summaryrefslogtreecommitdiff
path: root/drivers/power
AgeCommit message (Collapse)AuthorFilesLines
5 dayspower: supply: apm_power: only unset own apm_get_power_statusAhelenia Ziemiańska1-1/+2
[ Upstream commit bd44ea12919ac4e83c9f3997240fe58266aa8799 ] Mirroring drivers/macintosh/apm_emu.c, this means that modprobe apm_power && modprobe $anotherdriver && modprobe -r apm_power leaves $anotherdriver's apm_get_power_status instead of deleting it. Fixes: 3788ec932bfd ("[BATTERY] APM emulation driver for class batteries") Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Link: https://patch.msgid.link/xczpgox57hxbunkcbdl5fxhc4gnsajsipldfidi7355afezk64@tarta.nabijaczleweli.xyz Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
5 dayspower: supply: wm831x: Check wm831x_set_bits() return valueIvan Abramov1-2/+8
[ Upstream commit ea14bae6df18942bccb467fcf5ff33ca677b8253 ] Since wm831x_set_bits() may return error, log failure and exit from wm831x_usb_limit_change() in such case. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 626b6cd5f52e ("power: wm831x_power: Support USB charger current limit management") Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru> Link: https://patch.msgid.link/20251009170553.566561-1-i.abramov@mt-integration.ru Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-02power: supply: bq27xxx: restrict no-battery detection to bq27000H. Nikolaus Schaller1-2/+2
commit 1e451977e1703b6db072719b37cd1b8e250b9cc9 upstream. There are fuel gauges in the bq27xxx series (e.g. bq27z561) which may in some cases report 0xff as the value of BQ27XXX_REG_FLAGS that should not be interpreted as "no battery" like for a disconnected battery with some built in bq27000 chip. So restrict the no-battery detection originally introduced by commit 3dd843e1c26a ("bq27000: report missing device better.") to the bq27000. There is no need to backport further because this was hidden before commit f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy") Fixes: f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy") Suggested-by: Jerry Lv <Jerry.Lv@axis.com> Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/dd979fa6855fd051ee5117016c58daaa05966e24.1755945297.git.hns@goldelico.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-02power: supply: bq27xxx: fix error return in case of no bq27000 hdq batteryH. Nikolaus Schaller1-1/+1
commit 2c334d038466ac509468fbe06905a32d202117db upstream. Since commit commit f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy") the console log of some devices with hdq enabled but no bq27000 battery (like e.g. the Pandaboard) is flooded with messages like: [ 34.247833] power_supply bq27000-battery: driver failed to report 'status' property: -1 as soon as user-space is finding a /sys entry and trying to read the "status" property. It turns out that the offending commit changes the logic to now return the value of cache.flags if it is <0. This is likely under the assumption that it is an error number. In normal errors from bq27xxx_read() this is indeed the case. But there is special code to detect if no bq27000 is installed or accessible through hdq/1wire and wants to report this. In that case, the cache.flags are set historically by commit 3dd843e1c26a ("bq27000: report missing device better.") to constant -1 which did make reading properties return -ENODEV. So everything appeared to be fine before the return value was passed upwards. Now the -1 is returned as -EPERM instead of -ENODEV, triggering the error condition in power_supply_format_property() which then floods the console log. So we change the detection of missing bq27000 battery to simply set cache.flags = -ENODEV instead of -1. Fixes: f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy") Cc: Jerry Lv <Jerry.Lv@axis.com> Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/692f79eb6fd541adb397038ea6e750d4de2deddf.1755945297.git.hns@goldelico.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28power: supply: max14577: Handle NULL pdata when CONFIG_OF is not setCharles Han1-2/+2
[ Upstream commit 2937f5d2e24eefef8cb126244caec7fe3307f724 ] When the kernel is not configured CONFIG_OF, the max14577_charger_dt_init function returns NULL. Fix the max14577_charger_probe functionby returning -ENODATA instead of potentially passing a NULL pointer to PTR_ERR. This fixes the below smatch warning: max14577_charger_probe() warn: passing zero to 'PTR_ERR' Fixes: e30110e9c96f ("charger: max14577: Configure battery-dependent settings from DTS and sysfs") Signed-off-by: Charles Han <hanchunchao@inspur.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250519061601.8755-1-hanchunchao@inspur.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27power: supply: bq27xxx: Retrieve again when busyJerry Lv2-2/+13
