3a758 upstream. There's a bug where rtc alarms are ignored after the rtc cmos suspends but before the system finishes suspend. Since hpet emulation is disabled and it still handles the interrupts, a wake event is never registered which is done from the rtc layer. This patch reverts commit d1b2efa83fbf ("rtc: disable hpet emulation on suspend") which disabled hpet emulation. To fix the problem mentioned in that commit, hpet_rtc_timer_init() is called directly on resume. Signed-off-by: Derek Basehore <dbasehore@chromium.org> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-06drivers/rtc/rtc-pl031.c: restore ST variant functionalityLinus Walleij1-1/+3
commit 3399cfb5df9594495b876d1843a7165f77366b2b upstream. Commit e7e034e18a0a ("drivers/rtc/rtc-pl031.c: fix the missing operation on enable") accidentally broke the ST variants of PL031. The bit that is being poked as "clockwatch" enable bit for the ST variants does the work of bit 0 on this variant. Bit 0 is used for a clock divider on the ST variants, and setting it to 1 will affect timekeeping in a very bad way. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-02-20drivers/rtc/rtc-pl031.c: fix the missing operation on enableHaojian Zhuang1-3/+5
commit e7e034e18a0ab6bafb2425c3242cac311164f4d6 upstream. The RTC control register should be enabled in the process of initializing. Without this patch, I failed to enable RTC in Hisilicon Hi3620 SoC. The register mapping section in RTC is always read as zero. So I doubt that ST guys may already enable this register in bootloader. So they won't meet this issue. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-02-20drivers/rtc/rtc-isl1208.c: call rtc_update_irq() from the alarm irq handlerJan Luebbe1-0/+3
commit 72fca4a4b32dc778b5b885c3498700e42b610d49 upstream. Previously the alarm event was not propagated into the RTC subsystem. By adding a call to rtc_update_irq, this fixes a timeout problem with the hwclock utility. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16drivers/rtc/rtc-vt8500.c: fix handling of data passed in struct rtc_timeTony Prisk1-3/+4
commit 2f90b68309683f2c5765a1b04ca23d71e51f1494 upstream. tm_mon is 0..11, whereas vt8500 expects 1..12 for the month field, causing invalid date errors for January, and causing the day field to roll over incorrectly. The century flag is only handled in vt8500_rtc_read_time, but not set in vt8500_rtc_set_time. This patch corrects the behaviour of the century flag. Signed-off-by: Edgar Toernig <froese@gmx.de> Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16drivers/rtc/rtc-vt8500.c: correct handling of CR_24H bitfieldTony Prisk1-2/+2
commit 532db570e5181abc8f4f7bfa6c77c69ec2240198 upstream. Control register bitfield for 12H/24H mode is handled incorrectly. Setting CR_24H actually enables 12H mode. This patch renames the define and changes the initialization code to correctly set 24H mode. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Cc: Edgar Toernig <froese@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-10-31drivers/rtc/rtc-imxdi.c: add missing spin lock initializationJan Luebbe1-0/+2
commit fee0de7791f967c2c5f0d43eb7b7261761b45e64 upstream. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Roland Stigge <stigge@antcom.de> Cc: Grant Likely <grant.likely@secretlab.ca> Tested-by: Roland Stigge <stigge@antcom.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-10-10drivers/rtc/rtc-twl.c: ensure all interrupts are disabled during probeKevin Hilman1-0/+5
commit 8dcebaa9a0ae8a0487f4342f3d56d2cb1c980860 upstream. On some platforms, bootloaders are known to do some interesting RTC programming. Without going into the obscurities as to why this may be the case, suffice it to say the the driver should not make any assumptions about the state of the RTC when the driver loads. In particular, the driver probe should be sure that all interrupts are disabled until otherwise programmed. This was discovered when finding bursty I2C traffic every second on Overo platforms. This I2C overhead was keeping the SoC from hitting deep power states. The cause was found to be the RTC firing every second on the I2C-connected TWL PMIC. Special thanks to Felipe Balbi for suggesting to look for a rogue driver as the source of the I2C traffic rather than the I2C driver itself. Special thanks to Steve Sakoman for helping track down the source of the continuous RTC interrups on the Overo boards. Signed-off-by: Kevin Hilman <khilman@ti.com> Cc: Felipe Balbi <balbi@ti.com> Tested-by: Steve Sakoman <steve@sakoman.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Tested-by: Shubhrajyoti Datta <omaplinuxkernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-09-12drivers/rtc/rtc-rs5c348.c: fix hour decoding in 12-hour modeAtsushi Nemoto1-2/+5
