| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix issues in two cpufreq drivers, in the AMD P-state driver and
in the power-capping DTPM framework.
Specifics:
- Fix the AMD P-state driver's EPP sysfs interface in the cases when
the performance governor is in use (Ayush Jain)
- Make the ->fast_switch() callback in the AMD P-state driver return
the target frequency as expected (Gautham R. Shenoy)
- Allow user space to control the range of frequencies to use via
scaling_min_freq and scaling_max_freq when AMD P-state driver is in
use (Wyes Karny)
- Prevent power domains needed for wakeup signaling from being turned
off during system suspend on Qualcomm systems and prevent
performance states votes from runtime-suspended devices from being
lost across a system suspend-resume cycle in qcom-cpufreq-nvmem
(Stephan Gerhold)
- Fix disabling the 792 Mhz OPP in the imx6q cpufreq driver for the
i.MX6ULL types that can run at that frequency (Christoph
Niedermaier)
- Eliminate unnecessary and harmful conversions to uW from the DTPM
(dynamic thermal and power management) framework (Lukasz Luba)"
* tag 'pm-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Only print supported EPP values for performance governor
cpufreq/amd-pstate: Fix scaling_min_freq and scaling_max_freq update
powercap: DTPM: Fix unneeded conversions to micro-Watts
cpufreq/amd-pstate: Fix the return value of amd_pstate_fast_switch()
pmdomain: qcom: rpmpd: Set GENPD_FLAG_ACTIVE_WAKEUP
cpufreq: qcom-nvmem: Preserve PM domain votes in system suspend
cpufreq: qcom-nvmem: Enable virtual power domain devices
cpufreq: imx6q: Don't disable 792 Mhz OPP unnecessarily
|
|
It was a mistake to prefer polling based mode when setting a performance
level for a domain. Let's instead rely on the protocol to decide what is
best and thus avoid polling when possible.
Reported-by: Nikunj Kela <nkela@quicinc.com>
Fixes: 2af23ceb8624 ("pmdomain: arm: Add the SCMI performance domain")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20231127135033.136442-1-ulf.hansson@linaro.org
|
|
Set GENPD_FLAG_ACTIVE_WAKEUP for all RPM power domains so that power
domains necessary for wakeup/"awake path" devices are kept on across
suspend.
This is needed for example for the *_AO ("active-only") variants of the
RPMPDs used by the CPU. Those should maintain their votes also across
system suspend to ensure the CPU can keep running for the whole suspend
process (ending in a firmware call). When the RPM firmware detects that
the CPUs are in a deep idle state it will drop those votes automatically.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware
drivers.
- Arm FF-A firmware support gains support for v1.1 specification
features, in particular notification and memory transaction
descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper"
* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: samsung: exynos-chipid: Convert to platform remove callback returning void
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
soc: ti: k3-socinfo: Avoid overriding return value
soc: ti: k3-socinfo: Fix typo in bitfield documentation
soc: ti: knav_qmss_queue: Use device_get_match_data()
firmware: ti_sci: Use device_get_match_data()
firmware: qcom: qseecom: add missing include guards
soc/pxa: ssp: Convert to platform remove callback returning void
soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
soc/loongson: loongson2_guts: Convert to platform remove callback returning void
soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
...
|
|
Merge the pmdomain fixes for v6.6-rc[n] into the next branch, to allow them to
get tested together with the new pmdomain changes that are targeted for v6.7.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Without this change, the NPU hangs when the 8th NN core is used.
It matches what the out-of-tree driver does.
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Fixes: 9a217b7e8953 ("soc: amlogic: meson-pwrc: Add NNA power domain for A311D")
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231016080205.41982-2-tomeu@tomeuvizoso.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add the power domains exposed by RPMH in the Qualcomm SC8380XP platform.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231025135943.13854-4-quic_sibis@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add RPMh Power Domains support for the SM8650 platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-rpmpd-v1-2-f25d313104c6@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the pmdomain fixes for v6.6-rc[n] into the next branch, to allow them to
get tested together with the new pmdomain changes that are targeted for v6.7.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Currently, The imx pgc power domain doesn't set the fwnode
pointer, which results in supply regulator device can't get
consumer imx pgc power domain device from fwnode when creating
a link.
This causes the driver core to instead try to create a link
between the parent gpc device of imx pgc power domain device and
supply regulator device. However, at this point, the gpc device
has already been bound, and the link creation will fail. So adding
the fwnode pointer to the imx pgc power domain device will fix
this issue.
