| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit e1dccb485c2876ac1318f36ccc0155416c633a48 ]
pwrseq_power_on() calls pwrseq_unit_disable() when the
post_enable callback fails. However, this call is outside the
scoped_guard(mutex, &pwrseq->state_lock) block that ends.
pwrseq_unit_disable() has lockdep_assert_held(&pwrseq->state_lock),
which will fail when called from this error path.
Add the scoped_guard block to cover the post_enable callback and its
error handling to ensure the lock is held when pwrseq_unit_disable() is
called.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260130182651.1576579-1-n7l8m4@u.northwestern.edu
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c655f45480637aee326b5bd96488d35ab90db2b0 ]
On the Dell Latitude 7455, the firmware uses "LiP" with a lowercase 'i'
for the battery chemistry type, but only all-uppercase "LIP" was being
recognized. Add the CamelCase variant to the check to fix the "Unknown
battery technology" warning.
Fixes: 202ac22b8e2e ("power: supply: qcom_battmgr: Add lithium-polymer entry")
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260120235831.479038-1-val@packett.cool
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 23067259919663580c6f81801847cfc7bd54fd1f ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `extcon` handle, means that the
`extcon` handle will be deallocated/unregistered _before_ the interrupt
handler (since `devm_` naturally deallocates in reverse allocation
order). This means that during removal, there is a race condition where
an interrupt can fire just _after_ the `extcon` handle has been
freed, *but* just _before_ the corresponding unregistration of the IRQ
handler has run.
This will lead to the IRQ handler calling `extcon_set_state_sync()` with
a freed `extcon` handle. Which usually crashes the system or otherwise
silently corrupts the memory...
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `extcon` handle.
Fixes: f8d7a3d21160 ("power: supply: Add driver for pm8916 lbc")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://patch.msgid.link/e2a4cd2fcd42b6cd97d856c17c097289a2aed393.1769163273.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 39fe0eac6d755ef215026518985fcf8de9360e9e ]
In `probe()`, `request_irq()` is called before allocating/registering a
`power_supply` handle. If an interrupt is fired between the call to
`request_irq()` and `power_supply_register()`, the `power_supply` handle
will be used uninitialized in `power_supply_changed()` in
`wm97xx_bat_update()` (triggered from the interrupt handler). This will
lead to a `NULL` pointer dereference since
Fix this racy `NULL` pointer dereference by making sure the IRQ is
requested _after_ the registration of the `power_supply` handle. Since
the IRQ is the last thing requests in the `probe()` now, remove the
error path for freeing it. Instead add one for unregistering the
`power_supply` handle when IRQ request fails.
Fixes: 7c87942aef52 ("wm97xx_battery: Use irq to detect charger state")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/97b55f0479a932eea7213844bf66f28a974e27a2.1766270196.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 688364a11647dc09ba1e4429313e0008066ec790 ]
bq27xxx_write(), bq27xxx_read_block(), and bq27xxx_write_block()
return -EPERM when the bus callback pointer is NULL. A NULL callback
indicates the operation is not supported by the bus/driver,
not that permission is denied.
Return -EOPNOTSUPP instead of -EPERM when di->bus.write/
read_bulk/write_bulk is NULL.
Fixes: 14073f6614f6 ("power: supply: bq27xxx: Add bulk transfer bus methods")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Matt Ranostay <matt@ranostay.sg>
Link: https://patch.msgid.link/20251204083436.1367-1-vulab@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 36b05629226413836cfbb3fbe6689cd188bca156 ]
Some platforms expose reboot mode cells that are smaller than an
unsigned int, in which cases lead to write failures. Read the cell
first to determine actual size and only write the number of bytes the
cell can hold.
Fixes: 7a78a7f7695b ("power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface")
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Link: https://patch.msgid.link/20251214191529.2470580-1-akoskovich@pm.me
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8d59cf3887fbabacef53bfba473e33e8a8d9d07b ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. Keep the old behavior of
just printing a warning in case of any failures during the IRQ request
and finishing the probe successfully.
