summaryrefslogtreecommitdiff
path: root/drivers/regulator
AgeCommit message (Collapse)AuthorFilesLines
2026-07-24regulator: scmi: fix of_node refcount leak in scmi_regulator_probe()Wentao Liang1-1/+3
[ Upstream commit fa11039d6cdff84584a3ef8cc1f5e1b56e045da2 ] scmi_regulator_probe() calls of_find_node_by_name() which takes a reference on the returned device node. On the error path where process_scmi_regulator_of_node() fails, the function returns without calling of_node_put() on the child node, leaking the reference. Add of_node_put(np) on the error path to properly release the reference. Cc: stable@vger.kernel.org Fixes: 0fbeae70ee7c ("regulator: add SCMI driver") Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Link: https://patch.msgid.link/20260527104850.872415-1-vulab@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-07-24regulator: scmi: Simplify with scoped for each OF child loopKrzysztof Kozlowski1-5/+3
[ Upstream commit 99cf5db9cdd39136fd5dbd10bda833aa0f870452 ] Use scoped for_each_available_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240814-cleanup-h-of-node-put-regulator-v1-7-87151088b883@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Stable-dep-of: fa11039d6cdf ("regulator: scmi: fix of_node refcount leak in scmi_regulator_probe()") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-07-24regulator: ltc3676: Fix incorrect IRQSTAT bit offsetsAbhishek Ojha1-5/+5
commit 50dce2e2f84b56d8b4b406d97a1543709e8a87f5 upstream. The LTC3676_IRQSTAT_* bit definitions do not match the IRQSTAT (Interrupt Request Status) register layout documented in Table 15 of the LTC3676/LTC3676-1 datasheet: bit 0 - Pushbutton Status Active bit 1 - Hard Reset Occurred bit 2 - PGOOD Timeout Occurred bit 3 - Undervoltage Warning bit 4 - Undervoltage Standby (Fault) Occurred bit 5 - Overtemperature Warning bit 6 - Overtemperature Standby (Fault) Occurred bit 7 - Reserved The driver instead defines these starting at bit 3, one bit higher than the datasheet specifies, which causes ltc3676_regulator_isr() to check the wrong status bits and misreport (or miss) PGOOD timeout, undervoltage and thermal warning/fault conditions. Fix the bit offsets to match the datasheet. Fixes: 37b918a034fe ("regulator: Add LTC3676 support") Cc: stable@vger.kernel.org Signed-off-by: Abhishek Ojha <Abhishek.ojha@savoirfairelinux.com> Link: https://patch.msgid.link/20260715170408.295552-1-Abhishek.ojha@savoirfairelinux.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-07-24regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCKTimur Tabi1-2/+2
[ Upstream commit d38f8bd771c4999b797d7074b348cf201414bd34 ] Compare against -EDEADLK, which is what ww_mutex_lock() actually returns and what every other deadlock check in this file already uses. Function regulator_lock_two() acquires two regulators via regulator_lock_nested() -> ww_mutex_lock(). On contention, ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop the lock it holds and retry the acquisition in the canonical order. However, regulator_lock_two() tests the return value against -EDEADLOCK rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are the same value, so the comparison happens to be correct and the bug is invisible. But on MIPS, SPARC, and PowerPC, those two errors have different values. The test is wrong: a genuine -EDEADLK backoff no longer matches -EDEADLOCK, so instead of unlocking and retrying, the code falls into WARN_ON(ret) and returns with only one of the two regulators locked. In practice, this is a bug only on MIPS, because the regulator core is not built or used on the other two platforms. In general, EDEADLK is preferred over EDEADLOCK for new code. Fixes: cba6cfdc7c3f ("regulator: core: Avoid lockdep reports when resolving supplies") Signed-off-by: Timur Tabi <ttabi@nvidia.com> Link: https://patch.msgid.link/20260708235722.2953579-1-ttabi@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-07-04regulator: core: fix locking in regulator_resolve_supply() error pathAndré Draszik1-1/+9
commit 497330b203d2c59c5ff3fa4c34d14494d7203bc3 upstream. If late enabling of a supply regulator fails in regulator_resolve_supply(), the code currently triggers a lockdep warning: WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596 ... Call trace: _regulator_put+0x80/0xa0 (P) regulator_resolve_supply+0x7cc/0xbe0 regulator_register_resolve_supply+0x28/0xb8 as the regulator_list_mutex must be held when calling _regulator_put(). To solve this, simply switch to using regulator_put(). While at it, we should also make sure that no concurrent access happens to our rdev while we clear out the supply pointer. Add appropriate locking to ensure that. While the code in question will be removed altogether in a follow-up commit, I believe it is still beneficial to have this corrected before removal for future reference. Fixes: 36a1f1b6ddc6 ("regulator: core: Fix memory leak in regulator_resolve_supply()") Fixes: 8e5356a73604 ("regulator: core: Clear the supply pointer if enabling fails") Signed-off-by: André Draszik <andre.draszik@linaro.org> Link: https://patch.msgid.link/20260109-regulators-defer-v2-2-1a25dc968e60@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Nazar Kalashnikov <nazarkalashnikov0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-17regulator: bd9571mwv: fix OF node reference imbalanceJohan Hovold1-1/+2
commit 8498100ee1d00422b8c5b161b3e332278b92a59a upstream. The driver reuses the OF node of the parent multi-function device but fails to take another reference to balance the one dropped by the platform bus code when unbinding the MFD and deregistering the child devices. Fix this by using the intended helper for reusing OF nodes. Fixes: e85c5a153fe2 ("regulator: Add ROHM BD9571MWV-M PMIC regulator driver") Cc: stable@vger.kernel.org # 4.12 Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://patch.msgid.link/20260408073055.5183-8-johan@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-17regulator: act8945a: fix OF node reference imbalanceJohan Hovold1-1/+2