[ Upstream commit f16d9fb6cf03fdbdefa41a8b32ba1e57afb7ae3d ] Multiple applications may access the battery gauge at the same time, so the gauge may be busy and EBUSY will be returned. The driver will set a flag to record the EBUSY state, and this flag will be kept until the next periodic update. When this flag is set, bq27xxx_battery_get_property() will just return ENODEV until the flag is updated. Even if the gauge was busy during the last accessing attempt, returning ENODEV is not ideal, and can cause confusion in the applications layer. Instead, retry accessing the I2C to update the flag is as expected, for the gauge typically recovers from busy state within a few milliseconds. If still failed to access the gauge, the real error code would be returned instead of ENODEV (as suggested by Pali Rohár). Reviewed-by: Pali Rohár <pali@kernel.org> Signed-off-by: Jerry Lv <Jerry.Lv@axis.com> Link: https://lore.kernel.org/r/20250415-foo-fix-v2-1-5b45a395e4cc@axis.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27power: reset: at91-reset: Optimize at91_reset()Alexander Shiyan1-3/+2
[ Upstream commit 62d48983f215bf1dd48665913318101fa3414dcf ] This patch adds a small optimization to the low-level at91_reset() function, which includes: - Removes the extra branch, since the following store operations already have proper condition checks. - Removes the definition of the clobber register r4, since it is no longer used in the code. Fixes: fcd0532fac2a ("power: reset: at91-reset: make at91sam9g45_restart() generic") Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20250307053809.20245-1-eagle.alexander923@gmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10power: supply: max77693: Fix wrong conversion of charge input threshold valueArtur Weber1-1/+1
[ Upstream commit 30cc7b0d0e9341d419eb7da15fb5c22406dbe499 ] The charge input threshold voltage register on the MAX77693 PMIC accepts four values: 0x0 for 4.3v, 0x1 for 4.7v, 0x2 for 4.8v and 0x3 for 4.9v. Due to an oversight, the driver calculated the values for 4.7v and above starting from 0x0, rather than from 0x1 ([(4700000 - 4700000) / 100000] gives 0). Add 1 to the calculation to ensure that 4.7v is converted to a register value of 0x1 and that the other two voltages are converted correctly as well. Fixes: 87c2d9067893 ("power: max77693: Add charger driver for Maxim 77693") Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250316-max77693-charger-input-threshold-fix-v1-1-2b037d0ac722@gmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13power: supply: da9150-fg: fix potential overflowAndrey Vatoropin1-2/+2
[ Upstream commit 3fb3cb4350befc4f901c54e0cb4a2a47b1302e08 ] Size of variable sd_gain equals four bytes - DA9150_QIF_SD_GAIN_SIZE. Size of variable shunt_val equals two bytes - DA9150_QIF_SHUNT_VAL_SIZE. The expression sd_gain * shunt_val is currently being evaluated using 32-bit arithmetic. So during the multiplication an overflow may occur. As the value of type 'u64' is used as storage for the eventual result, put ULL variable at the first position of each expression in order to give the compiler complete information about the proper arithmetic to use. According to C99 the guaranteed width for a variable of type 'unsigned long long' >= 64 bits. Remove the explicit cast to u64 as it is meaningless. Just for the sake of consistency, perform the similar trick with another expression concerning 'iavg'. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: a419b4fd9138 ("power: Add support for DA9150 Fuel-Gauge") Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru> Link: https://lore.kernel.org/r/20250130090030.53422-1-a.vatoropin@crpt.ru Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-09power: supply: gpio-charger: Fix set charge current limitsDimitri Fedrau1-0/+8
commit afc6e39e824ad0e44b2af50a97885caec8d213d1 upstream. Fix set charge current limits for devices which allow to set the lowest charge current limit to be greater zero. If requested charge current limit is below lowest limit, the index equals current_limit_map_size which leads to accessing memory beyond allocated memory. Fixes: be2919d8355e ("power: supply: gpio-charger: add charge-current-limit feature") Cc: stable@vger.kernel.org Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com> Link: https://lore.kernel.org/r/20241209-fix-charge-current-limit-v1-1-760d9b8f2af3@liebherr.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14power: supply: bq27xxx: Fix registers of bq27426Barnabás Czémán1-2/+35
[ Upstream commit 34f99d3b706a519e556841f405c224ca708b1f54 ] Correct bq27426 registers, according to technical reference manual it does not have Design Capacity register so it is not register compatible with bq27421. Fixes: 5ef6a16033b47 ("power: supply: bq27xxx: Add support for BQ27426") Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Link: https://lore.kernel.org/r/20241016-fix_bq27426-v2-1-aa6c0f51a9f6@mainlining.org Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14power: supply: bq27xxx: Support CHARGE_NOW for bq27z561/bq28z610/bq34z100Hermes Zhang1-1/+34