Fixes: d2cec82c2880 ("power: sbs-battery: Request threaded irq and fix dev callback cookie")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Phil Reid <preid@electromag.com.au>
Link: https://patch.msgid.link/0ef896e002495e615157b482d18a437af19ddcd0.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e2febe375e5ea5afed92f4cd9711bde8f24ee6d2 ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: e86d69dd786e ("power_supply: Add support for Richtek RT9455 battery charger")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/1567d831e04c3e2fcb9e18dd36b7bcba4634581a.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b7508129978ae1e2ed9b0410396abc05def9c4eb ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: f8d7a3d21160 ("power: supply: Add driver for pm8916 lbc")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://patch.msgid.link/64d8dd3675a4e59fa32c3e0ef451f12d1f7ed18f.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 62914959b35e9a1e29cc0f64cb8cfc5075a5366f ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: 098bce1838e0 ("power: supply: Add pm8916 VM-BMS support")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://patch.msgid.link/2749c09ff81fcac87ae48147e216135450d8c067.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b2ce982e2e0c888dc55c888ad0e20ea04daf2e6b ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: 84d7b7687489 ("power: Add battery driver for goldfish emulator")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/500a606bb6fb6f2bb8d797e19a00cea9dd7b03c1.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 642f33e34b969eedec334738fd5df95d2dc42742 ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: 874b2adbed12 ("power: supply: cpcap-battery: Add a battery driver")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/81db58d610c9a51a68184f856cd431a934cccee2.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5f0b1cb41906e86b64bf69f5ededb83b0d757c27 ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: 5069185fc18e ("power: supply: bq25980: Add support for the BQ259xx family")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/8763035cadb959e14787b3837f2d3db61f6e1c34.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8005843369723d9c8975b7c4202d1b85d6125302 ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: 32e4978bb920 ("power: supply: bq256xx: Introduce the BQ256XX charger driver")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/39da6da8cc060fa0382ca859f65071e791cb6119.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3291c51d4684d048dd2eb91b5b65fcfdaf72141f ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: a09209acd6a8 ("power: supply: act8945a_charger: Add status change update support")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/bcf3a23b5187df0bba54a8c8fe09f8b8a0031dee.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c4af8a98bb52825a5331ae1d0604c0ea6956ba4b ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Commit 1c1f13a006ed ("power: supply: ab8500: Move to componentized
binding") introduced this issue during a refactorization. Fix this racy
use-after-free by making sure the IRQ is requested _after_ the
registration of the `power_supply` handle.
Fixes: 1c1f13a006ed ("power: supply: ab8500: Move to componentized binding")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/ccf83a09942cb8dda3dff70b2682f2c2e9cb97f2.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bd44ea12919ac4e83c9f3997240fe58266aa8799 ]
Mirroring drivers/macintosh/apm_emu.c, this means that
modprobe apm_power && modprobe $anotherdriver && modprobe -r apm_power
leaves $anotherdriver's apm_get_power_status instead of deleting it.
Fixes: 3788ec932bfd ("[BATTERY] APM emulation driver for class batteries")
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Link: https://patch.msgid.link/xczpgox57hxbunkcbdl5fxhc4gnsajsipldfidi7355afezk64@tarta.nabijaczleweli.xyz
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ea14bae6df18942bccb467fcf5ff33ca677b8253 ]
Since wm831x_set_bits() may return error, log failure and exit from
wm831x_usb_limit_change() in such case.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 626b6cd5f52e ("power: wm831x_power: Support USB charger current limit management")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251009170553.566561-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
rt9467_set_value_from_ranges()
[ Upstream commit 15aca30cc6c69806054b896a2ccf7577239cb878 ]
There is a typo in rt9467_set_value_from_ranges() that can cause leaving local
variable sel with an undefined value which is then used in regmap_field_write().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 6f7f70e3a8dd ("power: supply: rt9467: Add Richtek RT9467 charger driver")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20251009145308.1830893-1-m.masimov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b27fe2d8d2380118c343629175385ff587e2fe4 ]
The return value of rt9467_set_value_from_ranges() when setting AICL VTH is
not checked, even though it may fail.
