summaryrefslogtreecommitdiff
path: root/drivers/regulator/s5m8767.c
AgeCommit message (Collapse)AuthorFilesLines
2012-07-31regulator: Fix an s5m8767 build failureSamuel Ortiz1-3/+3
Due to a merge conflict we are getting this: drivers/regulator/s5m8767.c: In function ‘s5m8767_pmic_probe’: drivers/regulator/s5m8767.c:575:2: error: implicit declaration of function ‘s5m_reg_write’ [-Werror=implicit-function-declaration] This is fixed by fully converting this driver to the new s5m API. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-30Merge tag 'mfd-3.6-1' of ↵Linus Torvalds1-36/+36
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD bits from Samuel Ortiz: "We have support for a few new drivers: - Samsung s2mps11 - Wolfson Microelectronics wm5102 and wm5110 - Marvell 88PM800 and 88PM805 - TI twl6041 We also have our regular driver improvements: - Device tree and IRQ domain support for STE AB8500 - Regmap and devm_* API conversion for TI tps6586x - Device tree support for Samsung max77686 - devm_* API conversion for STE AB3100 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910, tps65090, da9052 and twl-core." Fix up mostly trivial conflicts, with the exception of drivers/usb/host/ehci-omap.c in particular, which had some re-organization of the reset sequence (commit 1a49e2ac9651: "EHCI: centralize controller initialization") that clashed with commit 2761a6394516 ("mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues"). In particular, commit 2761a6394516 moved the usb_add_hcd() to the *middle* of the reset sequence, which clashes fairly badly with the reset sequence re-organization (although it could have been done inside the new omap_ehci_init() function). I left that part of commit 2761a6394516 just undone. * tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (110 commits) mfd: Ensure AB8500 platform data is passed through db8500-prcmu to MFD Core mfd: Arizone core should select MFD_CORE mfd: Fix arizona-irq.c build by selecting REGMAP_IRQ mfd: Add debug trace on entering and leaving arizone runtime suspend mfd: Correct tps65090 cell names mfd: Remove gpio support from tps6586x core driver ARM: tegra: defconfig: Enable tps6586x gpio gpio: tps6586x: Add gpio support through platform driver mfd: Cache tps6586x register through regmap mfd: Use regmap for tps6586x register access. mfd: Use devm managed resources for tps6586x input: Add onkey support for 88PM80X PMIC mfd: Add support for twl6041 mfd: Fix twl6040 revision information mfd: Matches should be NULL when populate anatop child devices input: ab8500-ponkey: Create AB8500 domain IRQ mapping mfd: Add missing out of memory check for pcf50633 Documentation: Describe the AB8500 Device Tree bindings mfd: Add tps65910 32-kHz-crystal-input init mfd: Drop modifying mc13xxx driver's id_table in probe ...
2012-07-16mfd: Modify samsung mfd headerSangbeom Kim1-2/+2
As Prefix of Samsung pmic changed from s5m to s2m, To make common mfd driver for s2m and s5m series, This patch rename header of Samsung mfd and modify mfd driver. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-16mfd: Modify samsung mfd driver for common apiSangbeom Kim1-39/+39
Previous naming rule of samsung pmic start with s5m prefix. But It is changed by s2m. To cover various samsung s2m and s5m series, This patch modify function and variable name for common usage. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-16mfd: Rename s5m file and directories to samsungSangbeom Kim1-2/+2
Previously, Samsung PMIC naming rule start with prefix of s5m. But Naming rule is changed. From now on, Prefix will be changed to s2m. So, To support pmic series of s5m and s2m, change mfd file and directory name. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-16regulator: s5m8767: Properly handle gpio_request failureAxel Lin1-25/+24
Convert to devm_gpio_request to save a few error handling code. This patch properly handle the gpio_request failure, we should return error when gpio_request fails rather than just show warning. I think one of the reason we got -EBUSY is because current code does not free gpios in s5m8767_pmic_remove(). So it got -EBUSY when reload the module. Yest another reason is in current code if gpio_request() returns error, the rest of the code still calls gpio_direction_output to config buck_gpios and buck_ds gpios. This looks wrong to me. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-26regulator: s5m8767: Convert to regulator_list_voltage_linearAxel Lin1-25/+21
In current code, .list_voltage and .set_voltage_sel callbacks for BUCK7 and BUCK8 return -EINVAL. This patch adds s5m8767_buck78_ops for BUCK7 and BUCK8 which does not set .list_voltage, .get_voltage_sel and .set_voltage_sel. ( This has the same effect of returning -EINVAL in the callbacks) Then for all the users of s5m8767_list_voltage, we don't need to worry about the case reg_voltage_map[reg_id] is NULL. So we can convert s5m8767_list_voltage to regulator_list_voltage_linear. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25regulator: Modify ramp_delay value for s5m8767aSangbeom Kim1-2/+6
As s5m8767a is revisioned, ramp_delay register is changed. 5mV/uS, 10mV/uS, 25mV/uS, 50mV/uS, 100mV/uS ramp delay can be selected. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25Merge tag 'v3.5-rc4' into regulator-driversMark Brown1-1/+1
Linux 3.5-rc4 contains patches which conflict with some of the development work.
