| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 35c3f72a2d55dbf52f28f4ecae51c76be1acf545 ]
Prior to commit d935187cfb27 ("remoteproc: mediatek: Break lock
dependency to prepare_lock"), `scp->clk` was prepared and enabled only
when it needs to communicate with the SCP. The commit d935187cfb27
moved the prepare operation to remoteproc's prepare(), keeping the clock
prepared as long as the SCP is running.
The power consumption due to the prolonged clock preparation can be
negligible when the system is running, as SCP is designed to be a very
power efficient processor.
However, the clock remains prepared even when the system enters system
suspend. This prevents the underlying clock controller (and potentially
the parent PLLs) from shutting down, which increases power consumption
and may block the system from entering deep sleep states.
Add suspend and resume callbacks. Unprepare the clock in suspend() if
it was active and re-prepare it in resume() to ensure the clock is
properly disabled during system suspend, while maintaining the "always
prepared" semantics while the system is active. The driver doesn't
implement .attach() callback, hence it only checks for RPROC_RUNNING.
Fixes: d935187cfb27 ("remoteproc: mediatek: Break lock dependency to prepare_lock")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260206033034.3031781-1-tzungbi@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da994db94e60f9a9411108ddf4d1836147ad4c9c ]
The QMI message encoder has up until recently read a single byte (as
elem_size == 1), but with the introduction of big endian support it's
become apparent that this field is expected to be a full u32 -
regardless of the size of the length in the encoded message (which is
what elem_size specifies).
The result is that the encoder now reads past the length byte and
rejects the unreasonably large length formed when including the
following 3 bytes from the subsys_name array.
Fix this by changing to the expected type.
Fixes: 1fb82ee806d1 ("remoteproc: qcom: Introduce sysmon")
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Chris Lew <christopher.lew@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260220-qmi-encode-invalid-length-v2-1-5674be35ab29@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 26aa5295010ffaebcf8f1991c53fa7cf2ee1b20d ]
imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded
resource table even when the current firmware does not provide one.
When the device tree contains a "rsc-table" entry, priv->rsc_table is
non-NULL and denotes where a resource table would be located if one is
present in memory. However, when the current firmware has no resource
table, rproc->table_ptr is NULL. The function still returns
priv->rsc_table, and the remoteproc core interprets this as a valid loaded
resource table.
Fix this by returning NULL from imx_rproc_elf_find_loaded_rsc_table() when
there is no resource table for the current firmware (i.e. when
rproc->table_ptr is NULL). This aligns the function's semantics with the
remoteproc core: a loaded resource table is only reported when a valid
table_ptr exists.
With this change, starting firmware without a resource table no longer
triggers a crash.
Fixes: e954a1bd1610 ("remoteproc: imx_rproc: Use imx specific hook for find_loaded_rsc_table")
Cc: stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20260129-imx-rproc-fix-v3-1-fc4e41e6e750@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d935187cfb27fc4168f78f3959aef4eafaae76bb ]
A potential circular locking dependency (ABBA deadlock) exists between
`ec_dev->lock` and the clock framework's `prepare_lock`.
The first order (A -> B) occurs when scp_ipi_send() is called while
`ec_dev->lock` is held (e.g., within cros_ec_cmd_xfer()):
1. cros_ec_cmd_xfer() acquires `ec_dev->lock` and calls scp_ipi_send().
2. scp_ipi_send() calls clk_prepare_enable(), which acquires
`prepare_lock`.
See #0 in the following example calling trace.
(Lock Order: `ec_dev->lock` -> `prepare_lock`)
The reverse order (B -> A) is more complex and has been observed
(learned) by lockdep. It involves the clock prepare operation
triggering power domain changes, which then propagates through sysfs
and power supply uevents, eventually calling back into the ChromeOS EC
driver and attempting to acquire `ec_dev->lock`:
1. Something calls clk_prepare(), which acquires `prepare_lock`. It
then triggers genpd operations like genpd_runtime_resume(), which
takes `&genpd->mlock`.
2. Power domain changes can trigger regulator changes; regulator
changes can then trigger device link changes; device link changes
can then trigger sysfs changes. Eventually, power_supply_uevent()
is called.
3. This leads to calls like cros_usbpd_charger_get_prop(), which calls
cros_ec_cmd_xfer_status(), which then attempts to acquire
`ec_dev->lock`.
See #1 ~ #6 in the following example calling trace.
(Lock Order: `prepare_lock` -> `&genpd->mlock` -> ... -> `&ec_dev->lock`)
Move the clk_prepare()/clk_unprepare() operations for `scp->clk` to the
remoteproc prepare()/unprepare() callbacks. This ensures `prepare_lock`
is only acquired in prepare()/unprepare() callbacks. Since
`ec_dev->lock` is not involved in the callbacks, the dependency loop is
broken.
This means the clock is always "prepared" when the SCP is running. The
prolonged "prepared time" for the clock should be acceptable as SCP is
designed to be a very power efficient processor. The power consumption
impact can be negligible.