[ Upstream commit 3ed510f06e12f8876c20474766cc2f101a41174f ] Currently REG_NAC (nominal available capacity) is mapped to power-supply's CHARGE_NOW property. Some chips do not have REG_NAC and do not expose CHARGE_NOW at the moment. Some bq27xxx chips also have another register REG_RM (remaining capacity). The difference between REG_NAC and REG_RM is load compensation. This patch adds register information for REG_RM for all supported fuel gauges. On systems having REG_NAC it is ignored, so behaviour does not change. On systems without REG_NAC, REG_RM will be used to provide CHARGE_NOW functionality. As a result there are three more chips exposing CHARGE_NOW: bq27z561, bq28z610 and bq34z100 Signed-off-by: Hermes Zhang <chenhuiz@axis.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Stable-dep-of: 34f99d3b706a ("power: supply: bq27xxx: Fix registers of bq27426") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14power: supply: core: Remove might_sleep() from power_supply_put()Bart Van Assche1-2/+0
[ Upstream commit f6da4553ff24a5d1c959c9627c965323adc3d307 ] The put_device() call in power_supply_put() may call power_supply_dev_release(). The latter function does not sleep so power_supply_put() doesn't sleep either. Hence, remove the might_sleep() call from power_supply_put(). This patch suppresses false positive complaints about calling a sleeping function from atomic context if power_supply_put() is called from atomic context. Cc: Kyle Tso <kyletso@google.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 1a352462b537 ("power_supply: Add power_supply_put for decrementing device reference counter") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240917193914.47566-1-bvanassche@acm.org Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17power: reset: brcmstb: Do not go into infinite loop if reset failsAndrew Davis1-3/+0
[ Upstream commit cf8c39b00e982fa506b16f9d76657838c09150cb ] There may be other backup reset methods available, do not halt here so that other reset methods can be tried. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240610142836.168603-5-afd@ti.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17power: supply: max17042_battery: Fix SOC threshold calc w/ no current senseArtur Weber1-1/+4
[ Upstream commit 3a3acf839b2cedf092bdd1ff65b0e9895df1656b ] Commit 223a3b82834f ("power: supply: max17042_battery: use VFSOC for capacity when no rsns") made it so that capacity on systems without current sensing would be read from VFSOC instead of RepSOC. However, the SOC threshold calculation still read RepSOC to get the SOC regardless of the current sensing option state. Fix this by applying the same conditional to determine which register should be read. This also seems to be the intended behavior as per the datasheet - SOC alert config value in MiscCFG on setups without current sensing is set to a value of 0b11, indicating SOC alerts being generated based on VFSOC, instead of 0b00 which indicates SOC alerts being generated based on RepSOC. This fixes an issue on the Galaxy S3/Midas boards, where the alert interrupt would be constantly retriggered, causing high CPU usage on idle (around ~12%-15%). Fixes: e5f3872d2044 ("max17042: Add support for signalling change in SOC") Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Henrik Grimler <henrik@grimler.se> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240817-max17042-soc-threshold-fix-v1-1-72b45899c3cc@gmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17power: supply: axp20x_battery: Remove design from min and max voltageChris Morgan1-8/+8
[ Upstream commit 61978807b00f8a1817b0e5580981af1cd2f428a5 ] The POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN and POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN values should be immutable properties of the battery, but for this driver they are writable values and used as the minimum and maximum values for charging. Remove the DESIGN designation from these values. Fixes: 46c202b5f25f ("power: supply: add battery driver for AXP20X and AXP22X PMICs") Suggested-by: Chen-Yu Tsai <wens@kernel.org> Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240821215456.962564-3-macroalpha82@gmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17power: supply: axp20x_battery: allow disabling battery chargingHermann Lauer1-2/+15
[ Upstream commit 6a0fcc87c9e35191d37a8819fdab9d30e523515b ] Allow disabling and re-enabling battery charging of an axp209 PMIC through a writable status property. With the current driver code charging is always on. This works on the axp209 of Banana {Pi M1+,Pro} and should work on all AXP chips. Signed-off-by: Hermann.Lauer@uni-heidelberg.de Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Stable-dep-of: 61978807b00f ("power: supply: axp20x_battery: Remove design from min and max voltage") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-19power: supply: axp288_charger: Round constant_charge_voltage writes downHans de Goede1-9/+9