2012-06-19regulator: s5m8767a: Support AP watchdog reset operationSangbeom Kim1-44/+93
The S5M8767A can't know status of ap reset. So, After AP watchdog reset, AP can't boot normally. Problem can be happened like below condition. - AP Bootable lowest voltage(vdd_arm): 0.9v - AP DVFS voltage table: 0.8v, 0.9v, 1.0v - During AP works on lowest voltage(0.8V), watchdog reset is asserted - AP can't boot, because vdd arm is still 0.8v Solution - Basic concept: After ap watchdog reset, GPIO configuration is changed by default value - S5M8767A has function of voltage control with gpio (8 levels with 3 gpios) - Set bootable voltage on level 0 -> can work with default gpio configuration - In the probing, Change voltage control level from level 0 to level 1 - Execute normal dvfs operation on level 1 - After watchdog reset, ap gpio is set by default value - PMIC operation mode is changed by ap reset (level1 -> level0) - Regardless of previous vdd_arm voltage, AP always can be booted. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-17regulator: Fix the s5m8767a problem of the division by nullSangbeom Kim1-1/+1
If ramp_delay is 0, delay value can be divided by zero. This patch can fix the problem. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-13regulator: Replace set_voltage with set_voltage_selSangbeom Kim1-24/+14
To apply delay time for voltage change, replace s5m8767_set_voltage with s5m8767_set_voltage_sel. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-13regulator: Remove s5m8767a buck initializationSangbeom Kim1-3/+0
As s5m8767a is revisioned, remove unnecessary buck 2,3,4 initialization routine. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-12regulator: Staticise non-exported symbol s5m8767_opmode_regMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-23regulator: Remove unneeded include of linux/delay.h from regulator driversAxel Lin1-1/+0
All the drivers that need delay for the regulator voltage output voltage to stabilize after being enabled or after being set to a new value has been converted to implement enable_time and set_voltage_time_sel callbacks. Then regulator core will take care of the necessary delay. For the drivers that don't need the delay, don't need to include linux/delay.h. This patch removes the unneeded include of linux/delay.h in regulator drivers. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-23regulator: s5m8767: Use DIV_ROUND_UP to calculate selectorAxel Lin1-1/+4
Integer division may truncate the result. Use DIV_ROUND_UP to ensure new voltage setting falls within specified range. Also properly handle the case min_vol < desc->min to ensure we don't return negative value for selector. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-10regulator: Replace regulator_desc_[ldo|buck] by s5m8767_regulator_desc macroAxel Lin1-48/+41
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-10regulator: Use one s5m8767_ops for both LDOs and BUCKsAxel Lin1-13/+3
All the callback function implementation are the same for both LDOs and BUCKs. Merge them to one s5m8767_ops. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-10regulator: Rework s5m8767_set_voltage to support both LDOs and BUCKsAxel Lin1-94/+49
s5m8767_set_voltage not only implement set_voltage callbacks for LDOs, but also for BUCKs when s5m8767->buck_gpioindex is not set. s5m8767_set_voltage_buck actually only for buck[2|3|4] when s5m8767->buck_gpioindex is set. Conditionally calling s5m8767_set_voltage in s5m8767_set_voltage_buck makes the code hard to read. I think merging s5m8767_set_voltage_buck and s5m8767_set_voltage actually simplifies things. It's easy to use buck234_vol pointer to differentiate if we need to control voltage for buck[2|3|4] by DVS GPIOs. This patch reworks s5m8767_set_voltage to support both LDOx and BUCKx in all cases. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-10Merge tag 'v3.4-rc2' into regulator-driversMark Brown1-7/+7
Linux 3.4-rc2 contains some fixes that further patches depend upon.