commit 7dbfb315b2aaef0a115765946bf3026d074c33a7 upstream. Correct the offset by subtracting 20 from tm_hour before taking the modulo 12. [ "Why 20?" I hear you ask. Or at least I did. Here's the reason why: RS5C348_BIT_PM is 32, and is - stupidly - included in the RS5C348_HOURS_MASK define. So it's really subtracting out that bit to get "hour+12". But then because it does things modulo 12, it needs to add the 12 in again afterwards anyway. This code is confused. It would be much clearer if RS5C348_HOURS_MASK just didn't include the RS5C348_BIT_PM bit at all, then it wouldn't need to do the silly subtract either. Whatever. It's all just math, the end result is the same. - Linus ] Reported-by: James Nute <newten82@gmail.com> Tested-by: James Nute <newten82@gmail.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-08-10rtc: wm831x: Feed the write counter into device_add_randomness()Mark Brown1-1/+23
commit 9dccf55f4cb011a7552a8a2749a580662f5ed8ed upstream. The tamper evident features of the RTC include the "write counter" which is a pseudo-random number regenerated whenever we set the RTC. Since this value is unpredictable it should provide some useful seeding to the random number generator. Only do this on boot since the goal is to seed the pool rather than add useful entropy. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25drivers/rtc/rtc-mxc.c: fix irq enabled interrupts warningBenoît Thébaudeau1-2/+3
commit b59f6d1febd6cbe9fae4589bf72da0ed32bc69e0 upstream. Fixes WARNING: at irq/handle.c:146 handle_irq_event_percpu+0x19c/0x1b8() irq 25 handler mxc_rtc_interrupt+0x0/0xac enabled interrupts Modules linked in: (unwind_backtrace+0x0/0xf0) from (warn_slowpath_common+0x4c/0x64) (warn_slowpath_common+0x4c/0x64) from (warn_slowpath_fmt+0x30/0x40) (warn_slowpath_fmt+0x30/0x40) from (handle_irq_event_percpu+0x19c/0x1b8) (handle_irq_event_percpu+0x19c/0x1b8) from (handle_irq_event+0x28/0x38) (handle_irq_event+0x28/0x38) from (handle_level_irq+0x80/0xc4) (handle_level_irq+0x80/0xc4) from (generic_handle_irq+0x24/0x38) (generic_handle_irq+0x24/0x38) from (handle_IRQ+0x30/0x84) (handle_IRQ+0x30/0x84) from (avic_handle_irq+0x2c/0x4c) (avic_handle_irq+0x2c/0x4c) from (__irq_svc+0x40/0x60) Exception stack(0xc050bf60 to 0xc050bfa8) bf60: 00000001 00000000 003c4208 c0018e20 c050a000 c050a000 c054a4c8 c050a000 bf80: c05157a8 4117b363 80503bb4 00000000 01000000 c050bfa8 c0018e2c c000e808 bfa0: 60000013 ffffffff (__irq_svc+0x40/0x60) from (default_idle+0x1c/0x30) (default_idle+0x1c/0x30) from (cpu_idle+0x68/0xa8) (cpu_idle+0x68/0xa8) from (start_kernel+0x22c/0x26c) Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sascha Hauer <kernel@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-05-31drivers/rtc/rtc-pl031.c: configure correct wday for 2000-01-01Rajkumar Kasirajan1-0/+18
commit c0a5f4a05af588a0f9951f8d24e2564b09501918 upstream. The reset date of the ST Micro version of PL031 is 2000-01-01. The correct weekday for 2000-01-01 is saturday, but pl031 is initialized to sunday. This may lead to alarm malfunction, so configure the correct wday if RTC_DR indicates reset. Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Mattias Wallin <mattias.wallin@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-04-23drivers/rtc/rtc-pl031.c: enable clock on all ST variantsLinus Walleij1-2/+1
commit 2f3972168353d355854d6381f1f360ce83b723e5 upstream. The ST variants of the PL031 all require bit 26 in the control register to be set before they work properly. Discovered this when testing on the Nomadik board where it would suprisingly just stand still. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Cc: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02rtc: Provide flag for rtc devices that don't support UIEJohn Stultz2-0/+7
