summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
2018-09-26pinctrl: qcom: Add qcs404 pinctrl driverAvaneesh Kumar Dwivedi3-0/+1706
Add initial pinctrl driver to support pin configuration with pinctrl framework for qcs404. Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org> Signed-off-by: Chintan Pandya <cpandya@codeaurora.org> Signed-off-by: Anu Ramanathan <anur@codeaurora.org> [bjorn: Reworked tile handling and did some minor rework] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-26pinctrl: qcom: Support dispersed tilesBjorn Andersson2-9/+25
On some new platforms the tiles have been placed too far apart to be covered in a single ioremap. Turn "regs" into an array of base addresses and make the pingroup carry the information about which tile the pin resides in. For existing platforms we map the first entry regs and the existing pingroups will all use tile 0, meaning that there's no functional change. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-26pinctrl: qcom: Introduce readl/writel accessorsBjorn Andersson1-36/+54
In preparation for the support for dispersed tiles move all readl and writel calls to helper functions. This will allow us to isolate the added complexity of another indirection. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-26pinctrl: qcom: Add sdm660 pinctrl driverNeeraj Upadhyay3-0/+1465
Add initial pinctrl driver to support pin configuration with pinctrl framework for sdm660. Based off CAF implementation. Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org> Co-Developed-by: Venkatesh Yadav Abbarapu <vabbar@codeaurora.org> Signed-off-by: Venkatesh Yadav Abbarapu <vabbar@codeaurora.org> [craig: minor updates for upstreaming, updated tile handling] Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-25pinctrl: intel: merrifield: Group IO accessors in codeAndy Shevchenko1-15/+15
Consolidate IO accessors in the code to make maintenance a little bit easier in the future. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-25pinctrl: intel: merrifield: Introduce mrfld_read_bufcfg()Andy Shevchenko1-7/+19
mrfld_read_bufcfg() helper checks if pin is correct and reads back the current value of corresponding BUFCFG register. While it adds lines of code it will be easier to maintain in the future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21pinctrl: sunxi: fix 'pctrl->functions' allocation in sunxi_pinctrl_build_stateYueHaibing1-6/+9
fixes following Smatch static check warning: ./drivers/pinctrl/sunxi/pinctrl-sunxi.c:1112 sunxi_pinctrl_build_state() warn: passing devm_ allocated variable to kfree. 'pctrl->functions' As we will be calling krealloc() on pointer 'pctrl->functions', which means kfree() will be called in there, devm_kzalloc() shouldn't be used with the allocation in the first place. Fix the warning by calling kcalloc() and managing the free procedure in error path on our own. Fixes: 0e37f88d9ad8 ("ARM: sunxi: Add pinctrl driver for Allwinner SoCs") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21pinctrl: mediatek: add eint support to MT6765 pinctrl driverMars Cheng1-0/+8
Just add eint support to MT6765 pinctrl driver as usual as happens on the other SoCs. Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21pinctrl: mediatek: add MT6765 pinctrl driverZH Chen4-0/+2862
Add MT6765 pinctrl driver based on MediaTek pinctrl-paris core. Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: ZH Chen <zh.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21pinctrl: mediatek: add no eint function for pin defineMars Cheng1-0/+1
Add NO_EINT_SUPPORT back to pinctrl-mtk-common-v2.h as the alias of EINT_NA to indicate that some pin not capable of being controlled as eint and that is required by pinctrl-paris based driver as old pinctrl-mtk-common.h already had. Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21pinctrl: mediatek: fix static checker warning caused by EINT_NASean Wang1-1/+1
EINT_NA is an u16 number, so it should be U16_MAX instead of -1 to fix up drivers/pinctrl/mediatek/pinctrl-paris.c:732 mtk_gpio_to_irq() warn: impossible condition (desc->eint.eint_n == -1) => (0-u16max == (-1)) Also happens in drivers/pinctrl/mediatek/pinctrl-paris.c:749 mtk_gpio_set_config() warn: impossible condition (desc->eint.eint_n == -1) => (0-u16max == (-1)) drivers/pinctrl/mediatek/pinctrl-moore.c:479 mtk_gpio_to_irq() warn: impossible condition (desc->eint.eint_n == -1) => (0-u16max == (-1)) drivers/pinctrl/mediatek/pinctrl-moore.c:496 mtk_gpio_set_config() warn: impossible condition '(desc->eint.eint_n == -1) => (0-u16max == (-1)) Fixes: 6561859b067f ("pinctrl: mediatek: add eint support to MT8183 pinctrl driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21pinctrl: mediatek: moore: fix return value check in mtk_moore_pinctrl_probe()Wei Yongjun1-4/+4
