summaryrefslogtreecommitdiff
path: root/drivers/rpmsg
AgeCommit message (Collapse)AuthorFilesLines
2017-01-26rpmsg: virtio_rpmsg_bus: fix channel creationLoic Pallardy1-2/+2
commit 63447646ac657fde00bb658ce21a3431940ae0ad upstream. Since commit 4dffed5b3ac796b ("rpmsg: Name rpmsg devices based on channel id"), it is no more possible for a firmware to register twice a service (on different endpoints). rpmsg_register_device function is failing when calling device_add for the second time as second device has the same name as first one already register. It is because name is based only on service name and so is not more unique. Previously name was unique thanks to the use of rpmsg_dev_index. This patch adds destination and source endpoint numbers device name to create an unique identifier. Fixes: 4dffed5b3ac7 ("rpmsg: Name rpmsg devices based on channel id") Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Loic Pallardy <loic.pallardy@st.com> [bjorn: flipped name and address in device name] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12rpmsg: qcom_smd: Correct return value for O_NONBLOCKBjorn Andersson1-1/+1
commit 1d74e7ed5dc1903ac081574a9b6aa94e7ba4ad45 upstream. qcom_smd_send() should return -EAGAIN for non-blocking channels with insufficient space, so that we can propagate this event to user space. Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-12rpmsg: smd: fix dependency on QCOM_SMD=nArnd Bergmann1-1/+1
The ARM allmodconfig build broke with the addition of the SMD rpmsg driver that conflicts with the driver its replaces: WARNING: drivers/soc/qcom/smd: 'qcom_smd_register_edge' exported twice. Previous export was in drivers/rpmsg/qcom_smd.ko WARNING: drivers/soc/qcom/smd: 'qcom_smd_unregister_edge' exported twice. Previous export was in drivers/rpmsg/qcom_smd.ko There is already a dependency that is meant to avoid the broken configuration, but that only prevents the case where at least one of the two are built-in, but not if both are modules. This changes the dependency to "=n", to ensure that the new driver can only be enabled if the other one is completely disabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-09rpmsg: Introduce Qualcomm SMD backendBjorn Andersson3-0/+1445
This introduces a new rpmsg backend for the Qualcomm SMD system, allowing communication with various remote processors found in Qualcomm platforms. The implementation is based on, and intends to replace, drivers/soc/qcom/smd.c with the necessary adaptions for fitting with the rpmsg core. Based on original work by Sricharan R <sricharan@codeaurora.org> Cc: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-09rpmsg: Allow callback to return errorsBjorn Andersson1-4/+6
Some rpmsg backends support holding on to and redelivering messages upon failed handling of them, so provide a way for the callback to report and error and allow the backends to handle this. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-09rpmsg: Move virtio specifics from public headerBjorn Andersson1-0/+52
Move virtio rpmsg implementation details from the public header file to the virtio rpmsg implementation. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-09rpmsg: virtio: Hide vrp pointer from the public APIBjorn Andersson1-8/+35
Create a container struct virtio_rpmsg_channel around the rpmsg_channel to keep virtio backend information separate from the rpmsg and public API. This makes the public structures independant of virtio. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-09rpmsg: Hide rpmsg indirection tablesBjorn Andersson2-0/+50
Move the device and endpoint indirection tables to the rpmsg internal header file, to hide them from the public API. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-09rpmsg: Split rpmsg core and virtio backendBjorn Andersson3-223/+237
Extract the generic rpmsg core functionality from the virtio rpmsg implementation, splitting the implementation in a rpmsg core and a virtio backend. Based on initial work by Sricharan R <sricharan@codeaurora.org> Cc: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-09rpmsg: Split off generic tail of create_channel()Bjorn Andersson1-3/+15
The tail of create_channel() is common among all rpmsg backends, so split it off from the virtio specific part to allow it to be extracted to the rpmsg core. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-09rpmsg: Move helper for finding rpmsg devices to coreBjorn Andersson3-25/+68
Extract and move the helper function for finding rpmsg child devices to the core. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-09rpmsg: Move endpoint related interface to rpmsg coreBjorn Andersson2-13/+160