commit 81af7f2342d162e24ac820c10e68684d9f927663 upstream. Round constant_charge_voltage writes down to the first supported lower value, rather then rounding them up to the first supported higher value. This fixes e.g. writing 4250000 resulting in a value of 4350000 which might be dangerous, instead writing 4250000 will now result in a safe 4200000 value. Fixes: 843735b788a4 ("power: axp288_charger: axp288 charger driver") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240717200333.56669-2-hdegoede@redhat.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-19power: supply: axp288_charger: Fix constant_charge_voltage writesHans de Goede1-2/+2
commit b34ce4a59cfe9cd0d6f870e6408e8ec88a964585 upstream. info->max_cv is in millivolts, divide the microvolt value being written to constant_charge_voltage by 1000 *before* clamping it to info->max_cv. Before this fix the code always tried to set constant_charge_voltage to max_cv / 1000 = 4 millivolt, which ends up in setting it to 4.1V which is the lowest supported value. Fixes: 843735b788a4 ("power: axp288_charger: axp288 charger driver") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240717200333.56669-1-hdegoede@redhat.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-05power: supply: cros_usbpd: provide ID table for avoiding fallback matchTzung-Bi Shih1-2/+9
[ Upstream commit 0f8678c34cbfdc63569a9b0ede1fe235ec6ec693 ] Instead of using fallback driver name match, provide ID table[1] for the primary match. [1]: https://elixir.bootlin.com/linux/v6.8/source/drivers/base/platform.c#L1353 Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Link: https://lore.kernel.org/r/20240401030052.2887845-4-tzungbi@kernel.org Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17power: rt9455: hide unused rt9455_boost_voltage_valuesArnd Bergmann1-0/+2
[ Upstream commit 452d8950db3e839aba1bb13bc5378f4bac11fa04 ] The rt9455_boost_voltage_values[] array is only used when USB PHY support is enabled, causing a W=1 warning otherwise: drivers/power/supply/rt9455_charger.c:200:18: error: 'rt9455_boost_voltage_values' defined but not used [-Werror=unused-const-variable=] Enclose the definition in the same #ifdef as the references to it. Fixes: e86d69dd786e ("power_supply: Add support for Richtek RT9455 battery charger") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240403080702.3509288-10-arnd@kernel.org Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-06power: supply: bq27xxx-i2c: Do not free non existing IRQHans de Goede1-1/+3
[ Upstream commit 2df70149e73e79783bcbc7db4fa51ecef0e2022c ] The bq27xxx i2c-client may not have an IRQ, in which case client->irq will be 0. bq27xxx_battery_i2c_probe() already has an if (client->irq) check wrapping the request_threaded_irq(). But bq27xxx_battery_i2c_remove() unconditionally calls free_irq(client->irq) leading to: [ 190.310742] ------------[ cut here ]------------ [ 190.310843] Trying to free already-free IRQ 0 [ 190.310861] WARNING: CPU: 2 PID: 1304 at kernel/irq/manage.c:1893 free_irq+0x1b8/0x310 Followed by a backtrace when unbinding the driver. Add an if (client->irq) to bq27xxx_battery_i2c_remove() mirroring probe() to fix this. Fixes: 444ff00734f3 ("power: supply: bq27xxx: Fix I2C IRQ race on remove") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240215155133.70537-1-hdegoede@redhat.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26power: supply: cw2015: correct time_to_empty units in sysfsJan Palus1-1/+1
[ Upstream commit f37669119423ca852ca855b24732f25c0737aa57 ] RRT_ALRT register holds remaining battery time in minutes therefore it needs to be scaled accordingly when exposing TIME_TO_EMPTY via sysfs expressed in seconds Fixes: b4c7715c10c1 ("power: supply: add CellWise cw2015 fuel gauge driver") Signed-off-by: Jan Palus <jpalus@fastmail.com> Link: https://lore.kernel.org/r/20231111221704.5579-1-jpalus@fastmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10power: supply: ucs1002: fix error code in ucs1002_get_property()Dan Carpenter1-1/+2
[ Upstream commit e35059949daa83f8dadf710d0f829ab3c3a72fe2 ] This function is supposed to return 0 for success instead of returning the val->intval. This makes it the same as the other case statements in this function. Fixes: 81196e2e57fc ("power: supply: ucs1002: fix some health status issues") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/687f64a4-4c6e-4536-8204-98ad1df934e5@moroto.mountain Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21power: supply: Fix logic checking if system is running from batteryMario Limonciello1-2/+6
[ Upstream commit 95339f40a8b652b5b1773def31e63fc53c26378a ] The logic used for power_supply_is_system_supplied() counts all power supplies and assumes that the system is running from AC if there is either a non-battery power-supply reporting to be online or if no power-supplies exist at all. The second rule is for desktop systems, that don't have any battery/charger devices. These systems will incorrectly report to be powered from battery once a device scope power-supply is registered (e.g. a HID device), since these power-supplies increase the counter. Apart from HID devices, recent dGPUs provide UCSI power supplies on a desktop systems. The dGPU by default doesn't have anything plugged in so it's 'offline'. This makes power_supply_is_system_supplied() return 0 with a count of 1 meaning all drivers that use this get a wrong judgement. To fix this case adjust the logic to also examine the scope of the power supply. If the power supply is deemed a device power supply, then don't count it. Cc: Evan Quan <Evan.Quan@amd.com> Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21power: supply: Ratelimit no data debug outputMarek Vasut1-1/+2
