summaryrefslogtreecommitdiff
path: root/drivers/power
AgeCommit message (Collapse)AuthorFilesLines
2011-11-26ds2760_battery: Add rated capacity of the hx4700 3600mAh batteryPaul Parsons1-1/+5
Add rated capacity of the HP iPAQ hx4700 3.7V 3600mAh (359114-001) battery. For this battery the value of the rated capacity EEPROM register at 0x32 is 14; thus rated_capacities[14] = 3600. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-26power_supply: Remove IRQF_DISABLEDYong Zhang2-2/+2
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-26bq27x00_battery: Fix OOPS caused by unregistring bq27x00 driverPali Rohár1-0/+8
* power_supply_unregister call bq27x00_battery_get_property which call bq27x00_battery_poll * make sure that bq27x00_battery_poll will not call schedule_delayed_work again after unregister (which cause OOPS) Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-26bq27x00_battery: Fix reporting error messagesPali Rohár1-7/+14
* Do not be noise if battery is not calibrated (use dev_dbg) Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-25bq27x00_battery: Fix reporting status value for bq27500 batteryPali Rohár1-4/+9
Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-25bq27x00_battery: Cache temperature value in converted unitPali Rohár1-21/+24
Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-25bq27x00_battery: Cache energy propertyPali Rohár1-27/+26
Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-25bq27x00_battery: Report -ENODATA if bq27000 battery was not calibratedPali Rohár1-5/+14
* CI (Capacity Inaccurate) flag is set after full reset on bq27000 battery * when is set, all capacity properties should be reported incorrectly, because there was no learning cycle and battery was not calibrated * instead reporting incorrect values, report -ENODATA Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-25bq27x00_battery: Add support for property POWER_SUPPLY_PROP_CAPACITY_LEVELPali Rohár1-1/+39
Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-25bq27x00_battery: Do not cache current_now value for bq27000 bateryPali Rohár1-14/+5
* This prevent reporting old current_now value for bq27000 * Also ask for current flags, to make sure that current_now will be reported with correct signature Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-25max8925_power: Enable power change notificationsPhilip Rakity1-0/+5
The power core infrastructure allow external power change events to be passed to drivers what are listed in the supplied_to call back field. Enable this feature by allowing the supplied_to field to be passed to the driver. This feature will enable drivers named in the supplied_to field that have a external_power_changed callback to be notified when power was been turned on or off. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-25max8925_power: Remove support for irq bits that do not existPhilip Rakity1-13/+0
The max8925 cannot return usb status.  The bits       [MAX8925_IRQ_VCHG_USB_OVP] = {               .reg            = MAX8925_CHG_IRQ1,               .mask_reg       = MAX8925_CHG_IRQ1_MASK,               .offs           = 1 << 3,       },       [MAX8925_IRQ_VCHG_USB_F] =  {               .reg            = MAX8925_CHG_IRQ1,               .mask_reg       = MAX8925_CHG_IRQ1_MASK,               .offs           = 1 << 4,       },       [MAX8925_IRQ_VCHG_USB_R] = {               .reg            = MAX8925_CHG_IRQ1,               .mask_reg       = MAX8925_CHG_IRQ1_MASK,               .offs           = 1 << 5,       }, do not exist in the irq register. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-25max8925_power: Do not detect ac insert if handled by other codePhilip Rakity1-2/+6
On brownstone rev 4 ac-insert detect is handled by vbus. allow the platform code to configure the disabling of insert by setting no_insert_detect. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-25max8925_power: No temperature interrupts if temperature not connectedPhilip Rakity1-4/+8
Brownstone does not have temperature reading circuit hooked up. This leads to spurious interrupts. Allow the platform layer to indicate no temperature circuit and do not activate interrupts if no temperature control is set Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-25max8925_power: Fix incorrect voltage and current calculationPhilip Rakity1-7/+6