Move the rpmsg_send() and rpmsg_destroy_ept() interface to the rpmsg core, so that we eventually can hide the rpmsg_endpoint ops from the public API. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-09rpmsg: Indirection table for rpmsg_endpoint operationsBjorn Andersson1-3/+82
Add indirection table for rpmsg_endpoint related operations and move virtio implementation behind this, this finishes of the decoupling of the virtio implementation from the public API. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-09rpmsg: Move rpmsg_device API to new fileBjorn Andersson4-49/+77
Extract the now indirect rpmsg_create_ept() interface to a separate file and start building up a rpmsg core. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-09rpmsg: Introduce indirection table for rpmsg_device operationsBjorn Andersson1-6/+42
To allow for multiple backend implementations add an indireection table for rpmsg_device related operations and move the virtio implementation behind this table. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-09rpmsg: Clean up rpmsg device vs channel namingBjorn Andersson1-21/+21
The rpmsg device representing struct is called rpmsg_channel and the variable name used throughout is rpdev, with the communication happening on endpoints it's clearer to just call this a "device" in a public API. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-09rpmsg: Make rpmsg_create_ept() take channel_info structBjorn Andersson1-16/+10
As we introduce support for additional rpmsg backends, some of these only supports point-to-point "links" represented by a name. By making rpmsg_create_ept() take a channel_info struct we allow for these backends to either be passed a source address, a destination address or a name identifier. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-09rpmsg: rpmsg_send() operations takes rpmsg_endpointBjorn Andersson1-3/+3
The rpmsg_send() operations has been taking a rpmsg_device, but this forces users of secondary rpmsg_endpoints to use the rpmsg_sendto() interface - by extracting source and destination from the given data structures. If we instead pass the rpmsg_endpoint to these functions a service can use rpmsg_sendto() to respond to messages, even on secondary endpoints. In addition this would allow us to support operations on multiple channels in future backends that does not support off-channel operations. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-09rpmsg: Name rpmsg devices based on channel idBjorn Andersson1-10/+2
By basing rpmsg device names on channel id we end up with human readable device names in sysfs and debug logs. Reviewed-by: Sarangdhar Joshi <spjoshi@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-09rpmsg: Enable matching devices with drivers based on DTBjorn Andersson1-4/+6
Make it possible to match rpmsg devices based on device tree node, in addition to the id table. In some of these cases the rpmsg driver would not have a id_table, so make this optional. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-13rpmsg: use dynamic_hex_dump for hex dump tracesAnna, Suman1-6/+12
There are couple of print_hex_dump traces used in rpmsg code which prints the actual byte messages being transferred between host and the remote processors. These traces are quiet verbose and affects performance, if the appropriate trace level is enabled. These hex dumps are needed rather rarely, but are quite useful when debugging complex IPC corner cases. So, this patch switches these hex dump traces to use the dynamic_hex_dump() API. The hex dump traces are also enabled only when CONFIG_DYNAMIC_DEBUG is enabled. This switch allows flexibility of controlling these traces through dynamic debug, instead of removing them completely. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-13rpmsg: align code with open parenthesisAnna, Suman1-21/+19
This patch fixes most of the existing alignment checkpatch check warnings of the type "Alignment should match open parenthesis" in the virtio rpmsg bus code. A couple of them have been left as is to not exceed the 80-char limit. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-13rpmsg: use proper format-specifier for printing dma_addr_tAnna, Suman1-2/+2
The dma_addr_t types can be printed properly using the %pad printk format-specifier, there is no need to resort to the unsigned long long type-casting to deal with different possible type sizes. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-13rpmsg: remove pointless OOM printsAnna, Suman1-7/+3
These types of error prints are superfluous. The system will pick up on OOM issues and let the user know. While at this, fix the usage of using a structure instead of the actual variable in one of the allocations. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-13rpmsg: virtio_rpmsg_bus: Fix randomly placed semi-colonLee Jones1-1/+1