2012-04-09regulator: core: Use a struct to pass in regulator runtime configurationMark Brown1-2/+6
Rather than adding new arguments to regulator_register() every time we want to add a new bit of dynamic information at runtime change the function to take these via a struct. By doing this we avoid needing to do further changes like the recent addition of device tree support which required each regulator driver to be updated to take an additional parameter. The regulator_desc which should (mostly) be static data is still passed separately as most drivers are able to configure this statically at build time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01regulator: Add support s5m8767 opmode operationSangbeom Kim1-10/+61
S5M8767A has 4 operation mode for BUCK/LDOs. This patch can handle opmode for s5m8767a. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-31regulator: Fix setting new voltage in s5m8767_set_voltageAxel Lin1-7/+7
Current code does not really update the register with new value, fix it. I rename the variable i to sel for better readability. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-14regulator: Make s5m8767_get_voltage_register always return correct registerAxel Lin1-18/+9
Check s5m8767->buck[2|3|4]_gpiodvs status in s5m8767_get_voltage_register and return correct register accordingly. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-14regulator: s5m8767: Check pdata->buck[2|3|4]_gpiodvs earlierAxel Lin1-24/+21
If we need to ensure only one of the buck[2|3|4]_gpiodvs can be specificed, check them earlier. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-12regulator: Rename s5m8767_convert_voltage to s5m8767_convert_voltage_to_selAxel Lin1-12/+10
This function finds the smallest voltage that falls within the specified range, and then returns the selector. This rename makes the intention more clear. Also remove unneeded local variables min_vol and max_vol in s5m8767_set_voltage and s5m8767_set_voltage_buck. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-12regulator: Fix s5m8767_set_voltage_time_sel calculation valueSangbeom Kim1-1/+1
In the s5m8767_set_voltage_time_sel function, divisor unit is wrong. ramp_delay is usec unit. So 1000 should be multiplied. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-12regulator: Remove unused i2c variable in s5m8767_pmic_probeAxel Lin1-2/+0
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-12regulator: Fix the logic of s5m8767_set_voltage_time_selAxel Lin1-28/+2
This patch includes below fixes: 1. The mask variable is not used at all here, remove it. 2. We already have the new_sel and old_sel, simply returns the delay by: DIV_ROUND_UP(desc->step * (new_sel - old_sel), s5m8767->ramp_delay); Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-12regulator: s5m8767: Fix unused variable warning in probe()Mark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com>
2012-02-02regulator: Kill s5m8767_get_reg_id functionAxel Lin1-12/+7
Calling s5m8767_get_reg_id() is exactly the same as calling rdev_get_id(). It is pointless to add s5m8767_get_reg_id() function. Use rdev_get_id() directly and remove s5m8767_get_reg_id() function. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20regulator: Update s5m8767 for device tree API changesMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20regulator: s5m8767: Remove redundant MODULE_ALIASAxel Lin1-1/+0
The MODULE_DEVICE_TABLE will setup the modalias, thus adding a MODULE_ALIAS for an entry already in s5m8767_pmic_id is redundant. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20regulator: s5m8767: Add missing breaksAxel Lin1-0/+4
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20regulator: Add S5M8767A regulator driverSangbeom Kim1-0/+834
S5M8767A is a cost-effective PMIC which is designed for mobile applications. It includes high efficient 9 Buck converters, 28 LDOs. Especially, S5M8767A is optimized for Multi-core SOCs. And during DVFS operation, S5M8767A output stable voltage. This patch implement regulator driver for S5M8767A. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-24 06:03:08 +0300