Age | Commit message (Collapse) | Author | Files | Lines |
|
Simplify error handling (less gotos) over locks with guard().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-pm-domain-v1-8-8320722eaf39@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Simplify error handling (less gotos) over locks with guard().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-pm-domain-v1-7-8320722eaf39@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Simplify error handling (less gotos) over locks with guard().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-pm-domain-v1-6-8320722eaf39@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use dev_err_probe() to make defer code handling simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-pm-domain-v1-5-8320722eaf39@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-pm-domain-v1-4-8320722eaf39@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-pm-domain-v1-3-8320722eaf39@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Simplify error handling (smaller error handling) over locks with
guard().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-pm-domain-v1-2-8320722eaf39@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use scoped for_each_available_child_of_node_scoped() and
for_each_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-pm-domain-v1-1-8320722eaf39@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use scope based of_node_put() to simplify the code logic, and we don't
need to call of_node_put(). This will simplify the code a lot.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240821034022.27394-3-zhangzekun11@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
for_each_available_child_of_node() can help to iterate through the
device_node, and we don't need to use while loop. Besides, the purpose
of the while loop is to find a device_node which fits the condition
"child_req_np == ref_np", we can just read the property of "child_np"
directly in for_each_available_child_of_node(). No functional change
with such conversion.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240821034022.27394-2-zhangzekun11@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The sparse tool complains as follows:
drivers/pmdomain/apple/pmgr-pwrstate.c:180:32: warning:
symbol 'apple_pmgr_reset_ops' was not declared. Should it be static:
This symbol is not used outside of pmgr-pwrstate.c, so marks it static.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240819115956.3884847-1-ruanjinjie@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add configuration for RK3576 SoC and list the power domains.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Elaine Zhang<zhangqing@rock-chips.com>
Link: https://lore.kernel.org/r/20240814222824.3170-3-detlev.casanova@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the pmdomain fixes for v6.11-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.12.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
With "quiet" set in bootargs, there is power domain failure:
"imx93_power_domain 44462400.power-domain: pd_off timeout: name:
44462400.power-domain, stat: 4"
The current power on opertation takes ISO state as power on finished
flag, but it is wrong. Before powering on operation really finishes,
powering off comes and powering off will never finish because the last
powering on still not finishes, so the following powering off actually
not trigger hardware state machine to run. SSAR is the last step when
powering on a domain, so need to wait SSAR done when powering on.
Since EdgeLock Enclave(ELE) handshake is involved in the flow, enlarge
the waiting time to 10ms for both on and off to avoid timeout.
Cc: stable@vger.kernel.org
Fixes: 0a0f7cc25d4a ("soc: imx: add i.MX93 SRC power domain driver")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240814124740.2778952-1-peng.fan@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Set flag GENPD_FLAG_ACTIVE_WAKEUP to rpi_power genpd, then when a device
is set as wakeup source using device_set_wakeup_enable, the power
domain could be kept on to make sure the device could wakeup the system.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240728114200.75559-6-wahrenst@gmx.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Raspberry Pi power driver heavily relies on the logging of the
underlying firmware driver. This results in disadvantages like unspecific
error messages or limited debugging options. So implement the logging for
the most important function rpi_firmware_set_power.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240728114200.75559-5-wahrenst@gmx.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
According to the official Mailbox property interface the second part
of RPI_FIRMWARE_SET_POWER_STATE ( and so on ...) is named state because
it represent u32 flags and just the lowest bit is for on/off. So rename it
to align with documentation and prepare the driver for further changes.
Link: https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240728114200.75559-4-wahrenst@gmx.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the pmdomain fixes for v6.11-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.12.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Using kobject_get_path() means a dynamic memory allocation gets done, which
doesn't work on a PREEMPT_RT based configuration while holding genpd's raw
spinlock.
To fix the problem, let's convert into using the simpler dev_name(). This
means the information about the path doesn't get presented in debugfs, but
hopefully this shouldn't be an issue.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Raghavendra Kakarla <quic_rkakarla@quicinc.com> # qcm6490 with PREEMPT_RT set
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240527142557.321610-4-ulf.hansson@linaro.org
|
|
There is no need to hold the genpd-lock, while assigning the
dev->pm_domain. In fact, it becomes a problem on a PREEMPT_RT based
configuration as the genpd-lock may be a raw spinlock, while the lock
acquired through the call to dev_pm_domain_set() is a regular spinlock.