commit 0d15ce31375ccef4162f960b34547a821b7619d2 upstream. The driver reuses the OF node of the parent multi-function device but fails to take another reference to balance the one dropped by the platform bus code when unbinding the MFD and deregistering the child devices. Fix this by using the intended helper for reusing OF nodes. Fixes: 38c09961048b ("regulator: act8945a: add regulator driver for ACT8945A") Cc: stable@vger.kernel.org # 4.6 Cc: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://patch.msgid.link/20260408073055.5183-7-johan@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-17regulator: rk808: fix OF node reference imbalanceJohan Hovold1-2/+1
commit 65290b24d8a5f0b8cd065201e653db824c4a4da6 upstream. The driver reuses the OF node of the parent multi-function device but fails to take another reference to balance the one dropped by the platform bus code when unbinding the MFD and deregistering the child devices. Fix this by using the intended helper for reusing OF nodes. Fixes: 647e57351f8e ("regulator: rk808: reduce 'struct rk808' usage") Cc: stable@vger.kernel.org # 6.2 Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://patch.msgid.link/20260408073055.5183-3-johan@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-17regulator: max77650: fix OF node reference imbalanceJohan Hovold1-1/+1
commit 2edaf5f7ada0ab5c9ec1f0836bd19779a8d85262 upstream. The driver reuses the OF node of the parent multi-function device but fails to take another reference to balance the one dropped by the platform bus code when unbinding the MFD and deregistering the child devices. Fix this by using the intended helper for reusing OF nodes. Fixes: bcc61f1c44fd ("regulator: max77650: add regulator support") Cc: stable@vger.kernel.org # 5.1 Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://patch.msgid.link/20260408073055.5183-4-johan@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-17regulator: mt6357: fix OF node reference imbalanceJohan Hovold1-1/+1
commit 2f38e96c273e15f5e9f5d1fc2c0cbba703751602 upstream. The driver reuses the OF node of the parent multi-function device but fails to take another reference to balance the one dropped by the platform bus code when unbinding the MFD and deregistering the child devices. Fix this by using the intended helper for reusing OF nodes. Fixes: dafc7cde23dc ("regulator: add mt6357 regulator") Cc: stable@vger.kernel.org # 6.2 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://patch.msgid.link/20260408073055.5183-5-johan@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-25regulator: pca9450: Correct interrupt typePeng Fan1-1/+1
[ Upstream commit 5d0efaf47ee90ac60efae790acee3a3ed99ebf80 ] Kernel warning on i.MX8MP-EVK when doing module test: irq: type mismatch, failed to map hwirq-3 for gpio@30200000! Per PCA945[X] specification: The IRQ_B pin is pulled low when any unmasked interrupt bit status is changed and it is released high once application processor read INT1 register. So the interrupt should be configured as IRQF_TRIGGER_LOW, not IRQF_TRIGGER_FALLING. Fixes: 0935ff5f1f0a4 ("regulator: pca9450: add pca9450 pmic driver") Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://patch.msgid.link/20260310-pca9450-irq-v1-1-36adf52c2c55@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-25regulator: pca9450: Make IRQ optionalFrieder Schrempf1-22/+19
[ Upstream commit 83808c54064eef620ad8645dfdcaffe125551532 ] The IRQ line might not be connected on some boards. Allow the driver to be probed without it. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Link: https://patch.msgid.link/20240708084107.38986-5-frieder@fris.de Signed-off-by: Mark Brown <broonie@kernel.org> Stable-dep-of: 5d0efaf47ee9 ("regulator: pca9450: Correct interrupt type") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04regulator: core: move supply check earlier in set_machine_constraints()André Draszik1-25/+30
[ Upstream commit 86a8eeb0e913f4b6a55dabba5122098d4e805e55 ] Since commit 98e48cd9283d ("regulator: core: resolve supply for boot-on/always-on regulators"), set_machine_constraints() can return -EPROBE_DEFER very late, after it has done a lot of work and configuration of the regulator. This means that configuration will happen multiple times for no benefit in that case. Furthermore, this can lead to timing-dependent voltage glitches as mentioned e.g. in commit 8a866d527ac0 ("regulator: core: Resolve supply name earlier to prevent double-init"). We can know that it's going to fail very early, in particular before going through the complete regulator configuration by moving some code around a little. Do so to avoid re-configuring the regulator multiple times, also avoiding the voltage glitches if we can. Fixes: 98e48cd9283d ("regulator: core: resolve supply for boot-on/always-on regulators") Signed-off-by: André Draszik <andre.draszik@linaro.org> Link: https://patch.msgid.link/20260109-regulators-defer-v2-3-1a25dc968e60@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11regulator: core: Protect regulator_supply_alias_list with regulator_list_mutexsparkhuang1-12/+20