The datasheet indicates a 12 bit value is returned for i2c registers for voltage and current. Code was assuming 8 bits. But default for chip is 12 bit return value. Voltage is returned in 2mV units -- adjust to return as uV per linux power spec Adjust current calculation to return units in uA. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-25max8997_charger: Fix unsigned value for less than zeroJonghwan Choi1-1/+1
The 'val' is a 'unsigned char', so it is never less than zero. Signed-off-by: Jonghwan Choi <jhbird.choi@gmail.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-24intel_mid_battery: Handle Over Current gracefullyMajor Lee1-6/+6
When DCDC input line over current detecting, PMIC will change charging current automatically. Logging event is enough. Signed-off-by: Major Lee <major_lee@wistron.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-24tosa_battery: Convert to gpio_request_array() / gpio_free_array()Axel Lin1-47/+19
This change simplifies the implementation. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-24collie_battery: Convert to gpio_request_array() / gpio_free_array()Axel Lin1-40/+13
As suggested by Igor Grinberg, this change make the implementation looks simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-24olpc_battery: Remove unneeded 'olpc_battery_trigger_uevent'Anton Vorontsov1-8/+0
It is no longer used, so we can safely remove it. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-24olpc_battery: Fix section mismatch noiseAnton Vorontsov1-3/+3
This patch fixes the following noise (by renaming _drv to _driver): WARNING: drivers/power/olpc_battery.o(.data+0x100): Section mismatch in reference from the variable olpc_battery_drv to the function .devinit.text:olpc_battery_probe() The variable olpc_battery_drv references the function __devinit olpc_battery_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console WARNING: drivers/power/olpc_battery.o(.data+0x104): Section mismatch in reference from the variable olpc_battery_drv to the function .devexit.text:olpc_battery_remove() The variable olpc_battery_drv references the function __devexit olpc_battery_remove() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console WARNING: drivers/power/olpc_battery.o(.data+0x128): Section mismatch in reference from the variable olpc_battery_drv to the variable .devinit.rodata:olpc_battery_ids The variable olpc_battery_drv references the variable __devinitconst olpc_battery_ids If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-24bq20z75: Devicetree init supportRhyland Klein1-0/+77
Adding support to generate platform data when kernel is configured through device tree. Also adding the binding for the TI bq20z75 fuel gadge and the bq20z75 driver. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-23power_supply: Fix sysfs format warningRandy Dunlap1-1/+1
Fix format warning: drivers/power/power_supply_sysfs.c:82: warning: format '%d' expects type 'int', but argument 4 has type 'ssize_t' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-23pda_power: Fix build error if !CONFIG_USB_OTG_UTILSAxel Lin1-0/+11
commit 9ad63986c606c60e2e916b1b96f22991f966d9cc "pda_power: Add support for using otg transceiver events" introduces below build error if !CONFIG_USB_OTG_UTILS. CC drivers/power/pda_power.o drivers/power/pda_power.c: In function 'pda_power_probe': drivers/power/pda_power.c:322: error: 'otg_is_usb_online' undeclared (first use in this function) drivers/power/pda_power.c:322: error: (Each undeclared identifier is reported only once drivers/power/pda_power.c:322: error: for each function it appears in.) drivers/power/pda_power.c:325: error: 'otg_is_ac_online' undeclared (first use in this function) drivers/power/pda_power.c:371: error: 'otg_handle_notification' undeclared (first use in this function) make[2]: *** [drivers/power/pda_power.o] Error 1 make[1]: *** [drivers/power] Error 2 make: *** [drivers] Error 2 This patch adds #ifdef CONFIG_USB_OTG_UTILS guards at necessary places to fix build errors. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19max17042_battery: Bugfix of incorrect voltage register value interpretationMyungJoo Ham1-4/+4
The calculation had error in getting voltage values from MAX17042 registers. The least bit denotes 78.125uV (625/8). Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19max17042_battery: Do not lose accuracy calculating current_nowPhilip Rakity1-2/+1
PROP_CURRENT_NOW value is first divided then multiplied up causing a lose of accuracy. Use the same method as PROP_CURRENT_AVG to do the calculation. Signed-off-by: Philip Rakity <prakity@marvell.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19max17042_battery: Divide by 0 crash because r_sns init too latePhilip Rakity1-3/+3
