summaryrefslogtreecommitdiff
path: root/drivers/rtc/rtc-ds1307.c
AgeCommit message (Collapse)AuthorFilesLines
2011-06-28drivers/rtc/rtc-ds1307.c: add support for RTC device pt7c4338Priyanka Jain1-0/+1
PT7C4338 chip is being manufactured by Pericom Technology Inc. It is a serial real-time clock which provides: 1) Low-power clock/calendar. 2) Programmable square-wave output. It has 56 bytes of nonvolatile RAM. Its register set is same as that of rtc device: DS1307. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-04RTC: Convert rtc drivers to use the alarm_irq_enable methodJohn Stultz1-36/+13
Some rtc drivers use the ioctl method instead of the alarm_irq_enable method for enabling alarm interupts. With the new virtualized RTC rework, its important for drivers to use the alarm_irq_enable instead. This patch converts the drivers that use the AIE ioctl method to use the alarm_irq_enable method. Other ioctl cmds are left untouched. I have not been able to test or even compile most of these drivers. Any help to make sure this change is correct would be appreciated! CC: Alessandro Zummo <a.zummo@towertech.it> CC: Thomas Gleixner <tglx@linutronix.de> CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Reported-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Tested-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-01-11i2c: Constify i2c_client where possibleJean Delvare1-6/+6
Helper functions for I2C and SMBus transactions don't modify the i2c_client that is passed to them, so it can be marked const. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-06-30rtc: fix ds1388 time corruptionJoakim Tjernlund1-2/+2
The ds1307 driver misreads the ds1388 registers when checking for 12 or 24 hour mode. Instead of checking the hour register it reads the minute register. Therefore the driver thinks minutes >= 40 has the 12HR bit set and resets the minute register by zeroing the high bits. This results in minutes are reset to 0-9, jumping back in time 40 or 50 minutes. The time jump is also written back to the RTC. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-21sysfs: add struct file* to bin_attr callbacksChris Wright1-2/+4
This allows bin_attr->read,write,mmap callbacks to check file specific data (such as inode owner) as part of any privilege validation. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18rtc: set wakeup capability for I2C and SPI RTC driversAnton Vorontsov1-0/+2
RTC core won't allow wakeup alarms to be set if RTC devices' parent (i.e. i2c_client or spi_device) isn't wakeup capable. For I2C devices there is I2C_CLIENT_WAKE flag exists that we can pass via board info, and if set, I2C core will initialize wakeup capability. For SPI devices there is no such flag at all. I believe that it's not platform code responsibility to allow or disallow wakeups, instead, drivers themselves should set the capability if a device can trigger wakeups. That's what drivers/base/power/sysfs.c says: * It is the responsibility of device drivers to enable (or disable) * wakeup signaling as part of changing device power states, respecting * the policy choices provided through the driver model. I2C and SPI RTC devices send wakeup events via interrupt lines, so we should set the wakeup capability if IRQ is routed. Ideally we should also check irq for wakeup capability before setting device's capability, i.e. if (can_irq_wake(irq)) device_set_wakeup_capable(&client->dev, 1); But there is no can_irq_wake() call exist, and it is not that trivial to implement it for all interrupts controllers and complex/cascaded setups. drivers/base/power/sysfs.c also covers these cases: * Devices may not be able to generate wakeup events from all power * states. Also, the events may be ignored in some configurations; * for example, they might need help from other devices that aren't * active So there is no guarantee that wakeup will actually work, and so I think there is no point in being pedantic wrt checking IRQ wakeup capability. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16rtc: ds1307 make it possible to share an irqDmitry Eremin-Solenikov1-1/+1
It's possible to have RTC irq shared with other device (e.g. mpc8349e-mitx board shares ds1339 irq with phy one). Handle this in driver. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23drivers/rtc: correct error-handling codeJulia Lawall1-2/+1