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Tested-by: Emil Kronborg <emil.kronborg@protonmail.com>
Fixes: 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231020185949.537083-1-pengfei.li_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
QM215 is typically paired with a PM8916 PMIC and uses its SMPA1 and
LDOA2 regulators in voltage level mode for VDDCX and VDDMX, respectively.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231014133823.14088-4-otto.pflueger@abscue.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
MSM8917 uses the SMPA2 and LDOA3 regulators provided by the PM8937 PMIC
for the VDDCX and VDDMX power domains in voltage level mode,
respectively. These definitions should also work on MSM8937.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231014133823.14088-3-otto.pflueger@abscue.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The commit c494a447c14e ("soc: bcm: bcm2835-power: Refactor ASB control")
refactored the ASB control by using a general function to handle both
the enable and disable. But this patch introduced a subtle regression:
we need to check if !!(readl(base + reg) & ASB_ACK) == enable, not just
check if (readl(base + reg) & ASB_ACK) == true.
Currently, this is causing an invalid register state in V3D when
unloading and loading the driver, because `bcm2835_asb_disable()` will
return -ETIMEDOUT and `bcm2835_asb_power_off()` will fail to disable the
ASB slave for V3D.
Fixes: c494a447c14e ("soc: bcm: bcm2835-power: Refactor ASB control")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231024101251.6357-2-mcanal@igalia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Since commit 7c41cdcd3bbe ("OPP: Simplify the over-designed pstate <->
level dance"), there is no longer any need for genpd providers to assign
the ->opp_to_performance_state(), hence let's drop it.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231012153607.101465-1-ulf.hansson@linaro.org
|
|
Since commit 7c41cdcd3bbe ("OPP: Simplify the over-designed pstate <->
level dance"), there is no longer any need for genpd providers to assign
the ->opp_to_performance_state(), hence let's drop it.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231012153558.101445-1-ulf.hansson@linaro.org
|
|
Since commit 7c41cdcd3bbe ("OPP: Simplify the over-designed pstate <->
level dance"), there is no longer any need for genpd providers to assign
the ->opp_to_performance_state(), hence let's drop it.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231012153550.101425-1-ulf.hansson@linaro.org
|
|
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006224614.444488-1-robh@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the pmdomain fixes for v6.6-rc[n] into the next branch, to allow them
to get tested together with the new pmdomain changes that are targeted for
v6.7.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
for_each_node_with_property performs an of_node_get on
each iteration, so a break out of the loop requires an
of_node_put.
This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20230907095521.14053-5-Julia.Lawall@inria.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add the needed board data to support MT8365 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230918093751.1188668-9-msp@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This adds support for MTK_SCPD_STRICT_BUS_PROTECTION capability. It is a
strict bus protection policy that requires the bus protection to be
disabled before accessing the bus.
This is required by the mt8365, for the MM power domain.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230918093751.1188668-8-msp@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This updates the power domain to support WAY_EN operations. WAY_EN
operations on mt8365 are using a different component to check for the
acknowledgment, namely the infracfg-nao component. Also to enable a way
it the bit needs to be cleared while disabling a way needs a bit to be
set. To support these two operations two flags are added,
BUS_PROT_INVERTED and BUS_PROT_STA_COMPONENT_INFRA_NAO. Additionally
another regmap is created if the INFRA_NAO capability is set.
This operation is required by the mt8365 for the MM power domain.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230918093751.1188668-7-msp@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use flags to distinguish between infracfg and smi subsystem for a bus
protection configuration. It simplifies enabling/disabling and prepares
the driver for the use of another regmap for mt8365.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230918093751.1188668-6-msp@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Separate the register access used for bus protection enable/disable into
their own functions. These will be used later for WAY_EN support.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230918093751.1188668-5-msp@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
bus_prot_mask is used for all operations, set clear and acknowledge. In
preparation of m8365 power domain support split this one mask into two,
one mask for set and clear, another one for acknowledge.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230918093751.1188668-4-msp@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To simplify the macros, use a flags field for simple bools. This is in
preparation for more flags.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230918093751.1188668-3-msp@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To allow a consumer driver to use the OPP library to scale the performance
for its device, let's dynamically add the OPP table when the device gets
attached to its SCMI performance domain.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230925131715.138411-10-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Per "dt-bindings/firmware/imx/rsrc.h", `IMX_SC_R_DMA_2_CH0 + 5` not
equals to IMX_SC_R_DMA_2_CH5, so there should be two entries in
imx8qxp_scu_pd_ranges, otherwise the imx_scu_add_pm_domain may filter
out wrong power domains.
Fixes: 927b7d15dcf2 ("genpd: imx: scu-pd: enlarge PD range")
Reported-by: Dong Aisheng <Aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20231001123853.200773-1-peng.fan@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use "JH7110_AON_PD_" prefix for AON power doamin for JH7110 SoC.