On MMP2 brownstone divide by 0 error since probe sets r_sns after calling power_supply_register. Move the code up a few lines. r_sns comes from the platform data. PROP_CURRENT_AVG and PROP_CURRENT divide the result by r_sns. Signed-off-by: Philip Rakity <prakity@marvell.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19max8998_charger: Allow full timeout not set, leave it unchangedAxel Lin1-0/+1
Add a missing break for case 0 of pdata->timeout, otherwise it will fall through to the default case and return error. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19olpc_battery: Add wakeup supportDaniel Drake1-0/+24
Battery and AC events can now be used to wake up the system from suspend. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19olpc_battery: Bind to device treeDaniel Drake1-21/+34
This is cleaner, and allows suspend/resume (wakeup) handlers to be added in an upcoming patch. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19wm831x_power: Only register WM831x battery charger if enabledMark Brown2-18/+30
Don't tell the system about the battery charger if it's not enabled, we can reasonably assume that if the charger is not enabled then no battery will ever be connected so reporting state is at best going to waste time and at worst going to cause confusing information in the UI. For simplicity and robustness we continue to register and handle interrupts from the charger. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19pda_power: Add support for using otg transceiver eventsDima Zavin1-12/+59
If the platform data sets the use_otg_notifier flag, the driver will now register an otg notifier callback and listen to transceiver events for AC/USB plug-in events instead. This would normally be used by not specifying is_xx_online callbacks and not specifying any irqs so the state machine is completely driven from OTG xceiver events. Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19ds2780_battery&z2_battery: Add __devexit_p at necessary placesAxel Lin2-2/+2
According to the comments in include/linux/init.h: "Pointers to __devexit functions must use __devexit_p(function_name), the wrapper will insert either the function_name or NULL, depending on the config options." Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Clifton Barnes <cabarnes@indesign-llc.com> Cc: Peter Edwards <sweetlilmre@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19max8903_charger: Add "platform:" prefix for platform modaliasAxel Lin1-1/+1
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS with "platform:"), the platform modalias is prefixed with "platform:". Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19max8997_charger&max8998_charger: Fix unterminated platform_device_id tablesAxel Lin2-0/+2
The platform_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19s3c-adc-battery: Fix compilation error due to missing header (module.h)Vasily Khoruzhick1-0/+1
Add linux/module.h to fix this compilation error: drivers/power/s3c_adc_battery.c:435:15: error: expected declaration specifiers or ‘...’ before string constant drivers/power/s3c_adc_battery.c:435:1: warning: data definition has no type or storage class drivers/power/s3c_adc_battery.c:435:1: warning: type defaults to ‘int’ in declaration of ‘MODULE_AUTHOR’ drivers/power/s3c_adc_battery.c:435:15: warning: function declaration isn’t a prototype drivers/power/s3c_adc_battery.c:436:20: error: expected declaration specifiers or ‘...’ before string constant drivers/power/s3c_adc_battery.c:436:1: warning: data definition has no type or storage class drivers/power/s3c_adc_battery.c:436:1: warning: type defaults to ‘int’ in declaration of ‘MODULE_DESCRIPTION’ drivers/power/s3c_adc_battery.c:436:20: warning: function declaration isn’t a prototype drivers/power/s3c_adc_battery.c:437:16: error: expected declaration specifiers or ‘...’ before string constant drivers/power/s3c_adc_battery.c:437:1: warning: data definition has no type or storage class drivers/power/s3c_adc_battery.c:437:1: warning: type defaults to ‘int’ in declaration of ‘MODULE_LICENSE’ drivers/power/s3c_adc_battery.c:437:16: warning: function declaration isn’t a prototype make[2]: *** [drivers/power/s3c_adc_battery.o] Error 1 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19max8997_charger: Needs module.hAxel Lin1-0/+1