It should never have been there in the first place. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-10rpmsg: remove unneeded conversions to boolAndrew F. Davis1-1/+1
Found with scripts/coccinelle/misc/boolconv.cocci. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-05-06rpmsg: add THIS_MODULE to rpmsg_driver in rpmsg coreAndrew F. Davis1-3/+5
Add register_rpmsg_driver helper macro that adds THIS_MODULE to rpmsg_driver for the registering driver. We rename and modify the existing register_rpmsg_driver to enable this. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-01-12virtio: make find_vqs() checkpatch.pl-friendlyStefan Hajnoczi1-1/+1
checkpatch.pl wants arrays of strings declared as follows: static const char * const names[] = { "vq-1", "vq-2", "vq-3" }; Currently the find_vqs() function takes a const char *names[] argument so passing checkpatch.pl's const char * const names[] results in a compiler error due to losing the second const. This patch adjusts the find_vqs() prototype and updates all virtio transports. This makes it possible for virtio_balloon.c, virtio_input.c, virtgpu_kms.c, and virtio_rpmsg_bus.c to use the checkpatch.pl-friendly type. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
2015-03-13virtio_rpmsg: set DRIVER_OK before using deviceMichael S. Tsirkin1-1/+16
virtio spec requires that all drivers set DRIVER_OK before using devices. While rpmsg isn't yet included in the virtio 1 spec, previous spec versions also required this. virtio rpmsg violates this rule: is calls kick before setting DRIVER_OK. The fix isn't trivial since simply calling virtio_device_ready earlier would mean we might get an interrupt in parallel with adding buffers. Instead, split kick out to prepare+notify calls. prepare before virtio_device_ready - when we know we won't get interrupts. notify right afterwards. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-11-26rpmsg: use less buffers when vrings are smallSuman Anna1-14/+30
Adjust the number of rpmsg buffers to rely on the size of the vring, instead of using the hard coded value of 512 (256 per direction). This is needed when small vrings are being used, where 256 buffers are too much to fit in a vring. While considering the vring size, keep using the 512 hard coded value as an upper limit to avoid wacky resource tables consuming unreasonable amount of memory. NOTE: The number of buffers is already assumed to be symmetrical in each direction, and that logic is unchanged. Signed-off-by: Suman Anna <s-anna@ti.com> [edit commit message, small code and comment simplification] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-05-08Merge tag 'rpmsg-3.10' of ↵Linus Torvalds2-14/+36
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg Pull rpmsg changes from Ohad Ben-Cohen: "A small pull request consisting of: - Make rpmsg process all pending messages instead of just one, from Robert Tivy - Fix Kconfig dependency on VIRTUALIZATION, from Suman. Note: this was submitted late during the 3.9 rc cycle and it seemed appropriate to wait with it for the merge window. - Belated addition of an rpmsg entry to the MAINTAINERS file. People seem to look for this" * tag 'rpmsg-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg: rpmsg: fix kconfig dependencies for VIRTIO MAINTAINERS: add rpmsg entry rpmsg: process _all_ pending messages in rpmsg_recv_done
2013-05-03Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio & lguest updates from Rusty Russell: "Lots of virtio work which wasn't quite ready for last merge window. Plus I dived into lguest again, reworking the pagetable code so we can move the switcher page: our fixmaps sometimes take more than 2MB now..." Ugh. Annoying conflicts with the tcm_vhost -> vhost_scsi rename. Hopefully correctly resolved. * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (57 commits) caif_virtio: Remove bouncing email addresses lguest: improve code readability in lg_cpu_start. virtio-net: fill only rx queues which are being used lguest: map Switcher below fixmap. lguest: cache last cpu we ran on. lguest: map Switcher text whenever we allocate a new pagetable. lguest: don't share Switcher PTE pages between guests. lguest: expost switcher_pages array (as lg_switcher_pages). lguest: extract shadow PTE walking / allocating. lguest: make check_gpte et. al return bool. lguest: assume Switcher text is a single page. lguest: rename switcher_page to switcher_pages. lguest: remove RESERVE_MEM constant. lguest: check vaddr not pgd for Switcher protection. lguest: prepare to make SWITCHER_ADDR a variable. virtio: console: replace EMFILE with EBUSY for already-open port virtio-scsi: reset virtqueue affinity when doing cpu hotplug virtio-scsi: introduce multiqueue support virtio-scsi: push vq lock/unlock into virtscsi_vq_done virtio-scsi: pass struct virtio_scsi to virtqueue completion function ...
