summaryrefslogtreecommitdiff
path: root/drivers/remoteproc
AgeCommit message (Collapse)AuthorFilesLines
2021-05-04Merge tag 'rproc-v5.13' of ↵Linus Torvalds24-253/+1426
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This adds support to the remoteproc core for detaching Linux from a running remoteproc, e.g. to reboot Linux while leaving the remoteproc running, and it enable this support in the stm32 remoteproc driver. It also introduces a property for memory carveouts to track if they are iomem or system ram, to enable proper handling of the differences. The imx_rproc received a number of fixes and improvements, in particular support for attaching to already running remote processors and i.MX8MQ and i.MX8MM support. The Qualcomm wcss driver gained support for starting and stopping the wireless subsystem on QCS404, when not using the TrustZone-based validator/loader. Finally it brings a few fixes to the TI PRU and to the firmware loader for the Qualcomm modem subsystem drivers" * tag 'rproc-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (53 commits) remoteproc: stm32: add capability to detach dt-bindings: remoteproc: stm32-rproc: add new mailbox channel for detach remoteproc: imx_rproc: support remote cores booted before Linux Kernel remoteproc: imx_rproc: move memory parsing to rproc_ops remoteproc: imx_rproc: enlarge IMX7D_RPROC_MEM_MAX remoteproc: imx_rproc: add missing of_node_put remoteproc: imx_rproc: fix build error without CONFIG_MAILBOX remoteproc: qcom: wcss: Remove unnecessary PTR_ERR() remoteproc: qcom: wcss: Fix wrong pointer passed to PTR_ERR() remoteproc: qcom: pas: Add modem support for SDX55 dt-bindings: remoteproc: qcom: pas: Add binding for SDX55 remoteproc: qcom: wcss: Fix return value check in q6v5_wcss_init_mmio() remoteproc: pru: Fix and cleanup firmware interrupt mapping logic remoteproc: pru: Fix wrong success return value for fw events remoteproc: pru: Fixup interrupt-parent logic for fw events remoteproc: qcom: wcnss: Allow specifying firmware-name remoteproc: qcom: wcss: explicitly request exclusive reset control remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404 dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for QCS404 remoteproc: qcom: wcss: populate hardcoded param using driver data ...
2021-04-14remoteproc: stm32: add capability to detachArnaud Pouliquen1-2/+37
A mechanism similar to the shutdown mailbox signal is implemented to detach a remote processor. Upon detachment, a signal is sent to the remote firmware, allowing it to perform specific actions such as stopping rpmsg communication. The Cortex-M hold boot is also disabled to allow the remote processor to restart in case of crash. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20210331073347.8293-3-arnaud.pouliquen@foss.st.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14remoteproc: imx_rproc: support remote cores booted before Linux KernelPeng Fan1-0/+45
- When remote cores are kicked before Linux Kernel, we are not able to get resource table from the firmware elf file, so we need to add rsc_table to hold the resource table published by remote cores and imx_rproc_get_loaded_rsc_table is to get the resource table. - Per remoteproc framework, add attach hook for processor in a detached state. - Add imx_rproc_detect_mode to detect remote cores' working mode to set the state which is required by remoteproc framework. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1617846289-13496-5-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14remoteproc: imx_rproc: move memory parsing to rproc_opsPeng Fan1-5/+3
Use the rproc_ops::prepare() hook for doing memory resources reallocation when reattaching a remote procesor. Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1617846289-13496-4-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14remoteproc: imx_rproc: enlarge IMX7D_RPROC_MEM_MAXPeng Fan1-5/+5
8 is not enough when we need more, such as resource table for remote cores that booted before Linux Kernel, so enlarge IMX7D_RPROC_MEM_MAX to 32. And also rename it to IMX_RPROC_MEM_MAX which make more sense. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/1617846289-13496-3-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14remoteproc: imx_rproc: add missing of_node_putPeng Fan1-0/+2
After of_parse_phandle, we need of_node_put to decrease the refcount of the device_node. Reported-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/1617846289-13496-2-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14remoteproc: imx_rproc: fix build error without CONFIG_MAILBOXWei Yongjun1-0/+1