In case of error, the function devm_kmalloc_array() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: b7d7f9eeca55 ("pinctrl: mediatek: extend struct mtk_pin_desc which per-pin driver depends on") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21pinctrl: mediatek: make symbol 'mtk_drive' staticWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:37:29: warning: symbol 'mtk_drive' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21pinctrl: mediatek: paris: fix return value check in mtk_paris_pinctrl_probe()Wei Yongjun1-4/+4
In case of error, the function devm_kmalloc_array() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21pinctrl: qcom: spmi-mpp: Fix err handling of pmic_mpp_set_muxYueHaibing1-0/+2
'ret' should be returned while pmic_mpp_write_mode_ctl fails. Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21pinctrl: mxs: do not export mxs_pinctrl_probeFabio Estevam1-1/+0
No user of mxs_pinctrl_probe() can be built as a module, hence exporting the symbol is not necessary. Drop EXPORT_SYMBOL_GPL. Inspired by a patch from Stefan Agner for the tegra pinctrl driver. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-20pinctrl: tegra: do not export tegra_pinctrl_probeStefan Agner1-1/+0
No user of tegra_pinctrl_probe can be built as a module, hence exporting the symbol is not necessary. Drop EXPORT_SYMBOL_GPL. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mtk: Fix up GPIO includesLinus Walleij6-5/+5
Include only <linux/gpio/driver.h> since this is a driver, not a consumer. Cc: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: cherryview: Remove linux/init.h and sort headersAndy Shevchenko1-4/+4
There is no need to include linux/init.h when at the same time we include linux/module.h. Remove redundant inclusion. While here, sort header block alphabetically for easy maintenance. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: cherryview: Describe members of couple of structsAndy Shevchenko1-0/+3
Compiler unsatisfied to see half described data structures and issues warnings: drivers/pinctrl/intel/pinctrl-cherryview.c:136: warning: Function parameter or member 'acpi_space_id' not described in 'chv_community' drivers/pinctrl/intel/pinctrl-cherryview.c:169: warning: Function parameter or member 'saved_intmask' not described in 'chv_pinctrl' drivers/pinctrl/intel/pinctrl-cherryview.c:169: warning: Function parameter or member 'saved_pin_context' not described in 'chv_pinctrl' To satisfy it, describe mentioned members. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: cherryview: Remove unused groups of pinsAndy Shevchenko1-2/+0
For the long time no one complained about unused groups of pins for fSPI and SMBUS. Remove them for good and at the same time satisfy compiler, otherwise get warning: CC drivers/pinctrl/intel/pinctrl-cherryview.o drivers/pinctrl/intel/pinctrl-cherryview.c:285:23: warning: ‘southwest_smbus_pins’ defined but not used [-Wunused-const-variable=] static const unsigned southwest_smbus_pins[] = { 79, 81, 82 }; ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/intel/pinctrl-cherryview.c:269:23: warning: ‘southwest_fspi_pins’ defined but not used [-Wunused-const-variable=] static const unsigned southwest_fspi_pins[] = { 0, 1, 2, 3, 4, 5, 6, 7 }; ^~~~~~~~~~~~~~~~~~~ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: cherryview: Re-use data structures from pinctrl-intel.hAndy Shevchenko1-42/+25
We have some data structures duplicated across the drivers. Let's deduplicate them by using ones that being provided by pinctrl-intel.h. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: baytrail: Sort headers alphabeticallyAndy Shevchenko1-7/+7
Sort header block alphabetically for easy maintenance. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: baytrail: Remove unneeded MODULE_DEVICE_TABLE()Andy Shevchenko1-1/+0
Since the driver can't be compiled as a module, there is no need to use no-op macros in the code. Thus, remove unneeded MODULE_DEVICE_TABLE() macro from the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: intel: Move linux/pm.h to the local headerAndy Shevchenko9-8/+8
We now using a common macro for PM operations in pin control drivers for Intel SoCs, and since that macro relies on the definition and macro from linux/pm.h header file, it's logical to include it directly in pinctrl-intel.h. Otherwise it's a bit fragile and requires a proper ordering of header inclusion in C files. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19Merge branch 'ib-mtk' into develLinus Walleij12-1190/+6833
