summaryrefslogtreecommitdiff
path: root/drivers/rtc/rtc-da9063.c
AgeCommit message (Collapse)AuthorFilesLines
2019-05-10Merge tag 'rtc-5.2' of ↵Linus Torvalds1-16/+11
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "A huge series from me this cycle. I went through many drivers to set the date and time range supported by the RTC which helps solving HW limitation when the time comes (as early as next year for some). This time, I focused on drivers using .set_mms and .set_mmss64, allowing me to remove those callbacks. About a third of the patches got reviews, I actually own the RTCs and I tested another third and the remaining one are unlikely to cause any issues. Other than that, a single new driver and the usual fixes here and there. Summary: Subsystem: - set_mmss and set_mmss64 rtc_ops removal - Fix timestamp value for RTC_TIMESTAMP_BEGIN_1900 - Use SPDX identifier for the core - validate upper bound of tm->tm_year New driver: - Aspeed BMC SoC RTC Drivers: - abx80x: use rtc_add_group - ds3232: nvram support - pcf85063: add alarm, nvram, offset correction and microcrystal rv8263 support - x1205: add of_match_table - Use set_time instead of set_mms/set_mmss64 for: ab3100, coh901331, digicolor, ds1672, ds2404, ep93xx, imxdi, jz4740, lpc32xx, mc13xxx, mxc, pcap, stmp3xxx, test, wm831x, xgene. - Set RTC range for: ab3100, at91sam9, coh901331, da9063, digicolor, dm355evm, ds1672, ds2404, ep39xx, goldfish, imxdi, jz4740, lpc32xx, mc13xxx, mv, mxc, omap, pcap, pcf85063, pcf85363, ps3, sh, stmp3xxx, sun4v, tegra, wm831x, xgene. - Switch to rtc_time64_to_tm/rtc_tm_to_time64 for the driver that properly set the RTC range. - Use dev_get_drvdata instead of multiple indirections" * tag 'rtc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (177 commits) rtc: snvs: Use __maybe_unused instead of #if CONFIG_PM_SLEEP rtc: imxdi: remove unused variable rtc: drop set_mms and set_mmss64 rtc: pcap: convert to SPDX identifier rtc: pcap: use .set_time rtc: pcap: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: pcap: set range rtc: digicolor: convert to SPDX identifier rtc: digicolor: use .set_time rtc: digicolor: set range rtc: digicolor: fix possible race condition rtc: jz4740: convert to SPDX identifier rtc: jz4740: rework invalid time detection rtc: jz4740: use dev_pm_set_wake_irq() to simplify code rtc: jz4740: use .set_time rtc: jz4740: remove useless check rtc: jz4740: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: jz4740: set range rtc: 88pm860x: prevent use-after-free on device remove rtc: Use dev_get_drvdata() ...
2019-04-04rtc: da9063: switch to rtc_time64_to_tm/rtc_tm_to_time64Alexandre Belloni1-2/+2
Call the 64bit versions of rtc_tm time conversion now that the range is enforced by the core. Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-04rtc: da9063: set rangeAlexandre Belloni1-3/+6
The DA9062 and DA9063 have a year register that can go up to 0x3F. Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-04rtc: da9063: convert header to SPDXWolfram Sang1-11/+3
Covnert the header of the source file to SPDX. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-03rtc: da9063: set uie_unsupported when relevantAlexandre Belloni1-0/+7
The DA9063AD doesn't support alarms on any seconds and its granularity is the minute. Set uie_unsupported in that case. Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-02rtc: diasemi: stop validating rtc_time in .read_timeAlexandre Belloni1-1/+1
The RTC core is always calling rtc_valid_tm after the read_time callback. It is not necessary to call it before returning from the callback. Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2016-01-11rtc: da9063: avoid writing undefined data to rtcEnrico Scholz1-17/+6
driver did | static void da9063_tm_to_data(struct rtc_time *tm, u8 *data, | { | const struct da9063_compatible_rtc_regmap *config = rtc->config; | | data[RTC_SEC] &= ~config->rtc_count_sec_mask; | data[RTC_SEC] |= tm->tm_sec & config->rtc_count_sec_mask; | ... | } | ... | static int da9063_rtc_set_time(struct device *dev, struct rtc_time *tm) | { | ... | u8 data[RTC_DATA_LEN]; | int ret; | | da9063_tm_to_data(tm, data, rtc); which means that some bits of stack content (in 'data[]') was masked out and written to the RTC. Because da9063_tm_to_data() is used only by da9063_rtc_set_time() and da9063_rtc_set_alarm(), we can write fields directly. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Tested-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-12-20rtc: da9063: fix access ordering error during RTC interrupt at system power onSteve Twiss1-10/+9