[ Upstream commit 0cc15a10c3b4ab14cd71b779fd5c9ca0cb2bc30d ] regulator_supply_alias_list was accessed without any locking in regulator_supply_alias(), regulator_register_supply_alias(), and regulator_unregister_supply_alias(). Concurrent registration, unregistration and lookups can race, leading to: 1 use-after-free if an alias entry is removed while being read, 2 duplicate entries when two threads register the same alias, 3 inconsistent alias mappings observed by consumers. Protect all traversals, insertions and deletions on regulator_supply_alias_list with the existing regulator_list_mutex. Fixes: a06ccd9c3785f ("regulator: core: Add ability to create a lookup alias for supply") Signed-off-by: sparkhuang <huangshaobo3@xiaomi.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20251127025716.5440-1-huangshaobo3@xiaomi.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11regulator: core: disable supply if enabling main regulator failsGabor Juhos1-0/+5
[ Upstream commit fb1ebb10468da414d57153ddebaab29c38ef1a78 ] For 'always-on' and 'boot-on' regulators, the set_machine_constraints() may enable supply before enabling the main regulator, however if the latter fails, the function returns with an error but the supply remains enabled. When this happens, the regulator_register() function continues on the error path where it puts the supply regulator. Since enabling the supply is not balanced with a disable call, a warning similar to the following gets issued from _regulator_put(): [ 1.603889] WARNING: CPU: 2 PID: 44 at _regulator_put+0x8c/0xa0 [ 1.603908] Modules linked in: [ 1.603926] CPU: 2 UID: 0 PID: 44 Comm: kworker/u16:3 Not tainted 6.18.0-rc4 #0 NONE [ 1.603938] Hardware name: Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7 (DT) [ 1.603945] Workqueue: async async_run_entry_fn [ 1.603958] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.603967] pc : _regulator_put+0x8c/0xa0 [ 1.603976] lr : _regulator_put+0x7c/0xa0 ... [ 1.604140] Call trace: [ 1.604145] _regulator_put+0x8c/0xa0 (P) [ 1.604156] regulator_register+0x2ec/0xbf0 [ 1.604166] devm_regulator_register+0x60/0xb0 [ 1.604178] rpm_reg_probe+0x120/0x208 [ 1.604187] platform_probe+0x64/0xa8 ... In order to avoid this, change the set_machine_constraints() function to disable the supply if enabling the main regulator fails. Fixes: 05f224ca6693 ("regulator: core: Clean enabling always-on regulators + their supplies") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://patch.msgid.link/20251107-regulator-disable-supply-v1-1-c95f0536f1b5@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24regulator: fixed: fix GPIO descriptor leak on register failureHaotian Zhang1-0/+1
[ Upstream commit 636f4618b1cd96f6b5a2b8c7c4f665c8533ecf13 ] In the commit referenced by the Fixes tag, devm_gpiod_get_optional() was replaced by manual GPIO management, relying on the regulator core to release the GPIO descriptor. However, this approach does not account for the error path: when regulator registration fails, the core never takes over the GPIO, resulting in a resource leak. Add gpiod_put() before returning on regulator registration failure. Fixes: 5e6f3ae5c13b ("regulator: fixed: Let core handle GPIO descriptor") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Link: https://patch.msgid.link/20251028172828.625-1-vulab@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-15regulator: scmi: Use int type to store negative error codesQianfeng Rong1-1/+2
[ Upstream commit 9d35d068fb138160709e04e3ee97fe29a6f8615b ] Change the 'ret' variable from u32 to int to store negative error codes or zero returned by of_property_read_u32(). Storing the negative error codes in unsigned type, doesn't cause an issue at runtime but it's ugly as pants. Additionally, assigning negative error codes to unsigned type may trigger a GCC warning when the -Wsign-conversion flag is enabled. No effect on runtime. Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Fixes: 0fbeae70ee7c ("regulator: add SCMI driver") Link: https://patch.msgid.link/20250829101411.625214-1-rongqianfeng@vivo.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19regulator: sy7636a: fix lifecycle of power good gpioAndreas Kemnade1-3/+4
[ Upstream commit c05d0b32eebadc8be6e53196e99c64cf2bed1d99 ] Attach the power good gpio to the regulator device devres instead of the parent device to fix problems if probe is run multiple times (rmmod/insmod or some deferral). Fixes: 8c485bedfb785 ("regulator: sy7636a: Initial commit") Signed-off-by: Andreas Kemnade <akemnade@kernel.org> Reviewed-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peng Fan <peng.fan@nxp.com> Message-ID: <20250906-sy7636-rsrc-v1-2-e2886a9763a7@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-01regulator: core: fix NULL dereference on unbind due to stale coupling dataAlessandro Carminati1-0/+1
[ Upstream commit ca46946a482238b0cdea459fb82fc837fb36260e ] Failing to reset coupling_desc.n_coupled after freeing coupled_rdevs can lead to NULL pointer dereference when regulators are accessed post-unbind. This can happen during runtime PM or other regulator operations that rely on coupling metadata. For example, on ridesx4, unbinding the 'reg-dummy' platform device triggers a panic in regulator_lock_recursive() due to stale coupling state. Ensure n_coupled is set to 0 to prevent access to invalid pointers. Signed-off-by: Alessandro Carminati <acarmina@redhat.com> Link: https://patch.msgid.link/20250626083809.314842-1-acarmina@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-24regulator: pwm-regulator: Manage boot-on with disabled PWM channelsMartin Blumenstingl1-0/+33