power/max8997_charger.c uses interfaces from linux/module.h, so it should include that file. This fixes build errors. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19max8998_charger: Needs module.hRandy Dunlap1-0/+1
power/max8998_charger.c uses interfaces from linux/module.h, so it should include that file. This fixes build errors. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-31Merge git://git.infradead.org/battery-2.6Linus Torvalds13-102/+692
* git://git.infradead.org/battery-2.6: gpio-charger: Fix checking return value of request_any_context_irq power_supply: MAX17042: Support additional properties max8903_charger: Allow platform data to be __initdata power_supply: Add charger driver for MAX8998/LP3974 power_supply: Add charger driver for MAX8997/8966 max17042_battery: Remove obsolete cleanup for clientdata twl4030_charger: Fix warnings wm831x_power: Support multiple instances wm831x_backup: Support multiple instances apm_power: Fix style error in macros s3c_adc_battery: Fix annotation for s3c_adc_battery_probe() bq20z75: Enable detection after registering bq20z75: Add support for external notification
2011-07-08gpio-charger: Fix checking return value of request_any_context_irqAxel Lin1-1/+1
request_any_context_irq() returns a negative value on failure. On success, it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08power_supply: MAX17042: Support additional propertiesDonggeun Kim1-68/+105
This patch supports additional properties (PRESENT, CYCLE_COUNT, VOLTAGE_MAX, VOLTAGE_MIN_DESIGN, CURRENT_NOW, CURRENT_AVG, CHARGE_FULL, and TEMP). Plus, initialization code for registers is added. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: KyungMin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08max8903_charger: Allow platform data to be __initdataMyungJoo Ham1-8/+8
Platform files may have declared 8903 platform data as __initdata. This patch removes the dependency on pdata pointer so that using __initdata on pdata will not incur errors. Note that such error does not incur SECTION MISMATCH warning in (at least some) compilers. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08power_supply: Add charger driver for MAX8998/LP3974Donggeun Kim3-0/+226
This patch supports power supply APIs for MAX8998/LP3974. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: KyungMin Park <kyungmin.park@samsung.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08power_supply: Add charger driver for MAX8997/8966Donggeun Kim3-0/+214
MAX8997/8966 chip is a multi-function device which includes PMIC, RTC, Fuel Gauge, MUIC, Haptic, Flash control, and Battery charging control. The driver for it is located at drivers/mfd. This patch supports battery charging control of MAX8997/8966 chip and provides power supply class information to userspace. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: KyungMin Park <kyungmin.park@samsung.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08max17042_battery: Remove obsolete cleanup for clientdataWolfram Sang1-2/+0
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08twl4030_charger: Fix warningsGrazvydas Ignotas1-5/+5
Fix warnings emitted by some versions of gcc: drivers/power/twl4030_charger.c:490: warning: overflow in implicit constant conversion drivers/power/twl4030_charger.c:498: warning: overflow in implicit constant conversion While at it, also fix module_param permissions and a typo in my name. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08wm831x_power: Support multiple instancesMark Brown1-3/+23
If there are multiple wm831x devices in the system we need to assign different names to the power supply devices in order to ensure we can create the sysfs entries for them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08wm831x_backup: Support multiple instancesMark Brown1-1/+11
If there are multiple wm831x devices in the system we need to assign different names to the power supply devices in order to ensure we can create the sysfs entries for them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08apm_power: Fix style error in macrosKen O'Brien1-4/+4
Two macros in the changed file contained complex expressions which were not enclosed by parentheses. Signed-off-by: Ken O'Brien <kernel@kenobrien.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08s3c_adc_battery: Fix annotation for s3c_adc_battery_probe()Mark Brown1-1/+1
A probe() function is used at device init time rather than system init time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-25 23:38:58 +0300