This code is not executed before ds1307->rtc has been successfully initialized to the result of calling rtc_device_register. Thus the test that ds1307->rtc is not NULL is always true. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @match exists@ expression x, E; statement S1, S2; @@ x = rtc_device_register(...) ... when != x = E ( * if (x == NULL || ...) S1 else S2 | * if (x == NULL && ...) S1 else S2 ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-20rtc: make rtc_update_irq callable with irqs enabledAtsushi Nemoto1-5/+0
The rtc_update_irq() might be called with irqs enabled, if a interrupt handler was registered without IRQF_DISABLED. Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_lock/spin_unlock. Also update kerneldoc and drivers which do extra work to follow the current interface spec, as suggestted by David Brownell. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19rtc: rtc-ds1307 add ds3231Wolfram Sang1-4/+18
Add ds3231 variant. For that, the BBSQI bit position was changed from a simple define into a lookup-array as it differs. This also removes writing to an unused bit in case of the ds1337. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19rtc: rtc-ds1307 add ds1388Joakim Tjernlund1-4/+15
Extend the ds1307 driver to support ds1388 too. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc: add EPSON RX8025 support to DS1307 RTC driverMatthias Fuchs1-0/+80
Add support for the EPSON RX8025 RTC. The date/time registers of this chip are compatible with the DS1307. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-ds1307: true SMBus compatibilityEd Swierk1-12/+97
Allow the rtc-ds1307 driver to work with SMBus controllers like nforce2 that do not support i2c block transfers. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: BARRE Sebastien <sbarre@sdelcc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08rtc-ds1307: remove legacy probe() checksJüri Reitel1-27/+4
Remove RTC register value checks from the rtc-ds1307 probe() function. They were left over from the legacy style I2C driver, which had to defend against finding a non-RTC chip when the driver was probed. Also fix a minor glitch in the alarm support: DS1307 chips don't have alarms, so name those methods after one of the chips which actually *do* have alarms (DS1337). Signed-off-by: Jüri Reitel <juri.reitel@liewenthal.ee> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Sebastien Barre <sbarre@sdelcc.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08rtc-ds1307: SMBus compatibilityBARRE Sebastien1-88/+35
Change i2c access functions to SMBus access functions in order to use the ds1307 with SMBus adapter. Signed-off-by: Sebastien Barre <sbarre@sdelcc.com> Acked-by: David Brownell <david-b@pacbell.net> Tested-by: David Brownell <david-b@pacbell.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: Rodolfo Giometti <giometti@enneenne.com> Tested-by: Sebastien Barre <sbarre@sdelcc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20x86: sysfs: kill owner field from attributeParag Warudkar1-1/+0
Tejun's commit 7b595756ec1f49e0049a9e01a1298d53a7faaa15 made sysfs attribute->owner unnecessary. But the field was left in the structure to ease the merge. It's been over a year since that change and it is now time to start killing attribute->owner along with its users - one arch at a time! This patch is attempt #1 to get rid of attribute->owner only for CONFIG_X86_64 or CONFIG_X86_32 . We will deal with other arches later on as and when possible - avr32 will be the next since that is something I can test. Compile (make allyesconfig / make allmodconfig / custom config) and boot tested. akpm: the idea is that we put the declaration of sttribute.owner inside `#ifndef CONFIG_X86'. But that proved to be too ambitious for now because new usages kept on turning up in subsystem trees. [akpm: remove the ifdef for now] Signed-off-by: Parag Warudkar <parag.lkml@gmail.com> Cc: Greg KH <greg@kroah.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tejun Heo <htejun@gmail.com> Cc: Len Brown <lenb@kernel.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20drivers/rtc/: use bcd2bin/bin2bcdAdrian Bunk1-20/+20
Change drivers/rtc/ to use the new bcd2bin/bin2bcd functions instead of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16rtc-ds1307: alarm support for ds1337/ds1339Rodolfo Giometti1-13/+295
Update the ds1307 driver with alarm support for ds1337/ds1339. This uses the first alarm (there are two), and matches on seconds, minutes, hours, and day-of-month. Tested on ds1339. [dbrownell@users.sourceforge.net: add comments; fixup style, valid irq checks, debug dumps; lock; more careful IRQ shutdown; switch BCD2BIN to bcd2bin (and vice versa); ENOTTY not EINVAL.] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30i2c: Convert most new-style drivers to use module aliasingJean Delvare1-38/+25
