summaryrefslogtreecommitdiff
path: root/drivers/rtc/rtc-rx8010.c
AgeCommit message (Collapse)AuthorFilesLines
2021-02-06rtc: rx8010: quiet maybe-unused variable warningAlexandre Belloni1-1/+1
When CONFIG_OF is disabled then the matching table is not referenced. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210202112219.3610853-19-alexandre.belloni@bootlin.com
2021-01-26rtc: rx8010: use rtc_lock/rtc_unlockAlexandre Belloni1-3/+3
Avoid accessing directly rtc->ops_lock and use the RTC core helpers. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210119220653.677750-12-alexandre.belloni@bootlin.com
2021-01-17rtc: rx8010: drop a struct rtc_class_opsAlexandre Belloni1-10/+3
Merge both struct rtc_class_ops in a single one and use RTC_FEATURE_ALARM to signal to the core whether alarms are available. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210110231752.1418816-10-alexandre.belloni@bootlin.com
2020-11-19rtc: rework rtc_register_device() resource managementBartosz Golaszewski1-1/+1
rtc_register_device() is a managed interface but it doesn't use devres by itself - instead it marks an rtc_device as "registered" and the devres callback for devm_rtc_allocate_device() takes care of resource release. This doesn't correspond with the design behind devres where managed structures should not be aware of being managed. The correct solution here is to register a separate devres callback for unregistering the device. While at it: rename rtc_register_device() to devm_rtc_register_device() and add it to the list of managed interfaces in devres.rst. This way we can avoid any potential confusion of driver developers who may expect there to exist a corresponding unregister function. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201109163409.24301-8-brgl@bgdev.pl
2020-09-29rtc: rx8010: rename rx8010_init_client() to rx8010_init()Bartosz Golaszewski1-2/+2
Since the switch to using regmap this function no longer takes the I2C client struct as argument nor do we even interact with the client anywhere other than when creating the regmap. Rename it to a less misleading name: "rx8010_init()". Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200917114656.9036-1-brgl@bgdev.pl
2020-09-15rtc: rx8010: use range checking provided by core RTC codeBartosz Golaszewski1-3/+2
We don't need to check the time range manually in set_time(), we can use range_min and range_max exposed by struct rtc_device. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-15-brgl@bgdev.pl
2020-09-15rtc: rx8010: convert to using regmapBartosz Golaszewski1-119/+79
This driver requires SMBUS to work. We can relax this requirement if we switch to using i2c regmap and let the regmap sub-system figure out how to talk to the bus. This also has the advantage of shrinking the code for register updates. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-14-brgl@bgdev.pl
2020-09-15rtc: rx8010: switch to using the preferred i2c APIBartosz Golaszewski1-3/+2
We should generally use probe_new instead of probe when registering i2c drivers. Convert rx8010 to using it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-13-brgl@bgdev.pl
2020-09-15rtc: rx8010: switch to using the preferred RTC APIBartosz Golaszewski1-11/+7
Use devm_rtc_allocate_device() + rtc_register_device() instead of the deprecated devm_rtc_device_register(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-12-brgl@bgdev.pl
2020-09-15rtc: rx8010: prefer sizeof(*val) over sizeof(struct type_of_val)Bartosz Golaszewski1-1/+1
Using the size of the variable is preferred over using the size of its type when allocating memory. Convert the call to devm_kzalloc() in probe(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-11-brgl@bgdev.pl
2020-09-15rtc: rx8010: use a helper variable for client->dev in probe()Bartosz Golaszewski1-8/+7
Simple 'dev' looks better then repeated &client->dev and has the added benefit of avoiding unnecessary line breaks. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-10-brgl@bgdev.pl
2020-09-15rtc: rx8010: drop unnecessary initializationBartosz Golaszewski1-1/+1
The 'err' local variable in rx8010_init_client() doesn't need to be initialized. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-9-brgl@bgdev.pl
2020-09-15rtc: rx8010: don't use magic values for time buffer lengthBartosz Golaszewski1-5/+6
The time buffer len is used directly in this driver. For readability it's better to define it as the difference between the date register offsets and use sizeof() whenever referencing it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-8-brgl@bgdev.pl