commit 4a649903f91232d02284d53724b0a45728111767 upstream. Richard Weinberger noticed that on some RTC hardware that doesn't support UIE mode, due to coarse granular alarms (like 1minute resolution), the current virtualized RTC support doesn't properly error out when UIE is enabled. Instead the current code queues an alarm for the next second, but it won't fire until up to a miniute later. This patch provides a generic way to flag this sort of hardware and fixes the issue on the mpc5121 where Richard noticed the problem. Reported-by: Richard Weinberger <richard@nod.at> Tested-by: Richard Weinberger <richard@nod.at> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02rtc: Disable the alarm in the hardware (v2)Rabin Vincent1-2/+13
commit 41c7f7424259ff11009449f87c95656f69f9b186 upstream. Currently, the RTC code does not disable the alarm in the hardware. This means that after a sequence such as the one below (the files are in the RTC sysfs), the box will boot up after 2 minutes even though we've asked for the alarm to be turned off. # echo $((`cat since_epoch`)+120) > wakealarm # echo 0 > wakealarm # poweroff Fix this by disabling the alarm when there are no timers to run. The original version of this patch was reverted. This version disables the irq directly instead of setting a disabled timer in the future. Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Merged in the second revision from Rabin] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-26drivers/rtc/interface.c: fix alarm rollover when day or month is out-of-rangeBen Hutchings1-2/+2
commit e74a8f2edb92cb690b467cea0ab652c509e9f624 upstream. Commit f44f7f96a20a ("RTC: Initialize kernel state from RTC") introduced a potential infinite loop. If an alarm time contains a wildcard month and an invalid day (> 31), or a wildcard year and an invalid month (>= 12), the loop searching for the next matching date will never terminate. Treat the invalid values as wildcards. Fixes <http://bugs.debian.org/646429>, <http://bugs.debian.org/653331> Reported-by: leo weppelman <leoweppelman@googlemail.com> Reported-by: "P. van Gaans" <mailme667@yahoo.co.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04Revert "rtc: Expire alarms after the time is set."Linus Torvalds1-6/+0
This reverts commit 93b2ec0128c431148b216b8f7337c1a52131ef03. The call to "schedule_work()" in rtc_initialize_alarm() happens too early, and can cause oopses at bootup Neil Brown explains why we do it: "If you set an alarm in the future, then shutdown and boot again after that time, then you will end up with a timer_queue node which is in the past. When this happens the queue gets stuck. That entry-in-the-past won't get removed until and interrupt happens and an interrupt won't happen because the RTC only triggers an interrupt when the alarm is "now". So you'll find that e.g. "hwclock" will always tell you that 'select' timed out. So we force the interrupt work to happen at the start just in case." and has a patch that convert it to do things in-process rather than with the worker thread, but right now it's too late to play around with this, so we just revert the patch that caused problems for now. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Requested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Requested-by: John Stultz <john.stultz@linaro.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-04Revert "rtc: Disable the alarm in the hardware"Linus Torvalds1-34/+10
This reverts commit c0afabd3d553c521e003779c127143ffde55a16f. It causes failures on Toshiba laptops - instead of disabling the alarm, it actually seems to enable it on the affected laptops, resulting in (for example) the laptop powering on automatically five minutes after shutdown. There's a patch for it that appears to work for at least some people, but it's too late to play around with this, so revert for now and try again in the next merge window. See for example http://bugs.debian.org/652869 Reported-and-bisected-by: Andreas Friedrich <afrie@gmx.net> (Toshiba Tecra) Reported-by: Antonio-M. Corbi Bellot <antonio.corbi@ua.es> (Toshiba Portege R500) Reported-by: Marco Santos <marco.santos@waynext.com> (Toshiba Portege Z830) Reported-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr> (Toshiba Portege R830) Cc: Jonathan Nieder <jrnieder@gmail.com> Requested-by: John Stultz <john.stultz@linaro.org> Cc: stable@kernel.org # for the versions that applied this Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-20Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds2-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time/clocksource: Fix kernel-doc warnings rtc: m41t80: Workaround broken alarm functionality rtc: Expire alarms after the time is set.