To fix the problem, let's simply move the calls to dev_pm_domain_set()
outside the genpd-lock.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Raghavendra Kakarla <quic_rkakarla@quicinc.com> # qcm6490 with PREEMPT_RT set
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240527142557.321610-3-ulf.hansson@linaro.org
|
|
To allow a genpd provider for a CPU PM domain to enter a domain-idle-state
during s2idle on a PREEMPT_RT based configuration, we can't use the regular
spinlock, as they are turned into sleepable locks on PREEMPT_RT.
To address this problem, let's convert into using the raw spinlock, but
only for genpd providers that have the GENPD_FLAG_CPU_DOMAIN bit set. In
this way, the lock can still be acquired/released in atomic context, which
is needed in the idle-path for PREEMPT_RT.
Do note that the genpd power-on/off notifiers may also be fired during
s2idle, but these are already prepared for PREEMPT_RT as they are based on
the raw notifiers. However, consumers of them may need to adopt accordingly
to work properly on PREEMPT_RT.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Raghavendra Kakarla <quic_rkakarla@quicinc.com> # qcm6490 with PREEMPT_RT set
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240527142557.321610-2-ulf.hansson@linaro.org
|
|
meson-gx-pwrc-vpu has been superseded by meson-ee-pwrc since
commit 53773f2dfd9c ("soc: amlogic: meson-ee-pwrc: add support for the Meson GX SoCs"),
so v5.8.
This driver is obsolete and no longer used or tested.
There is no reason to keep it around so remove it.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240730130227.712894-1-jbrunet@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
These clocks are already added to the list. Remove the duplicates ones.
Fixes: a67d780720ff ("genpd: imx: scu-pd: add more PDs")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240717080334.2210988-1-alexander.stein@ew.tq-group.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the pmdomain fixes for v6.10-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.11.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
'struct meson_secure_pwrc_domain_desc' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
4909 4072 0 8981 2315 drivers/pmdomain/amlogic/meson-secure-pwrc.o
After:
=====
text data bss dec hex filename
8605 392 0 8997 2325 drivers/pmdomain/amlogic/meson-secure-pwrc.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/871d6b708de8bb42e1fabd8a601dc9a9a217cf00.1719863475.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Now that genpd supports dynamically switching the control for an
attached device between hardware- and software-mode, let's add this
information to the genpd summary under managed by column in debugfs.
Suggested-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20240624044809.17751-3-quic_jkona@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some power-domains may be capable of relying on the HW to control the power
for a device that's hooked up to it. Typically, for these kinds of
configurations the consumer driver should be able to change the behavior of
power domain at runtime, control the power domain in SW mode for certain
configurations and handover the control to HW mode for other usecases.
To allow a consumer driver to change the behaviour of the PM domain for its
device, let's provide a new function, dev_pm_genpd_set_hwmode(). Moreover,
let's add a corresponding optional genpd callback, ->set_hwmode_dev(),
which the genpd provider should implement if it can support switching
between HW controlled mode and SW controlled mode. Similarly, add the
dev_pm_genpd_get_hwmode() to allow consumers to read the current mode and
its corresponding optional genpd callback, ->get_hwmode_dev(), which the
genpd provider can also implement to synchronize the initial HW mode
state in genpd_add_device() by reading back the mode from the hardware.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20240624044809.17751-2-quic_jkona@quicinc.com
|
|
Add support for the A5 power controller, whose registers are
in the secure domain and should be accessed via SMC.
Signed-off-by: Hongyu Chen <hongyu.chen1@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240627-a5_secpower-v1-2-1f47dde1270c@amlogic.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In the cases where the power domain connected to logics is allowed to
transition from a level(L)-->power collapse(0)-->retention(1) or
vice versa retention(1)-->power collapse(0)-->level(L) will cause the
logic to lose the configurations. The ARC does not support retention
to collapse transition on MxC rails.
The targets from SM8450 onwards the PLL logics of clock controllers are
connected to MxC rails and the recommended configurations are carried
out during the clock controller probes. The MxC transition as mentioned
above should be skipped to ensure the PLL settings are intact across
clock controller power on & off.
On older targets that do not split MX into MxA and MxC does not collapse
the logic and it is parked always at RETENTION, thus this issue is never
observed on those targets.