Based on earlier work by Jon Smirl and Jochen Friedrich. Update most new-style i2c drivers to use standard module aliasing instead of the old driver_name/type driver matching scheme. I've left the video drivers apart (except for SoC camera drivers) as they're a bit more diffcult to deal with, they'll have their own patch later. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jon Smirl <jonsmirl@gmail.com> Cc: Jochen Friedrich <jochen@scram.de>
2008-04-30i2c: Add support for device alias namesJean Delvare1-1/+2
Based on earlier work by Jon Smirl and Jochen Friedrich. This patch allows new-style i2c chip drivers to have alias names using the official kernel aliasing system and MODULE_DEVICE_TABLE(). At this point, the old i2c driver binding scheme (driver_name/type) is still supported. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jochen Friedrich <jochen@scram.de> Cc: Jon Smirl <jonsmirl@gmail.com> Cc: Kay Sievers <kay.sievers@vrfy.org>
2008-02-06rtc ds1307: ds_1340 change initfrederic Rodo1-7/+20
For DS140, clear the oscillator fault flag as needed. Signed-off-by: Frederic RODO <f.rodo@til-technologies.fr> [ And remove some "sparse" warnings. ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-15rtc-ds1307 exports NVRAMDavid Brownell1-0/+93
Export the NVRAM on DS1307 and DS1338 chips, like several of the other drivers do for such combination RTC-and-NVRAM chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26rtc-ds1307: typo fix found by coverityDavid Brownell1-1/+1
Fix a typo turned up by a Coverity check: referring to the wrong register, which could cause problems with DS1338 RTCs whose oscillators halted. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17rtc-ds1307 becomes new-style i2c driverDavid Brownell1-75/+53
Convert the rtc-ds1307 driver into a "new style" driver. Also improve probe() checks: be more correct about switching out of AM/PM mode, and issue a (debug) diagnostic when failing due to bogus register values. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Andrew Victor <andrew@sanpeople.com> Cc: Bill Gatliff <bgat@billgatliff.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17rtc-ds1307: oscillator restart for ds13{37,38,39,40}Rodolfo Giometti1-21/+45
When we find a ds1337 or ds1339 with the oscillator powered off, turn it on. If the oscillator fault flag was set, clear it and warn that the clock needs to be set. David Brownell: Bugfixes; provide corresponding update for ds1338, and the core of the fix for ds1340. Use a common warning message ("SET TIME!") whenever the clock needs to be set after oscillator fault (or oscillator enable, if fault is not a separate status). Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17rtc-ds1307 cleanupsDavid Brownell1-52/+124
This updates the rtc-ds1307 driver so that converting it to a "new style" driver (driver model, not legacy i2c model) will involve fewer changes. - Use pointer to i2c_client almost everywhere, so that it's easy to let the i2c core create that object; - Avoid using i2c_client.adapter, since that field is redundant and thus may go away (same object as i2c_client.dev.parent). - Extend type enum to include various RTCs this is expected to work with, and include register support for them. It also cleans up the support for multiple chip types, and fixes a glitch that could appear with an un-initialized RTC. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-10-04[PATCH] RTC: build fixesJeff Garzik1-3/+3
Fix obvious build breakage revealed by 'make allyesconfig' in current -git. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01[PATCH] constify rtc_class_ops: update driversDavid Brownell1-1/+1
Update RTC framework so that drivers can constify their method tables, moving them from ".data" to ".rodata". Then update the drivers. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] "RTC-framework" driver for DS1307 and similar RTC chipsDavid Brownell1-0/+388
This is an "RTC-framework" driver for DS1307 and similar RTC chips, It should be a full replacement for the existing ds1337.c driver (using the older RTC glue), giving a net increase in the number of RTC chips that work out-of-the-box. There's a whole cluster of RTCs that are very similar, but the 1337 driver was a bit too picky to work with most of them. Still no support for RTC alarm IRQs (on chips that support them). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-14 04:10:42 +0300