Fix build error when CONFIG_MAILBOX is not set: arm-linux-gnueabi-ld: drivers/remoteproc/imx_rproc.o: in function `imx_rproc_kick': imx_rproc.c:(.text+0x328): undefined reference to `mbox_send_message' arm-linux-gnueabi-ld: drivers/remoteproc/imx_rproc.o: in function `imx_rproc_probe': imx_rproc.c:(.text+0x52c): undefined reference to `mbox_request_channel_byname' arm-linux-gnueabi-ld: imx_rproc.c:(.text+0x548): undefined reference to `mbox_request_channel_byname' arm-linux-gnueabi-ld: imx_rproc.c:(.text+0x76c): undefined reference to `mbox_free_channel' arm-linux-gnueabi-ld: imx_rproc.c:(.text+0x774): undefined reference to `mbox_free_channel' arm-linux-gnueabi-ld: imx_rproc.c:(.text+0x7c4): undefined reference to `mbox_free_channel' arm-linux-gnueabi-ld: drivers/remoteproc/imx_rproc.o: in function `imx_rproc_remove': imx_rproc.c:(.text+0x86c): undefined reference to `mbox_free_channel' arm-linux-gnueabi-ld: imx_rproc.c:(.text+0x874): undefined reference to `mbox_free_channel' make: *** [Makefile:1292: vmlinux] Error 1 Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Fixes: 2df7062002d0 ("remoteproc: imx_proc: enable virtio/mailbox") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210331122709.3935521-1-weiyongjun1@huawei.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14remoteproc: qcom: wcss: Remove unnecessary PTR_ERR()Junlin Yang1-8/+8
Remove unnecessary PTR_ERR(), it has been assigned to ret before, so return ret directly. Signed-off-by: Junlin Yang <yangjunlin@yulong.com> Link: https://lore.kernel.org/r/20210408143322.1647-1-angkery@163.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14remoteproc: qcom: wcss: Fix wrong pointer passed to PTR_ERR()Wei Yongjun1-1/+1
PTR_ERR should access the value just tested by IS_ERR, otherwise the wrong error code will be returned. This commit fix it by return 'ret' directly. Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 0af65b9b915e ("remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210326024741.841267-1-weiyongjun1@huawei.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-14remoteproc: qcom: pas: Add modem support for SDX55Manivannan Sadhasivam1-0/+17
Add remoteproc support for Hexagon modem found on the Qualcomm SDX55 platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408171211.92141-1-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13remoteproc: qcom: wcss: Fix return value check in q6v5_wcss_init_mmio()Wei Yongjun1-2/+2
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 0af65b9b915e ("remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210319094100.4185044-1-weiyongjun1@huawei.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13remoteproc: pru: Fix and cleanup firmware interrupt mapping logicSuman Anna1-5/+17
The PRU firmware interrupt mappings are configured and unconfigured in .start() and .stop() callbacks respectively using the variables 'evt_count' and a 'mapped_irq' pointer. These variables are modified only during these callbacks but are not re-initialized/reset properly during unwind or failure paths. These stale values caused a kernel crash while stopping a PRU remoteproc running a different firmware with no events on a subsequent run after a previous run that was running a firmware with events. Fix this crash by ensuring that the evt_count is 0 and the mapped_irq pointer is set to NULL in pru_dispose_irq_mapping(). Also, reset these variables properly during any failures in the .start() callback. While at this, the pru_dispose_irq_mapping() callsites are all made to look the same, moving any conditional logic to inside the function. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Fixes: c75c9fdac66e ("remoteproc: pru: Add support for PRU specific interrupt configuration") Reported-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Link: https://lore.kernel.org/r/20210407155641.5501-4-s-anna@ti.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13remoteproc: pru: Fix wrong success return value for fw eventsSuman Anna1-2/+4
The irq_create_fwspec_mapping() returns a proper virq value on success and 0 upon any failure. The pru_handle_intrmap() treats this as an error and disposes all firmware event mappings correctly, but is returning this incorrect value as is, letting the pru_rproc_start() interpret it as a success and boot the PRU. Fix this by returning an error value back upon any such failure. While at this, revise the error trace to print some meaningful info about the failed event. Fixes: c75c9fdac66e ("remoteproc: pru: Add support for PRU specific interrupt configuration") Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20210407155641.5501-3-s-anna@ti.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13remoteproc: pru: Fixup interrupt-parent logic for fw eventsSuman Anna1-3/+12