Reviewed-by: Walker Chen <walker.chen@starfivetech.com>
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://lore.kernel.org/r/20230927130734.9921-3-changhuang.liang@starfivetech.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This adds the RPMH clocks present in SM7150 SoC.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230916175952.178611-3-danila@jiaxyga.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When building with clang 18 I see the following warning:
| drivers/soc/renesas/rmobile-sysc.c:193:22: warning: cast to smaller integer
| type 'enum pd_types' from 'const void *' [-Wvoid-pointer-to-enum-cast]
| 193 | add_special_pd(np, (enum pd_types)id->data);
This is due to the fact that `id->data` is a void* and `enum pd_types`
has the size of an integer. This cast from pointer-width to int-width
causes truncation and possible data loss. Instead, cast to `uintptr_t`
which has the same width as void*.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1910
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230814-void-drivers-soc-renesas-rmobile-sysc-v1-1-6648dfd854de@google.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Kconfig option belongs closer to the corresponding implementation,
hence let's move it from the soc subsystem to the pmdomain subsystem.
Cc: Michal Simek <michal.simek@amd.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The TI_SCI_PM_DOMAINS Kconfig option belongs closer to its corresponding
implementation, hence let's move it from the soc subsystem to the pmdomain
subsystem.
While at it, let's also add a Kconfig option the omap_prm driver, rather
than using ARCH_OMAP2PLUS directly.
Cc: Nishanth Menon <nm@ti.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Tero Kristo <kristo@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Kconfig option belongs closer to the corresponding implementation,
hence let's move it from the soc subsystem to the pmdomain subsystem.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: <linux-tegra@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Kconfig option belongs closer to the corresponding implementation,
hence let's move it from the soc subsystem to the pmdomain subsystem.
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: <linux-sunxi@lists.linux.dev>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Kconfig belongs closer to the corresponding implementation, hence let's
move it from the soc subsystem to the pmdomain subsystem.
Cc: Walker Chen <walker.chen@starfivetech.com>
Cc: Conor Dooley <conor@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
We shouldn't really use the CONFIG_ARCH_U8500 option directly, but rather
have our own dedicated Kconfig option, so let's add that.
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Kconfig option belongs closer to the corresponding implementation,
hence let's move it from the soc subsystem to the pmdomain subsystem.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: <linux-samsung-soc@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Kconfig option belongs closer to the corresponding implementation,
hence let's move it from the soc subsystem to the pmdomain subsystem.
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: <linux-rockchip@lists.infradead.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc subsystem to the pmdomain subsystem.
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: <linux-renesas-soc@vger.kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc subsystem to the pmdomain subsystem.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: <linux-arm-msm@vger.kernel.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc subsystem to the pmdomain subsystem.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: <linux-mediatek@lists.infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc- and firmware subsystem to the pmdomain
subsystem.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: <kernel@pengutronix.de>
Cc: <linux-imx@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To simplify with maintenance let's move the Arm SCMI power-domain driver
to the new pmdomain directory.
Link: https://lore.kernel.org/all/20230921113328.3208651-1-sudeep.holla@arm.com
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
To enable support for performance scaling (DVFS) for generic devices with
the SCMI performance protocol, let's add an SCMI performance domain. This
is being modelled as a genpd provider, with support for performance scaling
through genpd's ->set_performance_state() callback.
Note that, this adds the initial support that allows consumer drivers for
attached devices, to vote for a new performance state via calling the
dev_pm_genpd_set_performance_state(). However, this should be avoided as
it's in most cases preferred to use the OPP library to vote for a new OPP
instead. The support using the OPP library isn't part of this change, but
needs to be implemented from subsequent changes.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230919121605.7304-1-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc subsystem to the pmdomain subsystem.
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: <linux-mips@vger.kernel.org>
Cc: <linux-rpi-kernel@lists.infradead.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Kconfig option belongs closer to the corresponding implementation,
hence let's move it from the soc subsystem to the pmdomain subsystem.
Cc: Hector Martin <marcan@marcan.st>
Cc: Sven Peter <sven@svenpeter.dev>
Cc: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Cc: <asahi@lists.linux.dev>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc subsystem to the pmdomain subsystem.
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: <linux-amlogic@lists.infradead.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Kconfig belongs closer to the corresponding implementation, hence let's
move it from the soc subsystem to the pmdomain subsystem.
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: <linux-actions@lists.infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Rather than having the various Kconfig files for the genpd providers
sprinkled across subsystems, let's prepare to move them into the pmdomain
subsystem along with the implementations.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