commit b3cbdcc191819b75c04178142e2d0d4c668f68c0 upstream. Odroid-C1 uses a Monolithic Power Systems MP2161 controlled via PWM for the VDDEE voltage supply of the Meson8b SoC. Commit 6b9352f3f8a1 ("pwm: meson: modify and simplify calculation in meson_pwm_get_state") results in my Odroid-C1 crashing with memory corruption in many different places (seemingly at random). It turns out that this is due to a currently not supported corner case. The VDDEE regulator can generate between 860mV (duty cycle of ~91%) and 1140mV (duty cycle of 0%). We consider it to be enabled by the bootloader (which is why it has the regulator-boot-on flag in .dts) as well as being always-on (which is why it has the regulator-always-on flag in .dts) because the VDDEE voltage is generally required for the Meson8b SoC to work. The public S805 datasheet [0] states on page 17 (where "A5" refers to the Cortex-A5 CPU cores): [...] So if EE domains is shut off, A5 memory is also shut off. That does not matter. Before EE power domain is shut off, A5 should be shut off at first. It turns out that at least some bootloader versions are keeping the PWM output disabled. This is not a problem due to the specific design of the regulator: when the PWM output is disabled the output pin is pulled LOW, effectively achieving a 0% duty cycle (which in return means that VDDEE voltage is at 1140mV). The problem comes when the pwm-regulator driver tries to initialize the PWM output. To do so it reads the current state from the hardware, which is: period: 3666ns duty cycle: 3333ns (= ~91%) enabled: false Then those values are translated using the continuous voltage range to 860mV. Later, when the regulator is being enabled (either by the regulator core due to the always-on flag or first consumer - in this case the lima driver for the Mali-450 GPU) the pwm-regulator driver tries to keep the voltage (at 860mV) and just enable the PWM output. This is when things start to go wrong as the typical voltage used for VDDEE is 1100mV. Commit 6b9352f3f8a1 ("pwm: meson: modify and simplify calculation in meson_pwm_get_state") triggers above condition as before that change period and duty cycle were both at 0. Since the change to the pwm-meson driver is considered correct the solution is to be found in the pwm-regulator driver. Update the duty cycle during driver probe if the regulator is flagged as boot-on so that a call to pwm_regulator_enable() (by the regulator core during initialization of a regulator flagged with boot-on) without any preceding call to pwm_regulator_set_voltage() does not change the output voltage. [0] https://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://msgid.link/r/20240113224628.377993-4-martin.blumenstingl@googlemail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-24regulator: pwm-regulator: Calculate the output voltage for disabled PWMsMartin Blumenstingl1-0/+7
commit 6a7d11efd6915d80a025f2a0be4ae09d797b91ec upstream. If a PWM output is disabled then it's voltage has to be calculated based on a zero duty cycle (for normal polarity) or duty cycle being equal to the PWM period (for inverted polarity). Add support for this to pwm_regulator_get_voltage(). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://msgid.link/r/20240113224628.377993-3-martin.blumenstingl@googlemail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-10regulator: fan53555: add enable_time support and soft-start timesHeiko Stuebner1-0/+14
[ Upstream commit 8acfb165a492251a08a22a4fa6497a131e8c2609 ] The datasheets for all the fan53555 variants (and clones using the same interface) define so called soft start times, from enabling the regulator until at least some percentage of the output (i.e. 92% for the rk860x types) are available. The regulator framework supports this with the enable_time property but currently the fan53555 driver does not define enable_times for any variant. I ran into a problem with this while testing the new driver for the Rockchip NPUs (rocket), which does runtime-pm including disabling and enabling a rk8602 as needed. When reenabling the regulator while running a load, fatal hangs could be observed while enabling the associated power-domain, which the regulator supplies. Experimentally setting the regulator to always-on, made the issue disappear, leading to the missing delay to let power stabilize. And as expected, setting the enable-time to a non-zero value according to the datasheet also resolved the regulator-issue. The datasheets in nearly all cases only specify "typical" values, except for the fan53555 type 08. There both a typical and maximum value are listed - 40uS apart. For all typical values I've added 100uS to be on the safe side. Individual details for the relevant regulators below: - fan53526: The datasheet for all variants lists a typical value of 150uS, so make that 250uS with safety margin. - fan53555: types 08 and 18 (unsupported) are given a typical enable time of 135uS but also a maximum of 175uS so use that value. All the other types only have a typical time in the datasheet of 300uS, so give a bit margin by setting it to 400uS. - rk8600 + rk8602: Datasheet reports a typical value of 260us, so use 360uS to be safe. - syr82x + syr83x: All datasheets report typical soft-start values of 300uS for these regulators, so use 400uS. - tcs452x: Datasheet sadly does not report a soft-start time, so I've not set an enable-time Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patch.msgid.link/20250606190418.478633-1-heiko@sntech.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-10regulator: gpio: Fix the out-of-bounds access to drvdata::gpiodsManivannan Sadhasivam1-4/+4
commit c9764fd88bc744592b0604ccb6b6fc1a5f76b4e3 upstream. drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But the memory is allocated for only one pointer. This will lead to out-of-bounds access later in the code if 'config::ngpios' is > 1. So fix the code to allocate enough memory to hold 'config::ngpios' of GPIO descriptors. While at it, also move the check for memory allocation failure to be below the allocation to make it more readable. Cc: stable@vger.kernel.org # 5.0 Fixes: d6cd33ad7102 ("regulator: gpio: Convert to use descriptors") Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20250703103549.16558-1-mani@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27regulator: max14577: Add error check for max14577_read_reg()Wentao Liang1-1/+4