2013-04-30drivers/rpmsg/virtio_rpmsg_bus.c: fix error return code in rpmsg_probe()Wei Yongjun1-1/+3
Return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Tejun Heo <tj@kernel.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-21rpmsg: fix kconfig dependencies for VIRTIOSuman Anna1-0/+1
Fix this: warning: (VIRTIO_PCI && VIRTIO_MMIO && REMOTEPROC && RPMSG) selects VIRTIO which has unmet direct dependencies (VIRTUALIZATION) Cc: stable@vger.kernel.org Signed-off-by: Suman Anna <s-anna@ti.com> [edit commit log] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-15rpmsg: process _all_ pending messages in rpmsg_recv_doneRobert Tivy1-14/+35
Change virtqueue callback function rpmsg_recv_done() to process all available messages instead of just one message. Signed-off-by: Robert Tivy <rtivy@ti.com> [split _recv function instead of adding indentation] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-03-20virtio_rpmsg_bus: use simplified virtqueue accessors.Rusty Russell1-4/+4
We never add buffers with input and output parts, so use the new accessors. Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-02-28rpmsg: convert to idr_alloc()Tejun Heo1-18/+12
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28rpmsg: don't use idr_remove_all()Tejun Heo1-1/+0
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop its usage. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Assorted tiny fixes queued in trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (22 commits) DocBook: update EXPORT_SYMBOL entry to point at export.h Documentation: update top level 00-INDEX file with new additions ARM: at91/ide: remove unsused at91-ide Kconfig entry percpu_counter.h: comment code for better readability x86, efi: fix comment typo in head_32.S IB: cxgb3: delay freeing mem untill entirely done with it net: mvneta: remove unneeded version.h include time: x86: report_lost_ticks doesn't exist any more pcmcia: avoid static analysis complaint about use-after-free fs/jfs: Fix typo in comment : 'how may' -> 'how many' of: add missing documentation for of_platform_populate() btrfs: remove unnecessary cur_trans set before goto loop in join_transaction sound: soc: Fix typo in sound/codecs treewide: Fix typo in various drivers btrfs: fix comment typos Update ibmvscsi module name in Kconfig. powerpc: fix typo (utilties -> utilities) of: fix spelling mistake in comment h8300: Fix home page URL in h8300/README xtensa: Fix home page URL in Kconfig ...
2013-01-29Merge branch 'master' into for-nextJiri Kosina1-6/+4
Conflicts: drivers/devfreq/exynos4_bus.c Sync with Linus' tree to be able to apply patches that are against newer code (mvneta).
2013-01-11drivers/rpmsg: remove depends on CONFIG_EXPERIMENTALKees Cook1-2/+1
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Ohad Ben-Cohen <ohad@wizery.com> CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au>
2013-01-09treewide: Fix typo in various driversMasanari Iida1-1/+1
Correct spelling typo in printk within various drivers. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-04Drivers: misc: remove __dev* attributes.Greg Kroah-Hartman1-2/+2
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-18virtio: rpmsg: make it clear that virtqueue_add_buf() no longer returns > 0Rusty Russell1-4/+2
We simplified virtqueue_add_buf(), make it clear in the callers. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-10-07Merge branch 'virtio-next' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio changes from Rusty Russell: "New workflow: same git trees pulled by linux-next get sent straight to Linus. Git is awkward at shuffling patches compared with quilt or mq, but that doesn't happen often once things get into my -next branch." * 'virtio-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (24 commits) lguest: fix occasional crash in example launcher. virtio-blk: Disable callback in virtblk_done() virtio_mmio: Don't attempt to create empty virtqueues virtio_mmio: fix off by one error allocating queue drivers/virtio/virtio_pci.c: fix error return code virtio: don't crash when device is buggy virtio: remove CONFIG_VIRTIO_RING virtio: add help to CONFIG_VIRTIO option. virtio: support reserved vqs virtio: introduce an API to set affinity for a virtqueue virtio-ring: move queue_index to vring_virtqueue virtio_balloon: not EXPERIMENTAL any more. virtio-balloon: dependency fix virtio-blk: fix NULL checking in virtblk_alloc_req() virtio-blk: Add REQ_FLUSH and REQ_FUA support to bio path virtio-blk: Add bio-based IO path for virtio-blk virtio: console: fix error handling in init() function tools: Fix pthread flag for Makefile of trace-agent used by virtio-trace tools: Add guest trace agent as a user tool virtio/console: Allocate scatterlist according to the current pipe size ...