[ Upstream commit 155c45a25679f571c2ae57d10db843a9dfc63430 ] Reduce the amount of output this dev_dbg() statement emits into logs, otherwise if system software polls the sysfs entry for data and keeps getting -ENODATA, it could end up filling the logs up. This does in fact make systemd journald choke, since during boot the sysfs power supply entries are polled and if journald starts at the same time, the journal is just being repeatedly filled up, and the system stops on trying to start journald without booting any further. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21power: supply: bq27xxx: Use mod_delayed_work() instead of cancel() + schedule()Hans de Goede1-4/+2
[ Upstream commit 59dddea9879713423c7b2ade43c423bb71e0d216 ] Use mod_delayed_work() instead of separate cancel_delayed_work_sync() + schedule_delayed_work() calls. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21power: supply: sc27xx: Fix external_power_changed raceHans de Goede1-8/+1
[ Upstream commit 4d5c129d6c8993fe96e9ae712141eedcb9ca68c2 ] sc27xx_fgu_external_power_changed() dereferences data->battery, which gets sets in ab8500_btemp_probe() like this: data->battery = devm_power_supply_register(dev, &sc27xx_fgu_desc, &fgu_cfg); As soon as devm_power_supply_register() has called device_add() the external_power_changed callback can get called. So there is a window where sc27xx_fgu_external_power_changed() may get called while data->battery has not been set yet leading to a NULL pointer dereference. Fixing this is easy. The external_power_changed callback gets passed the power_supply which will eventually get stored in data->battery, so sc27xx_fgu_external_power_changed() can simply directly use the passed in psy argument which is always valid. After this change sc27xx_fgu_external_power_changed() is reduced to just "power_supply_changed(psy);" and it has the same prototype. While at it simply replace it with making the external_power_changed callback directly point to power_supply_changed. Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21power: supply: ab8500: Fix external_power_changed raceHans de Goede2-8/+4
[ Upstream commit a5299ce4e96f3e8930e9c051b28d8093ada87b08 ] ab8500_btemp_external_power_changed() dereferences di->btemp_psy, which gets sets in ab8500_btemp_probe() like this: di->btemp_psy = devm_power_supply_register(dev, &ab8500_btemp_desc, &psy_cfg); As soon as devm_power_supply_register() has called device_add() the external_power_changed callback can get called. So there is a window where ab8500_btemp_external_power_changed() may get called while di->btemp_psy has not been set yet leading to a NULL pointer dereference. Fixing this is easy. The external_power_changed callback gets passed the power_supply which will eventually get stored in di->btemp_psy, so ab8500_btemp_external_power_changed() can simply directly use the passed in psy argument which is always valid. And the same applies to ab8500_fg_external_power_changed(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-05power: supply: bq24190: Call power_supply_changed() after updating input currentHans de Goede1-0/+1
[ Upstream commit 77c2a3097d7029441e8a91aa0de1b4e5464593da ] The bq24192 model relies on external charger-type detection and once that is done the bq24190_charger code will update the input current. In this case, when the initial power_supply_changed() call is made from the interrupt handler, the input settings are 5V/0.5A which on many devices is not enough power to charge (while the device is on). On many devices the fuel-gauge relies in its external_power_changed callback to timely signal userspace about charging <-> discharging status changes. Add a power_supply_changed() call after updating the input current. This allows the fuel-gauge driver to timely recheck if the battery is charging after the new input current has been applied and then it can immediately notify userspace about this. Fixes: 18f8e6f695ac ("power: supply: bq24190_charger: Get input_current_limit from our supplier") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-05power: supply: core: Refactor ↵Hans de Goede2-28/+41