Log error and return from rt9467_run_aicl() on fail.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 6f7f70e3a8dd ("power: supply: rt9467: Add Richtek RT9467 charger driver")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251009144725.562278-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2c68ac48c52ad146523f32b01d70009622bf81aa ]
Since iio_read_channel_processed() may fail, return its exit code on error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 814755c48f8b ("power: max17040: get thermal data from adc if available")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251008133648.559286-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 92ec7e7b86ec0aff9cd7db64d9dce50a0ea7c542 ]
Since devm_delayed_work_autocancel() may fail, add return code check and
exit cw_bat_probe() on error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0cb172a4918e ("power: supply: cw2015: Use device managed API to simplify the code")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251008120711.556021-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6cdc4d488c2f3a61174bfba4e8cc4ac92c219258 ]
The device node pointers `np_conn` and `np_edev`, obtained from
of_parse_phandle() and of_get_parent() respectively, are not released.
This results in a reference count leak.
Add of_node_put() calls after the last use of these device nodes to
properly release their references and fix the leaks.
Fixes: 8242336dc8a8 ("power: supply: rt5033_charger: Add cable detection and USB OTG supply")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250929113234.1726-1-vulab@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 41307ec7df057239aae3d0f089cc35a0d735cdf8 ]
The X1E80100 battery management firmware sends a notification with
code 0x83 when the battery charging state changes, such as switching
between fast charge, taper charge, end of charge, or any other error
charging states.
The same notification code is used with bit[8] set when charging stops
because the charge control end threshold is reached. Additionally,
a 2-bit value is included in bit[10:9] with the same code to indicate
the charging source capability, which is determined by the calculated
power from voltage and current readings from PDOs: 2 means a strong
charger over 60W, 1 indicates a weak charger, and 0 means there is no
charging source.
These 3-MSB [10:8] in the notification code is not much useful for now,
hence just ignore them and trigger a power supply change event whenever
0x83 notification code is received. This helps to eliminate the unknown
notification error messages.
Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Closes: https://lore.kernel.org/all/r65idyc4of5obo6untebw4iqfj2zteiggnnzabrqtlcinvtddx@xc4aig5abesu/
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3ec600210849cf122606e24caab85f0b936cf63c ]
If we have 2 instances of sbs-charger in the DTS, the driver probe for the second instance will fail:
[ 8.012874] sbs-battery 18-000b: sbs-battery: battery gas gauge device registered
[ 8.039094] sbs-charger 18-0009: ltc4100: smart charger device registered
[ 8.112911] sbs-battery 20-000b: sbs-battery: battery gas gauge device registered
[ 8.134533] sysfs: cannot create duplicate filename '/class/power_supply/sbs-charger'
[ 8.143871] CPU: 3 PID: 295 Comm: systemd-udevd Tainted: G O 5.10.147 #22
[ 8.151974] Hardware name: ALE AMB (DT)
[ 8.155828] Call trace:
[ 8.158292] dump_backtrace+0x0/0x1d4
[ 8.161960] show_stack+0x18/0x6c
[ 8.165280] dump_stack+0xcc/0x128
[ 8.168687] sysfs_warn_dup+0x60/0x7c
[ 8.172353] sysfs_do_create_link_sd+0xf0/0x100
[ 8.176886] sysfs_create_link+0x20/0x40
[ 8.180816] device_add+0x270/0x7a4