2018-09-19pinctrl: mediatek: add eint support to MT8183 pinctrl driverSean Wang2-0/+30
Just add eint support to MT8183 pinctrl driver as usual as happens on the other SoCs. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: extend eint build to pinctrl-mtk-common-v2.cSean Wang3-124/+137
Almost all MediaTek SoCs apply the exact same logic to build eint, so move the common functions into pinctrl-mtk-common-v2.c to allow each new pinctrl driver to reuse them. Also, add a protection checker on hw->soc->eint_hw to avoid invalid memory access when there's certain SoC not to define its eint_hw properly in the code flow. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pintcrl: mediatek: add pull tweaks for I2C related pins on MT8183Zhiyong Tao1-0/+24
This patch provides the advanced pull for I2C used pins on MT8183. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: extend advanced pull support in pinctrl-mtk-common-v2.cSean Wang1-5/+32
Extend the advanced pull based on the legacy bias plus additional r0 and r1 to tweak the resistor level. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: add MT8183 pinctrl driverZhiyong Tao4-0/+2436
Add MT8183 pinctrl driver based on MediaTek pinctrl-paris core. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindingsZhiyong Tao5-0/+967
Add pinctrl-paris core that implements vendor dt-binding which MediaTek tablet, box and smartphone-based SoCs such as MT81xx, MT27xx, and MT67xx SoCs really want to depend on. The driver is just completely rewritten according to pinctrl-mtk-common.c but uses the new logic from pinctrl-mtk-common-v2.c to have an elegant way to support new SoCs in the future. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: extend struct mtk_pin_desc which per-pin driver depends onSean Wang5-20/+62
Because the pincrl-mtk-common.c is an implementation for per-pin binding, its pin descriptor includes more information than pinctrl-mtk-common-v2 so far can support. So, we complement these data before writing a driver using pincrl-mtk-common-v2.c for per-pin binding. By the way, the size of struct mtk_pin_desc would be larger than struct pinctrl_pin_desc can hold, so it's necessary to have a copy before the pins information is being registered into the core. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: adjust error code and message when some register not ↵Sean Wang1-17/+18
supported is found It's usual and not an error for there's some register not supported by a certain SoC or a pin so that in the case we have to adjust the message to print and the error code to get rid of unnecessary false alarm. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: add multiple register bases support to ↵Sean Wang5-33/+75
pinctrl-mtk-common-v2.c Certain SoC own multiple register base for accessing each pin groups, it's easy to be done with extend struct mtk_pin_field_calc to support the kind of SoC such as MT8183. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: use pin descriptor all in pinctrl-mtk-common-v2.cSean Wang3-60/+88
all use pin descriptor instead in pinctrl-mtk-common-v2.c for the consistency and extensibility. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: add MT7623 pinctrl driver based on generic pinctrl bindingSean Wang3-0/+1447
Adding MT7623 pinctrl driver based on generic pinctrl binding, that is good example and demonstrates how to port any other MediaTek SoCs pinctrl-moore core when people really would like to use the generic pinctrl binding to support these MediaTek SoCs. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: add pullen, pullsel register support to ↵Sean Wang2-0/+91
pinctrl-mtk-common-v2.c Certain SoCs have to program an extra PULLEN, PULLSEL register to configure bias related function so that we add it in the existing path. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: add ies register support to pinctrl-mtk-common-v2.cSean Wang3-7/+22
Certain SoCs have to program an extra IES register to configure input enabled mode so that we add it in the existing path as an option. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: add advanced pull related support to pinctrl-mtk-common-v2.cSean Wang3-0/+105
There are some specific pins (i.e. MMC/SD) need specific registers to turn on/off the 10K & 50k(75K) resistors when pull up/down. Therefore, this patch adds the custom prarmeters so that the user could control it through device tree. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: add pull related support to pinctrl-mtk-common-v2.cSean Wang4-29/+148