Cc: stable@vger.kernel.org # v5.17
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20240625-avoid_mxc_retention-v2-1-af9c2f549a5f@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
On x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pmdomain/amlogic/meson-gx-pwrc-vpu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pmdomain/amlogic/meson-ee-pwrc.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE().
This includes meson-secure-pwrc.c which, although it did not produce a
warning with the x86 allmodconfig configuration, may cause this
warning with other configurations where CONFIG_MESON_SM is enabled.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240610-md-drivers-pmdomain-amlogic-v1-1-b49ddb1a8bdf@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Set flag GENPD_FLAG_ACTIVE_WAKEUP to scmi genpd, then when a device
is set as wakeup source using device_set_wakeup_enable, the power
domain could be kept on to make sure the device could wakeup the system.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240514131833.911703-1-peng.fan@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use the scoped variant of for_each_child_of_node() to simplify cleanup
handling.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/5e684d7b236904e5f79324a5e5357c2930f7402d.1716974368.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use the genpd_is_irq_safe() helper instead of open-coding the same
operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/3cd8131b4f1284bdffa23a2b6a9a1e92fd17973e.1716973951.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add support for A4 power controller. A4 power control
registers are in secure domain, and should be accessed by SMC.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240529-a4_secpowerdomain-v2-2-47502fc0eaf3@amlogic.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- Fix regression in gpcv2 PM domain for i.MX8
* tag 'pmdomain-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: gpcv2: Add delay after power up handshake
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the amd-pstate driver and the operating performance point
(OPP) handling related to generic PM domains.
Specifics:
- Fix a memory leak in the exit path of amd-pstate (Peng Ma)
- Fix required_opp_tables handling in the cases when multiple generic
PM domains share one OPP table (Viresh Kumar)"
* tag 'pm-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
OPP: Fix required_opp_tables for multiple genpds using same table
cpufreq: amd-pstate: fix memory leak on CPU EPP exit
|
|
AudioMix BLK-CTRL on i.MX8MP encountered an accessing register issue
after power up.
[ 2.181035] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 2.181038] CPU: 1 PID: 48 Comm: kworker/u16:2 Not tainted 6.9.0-rc5-next-20240424-00003-g21cec88845c6 #171
[ 2.181047] Hardware name: NXP i.MX8MPlus EVK board (DT)
[ 2.181050] Workqueue: events_unbound deferred_probe_work_func
[ 2.181064] Call trace:
[...]
[ 2.181142] arm64_serror_panic+0x6c/0x78
[ 2.181149] do_serror+0x3c/0x70
[ 2.181157] el1h_64_error_handler+0x30/0x48
[ 2.181164] el1h_64_error+0x64/0x68
[ 2.181171] clk_imx8mp_audiomix_runtime_resume+0x34/0x44
[ 2.181183] __genpd_runtime_resume+0x30/0x80
[ 2.181195] genpd_runtime_resume+0x110/0x244
[ 2.181205] __rpm_callback+0x48/0x1d8
[ 2.181213] rpm_callback+0x68/0x74
[ 2.181224] rpm_resume+0x468/0x6c0
[ 2.181234] __pm_runtime_resume+0x50/0x94
[ 2.181243] pm_runtime_get_suppliers+0x60/0x8c
[ 2.181258] __driver_probe_device+0x48/0x12c
[ 2.181268] driver_probe_device+0xd8/0x15c
[ 2.181278] __device_attach_driver+0xb8/0x134
[ 2.181290] bus_for_each_drv+0x84/0xe0
[ 2.181302] __device_attach+0x9c/0x188
[ 2.181312] device_initial_probe+0x14/0x20
[ 2.181323] bus_probe_device+0xac/0xb0
[ 2.181334] deferred_probe_work_func+0x88/0xc0
[ 2.181344] process_one_work+0x150/0x290
[ 2.181357] worker_thread+0x2f8/0x408
[ 2.181370] kthread+0x110/0x114
[ 2.181381] ret_from_fork+0x10/0x20
[ 2.181391] SMP: stopping secondary CPUs
According to comments in power up handshake:
/* request the ADB400 to power up */
if (domain->bits.hskreq) {
regmap_update_bits(domain->regmap, domain->regs->hsk,
domain->bits.hskreq, domain->bits.hskreq);
/*
* ret = regmap_read_poll_timeout(domain->regmap, domain->regs->hsk, reg_val,
* (reg_val & domain->bits.hskack), 0,
* USEC_PER_MSEC);
* Technically we need the commented code to wait handshake. But that needs
* the BLK-CTL module BUS clk-en bit being set.