A simplified calling trace reported by lockdep:
> -> #6 (&ec_dev->lock)
> cros_ec_cmd_xfer
> cros_ec_cmd_xfer_status
> cros_usbpd_charger_get_port_status
> cros_usbpd_charger_get_prop
> power_supply_get_property
> power_supply_show_property
> power_supply_uevent
> dev_uevent
> uevent_show
> dev_attr_show
> sysfs_kf_seq_show
> kernfs_seq_show
> -> #5 (kn->active#2)
> kernfs_drain
> __kernfs_remove
> kernfs_remove_by_name_ns
> sysfs_remove_file_ns
> device_del
> __device_link_del
> device_links_driver_bound
> -> #4 (device_links_lock)
> device_link_remove
> _regulator_put
> regulator_put
> -> #3 (regulator_list_mutex)
> regulator_lock_dependent
> regulator_disable
> scpsys_power_off
> _genpd_power_off
> genpd_power_off
> -> #2 (&genpd->mlock/1)
> genpd_add_subdomain
> pm_genpd_add_subdomain
> scpsys_add_subdomain
> scpsys_probe
> -> #1 (&genpd->mlock)
> genpd_runtime_resume
> __rpm_callback
> rpm_callback
> rpm_resume
> __pm_runtime_resume
> clk_core_prepare
> clk_prepare
> -> #0 (prepare_lock)
> clk_prepare
> scp_ipi_send
> scp_send_ipi
> mtk_rpmsg_send
> rpmsg_send
> cros_ec_pkt_xfer_rpmsg
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20260112110755.2435899-1-tzungbi@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
channel is uninitialized
[ Upstream commit d62e0e92e589c53c4320ed5914af5fe103f5ce7e ]
Firmwares that do not use mailbox communication (e.g., the hello_world
sample) leave priv->tx_ch as NULL. The current suspend logic
unconditionally sends RP_MBOX_SUSPEND_SYSTEM, which is invalid without
an initialized TX channel.
Detect the no_mailboxes case early and skip sending the suspend
message. Instead, proceed directly to the runtime PM suspend path,
which is the correct behavior for firmwares that cannot respond to
mailbox requests.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/20251204122825.756106-1-iuliana.prodan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7e81fa8d809ed1e67ae9ecd52d20a20c2c65d877 ]
The "qcom,halt-regs" consists of a phandle reference followed by the
three offsets within syscon for halt registers. Thus, we need to
request 4 integers from of_property_read_variable_u32_array(), with
the halt_reg ofsets at indexes 1, 2, and 3. Offset 0 is the phandle.
With MAX_HALT_REG at 3, of_property_read_variable_u32_array() returns
-EOVERFLOW, causing .probe() to fail.
Increase MAX_HALT_REG to 4, and update the indexes accordingly.
Fixes: 0af65b9b915e ("remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404")
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://lore.kernel.org/r/20251129013207.3981517-1-mr.nuke.me@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 54898664e1eb6b5b3e6cdd9343c6eb15da776153 ]
A remoteproc could theoretically signal handover twice. This is unexpected
and would break the reference counting for the handover resources (power
domains, clocks, regulators, etc), so add a check to prevent that from
happening.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250820-rproc-qcom-q6v5-fixes-v2-2-910b1a3aff71@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 461edcf73eec57bc0006fbb5209f5012c514c58b ]
Use device life-cycle managed runtime enable function to simplify probe
and exit paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250814153940.670564-1-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
pru_rproc_set_ctable()
commit d41e075b077142bb9ae5df40b9ddf9fd7821a811 upstream.
pru_rproc_set_ctable() accessed rproc->priv before the IS_ERR_OR_NULL
check, which could lead to a null pointer dereference. Move the pru
assignment, ensuring we never dereference a NULL rproc pointer.
Fixes: 102853400321 ("remoteproc: pru: Add pru_rproc_set_ctable() function")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Link: https://lore.kernel.org/r/20250923112109.1165126-1-zhen.ni@easystack.cn
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 110be46f5afe27b66caa2d12473a84cd397b1925 ]
enable_irq() and disable_irq() are reference counted, so we must make sure
that each enable_irq() is always paired with a single disable_irq(). If we
call disable_irq() twice followed by just a single enable_irq(), the IRQ
will remain disabled forever.
For the error handling path in qcom_q6v5_wait_for_start(), disable_irq()
will end up being called twice, because disable_irq() also happens in
qcom_q6v5_unprepare() when rolling back the call to qcom_q6v5_prepare().
Fix this by dropping disable_irq() in qcom_q6v5_wait_for_start(). Since
qcom_q6v5_prepare() is the function that calls enable_irq(), it makes more
sense to have the rollback handled always by qcom_q6v5_unprepare().