power_supply_set_input_current_limit_from_supplier() [ Upstream commit 2220af8ca61ae67de4ec3deec1c6395a2f65b9fd ] Some (USB) charger ICs have variants with USB D+ and D- pins to do their own builtin charger-type detection, like e.g. the bq24190 and bq25890 and also variants which lack this functionality, e.g. the bq24192 and bq25892. In case the charger-type; and thus the input-current-limit detection is done outside the charger IC then we need some way to communicate this to the charger IC. In the past extcon was used for this, but if the external detection does e.g. full USB PD negotiation then the extcon cable-types do not convey enough information. For these setups it was decided to model the external charging "brick" and the parameters negotiated with it as a power_supply class-device itself; and power_supply_set_input_current_limit_from_supplier() was introduced to allow drivers to get the input-current-limit this way. But in some cases psy drivers may want to know other properties, e.g. the bq25892 can do "quick-charge" negotiation by pulsing its current draw, but this should only be done if the usb_type psy-property of its supplier is set to DCP (and device-properties indicate the board allows higher voltages). Instead of adding extra helper functions for each property which a psy-driver wants to query from its supplier, refactor power_supply_set_input_current_limit_from_supplier() into a more generic power_supply_get_property_from_supplier() function. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Stable-dep-of: 77c2a3097d70 ("power: supply: bq24190: Call power_supply_changed() after updating input current") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-05power: supply: bq27xxx: After charger plug in/out wait 0.5s for things to ↵Hans de Goede1-2/+2
stabilize [ Upstream commit 59a99cd462fbdf71f4e845e09f37783035088b4f ] bq27xxx_external_power_changed() gets called when the charger is plugged in or out. Rather then immediately scheduling an update wait 0.5 seconds for things to stabilize, so that e.g. the (dis)charge current is stable when bq27xxx_battery_update() runs. Fixes: 740b755a3b34 ("bq27x00: Poll battery state") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-05power: supply: bq27xxx: Ensure power_supply_changed() is called on current ↵Hans de Goede1-1/+12
sign changes [ Upstream commit 939a116142012926e25de0ea6b7e2f8d86a5f1b6 ] On gauges where the current register is signed, there is no charging flag in the flags register. So only checking flags will not result in power_supply_changed() getting called when e.g. a charger is plugged in and the current sign changes from negative (discharging) to positive (charging). This causes userspace's notion of the status to lag until userspace does a poll. And when a power_supply_leds.c LED trigger is used to indicate charging status with a LED, this LED will lag until the capacity percentage changes, which may take many minutes (because the LED trigger only is updated on power_supply_changed() calls). Fix this by calling bq27xxx_battery_current_and_status() on gauges with a signed current register and checking if the status has changed. Fixes: 297a533b3e62 ("bq27x00: Cache battery registers") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-05power: supply: bq27xxx: Move bq27xxx_battery_update() downHans de Goede1-61/+61
[ Upstream commit ff4c4a2a4437a6d03787c7aafb2617f20c3ef45f ] Move the bq27xxx_battery_update() functions to below the bq27xxx_battery_current_and_status() function. This is just moving a block of text, no functional changes. This is a preparation patch for making bq27xxx_battery_update() check the status and have it call power_supply_changed() on status changes. Fixes: 297a533b3e62 ("bq27x00: Cache battery registers") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-05power: supply: bq27xxx: expose battery data when CI=1Sicelo A. Mhlongo1-33/+27
[ Upstream commit 68fdbe090c362e8be23890a7333d156e18c27781 ] When the Capacity Inaccurate flag is set, the chip still provides data about the battery, albeit inaccurate. Instead of discarding capacity values for CI=1, expose the stale data and use the POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED property to indicate that the values should be used with care. Reviewed-by: Pali Rohár <pali@kernel.org> Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Stable-dep-of: ff4c4a2a4437 ("power: supply: bq27xxx: Move bq27xxx_battery_update() down") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-05power: supply: bq27xxx: Add cache parameter to ↵Hans de Goede1-7/+12
bq27xxx_battery_current_and_status() [ Upstream commit 35092c5819f8c5acc7bafe3fdbb13d6307c4f5e1 ] Add a cache parameter to bq27xxx_battery_current_and_status() so that it can optionally use cached flags instead of re-reading them itself. This is a preparation patch for making bq27xxx_battery_update() check the status and have it call power_supply_changed() on status changes. Fixes: 297a533b3e62 ("bq27x00: Cache battery registers") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-05power: supply: bq27xxx: make status more robustMatthias Schiffer1-45/+43