2011-12-14rtc: m41t80: Workaround broken alarm functionalityJohn Stultz1-0/+9
The m41t80 driver can read and set the alarm, but it doesn't seem to have a functional alarm irq. This causes failures when the generic core sees alarm functions, but then cannot use them properly for things like UIE mode. Disabling the alarm functions allows proper error reporting, and possible fallback to emulated modes. Once someone fixes the alarm irq functionality, this can be restored. CC: stable@kernel.org CC: Matt Turner <mattst88@gmail.com> CC: Nico Macrionitis <acrux@cruxppc.org> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Reported-by: Matt Turner <mattst88@gmail.com> Reported-by: Nico Macrionitis <acrux@cruxppc.org> Tested-by: Nico Macrionitis <acrux@cruxppc.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-12-14rtc: Expire alarms after the time is set.NeilBrown1-0/+6
If the alarm time programming in the rtc is ever in the past, it won't fire, and any other alarm will be queued after it so they won't fire either. So any time that the alarm might be in the past, we need to trigger the irq handler to ensure the old alarm is cleared and the timer queue is fully in the future. This can happen: - when we first initialise the alarm - when we set the time in the rtc. so follow both of these by scheduling the timer work function. CC: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de> [Also catch set_mmss case -jstultz] Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-12-09drivers/rtc/rtc-s3c.c: fix driver clock enable/disable balance issuesJonghwan Choi1-1/+1
If an error occurs after the clock is enabled, the enable/disable state can become unbalanced. Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-06Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds2-15/+39
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clockevents: Set noop handler in clockevents_exchange_device() tick-broadcast: Stop active broadcast device when replacing it clocksource: Fix bug with max_deferment margin calculation rtc: Fix some bugs that allowed accumulating time drift in suspend/resume rtc: Disable the alarm in the hardware
2011-11-23rtc: Fix some bugs that allowed accumulating time drift in suspend/resumeArve Hjønnevåg1-5/+5
The current code checks if abs(delta_delta.tv_sec) is greater or equal to two before it discards the old delta value, but this can trigger at close to -1 seconds since -1.000000001 seconds is stored as tv_sec -2 and tv_nsec 999999999 in a normalized timespec. rtc_resume had an early return check if the rtc value had not changed since rtc_suspend. This effectivly stops time for the duration of the short sleep. Check if sleep_time is positive after all the adjustments have been applied instead since this allows the old_system adjustment in rtc_suspend to have an effect even for short sleep cycles. CC: stable@kernel.org Signed-off-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-11-23rtc: Disable the alarm in the hardwareRabin Vincent1-10/+34
Currently, the RTC code does not disable the alarm in the hardware. This means that after a sequence such as the one below (the files are in the RTC sysfs), the box will boot up after 2 minutes even though we've asked for the alarm to be turned off. # echo $((`cat since_epoch`)+120) > wakealarm # echo 0 > wakealarm # poweroff Fix this by disabling the alarm when there are no timers to run. Cc: stable@kernel.org Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-11-15rtc: rtc-puv3: Add __devinit and __devexit markers for probe and removeAxel Lin1-2/+2
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2011-11-12vrtc: change its year offset from 1960 to 1972Feng Tang1-8/+11
Real world year equals the value in vrtc YEAR register plus an offset. We used 1960 as the offset to make leap year consistent, but for a device's first use, its YEAR register is 0 and the system year will be parsed as 1960 which is not a valid UNIX time and will cause many applications to fail mysteriously. So we use 1972 instead to fix this issue. Updated patch which adds a sanity check suggested by Mathias This isn't a change in behaviour for systems, because 1972 is the one we actually use. It's the old version in upstream which is out of sync with all devices. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds17-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-03Merge branch 'akpm' (Andrew's incoming - part two)Linus Torvalds3-26/+39
Says Andrew: "60 patches. That's good enough for -rc1 I guess. I have quite a lot of detritus to be rechecked, work through maintainers, etc. - most of the remains of MM - rtc - various misc - cgroups - memcg - cpusets - procfs - ipc - rapidio - sysctl - pps - w1 - drivers/misc - aio" * akpm: (60 commits) memcg: replace ss->id_lock with a rwlock aio: allocate kiocbs in batches drivers/misc/vmw_balloon.c: fix typo in code comment drivers/misc/vmw_balloon.c: determine page allocation flag can_sleep outside loop w1: disable irqs in critical section drivers/w1/w1_int.c: multiple masters used same init_name drivers/power/ds2780_battery.c: fix deadlock upon insertion and removal drivers/power/ds2780_battery.c: add a nolock function to w1 interface drivers/power/ds2780_battery.c: create central point for calling w1 interface w1: ds2760 and ds2780, use ida for id and ida_simple_get() to get it pps gpio client: add missing dependency pps: new client driver using GPIO pps: default echo function include/linux/dma-mapping.h: add dma_zalloc_coherent() sysctl: make CONFIG_SYSCTL_SYSCALL default to n sysctl: add support for poll() RapidIO: documentation update drivers/net/rionet.c: fix ethernet address macros for LE platforms RapidIO: fix potential null deref in rio_setup_device() RapidIO: add mport driver for Tsi721 bridge ...