This fix alters the ordering of the IRQ and device registrations in the RTC driver probe function. This change will apply to the RTC driver that supports both DA9063 and DA9062 PMICs. A problem could occur with the existing RTC driver if: A system is started from a cold boot using the PMIC RTC IRQ to initiate a power on operation. For instance, if an RTC alarm is used to start a platform from power off. The existing driver IRQ is requested before the device has been properly registered. i.e. ret = devm_request_threaded_irq() comes before rtc->rtc_dev = devm_rtc_device_register(); In this case, the interrupt can be called before the device has been registered and the handler can be called immediately. The IRQ handler da9063_alarm_event() contains the function call rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF); which in turn tries to access the unavailable rtc->rtc_dev. The fix is to reorder the functions inside the RTC probe. The IRQ is requested after the RTC device resource has been registered so that get_irq_byname is the last thing to happen. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-11-08rtc: da9063: GPL copyright inconsistency fixSteve Twiss1-9/+9
Fix misleading and inconsistent copyright header wording. Alter the copyright header text and MODULE_LICENSE macro to ensure the GPL v2 licence description is correctly represented. It will remove the incorrectly LGPL worded text. Words such as "Library" from the line "GNU Library General Public License"; and replace the word "library" with "program" in several other places. The copyright should match the GPL v2 description as specified in the GNU license found here: http://www.gnu.org/licenses/gpl-2.0.html It should also match this copyright text with the correct MODULE_LICENSE macro text as found in the kernel: include/linux/module.h In this case "GNU Public License v2 or later" is linked with "GPL". Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05rtc: Fix module autoload for OF platform driversJavier Martinez Canillas1-0/+1
These platform drivers have a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driverS Twiss1-112/+279
Add DA9062 RTC support into the existing DA9063 RTC driver component by using generic access tables for common register and bit mask definitions. The following change will add generic register and bit mask support to the DA9063 RTC. The changes are slightly complicated by requiring support for three register sets: DA9063-AD, DA9063-BB and DA9062-AA. The following alterations have been made to the DA9063 RTC: - Addition of a da9063_compatible_rtc_regmap structure to hold all generic registers and bitmasks for this type of RTC component. - A re-write of struct da9063 to use pointers for regmap and compatible registers/masks definitions - Addition of a of_device_id table for DA9063 and DA9062 defaults - Refactoring functions to use struct da9063_compatible_rtc accesses to generic registers/masks instead of using defines from registers.h - Re-work of da9063_rtc_probe() to use of_match_node() and dev_get_regmap() to provide initialisation of generic registers and masks and access to regmap Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-10-20rtc: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-28mfd: da9063: Add support for AD silicon variantOpensource [Steve Twiss]1-17/+37
Add register definitions for DA9063 AD (0x3) silicon variant ID the ability to choose the silicon variant at run-time using regmap configuration. This patch also adds RTC support for the AD silicon changes. It adds both BB and AD support as regmap ranges and then makes the distinction between the two tables at run-time. This allows both AD and BB silicon variants to be supported at the same time. Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-07rtc: da9063: RTC driverOpensource [Steve Twiss]1-0/+333
Add the RTC driver for DA9063. [akpm@linux-foundation.org: coding-style tweaks] Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Lee Jones <lee.jones@linaro.org> Cc: Mark Brown <broonie@linaro.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: David Dajun Chen <david.chen@diasemi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>