summaryrefslogtreecommitdiff
path: root/drivers/reset
AgeCommit message (Collapse)AuthorFilesLines
2019-07-20Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: - A driver for SCU (system control) on NXP i.MX8QXP - Qualcomm Always-on Subsystem messaging driver (AOSS QMP) - Qualcomm PM support for MSM8998 - Support for a newer version of DRAM PHY driver for Broadcom (DPFE) - Reset controller support for Bitmain BM1880 - TI SCI (System Control Interface) support for CPU control on AM654 processors - More TI sysc refactoring and rework" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits) reset: remove redundant null check on pointer dev soc: rockchip: work around clang warning dt-bindings: reset: imx7: Fix the spelling of 'indices' soc: imx: Add i.MX8MN SoC driver support soc: aspeed: lpc-ctrl: Fix probe error handling soc: qcom: geni: Add support for ACPI firmware: ti_sci: Fix gcc unused-but-set-variable warning firmware: ti_sci: Use the correct style for SPDX License Identifier soc: imx8: Use existing of_root directly soc: imx8: Fix potential kernel dump in error path firmware/psci: psci_checker: Park kthreads before stopping them memory: move jedec_ddr.h from include/memory to drivers/memory/ memory: move jedec_ddr_data.c from lib/ to drivers/memory/ MAINTAINERS: Remove myself as qcom maintainer soc: aspeed: lpc-ctrl: make parameter optional soc: qcom: apr: Don't use reg for domain id soc: qcom: fix QCOM_AOSS_QMP dependency and build errors memory: tegra: Fix -Wunused-const-variable firmware: tegra: Early resume BPMP soc/tegra: Select pinctrl for Tegra194 ...
2019-07-04Merge tag 'reset-for-v5.3' of git://git.pengutronix.de/git/pza/linux into ↵Olof Johansson2-1/+4
arm/drivers Reset controller changes for v5.3 This tag adds support for the Bitmain BM1880 reset controller to the reset-simple driver and fixes a spelling mistake in the i.MX7 reset controller binding document. * tag 'reset-for-v5.3' of git://git.pengutronix.de/git/pza/linux: dt-bindings: reset: imx7: Fix the spelling of 'indices' reset: Add reset controller support for BM1880 SoC dt-bindings: reset: Add devicetree binding for BM1880 reset controller Link: https://lore.kernel.org/r/1562236632.6641.14.camel@pengutronix.de Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-04Merge tag 'reset-fixes-for-v5.2' of git://git.pengutronix.de/git/pza/linux ↵Olof Johansson1-3/+0
into arm/drivers Reset controller fix for v5.2 This tag removes a redundant device pointer NULL check from __reset_control_get_from_lookup to fix a static code checker warning. * tag 'reset-fixes-for-v5.2' of git://git.pengutronix.de/git/pza/linux: reset: remove redundant null check on pointer dev Link: https://lore.kernel.org/r/1562236626.6641.13.camel@pengutronix.de Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-04reset: remove redundant null check on pointer devColin Ian King1-3/+0
Pointer dev is being dereferenced when passed to the inlined functon dev_name, however, dev is later being null checked so at first this seems like a potential null pointer dereference. In fact, _reset_control_get_from_lookup is only ever called from __reset_control_get, right after checking dev->of_node hence dev can never be null. Clean this up by removing the redundant null check. Thanks to Philipp Zabel for spotting that dev can never be null. Addresses-Coverity: ("Dereference before null check") Fixes: 6691dffab0ab ("reset: add support for non-DT systems") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner4-16/+4
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 101 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 285Thomas Gleixner2-18/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 100 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.918357685@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201Thomas Gleixner2-24/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner2-20/+2
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner8-40/+8
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24reset: Add reset controller support for BM1880 SoCManivannan Sadhasivam2-1/+4
Add reset controller support for Bitmain BM1880 SoC reusing the reset-simple driver. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner7-0/+7
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: Among the larger pieces: - Power management improvements for TI am335x and am437x (RTC suspend/wake) - Misc new additions for Amlogic (socinfo updates) - ZynqMP FPGA manager - Nvidia improvements for reset/powergate handling - PMIC wrapper for Mediatek MT8516 - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) soc: aspeed: fix Kconfig soc: add aspeed folder and misc drivers spi: zynqmp: Fix build break soc: imx: Add generic i.MX8 SoC driver MAINTAINERS: Update email for Qualcomm SoC maintainer memory: tegra: Fix a typos for "fdcdwr2" mc client Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+" memory: tegra: Replace readl-writel with mc_readl-mc_writel memory: tegra: Fix integer overflow on tick value calculation memory: tegra: Fix missed registers values latching ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30 optee: allow to work without static shared memory soc/tegra: pmc: Move powergate initialisation to probe soc/tegra: pmc: Remove reset sysfs entries on error soc/tegra: pmc: Fix reset sources and levels soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask fpga manager: Adding FPGA Manager support for Xilinx zynqmp dt-bindings: fpga: Add bindings for ZynqMP fpga driver firmware: xilinx: Add fpga API's ...