[ Upstream commit c3a6d6a1dfc8a9bf12d79a0b1a30cb24c92a2ddf ] There are multiple issues in bq27xxx_battery_status(): - On BQ28Q610 is was observed that the "full" flag may be set even while the battery is charging or discharging. With the current logic to make "full" override everything else, it look a very long time (>20min) for the status to change from "full" to "discharging" after unplugging the supply on a device with low power consumption - The POWER_SUPPLY_STATUS_NOT_CHARGING check depends on power_supply_am_i_supplied(), which will not work when the supply doesn't exist as a separate device known to Linux We can solve both issues by deriving the status from the current instead of the flags field. The flags are now only used to distinguish "full" from "not charging", and to determine the sign of the current on BQ27XXX_O_ZERO devices. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Stable-dep-of: 35092c5819f8 ("power: supply: bq27xxx: Add cache parameter to bq27xxx_battery_current_and_status()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-05power: supply: bq27xxx: fix sign of current_now for newer ICsMatthias Schiffer1-1/+1
[ Upstream commit b67fdcb7099e9c640bad625c4dd6399debb3376a ] Commit cd060b4d0868 ("power: supply: bq27xxx: fix polarity of current_now") changed the sign of current_now for all bq27xxx variants, but on BQ28Z610 I'm now seeing negated values *with* that patch. The GTA04/Openmoko device that was used for testing uses a BQ27000 or BQ27010 IC, so I assume only the BQ27XXX_O_ZERO code path was incorrect. Revert the behaviour for newer ICs. Fixes: cd060b4d0868 "power: supply: bq27xxx: fix polarity of current_now" Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Stable-dep-of: 35092c5819f8 ("power: supply: bq27xxx: Add cache parameter to bq27xxx_battery_current_and_status()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-05power: supply: bq27xxx: fix polarity of current_nowAndreas Kemnade1-2/+2
[ Upstream commit cd060b4d0868c806c2738a5e64e8ab9bd0fbec07 ] current_now has to be negative during discharging and positive during charging, the behavior seen is the other way round. Tested on GTA04 with Openmoko battery. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Stable-dep-of: 35092c5819f8 ("power: supply: bq27xxx: Add cache parameter to bq27xxx_battery_current_and_status()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-30power: supply: sbs-charger: Fix INHIBITED bit for Status regDaisuke Nojiri1-1/+1
commit b2f2a3c9800208b0db2c2e34b05323757117faa2 upstream. CHARGE_INHIBITED bit position of the ChargerStatus register is actually 0 not 1. This patch corrects it. Fixes: feb583e37f8a8 ("power: supply: add sbs-charger driver") Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30power: supply: bq27xxx: Fix poll_interval handling and races on removeHans de Goede1-13/+9
commit c00bc80462afc7963f449d7f21d896d2f629cacc upstream. Before this patch bq27xxx_battery_teardown() was setting poll_interval = 0 to avoid bq27xxx_battery_update() requeuing the delayed_work item. There are 2 problems with this: 1. If the driver is unbound through sysfs, rather then the module being rmmod-ed, this changes poll_interval unexpectedly 2. This is racy, after it being set poll_interval could be changed before bq27xxx_battery_update() checks it through /sys/module/bq27xxx_battery/parameters/poll_interval Fix this by added a removed attribute to struct bq27xxx_device_info and using that instead of setting poll_interval to 0. There also is another poll_interval related race on remove(), writing /sys/module/bq27xxx_battery/parameters/poll_interval will requeue the delayed_work item for all devices on the bq27xxx_battery_devices list and the device being removed was only removed from that list after cancelling the delayed_work item. Fix this by moving the removal from the bq27xxx_battery_devices list to before cancelling the delayed_work item. Fixes: 8cfaaa811894 ("bq27x00_battery: Fix OOPS caused by unregistring bq27x00 driver") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30power: supply: bq27xxx: Fix I2C IRQ race on removeHans de Goede1-1/+2
commit 444ff00734f3878cd54ddd1ed5e2e6dbea9326d5 upstream. devm_request_threaded_irq() requested IRQs are only free-ed after the driver's remove function has ran. So the IRQ could trigger and call bq27xxx_battery_update() after bq27xxx_battery_teardown() has already run. Switch to explicitly free-ing the IRQ in bq27xxx_battery_i2c_remove() to fix this. Fixes: 8807feb91b76 ("power: bq27xxx_battery: Add interrupt handling support") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30power: supply: bq27xxx: Fix bq27xxx_battery_update() race conditionHans de Goede1-8/+13
commit 5c34c0aef185dcd10881847b9ebf20046aa77cb4 upstream. bq27xxx_battery_update() assumes / requires that it is only run once, not multiple times at the same time. But there are 3 possible callers: 1. bq27xxx_battery_poll() delayed_work item handler 2. bq27xxx_battery_irq_handler_thread() I2C IRQ handler 3. bq27xxx_battery_setup() And there is no protection against these racing with each other, fix this race condition by making all callers take di->lock: - Rename bq27xxx_battery_update() to bq27xxx_battery_update_unlocked() - Add new bq27xxx_battery_update() which takes di->lock and then calls bq27xxx_battery_update_unlocked() - Make stale cache check code in bq27xxx_battery_get_property(), which already takes di->lock directly to check the jiffies, call bq27xxx_battery_update_unlocked() instead of messing with the delayed_work item - Make bq27xxx_battery_update_unlocked() mod the delayed-work item so that the next poll is delayed to poll_interval milliseconds after the last update independent of the source of the update Fixes: 740b755a3b34 ("bq27x00: Poll battery state") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30power: supply: leds: Fix blink to LED on transitionHans de Goede1-2/+3