Fixes: 3b415c8fb263 ("remoteproc: q6v5: Extract common resource handling")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250820-rproc-qcom-q6v5-fixes-v2-1-910b1a3aff71@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 496deecb020d14ba89ba7084fbc3024f91687023 ]
For the i.MX8X and i.MX8 family SoCs, when the Cortex-M core is powered
up and started by the Cortex-A core using the bootloader (e.g., via the
U-Boot bootaux command), both M-core and Linux run within the same SCFW
(System Controller Firmware) partition. With that, Linux has permission
to control the M-core.
But once the M-core is started by the bootloader, the SCFW automatically
enables its clock and sets the clock rate. If Linux later attempts to
enable the same clock via clk_prepare_enable(), the SCFW returns a
'LOCKED' error, as the clock is already configured by the SCFW. This
causes the probe function in imx_rproc.c to fail, leading to the M-core
power domain being shut down while the core is still running. This
results in a fault from the SCU (System Controller Unit) and triggers a
system reset.
To address this issue, ignore handling the clk for i.MX8X and i.MX8
M-core, as SCFW already takes care of enabling and configuring the
clock.
Suggested-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20250629172512.14857-3-hiagofranco@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit bcd241230fdbc6005230f80a4f8646ff5a84f15b upstream.
When rproc->state = RPROC_DETACHED is attached to remote processor
through rproc_attach(), if rproc_handle_resources() returns failure,
then the clean table should be released, otherwise the following
memory leak will occur.
unreferenced object 0xffff000086a99800 (size 1024):
comm "kworker/u12:3", pid 59, jiffies 4294893670 (age 121.140s)
hex dump (first 32 bytes):
00 00 00 00 00 80 00 00 00 00 00 00 00 00 10 00 ............
00 00 00 00 00 00 08 00 00 00 00 00 00 00 00 00 ............
backtrace:
[<000000008bbe4ca8>] slab_post_alloc_hook+0x98/0x3fc
[<000000003b8a272b>] __kmem_cache_alloc_node+0x13c/0x230
[<000000007a507c51>] __kmalloc_node_track_caller+0x5c/0x260
[<0000000037818dae>] kmemdup+0x34/0x60
[<00000000610f7f57>] rproc_boot+0x35c/0x56c
[<0000000065f8871a>] rproc_add+0x124/0x17c
[<00000000497416ee>] imx_rproc_probe+0x4ec/0x5d4
[<000000003bcaa37d>] platform_probe+0x68/0xd8
[<00000000771577f9>] really_probe+0x110/0x27c
[<00000000531fea59>] __driver_probe_device+0x78/0x12c
[<0000000080036a04>] driver_probe_device+0x3c/0x118
[<000000007e0bddcb>] __device_attach_driver+0xb8/0xf8
[<000000000cf1fa33>] bus_for_each_drv+0x84/0xe4
[<000000001a53b53e>] __device_attach+0xfc/0x18c
[<00000000d1a2a32c>] device_initial_probe+0x14/0x20
[<00000000d8f8b7ae>] bus_probe_device+0xb0/0xb4
unreferenced object 0xffff0000864c9690 (size 16):
Fixes: 9dc9507f1880 ("remoteproc: Properly deal with the resource table when detaching")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250430092043.1819308-3-xiaolei.wang@windriver.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
fails in rproc_attach()
commit 7692c9fbedd9087dc9050903f58095915458d9b1 upstream.
When rproc->state = RPROC_DETACHED and rproc_attach() is used
to attach to the remote processor, if rproc_handle_resources()
returns a failure, the resources allocated by imx_rproc_prepare()
should be released, otherwise the following memory leak will occur.
Since almost the same thing is done in imx_rproc_prepare() and
rproc_resource_cleanup(), Function rproc_resource_cleanup() is able
to deal with empty lists so it is better to fix the "goto" statements
in rproc_attach(). replace the "unprepare_device" goto statement with
"clean_up_resources" and get rid of the "unprepare_device" label.
unreferenced object 0xffff0000861c5d00 (size 128):
comm "kworker/u12:3", pid 59, jiffies 4294893509 (age 149.220s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 02 88 00 00 00 00 00 00 10 00 00 00 00 00 ............
backtrace:
[<00000000f949fe18>] slab_post_alloc_hook+0x98/0x37c
[<00000000adbfb3e7>] __kmem_cache_alloc_node+0x138/0x2e0
[<00000000521c0345>] kmalloc_trace+0x40/0x158
[<000000004e330a49>] rproc_mem_entry_init+0x60/0xf8
[<000000002815755e>] imx_rproc_prepare+0xe0/0x180
[<0000000003f61b4e>] rproc_boot+0x2ec/0x528
[<00000000e7e994ac>] rproc_add+0x124/0x17c
[<0000000048594076>] imx_rproc_probe+0x4ec/0x5d4
[<00000000efc298a1>] platform_probe+0x68/0xd8
[<00000000110be6fe>] really_probe+0x110/0x27c
[<00000000e245c0ae>] __driver_probe_device+0x78/0x12c
[<00000000f61f6f5e>] driver_probe_device+0x3c/0x118
[<00000000a7874938>] __device_attach_driver+0xb8/0xf8
[<0000000065319e69>] bus_for_each_drv+0x84/0xe4
[<00000000db3eb243>] __device_attach+0xfc/0x18c
[<0000000072e4e1a4>] device_initial_probe+0x14/0x20
Fixes: 10a3d4079eae ("remoteproc: imx_rproc: move memory parsing to rproc_ops")
Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250430092043.1819308-2-xiaolei.wang@windriver.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9995dbfc2235efabdb3759606d522e1a7ec3bdcb ]
Commit f3f11cfe8907 ("remoteproc: k3-r5: Acquire mailbox handle during
probe routine") introduced a check in the "k3_r5_rproc_mbox_callback()"
and "k3_r5_rproc_kick()" callbacks, causing them to exit if the remote
core's state is "RPROC_DETACHED". However, the "__rproc_attach()"
function that is responsible for attaching to a remote core, updates
the state of the remote core to "RPROC_ATTACHED" only after invoking
"rproc_start_subdevices()".