[ 8.184311] __power_supply_register+0x304/0x560
[ 8.188930] devm_power_supply_register+0x54/0xa0
[ 8.193644] sbs_probe+0xc0/0x214 [sbs_charger]
[ 8.198183] i2c_device_probe+0x2dc/0x2f4
[ 8.202196] really_probe+0xf0/0x510
[ 8.205774] driver_probe_device+0xfc/0x160
[ 8.209960] device_driver_attach+0xc0/0xcc
[ 8.214146] __driver_attach+0xc0/0x170
[ 8.218002] bus_for_each_dev+0x74/0xd4
[ 8.221862] driver_attach+0x24/0x30
[ 8.225444] bus_add_driver+0x148/0x250
[ 8.229283] driver_register+0x78/0x130
[ 8.233140] i2c_register_driver+0x4c/0xe0
[ 8.237250] sbs_driver_init+0x20/0x1000 [sbs_charger]
[ 8.242424] do_one_initcall+0x50/0x1b0
[ 8.242434] do_init_module+0x44/0x230
[ 8.242438] load_module+0x2200/0x27c0
[ 8.242442] __do_sys_finit_module+0xa8/0x11c
[ 8.242447] __arm64_sys_finit_module+0x20/0x30
[ 8.242457] el0_svc_common.constprop.0+0x64/0x154
[ 8.242464] do_el0_svc+0x24/0x8c
[ 8.242474] el0_svc+0x10/0x20
[ 8.242481] el0_sync_handler+0x108/0x114
[ 8.242485] el0_sync+0x180/0x1c0
[ 8.243847] sbs-charger 20-0009: Failed to register power supply
[ 8.287934] sbs-charger: probe of 20-0009 failed with error -17
This is mainly because the "name" field of power_supply_desc is a constant.
This patch fixes the issue by reusing the same approach as sbs-battery.
With this patch, the result is:
[ 7.819532] sbs-charger 18-0009: ltc4100: smart charger device registered
[ 7.825305] sbs-battery 18-000b: sbs-battery: battery gas gauge device registered
[ 7.887423] sbs-battery 20-000b: sbs-battery: battery gas gauge device registered
[ 7.893501] sbs-charger 20-0009: ltc4100: smart charger device registered
Signed-off-by: Fabien Proriol <fabien.proriol@viavisolutions.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fee0904441325d83e7578ca457ec65a9d3f21264 ]
The ASUS S15 xElite model report the Li-ion battery with an OOI, hence this
update the detection and return the appropriate type.
Signed-off-by: Christopher Ruehl <chris.ruehl@gtsys.com.hk>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ee6cd8f3e28ee5a929c3b67c01a350f550f9b73a upstream.
CHARGE_CONTROL_LIMIT is a wrong property to report charge current limit,
because `CHARGE_*` attributes represents capacity, not current. The
correct attribute to report and set charge current limit is
CONSTANT_CHARGE_CURRENT.
Rename CHARGE_CONTROL_LIMIT to CONSTANT_CHARGE_CURRENT.
Cc: stable@vger.kernel.org
Fixes: 715ecbc10d6a ("power: supply: max77976: add Maxim MAX77976 charger driver")
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit def5612170a8c6c4c6a3ea5bd6c3cfc8de6ba4b1 ]
Fix the checkpatch warning:
CHECK: Alignment should match open parenthesis
Fixes: 0cb172a4918e ("power: supply: cw2015: Use device managed API to simplify the code")
Signed-off-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1e451977e1703b6db072719b37cd1b8e250b9cc9 upstream.
There are fuel gauges in the bq27xxx series (e.g. bq27z561) which may in some
cases report 0xff as the value of BQ27XXX_REG_FLAGS that should not be
interpreted as "no battery" like for a disconnected battery with some built
in bq27000 chip.
So restrict the no-battery detection originally introduced by
commit 3dd843e1c26a ("bq27000: report missing device better.")
to the bq27000.
There is no need to backport further because this was hidden before
commit f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
Fixes: f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
Suggested-by: Jerry Lv <Jerry.Lv@axis.com>
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/dd979fa6855fd051ee5117016c58daaa05966e24.1755945297.git.hns@goldelico.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2c334d038466ac509468fbe06905a32d202117db upstream.