*
* There is a separate BLK-CTL module and we will have such a driver for it,
* that driver will set the BUS clk-en bit and handshake will be triggered
* automatically there. Just add a delay and suppose the handshake finish
* after that.
*/
}
The BLK-CTL module needs to add delay to wait for a handshake request finished.
For some BLK-CTL module (eg. AudioMix on i.MX8MP) doesn't have BUS clk-en
bit, it is better to add delay in this driver, as the BLK-CTL module doesn't
need to care about how it is powered up.
regmap_read_bypassed() is to make sure the above write IO transaction already
reaches target before udelay().
Fixes: 1496dd413b2e ("clk: imx: imx8mp: Add pm_runtime support for power saving")
Reported-by: Francesco Dolcini <francesco@dolcini.it>
Closes: https://lore.kernel.org/all/66293535.170a0220.21fe.a2e7@mx.google.com/
Suggested-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Tested-by: Adam Ford <aford173@gmail.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/1715396125-3724-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The required_opp_tables parsing is not perfect, as the OPP core does the
parsing solely based on the DT node pointers.
The core sets the required_opp_tables entry to the first OPP table in
the "opp_tables" list, that matches with the node pointer.
If the target DT OPP table is used by multiple devices and they all
create separate instances of 'struct opp_table' from it, then it is
possible that the required_opp_tables entry may be set to the incorrect
sibling device.
Unfortunately, there is no clear way to initialize the right values
during the initial parsing and we need to do this at a later point of
time.
Cross check the OPP table again while the genpds are attached and fix
them if required.
Also add a new API for the genpd core to fetch the device pointer for
the genpd.
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Reported-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218682
Co-developed-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the pmdomain fixes for v6.9-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.10.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When the dts file has multiple referrers to a single PD (e.g.
simple-framebuffer and dss nodes both point to the DSS power-domain) the
ti-sci driver will create two power domains, both with the same ID, and
that will cause problems as one of the power domains will hide the other
one.
Fix this checking if a PD with the ID has already been created, and only
create a PD for new IDs.
Fixes: efa5c01cd7ee ("soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240415-ti-sci-pd-v1-1-a0e56b8ad897@ideasonboard.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
There is no longer any need to clear genpd->suspended_count in
genpd_prepare(), as it should be correctly incremented and decremented for
all cases. In fact, if the counter isn't correctly managed we would be
hiding a problem that we shouldn't. Therefore, let's not clear it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240412104208.74361-2-ulf.hansson@linaro.org
|
|
During system suspend we may try to enter a low power-state for the genpd
in question. Let's take this into account for the statistics too, by
updating the rejected/usage counters for the corresponding state.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240412104208.74361-1-ulf.hansson@linaro.org
|
|
R-Car M3-W needs a delay of 1 µs before powering off the A3IR and A3VC
power domains. Add support for this using a new flag, which indicates
that a power area is subject to this quirk.
Inspired by a patch in the BSP by Dien Pham.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/ecbc3465c598084c904dd3714e2894463094ed9a.1713348705.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
There are no more users left of the rcar_sysc_nullify() helper, so it
can be removed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/ad61b09283cc8a9cf93a5ea9fffd1cb283b9db92.1713348705.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Currently R-Car M3-W and M3-W+ are handled by a single sub-driver,
but using separate Kconfig symbols and separate rcar_sysc_info
structures, and fixup code to handle the remaining differences.
Prepare for handling more differences by splitting them in two separate
sub-drivers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/a416e2bae7227c08d7e7d158366ab021f4d6cc18.1713348705.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Until commit 7e8a50df26f4e700 ("soc: renesas: rcar-sysc: Drop legacy
handling") in v4.19, the rcar_sysc_ch structure was part of the API for
legacy board code not yet using DT. Since then, there is no longer a
reason to keep it as a separate structure.