commit 65271f868cb1dca709ff69e45939bbef8d6d0b70 upstream. The function max14577_reg_get_current_limit() calls the function max14577_read_reg(), but does not check its return value. A proper implementation can be found in max14577_get_online(). Add a error check for the max14577_read_reg() and return error code if the function fails. Fixes: b0902bbeb768 ("regulator: max14577: Add regulator driver for Maxim 14577") Cc: stable@vger.kernel.org # v3.14 Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Link: https://patch.msgid.link/20250526025627.407-1-vulab@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27regulator: max20086: Change enable gpio to optionalJoão Paulo Gonçalves1-1/+1
commit e8ac7336dd62f0443a675ed80b17f0f0e6846e20 upstream. The enable pin can be configured as always enabled by the hardware. Make the enable gpio request optional so the driver doesn't fail to probe when `enable-gpios` property is not present in the device tree. Cc: stable@vger.kernel.org Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver") Signed-off-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com> Link: https://patch.msgid.link/20250420-fix-max20086-v1-2-8cc9ee0d5a08@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27regulator: max20086: Fix MAX200086 chip idJoão Paulo Gonçalves1-1/+1
commit 71406b6d1155d883c80c1b4405939a52f723aa05 upstream. >From MAX20086-MAX20089 datasheet, the id for a MAX20086 is 0x30 and not 0x40. With the current code, the driver will fail on probe when the driver tries to identify the chip id from a MAX20086 device over I2C. Cc: stable@vger.kernel.org Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver") Signed-off-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com> Link: https://patch.msgid.link/20250420-fix-max20086-v1-1-8cc9ee0d5a08@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19regulator: max20086: Fix refcount leak in max20086_parse_regulators_dt()Dan Carpenter1-3/+3
[ Upstream commit 06118ae36855b7d3d22688298e74a766ccf0cb7a ] There is a missing call to of_node_put() if devm_kcalloc() fails. Fix this by changing the code to use cleanup.h magic to drop the refcount. Fixes: 6b0cd72757c6 ("regulator: max20086: fix invalid memory access") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/aDVRLqgJWMxYU03G@stanley.mountain Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04regulator: ad5398: Add device tree supportIsaac Scott1-3/+9
[ Upstream commit 5a6a461079decea452fdcae955bccecf92e07e97 ] Previously, the ad5398 driver used only platform_data, which is deprecated in favour of device tree. This caused the AD5398 to fail to probe as it could not load its init_data. If the AD5398 has a device tree node, pull the init_data from there using of_get_regulator_init_data. Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Link: https://patch.msgid.link/20250128173143.959600-4-isaac.scott@ideasonboard.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-22regulator: max20086: fix invalid memory accessCosmin Tanislav1-1/+6
[ Upstream commit 6b0cd72757c69bc2d45da42b41023e288d02e772 ] max20086_parse_regulators_dt() calls of_regulator_match() using an array of struct of_regulator_match allocated on the stack for the matches argument. of_regulator_match() calls devm_of_regulator_put_matches(), which calls devres_alloc() to allocate a struct devm_of_regulator_matches which will be de-allocated using devm_of_regulator_put_matches(). struct devm_of_regulator_matches is populated with the stack allocated matches array. If the device fails to probe, devm_of_regulator_put_matches() will be called and will try to call of_node_put() on that stack pointer, generating the following dmesg entries: max20086 6-0028: Failed to read DEVICE_ID reg: -121 kobject: '\xc0$\xa5\x03' (000000002cebcb7a): is not initialized, yet kobject_put() is being called. Followed by a stack trace matching the call flow described above. Switch to allocating the matches array using devm_kcalloc() to avoid accessing the stack pointer long after it's out of scope. This also has the advantage of allowing multiple max20086 to probe without overriding the data stored inside the global of_regulator_match. Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver") Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Link: https://patch.msgid.link/20250508064947.2567255-1-demonsingur@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02objtool, regulator: rk808: Remove potential undefined behavior in ↵Josh Poimboeuf1-2/+2
rk806_set_mode_dcdc() [ Upstream commit 29c578c848402a34e8c8e115bf66cb6008b77062 ] If 'ctr_bit' is negative, the shift counts become negative, causing a shift of bounds and undefined behavior. Presumably that's not possible in normal operation, but the code generation isn't optimal. And undefined behavior should be avoided regardless. Improve code generation and remove the undefined behavior by converting the signed variables to unsigned. Fixes the following warning with an UBSAN kernel: vmlinux.o: warning: objtool: rk806_set_mode_dcdc() falls through to next function rk806_get_mode_dcdc() vmlinux.o: warning: objtool: .text.rk806_set_mode_dcdc: unexpected end of section Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/2023abcddf3f524ba478d64339996f25dc4097d2.1742852847.git.jpoimboe@kernel.org Closes: https://lore.kernel.org/oe-kbuild-all/202503182350.52KeHGD4-lkp@intel.com/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-28regulator: check that dummy regulator has been probed before using itChristian Eggers1-1/+11