The "rproc_start_subdevices()" function triggers the probe of the Virtio
RPMsg devices associated with the remote core, which require that the
"k3_r5_rproc_kick()" and "k3_r5_rproc_mbox_callback()" callbacks are
functional. Hence, drop the check in the callbacks.
Fixes: f3f11cfe8907 ("remoteproc: k3-r5: Acquire mailbox handle during probe routine")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-2-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0cb4b1b97041d8a1f773425208ded253c1cb5869 ]
The device_del() call matches with the device_add() but we also need
to call put_device() to trigger the qcom_iris_release().
Fixes: 1fcef985c8bd ("remoteproc: qcom: wcnss: Fix race with iris probe")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/4604f7e0-3217-4095-b28a-3ff8b5afad3a@stanley.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4ca45af0a56d00b86285d6fdd720dca3215059a7 ]
Recent change to handle platforms with only single power domain broke
pronto-v3 which requires power domains and doesn't have fallback voltage
regulators in case power domains are missing. Add a check to verify
the number of fallback voltage regulators before using the code which
handles single power domain situation.
Fixes: 65991ea8a6d1 ("remoteproc: qcom_wcnss: Handle platforms with only single power domain")
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # sdm632-fairphone-fp3
Link: https://lore.kernel.org/r/20250511234026.94735-1-matti.lehtimaki@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 65991ea8a6d1e68effdc01d95ebe39f1653f7b71 ]
Both MSM8974 and MSM8226 have only CX as power domain with MX & PX being
handled as regulators. Handle this case by reodering pd_names to have CX
first, and handling that the driver core will already attach a single
power domain internally.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
[luca: minor changes]
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Link: https://lore.kernel.org/r/20250206-wcnss-singlepd-v2-2-9a53ee953dee@lucaweiss.eu
[bjorn: Added missing braces to else after multi-statement if]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4641840341f37dc8231e0840ec1514b4061b4322 ]
For example MSM8974 has mx voltage rail exposed as regulator and only cx
voltage rail is exposed as power domain. This power domain (cx) is
attached internally in power domain and cannot be attached in this driver.
Fixes: 8750cf392394 ("remoteproc: qcom_q6v5_mss: Allow replacing regulators with power domains")
Co-developed-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Link: https://lore.kernel.org/r/20250217-msm8226-modem-v5-4-2bc74b80e0ae@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ba785ff4162a65f18ed501019637a998b752b5ad ]
MSM8226 requires the CX power domain, so use the msm8996_adsp_resource
which has cx under proxy_pd_names and is otherwise equivalent.
Suggested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Fixes: fb4f07cc9399 ("remoteproc: qcom: pas: Add MSM8226 ADSP support")
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250128-pas-singlepd-v1-1-85d9ae4b0093@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e917b73234b02aa4966325e7380d2559bf127ba9 ]
Only go into the if condition for single-PD handling when there's
actually just one power domain specified there. Otherwise it'll be an
issue in the dts and we should fail in the regular code path.
This also mirrors the latest changes in the qcom_q6v5_mss driver.
Suggested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Fixes: 17ee2fb4e856 ("remoteproc: qcom: pas: Vote for active/proxy power domains")
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250128-pas-singlepd-v1-2-85d9ae4b0093@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit efdde3d73ab25cef4ff2d06783b0aad8b093c0e4 ]
There is case as below could trigger kernel dump:
Use U-Boot to start remote processor(rproc) with resource table
published to a fixed address by rproc. After Kernel boots up,
stop the rproc, load a new firmware which doesn't have resource table
,and start rproc.
When starting rproc with a firmware not have resource table,
`memcpy(loaded_table, rproc->cached_table, rproc->table_sz)` will
trigger dump, because rproc->cache_table is set to NULL during the last
stop operation, but rproc->table_sz is still valid.
This issue is found on i.MX8MP and i.MX9.