The PRU firmware interrupt mapping logic in pru_handle_intrmap() uses of_irq_find_parent() with PRU device node to get a handle to the PRUSS Interrupt Controller at present. This logic however requires that the PRU nodes always define a interrupt-parent property. This property is neither a required/defined property as per the PRU remoteproc binding, nor is relevant from a DT node point of view without any associated interrupts. The current logic finds a wrong interrupt controller and fails to perform proper mapping without any interrupt-parent property in the PRU nodes. Fix this logic to always find and use the sibling interrupt controller. Also, while at this, fix the acquired interrupt controller device node reference properly. Fixes: c75c9fdac66e ("remoteproc: pru: Add support for PRU specific interrupt configuration") Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20210407155641.5501-2-s-anna@ti.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: qcom: wcnss: Allow specifying firmware-nameBjorn Andersson1-1/+7
Introduce a firmware-name property, in order to be able to support device/platform specific firmware for the wireless connectivity subsystem; in line with other Qualcomm remoteproc drivers. Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210312002441.3273183-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: qcom: wcss: explicitly request exclusive reset controlGovind Singh1-3/+3
Use request exclusive reset control for wcss reset controls. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> Link: https://lore.kernel.org/r/1611859695-11824-5-git-send-email-gokulsri@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404Govind Singh1-38/+528
Add non PAS WCSS remoteproc driver support for QCS404 SOC. Add WCSS q6 bootup and shutdown sequence handled from Application Processor SubSystem(APSS). Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> Link: https://lore.kernel.org/r/1611859695-11824-4-git-send-email-gokulsri@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: qcom: wcss: populate hardcoded param using driver dataGovind Singh1-5/+24
Q6 based WiFi fw loading is supported across different targets, ex: IPQ8074/QCS404. In order to support different fw names/pas id etc, populate hardcoded param using driver data. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> Link: https://lore.kernel.org/r/1611859695-11824-2-git-send-email-gokulsri@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Refactor function rproc_cdev_release()Mathieu Poirier1-2/+8
Refactor function rproc_cdev_release() to take into account the current state of the remote processor when choosing the state to transition to. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20210312162453.1234145-18-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Properly deal with a detach request when attachedMathieu Poirier2-0/+10
This patch introduces the capability to detach a remote processor that has been attached to by the remoteproc core. For that to happen a rproc::ops::detach() operation needs to be available. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-17-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Properly deal with a stop request when attachedMathieu Poirier3-2/+8
Allow a remote processor that was started by another entity to be switched off by the remoteproc core. For that to happen a rproc::ops::stop() operation needs to be available. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-16-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Properly deal with a start request when attachedMathieu Poirier2-2/+4
This patch takes into account scenarios where a remote processor has been attached to when receiving a "start" command from sysfs. As with the case with the running state, the command can't be carried out if the remote processor is already in operation. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-15-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Properly deal with a kernel panic when attachedMathieu Poirier1-1/+5
The panic handler operation of registered remote processors should also be called when remote processors have been attached to. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-14-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Properly deal with the resource table when stoppingMathieu Poirier1-1/+47