commit 2c7a50bec4958f1d1c84d19cde518d0e96a676fd upstream. Due to asynchronous driver probing there is a chance that the dummy regulator hasn't already been probed when first accessing it. Cc: stable@vger.kernel.org Signed-off-by: Christian Eggers <ceggers@arri.de> Link: https://patch.msgid.link/20250313103051.32430-3-ceggers@arri.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-28regulator: dummy: force synchronous probingChristian Eggers1-1/+1
commit 8619909b38eeebd3e60910158d7d68441fc954e9 upstream. Sometimes I get a NULL pointer dereference at boot time in kobject_get() with the following call stack: anatop_regulator_probe() devm_regulator_register() regulator_register() regulator_resolve_supply() kobject_get() By placing some extra BUG_ON() statements I could verify that this is raised because probing of the 'dummy' regulator driver is not completed ('dummy_regulator_rdev' is still NULL). In the JTAG debugger I can see that dummy_regulator_probe() and anatop_regulator_probe() can be run by different kernel threads (kworker/u4:*). I haven't further investigated whether this can be changed or if there are other possibilities to force synchronization between these two probe routines. On the other hand I don't expect much boot time penalty by probing the 'dummy' regulator synchronously. Cc: stable@vger.kernel.org Fixes: 259b93b21a9f ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14") Signed-off-by: Christian Eggers <ceggers@arri.de> Link: https://patch.msgid.link/20250311091803.31026-1-ceggers@arri.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-08regulator: core: Add missing newline characterAlexander Stein1-1/+1
[ Upstream commit 155c569fa4c3b340fbf8571a0e42dd415c025377 ] dev_err_probe() error messages need newline character. Fixes: 6eabfc018e8d ("regulator: core: Allow specifying an initial load w/ the bulk API") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://patch.msgid.link/20250122072019.1926093-1-alexander.stein@ew.tq-group.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08regulator: of: Implement the unwind path of of_regulator_match()Joe Hattori1-1/+13
[ Upstream commit dddca3b2fc676113c58b04aaefe84bfb958ac83e ] of_regulator_match() does not release the OF node reference in the error path, resulting in an OF node leak. Therefore, call of_node_put() on the obtained nodes before returning the EINVAL error. Since it is possible that some drivers call this function and do not exit on failure, such as s2mps11_pmic_driver, clear the init_data and of_node in the error path. This was reported by an experimental verification tool that I am developing. As I do not have access to actual devices nor the QEMU board configuration to test drivers that call this function, no runtime test was able to be performed. Fixes: 1c8fa58f4750 ("regulator: Add generic DT parsing for regulators") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Link: https://patch.msgid.link/20250104080453.2153592-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09regulator: rk808: Restrict DVS GPIOs to the RK808 variant onlyDragan Simic1-7/+8
[ Upstream commit 0d214f27c0e3d9694284c95bac1502c2d247355b ] The rk808-regulator driver supports multiple PMIC variants from the Rockckip RK80x and RK81x series, but the DVS GPIOs are supported on the RK808 variant only, according to the DT bindings [1][2][3][4][5][6] and the datasheets for the supported PMIC variants. [7][8][9][10][11][12] Thus, change the probe path so the "dvs-gpios" property is checked for and its value possibly used only when the handled PMIC variant is RK808. There's no point in doing that on the other PMIC variants, because they don't support the DVS GPIOs, and it goes against the DT bindings to allow a possible out- of-place "dvs-gpios" property to actually be handled in the driver. This eliminates the following messages, emitted when the "dvs-gpios" property isn't found in the DT, from the kernel log on boards that actually don't use the RK808 variant, which may have provided a source of confusion: rk808-regulator rk808-regulator.2.auto: there is no dvs0 gpio rk808-regulator rk808-regulator.2.auto: there is no dvs1 gpio Furthermore, demote these kernel messages to debug messages, because they are useful during the board bringup phase only. Emitting them afterwards, on the boards that use the RK808 variant, but actually don't use the DVS0/1 GPIOs, clutters the kernel log a bit, while they provide no value and may actually cause false impression that some PMIC-related issues are present. [1] Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml [2] Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml [3] Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml [4] Documentation/devicetree/bindings/mfd/rockchip,rk816.yaml [5] Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml [6] Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml [7] https://rockchip.fr/RK805%20datasheet%20V1.2.pdf [8] https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2401261533_Rockchip-RK806-1_C5156483.pdf [9] https://rockchip.fr/RK808%20datasheet%20V1.4.pdf [10] https://rockchip.fr/RK816%20datasheet%20V1.3.pdf [11] https://rockchip.fr/RK817%20datasheet%20V1.01.pdf [12] https://rockchip.fr/RK818%20datasheet%20V1.0.pdf Fixes: 11375293530b ("regulator: rk808: Add regulator driver for RK818") Reported-by: Diederik de Haas <didi.debian@cknow.org> Signed-off-by: Dragan Simic <dsimic@manjaro.org> Link: https://patch.msgid.link/9a415c59699e76fc7b88a2552520a4ca2538f44e.1728902488.git.dsimic@manjaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09regulator: rk808: Add apply_bit for BUCK3 on RK809Mikhail Rudenko1-0/+2