commit e4484643991e0f6b89060092563f0dbab9450cbb upstream. When a battery's status changes from charging to full then the charging-blink-full-solid trigger tries to change the LED from blinking to solid/on. As is documented in include/linux/leds.h to deactivate blinking / to make the LED solid a LED_OFF must be send: """ * Deactivate blinking again when the brightness is set to LED_OFF * via the brightness_set() callback. """ led_set_brighness() calls with a brightness value other then 0 / LED_OFF merely change the brightness of the LED in its on state while it is blinking. So power_supply_update_bat_leds() must first send a LED_OFF event before the LED_FULL to disable blinking. Fixes: 6501f728c56f ("power_supply: Add new LED trigger charging-blink-solid-full") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-17power: supply: generic-adc-battery: fix unit scalingSebastian Reichel1-0/+3
[ Upstream commit 44263f50065969f2344808388bd589740f026167 ] power-supply properties are reported in µV, µA and µW. The IIO API provides mV, mA, mW, so the values need to be multiplied by 1000. Fixes: e60fea794e6e ("power: battery: Generic battery driver using IIO") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-20power: supply: cros_usbpd: reclassify "default case!" as debugGrant Grundler1-1/+1
[ Upstream commit 14c76b2e75bca4d96e2b85a0c12aa43e84fe3f74 ] This doesn't need to be printed every second as an error: ... <3>[17438.628385] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case! <3>[17439.634176] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case! <3>[17440.640298] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case! ... Reduce priority from ERROR to DEBUG. Signed-off-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05power: supply: da9150: Fix use after free bug in da9150_charger_remove due ↵Zheng Wang1-0/+1
to race condition [ Upstream commit 06615d11cc78162dfd5116efb71f29eb29502d37 ] In da9150_charger_probe, &charger->otg_work is bound with da9150_charger_otg_work. da9150_charger_otg_ncb may be called to start the work. If we remove the module which will call da9150_charger_remove to make cleanup, there may be a unfinished work. The possible sequence is as follows: Fix it by canceling the work before cleanup in the da9150_charger_remove CPU0 CPUc1 |da9150_charger_otg_work da9150_charger_remove | power_supply_unregister | device_unregister | power_supply_dev_release| kfree(psy) | | | power_supply_changed(charger->usb); | //use Fixes: c1a281e34dae ("power: Add support for DA9150 Charger") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05power: supply: bq24190: Fix use after free bug in bq24190_remove due to race ↵Zheng Wang1-0/+1
condition [ Upstream commit 47c29d69212911f50bdcdd0564b5999a559010d4 ] In bq24190_probe, &bdi->input_current_limit_work is bound with bq24190_input_current_limit_work. When external power changed, it will call bq24190_charger_external_power_changed to start the work. If we remove the module which will call bq24190_remove to make cleanup, there may be a unfinished work. The possible sequence is as follows: CPU0 CPUc1 |bq24190_input_current_limit_work bq24190_remove | power_supply_unregister | device_unregister | power_supply_dev_release| kfree(psy) | | | power_supply_get_property_from_supplier | //use Fix it by finishing the work before cleanup in the bq24190_remove Fixes: 97774672573a ("power_supply: Initialize changed_work before calling device_add") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05power: supply: bq24190_charger: using pm_runtime_resume_and_get instead of ↵Minghao Chi1-42/+21
pm_runtime_get_sync [ Upstream commit d96a89407e5f682d1cb22569d91784506c784863 ] Using pm_runtime_resume_and_get is more appropriate for simplifing code Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Stable-dep-of: 47c29d692129 ("power: supply: bq24190: Fix use after free bug in bq24190_remove due to race condition") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14power: supply: fix null pointer dereferencing in power_supply_get_battery_inforuanjinjie1-0/+5
[ Upstream commit 104bb8a663451404a26331263ce5b96c34504049 ] when kmalloc() fail to allocate memory in kasprintf(), propname will be NULL, strcmp() called by of_get_property() will cause null pointer dereference. So return ENOMEM if kasprintf() return NULL pointer. Fixes: 3afb50d7125b ("power: supply: core: Add some helpers to use the battery OCV capacity table") Signed-off-by: ruanjinjie <ruanjinjie@huawei.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-24 23:48:26 +0300