When a remote processor that was attached to is stopped, special care must be taken to make sure the shutdown process is similar to what it would be had it been started by the remoteproc core. This patch takes care of that by making a copy of the resource table currently used by the remote processor. From that point on the copy is used, as if the remote processor had been started by the remoteproc core. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210312162453.1234145-13-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Properly deal with the resource table when detachingMathieu Poirier1-0/+81
If it is possible to detach the remote processor, keep an untouched copy of the resource table. That way we can start from the same resource table without having to worry about original values or what elements the startup code has changed when re-attaching to the remote processor. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-12-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Introduce function rproc_detach()Mathieu Poirier1-1/+57
Introduce function rproc_detach() to enable the remoteproc core to release the resources associated with a remote processor without stopping its operation. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-11-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Introduce function __rproc_detach()Mathieu Poirier1-0/+30
Introduce function __rproc_detach() to perform the same kind of operation as rproc_stop(), but instead of switching off the remote processor using rproc->ops->stop(), it uses rproc->ops->detach(). That way it is possible for the core to release the resources associated with a remote processor while the latter is kept operating. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-10-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: stm32: Move memory parsing to rproc_opsArnaud POULIQUEN2-23/+18
Some actions such as memory resources reallocation are needed when trying to reattach a co-processor. Use the prepare() operation for these actions. Co-developed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Arnaud POULIQUEN <arnaud.pouliquen@foss.st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-8-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: stm32: Move resource table setup to rproc_opsMathieu Poirier1-73/+68
Move the setting of the resource table installed by an external entity to rproc_ops::get_loaded_rsc_table(). This is to support scenarios where a remote processor has been attached to but is detached at a later stage. To re-attach the remote processor, the address of the resource table needs to be available at a later time than the platform driver's probe() function. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-7-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Add new get_loaded_rsc_table() to rproc_opsMathieu Poirier2-0/+42
Add a new get_loaded_rsc_table() operation in order to support scenarios where the remoteproc core has booted a remote processor and detaches from it. When re-attaching to the remote processor, the core needs to know where the resource table has been placed in memory. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-6-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Properly represent the attached stateMathieu Poirier2-23/+2
There is a need to know when a remote processor has been attached to rather than booted by the remoteproc core. In order to avoid manipulating two variables, i.e rproc::autonomous and rproc::state, get rid of the former and simply use the newly introduced RPROC_ATTACHED state. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-5-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Add new RPROC_ATTACHED stateMathieu Poirier1-0/+1
Add a new RPROC_ATTACHED state to take into account scenarios where the remoteproc core needs to attach to a remote processor that is booted by another entity. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-4-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Rename function rproc_actuate()Mathieu Poirier1-4/+4
Rename function rproc_actuate() to rproc_attach(). That way it is easy to understand that it does the opposite of rproc_detach(). Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-3-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Remove useless check in rproc_del()Mathieu Poirier1-3/+1
Whether started at probe() time or thereafter from the command line, a remote processor needs to be shut down before the final cleanup phases can happen. Otherwise the system may be left in an unpredictable state where the remote processor is expecting the remoteproc core to be providing services when in fact it no longer exist. Invariably calling rproc_shutdown() is fine since it will return immediately if the remote processor has already been switched off. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-2-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: qcom_q6v5_mss: Validate p_filesz in ELF loaderBjorn Andersson1-0/+18