[ Upstream commit 5e53e4a66bc7430dd2d11c18a86410e3a38d2940 ] Currently, RK809's BUCK3 regulator is modelled in the driver as a configurable regulator with 0.5-2.4V voltage range. But the voltage setting is not actually applied, because when bit 6 of PMIC_POWER_CONFIG register is set to 0 (default), BUCK3 output voltage is determined by the external feedback resistor. Fix this, by setting bit 6 when voltage selection is set. Existing users which do not specify voltage constraints in their device trees will not be affected by this change, since no voltage setting is applied in those cases, and bit 6 is not enabled. Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com> Link: https://patch.msgid.link/20241017-rk809-dcdc3-v1-1-e3c3de92f39c@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-14regulator: rtq2208: Fix uninitialized use of regulator_configChiYuan Huang1-1/+1
[ Upstream commit 2feb023110843acce790e9089e72e9a9503d9fa5 ] Fix rtq2208 driver uninitialized use to cause kernel error. Fixes: 85a11f55621a ("regulator: rtq2208: Add Richtek RTQ2208 SubPMIC") Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://patch.msgid.link/00d691cfcc0eae9ce80a37b62e99851e8fdcffe2.1729829243.git.cy_huang@richtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-04regulator: Return actual error in of_regulator_bulk_get_all()Chen-Yu Tsai1-1/+1
[ Upstream commit 395a41a1d3e377462f3eea8a205ee72be8885ff6 ] If regulator_get() in of_regulator_bulk_get_all() returns an error, that error gets overridden and -EINVAL is always passed out. This masks probe deferral requests and likely won't work properly in all cases. Fix this by letting of_regulator_bulk_get_all() return the original error code. Fixes: 27b9ecc7a9ba ("regulator: Add of_regulator_bulk_get_all") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://patch.msgid.link/20240822072047.3097740-3-wenst@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-27regulator: bd71815: fix ramp valuesKalle Niemi1-1/+1
[ Upstream commit 4cac29b846f38d5f0654cdfff5c5bfc37305081c ] Ramp values are inverted. This caused wrong values written to register when ramp values were defined in device tree. Invert values in table to fix this. Signed-off-by: Kalle Niemi <kaleposti@gmail.com> Fixes: 1aad39001e85 ("regulator: Support ROHM BD71815 regulators") Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/ZmmJXtuVJU6RgQAH@latitude5580 Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-27regulator: core: Fix modpost error "regulator_get_regmap" undefinedBiju Das1-0/+1
[ Upstream commit 3f60497c658d2072714d097a177612d34b34aa3d ] Fix the modpost error "regulator_get_regmap" undefined by adding export symbol. Fixes: 04eca28cde52 ("regulator: Add helpers for low-level register access") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406110117.mk5UR3VZ-lkp@intel.com Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20240610195532.175942-1-biju.das.jz@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12regulator: tps6594-regulator: Correct multi-phase configurationNeha Malcom Francis1-8/+8
[ Upstream commit 74b38cd77d3eb63c6d0ad9cf2ae59812ae54d3ee ] According to the TPS6594 PMIC Manual (linked) 8.3.2.1.4 Multi-Phase BUCK Regulator Configurations section, the PMIC ignores all the other bucks' except the primary buck's regulator registers. This is BUCK1 for configurations BUCK12, BUCK123 and BUCK1234 while it is BUCK3 for BUCK34. Correct the registers mapped for these configurations accordingly. Fixes: f17ccc5deb4d ("regulator: tps6594-regulator: Add driver for TI TPS6594 regulators") Link: https://www.ti.com/lit/gpn/tps6594-q1 Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Link: https://msgid.link/r/20240521094758.2190331-1-n-francis@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12regulator: tps6287x: Force writing VSEL bitMatti Vaittinen1-0/+1
[ Upstream commit 1ace99d7c7c4c801c0660246f741ff846a9b8e3c ] The data-sheet for TPS6287x-Q1 https://www.ti.com/lit/ds/symlink/tps62873-q1.pdf states at chapter 9.3.6.1 Output Voltage Range: "Note that every change to the VRANGE[1:0] bits must be followed by a write to the VSET register, even if the value of the VSET[7:0] bits does not change." The current implementation of the driver uses the regulator_set_voltage_sel_pickable_regmap() helper which further uses regmap_update_bits() to write the VSET-register. The regmap_update_bits() will not access the hardware if the new register value is same as old. It is worth noting that this is true also when the register is marked volatile, which I can't say is wrong because 'read-mnodify-write'-cycle with a volatile register is in any case something user should carefully consider. The 'range_applied_by_vsel'-flag in regulator desc was added to force the vsel register upodates by using regmap_write_bits(). This variant will always unconditionally write the bits to the hardware. It is worth noting that the vsel is now forced to be written to the hardware, whether the range was changed or not. This may cause a performance drop if users are wrtiting same voltage value repeteadly. It would be possible to read the range register to determine if it was changed, but this would be a performance issue for users who don't use reg cache for vsel. Always write the VSET register to the hardware regardless the cache. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Fixes: 7b0518fbf2be ("regulator: Add support for TI TPS6287x regulators") Link: https://msgid.link/r/ZktD50C5twF1EuKu@fedora Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12regulator: pickable ranges: don't always cache vselMatti Vaittinen1-13/+30