Since commit
commit f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
the console log of some devices with hdq enabled but no bq27000 battery
(like e.g. the Pandaboard) is flooded with messages like:
[ 34.247833] power_supply bq27000-battery: driver failed to report 'status' property: -1
as soon as user-space is finding a /sys entry and trying to read the
"status" property.
It turns out that the offending commit changes the logic to now return the
value of cache.flags if it is <0. This is likely under the assumption that
it is an error number. In normal errors from bq27xxx_read() this is indeed
the case.
But there is special code to detect if no bq27000 is installed or accessible
through hdq/1wire and wants to report this. In that case, the cache.flags
are set historically by
commit 3dd843e1c26a ("bq27000: report missing device better.")
to constant -1 which did make reading properties return -ENODEV. So everything
appeared to be fine before the return value was passed upwards.
Now the -1 is returned as -EPERM instead of -ENODEV, triggering the error
condition in power_supply_format_property() which then floods the console log.
So we change the detection of missing bq27000 battery to simply set
cache.flags = -ENODEV
instead of -1.
Fixes: f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
Cc: Jerry Lv <Jerry.Lv@axis.com>
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/692f79eb6fd541adb397038ea6e750d4de2deddf.1755945297.git.hns@goldelico.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 202ac22b8e2e015e6c196fd8113f3d2a62dd1afc ]
On some Dell XPS 13 (9345) variants, the battery used is lithium-polymer
based. Currently, this is reported as unknown technology due to the entry
missing.
[ 4083.135325] Unknown battery technology 'LIP'
Add another check for lithium-polymer in the technology parsing callback
and return that instead of unknown.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250523-psy-qcom-battmgr-add-lipo-entry-v1-1-938c20a43a25@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2937f5d2e24eefef8cb126244caec7fe3307f724 ]
When the kernel is not configured CONFIG_OF, the max14577_charger_dt_init
function returns NULL. Fix the max14577_charger_probe functionby returning
-ENODATA instead of potentially passing a NULL pointer to PTR_ERR.
This fixes the below smatch warning:
max14577_charger_probe() warn: passing zero to 'PTR_ERR'
Fixes: e30110e9c96f ("charger: max14577: Configure battery-dependent settings from DTS and sysfs")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250519061601.8755-1-hanchunchao@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d9fa3aae08f99493e67fb79413c0e95d30fca5e9 ]
In the cpcap_usb_detect() function, the power_supply_get_by_name()
function may return `NULL` instead of an error pointer.
To prevent potential null pointer dereferences, Added a null check.
Fixes: eab4e6d953c1 ("power: supply: cpcap-charger: get the battery inserted infomation from cpcap-battery")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20250519024741.5846-1-hanchunchao@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d055f51731744243b244aafb1720f793a5b61f7b ]
IIO thermal channel is in millidegree while power supply framework expects
decidegree values. Adjust scaling to get correct readings.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250430060239.12085-2-clamor95@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f16d9fb6cf03fdbdefa41a8b32ba1e57afb7ae3d ]
Multiple applications may access the battery gauge at the same time, so
the gauge may be busy and EBUSY will be returned. The driver will set a
flag to record the EBUSY state, and this flag will be kept until the next
periodic update. When this flag is set, bq27xxx_battery_get_property()
will just return ENODEV until the flag is updated.
Even if the gauge was busy during the last accessing attempt, returning
ENODEV is not ideal, and can cause confusion in the applications layer.
Instead, retry accessing the I2C to update the flag is as expected, for
the gauge typically recovers from busy state within a few milliseconds.
If still failed to access the gauge, the real error code would be returned
instead of ENODEV (as suggested by Pali Rohár).
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jerry Lv <Jerry.Lv@axis.com>
Link: https://lore.kernel.org/r/20250415-foo-fix-v2-1-5b45a395e4cc@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c73d19f89cb03c43abbbfa3b9caa1b8fc719764c ]
Device can be unbound, so driver must also release memory for the wakeup
source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250406202730.55096-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 62d48983f215bf1dd48665913318101fa3414dcf ]
This patch adds a small optimization to the low-level at91_reset()
function, which includes:
- Removes the extra branch, since the following store operations
already have proper condition checks.