2019-04-29Merge tag 'tegra-for-5.2-soc' of ↵Olof Johansson1-14/+166
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers soc/tegra: Changes for v5.2-rc1 Besides a couple of fixes to better cope with deferred probing, this set of patches also implements the acquire/release protocol for resets used during powergate operations. This is necessary to allow these resets to be temporarily shared with other devices that may also need to control these resets. * tag 'tegra-for-5.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: pmc: Move powergate initialisation to probe soc/tegra: pmc: Remove reset sysfs entries on error soc/tegra: pmc: Fix reset sources and levels soc/tegra: pmc: Implement acquire/release for resets reset: Add acquire/release support for arrays reset: Add acquired flag to of_reset_control_array_get() reset: add acquired/released state for exclusive reset controls Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-24Merge tag 'drm/tegra/for-5.2-rc1' of ↵Dave Airlie1-14/+166
git://anongit.freedesktop.org/tegra/linux into drm-next drm/tegra: Changes for v5.2-rc1 This contains a fix for the usage of shared resets that previously generated a WARN on boot. In addition, there's a fix for CPU cache maintenance of GEM buffers allocated using get_pages(). (airlied: contains a merge from a shared tegra tree) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190418151447.9430-1-thierry.reding@gmail.com
2019-03-25reset: meson-audio-arb: Fix missing .owner setting of reset_controller_devAxel Lin1-0/+1
Set .owner to prevent module unloading while being used. Signed-off-by: Axel Lin <axel.lin@ingics.com> Fixes: d903779b58be ("reset: meson: add meson audio arb driver") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-03-20reset: Add acquire/release support for arraysThierry Reding1-1/+35
Add implementations that apply acquire and release operations to all reset controls part of a reset control array. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-03-20reset: Add acquired flag to of_reset_control_array_get()Thierry Reding1-3/+6
In order to be able to request an array of reset controls in acquired or released mode, add the acquired flag to of_reset_control_array_get() and pass the flag to subsequent calls of __of_reset_control_get(). Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-03-20reset: add acquired/released state for exclusive reset controlsPhilipp Zabel1-12/+127
There are cases where a driver needs explicit control over a reset line that is exclusively conneted to its device, but this control has to be temporarily handed over to the power domain controller to handle reset requirements during power transitions. Allow multiple exclusive reset controls to be requested in 'released' state for the same physical reset line, only one of which can be acquired at the same time. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-03-18drivers: Defer probe if firmware is not readyRajan Vaja1-4/+4
Driver needs ZynqMP firmware interface to call EEMI APIs. In case firmware is not ready, dependent drivers should wait until the firmware is ready. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-15Merge tag 'reset-for-5.1' of git://git.pengutronix.de/git/pza/linux into ↵Arnd Bergmann6-17/+303
arm/drivers Reset controller changes for v5.1 This adds the include/linux/reset directory to MAINTAINERS for reset specific headers and adds headers for sunxi and socfpga in there to get rid of a few extern function declarations. There is a new reset driver for the Broadcom STB reset controller and the i.MX7 system reset controller driver is extended to support i.MX8MQ as well. Finally, there is a new header with reset id constants for the Meson G12A SoC, which has a reset controller identical to Meson AXG and thus can reuse its driver and DT bindings. * tag 'reset-for-5.1' of git://git.pengutronix.de/git/pza/linux: dt-bindings: reset: meson: add g12a bindings reset: imx7: Add support for i.MX8MQ IP block variant reset: imx7: Add plubming to support multiple IP variants reset: Add Broadcom STB SW_INIT reset controller driver dt-bindings: reset: Add document for Broadcom STB reset controller reset: socfpga: declare socfpga_reset_init in a header file reset: sunxi: declare sun6i_reset_init in a header file MAINTAINERS: use include/linux/reset for reset controller related headers dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'zynqmp-soc-for-v5.1' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann2-0/+115