Dump as below:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af63000
[0000000000000000] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 UID: 0 PID: 1060 Comm: sh Not tainted 6.14.0-rc7-next-20250317-dirty #38
Hardware name: NXP i.MX8MPlus EVK board (DT)
pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __pi_memcpy_generic+0x110/0x22c
lr : rproc_start+0x88/0x1e0
Call trace:
__pi_memcpy_generic+0x110/0x22c (P)
rproc_boot+0x198/0x57c
state_store+0x40/0x104
dev_attr_store+0x18/0x2c
sysfs_kf_write+0x7c/0x94
kernfs_fop_write_iter+0x120/0x1cc
vfs_write+0x240/0x378
ksys_write+0x70/0x108
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x10c
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x30/0xcc
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x19c
Clear rproc->table_sz to address the issue.
Fixes: 9dc9507f1880 ("remoteproc: Properly deal with the resource table when detaching")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250319100106.3622619-1-peng.fan@oss.nxp.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 7378aeb664e5ebc396950b36a1f2dedf5aabec20 upstream.
In the rproc_alloc() function, on error, put_device(&rproc->dev) is
called, leading to the call of the rproc_type_release() function.
An error can occurs before ida_alloc is called.
In such case in rproc_type_release(), the condition (rproc->index >= 0) is
true as rproc->index has been initialized to 0.
ida_free() is called reporting a warning:
[ 4.181906] WARNING: CPU: 1 PID: 24 at lib/idr.c:525 ida_free+0x100/0x164
[ 4.186378] stm32-display-dsi 5a000000.dsi: Fixed dependency cycle(s) with /soc/dsi@5a000000/panel@0
[ 4.188854] ida_free called for id=0 which is not allocated.
[ 4.198256] mipi-dsi 5a000000.dsi.0: Fixed dependency cycle(s) with /soc/dsi@5a000000
[ 4.203556] Modules linked in: panel_orisetech_otm8009a dw_mipi_dsi_stm(+) gpu_sched dw_mipi_dsi stm32_rproc stm32_crc32 stm32_ipcc(+) optee(+)
[ 4.224307] CPU: 1 UID: 0 PID: 24 Comm: kworker/u10:0 Not tainted 6.12.0 #442
[ 4.231481] Hardware name: STM32 (Device Tree Support)
[ 4.236627] Workqueue: events_unbound deferred_probe_work_func
[ 4.242504] Call trace:
[ 4.242522] unwind_backtrace from show_stack+0x10/0x14
[ 4.250218] show_stack from dump_stack_lvl+0x50/0x64
[ 4.255274] dump_stack_lvl from __warn+0x80/0x12c
[ 4.260134] __warn from warn_slowpath_fmt+0x114/0x188
[ 4.265199] warn_slowpath_fmt from ida_free+0x100/0x164
[ 4.270565] ida_free from rproc_type_release+0x38/0x60
[ 4.275832] rproc_type_release from device_release+0x30/0xa0
[ 4.281601] device_release from kobject_put+0xc4/0x294
[ 4.286762] kobject_put from rproc_alloc.part.0+0x208/0x28c
[ 4.292430] rproc_alloc.part.0 from devm_rproc_alloc+0x80/0xc4
[ 4.298393] devm_rproc_alloc from stm32_rproc_probe+0xd0/0x844 [stm32_rproc]
[ 4.305575] stm32_rproc_probe [stm32_rproc] from platform_probe+0x5c/0xbc
Calling ida_alloc earlier in rproc_alloc ensures that the rproc->index is
properly set.
Fixes: 08333b911f01 ("remoteproc: Directly use ida_alloc()/free()")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241122175127.2188037-1-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 009e288c989b3fe548a45c82da407d7bd00418a9 ]
Enable support for the Audio DSP on the Qualcomm SAR2130P platform,
reusing the SM8350 resources.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241027-sar2130p-adsp-v1-3-bd204e39d24e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9091225ba28c0106d3cd041c7abf5551a94bb524 ]
Add support for PIL loading on ADSP, CDSP0, CDSP1, GPDSP0 and GPDSP1 on
SA8775p SoCs.
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240805-topic-sa8775p-iot-remoteproc-v4-3-86affdc72c04@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 009e288c989b ("remoteproc: qcom: pas: enable SAR2130P audio DSP support")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8de60bbab994bf8165d7d10e974872852da47aa7 ]
sc7180 has a dedicated ADSP similar to the one found in sm8250.
Add it's compatible to the driver reusing the existing config so
the devices that use the adsp can probe it.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230907-sc7180-adsp-rproc-v3-2-6515c3fbe0a3@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 009e288c989b ("remoteproc: qcom: pas: enable SAR2130P audio DSP support")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7b22b7719fc17d5979a991c918c868ab041be5c8 ]
Any write access to the IMEM region when the Q6 is setting up XPU
protection on it will result in a XPU violation. Fix this by ensuring
IMEM writes related to the MBA post-mortem logs happen before the Q6
is brought out of reset.