Analog to the issue in the common mdt_loader code the MSS ELF loader does not validate that p_filesz bytes will fit in the memory region and that the loaded segments are not truncated. Fix this in the same way as proposed for the mdt_loader. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Fixes: 135b9e8d1cd8 ("remoteproc: qcom_q6v5_mss: Validate modem blob firmware size before load") Link: https://lore.kernel.org/r/20210312232002.3466791-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: qcom_q6v5_mss: Provide errors for firmware-name parsingBjorn Andersson1-2/+6
Failing to read the "firmware-name" DT property without informing the developer is annoying, add some helpful debug prints. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20210312002605.3273255-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-17remoteproc: pru: Fix firmware loading crashes on K3 SoCsSuman Anna1-1/+1
The K3 PRUs are 32-bit processors and in general have some limitations in using the standard ARMv8 memcpy function for loading firmware segments, so the driver already uses a custom memcpy implementation. This added logic however is limited to only IRAMs at the moment, but the loading into Data RAMs is not completely ok either and does generate a kernel crash for unaligned accesses. Fix these crashes by removing the existing IRAM logic limitation and extending the custom memcpy usage to Data RAMs as well for all K3 SoCs. Fixes: 1d39f4d19921 ("remoteproc: pru: Add support for various PRU cores on K3 AM65x SoCs") Signed-off-by: Suman Anna <s-anna@ti.com> Link: https://lore.kernel.org/r/20210315205859.19590-1-s-anna@ti.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-13remoteproc: imx_rproc: fix return value check in imx_rproc_addr_init()Wei Yongjun1-3/+2
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: ecadcc47492c ("remoteproc: imx_rproc: use devm_ioremap") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210312080420.277151-1-weiyongjun1@huawei.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: imx_proc: enable virtio/mailboxPeng Fan1-3/+113
Use virtio/mailbox to build connection between Remote Proccessors and Linux. Add work queue to handle incoming messages. Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Mathieu Poirier <mathieu.poirer@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1615029865-23312-11-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: imx_rproc: ignore mapping vdev regionsPeng Fan1-0/+3
vdev regions are vdev0vring0, vdev0vring1, vdevbuffer and similar. They are handled by remoteproc common code, no need to map in imx rproc driver. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/1615029865-23312-10-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: imx_rproc: support i.MX8MQ/MPeng Fan2-4/+43
Add i.MX8MQ dev/sys addr map and configuration data structure i.MX8MM share i.MX8MQ settings. Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1615029865-23312-9-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: imx_rproc: add i.MX specific parse fw hookPeng Fan1-0/+93
The hook is used to parse memory-regions and load resource table from the address the remote processor published. Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1615029865-23312-8-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: imx_rproc: use devm_ioremapPeng Fan1-1/+2
We might need to map an region multiple times, becaue the region might be shared between remote processors, such i.MX8QM with dual M4 cores. So use devm_ioremap, not devm_ioremap_resource. Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/1615029865-23312-7-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: imx_rproc: correct err messagePeng Fan1-2/+2
It is using devm_ioremap, so not devm_ioremap_resource. Correct the error message and print out sa/size. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1615029865-23312-6-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: add is_iomem to da_to_vaPeng Fan19-28/+44
Introduce an extra parameter is_iomem to da_to_va, then the caller could take the memory as normal memory or io mapped memory. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1615029865-23312-5-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: core: Remove casting to rproc_handle_resource_tJindong Yue1-13/+16