2012-09-28virtio: remove CONFIG_VIRTIO_RINGRusty Russell1-1/+0
Everyone who selects VIRTIO is also made to select VIRTIO_RING; just make them synonymous, since we removed the indirection layer some time ago. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-12rpmsg: fix dma_free_coherent dev parameterFernando Guzman Lugo1-3/+3
dma_alloc/free_coherent APIs requires the platform specific remoteproc device as the device parameter. We are passing vdev->dev.parent to the dma_free_coherent function which is the generic rproc device and it is wrong, it has to be vdev->dev.parent->parent instead, same as when we call dma_alloc_coherent function. Signed-off-by: Fernando Guzman Lugo <fernando.lugo@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-27Merge tag 'remoteproc-for-3.6' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc Pull remoteproc update from Ohad Ben-Cohen: - custom binary format support from Sjur Brændeland - groundwork for recovery and runtime pm support - some cleanups and API simplifications Fix up conflicts in drivers/remoteproc/remoteproc_core.c due to clashes with earlier cleanups by Sjur Brændeland (with part of the cleanups moved into the new remoteproc_elf_loader.c file). * tag 'remoteproc-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc: MAINTAINERS: add remoteproc's git remoteproc: Support custom firmware handlers remoteproc: Move Elf related functions to separate file remoteproc: Add function rproc_get_boot_addr remoteproc: Pass struct fw to load_segments and find_rsc_table. remoteproc: adopt the driver core's alloc/add/del/put naming remoteproc: remove the get_by_name/put API remoteproc: support non-iommu carveout assignment remoteproc: simplify unregister/free interfaces remoteproc: remove the now-redundant kref remoteproc: maintain a generic child device for each rproc remoteproc: allocate vrings on demand, free when not needed
2012-07-17rpmsg: fix dependency on initialization orderFederico Fuga1-1/+1
When rpmsg drivers are built into the kernel, they must not initialize before the rpmsg bus does, otherwise they'd trigger a BUG() in drivers/base/driver.c line 169 (driver_register()). To fix that, and to stop depending on arbitrary linkage ordering of those built-in rpmsg drivers, we make the rpmsg bus initialize at subsys_initcall. Cc: stable <stable@vger.kernel.org> Signed-off-by: Federico Fuga <fuga@studiofuga.com> [ohad: rewrite the commit log] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-06remoteproc: maintain a generic child device for each rprocOhad Ben-Cohen1-1/+2
For each registered rproc, maintain a generic remoteproc device whose parent is the low level platform-specific device (commonly a pdev, but it may certainly be any other type of device too). With this in hand, the resulting device hierarchy might then look like: omap-rproc.0 | - remoteproc0 <---- new ! | - virtio0 | - virtio1 | - rpmsg0 | - rpmsg1 | - rpmsg2 Where: - omap-rproc.0 is the low level device that's bound to the driver which invokes rproc_register() - remoteproc0 is the result of this patch, and will be added by the remoteproc framework when rproc_register() is invoked - virtio0 and virtio1 are vdevs that are registered by remoteproc when it realizes that they are supported by the firmware of the physical remote processor represented by omap-rproc.0 - rpmsg0, rpmsg1 and rpmsg2 are rpmsg devices that represent rpmsg channels, and are registerd by the rpmsg bus when it gets notified about their existence Technically, this patch: - changes 'struct rproc' to contain this generic remoteproc.x device - creates a new "remoteproc" type, to which this new generic remoteproc.x device belong to. - adds a super simple enumeration method for the indices of the remoteproc.x devices - updates all dev_* messaging to use the generic remoteproc.x device instead of the low level platform-specific device - updates all dma_* allocations to use the parent of remoteproc.x (where the platform-specific memory pools, most commonly CMA, are to be found) Adding this generic device has several merits: - we can now add remoteproc runtime PM support simply by hooking onto the new "remoteproc" type - all remoteproc log messages will now carry a common name prefix instead of having a platform-specific one - having a device as part of the rproc struct makes it possible to simplify refcounting (see subsequent patch) Thanks to Stephen Boyd <sboyd@codeaurora.org> for suggesting and discussing these ideas in one of the remoteproc review threads and to Fernando Guzman Lugo <fernando.lugo@ti.com> for trying them out with the (upcoming) runtime PM support for remoteproc. Cc: Fernando Guzman Lugo <fernando.lugo@ti.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-24 07:44:55 +0300