Fixes: 318130cc9362 ("remoteproc: qcom_q6v5_mss: Add MBA log extraction support")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240819073020.3291287-1-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e8983156d54f59f57e648ecd44f01c16572da842 ]
Specify minidump_id for the SM8350 DSPs. It was omitted for in the
original commit e8b4e9a21af7 ("remoteproc: qcom: pas: Add SM8350 PAS
remoteprocs").
Fixes: e8b4e9a21af7 ("remoteproc: qcom: pas: Add SM8350 PAS remoteprocs")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241027-sar2130p-adsp-v1-2-bd204e39d24e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e954a1bd16102abc800629f9900715d8ec4c3130 ]
If there is a resource table device tree node, use the address as
the resource table address, otherwise use the address(where
.resource_table section loaded) inside the Cortex-M elf file.
And there is an update in NXP SDK that Resource Domain Control(RDC)
enabled to protect TCM, linux not able to write the TCM space when
updating resource table status and cause kernel dump. So use the address
from device tree could avoid kernel dump.
Note: NXP M4 SDK not check resource table update, so it does not matter
use whether resource table address specified in elf file or in device
tree. But to reflect the fact that if people specific resource table
address in device tree, it means people are aware and going to use it,
not the address specified in elf file.
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20240719-imx_rproc-v2-2-10d0268c7eb1@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8fa052c29e509f3e47d56d7fc2ca28094d78c60a ]
Few times, core1 was scheduled to boot first before core0, which leads
to error:
'k3_r5_rproc_start: can not start core 1 before core 0'.
This was happening due to some scheduling between prepare and start
callback. The probe function waits for event, which is getting
triggered by prepare callback. To avoid above condition move event
trigger to start instead of prepare callback.
Fixes: 61f6f68447ab ("remoteproc: k3-r5: Wait for core0 power-up before powering up core1")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
[ Applied wakeup event trigger only for Split-Mode booted rprocs ]
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240820105004.2788327-1-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f3f11cfe890733373ddbb1ce8991ccd4ee5e79e1 ]
Acquire the mailbox handle during device probe and do not release handle
in stop/detach routine or error paths. This removes the redundant
requests for mbox handle later during rproc start/attach. This also
allows to defer remoteproc driver's probe if mailbox is not probed yet.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240808074127.2688131-3-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Stable-dep-of: 8fa052c29e50 ("remoteproc: k3-r5: Delay notification of wakeup event")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9ab27eb5866ccbf57715cfdba4b03d57776092fb upstream.
By simply bailing out, the driver was violating its rule and internal
assumptions that either both or no rproc should be initialized. E.g.,
this could cause the first core to be available but not the second one,
leading to crashes on its shutdown later on while trying to dereference
that second instance.
Fixes: 61f6f68447ab ("remoteproc: k3-r5: Wait for core0 power-up before powering up core1")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/9f481156-f220-4adf-b3d9-670871351e26@siemens.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 858e57c1d3dd7b92cc0fa692ba130a0a5d57e49d ]
Initialize workqueue before requesting mailbox channel, otherwise if
mailbox interrupt comes before workqueue ready, the imx_rproc_rx_callback
will trigger issue.
Fixes: 2df7062002d0 ("remoteproc: imx_proc: enable virtio/mailbox")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20240719-imx_rproc-v2-3-10d0268c7eb1@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c901f817792822eda9cec23814a4621fa3e66695 ]
The DDR Alias address should be 0x40000000 according to RM, so correct
it.
Fixes: 4ab8f9607aad ("remoteproc: imx_rproc: support i.MX8MQ/M")
Reported-by: Terry Lv <terry.lv@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20240719-imx_rproc-v2-1-10d0268c7eb1@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit dce68a49be26abf52712e0ee452a45fa01ab4624 upstream.
In imx_rproc_addr_init() strcmp() is performed over the node after the
of_node_put() is performed over it.
Fix this error by moving of_node_put() calls.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5e4c1243071d ("remoteproc: imx_rproc: support remote cores booted before Linux Kernel")
Cc: stable@vger.kernel.org
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240612131714.12907-1-amishin@t-argos.ru
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2fa26ca8b786888673689ccc9da6094150939982 upstream.
In imx_rproc_addr_init() "nph = of_count_phandle_with_args()" just counts
number of phandles. But phandles may be empty. So of_parse_phandle() in
the parsing loop (0 < a < nph) may return NULL which is later dereferenced.
Adjust this issue by adding NULL-return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a0ff4aa6f010 ("remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240606075204.12354-1-amishin@t-argos.ru
[Fixed title to fit within the prescribed 70-75 charcters]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c3281abea67c9c0dc6219bbc41d1feae05a16da3 upstream.
Manage interrupt coming from coprocessor also when state is
ATTACHED.
Fixes: 35bdafda40cc ("remoteproc: stm32_rproc: Add mutex protection for workqueue")
Cc: stable@vger.kernel.org
Signed-off-by: Gwenael Treuveur <gwenael.treuveur@foss.st.com>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20240521162316.156259-1-gwenael.treuveur@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1dc7242f6ee0c99852cb90676d7fe201cf5de422 upstream.