2011-11-03drivers/rtc/rtc-mc13xxx.c: move probe and remove callbacks to .init.text and ↵Uwe Kleine-König1-3/+3
.exit.text The driver is added using platform_driver_probe(), so the callbacks can be discarded more aggessively. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-03rtc: add initial support for mcp7941x partsDavid Anders1-0/+27
Add initial support for the microchip mcp7941x series of real time clocks. The mcp7941x series is generally compatible with the ds1307 and ds1337 rtc devices from dallas semiconductor. minor differences include a backup battery enable bit, and the polarity of the oscillator enable bit. Signed-off-by: David Anders <danders.dev@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-03drivers/rtc/class.c: convert idr to ida and use ida_simple_get()Jonathan Cameron1-23/+9
This is the one use of an ida that doesn't retry on receiving -EAGAIN. I'm assuming do so will cause no harm and may help on a rare occasion. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02um: switch to use of drivers/KconfigAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2011-11-01rtc: Add module.h to implicit users in drivers/rtcPaul Gortmaker17-0/+17
The module.h was implicitly everywhere, but when we clean that up, the implicit users will compile fail; fix them up in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-15drivers/rtc/rtc-s3c.c: fix no occurrence of alarm interruptDonggeun Kim1-0/+26
The driver does not generate an alarm interrupt even though a time for an alarm is set. This results from disabling rtc_clk after setting the alarm time. To generate an alarm interrupt the driver should maintain its enabled state for rtc_clk the until alarm interrupt occurs. This patch permits generation of an alarm interrupt. [akpm@linux-foundation.org: make s3c_rtc_alarm_clk_lock local to s3c_rtc_alarm_clk_enable()] Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-15drivers/rtc/rtc-imxdi.c needs linux/sched.hAxel Lin1-0/+1
Include linux/sched.h to fix below build error. CC drivers/rtc/rtc-imxdi.o drivers/rtc/rtc-imxdi.c: In function 'di_write_wait': drivers/rtc/rtc-imxdi.c:168: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) drivers/rtc/rtc-imxdi.c:168: error: (Each undeclared identifier is reported only once drivers/rtc/rtc-imxdi.c:168: error: for each function it appears in.) drivers/rtc/rtc-imxdi.c:168: error: implicit declaration of function 'signal_pending' drivers/rtc/rtc-imxdi.c:168: error: implicit declaration of function 'schedule_timeout' drivers/rtc/rtc-imxdi.c: In function 'dryice_norm_irq': drivers/rtc/rtc-imxdi.c:329: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-08Merge branch 'timers-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tipLinus Torvalds3-44/+34
* 'timers-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: rtc: twl: Fix registration vs. init order rtc: Initialized rtc_time->tm_isdst rtc: Fix RTC PIE frequency limit rtc: rtc-twl: Remove lockdep related local_irq_enable() rtc: rtc-twl: Switch to using threaded irq rtc: ep93xx: Fix 'rtc' may be used uninitialized warning alarmtimers: Avoid possible denial of service with high freq periodic timers alarmtimers: Memset itimerspec passed into alarm_timer_get alarmtimers: Avoid possible null pointer traversal
2011-08-27rtc: twl: Fix registration vs. init orderTodd Poynor1-28/+24
Only register as an RTC device after the hardware has been successfully initialized. The RTC class driver will call back to this driver to read a pending alarm, and other drivers watching for new devices on the RTC class may read the RTC time upon registration. Such access might occur while the RTC is stopped, prior to clearing pending alarms, etc. The new ordering also avoids leaving the platform device drvdata set to an unregistered struct rtc_device * on probe errors. Signed-off-by: Todd Poynor <toddpoynor@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-08-27rtc: Initialized rtc_time->tm_isdstMike Waychison1-0/+2
Even though the Linux kernel does not use the tm_isdst field, it is exposed as part of the ABI. This field can accidentally be left initialized, which is why we currently memset buffers returned to userland in rtc_read_time. There is a case however where the field can return garbage from the stack though when using the RTC_ALM_READ ioctl on the rtc device. This ioctl invokes rtc_read_alarm, which is careful to memset the rtc_wkalrm buffer that is copied to userland, but it then uses a struct copy to assign to alarm->time given the return value from rtc_ktime_to_tm(). rtc_ktime_to_tm() is implemented by calling rtc_time_to_tm using a derivative seconds counds from ktime, but rtc_time_to_tm does not assign a value to ->tm_isdst. This results in garbage from rtc_ktime_to_tm()'s frame ending up being copied out to userland as part of the returned rtc_wkalrm. Fix this by initializing rtc_time->tm_isdst to 0 in rtc_time_to_tm. Signed-off-by: Mike Waychison <mikew@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-30 03:16:09 +0300