arm/drivers arm64: zynqmp: SoC changes for v5.1 - Extend firmware interface with reset, nvmem, power management and power domain support - Add reset, nvmem driver, power management and power domain drivers - * tag 'zynqmp-soc-for-v5.1' of https://github.com/Xilinx/linux-xlnx: drivers: soc: xilinx: Add ZynqMP power domain driver firmware: xilinx: Add APIs to control node status/power dt-bindings: power: Add ZynqMP power domain bindings drivers: soc: xilinx: Add ZynqMP PM driver firmware: xilinx: Implement ZynqMP power management APIs dt-bindings: soc: Add ZynqMP PM bindings nvmem: zynqmp: Added zynqmp nvmem firmware driver dt-bindings: nvmem: Add bindings for ZynqMP nvmem driver firmware: xilinx: Add zynqmp_pm_get_chipid() API reset: reset-zynqmp: Adding support for Xilinx zynqmp reset controller. dt-bindings: reset: Add bindings for ZynqMP reset driver firmware: xilinx: Add reset API's Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-29reset: reset-zynqmp: Adding support for Xilinx zynqmp reset controller.Nava kishore Manne2-0/+115
Add a reset controller driver for Xilinx Zynq UltraScale+ MPSoC. The zynqmp reset-controller has the ability to reset lines connected to different blocks and peripheral in the Soc. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-28reset: imx7: Add support for i.MX8MQ IP block variantAndrey Smirnov2-2/+124
Add bits and pieces needed to support IP block variant found on i.MX8MQ SoCs. Cc: p.zabel@pengutronix.de Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: cphealy@gmail.com Cc: l.stach@pengutronix.de Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> [p.zabel@pengutronix.de: fixed whitespace alignment] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-28reset: imx7: Add plubming to support multiple IP variantsAndrey Smirnov1-14/+36
In order to enable supporting i.MX8MQ with this driver, convert it to expect variant specific bits to be passed via driver data. Cc: p.zabel@pengutronix.de Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: cphealy@gmail.com Cc: l.stach@pengutronix.de Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-28reset: Add Broadcom STB SW_INIT reset controller driverFlorian Fainelli3-0/+141
Add support for resetting blocks through the Linux reset controller subsystem when reset lines are provided through a SW_INIT-style reset controller on Broadcom STB SoCs. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-28reset: socfpga: declare socfpga_reset_init in a header filePhilipp Zabel1-1/+1
Avoid declaring extern functions in c files. To make sure function definition and usage don't get out of sync, declare socfpga_reset_init in a common header. Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Dinh Nguyen <dinguyen@kernel.org>
2019-01-28reset: sunxi: declare sun6i_reset_init in a header filePhilipp Zabel1-0/+1
Avoid declaring extern functions in c files. To make sure function definition and usage don't get out of sync, declare sun6i_reset_init in a common header. Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: uniphier-glue: Add AHCI reset control support in glue layerKunihiko Hayashi1-0/+12
Add a reset line included in AHCI glue layer to enable AHCI core implemented in UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: uniphier-usb3: Rename to reset-uniphier-glueKunihiko Hayashi3-25/+25
This driver works for controlling the reset lines including USB3 glue layer, however, this can be applied to other glue layers. Now this patch renames the driver from "reset-uniphier-usb3" to "reset-uniphier-glue". At the same time, this changes CONFIG_RESET_UNIPHIER_USB3 to CONFIG_RESET_UNIPHIER_GLUE. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: socfpga: add an early reset driver for SoCFPGADinh Nguyen4-11/+101
Create a separate reset driver that uses the reset operations in reset-simple. The reset driver for the SoCFPGA platform needs to register early in order to be able bring online timers that needed early in the kernel bootup. We do not need this early reset driver for Stratix10, because on arm64, Linux does not need the timers are that in reset. Linux is able to run just fine with the internal armv8 timer. Thus, we use a new binding "altr,stratix10-rst-mgr" for the Stratix10 platform. The Stratix10 platform will continue to use the reset-simple platform driver, while the 32-bit platforms(Cyclone5/Arria5/Arria10) will use the early reset driver. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [p.zabel@pengutronix.de: fixed socfpga of_device_id in reset-simple] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: fix null pointer dereference on dev by dev_nameColin Ian King1-1/+2