In case of errors during core start operation from sysfs, the driver
directly returns with the -EPERM error code. Fix this to ensure that
mailbox channels are freed on error before returning by jumping to the
'put_mbox' error handling label. Similarly, jump to the 'out' error
handling label to return with required -EPERM error code during the
core stop operation from sysfs.
Fixes: 3c8a9066d584 ("remoteproc: k3-r5: Do not allow core1 to power up before core0 via sysfs")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240506141849.1735679-1-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3c8a9066d584f5010b6f4ba03bf6b19d28973d52 upstream.
PSC controller has a limitation that it can only power-up the second
core when the first core is in ON state. Power-state for core0 should be
equal to or higher than core1.
Therefore, prevent core1 from powering up before core0 during the start
process from sysfs. Similarly, prevent core0 from shutting down before
core1 has been shut down from sysfs.
Fixes: 6dedbd1d5443 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240430105307.1190615-3-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 61f6f68447aba08aeaa97593af3a7d85a114891f upstream.
PSC controller has a limitation that it can only power-up the second core
when the first core is in ON state. Power-state for core0 should be equal
to or higher than core1, else the kernel is seen hanging during rproc
loading.
Make the powering up of cores sequential, by waiting for the current core
to power-up before proceeding to the next core, with a timeout of 2sec.
Add a wait queue event in k3_r5_cluster_rproc_init call, that will wait
for the current core to be released from reset before proceeding with the
next core.
Fixes: 6dedbd1d5443 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem")
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240430105307.1190615-2-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 331f91d86f71d0bb89a44217cc0b2a22810bbd42 upstream.
The IPI buffer location is read from the firmware that we load to the
System Companion Processor, and it's not granted that both the SRAM
(L2TCM) size that is defined in the devicetree node is large enough
for that, and while this is especially true for multi-core SCP, it's
still useful to check on single-core variants as well.
Failing to perform this check may make this driver perform R/W
operations out of the L2TCM boundary, resulting (at best) in a
kernel panic.
To fix that, check that the IPI buffer fits, otherwise return a
failure and refuse to boot the relevant SCP core (or the SCP at
all, if this is single core).
Fixes: 3efa0ea743b7 ("remoteproc/mediatek: read IPI buffer offset from FW")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240321084614.45253-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b327c72753d6a78de37aed6c35756f2ef62897ee ]
Recovery remote processor failed when wdg irq received:
[ 0.842574] remoteproc remoteproc0: crash detected in cix-dsp-rproc: type watchdog
[ 0.842750] remoteproc remoteproc0: handling crash #1 in cix-dsp-rproc
[ 0.842824] remoteproc remoteproc0: recovering cix-dsp-rproc
[ 0.843342] remoteproc remoteproc0: stopped remote processor cix-dsp-rproc
[ 0.847901] rproc-virtio rproc-virtio.0.auto: Failed to associate buffer
[ 0.847979] remoteproc remoteproc0: failed to probe subdevices for cix-dsp-rproc: -16
The reason is that dma coherent mem would not be released when
recovering the remote processor, due to rproc_virtio_remove()
would not be called, where the mem released. It will fail when
it try to allocate and associate buffer again.
Releasing reserved memory from rproc_virtio_dev_release(), instead of
rproc_virtio_remove().
Fixes: 1d7b61c06dc3 ("remoteproc: virtio: Create platform device for the remoteproc_virtio")
Signed-off-by: Joakim Zhang <joakim.zhang@cixtech.com>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231217053659.3245745-1-joakim.zhang@cixtech.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
stm32_rproc_get_loaded_rsc_tablef
[ Upstream commit c77b35ce66af25bdd6fde60b62e35b9b316ea5c2 ]
The sparse tool complains about the remove of the _iomem attribute.
stm32_rproc.c:660:17: warning: cast removes address space '__iomem' of expression
Add '__force' to explicitly specify that the cast is intentional.
This conversion is necessary to cast to addresses pointer,
which are then managed by the remoteproc core as a pointer to a
resource_table structure.
Fixes: 8a471396d21c ("remoteproc: stm32: Move resource table setup to rproc_ops")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20240117135312.3381936-3-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 32381bbccba4c21145c571701f8f7fb1d9b3a92e ]
The sparse tool complains about the attribute conversion between
a _iomem void * and a void *:
stm32_rproc.c:122:12: sparse: sparse: incorrect type in assignment (different address spaces) @@ expected void *va @@ got void [noderef] __iomem * @@
stm32_rproc.c:122:12: sparse: expected void *va
stm32_rproc.c:122:12: sparse: got void [noderef] __iomem *
Add '__force' to explicitly specify that the cast is intentional.
This conversion is necessary to cast to virtual addresses pointer,used,
by the remoteproc core.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312150052.HCiNKlqB-lkp@intel.com/
Fixes: 13140de09cc2 ("remoteproc: stm32: add an ST stm32_rproc driver")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20240117135312.3381936-2-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Support for booting the iMX remoteprocs using MMIO, instead of SMCCC
is added. The iMX driver is also extended to support delivering
interrupts from an arbitrary number of vdev.