Moreover, a future quirk handling will need access to the rcar_sysc_pd
structure's flags member in rcar_sysc_pwr_on_off(). Hence absorb the
rcar_sysc_ch structure into the rcar_sysc_pd structure, and pass around
the latter instead of the former.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/672805a8c52ce63200e342212bbe6f84a445397b.1713348705.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add buck isolation setting to ADSP_AO, CAM_VCORE and IMG_VCORE power
domains in MT8188 for proper buck isolation control in power domain
on/off.
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240329044142.3095193-1-fshao@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Core in platform_driver_register() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240330211036.100956-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"Core:
- Log a message when unused PM domains gets disabled
- Scale down parent/child performance states in the reverse order
Providers:
- qcom: rpmpd: Add power domains support for MSM8974, MSM8974PRO,
PMA8084 and PM8841
- renesas: rcar-gen4-sysc: Reduce atomic delays
- renesas: rcar-sysc: Adjust the waiting time to cover the worst case
- renesas: r8a779h0-sysc: Add support for the r8a779h0 PM domains
- imx: imx8mp-blk-ctrl: Add the fdcc clock to the hdmimix domains
- imx: imx8mp-blk-ctrl: Error out if domains are missing in DT
Improve support for multiple PM domains:
- Add two helper functions to attach/detach multiple PM domains
- Convert a couple of drivers to use the new helper functions"
* tag 'pmdomain-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (22 commits)
pmdomain: renesas: rcar-gen4-sysc: Reduce atomic delays
pmdomain: renesas: Adjust the waiting time to cover the worst case
pmdomain: qcom: rpmpd: Add MSM8974PRO+PMA8084 power domains
pmdomain: qcom: rpmpd: Add MSM8974+PM8841 power domains
pmdomain: core: constify of_phandle_args in add device and subdomain
pmdomain: core: constify of_phandle_args in xlate
media: venus: Convert to dev_pm_domain_attach|detach_list() for vcodec
remoteproc: qcom_q6v5_adsp: Convert to dev_pm_domain_attach|detach_list()
remoteproc: imx_rproc: Convert to dev_pm_domain_attach|detach_list()
remoteproc: imx_dsp_rproc: Convert to dev_pm_domain_attach|detach_list()
PM: domains: Add helper functions to attach/detach multiple PM domains
pmdomain: imx8mp-blk-ctrl: imx8mp_blk: Add fdcc clock to hdmimix domain
pmdomain: mediatek: Use devm_platform_ioremap_resource() in init_scp()
pmdomain: renesas: r8a779h0-sysc: Add r8a779h0 support
pmdomain: imx8mp-blk-ctrl: Error out if domains are missing in DT
pmdomain: ti: Add a null pointer check to the omap_prm_domain_init
pmdomain: renesas: rcar-gen4-sysc: Remove unneeded includes
pmdomain: core: Print a message when unused power domains are disabled
pmdomain: qcom: rpmpd: Keep one RPM handle for all RPMPDs
pmdomain: core: Scale down parent/child performance states in reverse order
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This is the usual mix of updates for drivers that are used on (mostly
ARM) SoCs with no other top-level subsystem tree, including:
- The SCMI firmware subsystem gains support for version 3.2 of the
specification and updates to the notification code
- Feature updates for Tegra and Qualcomm platforms for added hardware
support
- A number of platforms get soc_device additions for identifying
newly added chips from Renesas, Qualcomm, Mediatek and Google
- Trivial improvements for firmware and memory drivers amongst
others, in particular 'const' annotations throughout multiple
subsystems"
* tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
tee: make tee_bus_type const
soc: qcom: aoss: add missing kerneldoc for qmp members
soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
soc: qcom: spm: fix building with CONFIG_REGULATOR=n
bus: ti-sysc: constify the struct device_type usage
memory: stm32-fmc2-ebi: keep power domain on
memory: stm32-fmc2-ebi: add MP25 RIF support
memory: stm32-fmc2-ebi: add MP25 support
memory: stm32-fmc2-ebi: check regmap_read return value
dt-bindings: memory-controller: st,stm32: add MP25 support
dt-bindings: bus: imx-weim: convert to YAML
watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
MAINTAINERS: Update SCMI entry with HWMON driver
MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC
memory: tegra: Fix indentation
memory: tegra: Add BPMP and ICC info for DLA clients
memory: tegra: Correct DLA client names
dt-bindings: memory: renesas,rpc-if: Document R-Car V4M support
firmware: arm_scmi: Update the supported clock protocol version
...
|