[ Upstream commit f4f4276f985a5aac7b310a4ed040b47e275e7591 ] Some PMICs treat the vsel_reg same as apply-bit. Eg, when voltage range is changed, the new voltage setting is not taking effect until the vsel register is written. Add a flag 'range_applied_by_vsel' to the regulator desc to indicate this behaviour and to force the vsel value to be written to hardware if range was changed, even if the old selector was same as the new one. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://msgid.link/r/ZktCpcGZdgHWuN_L@fedora Signed-off-by: Mark Brown <broonie@kernel.org> Stable-dep-of: 1ace99d7c7c4 ("regulator: tps6287x: Force writing VSEL bit") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12regulator: bd71828: Don't overwrite runtime voltagesMatti Vaittinen1-56/+2
[ Upstream commit 0f9f7c63c415e287cd57b5c98be61eb320dedcfc ] Some of the regulators on the BD71828 have common voltage setting for RUN/SUSPEND/IDLE/LPSR states. The enable control can be set for each state though. The driver allows setting the voltage values for these states via device-tree. As a side effect, setting the voltages for SUSPEND/IDLE/LPSR will also change the RUN level voltage which is not desired and can break the system. The comment in code reflects this behaviour, but it is likely to not make people any happier. The right thing to do is to allow setting the enable/disable state at SUSPEND/IDLE/LPSR via device-tree, but to disallow setting state specific voltages for those regulators. BUCK1 is a bit different. It only shares the SUSPEND and LPSR state voltages. The former behaviour of allowing to silently overwrite the SUSPEND state voltage by LPSR state voltage is also changed here so that the SUSPEND voltage is prioritized over LPSR voltage. Prevent setting PMIC state specific voltages for regulators which do not support it. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Fixes: 522498f8cb8c ("regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators") Link: https://msgid.link/r/e1883ae1e3ae5668f1030455d4750923561f3d68.1715848512.git.mazziesaccount@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12pwm: Rename pwm_apply_state() to pwm_apply_might_sleep()Sean Young1-2/+2
[ Upstream commit c748a6d77c06a78651030e17da6beb278a1c9470 ] In order to introduce a pwm api which can be used from atomic context, we will need two functions for applying pwm changes: int pwm_apply_might_sleep(struct pwm *, struct pwm_state *); int pwm_apply_atomic(struct pwm *, struct pwm_state *); This commit just deals with renaming pwm_apply_state(), a following commit will introduce the pwm_apply_atomic() function. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Lee Jones <lee@kernel.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Stable-dep-of: 974afccd3794 ("leds: pwm: Disable PWM when going to suspend") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12regulator: vqmmc-ipq4019: fix module autoloadingKrzysztof Kozlowski1-0/+1
[ Upstream commit 68adb581a39ae63a0ed082c47f01fbbe515efa0e ] Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://msgid.link/r/20240410172615.255424-2-krzk@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12regulator: qcom-refgen: fix module autoloadingKrzysztof Kozlowski1-0/+1
[ Upstream commit ddd3f34c10002e41ed3cd89c9bd8f1d05a22506a ] Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://msgid.link/r/20240410172615.255424-1-krzk@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12regulator: irq_helpers: duplicate IRQ nameMatti Vaittinen1-0/+3
[ Upstream commit 7ab681ddedd4b6dd2b047c74af95221c5f827e1d ] The regulator IRQ helper requires caller to provide pointer to IRQ name which is kept in memory by caller. All other data passed to the helper in the regulator_irq_desc structure is copied. This can cause some confusion and unnecessary complexity. Make the regulator_irq_helper() to copy also the provided IRQ name information so caller can discard the name after the call to regulator_irq_helper() completes. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://msgid.link/r/ZhJMuUYwaZbBXFGP@drtxq0yyyyyyyyyyyyydy-3.rev.dnainternet.fi Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17regulator: core: fix debugfs creation regressionJohan Hovold1-11/+16
commit 2a4b49bb58123bad6ec0e07b02845f74c23d5e04 upstream. regulator_get() may sometimes be called more than once for the same consumer device, something which before commit dbe954d8f163 ("regulator: core: Avoid debugfs: Directory ... already present! error") resulted in errors being logged. A couple of recent commits broke the handling of such cases so that attributes are now erroneously created in the debugfs root directory the second time a regulator is requested and the log is filled with errors like: debugfs: File 'uA_load' in directory '/' already present! debugfs: File 'min_uV' in directory '/' already present! debugfs: File 'max_uV' in directory '/' already present! debugfs: File 'constraint_flags' in directory '/' already present! on any further calls. Fixes: 2715bb11cfff ("regulator: core: Fix more error checking for debugfs_create_dir()") Fixes: 08880713ceec ("regulator: core: Streamline debugfs operations") Cc: stable@vger.kernel.org Cc: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240509133304.8883-1-johan+linaro@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-17regulator: tps65132: Add of_match tableAndré Apitzsch1-0/+7
[ Upstream commit a469158eaf8f4b10263b417856d923dfa38ae96d ] Add of_match table for "ti,tps65132" compatible string. This fixes automatic driver loading when using device-tree, and if built as a module like major linux distributions do. Signed-off-by: André Apitzsch <git@apitzsch.eu> Link: https://msgid.link/r/20240325-of_tps65132-v1-1-86a5f7ef4ede@apitzsch.eu Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-08-07 21:46:21 +0300