- Removes the definition of the clobber register r4, since it is
no longer used in the code.
Fixes: fcd0532fac2a ("power: reset: at91-reset: make at91sam9g45_restart() generic")
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20250307053809.20245-1-eagle.alexander923@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bbcfe510ecd47f2db4c8653c7dfa9dc7a55b1583 ]
Allow a boolean property of "x-powers,no-thermistor" to specify devices
where the ts pin is not connected to anything. This works around an
issue found with some devices where the efuse is not programmed
correctly from the factory or when the register gets set erroneously.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://lore.kernel.org/r/20250204155835.161973-4-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 30cc7b0d0e9341d419eb7da15fb5c22406dbe499 ]
The charge input threshold voltage register on the MAX77693 PMIC accepts
four values: 0x0 for 4.3v, 0x1 for 4.7v, 0x2 for 4.8v and 0x3 for 4.9v.
Due to an oversight, the driver calculated the values for 4.7v and above
starting from 0x0, rather than from 0x1 ([(4700000 - 4700000) / 100000]
gives 0).
Add 1 to the calculation to ensure that 4.7v is converted to a register
value of 0x1 and that the other two voltages are converted correctly as
well.
Fixes: 87c2d9067893 ("power: max77693: Add charger driver for Maxim 77693")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250316-max77693-charger-input-threshold-fix-v1-1-2b037d0ac722@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45291874a762dbb12a619dc2efaf84598859007a ]
Commit 243f8ffc883a1 ("power: supply: bq27xxx_battery: Notify also about
status changes") intended to notify userspace when the status changes,
based on the flags register. However, the cached state is updated too
early, before the flags are tested for any changes. Remove the premature
update.
Fixes: 243f8ffc883a1 ("power: supply: bq27xxx_battery: Notify also about status changes")
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Link: https://lore.kernel.org/r/20241125152945.47937-1-absicsz@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 98380110bd48fbfd6a798ee11fffff893d36062c ]
Correct the fault handling for the AXP717 by changing the i2c write
from regmap_update_bits() to regmap_write_bits(). The update bits
function does not work properly on a RW1C register where we must
write a 1 back to an existing register to clear it.
Additionally, as part of this testing I confirmed the behavior of
errors reappearing, so remove comment about assumptions.
Fixes: 6625767049c2 ("power: supply: axp20x_battery: add support for AXP717")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250131231455.153447-2-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3fb3cb4350befc4f901c54e0cb4a2a47b1302e08 ]
Size of variable sd_gain equals four bytes - DA9150_QIF_SD_GAIN_SIZE.
Size of variable shunt_val equals two bytes - DA9150_QIF_SHUNT_VAL_SIZE.
The expression sd_gain * shunt_val is currently being evaluated using
32-bit arithmetic. So during the multiplication an overflow may occur.
As the value of type 'u64' is used as storage for the eventual result, put
ULL variable at the first position of each expression in order to give the
compiler complete information about the proper arithmetic to use. According
to C99 the guaranteed width for a variable of type 'unsigned long long' >=
64 bits.
Remove the explicit cast to u64 as it is meaningless.
Just for the sake of consistency, perform the similar trick with another
expression concerning 'iavg'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a419b4fd9138 ("power: Add support for DA9150 Fuel-Gauge")
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://lore.kernel.org/r/20250130090030.53422-1-a.vatoropin@crpt.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit afc6e39e824ad0e44b2af50a97885caec8d213d1 upstream.
Fix set charge current limits for devices which allow to set the lowest
charge current limit to be greater zero. If requested charge current limit
is below lowest limit, the index equals current_limit_map_size which leads
to accessing memory beyond allocated memory.
Fixes: be2919d8355e ("power: supply: gpio-charger: add charge-current-limit feature")
Cc: stable@vger.kernel.org
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://lore.kernel.org/r/20241209-fix-charge-current-limit-v1-1-760d9b8f2af3@liebherr.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c28dc9fc24f5fa802d44ef7620a511035bdd803e upstream.