There are four different callback functions that are used for the rproc_handle_resource_t callback that all have different second parameter types. rproc_handle_vdev -> struct fw_rsc_vdev rproc_handle_trace -> struct fw_rsc_trace rproc_handle_devmem -> struct fw_rsc_devmem rproc_handle_carveout -> struct fw_rsc_carveout These callbacks are cast to rproc_handle_resource_t so that there is no error about incompatible pointer types. Unfortunately, this is a Clang's Control-Flow Integrity checking violation, which verifies that the callback function's types match the prototypes exactly before jumping. [ 7.275750] Kernel panic - not syncing: CFI failure (target: rproc_handle_vdev+0x0/0x4) [ 7.283763] CPU: 2 PID: 1 Comm: init Tainted: G C O 5.4.70-03301-g527af2c96672 #17 [ 7.292463] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 7.297779] Call trace: [ 7.300232] dump_backtrace.cfi_jt+0x0/0x4 [ 7.304337] show_stack+0x18/0x24 [ 7.307660] dump_stack+0xb8/0x114 [ 7.311069] panic+0x164/0x3d4 [ 7.314130] __ubsan_handle_cfi_check_fail_abort+0x0/0x14 [ 7.319533] perf_proc_update_handler+0x0/0xcc [ 7.323983] __cfi_check+0x63278/0x6a290 [ 7.327913] rproc_boot+0x3f8/0x738 [ 7.331404] rproc_add+0x68/0x110 [ 7.334738] imx_rproc_probe+0x5e4/0x708 [imx_rproc] [ 7.339711] platform_drv_probe+0xac/0xf0 [ 7.343726] really_probe+0x260/0x65c [ 7.347393] driver_probe_device+0x64/0x100 [ 7.351580] device_driver_attach+0x6c/0xac [ 7.355766] __driver_attach+0xdc/0x184 [ 7.359609] bus_for_each_dev+0x98/0x104 [ 7.363537] driver_attach+0x24/0x30 [ 7.367117] bus_add_driver+0x100/0x1e0 [ 7.370958] driver_register+0x78/0x114 [ 7.374800] __platform_driver_register+0x44/0x50 [ 7.379514] init_module+0x20/0xfe8 [imx_rproc] [ 7.384049] do_one_initcall+0x190/0x348 [ 7.387979] do_init_module+0x5c/0x210 [ 7.391731] load_module+0x2fbc/0x3590 [ 7.395485] __arm64_sys_finit_module+0xb8/0xec [ 7.400025] el0_svc_common+0xb4/0x19c [ 7.403777] el0_svc_handler+0x74/0x98 [ 7.407531] el0_svc+0x8/0xc [ 7.410419] SMP: stopping secondary CPUs [ 7.414648] Kernel Offset: disabled [ 7.418142] CPU features: 0x00010002,2000200c [ 7.422501] Memory Limit: none To fix this, change the second parameter of all functions to void * and use a local variable with the correct type so that everything works properly. With this, we can remove casting to rproc_handle_resource_t for these functions. Signed-off-by: Jindong Yue <jindong.yue@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20210224055825.7417-1-jindong.yue@nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: pru: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTEYang Li1-2/+2
Fix the following coccicheck warning: ./drivers/remoteproc/pru_rproc.c:247:0-23: WARNING: pru_rproc_debug_ss_fops should be defined with DEFINE_DEBUGFS_ATTRIBUTE Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1614154829-42461-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-08remoteproc: sysfs: Use sysfs_emit instead of sprintfRaghavendra Rao Ananta1-2/+2
For security reasons sysfs_emit() is preferred over sprintf(). Hence, convert the remoteproc's sysfs show functions accordingly. Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org> Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> Link: https://lore.kernel.org/r/1614808022-26062-1-git-send-email-sidgup@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-08remoteproc: pru: Fix loading of GNU Binutils ELFDimitar Dimitrov1-0/+18
PRU port of GNU Binutils lacks support for separate address spaces. PRU IRAM addresses are marked with artificial offset to differentiate them from DRAM addresses. Hence remoteproc must mask IRAM addresses coming from GNU ELF in order to get the true hardware address. PRU firmware used for testing was the example in: https://github.com/dinuxbg/pru-gcc-examples/tree/master/blinking-led/pru Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu> Link: https://lore.kernel.org/r/20201230105005.30492-1-dimitar@dinux.eu Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-08remoteproc: qcom: pil_info: avoid 64-bit divisionArnd Bergmann1-1/+1
On 32-bit machines with 64-bit resource_size_t, the driver causes a link failure because of the 64-bit division: arm-linux-gnueabi-ld: drivers/remoteproc/qcom_pil_info.o: in function `qcom_pil_info_store': qcom_pil_info.c:(.text+0x1ec): undefined reference to `__aeabi_uldivmod' Add a cast to an u32 to avoid this. If the resource exceeds 4GB, there are bigger problems. Fixes: 549b67da660d ("remoteproc: qcom: Introduce helper to store pil info in IMEM") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210103135628.3702427-1-arnd@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 20:25:53 +0300