The call to dev_name will dereference dev, however, dev is later being null checked, so there is a possibility of a null pointer dereference on dev by the call to dev_name. Fix this by null checking dev first before the call to dev_name Detected by CoverityScan, CID#1475475 ("Dereference before null check") Fixes: 2a6cb2b1d83b ("reset: Add reset_control_get_count()") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: Add reset_control_get_count()Geert Uytterhoeven1-0/+41
Currently the reset core has internal support for counting the number of resets for a device described in DT. Generalize this to devices using lookup resets, and export it for public use. This will be used by generic drivers that need to be sure a device is controlled by a single, dedicated reset line (e.g. vfio-platform). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [p.zabel@pengutronix.de: fixed a typo in reset_control_get_count comment] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07ARC: HSDK: improve reset driverEugeniy Paltsev1-0/+1
As for today HSDK reset driver implements only .reset() callback. In case of driver which implements one of standard reset controller usage pattern (call *_deassert() in probe(), call *_assert() in remove()) that leads to inoperability of this reset driver. Improve HSDK reset driver by calling .reset() callback inside of .deassert() callback to avoid each reset controller user adaptation for work with both reset methods (reset() and {.assert() & .deassert()} pair) Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-10-30Merge tag 'armsoc-drivers' of ↵Linus Torvalds4-7/+142
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "The most noteworthy SoC driver changes this time include: - The TEE subsystem gains an in-kernel interface to access the TEE from device drivers. - The reset controller subsystem gains a driver for the Qualcomm Snapdragon 845 Power Domain Controller. - The Xilinx Zynq platform now has a firmware interface for its platform management unit. This contains a firmware "ioctl" interface that was a little controversial at first, but the version we merged solved that by not exposing arbitrary firmware calls to user space. - The Amlogic Meson platform gains a "canvas" driver that is used for video processing and shared between different high-level drivers. The rest is more of the usual, mostly related to SoC specific power management support and core drivers in drivers/soc: - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new features related to power and reset control. - The Mediatek mt8183 and mt6765 SoC platforms gain support for their respective power management chips. - A new driver for NXP i.MX8, which need a firmware interface for power management. - The SCPI firmware interface now contains support estimating power usage of performance states - The NVIDIA Tegra "pmc" driver gains a few new features, in particular a pinctrl interface for configuring the pads. - Lots of small changes for Qualcomm, in particular the "smem" device driver. - Some cleanups for the TI OMAP series related to their sysc controller. Additional cleanups and bugfixes in SoC specific drivers include the Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits) firmware: tegra: bpmp: Implement suspend/resume support drivers: clk: Add ZynqMP clock driver dt-bindings: clock: Add bindings for ZynqMP clock driver firmware: xilinx: Add zynqmp IOCTL API for device control Documentation: xilinx: Add documentation for eemi APIs MAINTAINERS: imx: include drivers/firmware/imx path firmware: imx: add misc svc support firmware: imx: add SCU firmware driver support reset: Fix potential use-after-free in __of_reset_control_get() dt-bindings: arm: fsl: add scu binding doc soc: fsl: qbman: add interrupt coalesce changing APIs soc: fsl: bman_portals: defer probe after bman's probe soc: fsl: qbman: Use last response to determine valid bit soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers soc: fsl: qbman: Check if CPU is offline when initializing portals reset: qcom: PDC Global (Power Domain Controller) reset controller dt-bindings: reset: Add PDC Global binding for SDM845 SoCs reset: Grammar s/more then once/more than once/ bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS ...