2020-09-15rtc: rx8010: rename ret to err in rx8010_set_time()Bartosz Golaszewski1-11/+11
All other functions in this driver use 'err' for integer return values. Do the same in rx8010_set_time() for consistency. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-7-brgl@bgdev.pl
2020-09-15rtc: rx8010: use tabs instead of spaces for code formattingBartosz Golaszewski1-29/+29
The define values in this driver are close to their names and they are separated by spaces. Use tabs instead and align all defines. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-6-brgl@bgdev.pl
2020-09-15rtc: rx8010: consolidate local variables of the same typeBartosz Golaszewski1-12/+6
Move local variables of the same type into a single line for better readability. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-5-brgl@bgdev.pl
2020-09-15rtc: rx8010: remove unnecessary bracketsBartosz Golaszewski1-6/+3
Remove brackets wherever they guard a single line. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-4-brgl@bgdev.pl
2020-09-15rtc: rx8010: remove a stray newlineBartosz Golaszewski1-1/+0
Remove an unnecessary newline after requesting the interrupt. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-3-brgl@bgdev.pl
2020-09-15rtc: rx8010: don't modify the global rtc opsBartosz Golaszewski1-7/+17
The way the driver is implemented is buggy for the (admittedly unlikely) use case where there are two RTCs with one having an interrupt configured and the second not. This is caused by the fact that we use a global rtc_class_ops struct which we modify depending on whether the irq number is present or not. Fix it by using two const ops structs with and without alarm operations. While at it: not being able to request a configured interrupt is an error so don't ignore it and bail out of probe(). Fixes: ed13d89b08e3 ("rtc: Add Epson RX8010SJ RTC driver") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200914154601.32245-2-brgl@bgdev.pl
2019-12-23rtc: rx8010: Fix return code for rx8010_probeNobuhiro Iwamatsu1-1/+1
In the current code, the return value of devm_request_threaded_irq may be returned. This fixes it. CC: Alessandro Zummo <a.zummo@towertech.it> CC: Alexandre Belloni <alexandre.belloni@bootlin.com> CC: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20191217121231.2698817-2-iwamatsu@nigauri.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18rtc: rx8010: return meaningful value for RTC_VL_READAlexandre Belloni1-5/+2
RX8010_FLAG_VLF means the voltage dropped too low and data has been lost. Link: https://lore.kernel.org/r/20191214220259.621996-18-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18rtc: rx8010: remove RTC_VL_CLR handlingAlexandre Belloni1-15/+1
Remove RTC_VL_CLR handling because it is a disservice to userspace as it removes the important information that the RTC data is invalid. This may lead userspace to set an invalid system time later on. Link: https://lore.kernel.org/r/20191214220259.621996-17-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-07-17Merge tag 'rtc-5.3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "A quiet cycle this time. - ds1307: properly handle oscillator failure flags - imx-sc: alarm support - pcf2123: alarm support, correct offset handling - sun6i: add R40 support - simplify getting the adapter of an i2c client" * tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (37 commits) rtc: wm831x: Add IRQF_ONESHOT flag rtc: stm32: remove one condition check in stm32_rtc_set_alarm() rtc: pcf2123: Fix build error rtc: interface: Change type of 'count' from int to u64 rtc: pcf8563: Clear event flags and disable interrupts before requesting irq rtc: pcf8563: Fix interrupt trigger method rtc: pcf2123: fix negative offset rounding rtc: pcf2123: add alarm support rtc: pcf2123: use %ptR rtc: pcf2123: port to regmap rtc: pcf2123: remove sysfs register view rtc: rx8025: simplify getting the adapter of a client rtc: rx8010: simplify getting the adapter of a client rtc: rv8803: simplify getting the adapter of a client rtc: m41t80: simplify getting the adapter of a client rtc: fm3130: simplify getting the adapter of a client rtc: tegra: Drop MODULE_ALIAS rtc: sun6i: Add R40 compatible dt-bindings: rtc: sun6i: Add the R40 RTC compatible dt-bindings: rtc: Convert Allwinner A31 RTC to a schema ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-5/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-09rtc: rx8010: simplify getting the adapter of a clientWolfram Sang1-1/+1