ECs implementing the v2 command will not stop charging when the end
threshold is reached. Instead they will begin discharging until the
start threshold is reached, leading to permanent charge and discharge
cycles. This defeats the point of the charge control mechanism.
Avoid the issue by hiding the start threshold on v2 systems.
Instead on those systems program the EC with start == end which forces
the EC to reach and stay at that level.
v1 does not support thresholds and v3 works correctly,
at least judging from the code.
Reported-by: Thomas Koch <linrunner@gmx.net>
Fixes: c6ed48ef5259 ("power: supply: add ChromeOS EC based charge control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241208-cros_charge-control-v2-v1-3-8d168d0f08a3@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e65a1b7fad0e112573eea7d64d4ab4fc513b8695 upstream.
Allow setting the start and stop thresholds to the same value.
There is no reason to disallow it.
Suggested-by: Thomas Koch <linrunner@gmx.net>
Fixes: c6ed48ef5259 ("power: supply: add ChromeOS EC based charge control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241208-cros_charge-control-v2-v1-2-8d168d0f08a3@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e5f84d1cf562f7b45e28d6e5f6490626f870f81c upstream.
Concurrent accesses through sysfs may lead to inconsistent state in the
priv data. Introduce a mutex to avoid this.
Fixes: c6ed48ef5259 ("power: supply: add ChromeOS EC based charge control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241208-cros_charge-control-v2-v1-1-8d168d0f08a3@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b3ded6072c5600704cfa3ce3a8dc8718d34bda66 ]
There are 2 issues with bq24296_set_otg_vbus():
1. When writing the OTG_CONFIG bit it uses POC_CHG_CONFIG_SHIFT which
should be POC_OTG_CONFIG_SHIFT.
2. When turning the regulator off it never turns charging back on. Note
this must be done through bq24190_charger_set_charge_type(), to ensure
that the charge_type property value of none/trickle/fast is honored.
Resolve both issues to fix BQ24296 Vbus regulator support not working.
Fixes: b150a703b56f ("power: supply: bq24190_charger: Add support for BQ24296")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241116203648.169100-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b6d445f6724deda3fd87fa33358009d947a64c5d ]
This fails to link when compile-testing and the auxiliary bus is not built-in:
x86_64-linux-ld: drivers/power/reset/ep93xx-restart.o: in function `ep93xx_reboot_driver_init':
ep93xx-restart.c:(.init.text+0x11): undefined reference to `__auxiliary_driver_register'
x86_64-linux-ld: drivers/power/reset/ep93xx-restart.o: in function `ep93xx_reboot_driver_exit':
ep93xx-restart.c:(.exit.text+0x8): undefined reference to `auxiliary_driver_unregister'
Add the appropriate dependency.
Fixes: 9fa7cdb4368f ("power: reset: Add a driver for the ep93xx reset")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241111104418.3891756-1-arnd@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c46a9ee5c6210682611d3d4276436c23a95e1996 ]
Use IC status regfield to rewrite the 'get_staus' function. The original
one cannot cover some special scenario like as charger OTG or JEITA case.
Fixes: 4a1a5f6781d8 ("power: supply: rt9471: Add Richtek RT9471 charger driver")
Reported-by: Lucas Tsai <lucas_tsai@richtek.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/67ba92bb4a9c51d9cafadab30b788a3a2c3048e1.1727252762.git.cy_huang@richtek.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d10ff07dd2b933e3864c592ca932996b07bbf22a ]
Fix F_WDT and F_WDT_RST wrong regfield declaration.
Fixes: 4a1a5f6781d8 ("power: supply: rt9471: Add Richtek RT9471 charger driver")
Reported-by: Lucas Tsai <lucas_tsai@richtek.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/f862e23f220612f01fabb6d8e76cfaf63756c22b.1727252762.git.cy_huang@richtek.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