2018-10-08reset: Fix potential use-after-free in __of_reset_control_get()Geert Uytterhoeven1-7/+8
Calling of_node_put() decreases the reference count of a device tree object, and may free some data. However, the of_phandle_args structure embedding it is passed to reset_controller_dev.of_xlate() after that, so it may still be accessed. Move the call to of_node_put() down to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [p.zabel@pengutronix.de: moved of_node_put after mutex_unlock] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-10-05reset: imx7: Add PCIE_CTRL_APPS_TURNOFFLeonard Crestez1-0/+1
This is required for the imx pci driver to send the PME_Turn_Off TLP. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org>
2018-10-05reset: qcom: PDC Global (Power Domain Controller) reset controllerSibi Sankar3-0/+134
Add reset controller for SDM845 SoCs to control reset signals provided by PDC Global for Modem, Compute, Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-08-26Merge tag 'armsoc-late' of ↵Linus Torvalds4-1/+177
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late updates from Olof Johansson: "A couple of late-merged changes that would be useful to get in this merge window: - Driver support for reset of audio complex on Meson platforms. The audio driver went in this merge window, and these changes have been in -next for a while (just not in our tree). - Power management fixes for IOMMU on Rockchip platforms, getting closer to kexec working on them, including Chromebooks. - Another pass updating "arm,psci" -> "psci" for some properties that have snuck in since last time it was done" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: iommu/rockchip: Move irq request past pm_runtime_enable iommu/rockchip: Handle errors returned from PM framework arm64: rockchip: Force CONFIG_PM on Rockchip systems ARM: rockchip: Force CONFIG_PM on Rockchip systems arm64: dts: Fix various entry-method properties to reflect documentation reset: imx7: Fix always writing bits as 0 reset: meson: add meson audio arb driver reset: meson: add dt-bindings for meson-axg audio arb
2018-08-24Merge tag 'reset-fixes-for-4.18' of git://git.pengutronix.de/git/pza/linux ↵Olof Johansson1-1/+1
into next/late Reset controller fixes for v4.18 This tag fixes reset assertion on i.MX7 for all non-inverted reset control bits. Currently only PCIE controller and PHY resets are used. * tag 'reset-fixes-for-4.18' of git://git.pengutronix.de/git/pza/linux: reset: imx7: Fix always writing bits as 0 Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-23Merge tag 'armsoc-drivers' of ↵Linus Torvalds6-0/+335
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits) drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 soc: sunxi: Add the A13, A23 and H3 system control compatibles reset: uniphier: add reset control support for SPI cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 reset: uniphier: add USB3 core reset control dt-bindings: reset: uniphier: add USB3 core reset support ...
2018-07-23reset: imx7: Fix always writing bits as 0Leonard Crestez1-1/+1
Right now the only user of reset-imx7 is pci-imx6 and the reset_control_assert and deassert calls on pciephy_reset don't toggle the PCIEPHY_BTN and PCIEPHY_G_RST bits as expected. Fix this by writing 1 or 0 respectively. The reference manual is not very clear regarding SRC_PCIEPHY_RCR but for other registers like MIPIPHY and HSICPHY the bits are explicitly documented as "1 means assert, 0 means deassert". The values are still reversed for IMX7_RESET_PCIE_CTRL_APPS_EN. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-20reset: meson: add meson audio arb driverJerome Brunet3-0/+176
The Amlogic Audio ARB is a simple device which enables or disables the access of Audio FIFOs to DDR on AXG based SoC. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-19reset: uniphier: add reset control support for SPIKunihiko Hayashi1-0/+9
Add reset control for SPI controller on UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-16reset: uniphier: add USB3 core reset controlKunihiko Hayashi3-0/+182
Add a reset line to enable USB3 core implemented in UniPhier SoCs. This reuses only the reset operations in reset-simple, because the reset-simple doesn't handle any SoC-dependent clocks and resets. This reset line is included in the USB3 glue layer, and it's necessary to enable clocks and deassert resets of the layer before using this reset line. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-16reset: simple: export reset_simple_ops to be referred from modulesKunihiko Hayashi1-0/+1
Allow reset_simple_ops to be referred from modules that use reset-simple framework by adding EXPORT_SYMBOL_GPL. Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-16reset: qcom: AOSS (always on subsystem) reset controllerSibi Sankar3-0/+143
Add reset controller driver for Qualcomm SDM845 SoC to control reset signals provided by AOSS for Modem, Venus ADSP, GPU, Camera, Wireless, Display subsystem Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap3-0/+3
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-13treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-1/+2
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-24 04:54:42 +0300