Put pull control support related functions to pinctrl-mtk-common-v2.c as these operations might be different by chips and allow different type of driver to reuse them. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: add drv register support to pinctrl-mtk-common-v2.cSean Wang2-0/+43
Certain SoCs have to program DRV register to configure driving strength so that we add it in the existing path as an option. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: add driving strength related support to ↵Sean Wang4-31/+112
pinctrl-mtk-common-v2.c Put driving strength support related functions to pinctrl-mtk-common-v2.c as these operations might be different by chips and allow different type of driver to reuse them. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: extend struct mtk_pin_soc to pinctrl-mtk-common-v2.cSean Wang3-3/+8
Add two parameters gpio_m and eint_m for configuring GPIO mode and EINT mode, they might be varying depend on SoC. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: extend struct mtk_pin_desc to pinctrl-mtk-common-v2.cSean Wang4-115/+183
This patch introduces a data structure mtk_pin_desc, which is used to provide information per pin characteristic such as driving current, eint number and a driving index, that is used to lookup table describing the details about the groups of driving current by which the pin is able to adjust the driving strength so that the driver could get the appropriate driving group when calls .pin_config_get()/set(). Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: extend struct mtk_pin_field_calc to pinctrl-mtk-common-v2.cSean Wang3-126/+126
This patch adds members sz_reg fixed in struct mtk_pin_field_calc - The 'fixed' is used to represent the consecutive pins share the same bits within the same register with the 1st pin so that it can largely reduce the entry size a bit. - The 'sz_reg' is used to indicate the range of bits we use in a register that may vary by SoC The above changes make the code more generic and this is useful as there might be other existing or future chips all use the same logic to access their register set and then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: add pinctrl-moore that implements the generic pinctrl ↵Sean Wang5-719/+754
dt-bindings Add a generic driver pinctrl-moore.c for MT762x SoC and any other SoC that would like to use generic dt-binding. The patch is furtherly refactored from pinctrl-mt7622.c that totally uses the functions back by the generic pinctrl core such as GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS and its binding also completely follows up pinctrl-bindings.txt in Documentation/devicetree/bindings/pinctrl/ to implement. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-19pinctrl: mediatek: add pinctrl-mtk-common-v2 for all MediaTek pinctrlsSean Wang4-250/+273
Irregular register arrangement and distinct logic access from various MediaTek SoCs would cause pinctrl-mtk-common to bloat and really hard to maintain in the future so that the patch creates pinctrl-mtk-common-v2 based on the core of mt7622-pinctrl. The goals pinctrl-mtk-common-v2 want to achieve are to hopefully support all of MediaTek SoCs, and two kinds of dt-bindings being supported, Linux generic pinctrl dt-binding mt7622 supports and MediaTek per-pin dt-binding the other SoCs support the MT8183 and MT6765 incline to make use of. The patch starts to refactor MT7622 pinctrl driver first with splitting out these portable ways from there such as table-based register operation and drive strength control that is common in both kinds of driver. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-14pinctrl: Include <linux/gpio/driver.h> nothing elseLinus Walleij32-41/+33
These drivers are GPIO drivers, and the do not need to use the legacy header in <linux/gpio.h>, go directly for <linux/gpio/driver.h> instead. Replace any use of GPIOF_* with 0/1, these flags are for consumers, not drivers. Get rid of a few gpio_to_irq() users that was littering around the place, use local callbacks or avoid using it at all. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-14pinctrl: at91-pio4: Get rid of legacy callLinus Walleij1-11/+10
By just moving the atmel_gpio_to_irq() and calling the internal function we can get rid of the driver calling back out into the deprecated external consumer API. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-14 05:30:30 +0300