Support is added to the TI PRU driver, to allow GPMUX to be controlled
from DeviceTree.
The Qualcomm coredump collector is extended to fall back to generating
a full coredump, in the case that the loaded firmware doesn't support
generating minidump. The overly terse MD abbreviation of "MINIDUMP" is
expanded, to make the code easier on the eye.
The list of Qualcomm Sensor Low Power Island (SLPI) instances
supported is cleaned up, and SDM845 is added. SDM630/636/660 support
for the modem subsystem (mss) is added.
All the Qualcomm drivers are transitioned to of_reserved_mem_lookup()
instead of open coding the resolution of reserved-memory regions, to
gain handling of error cases. A couple of drivers are transitioned to
use devm_platform_ioremap_resource_byname().
The stm32 remoteproc driver's PM operations are updated to modern
macros, to avoid the "unused variable"-warning in some configurations.
Drivers are transitioned away from directly including of_device.h"
* tag 'rproc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (23 commits)
remoteproc: pru: add support for configuring GPMUX based on client setup
remoteproc: stm32: fix incorrect optional pointers
remoteproc: imx_rproc: Switch iMX8MN/MP from SMCCC to MMIO
dt-bindings: remoteproc: imx_rproc: Support i.MX8MN/P MMIO
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Fix 8996 clocks
remoteproc: qcom: pas: add SDM845 SLPI compatible
remoteproc: qcom: q6v5-mss: Add support for SDM630/636/660
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Add SDM660 compatible
remoteproc: qcom: Expand MD_* as MINIDUMP_*
remoteproc: qcom: pas: refactor SLPI remoteproc init
dt-bindings: remoteproc: qcom: adsp: add qcom,sdm845-slpi-pas compatible
remoteproc: qcom: wcnss: use devm_platform_ioremap_resource_byname()
remoteproc: qcom: q6v5: use devm_platform_ioremap_resource_byname()
dt-bindings: remoteproc: qcom: sm6115-pas: Add QCM2290
remoteproc: qcom: Add full coredump fallback mechanism
remoteproc: core: Export the rproc coredump APIs
remoteproc: qcom: Use of_reserved_mem_lookup()
remoteproc: imx_rproc: iterate all notifiyids in rx callback
dt-bindings: remoteproc: qcom,adsp: bring back firmware-name
dt-bindings: remoteproc: qcom,sm8550-pas: require memory-region
...
|
|
The GPMUX config value for a PRU device can now be configured by client
by specifying it in the device node ti,pruss-gp-mux-sel.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20230802064925.1895750-1-danishanwar@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Compile-testing without CONFIG_OF shows that the of_match_ptr() macro
was used incorrectly here:
drivers/remoteproc/stm32_rproc.c:662:34: warning: unused variable 'stm32_rproc_match' [-Wunused-const-variable]
As in almost every driver, the solution is simply to remove the
use of this macro. The same thing happened with the deprecated
SIMPLE_DEV_PM_OPS(), but the corresponding warning was already shut
up with __maybe_unused annotations, so fix those as well by using the
correct DEFINE_SIMPLE_DEV_PM_OPS() macros and removing the extraneous
__maybe_unused modifiers. For completeness, also add a pm_ptr() to let
the PM ops be eliminated completely when CONFIG_PM is turned off.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307242300.ia82qBTp-lkp@intel.com
Fixes: 03bd158e1535 ("remoteproc: stm32: use correct format strings on 64-bit")
Fixes: 410119ee29b6 ("remoteproc: stm32: wakeup the system by wdg irq")
Fixes: 13140de09cc2 ("remoteproc: stm32: add an ST stm32_rproc driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20230724195704.2432382-1-arnd@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
With qmp_send() handling variable length messages and string formatting
he callers of qmp_send() can be cleaned up to not care about these
things.
Drop the QMP_MSG_LEN sized buffers and use the message formatting, as
appropriate.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811205839.727373-5-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The existing implementation of qmp_send() requires the caller to provide
a buffer which is of word-aligned. The underlying reason for this is
that message ram only supports word accesses, but pushing this
requirement onto the clients results in the same boiler plate code
sprinkled in every call site.
By using a temporary buffer in qmp_send() we can hide the underlying
hardware limitations from the clients and allow them to pass their
NUL-terminates C string directly.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811205839.727373-2-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The MX8M CM7 boot via SMC call is problematic, since not all versions
of ATF support this interface. Extend the MMIO support so it can boot
the CM7 on MX8MN/MP instead and discern the two alternatives using DT
compatible strings.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230724222418.163220-2-marex@denx.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Add a compatible for the SDM845 SLPI to the Qualcomm remoteproc q6v5_pas
driver. The SLPI is the same as in SM8150, SM8250, SM8350, and SM8450,
so use the same resource in the driver.
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230330164633.117335-4-me@dylanvanassche.be
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