We have a dedicated pointer for that, so use it. Much easier to read and less computation involved. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-02rtc: stop validating rtc_time in .read_timeAlexandre Belloni1-1/+1
The RTC core is always calling rtc_valid_tm after the read_time callback. It is not necessary to call it just before returning from the callback. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2017-11-09rtc: rx8010: Fix for incorrect return valueAkshay Bhat1-2/+2
The err variable is not being reset after a successful read. Explicitly return 0 at the end of function call to account for all return paths. Reported-by: Jens-Peter Oswald <oswald@lre.de> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-08rtc: rx8010: Specify correct address for RX8010_RESV31Akshay Bhat1-1/+1
Define for reserved register 31 had the incorrect address. Specify the correct address. Reported-by: Jens-Peter Oswald <oswald@lre.de> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-08rtc: rx8010: Remove duplicate defineAkshay Bhat1-1/+0
Remove duplicate define for RX8010_YEAR Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09rtc: rx8010: Add OF device ID tableJavier Martinez Canillas1-0/+7
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-05rtc: rx8010: change lock mechanismFabien Lahoudere1-21/+3
Remove spinlock and use the "rtc->ops_lock" from RTC subsystem instead. spin_lock_irqsave() is not needed here because we do not have hard IRQs. This patch fixes the following issue: root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc [ 82.108175] BUG: spinlock wrong CPU on CPU#0, hwclock/855 [ 82.113660] lock: 0xedb4899c, .magic: dead4ead, .owner: hwclock/855, .owner_cpu: 1 [ 82.121329] CPU: 0 PID: 855 Comm: hwclock Not tainted 4.8.0-00042-g09d5410-dirty #20 [ 82.129078] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 82.135609] Backtrace: [ 82.138090] [<8010d378>] (dump_backtrace) from [<8010d5c0>] (show_stack+0x20/0x24) [ 82.145664] r7:ec936000 r6:600a0013 r5:00000000 r4:81031680 [ 82.151402] [<8010d5a0>] (show_stack) from [<80401518>] (dump_stack+0xb4/0xe8) [ 82.158636] [<80401464>] (dump_stack) from [<8017b8b0>] (spin_dump+0x84/0xcc) [ 82.165775] r10:00000000 r9:ec936000 r8:81056090 r7:600a0013 r6:edb4899c r5:edb4899c [ 82.173691] r4:e5033e00 r3:00000000 [ 82.177308] [<8017b82c>] (spin_dump) from [<8017bcb0>] (do_raw_spin_unlock+0x108/0x130) [ 82.185314] r5:edb4899c r4:edb4899c [ 82.188938] [<8017bba8>] (do_raw_spin_unlock) from [<8094b93c>] (_raw_spin_unlock_irqrestore+0x34/0x54) [ 82.198333] r5:edb4899c r4:600a0013 [ 82.201953] [<8094b908>] (_raw_spin_unlock_irqrestore) from [<8065b090>] (rx8010_set_time+0x14c/0x188) [ 82.211261] r5:00000020 r4:edb48990 [ 82.214882] [<8065af44>] (rx8010_set_time) from [<80653fe4>] (rtc_set_time+0x70/0x104) [ 82.222801] r7:00000051 r6:edb39da0 r5:edb39c00 r4:ec937e8c [ 82.228535] [<80653f74>] (rtc_set_time) from [<80655774>] (rtc_dev_ioctl+0x3c4/0x674) [ 82.236368] r7:00000051 r6:7ecf1b74 r5:00000000 r4:edb39c00 [ 82.242106] [<806553b0>] (rtc_dev_ioctl) from [<80284034>] (do_vfs_ioctl+0xa4/0xa6c) [ 82.249851] r8:00000003 r7:80284a40 r6:ed1e9c80 r5:edb44e60 r4:7ecf1b74 [ 82.256642] [<80283f90>] (do_vfs_ioctl) from [<80284a40>] (SyS_ioctl+0x44/0x6c) [ 82.263953] r10:00000000 r9:ec936000 r8:7ecf1b74 r7:4024700a r6:ed1e9c80 r5:00000003 [ 82.271869] r4:ed1e9c80 [ 82.274432] [<802849fc>] (SyS_ioctl) from [<80108520>] (ret_fast_syscall+0x0/0x1c) [ 82.282005] r9:ec936000 r8:801086c4 r7:00000036 r6:00000000 r5:00000003 r4:0008e1bc root@GE004097290448 b850v3:~# Message from syslogd@GE004097290448 at Dec 3 11:17:08 ... kernel:[ 82.108175] BUG: spinlock wrong CPU on CPU#0, hwclock/855 Message from syslogd@GE004097290448 at Dec 3 11:17:08 ... kernel:[ 82.113660] lock: 0xedb4899c, .magic: dead4ead, .owner: hwclock/855, .owner_cpu: 1 hwclock --systohc root@GE004097290448 b850v3:~# Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-09rtc: simplify implementations of read_alarmUwe Kleine-König1-7/+1
Since commit d68778b80dd7 ("rtc: initialize output parameter for read alarm to "uninitialized"") there is no need to explicitly set unsupported members to -1. So drop the respective assignments from drivers. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: Add Epson RX8010SJ RTC driverAkshay Bhat1-0/+523
This driver supports the following functions: - reading and setting time - alarms when connected to an IRQ - reading and clearing the voltage low flags Datasheet: http://www.epsondevice.com/docs/qd/en/DownloadServlet?id=ID000956 Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-04 13:51:28 +0300